The path needs to be set to refer to the build directory, not the
current directory, because that's actually the source directory at
that point.
fix for 6abc8c2596
Formerly we just relied on operator classes that assert longValuesOK
to eventually shorten the leaf value enough to fit on an index page.
That fails since the introduction of INCLUDE-column support (commit
09c1c6ab4), because the INCLUDE columns might alone take up more
than a page, meaning no amount of leaf-datum compaction will get
the job done. At least with spgtextproc.c, that leads to an infinite
loop, since spgtextproc.c won't throw an error for not being able
to shorten the leaf datum anymore.
To fix without breaking cases that would otherwise work, add logic
to spgdoinsert() to verify that the leaf tuple size is decreasing
after each "choose" step. Some opclasses might not decrease the
size on every single cycle, and in any case, alignment roundoff
of the tuple size could obscure small gains. Therefore, allow
up to 10 cycles without additional savings before throwing an
error. (Perhaps this number will need adjustment, but it seems
quite generous right now.)
As long as we've developed this logic, let's back-patch it.
The back branches don't have INCLUDE columns to worry about, but
this seems like a good defense against possible bugs in operator
classes. We already know that an infinite loop here is pretty
unpleasant, so having a defense seems to outweigh the risk of
breaking things. (Note that spgtextproc.c is actually the only
known opclass with longValuesOK support, so that this is all moot
for known non-core opclasses anyway.)
Per report from Dilip Kumar.
Discussion: https://postgr.es/m/CAFiTN-uxP_soPhVG840tRMQTBmtA_f_Y8N51G7DKYYqDh7XN-A@mail.gmail.com
Also "make reformat-dat-files".
The only change worthy of note is that pgindent messed up the formatting
of launcher.c's struct LogicalRepWorkerId, which led me to notice that
that struct wasn't used at all anymore, so I just took it out.
6568cef, that introduced the option, had an inconsistent behavior when
it comes to configuration tables set up by pg_extension_config_dump, as
the data of all configuration tables would included in a dump even for
extensions not listed by a set of --extension switches.
The contents dumped changed depending on the schema where an extension
was installed when an extension was not listed. For example, an
extension installed under the public schema would have its configuration
data not dumped even when not listed with --extension, which was
inconsistent with the case of an extension installed on a non-public
schema, where the configuration would be dumped.
Per discussion with Noah, we have settled down to the simple rule of
dumping configuration data of an extension if it is listed in
--extension (default is unchanged and backward-compatible, to dump
everything on sight if there are no extensions directly listed). This
avoids some weird cases where the dumps depended on a --schema for one.
More tests are added to cover the gap, where we cross-check more
behaviors depending on --schema when an extension is not listed.
Reported-by: Noah Misch
Reviewed-by: Noah Misch
Discussion: https://postgr.es/m/20210404220802.GA728316@rfd.leadboat.com
A (relatively minor) annoyance of ErrorResponse/NoticeResponse messages
as printed by PQtrace() is that their length might vary when we move
error messages from one source file to another, one function to another,
or even when their location line numbers change number of digits.
To avoid having to adjust expected files for some tests, make the
regress mode of PQtrace() suppress the length word of NoticeResponse and
ErrorResponse messages.
Discussion: https://postgr.es/m/20210402023010.GA13563@alvherre.pgsql
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
DEBUG was already defined by the MSVC toolchain for "Debug" builds. On
these systems the unconditional #define DEBUG was causing a 'DEBUG': macro
redefinition warning.
Here we rename DEBUG to DEBUG_OUPUT and also get rid of the #define which
defined this constant. This appears to have been left in the code by
mistake.
Discussion: https://postgr.es/m/CAApHDvqTTgDm38s4HRj03nhzhzQ1oMOj-RXFUB1pE6Bj07jyuQ@mail.gmail.com
Not much to say here: does what it says on the tin.
We steal a previously-always-zero bit from the nextOffset
field of leaf index tuples in order to track whether there
is a nulls bitmap. Otherwise it works about like included
columns in other index types.
Pavel Borisov, reviewed by Andrey Borodin and Anastasia Lubennikova,
and rather heavily editorialized on by me
Discussion: https://postgr.es/m/CALT9ZEFi-vMp4faht9f9Junb1nO3NOSjhpxTmbm1UGLMsLqiEQ@mail.gmail.com
According to the documentation, the attType passed to the opclass
config function (and also relied on by the core code) is the type
of the heap column or expression being indexed. But what was
actually being passed was the type stored for the index column.
This made no difference for user-defined SP-GiST opclasses,
because we weren't allowing the STORAGE clause of CREATE OPCLASS
to be used, so the two types would be the same. But it's silly
not to allow that, seeing that the built-in poly_ops opclass
has a different value for opckeytype than opcintype, and that if you
want to do lossy storage then the types must really be different.
(Thus, user-defined opclasses doing lossy storage had to lie about
what type is in the index.) Hence, remove the restriction, and make
sure that we use the input column type not opckeytype where relevant.
For reasons of backwards compatibility with existing user-defined
opclasses, we can't quite insist that the specified leafType match
the STORAGE clause; instead just add an amvalidate() warning if
they don't match.
Also fix some bugs that would only manifest when trying to return
index entries when attType is different from attLeafType. It's not
too surprising that these have not been reported, because the only
usual reason for such a difference is to store the leaf value
lossily, rendering index-only scans impossible.
Add a src/test/modules module to exercise cases where attType is
different from attLeafType and yet index-only scan is supported.
Discussion: https://postgr.es/m/3728741.1617381471@sss.pgh.pa.us
Windows doesn't like setvbuf(..., _IOLBF) and crashes if you use it,
which has been causing the libpq_pipeline failures all along ... and our
own port.h has known about it for a long time: it offers PG_IOLBF that's
defined to _IONBF on that platform. Follow its advice.
While at it, get rid of a bogus bitshift that used a constant of the
wrong size. Decorate the constant as LL to fix. While at it, remove a
pointless addition that only confused matters.
All as diagnosed by Tom Lane.
Discussion: https://postgr.es/m/3458958.1617302154@sss.pgh.pa.us
I forgot to strdup() when processing argv[]. Apparently many platforms
hide this mistake from users, but in those that don't you may get a
program crash. Repair.
Per buildfarm member drongo, which is the only one in all the buildfarm
manifesting a problem here.
While at it, move "numrows" processing out of the line of special cases,
and make it getopt's -r instead. (A similar thing could be done to
'conninfo', but current use of the program doesn't warrant spending time
on that -- nowhere else we use conninfo in so simplistic a manner.)
Discussion: https://postgr.es/m/20210401124850.GA19247@alvherre.pgsql
It's misplaced there -- it's not libpq's output stream to tweak in that
way. In particular, POSIX says that it has to be called before any
other operation on the file, so if a stream previously used by the
calling application, bad things may happen.
Put setvbuf() in libpq_pipeline for good measure.
Also, reduce fopen(..., "w+") to just fopen(..., "w") in
libpq_pipeline.c. It's not clear that this fixes anything, but we don't
use w+ anywhere.
Per complaints from Tom Lane.
Discussion: https://postgr.es/m/3337422.1617229905@sss.pgh.pa.us
Some buildfarm animals with force_parallel_mode=regress were failing
this test because the error is reported in a parallel worker quicker
than the rows that succeed.
Take the opportunity to move the SET of lc_messages out of the traced
section, because it's not very interesting.
Diagnosed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/3304521.1617221724@sss.pgh.pa.us
Some compilers seem to be concerned about the possibility that
recv_step is not any of the defined enum values. Silence
warnings about uninitialized cmdtag in a different way than
I did in 9fb9691a8.
Test pipeline_abort was not checking that it got the rows it expected in
one mode; make it do so. This doesn't fix the actual problem (no idea
what that is, yet) but at least it should make it more obvious rather
than being visible only as a difference in the trace output.
While at it, fix other infelicities in the test:
* I reversed the order of result vs. expected in like().
* The output traces from -t are being put in the log dir, which means
the buildfarm script uselessly captures them. Put them in a separate
dir tmp_check/traces instead, to avoid cluttering the buildfarm results.
* Test pipelined_insert was using too large a row count. Reduce that a
tad and add a filler column to make each insert a little bulkier, while
still keeping enough that a buffer is filled and we have to switch mode.
When specified, only extensions matching the given pattern are included
in dumps. Similarly to --table and --schema, when --strict-names is
used, a perfect match is required. Also, like the two other options,
this new option offers no guarantee that dependent objects have been
dumped, so a restore may fail on a clean database.
Tests are added in test_pg_dump/, checking after a set of positive and
negative cases, with or without an extension's contents added to the
dump generated.
Author: Guillaume Lelarge
Reviewed-by: David Fetter, Tom Lane, Michael Paquier, Asif Rehman,
Julien Rouhaud
Discussion: https://postgr.es/m/CAECtzeXOt4cnMU5+XMZzxBPJ_wu76pNy6HZKPRBL-j7yj1E4+g@mail.gmail.com
Allow a partition be detached from its partitioned table without
blocking concurrent queries, by running in two transactions and only
requiring ShareUpdateExclusive in the partitioned table.
Because it runs in two transactions, it cannot be used in a transaction
block. This is the main reason to use dedicated syntax: so that users
can choose to use the original mode if they need it. But also, it
doesn't work when a default partition exists (because an exclusive lock
would still need to be obtained on it, in order to change its partition
constraint.)
In case the second transaction is cancelled or a crash occurs, there's
ALTER TABLE .. DETACH PARTITION .. FINALIZE, which executes the final
steps.
The main trick to make this work is the addition of column
pg_inherits.inhdetachpending, initially false; can only be set true in
the first part of this command. Once that is committed, concurrent
transactions that use a PartitionDirectory will include or ignore
partitions so marked: in optimizer they are ignored if the row is marked
committed for the snapshot; in executor they are always included. As a
result, and because of the way PartitionDirectory caches partition
descriptors, queries that were planned before the detach will see the
rows in the detached partition and queries that are planned after the
detach, won't.
A CHECK constraint is created that duplicates the partition constraint.
This is probably not strictly necessary, and some users will prefer to
remove it afterwards, but if the partition is re-attached to a
partitioned table, the constraint needn't be rechecked.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20200803234854.GA24158@alvherre.pgsql
Compilers that don't understand that elog(ERROR) doesn't return
issued warnings here. In the cases in libpq_pipeline.c, we were
not exactly helping things by failing to mark pg_fatal() as noreturn.
Per buildfarm.
I forgot that Windows represents newlines as \r\n, so splitting a string
at /\s/ creates additional empty strings. Let's rewrite that as /\s+/
to see if that avoids those. (There's precedent for using that pattern
on Windows in other scripts.)
Previously: 91bdf499b3, 8ed428dc97, 650b967076.
Per buildfarm, via Tom Lane.
Discussion: https://postgr.es/m/3144460.1615860259@sss.pgh.pa.us
Pipeline mode in libpq lets an application avoid the Sync messages in
the FE/BE protocol that are implicit in the old libpq API after each
query. The application can then insert Sync at its leisure with a new
libpq function PQpipelineSync. This can lead to substantial reductions
in query latency.
Co-authored-by: Craig Ringer <craig.ringer@enterprisedb.com>
Co-authored-by: Matthieu Garrigues <matthieu.garrigues@gmail.com>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Aya Iwata <iwata.aya@jp.fujitsu.com>
Reviewed-by: Daniel Vérité <daniel@manitou-mail.org>
Reviewed-by: David G. Johnston <david.g.johnston@gmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Kirk Jamison <k.jamison@fujitsu.com>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: Nikhil Sontakke <nikhils@2ndquadrant.com>
Reviewed-by: Vaishnavi Prabakaran <VaishnaviP@fast.au.fujitsu.com>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Discussion: https://postgr.es/m/CAMsr+YFUjJytRyV4J-16bEoiZyH=4nj+sQ7JP9ajwz=B4dMMZw@mail.gmail.com
Discussion: https://postgr.es/m/CAJkzx4T5E-2cQe3dtv2R78dYFvz+in8PY7A8MArvLhs_pg75gg@mail.gmail.com
POSIX defines the behavior of back-references thus:
The back-reference expression '\n' shall match the same (possibly
empty) string of characters as was matched by a subexpression
enclosed between "\(" and "\)" preceding the '\n'.
As far as I can see, the back-reference is supposed to consider only
the data characters matched by the referenced subexpression. However,
because our engine copies the NFA constructed from the referenced
subexpression, it effectively enforces any constraints therein, too.
As an example, '(^.)\1' ought to match 'xx', or any other string
starting with two occurrences of the same character; but in our code
it does not, and indeed can't match anything, because the '^' anchor
constraint is included in the backref's copied NFA. If POSIX intended
that, you'd think they'd mention it. Perl for one doesn't act that
way, so it's hard to conclude that this isn't a bug.
Fix by modifying the backref's NFA immediately after it's copied from
the reference, replacing all constraint arcs by EMPTY arcs so that the
constraints are treated as automatically satisfied. This still allows
us to enforce matching rules that depend only on the data characters;
for example, in '(^\d+).*\1' the NFA matching step will still know
that the backref can only match strings of digits.
Perhaps surprisingly, this change does not affect the results of any
of a rather large corpus of real-world regexes. Nonetheless, I would
not consider back-patching it, since it's a clear compatibility break.
Patch by me, reviewed by Joel Jacobson
Discussion: https://postgr.es/m/661609.1614560029@sss.pgh.pa.us
Newline is certainly not a digit, nor a word character, so it is
sensible that it should match these complemented character classes.
Previously, \D and \W acted that way by default, but in
newline-sensitive mode ('n' or 'p' flag) they did not match newlines.
This behavior was previously forced because explicit complemented
character classes don't match newlines in newline-sensitive mode;
but as of the previous commit that implementation constraint no
longer exists. It seems useful to change this because the primary
real-world use for newline-sensitive mode seems to be to match the
default behavior of other regex engines such as Perl and Javascript
... and their default behavior is that these match newlines.
The old behavior can be kept by writing an explicit complemented
character class, i.e. [^[:digit:]] or [^[:word:]]. (This means
that \D and \W are not exactly equivalent to those strings, but
they weren't anyway.)
Discussion: https://postgr.es/m/3220564.1613859619@sss.pgh.pa.us
The complement-class escapes \D, \S, \W are now allowed within
bracket expressions. There is no semantic difficulty with doing
that, but the rather hokey macro-expansion-based implementation
previously used here couldn't cope.
Also, invent "word" as an allowed character class name, thus "\w"
is now equivalent to "[[:word:]]" outside brackets, or "[:word:]"
within brackets. POSIX allows such implementation-specific
extensions, and the same name is used in e.g. bash.
One surprising compatibility issue this raises is that constructs
such as "[\w-_]" are now disallowed, as our documentation has always
said they should be: character classes can't be endpoints of a range.
Previously, because \w was just a macro for "[:alnum:]_", such a
construct was read as "[[:alnum:]_-_]", so it was accepted so long as
the character after "-" was numerically greater than or equal to "_".
Some implementation cleanup along the way:
* Remove the lexnest() hack, and in consequence clean up wordchrs()
to not interact with the lexer.
* Fix colorcomplement() to not be O(N^2) in the number of colors
involved.
* Get rid of useless-as-far-as-I-can-see calls of element()
on single-character character element names in brackpart().
element() always maps these to the character itself, and things
would be quite broken if it didn't --- should "[a]" match something
different than "a" does? Besides, the shortcut path in brackpart()
wasn't doing this anyway, making it even more inconsistent.
Discussion: https://postgr.es/m/2845172.1613674385@sss.pgh.pa.us
Discussion: https://postgr.es/m/3220564.1613859619@sss.pgh.pa.us
While poking at the regex code, I happened to notice that the bug
squashed in commit afcc8772e had a sibling: next() failed to return
a specific value associated with the '}' token for a "\{m,n\}"
quantifier when parsing in basic RE mode. Again, this could result
in treating the quantifier as non-greedy, which it never should be in
basic mode. For that to happen, the last character before "\}" that
sets "nextvalue" would have to set it to zero, or it'd have to have
accidentally been zero from the start. The failure can be provoked
repeatably with, for example, a bound ending in digit "0".
Like the previous patch, back-patch all the way.
Push some hopefully-uncontroversial bits extracted from an upcoming
patch series, to remove non-relevant clutter from the main patches.
In compact(), return immediately after setting REG_ASSERT error;
continuing the loop would just lead to assertion failure below.
(Ask me how I know.)
In parseqatom(), remove assertion that moresubs() did its job.
When moresubs actually did its job, this is redundant with that
function's final assert; but when it failed on OOM, this is an
assertion crash. We could avoid the crash by adding a NOERR()
check before the assertion, but it seems better to subtract code
than add it. (Note that there's a NOERR exit a few lines further
down, and nothing else between here and there requires moresubs
to have succeeded. So we don't really need an extra error exit.)
This is a live bug in assert-enabled builds, but given the very
low likelihood of OOM in moresub's tiny allocation, I don't think
it's worth back-patching.
On the other hand, it seems worthwhile to add an assertion that
our intended v->subs[subno] target is still null by the time we
are ready to insert into it, since there's a recursion in between.
In pg_regexec, ensure we fflush any debug output on the way out,
and try to make MDEBUG messages more uniform and helpful. (In
particular, ensure that all of them are prefixed with the subre's
id number, so one can match up entry and exit reports.)
Add some test cases in test_regex to improve coverage of lookahead
and lookbehind constraints. Adding these now is mainly to establish
that this is indeed the existing behavior.
Discussion: https://postgr.es/m/1340281.1613018383@sss.pgh.pa.us
This is a replacement for the existing --with-openssl, extending the
logic to make easier the addition of new SSL libraries. The grammar is
chosen to be similar to --with-uuid, where multiple values can be
chosen, with "openssl" as the only supported value for now.
The original switch, --with-openssl, is kept for compatibility.
Author: Daniel Gustafsson, Michael Paquier
Reviewed-by: Jacob Champion
Discussion: https://postgr.es/m/FAB21FC8-0F62-434F-AA78-6BD9336D630A@yesql.se
For those system catalogs that have a unique indexes, make a primary
key and unique constraint, using ALTER TABLE ... PRIMARY KEY/UNIQUE
USING INDEX.
This can be helpful for GUI tools that look for a primary key, and it
might in the future allow declaring foreign keys, for making schema
diagrams.
The constraint creation statements are automatically created by
genbki.pl from DECLARE_UNIQUE_INDEX directives. To specify which one
of the available unique indexes is the primary key, use the new
directive DECLARE_UNIQUE_INDEX_PKEY instead. By convention, we
usually make a catalog's OID column its primary key, if it has one.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/dc5f44d9-5ec1-a596-0251-dadadcdede98@2ndquadrant.com
The stanza to report a "partial" match could overrun the initially
allocated output array, so it needs its own copy of the array-resizing
logic that's in the main loop. I overlooked the need for this in
ca8217c10.
Per report from Alexander Lakhin.
Discussion: https://postgr.es/m/3206aace-50db-e02a-bbea-76d5cdaa2cb6@gmail.com
The context is an object that no longer bears some aclitem that it bore
initially. (A user issued REVOKE or GRANT statements upon the object.)
pg_dump is forming SQL to reproduce the object ACL. Since initdb
creates no ACL bearing GRANT OPTION, reaching this bug requires an
extension where the creation script establishes such an ACL. No PGXN
extension does that. If an installation did reach the bug, pg_dump
would have omitted a semicolon, causing a REVOKE and the next SQL
statement to fail. Separately, since the affected code exists to
eliminate an entire aclitem, it wants plain REVOKE, not REVOKE GRANT
OPTION FOR. Back-patch to 9.6, where commit
23f34fa4ba first appeared.
Discussion: https://postgr.es/m/20210109102423.GA160022@rfd.leadboat.com
Add an executor aminsert() hint mechanism that informs index AMs that
the incoming index tuple (the tuple that accompanies the hint) is not
being inserted by execution of an SQL statement that logically modifies
any of the index's key columns.
The hint is received by indexes when an UPDATE takes place that does not
apply an optimization like heapam's HOT (though only for indexes where
all key columns are logically unchanged). Any index tuple that receives
the hint on insert is expected to be a duplicate of at least one
existing older version that is needed for the same logical row. Related
versions will typically be stored on the same index page, at least
within index AMs that apply the hint.
Recognizing the difference between MVCC version churn duplicates and
true logical row duplicates at the index AM level can help with cleanup
of garbage index tuples. Cleanup can intelligently target tuples that
are likely to be garbage, without wasting too many cycles on less
promising tuples/pages (index pages with little or no version churn).
This is infrastructure for an upcoming commit that will teach nbtree to
perform bottom-up index deletion. No index AM actually applies the hint
just yet.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Victor Yegorov <vyegorov@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wz=CEKFa74EScx_hFVshCOn6AA5T-ajFASTdzipdkLTNQQ@mail.gmail.com
brenext(), when parsing a '*' quantifier, forgot to return any "value"
for the token; per the equivalent case in next(), it should return
value 1 to indicate that greedy rather than non-greedy behavior is
wanted. The result is that the compiled regexp could behave like 'x*?'
rather than the intended 'x*', if we were unlucky enough to have
a zero in v->nextvalue at this point. That seems to happen with some
reliability if we have '.*' at the beginning of a BRE-mode regexp,
although that depends on the initial contents of a stack-allocated
struct, so it's not guaranteed to fail.
Found by Alexander Lakhin using valgrind testing. This bug seems
to be aboriginal in Spencer's code, so back-patch all the way.
Discussion: https://postgr.es/m/16814-6c5e3edd2bdf0d50@postgresql.org
This module provides a function test_regex() that is functionally
rather like regexp_matches(), but with additional debugging-oriented
options and additional output. The debug options are somewhat obscure;
they are chosen to match the API of the test harness that Henry Spencer
wrote way-back-when for use in Tcl. With this, we can import all the
test cases that Spencer wrote originally, even for regex functionality
that we don't currently expose in Postgres. This seems necessary
because we can no longer rely on Tcl to act as upstream and verify
any fixes or improvements that we make.
In addition to Spencer's tests, I added a few for lookbehind
constraints (which we added in 2015, and Tcl still hasn't absorbed)
that are modeled on his tests for lookahead constraints. After looking
at code coverage reports, I also threw in a couple of tests to more
fully exercise our "high colormap" logic.
According to my testing, this brings the check-world coverage
for src/backend/regex/ from 71.1% to 86.7% of lines.
(coverage.postgresql.org shows a slightly different number,
which I think is because it measures a non-assert build.)
Discussion: https://postgr.es/m/2873268.1609732164@sss.pgh.pa.us
Any subdirectory that's ignoring /output_iso/ should also
ignore /tmp_check_iso/, which could be left behind by a
failed pg_isolation_regress_check run.
I think these have been wrong for awhile, but it doesn't
seem important to fix in back branches.
Previously test_shm_mq worker used the stripped-down version of die()
as the SIGTERM signal handler. This commit makes it use die(), instead,
to simplify the code.
In terms of the code, the difference between die() and the stripped-down
version previously used is whether the signal handler directly may call
ProcessInterrupts() or not. But this difference doesn't exist in
a background worker because, in bgworker, DoingCommandRead flag will
never be true and die() will never call ProcessInterrupts() directly.
Therefore test_shm_mq worker can safely use die(), like other bgworker
proceses (e.g., logical replication apply launcher or autoprewarm worker)
currently do.
Thanks to Craig Ringer for the report and investigation of the issue.
Author: Bharath Rupireddy
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CAGRY4nxsAe_1k_9g5b47orA0S011iBoHsXHFMH7cg7HV0O1bwQ@mail.gmail.com
Previously worker_spi used its custom signal handlers for SIGHUP and
SIGTERM. This commit makes worker_spi use the standard signal handlers,
to simplify the code.
Note that die() is used as the standard SIGTERM signal handler in
worker_spi instead of SignalHandlerForShutdownRequest() or bgworker_die().
Previously the exit handling was only able to exit from within the main loop,
and not from within the backend code it calls. This is why die() needs to
be used here, so worker_spi can respond to SIGTERM signal while it's
executing a query.
Maybe we can say that it's a bug that worker_spi could not respond to
SIGTERM during query execution. But since worker_spi is a just example
of the background worker code, we don't do the back-patch.
Thanks to Craig Ringer for the report and investigation of the issue.
Author: Bharath Rupireddy
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CALj2ACXDEZhAFOTDcqO9cFSRvrFLyYOnPKrcA1UG4uZn9hUAVg@mail.gmail.com
Discussion: https://postgr.es/m/CAGRY4nxsAe_1k_9g5b47orA0S011iBoHsXHFMH7cg7HV0O1bwQ@mail.gmail.com
The SQL spec calls out nonstandard syntax for certain function calls,
for example substring() with numeric position info is supposed to be
spelled "SUBSTRING(string FROM start FOR count)". We accept many
of these things, but up to now would not print them in the same format,
instead simplifying down to "substring"(string, start, count).
That's long annoyed me because it creates an interoperability
problem: we're gratuitously injecting Postgres-specific syntax into
what might otherwise be a perfectly spec-compliant view definition.
However, the real reason for addressing it right now is to support
a planned change in the semantics of EXTRACT() a/k/a date_part().
When we switch that to returning numeric, we'll have the parser
translate EXTRACT() to some new function name (might as well be
"extract" if you ask me) and then teach ruleutils.c to reverse-list
that per SQL spec. In this way existing calls to date_part() will
continue to have the old semantics.
To implement this, invent a new CoercionForm value COERCE_SQL_SYNTAX,
and make the parser insert that rather than COERCE_EXPLICIT_CALL when
the input has SQL-spec decoration. (But if the input has the form of
a plain function call, continue to mark it COERCE_EXPLICIT_CALL, even
if it's calling one of these functions.) Then ruleutils.c recognizes
COERCE_SQL_SYNTAX as a cue to emit SQL call syntax. It can know
which decoration to emit using hard-wired knowledge about the
functions that could be called this way. (While this solution isn't
extensible without manual additions, neither is the grammar, so this
doesn't seem unmaintainable.) Notice that this solution will
reverse-list a function call with SQL decoration only if it was
entered that way; so dump-and-reload will not by itself produce any
changes in the appearance of views.
This requires adding a CoercionForm field to struct FuncCall.
(I couldn't resist the temptation to rearrange that struct's
field order a tad while I was at it.) FuncCall doesn't appear
in stored rules, so that change isn't a reason for a catversion
bump, but I did one anyway because the new enum value for
CoercionForm fields could confuse old backend code.
Possible future work:
* Perhaps CoercionForm should now be renamed to DisplayForm,
or something like that, to reflect its more general meaning.
This'd require touching a couple hundred places, so it's not
clear it's worth the code churn.
* The SQLValueFunction node type, which was invented partly for
the same goal of improving SQL-compatibility of view output,
could perhaps be replaced with regular function calls marked
with COERCE_SQL_SYNTAX. It's unclear if this would be a net
code savings, however.
Discussion: https://postgr.es/m/42b73d2d-da12-ba9f-570a-420e0cce19d9@phystech.edu
Commit 3eb3d3e78 was a few bricks shy of a load: while it correctly
set the table's "interesting" flag when deciding to dump the data of
an extension config table, it was not correct to clear that flag
if we concluded we shouldn't dump the data. This led to the crash
reported in bug #16655, because in fact we'll traverse dumpTableSchema
anyway for all extension tables (to see if they have user-added
seclabels or RLS policies).
The right thing to do is to force "interesting" true in makeTableDataInfo,
and otherwise leave the flag alone. (Doing it there is more future-proof
in case additional calls are added, and it also avoids setting the flag
unnecessarily if that function decides the table is non-dumpable.)
This investigation also showed that while only the --inserts code path
had an obvious failure in the case considered by 3eb3d3e78, the COPY
code path also has a problem with not having loaded table subsidiary
data. That causes fmtCopyColumnList to silently return an empty string
instead of the correct column list. That accidentally mostly works,
which perhaps is why we didn't notice this before. It would only fail
if the restore column order is different from the dump column order,
which only happens in weird inheritance cases, so it's not surprising
nobody had hit the case with an extension config table. Nonetheless,
it's a bug, and it goes a long way back, not just to v12 where the
--inserts code path started to have a problem with this.
In hopes of catching such cases a bit sooner in future, add some
Asserts that "interesting" has been set in both dumpTableData and
dumpTableSchema. Adjust the test case added by 3eb3d3e78 so that it
checks the COPY rather than INSERT form of that bug, allowing it to
detect the longer-standing symptom.
Per bug #16655 from Cameron Daniel. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/16655-5c92d6b3a9438137@postgresql.org
Discussion: https://postgr.es/m/18048b44-3414-b983-8c7c-9165b177900d@2ndQuadrant.com
It's not quite clear why commit 45b980570 has resulted in
some instability here, though interference from concurrent
autovacuum runs seems like a reasonable guess. What is
clear is that the output ordering of the test queries is
underdetermined for no very good reason. Extend the
ORDER BY keys in hopes of fixing the buildfarm.
Discussion: https://postgr.es/m/147499.1600351924@sss.pgh.pa.us
In the particular case of GRANTED BY, this is specified in the SQL
standard. Since in PostgreSQL, CURRENT_ROLE is equivalent to
CURRENT_USER, and CURRENT_USER is already supported here, adding
CURRENT_ROLE is trivial. The other cases are PostgreSQL extensions,
but for the same reason it also makes sense there.
Reviewed-by: Vik Fearing <vik@postgresfriends.org>
Reviewed-by: Asif Rehman <asifr.rehman@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/f2feac44-b4c5-f38f-3699-2851d6a76dc9%402ndquadrant.com
ALTER TABLE commands in an extension script are added to an event
trigger command list; but starting with commit b5810de3f4 they do so in
a memory context that's too short-lived, so when execution ends and time
comes to use the entries, they've already been freed.
(This would also be a problem with ALTER TABLE commands in a
multi-command query string, but these serendipitously end in
PortalContext -- which probably explains why it took so long for this to
be reported.)
Fix by using the memory context specifically set for that, instead.
Backpatch to 13, where the aforementioned commit appeared.
Reported-by: Philippe Beaudoin
Author: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Discussion: https://postgr.es/m/20200902193715.6e0269d4@firost
If this data is not collected, pg_dump segfaults if asked for column
inserts.
Fix by Fabrízio de Royes Mello
Backpatch to release 12 where the bug was introduced.
If a CREATE TABLE command uses both LIKE and traditional inheritance,
Vars in CHECK constraints and expression indexes that are absorbed
from a LIKE parent table tended to get mis-numbered, resulting in
wrong answers and/or bizarre error messages (though probably not any
actual crashes, thanks to validation occurring in the executor).
In v12 and up, the same could happen to Vars in GENERATED expressions,
even in cases with no LIKE clause but multiple traditional-inheritance
parents.
The cause of the problem for LIKE is that parse_utilcmd.c supposed
it could renumber such Vars correctly during transformCreateStmt(),
which it cannot since we have not yet accounted for columns added via
inheritance. Fix that by postponing processing of LIKE INCLUDING
CONSTRAINTS, DEFAULTS, GENERATED, INDEXES till after we've performed
DefineRelation().
The error with GENERATED and multiple inheritance is a simple oversight
in MergeAttributes(); it knows it has to renumber Vars in inherited
CHECK constraints, but forgot to apply the same processing to inherited
GENERATED expressions (a/k/a defaults).
Per bug #16272 from Tom Gottfried. The non-GENERATED variants of the
issue are ancient, presumably dating right back to the addition of
CREATE TABLE LIKE; hence back-patch to all supported branches.
Discussion: https://postgr.es/m/16272-6e32da020e9a9381@postgresql.org
PL/Sample is an example template of procedural-language handler. This
can be used as a base to implement a custom PL, or as a facility to test
APIs dedicated to PLs. Much more could be done in this module, like
adding a simple validator, but this is left as future work.
The documentation included originally some C code to understand the
basics of PL handler implementation, but it was outdated, and not really
helpful either if trying to implement a new procedural language,
particularly when it came to the integration of a PL installation with
CREATE EXTENSION.
Author: Mark Wong
Reviewed-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/20200612172648.GA3327@2ndQuadrant.com
They are equivalent, except that StrNCpy() zero-fills the entire
destination buffer instead of providing just one trailing zero. For
all but a tiny number of callers, that's just overhead rather than
being desirable.
Remove StrNCpy() as it is now unused.
In some cases, namestrcpy() is the more appropriate function to use.
While we're here, simplify the API of namestrcpy(): Remove the return
value, don't check for NULL input. Nothing was using that anyway.
Also, remove a few unused name-related functions.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/44f5e198-36f6-6cdb-7fa9-60e34784daae%402ndquadrant.com
We have various cases where we allow DDL on tables to be performed with
less than full AccessExclusiveLock. This requires concurrent queries
to be able to cope with the DDL change mid-flight, but up to now we had
no repeatable way to test such cases. To improve that, invent a test
module that allows halting a backend after planning and then resuming
execution once we've done desired actions in another session. (The same
approach could be used to inject delays in other places, if there's a
suitable hook available.)
This commit includes a single test case, which is meant to exercise the
previously-untestable ExecCreatePartitionPruneState code repaired by
commit 7a980dfc6. We'd probably not bother with this if that were the
only foreseen benefit, but I expect additional test cases will use this
infrastructure in the future.
Test module by Andy Fan, partition-addition test case by me.
Discussion: https://postgr.es/m/20200802181131.GA27754@telsasoft.com
Switching the regression tests to use tstzrange() has proved to not be a
good idea for environments where the timestamp precision is low, as
internal range checks exclude the upper bound. So, if the commit
timestamp of a transaction matched with now() from the next query,
the test would fail. This changes to use two bound checks instead of
the range function, where the upper bound is inclusive.
Per buildfarm member jacana.
Discussion: https://postgr.es/m/20200712122507.GD21680@paquier.xyz
Replication origins created by regression tests should have names
starting with "regress_", and the test introduced in b1e48bb for commit
timestamps did not do that.
Per buildfarm member longfin.
Discussion: https://postgr.es/m/20200712122507.GD21680@paquier.xyz
This includes two changes:
- Addition of a new function pg_xact_commit_timestamp_origin() able, for
a given transaction ID, to return the commit timestamp and replication
origin of this transaction. An equivalent function existed in
pglogical.
- Addition of the replication origin to pg_last_committed_xact().
The commit timestamp manager includes already APIs able to return the
replication origin of a transaction on top of its commit timestamp, but
the code paths for replication origins were never stressed as those
functions have never looked for a replication origin, and the SQL
functions available have never included this information since their
introduction in 73c986a.
While on it, refactor a test of modules/commit_ts/ to use tstzrange() to
check that a transaction timestamp is within the wanted range, making
the test a bit easier to read.
Bump catalog version.
Author: Movead Li
Reviewed-by: Madan Kumar, Michael Paquier
Discussion: https://postgr.es/m/2020051116430836450630@highgo.ca
The recipe was previously given in comments in the module's test
script, but now we have an explicit recipe in the Makefile. The now
redundant comments in the script are removed.
This recipe shouldn't be needed in normal use, as the certificate and
key are in git and don't need to be regenerated.
Discussion: https://postgr.es/m/ae8f21fc-95cb-c98a-f241-1936133f466f@2ndQuadrant.com
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
Commit f2fcad27d5 (9.6 era) added the ability to mark objects as
dependent an extension, but forgot to add a way for such dependencies to
be removed. This commit fixes that oversight.
Strictly speaking this should be backpatched to 9.6, but due to lack of
demand we're not doing so at this time.
Discussion: https://postgr.es/m/20200217225333.GA30974@alvherre.pgsql
Reviewed-by: ahsan hadi <ahsan.hadi@gmail.com>
Reviewed-by: Ibrar Ahmed <ibrar.ahmad@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
recordExtObjInitPriv and removeExtObjInitPriv were sloppy about
calling ReleaseSysCache. The cases cannot occur given current usage
in ALTER EXTENSION ADD/DROP, since we wouldn't get here for these
relkinds; but it seems wise to clean up better.
In passing, extend test logic in test_pg_dump to exercise the
dropped-column code paths here.
Since the case is unreachable at present, there seems no great
need to back-patch; hence fix HEAD only.
Kyotaro Horiguchi, with test case and comment adjustments by me
Discussion: https://postgr.es/m/20200417.151831.1153577605111650154.horikyota.ntt@gmail.com
The txid_XXX family of fmgr functions exposes 64 bit transaction IDs to
users as int8. Now that we have an SQL type xid8 for FullTransactionId,
define a new set of functions including pg_current_xact_id() and
pg_current_snapshot() based on that. Keep the old functions around too,
for now.
It's a bit sneaky to use the same C functions for both, but since the
binary representation is identical except for the signedness of the
type, and since older functions are the ones using the wrong signedness,
and since we'll presumably drop the older ones after a reasonable period
of time, it seems reasonable to switch to FullTransactionId internally
and share the code for both.
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Takao Fujii <btfujiitkp@oss.nttdata.com>
Reviewed-by: Yoshikazu Imai <imai.yoshikazu@fujitsu.com>
Reviewed-by: Mark Dilger <mark.dilger@enterprisedb.com>
Discussion: https://postgr.es/m/20190725000636.666m5mad25wfbrri%40alap3.anarazel.de
The Makefile should set TAP_TESTS = 1, not implement the infrastructure
for itself. For one thing, it missed the appropriate "make clean"
steps. For another, the buildfarm isn't running this test because
it wasn't hooked into "make installcheck" either.
Commit 896fcdb230 contained an unnecessary setting that listened to
localhost. Since the test doesn't actually try to make an SSL connection
to the database this isn't required. Moreover, it's a security hole.
Per gripe from Tom Lane.
Some platforms require libssl to be linked explicitly in the new
SSL test module. Borrow contrib/sslinfo's code for that.
Since src/test/modules/Makefile now has a variable SUBDIRS list,
it needs to follow the ALWAYS_SUBDIRS protocol for that (cf.
comments in Makefile.global.in).
Blindly try to fix MSVC build failures by adding PGDLLIMPORT.
The default hook function sets the default password callback function.
In order to allow preloaded libraries to have an opportunity to override
the default, TLS initialization if now delayed slightly until after
shared preloaded libraries have been loaded.
A test module is provided which contains a trivial example that decodes
an obfuscated password for an SSL certificate.
Author: Andrew Dunstan
Reviewed By: Andreas Karlsson, Asaba Takanori
Discussion: https://postgr.es/m/04116472-818b-5859-1d74-3d995aab2252@2ndQuadrant.com
pg_dump is oblivious to this kind of dependency, so they're lost on
dump/restores (and pg_upgrade). Have pg_dump emit ALTER lines so that
they're preserved. Add some pg_dump tests for the whole thing, also.
Reviewed-by: Tom Lane (offlist)
Reviewed-by: Ibrar Ahmed
Reviewed-by: Ahsan Hadi (who also reviewed commit 899a04f5ed)
Discussion: https://postgr.es/m/20200217225333.GA30974@alvherre.pgsql
If the command is attempted for an extension that the object already
depends on, silently do nothing.
In particular, this means that if a database containing multiple such
entries is dumped, the restore will silently do the right thing and
record just the first one. (At least, in a world where pg_dump does
dump such entries -- which it doesn't currently, but it will.)
Backpatch to 9.6, where this kind of dependency was introduced.
Reviewed-by: Ibrar Ahmed, Tom Lane (offlist)
Discussion: https://postgr.es/m/20200217225333.GA30974@alvherre.pgsql
Our usual practice for "poor man's enum" catalog columns is to define
macros for the possible values and use those, not literal constants,
in C code. But for some reason lost in the mists of time, this was
never done for typalign/attalign or typstorage/attstorage. It's never
too late to make it better though, so let's do that.
The reason I got interested in this right now is the need to duplicate
some uses of the TYPSTORAGE constants in an upcoming ALTER TYPE patch.
But in general, this sort of change aids greppability and readability,
so it's a good idea even without any specific motivation.
I may have missed a few places that could be converted, and it's even
more likely that pending patches will re-introduce some hard-coded
references. But that's not fatal --- there's no expectation that
we'd actually change any of these values. We can clean up stragglers
over time.
Discussion: https://postgr.es/m/16457.1583189537@sss.pgh.pa.us
The backend was using strings to represent command tags and doing string
comparisons in multiple places, but that's slow and unhelpful. Create a
new command list with a supporting structure to use instead; this is
stored in a tag-list-file that can be tailored to specific purposes with
a caller-definable C macro, similar to what we do for WAL resource
managers. The first first such uses are a new CommandTag enum and a
CommandTagBehavior struct.
Replace numerous occurrences of char *completionTag with a
QueryCompletion struct so that the code no longer stores information
about completed queries in a cstring. Only at the last moment, in
EndCommand(), does this get converted to a string.
EventTriggerCacheItem no longer holds an array of palloc’d tag strings
in sorted order, but rather just a Bitmapset over the CommandTags.
Author: Mark Dilger, with unsolicited help from Álvaro Herrera
Reviewed-by: John Naylor, Tom Lane
Discussion: https://postgr.es/m/981A9DB4-3F0C-4DA5-88AD-CB9CFF4D6CAD@enterprisedb.com
Andres Freund pointed out that allowing non-superusers to run
"CREATE EXTENSION ... FROM unpackaged" has security risks, since
the unpackaged-to-1.0 scripts don't try to verify that the existing
objects they're modifying are what they expect. Just attaching such
objects to an extension doesn't seem too dangerous, but some of them
do more than that.
We could have resolved this, perhaps, by still requiring superuser
privilege to use the FROM option. However, it's fair to ask just what
we're accomplishing by continuing to lug the unpackaged-to-1.0 scripts
forward. None of them have received any real testing since 9.1 days,
so they may not even work anymore (even assuming that one could still
load the previous "loose" object definitions into a v13 database).
And an installation that's trying to go from pre-9.1 to v13 or later
in one jump is going to have worse compatibility problems than whether
there's a trivial way to convert their contrib modules into extension
style.
Hence, let's just drop both those scripts and the core-code support
for "CREATE EXTENSION ... FROM".
Discussion: https://postgr.es/m/20200213233015.r6rnubcvl4egdh5r@alap3.anarazel.de
We've had numerous bug reports about how (1) IF NOT EXISTS clauses in
ALTER TABLE don't behave as-expected, and (2) combining certain actions
into one ALTER TABLE doesn't work, though executing the same actions as
separate statements does. This patch cleans up all of the cases so far
reported from the field, though there are still some oddities associated
with identity columns.
The core problem behind all of these bugs is that we do parse analysis
of ALTER TABLE subcommands too soon, before starting execution of the
statement. The root of the bugs in group (1) is that parse analysis
schedules derived commands (such as a CREATE SEQUENCE for a serial
column) before it's known whether the IF NOT EXISTS clause should cause
a subcommand to be skipped. The root of the bugs in group (2) is that
earlier subcommands may change the catalog state that later subcommands
need to be parsed against.
Hence, postpone parse analysis of ALTER TABLE's subcommands, and do
that one subcommand at a time, during "phase 2" of ALTER TABLE which
is the phase that does catalog rewrites. Thus the catalog effects
of earlier subcommands are already visible when we analyze later ones.
(The sole exception is that we do parse analysis for ALTER COLUMN TYPE
subcommands during phase 1, so that their USING expressions can be
parsed against the table's original state, which is what we need.
Arguably, these bugs stem from falsely concluding that because ALTER
COLUMN TYPE must do early parse analysis, every other command subtype
can too.)
This means that ALTER TABLE itself must deal with execution of any
non-ALTER-TABLE derived statements that are generated by parse analysis.
Add a suitable entry point to utility.c to accept those recursive
calls, and create a struct to pass through the information needed by
the recursive call, rather than making the argument lists of
AlterTable() and friends even longer.
Getting this to work correctly required a little bit of fiddling
with the subcommand pass structure, in particular breaking up
AT_PASS_ADD_CONSTR into multiple passes. But otherwise it's mostly
a pretty straightforward application of the above ideas.
Fixing the residual issues for identity columns requires refactoring of
where the dependency link from an identity column to its sequence gets
set up. So that seems like suitable material for a separate patch,
especially since this one is pretty big already.
Discussion: https://postgr.es/m/10365.1558909428@sss.pgh.pa.us
Introduce new fields amusemaintenanceworkmem and amparallelvacuumoptions
in IndexAmRoutine for parallel vacuum. The amusemaintenanceworkmem tells
whether a particular IndexAM uses maintenance_work_mem or not. This will
help in controlling the memory used by individual workers as otherwise,
each worker can consume memory equal to maintenance_work_mem. The
amparallelvacuumoptions tell whether a particular IndexAM participates in
a parallel vacuum and if so in which phase (bulkdelete, vacuumcleanup) of
vacuum.
Author: Masahiko Sawada and Amit Kapila
Reviewed-by: Dilip Kumar, Amit Kapila, Tomas Vondra and Robert Haas
Discussion:
https://postgr.es/m/CAD21AoDTPMgzSkV4E3SFo1CH_x50bf5PqZFQf4jmqjk-C03BWg@mail.gmail.comhttps://postgr.es/m/CAA4eK1LmcD5aPogzwim5Nn58Ki+74a6Edghx4Wd8hAskvHaq5A@mail.gmail.com
When I added the ParseNamespaceItem data structure (in commit 5ebaaa494),
it wasn't very tightly integrated into the parser's APIs. In the wake of
adding p_rtindex to that struct (commit b541e9acc), there is a good reason
to make more use of it: by passing around ParseNamespaceItem pointers
instead of bare RTE pointers, we can get rid of various messy methods for
passing back or deducing the rangetable index of an RTE during parsing.
Hence, refactor the addRangeTableEntryXXX functions to build and return
a ParseNamespaceItem struct, not just the RTE proper; and replace
addRTEtoQuery with addNSItemToQuery, which is passed a ParseNamespaceItem
rather than building one internally.
Also, add per-column data (a ParseNamespaceColumn array) to each
ParseNamespaceItem. These arrays are built during addRangeTableEntryXXX,
where we have column type data at hand so that it's nearly free to fill
the data structure. Later, when we need to build Vars referencing RTEs,
we can use the ParseNamespaceColumn info to avoid the rather expensive
operations done in get_rte_attribute_type() or expandRTE().
get_rte_attribute_type() is indeed dead code now, so I've removed it.
This makes for a useful improvement in parse analysis speed, around 20%
in one moderately-complex test query.
The ParseNamespaceColumn structs also include Var identity information
(varno/varattno). That info isn't actually being used in this patch,
except that p_varno == 0 is a handy test for a dropped column.
A follow-on patch will make more use of it.
Discussion: https://postgr.es/m/2461.1577764221@sss.pgh.pa.us
This follows multiple complains from Peter Geoghegan, Andres Freund and
Alvaro Herrera that this issue ought to be dug more before actually
happening, if it happens.
Discussion: https://postgr.es/m/20191226144606.GA5659@alvherre.pgsql
The following renaming is done so as source files related to index
access methods are more consistent with table access methods (the
original names used for index AMs ware too generic, and could be
confused as including features related to table AMs):
- amapi.h -> indexam.h.
- amapi.c -> indexamapi.c. Here we have an equivalent with
backend/access/table/tableamapi.c.
- amvalidate.c -> indexamvalidate.c.
- amvalidate.h -> indexamvalidate.h.
- genam.c -> indexgenam.c.
- genam.h -> indexgenam.h.
This has been discussed during the development of v12 when table AM was
worked on, but the renaming never happened.
Author: Michael Paquier
Reviewed-by: Fabien Coelho, Julien Rouhaud
Discussion: https://postgr.es/m/20191223053434.GF34339@paquier.xyz
Add a regression test file that exercises the kinds of commands that
allow_system_table_mods allows.
This is put in the "unsafe_tests" suite, so it won't accidentally
create a mess if someone runs the normal regression tests against an
instance that they care about.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/8b00ea5e-28a7-88ba-e848-21528b632354%402ndquadrant.com
When maintaining or merging patches, one of the most common sources
for conflicts are the list of objects in makefiles. Especially when
the split across lines has been changed on both sides, which is
somewhat common due to attempting to stay below 80 columns, those
conflicts are unnecessarily laborious to resolve.
By splitting, and alphabetically sorting, OBJS style lines into one
object per line, conflicts should be less frequent, and easier to
resolve when they still occur.
Author: Andres Freund
Discussion: https://postgr.es/m/20191029200901.vww4idgcxv74cwes@alap3.anarazel.de
Historically, the code to build relation options has been shaped the
same way in multiple code paths by using a set of datums in input with
the options parsed with a static table which is then filled with the
option values. This introduces a new common routine in reloptions.c to
do most of the legwork for the in-core code paths.
Author: Amit Langote
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CA+HiwqGsoSn_uTPPYT19WrtR7oYpYtv4CdS0xuedTKiHHWuk_g@mail.gmail.com
The location of the session end hook has been chosen so as it is
possible to allow modules to do their own transactions, however any
trying to any any subsystem which went through before_shmem_exit()
would cause issues, limiting the pluggability of the hook.
Per discussion with Tom Lane and Andres Freund.
Discussion: https://postgr.es/m/18722.1569906636@sss.pgh.pa.us
Several buildfarm machines have been complaining about the new module
test_session_hooks to be unstable, like crake and thorntail. The issue
was that the module was trying to log some start and end session
activity for parallel workers, which makes little sense as they don't
support DML, so just prevent this pattern to happen in the module.
This could be reproduced by enforcing force_parallel_mode=regress, which
is the value used by some of the buildfarm members.
Discussion: https://postgr.es/m/20191001045246.GF2781@paquier.xyz
These hooks can be used in loadable modules. A simple test module is
included.
The first attempt was done with cd8ce3a but we lacked handling for
NO_INSTALLCHECK in the MSVC scripts (problem solved afterwards by
431f1599) so the buildfarm got angry. This also fixes a couple of
issues noticed upon review compared to the first attempt, so the code
has slightly changed, resulting in a more simple test module.
Author: Fabrízio de Royes Mello, Yugo Nagata
Reviewed-by: Andrew Dunstan, Michael Paquier, Aleksandr Parfenov
Discussion: https://postgr.es/m/20170720204733.40f2b7eb.nagata@sraoss.co.jp
Discussion: https://postgr.es/m/20190823042602.GB5275@paquier.xyz
The code was enforcing AccessExclusiveLock for all custom relation
options, which is incorrect as the APIs allow a custom lock level to be
set.
While on it, fix a couple of inconsistencies in the tests and the README
of dummy_index_am.
Oversights in commit 773df88.
Discussion: https://postgr.es/m/20190925234152.GA2115@paquier.xyz
All our current in core relation options of type string (not many,
admittedly) behave in reality like enums. But after seeing an
implementation for enum reloptions, it's clear that strings are messier,
so introduce the new reloption type. Switch all string options to be
enums instead.
Fortunately we have a recently introduced test module for reloptions, so
we don't lose coverage of string reloptions, which may still be used by
third-party modules.
Authors: Nikolay Shaplov, Álvaro Herrera
Reviewed-by: Nikita Glukhov, Aleksandr Parfenov
Discussion: https://postgr.es/m/43332102.S2V5pIjXRx@x200m
Several buildfarm members (crake, loach and spurfowl) are complaining
about two queries looking up at pg_class.reloptions which trigger the
validation routines for string reloptions with default values. This
commit limits the routines to be triggered only when building an index
with all custom options set in CREATE INDEX, which is sufficient for the
coverage.
Introduced by 640c198.
This includes more tests dedicated to relation options, bringing the
coverage of this code close to 100%, and the module can be used for
other purposes, like a base template for an index AM implementation.
Author: Nikolay Sharplov, Michael Paquier
Reviewed-by: Álvaro Herrera, Dent John
Discussion: https://postgr.es/m/17071942.m9zZutALE6@x200m
