Subject: [PATCHES] More psql and libpq patches
Well..these would be the last patches until the release (I hope)...
I ran the regression tests while watching psql under purify, and it did
not leak even one byte.
In this patch:
* Plugged a major leak when PSQL reads files for input (either through
\i options or through -f option)
* Fixed the one remaining leak in PSQL in not clearing PGresult *results
everywhere it is supposed to. (Thanks Tymm)
* Fixed A small leak in PSQL not clearing all the PGsettings correctly.
* A not-so-obvious (but small) leak in Libpq when PQsetdb fails for any
reason.
* Added \n to some Libpq error messages to make them easier to digest..
* Finally, added /* PURIFY */ comment to some of the code indicating
the reason for why it was added/changed...for future developers.
Subject: [PATCHES] memory leak patches in libpq and psql
A couple of small memory leak patches (detected with Purify) primarily
in libpq.
* Fixed (NULL) border problem in psql (run psql, do \m, then select
something from a table...row separators will be nulls)
* Fixed memory leak with the abovementioned border not being freed
properly.
* Fixed memory leak in freePGconn() not freeing conn->port
* Fixed up PQclear() to free parts of PGresult only if these
parts are not null.
* Fixed a decent memory leak that occured after executing every command
in psql. PGresult *results was not freed most of the time.
There is still a leak being detected (2 bytes) in readline functions, but
I think this is old readline library. I will install new one and test it.
Subject: [PATCHES] libpq patch
Hi,
here is a small patch which fixes two problems:
1. libpq/libpq-fe.h:
somehow disappeared the line
#define DefaultOption ""
now compilation stops with an error complainig an
unknown DefaultOption (970508).
2. Same patch as I sent already twice, but it never made it
into the source tree: there is no default value for
AuthType and Password. This way any libpq-application
(i.e. perl-scripts) which use the function PQconnectdb
will break with PostgreSQL-6.1. The patch simply uses
an empty string as default value.
Subject: [PATCHES] libpq SET var TO patch
One last, I hope. This one corrects a bogus format string, and
actually sends the contents of PG_DATESTYLE to the backend. That
means, you can do a setenv PG_DATESTYLE 'iso', and your libpq
will pick that up and tell the backend.
Subject: [PATCHES] 970417: some large object patches
Two patches here, made against 970417. Both have to do with large
objects:
1. lobjfuncs was not initialized in PQconnectdb. This causes
failure later if large objects are used. (Someone already
caught this error in PQsetdb.)
2. Postgres functions lo_import and lo_export sometimes
produce garbage for the file names because the filename
strings aren't always terminated by \0. (VARDATA isn't
necessarily null terminated.)
FreeBSD
The Makefile(s) have all been cleaned up such that there is a single
LDFLAGS vs LD_ADD or LDADD or LDFLAGS or LDFLAGS_BE. The Makefile(s)
should be alot more straightforward then they were before...and
consistent
Subject: [HACKERS] Small patch to pgtclCmds.c
Hi I have made the following small change to the extensions I made to
pgtclCmds.c quite a while ago.
At the moment there is a -assignbyidx option to pg_result assigning the
returned tuples to an array by using the 1st field of the select statement
as the key to the array.
eg "select name,age from vitalstatistics" will result in an array with
myarray(peter) = 32
myarray(paul) = 45
Often I need to have a pseudo-multi dimentional
array eg. "select name,age from vitalstatistics where occupation='plummer'
I would like to be able to generate an array
newarray(peter,overpaid) = 32
So to add a arbitrary string to the key value I have extended
pg_result $res -assignbyidx $arrayname
to have an optional argument
pg_result $res -assignbyidx $arrayname $appendstr
So that that string is appended to the key value.
Subject: [HACKERS] locale patches !
Hi there,
here are little patches to get Postgres 6.1 works with locale stuff.
This is a patch against 970402.tar.gz, there are no problem to apply them
by hand to 6.0 release. Collate stuff tested about 1-2 months in real
working database but I'm sure there must be no problem. US hackers
could vote against locale implementation ( locale for sure will affect to
speed of postgres ), so I introduce variable USE_LOCALE which
controls locale stuff. Non-US users now could use ~* operator
for searching and <order by> for strings with nation alphabet.
Please, don't forget, as I did first time, to set environment variable
LC_CTYPE and LC_COLLATE because backend get locale information from them.
I start postmaster from a little script, assuming that shell is Bash shell
it looks like:
#!/bin/sh
export LC_CTYPE=koi8-r
export LC_COLLATE=koi8-r
postmaster -B 1024 -S -D/usr/local/pgsql/data/ -o '-Fe'
The first fixes a warning from gcc about the assignment within the condition.
The extra set of parens should not make a difference, but with -Werror, they
are necessary.
The second fixes an "ln -s" invocation that assumes the current directory is
implicitly the target if not specified. Not true in all cases, and again, it
should not make a difference except to those implementation that it does.
From: "Michael P. Snyder" <msnyder@hawkeye.huntersmoon.com>
nicer. Also, I grabbed my copy of the Informix manual, and
added a couple of variables that make sense (formats for
money, time, a language setting, a timezone).
- New functions SetPGVariable() and GetPGVariable() in tcop/*.
These don't actually do anything for the moment, but should
be enough to implement the SET var_name TO var_val in the
parser?
SetPGVariable() expects just two strings, the var_name and
the var_value from above, and is expected to do the right thing.
Returns TRUE if everything okay.
From: "Martin J. Laubach" <mjl@wwx.vip.at>
of common routines in pqcomprim.c (pq communication primitives).
Not all adapted to it yet, but it's a start.
- Rewritten some of those routines, to write/read bigger chunks of
data, precomputing stuff in buffers instead of sending out byte
by byte.
- As a consequence, I need to know the endianness of the machine.
Currently I rely on getting it from machine/endian.h, but this
may not be available everywhere? (Who the hell thought it was
a good idea to pass integers to the backend the other way around
than the normal network byte order? *argl*)
- Libpq looks in the environment for magic variables, and upon
establishing a connection to the backend, sends it queries
of the form "SET var_name TO 'var_value'". This needs a change
in the backend parser (Mr. Parser, are you there? :)
- Currently it looks for two Env-Vars, namely PG_DATEFORMAT
and PG_FLOATFORMAT. What else makes sense? PG_TIMEFORMAT?
PG_TIMEZONE?
From: "Martin J. Laubach" <mjl@wwx.vip.at>
Subject: [HACKERS] Patches for 970316 compilation
I made a small pre-emptive change in the new datetime code to eliminate
calls to infnan(). Hopefully this will make Solaris (and probably other
non-GNUlib) systems happier. Didn't find fe-connect.h in the 970316
distribution, so made one up. Also, one of the test routines needs an
update for the geo-decls.h -> geo_decls.h name change.
Patches appear below...
Subject: [HACKERS] Patch for io routines
I am currently trying to improve on the front-backend communication
routines; and noticed that lots of code are duplicated for libpq and
the backend. This is a first patch that tries to share code between
the two, more to follow.
mjl
Subject: [HACKERS] password authentication
This patch adds support for plaintext password authentication. To use
it, you add a line like
host all 0.0.0.0 0.0.0.0 password pg_pwd.conf
to your pg_hba.conf, where 'pg_pwd.conf' is the name of a file containing
the usernames and password hashes in the format of the first two fields
of a Unix /etc/passwd file. (Of course, you can use a specific database
name or IP instead.)
Then, to connect with a password through libpq, you use the PQconnectdb()
function, specifying the "password=" tag in the connect string and also
adding the tag "authtype=password".
I also added a command-line switch '-u' to psql that tells it to prompt
for a username and password and use password authentication.
#if defined(aix)
#define TERMIOS_H_LOCATION <termios.h>
#else
#define TERMIOS_H_LOCATION <sys/termios.h>
#endif
libpq/fe-exec.c modified so that location of termios.h is determined
by whether HAVE_TERMIOS_H is defined or not, in preparation for switch
to configure
At least the first two should be fixed before the final release of 6.0.
1) There is a mismatch between the type declared in the catalog for
the input/output attributes of pg_type and the actual type of
values stored in the table. The type of typinput, typoutput,
typsend and typreceive are declared oid (26) while the values are
regproc (24). The error was there also in previous versions but
nobody noticed it until an Assert has been added in ExecEvalVar.
The effect is that it is now impossible to replace the typoutput
of existing data types with new procs.
2) The identd hba fails after the first time because the data read
from the identd socket is not zero-terminated and strlen reports
an incorrect length if the stack contains garbage, which usually
happens after the first connection has been made.
3) The new initdb wants to create itself the data directory. This
implies that the parent directory must be writable by postgres and
this may not always be desirable. A better solution would be to
allow the directory to be created by root and then filled by initdb.
It would also nice to have some reasonable default for PGLIB and
PGDATA like the previous version did. This applies also to the
postmaster executable.
Hi,
counting the empty dummy queries in libpq isn't everything.
If the backend sends an error, the I returns from the dummies
still come. So we must eat them up in any case, not just
returning on the occurence of an E reply.
Until later, Jan
these routines try to use the old pointer casting stuff to get
the connection id, second the notification hash table should
be part of the cliendData. Otherwise, one interpreter might
eat up the notifies for another one.
Please apply the patch below to the current 6.0 tree.
Submitted by: wieck@sapserv.debis.de
gmake of the code without interruption.
There's also some tidy-up of the MAXPATHLEN stuff based on the assumption that
all supported platforms have MAXPATHLEN defined in <sys/param.h>.
(The only unknowns for the above are AIX and IRIX5.)
PQexec handles the possibility of multiple results from one
query by simply submitting an empty query after the first
result and waiting for an 'I' message.
Rules can generate errors with transaction abort after the
first 'C' message was recieved (e.g. if a C-language function
used in a rule calls elog(WARN, ...)). Thus we have to look
for.
Jan(wieck@sapserv.debis.de)
In particular, no more compiled-in default for PGDATA or LIBDIR. Commands
that need them need either invocation options or environment variables.
PGPORT default is hardcoded as 5432, but overrideable with options or
environment variables.
following is the patch to libpq's large object interface that
removes the requirement to include fmgr.h into fe-lobj.c.
The large object interface now ask's the backend to tell the
OID's of all the required functions in pg_proc.
From: wieck@sapserv.debis.de (Jan Wieck)
other platforms). If I do the standard make + make install the shared library
is not linked with the the libpq library and when I try to load it in the
standard Tcl or Tk shell I get a lot of unresolved symbols. The bug doesn't
affect pgtclsh because it is linked also with libpq. The problem exists only
when using the dynamic load feature of Tcl7.5.
From: Massimo Dal Zotto <dz@cs.unitn.it>
Adds:
-lAttributes
Returns another format of the results attribute list. Per
attribute a sublist of {{attname} atttype attlen} is
returned and an empty string if no attributes where
received.
-numAttrs
Returns the number of attributes in the result.
function so I am going to assume that it is such a good idea that no
one sees any point in discussing it. :-) I have made two changes -
I have merged this into pgtclCmds.c and I have taken out any code for
updating tuples after the loop body runs. See comments for discussion
of this.
I have also fixed up the error checking stuff so that break, continue
and syntax errors have the expected result.
Submitted by: D'Arcy Cain
way one creates a database system. Parts that were in "make install"
are not either in "make all" or initdb. Nothing goes in the PGDATA
directory besides user data. Creating multiple database systems is
easier.
In addition to applying the patch, it is necessary to move the file
libpq/pg_hba to backend/libpq/pg_hba.sample.
Submitted by: Bryan Henderson <bryanh@giraffe.netgate.net>
attributes as tcl arrays. The previous code had problems with some chars
used as delimiter by Tcl. The new code should be more robust.
By: Massimo Dal Zotto <dz@cs.unitn.it>
Async notifies received while a backend is in the middle of a begin/end
transaction block are lost by libpq when the final end command is issued.
The bug is in the routine PQexec of libpq. The routine throws away any
message from the backend when a message of type 'C' is received. This
type of message is sent when the result of a portal query command with
no tuples is returned. Unfortunately this is the case of the end command.
As all async notification are sent only when the transaction is finished,
if they are received in the middle of a transaction they are lost in the
libpq library. I added some tracing code to PQexec and this is the output:
Submitted by: Massimo Dal Zotto <dz@cs.unitn.it>
|record, by a small patch to libpq++? At least until the
|feature that will allow dumped oid's to be re-loaded into
|a database becomes available, I need access to the oids
|of newly created records... To this end, I have written a
|three-line wrapper for the PQoidStatus function in libpq and
|named this wrapper OidStatus() (I'd appreciate suggestions for
|a name that would better fit into the general naming scheme).
|
|Regards,
|
|Ernst
|
When you connect to a database with PQsetdb, as with psql, depending on
how your uninitialized variables are set, you can get a failure with a
"There is no connection to the backend" message.
The fix is to move a call to PQexec() from inside connectDB() to
PQsetdb() after connectDB() returns to PQsetdb(). That way a connection
doesn't have to be already established in order to establish it!
From: bryanh@giraffe.netgate.net (Bryan Henderson)
|Here is a fix for the psql alignment problem. It turns out that libpq
|was trying to determine if the column contained only numeric values so
|it could right justify it. The 'e' values were taked as exponient
|values and all columns were considered numeric.
|
|The patch excludes 'e' and 'E' as being valid first-column numeric
|values.
|
Submitted by: Bruce...
|We're all too familiar with psql's "no response from backend" message.
|Users can't tell what this means, and psql continues prompting for
|commands after it even though the backend is dead and no commands can
|succeed. It eventually dies on a signal when the dead socket fills
|up. I extended the message to offer a better explanation and made
|psql exit when it finds the backend is dead.
|
|I also added a short message and newline when the user does a ctl-D so
|it doesn't mess up the terminal display.
|
|
Submitted by: Bryan Henderson <bryanh@giraffe.netgate.net>
Attached is a patch to allow libpq to determine if a field is null.
This is needed because text fields will return a PQgetlength() of 0
whether it is '' or NULL. There is even a comment in the source noting
the fact.
I have changed the value of the 'len' field for NULL result fields. If
the field is null, the len is set to -1 (NULL_LEN). I have changed
PQgetlength() to return a 0 length for both '' and NULL. A new function
PQgetisnull() returns true or false for NULL.
The only risk is to applications that do not use the suggested
PQgetlength() call, but read the result 'len' field directly.
As this is not recommended, I think we are safe here.
A separate documentation patch will be sent.
Submitted by: Bruce Momjian <maillist@candle.pha.pa.us>
Here are a few minor fixes to Postgres95. Mostly I have added const
to some of the char pointers. There was also a missing header file
and a place where it looks like "==" was used when "=" was meant.
I also changed some variables from Pfin and Pfout tp pfin and pfout
because the latter shadow global variables and that just seems like
an unsafe practice which I like to avoid.
Submitted by: "D'Arcy J.M. Cain" <darcy@druid.druid.com>
Kerberos is being used (attempt to free static memory).
The error was caused by a confusing doublespeak of fe_getauthname():
Returns a pointer to static memory, if you authenticate via Kerberos,
a pointer to dynamic memory otherwise.
Submitted by: Erich Stamberger <eberger@gewi.kfunigraz.ac.at>
compatibility. There isn't much difference here against my previous
PQprint() code, except that you can add optional arguments to the
<table args> in html.
Most of the changes in here look to b epurely cosmetic, and don't
affect anything...
...and some stuff is completely questionable...in that I may have reversed
some of the stuf fwe already had :(
before (plus some optimisations/bug fixes et al). I've included a small
demo transcript below. Note that all of of the display
functionality/intelligence you see here, can be had merely by calling
the new LIBPQ PQprint() routine with the appropriate arguments/options,
including the HTML3 output guff.
submitted by: Julian Assange <proff@suburbia.net>