A couple of newer ones are available. There are no functional
differences, but let's get them in anyway, so that there is no
surprise diff next time someone wants to do some actual work in this
area.
The error message for trying to run the TAP tests in a tree not
configured with --enable-tap-tests is quite terse, and could be
made more helpful to new developers onboarding to postgres. This
adds a small hint on how to get the tests running in such cases.
Author: Kevin Burke <kevin@burke.dev>
Discussion: https://postgr.es/m/CAKcy5ejKVYwUXguQcd6i9KHDm7cM7FzjQ+aayaPveoa_woyQpQ@mail.gmail.com
Some specific logic is done at the end of recovery when involving 2PC
transactions:
1) Call RecoverPreparedTransactions(), to recover the state of 2PC
transactions into memory (re-acquire locks, etc.).
2) ShutdownRecoveryTransactionEnvironment(), to move back to normal
operations, mainly cleaning up recovery locks and KnownAssignedXids
(including any 2PC transaction tracked previously).
3) Switch XLogCtl->SharedRecoveryState to RECOVERY_STATE_DONE, which is
the tipping point for any process calling RecoveryInProgress() to check
if the cluster is still in recovery or not.
Any snapshot taken between steps 2) and 3) would be empty, causing any
transaction relying on a snapshot at this point to potentially corrupt
data as there could still be some 2PC transactions to track, with
RecentXmin moving backwards on successive calls to GetSnapshotData() in
the same transaction.
As SharedRecoveryState is the point to take into account to know if it
is safe to discard KnownAssignedXids, this commit moves step 2) after
step 3), so as we can never finish with empty snapshots.
This exists since the introduction of hot standby, so backpatch all the
way down. The window with incorrect snapshots is extremely small, but I
have seen it when running 023_pitr_prepared_xact.pl, as did buildfarm
member fairywren. Thomas Munro also found it independently. Special
thanks to Andres Freund for taking the time to analyze this issue.
Reported-by: Thomas Munro, Michael Paquier
Analyzed-by: Andres Freund
Discussion: https://postgr.es/m/20210422203603.fdnh3fu2mmfp2iov@alap3.anarazel.de
Backpatch-through: 9.6
Prior to v14, we insisted that the query in RETURN QUERY be of a type
that returns tuples. (For instance, INSERT RETURNING was allowed,
but not plain INSERT.) That happened indirectly because we opened a
cursor for the query, so spi.c checked SPI_is_cursor_plan(). As a
consequence, the error message wasn't terribly on-point, but at least
it was there.
Commit 2f48ede08 lost this detail. Instead, plain RETURN QUERY
insisted that the query be a SELECT (by checking for SPI_OK_SELECT)
while RETURN QUERY EXECUTE failed to check the query type at all.
Neither of these changes was intended.
The only convenient place to check this in the EXECUTE case is inside
_SPI_execute_plan, because we haven't done parse analysis until then.
So we need to pass down a flag saying whether to enforce that the
query returns tuples. Fortunately, we can squeeze another boolean
into struct SPIExecuteOptions without an ABI break, since there's
padding space there. (It's unlikely that any extensions would
already be using this new struct, but preserving ABI in v14 seems
like a smart idea anyway.)
Within spi.c, it seemed like _SPI_execute_plan's parameter list
was already ridiculously long, and I didn't want to make it longer.
So I thought of passing SPIExecuteOptions down as-is, allowing that
parameter list to become much shorter. This makes the patch a bit
more invasive than it might otherwise be, but it's all internal to
spi.c, so that seems fine.
Per report from Marc Bachmann. Back-patch to v14 where the
faulty code came in.
Discussion: https://postgr.es/m/1F2F75F0-27DF-406F-848D-8B50C7EEF06A@gmail.com
The "equality implies image equality" opclass infrastructure disallowed
deduplication in system catalog indexes and TOAST indexes before now.
That seemed like the right approach back when the infrastructure was
added by commit 612a1ab7, since ALTER INDEX cannot set deduplicate_items
to 'off' (due to an old implementation restriction). But that decision
now seems arbitrary at best. Remove special case handling implementing
this policy.
No catversion bump, since existing catalog indexes will still work.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-Wz=rYQHFaJ3WYBdK=xgwxKzaiGMSSrh-ZCREa-pS-7Zjew@mail.gmail.com
This corrects a bunch of entries in win32_tzmap[], and adds a few
new ones, based on the CLDR project's windowsZones.xml file.
Non-cosmetic changes fall into four main categories:
* Flat-out errors:
US/Aleutan doesn't exist
America/Salvador doesn't exist
Asia/Baku is wrong for Yerevan
Asia/Dhaka (Bangladesh) is wrong for Astana (Kazakhstan)
Europe/Bucharest is wrong for Chisinau
America/Mexico_City is wrong for Chetumal
America/Buenos_Aires is wrong for Cayenne
America/Caracas has its own zone, so poor fit for La Paz
US/Eastern is wrong for Haiti
US/Eastern is wrong for Indiana (East)
Asia/Karachi is wrong for Tashkent
Etc/UTC+12 doesn't exist
Signs of Etc/GMT zones were backwards
* Judgment calls:
(These changes follow CLDR's choices, except for the first one)
Use Europe/London for "Greenwich Standard Time", since that seems much
more likely than Africa/Casablanca to be what people will think that
zone name means. CLDR has Atlantic/Reykjavik here, but that's no better.
Asia/Shanghai seems a better fit than Hong Kong for "China Standard
Time".
Europe/Sarajevo is now a link to Belgrade, ie "Central Europe Standard
Time"; so use Warsaw for "Central European Standard Time".
America/Sao_Paulo seems more representative than Araguaina for
"E. South America Standard Time".
Africa/Johannesburg seems more representative than Harare for
"South Africa Standard Time".
* New Windows zone names:
"Israel Standard Time"
"Kaliningrad Standard Time"
"Russia Time Zone N" for various N
"Singapore Standard Time"
"South Sudan Standard Time"
"W. Central Africa Standard Time"
"West Bank Standard Time"
"Yukon Standard Time"
Some of these replace older spellings, but I kept the older spellings
too in case our code runs on a machine with the older data.
* Replace aliases (tzdb Links) with underlying city-named zones:
(This tracks tzdb's longstanding practice, and reduces inconsistency
with the rest of the entries, as well as with CLDR.)
US/Alaska
Asia/Kuwait
Asia/Muscat
Canada/Atlantic
Australia/Canberra
Canada/Saskatchewan
US/Central
US/Eastern
US/Hawaii
US/Mountain
Canada/Newfoundland
US/Pacific
Back-patch to all supported branches, as is our usual practice for
time zone data updates.
Discussion: https://postgr.es/m/3266414.1633045628@sss.pgh.pa.us
The original intent seems to have been to sort case-insensitively
by the Windows zone name, but various changes over the years did
not get that memo. This commit just moves a few entries to
restore exact alphabetic order, to ease comparison to the outputs
of processing scripts.
Back-patch to all supported branches, as is our usual practice for
time zone data updates.
Discussion: https://postgr.es/m/3266414.1633045628@sss.pgh.pa.us
The previous approach didn't really work on windows, due to the PATH separator
being ';' not ':'. Instead of making the PATH change more complicated,
reference the binary using the TESTDIR environment.
Reported-By: Andres Freund <andres@anarazel.de>
Suggested-By: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/20210930214040.odkdd42vknvzifm6@alap3.anarazel.de
Backpatch: 14-, where the test was introduced.
Commit ff9f111bce added some test code that's unportable and doesn't
add meaningful coverage. Remove it rather than try and get it to work
everywhere.
While at it, fix a typo in a log message added by the aforementioned
commit.
Backpatch to 14.
Discussion: https://postgr.es/m/3000074.1632947632@sss.pgh.pa.us
The intermittent h buffer was not freed, causing it to leak. Backpatch
through 14 where HMAC was refactored to the current API.
Author: Sergey Shinderuk <s.shinderuk@postgrespro.ru>
Discussion: https://postgr.es/m/af07e620-7e28-a742-4637-2bc44aa7c2be@postgrespro.ru
Backpatch-through: 14
get_variable_range() would incautiously believe that statistics
containing only an MCV list are sufficient to derive a range estimate.
That's okay for an enum-like column that contains only MCVs, but
otherwise the estimate could be pretty bad. Make it report that the
range is indeterminate unless the MCVs plus nullfrac account for
the whole table.
I don't think this needs a dedicated test case, since a quick code
coverage check verifies that the existing regression tests traverse
all the alternatives. There is room to doubt that a future-proof
test case could be built anyway, given that the submitted example
accidentally doesn't fail before v11.
Per bug #17207 from Simon Perepelitsa. Back-patch to v10.
In principle this has been broken all along, but I'm hesitant to
make such changes in 9.6, since if anyone is unhappy with 9.6.24's
behavior there will be no second chance to fix it.
Discussion: https://postgr.es/m/17207-5265aefa79e333b4@postgresql.org
Commit 84f5c2908 forgot to consider the possibility that
EnsurePortalSnapshotExists could run inside a subtransaction with
lifespan shorter than the Portal's. In that case, the new active
snapshot would be popped at the end of the subtransaction, leaving
a dangling pointer in the Portal, with mayhem ensuing.
To fix, make sure the ActiveSnapshot stack entry is marked with
the same subtransaction nesting level as the associated Portal.
It's certainly safe to do so since we won't be here at all unless
the stack is empty; hence we can't create an out-of-order stack.
Let's also apply this logic in the case where PortalRunUtility
sets portalSnapshot, just to be sure that path can't cause similar
problems. It's slightly less clear that that path can't create
an out-of-order stack, so add an assertion guarding it.
Report and patch by Bertrand Drouvot (with kibitzing by me).
Back-patch to v11, like the previous commit.
Discussion: https://postgr.es/m/ff82b8c5-77f4-3fe7-6028-fcf3303e82dd@amazon.com
This field was recently added in db632fbca, however that commit missed one
place where it should have initialized the new field to NULL. The missed
location is where the PartitionBoundInfo is created for partition-wise
join relations. Technically there could be interleaved partitions in a
partition-wise join relation, but currently the only optimization we use
this field for only does so for base rels and other member rels. So just
document that we don't populate this field for join rels.
Reported-by: Amit Langote
Author: Amit Langote, David Rowley
Reviewed-by: Amit Langote, David Rowley
Discussion: https://postgr.es/m/CA+HiwqE76Rps24kwHsd2Cr82Ua07tJC9t9reG0c7ScX9n_xrEA@mail.gmail.com
Computing related timestamps by subtracting "N days" is sensitive
to the prevailing timezone, since we interpret that as "same local
time on the N'th prior day". Even though the intervals in question
are only two to four days, through remarkable bad luck they managed
to cross the end of Ramadan in 2014, causing the test's output to
change if timezone is set to Africa/Casablanca. (Maybe in other
Muslim areas as well; I didn't check.) There's absolutely no reason
for this test to exercise interval subtraction, so just get rid of
that and use plain timestamptz constants representing the intended
values.
Per report from Andres Freund. Back-patch to v10 where this test
script came in.
Discussion: https://postgr.es/m/20210930183641.7lh4jhvpipvromca@alap3.anarazel.de
Add ETIMEDOUT to ALL_CONNECTION_FAILURE_ERRNOS' list of "errnos that
identify hard failure of a previously-established network connection".
While one could imagine that this is sometimes recoverable, the same
could be said of other entries such as ENETDOWN.
In support of this, handle ETIMEDOUT on par with other socket errors
in relevant infrastructure, such as TranslateSocketError().
(I made a couple of cosmetic adjustments in TranslateSocketError(),
too.) The code now assumes that ETIMEDOUT is defined everywhere,
which it should be given that POSIX has required it since SUSv2.
Perhaps this should be back-patched, but I'm hesitant to do so given
the lack of previous complaints, and the hazard that there's a small
ABI break on Windows from redefining the symbol. Even if we decide
to do that, it'd be prudent to let this bake awhile in HEAD first.
Jelte Fennema
Discussion: https://postgr.es/m/AM5PR83MB01782BFF2978505F6D6C559AF7AA9@AM5PR83MB0178.EURPRD83.prod.outlook.com
First, as pointed out by Tom Lane and Michael Paquier, I failed to
realize that Windows' PostgresNode needs an extra pg_hba.conf line
(added by PostgresNode->set_replication_conf, called internally by
->init() when 'allows_streaming=>1' is given -- but I purposefully
omitted that). I think a good fix should be to have nodes with only
'has_archiving=>1' set up for replication too, but that's a bigger
discussion. Fix it by calling ->set_replication_conf, which is not
unprecedented, as pointed out by Andrew Dunstan.
I also forgot to uncomment a ->finish() call for a pumpable IPC::Run
file descriptor. Apparently this is innocuous in almost all platforms.
Backpatch to 14. The older branches were added this file too, but not
this particular part of the test.
Discussion: https://postgr.es/m/3000074.1632947632@sss.pgh.pa.us
Discussion: https://postgr.es/m/YVT7qwhR8JmC2kfz@paquier.xyz
Physical replication always ships WAL segment files to replicas once
they are complete. This is a problem if one WAL record is split across
a segment boundary and the primary server crashes before writing down
the segment with the next portion of the WAL record: WAL writing after
crash recovery would happily resume at the point where the broken record
started, overwriting that record ... but any standby or backup may have
already received a copy of that segment, and they are not rewinding.
This causes standbys to stop following the primary after the latter
crashes:
LOG: invalid contrecord length 7262 at A8/D9FFFBC8
because the standby is still trying to read the continuation record
(contrecord) for the original long WAL record, but it is not there and
it will never be. A workaround is to stop the replica, delete the WAL
file, and restart it -- at which point a fresh copy is brought over from
the primary. But that's pretty labor intensive, and I bet many users
would just give up and re-clone the standby instead.
A fix for this problem was already attempted in commit 515e3d84a0, but
it only addressed the case for the scenario of WAL archiving, so
streaming replication would still be a problem (as well as other things
such as taking a filesystem-level backup while the server is down after
having crashed), and it had performance scalability problems too; so it
had to be reverted.
This commit fixes the problem using an approach suggested by Andres
Freund, whereby the initial portion(s) of the split-up WAL record are
kept, and a special type of WAL record is written where the contrecord
was lost, so that WAL replay in the replica knows to skip the broken
parts. With this approach, we can continue to stream/archive segment
files as soon as they are complete, and replay of the broken records
will proceed across the crash point without a hitch.
Because a new type of WAL record is added, users should be careful to
upgrade standbys first, primaries later. Otherwise they risk the standby
being unable to start if the primary happens to write such a record.
A new TAP test that exercises this is added, but the portability of it
is yet to be seen.
This has been wrong since the introduction of physical replication, so
backpatch all the way back. In stable branches, keep the new
XLogReaderState members at the end of the struct, to avoid an ABI
break.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Nathan Bossart <bossartn@amazon.com>
Discussion: https://postgr.es/m/202108232252.dh7uxf6oxwcy@alvherre.pgsql
Previously socket errors such as invalid socket or socket wait method failures
during benchmark caused pgbench to exit with status 0. Instead, errors during
the run should result in exit status 2.
Back-patch to v12 where pgbench started reporting exit status.
Original complaint and patch by Hayato Kuroda.
Author: Yugo Nagata, Fabien COELHO
Reviewed-by: Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/TYCPR01MB5870057375ACA8A73099C649F5349@TYCPR01MB5870.jpnprd01.prod.outlook.com
The failure of socket wait method like "select()" doesn't terminate pgbench.
So the log level of error message when that failure happens should be ERROR.
But previously FATAL was used in that case.
Back-patch to v13 where pgbench started using common logging API.
Author: Yugo Nagata, Fabien COELHO
Reviewed-by: Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/20210617005934.8bd37bf72efd5f1b38e6f482@sraoss.co.jp
The code inconsistently used "statistic object" or "statistics" where
the correct term, as discussed, is actually "statistics object". This
improves the state of the code to be more consistent.
While on it, fix an incorrect error message introduced in a4d75c8. This
error should never happen, as the code states, but it would be
misleading.
Author: Justin Pryzby
Reviewed-by: Álvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/20210924215827.GS831@telsasoft.com
Backpatch-through: 14
A forked logging collector in EXEC_BACKEND builds passes down file
descriptors (or HANDLEs in WIN32) through a command for files to be
reopened (for stderr and csvlog). Some of its logic was duplicated, and
this commit refactors the code with some wrapper routines for file
reopening after forking and fd grabbing when building the command for
the fork.
While on it, this simplifies a use of "long" in the code, introduced by
ab0ba6e to take care of a warning related to MinGW-W64 when mapping a
intptr_t to a printed value. "long" is 32-bit long on Windows, and
interoperability of Win32 and Win64 ensures that handles are always
32-bit significant, so we can just use "int" for the same result. This
also makes the new routines more symmetric.
This change makes easier the introduction of new log destinations in the
logging collector, and this is not the only piece of refactoring
planned. I have tested this change with EXEC_BACKEND on linux, macos,
and of course MSVC (both Win32 and Win64), but not MinGW so the
buildfarm may have something to say here.
Author: Sehrope Sarkuni, Michael Paquier
Discussion: https://postgr.es/m/CAH7T-aqswBM6JWe4pDehi1uOiufqe06DJWaU5=X7dDLyqUExHg@mail.gmail.com
Sequences were left out of the list of relation kinds that
verify_heapam knew how to check, though it is fairly trivial to allow
them. Doing that, and while at it, updating pg_amcheck to include
sequences in relations matched by table and relation patterns.
Author: Mark Dilger <mark.dilger@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/81ad4757-92c1-4aa3-7bee-f609544837e3%40enterprisedb.com
Several mistakes have piled in the code comments over the time,
including incorrect grammar, function names and simple typos. This
commit takes care of a portion of these.
No backpatch is done as this is only cosmetic.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20210924215827.GS831@telsasoft.com
Discussing the low level issue of nbtree VACUUM and recovery conflicts
in btvacuumpage() now seems inappropriate. The same issue is discussed
in nbtxlog.h, as well as in a comment block above _bt_delitems_vacuum().
The comment block made more sense when it was part of a broader
discussion of nbtree VACUUM "pin scans". These were removed by commit
9f83468b.
Splitting the time field into days and microseconds is pretty
useless when we're just going to recombine those values.
It's unclear if anyone will notice the speedup in real-world
cases, but a cycle shaved is a cycle earned.
Discussion: https://postgr.es/m/2629129.1632675713@sss.pgh.pa.us
_bt_delitems_delete() is no longer the high-level entry point used by
index tuple deletion driven by index tuples whose LP_DEAD bits are set
(now called "simple index tuple deletion"). It became a lower level
routine that's only called by _bt_delitems_delete_check() following
commit d168b66682.
Remove obsolete reference to lazy_vacuum()'s onecall argument. The
function argument was removed by commit 3499df0dee.
Also remove adjoining comment block that introduces the wraparound
failsafe concept. Talking about the failsafe here no longer makes
sense, since lazy_vacuum() (and related functions) are no longer the
only place where the failsafe might be triggered. This has been the
case since commit c242baa4a8 taught VACUUM to consider triggering the
failsafe mechanism during its initial heap scan.
Point out that index tuple deletion generally needs a latestRemovedXid
value for the deletion operation's WAL record. This is bound to be the
most expensive part of the whole deletion operation now that it takes
place up front, during original execution.
This was arguably an oversight in commit 558a9165e0, which moved the
work required to generate these values from index deletion REDO routines
to original execution of index deletion operations.
unicode_east_asian_fw_table.h should not be compiled standalone, similarly
to unicode_combining_table.h, but cpluspluscheck did not get the memo.
Oversight in bab982161.
Per report from Tom Lane
That allows to include just visibilitymapdefs.h from file.c, and in turn,
remove include of postgres.h from relcache.h.
Reported-by: Andres Freund
Discussion: https://postgr.es/m/20210913232614.czafiubr435l6egi%40alap3.anarazel.de
Author: Alexander Korotkov
Reviewed-by: Andres Freund, Tom Lane, Alvaro Herrera
Backpatch-through: 13
Calculating degree of a functional dependency may allocate a lot of
memory - we have released mot of the explicitly allocated memory, but
e.g. detoasted varlena values were left behind. That may be an issue,
because we consider a lot of dependencies (all combinations), and the
detoasting may happen for each one again.
Fixed by calling dependency_degree() in a dedicated context, and
resetting it after each call. We only need the calculated dependency
degree, so we don't need to copy anything.
Backpatch to PostgreSQL 10, where extended statistics were introduced.
Backpatch-through: 10
Discussion: https://www.postgresql.org/message-id/20210915200928.GP831%40telsasoft.com
Until now, all extended statistics on a given relation were built in the
same memory context, without resetting. Some of the memory was released
explicitly, but not all of it - for example memory allocated while
detoasting values is hard to free. This is how it worked since extended
statistics were introduced in PostgreSQL 10, but adding support for
extended stats on expressions made the issue somewhat worse as it
increases the number of statistics to build.
Fixed by adding a memory context which gets reset after building each
statistics object (all the statistics kinds included in it). Resetting
it after building each statistics kind would be even better, but it
would require more invasive changes and copying of results, making it
harder to backpatch.
Backpatch to PostgreSQL 10, where extended statistics were introduced.
Author: Justin Pryzby
Reported-by: Justin Pryzby
Reviewed-by: Tomas Vondra
Backpatch-through: 10
Discussion: https://www.postgresql.org/message-id/20210915200928.GP831%40telsasoft.com
Checking that an offset number isn't past the end of a heap page's line
pointer array was just a defensive sanity check for HOT-chain traversal
code before commit 3c3b8a4b. It's etrictly necessary now, though. Add
comments that reference the issue to code in heapam that needs to get it
right.
Per suggestion from Alexander Lakhin.
Discussion: https://postgr.es/m/f76a292c-9170-1aef-91a0-59d9443b99a3@gmail.com
Updates/Deletes on a partition were allowed even without replica identity
after the parent table was added to a publication. This would later lead
to an error on subscribers. The reason was that we were not invalidating
the partition's relcache and the publication information for partitions
was not getting rebuilt. Similarly, we were not invalidating the
partitions' relcache after dropping a partitioned table from a publication
which will prohibit Updates/Deletes on its partition without replica
identity even without any publication.
Reported-by: Haiying Tang
Author: Hou Zhijie and Vignesh C
Reviewed-by: Vignesh C and Amit Kapila
Backpatch-through: 13
Discussion: https://postgr.es/m/OS0PR01MB6113D77F583C922F1CEAA1C3FBD29@OS0PR01MB6113.jpnprd01.prod.outlook.com
It is not appropriate for deduplication to apply single value strategy
when triggered by a bottom-up index deletion pass. This wastes cycles
because later bottom-up deletion passes will overinterpret older
duplicate tuples that deduplication actually just skipped over "by
design". It also makes bottom-up deletion much less effective for low
cardinality indexes that happen to cross a meaningless "index has single
key value per leaf page" threshold.
To fix, slightly narrow the conditions under which deduplication's
single value strategy is considered. We already avoided the strategy
for a unique index, since our high level goal must just be to buy time
for VACUUM to run (not to buy space). We'll now also avoid it when we
just had a bottom-up pass that reported failure. The two cases share
the same high level goal, and already overlapped significantly, so this
approach is quite natural.
Oversight in commit d168b666, which added bottom-up index deletion.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WznaOvM+Gyj-JQ0X=JxoMDxctDTYjiEuETdAGbF5EUc3MA@mail.gmail.com
Backpatch: 14-, where bottom-up deletion was introduced.
This addresses two issues with the tests added in 0c39c292 for runtime
GUCs:
- Re-enable the test on Msys. The test could fail because of \r\n
generated by Msys perl. 0d91c52a has taken care of this issue.
- Allow the test to run in the context of a privileged account. CIs
running under privileged accounts would fail on permission failures, as
reported by Andres Freund. This issue is fixed by wrapping the postgres
command within pg_ctl as the latter will take care of any permissions
needed. The test checking a failure of postgres -C for a runtime
parameter with an instance running is removed, as pg_ctl produces an
unstable error code (no need for a CI to reproduce that).
Discussion: https://postgr.es/m/20210921032040.lyl4lcax37aedx2x@alap3.anarazel.de
Contrary to the output of native perl, Msys perl generates outputs with
CRLFs characters. There are already places in the TAP code where CRLFs
(\r\n) are automatically converted to LF (\n) on Msys, but we missed a
couple of places when running commands and using their output for
comparison, that would lead to failures.
This problem has been found thanks to the test added in 5adb067 using
TestLib::command_checks_all(), but after a closer look more code paths
were missing a filter.
This is backpatched all the way down to prevent any surprises if a new
test is introduced in stable branches.
Reviewed-by: Andrew Dunstan, Álvaro Herrera
Discussion: https://postgr.es/m/1252480.1631829409@sss.pgh.pa.us
Backpatch-through: 9.6
Before commit 84f5c2908, a STABLE function in a plpgsql CALL
statement's argument list would see an up-to-date snapshot,
because exec_stmt_call would push a new snapshot. I got rid of
that because the possibility of the snapshot disappearing within
COMMIT made it too hard to manage a snapshot across the CALL
statement. That's fine so far as the procedure itself goes,
but I forgot to think about the possibility of STABLE functions
within the CALL argument list. As things now stand, those'll
be executed with the Portal's snapshot as ActiveSnapshot,
keeping them from seeing updates more recent than Portal startup.
(VOLATILE functions don't have a problem because they take their
own snapshots; which indeed is also why the procedure itself
doesn't have a problem. There are no STABLE procedures.)
We can fix this by pushing a new snapshot transiently within
ExecuteCallStmt itself. Popping the snapshot before we get
into the procedure proper eliminates the management problem.
The possibly-useless extra snapshot-grab is slightly annoying,
but it's no worse than what happened before 84f5c2908.
Per bug #17199 from Alexander Nawratil. Back-patch to v11,
like the previous patch.
Discussion: https://postgr.es/m/17199-1ab2561f0d94af92@postgresql.org
I noticed that commit 0bead9af48 left this flag undocumented in
XLogSetRecordFlags, which led me to discover that the flag doesn't
actually do what the one comment on it said it does. Improve the
situation by adding some more comments.
Backpatch to 14, where the aforementioned commit appears.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/202109212119.c3nhfp64t2ql@alvherre.pgsql
This runtime-computed GUC shows the number of huge pages required
for the server's main shared memory area, taking advantage of the
work done in 0c39c29 and 0bd305e. This is useful for users to estimate
the amount of huge pages required for a server as it becomes possible to
do an estimation without having to start the server and potentially
allocate a large chunk of shared memory.
The number of huge pages is calculated based on the existing GUC
huge_page_size if set, or by using the system's default by looking at
/proc/meminfo on Linux. There is nothing new here as this commit reuses
the existing calculation methods, and just exposes this information
directly to the user. The routine calculating the huge page size is
refactored to limit the number of files with platform-specific flags.
This new GUC's name was the most popular choice based on the discussion
done. This is only supported on Linux.
I have taken the time to test the change on Linux, Windows and MacOS,
though for the last two ones large pages are not supported. The first
one calculates correctly the number of pages depending on the existing
GUC huge_page_size or the system's default.
Thanks to Andres Freund, Robert Haas, Kyotaro Horiguchi, Tom Lane,
Justin Pryzby (and anybody forgotten here) for the discussion.
Author: Nathan Bossart
Discussion: https://postgr.es/m/F2772387-CE0F-46BF-B5F1-CC55516EB885@amazon.com
A broken HOT chain is not an unexpected condition, even when the offset
number points past the end of the page's line pointer array.
heap_prune_chain() does not (and never has) treated this condition as
unexpected, so derivative code in heap_index_delete_tuples() shouldn't
do so either.
Oversight in commit 4228817449.
The assertion can probably only fail on Postgres 14 and master. Earlier
releases don't have commit 3c3b8a4b, which taught VACUUM to truncate the
line pointer array of heap pages. Backpatch all the same, just to be
consistent.
Author: Peter Geoghegan <pg@bowt.ie>
Reported-By: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/17197-9438f31f46705182@postgresql.org
Backpatch: 12-, just like commit 4228817449.
The upcoming shared memory stats patch drops stats for dropped objects in a
transactional manner, rather than removing them later as part of vacuum. This
means that stats for DROP inside a transaction needs to handle aborted
(sub-)transactions similar to TRUNCATE: The stats up to the DROP should be
restored.
Rename the existing infrastructure in preparation.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210405092914.mmxqe7j56lsjfsej@alap3.anarazel.de
An upcoming patch will add additional work to these functions. To avoid the
functions getting too complicated / doing too many things at once, split out
sub-tasks into their own functions.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210405092914.mmxqe7j56lsjfsej@alap3.anarazel.de
Since introduction of extended statistics, we've disallowed references
to system columns. So for example
CREATE STATISTICS s ON ctid FROM t;
would fail. But with extended statistics on expressions, it was possible
to work around this limitation quite easily
CREATE STATISTICS s ON (ctid::text) FROM t;
This is an oversight in a4d75c86bf, fixed by adding a simple check.
Backpatch to PostgreSQL 14, where support for extended statistics on
expressions was introduced.
Backpatch-through: 14
Discussion: https://postgr.es/m/20210816013255.GS10479%40telsasoft.com
It was harder than necessary to understand PostgresMain() because the code for
a normal backend was interspersed with single-user mode specific code. Split
most of the single-user mode code into its own function
PostgresSingleUserMain(), that does all the necessary setup for single-user
mode, and then hands off after that to PostgresMain().
There still is some single-user mode code in InitPostgres(), and it'd likely
be worth moving at least some of it out. But that's for later.
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210802164124.ufo5buo4apl6yuvs@alap3.anarazel.de
The following things are improved:
- Fetch the system identifier from the source server before any
WAL streaming loop. This triggers extra checks to make sure that
pg_receivewal is still connected to a server with the same system ID
with a correct timeline.
- Switch umask() (for file creation mode mask) and RetrieveWalSegSize()
(to fetch the size of WAL segments) a bit later before the initial
stream attempt. If the connection was done with a database,
pg_receivewal would fail but those commands were still executed, which
was a waste. The slot creation and drop are now done before retrieving
the segment size.
Author: Bharath Rupireddy
Reviewed-by: Ronan Dunklau, Michael Paquier
Discussion: https://postgr.es/m/CALj2ACX00YYeyBfoi55Cy=NrP-FcfMgiYYx1qRUEib3yjCVoaA@mail.gmail.com
Commit 55dc86eca changed pull_varnos to use (if possible) the associated
ph_eval_at for a PlaceHolderVar. I missed a fine point though: we might
be looking at a PHV in the quals or tlist of a child appendrel, in which
case we need to compute a ph_eval_at value that's been translated in the
same way that the PHV itself has been (cf. adjust_appendrel_attrs).
Fortunately, enough info is available in the PlaceHolderInfo to make
such translation possible without additional outside data, so we don't
need another round of uglification of planner APIs. This is a little
bit complicated, but since it's a hard-to-hit corner case, I'm not much
worried about adding cycles here.
Per report from Jaime Casanova. Back-patch to v12, like the previous
commit.
Discussion: https://postgr.es/m/20210915230959.GB17635@ahch-to
A WAL segment closed during a WAL stream for pg_receivewal would
generate incorrect error messages depending on the context, as the file
name used when referring to a WAL segment ignored partial files or the
compression method used. In such cases, the error message generated
(failure on close, seek or rename) would not match a physical file
name. The same code paths are used by pg_basebackup, but it uses no
partial suffix so it is not impacted.
7fbe0c8 has introduced in walmethods.c a callback to get the exact
physical file name used for a given context, this commit makes use of it
to improve those error messages. This could be extended to more code
paths of pg_basebackup/ in the future, if necessary.
Extracted from a larger patch by the same author.
Author: Georgios Kokolatos
Discussion: https://postgr.es/m/ZCm1J5vfyQ2E6dYvXz8si39HQ2gwxSZ3IpYaVgYa3lUwY88SLapx9EEnOf5uEwrddhx2twG7zYKjVeuP5MwZXCNPybtsGouDsAD1o2L_I5E=@pm.me
The output generated on Msys is incorrect because of the different way
IPC::Run processes outputs with native Perl (converts natively \r\n to
\n) and Msys perl (\r\n kept as-is), causing this test to fail.
For now, just disable the test to bring the buildfarm to a green state.
I think that the correct long-term solution would be to tweak all the
routines command_checks_* in PostgresNode.pm to handle this output like
psql does when using Msys, by discarding \r automatically before
comparing it.
Per report from jacana and fairywren. Thanks to Tom Lane for the ping.
Discussion: https://postgr.es/m/1252480.1631829409@sss.pgh.pa.us
The rewriter transformation for SEARCH BREADTH FIRST produces a
FieldSelect on a Var of type RECORD, where the Var references the
recursive union's worktable output. EXPLAIN VERBOSE failed to handle
this case, because it only expected such Vars to appear in CteScans
not WorkTableScans. Fix that, and add some test cases exercising
EXPLAIN on SEARCH and CYCLE queries.
In principle this oversight is an old bug, but it seems that the
case is unreachable without SEARCH BREADTH FIRST, because the
parser fails when attempting to create such a reference manually.
So for today I'll just patch HEAD/v14. Someday we might find that
the code portion of this patch needs to be back-patched further.
Per report from Atsushi Torikoshi.
Discussion: https://postgr.es/m/5bafa66ad529e11860339565c9e7c166@oss.nttdata.com
An upcoming patch splits single user mode into its own function. This makes
that easier. Split out for easier review / testing.
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210802164124.ufo5buo4apl6yuvs@alap3.anarazel.de
Session statistics, as introduced by 960869da08, had several shortcomings:
- an additional GetCurrentTimestamp() call that also impaired the accuracy of
the data collected
This can be avoided by passing the current timestamp we already have in
pgstat_report_stat().
- an additional statistics UDP packet sent every 500ms
This is solved by adding the new statistics to PgStat_MsgTabstat.
This is conceptually ugly, because session statistics are not
table statistics. But the struct already contains data unrelated
to tables, so there is not much damage done.
Connection and disconnection are reported in separate messages, which
reduces the number of additional messages to two messages per session and a
slight increase in PgStat_MsgTabstat size (but the same number of table
stats fit).
- Session time computation could overflow on systems where long is 32 bit.
Reported-By: Andres Freund <andres@anarazel.de>
Author: Andres Freund <andres@anarazel.de>
Author: Laurenz Albe <laurenz.albe@cybertec.at>
Discussion: https://postgr.es/m/20210801205501.nyxzxoelqoo4x2qc%40alap3.anarazel.de
Backpatch: 14-, where the feature was introduced.
ProcArrayGroupClearXid function has a parameter named "proc",
but the same name was used for its local variables. This commit fixes
this variable shadowing, to improve code readability.
Back-patch to all supported versions, to make future back-patching
easy though this patch is classified as refactoring only.
Reported-by: Ranier Vilela
Author: Ranier Vilela, Aleksander Alekseev
https://postgr.es/m/CAEudQAqyoTZC670xWi6w-Oe2_Bk1bfu2JzXz6xRfiOUzm7xbyQ@mail.gmail.com
All size_t variables declared in procarray.c are actually int ones.
Let's use int instead of size_t for those variables. Which would
reduce Wsign-compare compiler warnings.
Back-patch to v14 where commit 941697c3c1 added size_t variables
in procarray.c, to make future back-patching easy though
this patch is classified as refactoring only.
Reported-by: Ranier Vilela
Author: Ranier Vilela, Aleksander Alekseev
https://postgr.es/m/CAEudQAqyoTZC670xWi6w-Oe2_Bk1bfu2JzXz6xRfiOUzm7xbyQ@mail.gmail.com
Until now, the -C option of postgres was handled before a small subset
of GUCs computed at runtime are initialized, leading to incorrect
results as GUC machinery would fall back to default values for such
parameters.
For example, data_checksums could report "off" for a cluster as the
control file is not loaded yet. Or wal_segment_size would show a
segment size at 16MB even if initdb --wal-segsize used something else.
Worse, the command would fail to properly report the recently-introduced
shared_memory, that requires to load shared_preload_libraries as these
could ask for a chunk of shared memory.
Support for runtime GUCs comes with a limitation, as the operation is
now allowed on a running server. One notable reason for this is that
_PG_init() functions of loadable libraries are called before all
runtime-computed GUCs are initialized, and this is not guaranteed to be
safe to do on running servers. For the case of shared_memory_size,
where we want to know how much memory would be used without allocating
it, this limitation is fine. Another case where this will help is for
huge pages, with the introduction of a different GUC to evaluate the
amount of huge pages required for a server before starting it, without
having to allocate large chunks of memory.
This feature is controlled with a new GUC flag, and four parameters are
classified as runtime-computed as of this change:
- data_checksums
- shared_memory_size
- data_directory_mode
- wal_segment_size
Some TAP tests are added to provide some coverage here, using
data_checksums in the tests of pg_checksums.
Per discussion with Andres Freund, Justin Pryzby, Magnus Hagander and
more.
Author: Nathan Bossart
Discussion: https://postgr.es/m/F2772387-CE0F-46BF-B5F1-CC55516EB885@amazon.com
An upcoming patch splits single user mode handling out of PostgresMain(). The
startup time only needs to be determined in single user mode. Currently the
initialization happens late, which makes the split a bit harder. As postmaster
determines the time earlier it makes sense to move the time for single user
mode to a roughly similar point in time.
Reviewd-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210802164124.ufo5buo4apl6yuvs@alap3.anarazel.de
Up to now the size of a query's rangetable has been limited by the
constants INNER_VAR et al, which mustn't be equal to any real
rangetable index. 65000 doubtless seemed like enough for anybody,
and it still is orders of magnitude larger than the number of joins
we can realistically handle. However, we need a rangetable entry
for each child partition that is (or might be) processed by a query.
Queries with a few thousand partitions are getting more realistic,
so that the day when that limit becomes a problem is in sight,
even if it's not here yet. Hence, let's raise the limit.
Rather than just increase the values of INNER_VAR et al, this patch
adopts the approach of making them small negative values, so that
rangetables could theoretically become as long as INT_MAX.
The bulk of the patch is concerned with changing Var.varno and some
related variables from "Index" (unsigned int) to plain "int". This
is basically cosmetic, with little actual effect other than to help
debuggers print their values nicely. As such, I've only bothered
with changing places that could actually see INNER_VAR et al, which
the parser and most of the planner don't. We do have to be careful
in places that are performing less/greater comparisons on varnos,
but there are very few such places, other than the IS_SPECIAL_VARNO
macro itself.
A notable side effect of this patch is that while it used to be
possible to add INNER_VAR et al to a Bitmapset, that will now
draw an error. I don't see any likelihood that it wouldn't be a
bug to include these fake varnos in a bitmapset of real varnos,
so I think this is all to the good.
Although this touches outfuncs/readfuncs, I don't think a catversion
bump is required, since stored rules would never contain Vars
with these fake varnos.
Andrey Lepikhov and Tom Lane, after a suggestion by Peter Eisentraut
Discussion: https://postgr.es/m/43c7f2f5-1e27-27aa-8c65-c91859d15190@postgrespro.ru
It's possible to execute user-defined SQL in some background processes;
for example, logical replication workers can fire triggers. This opens
the possibility that someone would try to execute LISTEN in such a
context. But since only regular backends ever call
ProcessNotifyInterrupt, no messages would actually be received, and
thus the registered listener would simply prevent the message queue
from being cleaned. Eventually NOTIFY would stop working, which is bad.
Perhaps someday somebody will invent infrastructure to make listening
in a background worker actually useful. In the meantime, forbid it.
Back-patch to v13, which is where we introduced the MyBackendType
variable. It'd be a lot harder to implement the check without that,
and it doesn't seem worth the trouble.
Discussion: https://postgr.es/m/153243441449.1404.2274116228506175596@wrigleys.postgresql.org
In most cases, the prefix string in a node output is the upper case of
the node structure name, e.g., MergeAppend -> MERGEAPPEND. There were
a few exceptions that for either no apparent reason or perhaps minor
aesthetic reasons deviated from this. In order to simplify this and
perhaps allow automatic generation without having to deal with
exception cases, make them all match.
Discussion: https://www.postgresql.org/message-id/c091e5cd-45f8-69ee-6a9b-de86912cc7e7@enterprisedb.com
Also remove obsolete comments about why the 64-bit integers need to be
printed in a separate buffer. The reason used to be portability, but
now the remaining reason is that we need the string lengths for the
progress displays. That is evident by looking at the code right
below, so a new comment doesn't seem necessary.
All the types supported were listed directly in the README, but it was
very outdated. Rather than listing all the types supported in the
README, this commit adds a reference to look at ResourceOwnerData in
resowner.c to get this information.
The order of the paragraphs is reworked a bit for clarity.
Author: Amit Langote
Discussion: https://postgr.es/m/CA+HiwqHtfT9z=4H5+F7DOy0OyNHAaVwuRcakt9b2t2uADOaiag@mail.gmail.com
pg_import_system_collations() was a bit inconsistent about how it
reported locales (names output by "locale -a") that it didn't make
pg_collation entries for. IMV we should print some suitable message
for every locale that we reject, except when it matches a pre-existing
pg_collation entry. (This is all at DEBUG1 log level, though, so as
not to create noise during initdb.) Add messages for the two cases
that were previously not logged, namely unrecognized encoding and
client-only encoding. Re-word the existing messages to have a
consistent style.
Anton Voloshin and Tom Lane
Discussion: https://postgr.es/m/429d64ee-188d-3ce1-106a-53a8b45c4fce@postgrespro.ru
Formerly, we sent signals for outgoing NOTIFY messages within
ProcessCompletedNotifies, which was also responsible for sending
relevant ones of those messages to our connected client. It therefore
had to run during the main-loop processing that occurs just before
going idle. This arrangement had two big disadvantages:
* Now that procedures allow intra-command COMMITs, it would be
useful to send NOTIFYs to other sessions immediately at COMMIT
(though, for reasons of wire-protocol stability, we still shouldn't
forward them to our client until end of command).
* Background processes such as replication workers would not send
NOTIFYs at all, since they never execute the client communication
loop. We've had requests to allow triggers running in replication
workers to send NOTIFYs, so that's a problem.
To fix these things, move transmission of outgoing NOTIFY signals
into AtCommit_Notify, where it will happen during CommitTransaction.
Also move the possible call of asyncQueueAdvanceTail there, to
ensure we don't bloat the async SLRU if a background worker sends
many NOTIFYs with no one listening.
We can also drop the call of asyncQueueReadAllNotifications,
allowing ProcessCompletedNotifies to go away entirely. That's
because commit 790026972 added a call of ProcessNotifyInterrupt
adjacent to PostgresMain's call of ProcessCompletedNotifies,
and that does its own call of asyncQueueReadAllNotifications,
meaning that we were uselessly doing two such calls (inside two
separate transactions) whenever inbound notify signals coincided
with an outbound notify. We need only set notifyInterruptPending
to ensure that ProcessNotifyInterrupt runs, and we're done.
The existing documentation suggests that custom background workers
should call ProcessCompletedNotifies if they want to send NOTIFY
messages. To avoid an ABI break in the back branches, reduce it
to an empty routine rather than removing it entirely. Removal
will occur in v15.
Although the problems mentioned above have existed for awhile,
I don't feel comfortable back-patching this any further than v13.
There was quite a bit of churn in adjacent code between 12 and 13.
At minimum we'd have to also backpatch 51004c717, and a good deal
of other adjustment would also be needed, so the benefit-to-risk
ratio doesn't look attractive.
Per bug #15293 from Michael Powers (and similar gripes from others).
Artur Zakirov and Tom Lane
Discussion: https://postgr.es/m/153243441449.1404.2274116228506175596@wrigleys.postgresql.org
It's possible for us to copy an AlternativeSubPlan expression node
into multiple places, for example the scan quals of several
partition children. Then it's possible that we choose a different
one of the alternatives as optimal in each place. Commit 41efb8340
failed to consider this scenario, so its attempt to remove "unused"
subplans could remove subplans that were still used elsewhere.
Fix by delaying the removal logic until we've examined all the
AlternativeSubPlans in a given query level. (This does assume that
AlternativeSubPlans couldn't get copied to other query levels, but
for the foreseeable future that's fine; cf qual_is_pushdown_safe.)
Per report from Rajkumar Raghuwanshi. Back-patch to v14
where the faulty logic came in.
Discussion: https://postgr.es/m/CAKcux6==O3NNZC3bZ2prRYv3cjm3_Zw1GfzmOjEVqYN4jub2+Q@mail.gmail.com
We have a few WRITE_{name of type}_ARRAY macros, but the one case
using the Index type was hand-coded. Wrap it into a macro as well.
This also changes the behavior slightly: Before, the field name was
skipped if the length was zero. Now it prints the field name even in
that case. This is more consistent with how other array fields are
handled.
Reviewed-by: Jacob Champion <pchampion@vmware.com>
Discussion: https://www.postgresql.org/message-id/c091e5cd-45f8-69ee-6a9b-de86912cc7e7@enterprisedb.com
If an allocation failed within LLVM it is not safe to call back into LLVM as
LLVM is not generally safe against exceptions / stack-unwinding. Thus errors
while in LLVM code are promoted to FATAL. However llvm_shutdown() did call
back into LLVM even in such cases, while llvm_release_context() was careful
not to do so.
We cannot generally skip shutting down LLVM, as that can break profiling. But
it's OK to do so if there was an error from within LLVM.
Reported-By: Jelte Fennema <Jelte.Fennema@microsoft.com>
Author: Andres Freund <andres@anarazel.de>
Author: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/AM5PR83MB0178C52CCA0A8DEA0207DC14F7FF9@AM5PR83MB0178.EURPRD83.prod.outlook.com
Backpatch: 11-, where jit was introduced
Two functions, both named check_permissions(), used the same checks to
verify if a user had required privileges to work on replication slots.
This commit removes the duplication, and moves the function doing the
checks to slot.c to be centralized.
Author: Bharath Rupireddy
Reviewed-by: Nathan Bossart, Euler Taveira
Discussion: https://postgr.es/m/CALj2ACUPpVw1u7sQocFVWrSs0n10pt_G_4NPZKSxXK6cW1dErw@mail.gmail.com
Commits ffa2e4670 and 52a10224e caused libpq's connection-establishment
functions to usually leave a nonempty string in the connection's
errorMessage buffer, even after a successful connection. While that
was intentional on my part, more sober reflection says that it wasn't
a great idea: the string would be a bit confusing. Also this broke at
least one application that checked for connection success by examining
the errorMessage, instead of using PQstatus() as documented. Let's
clear the buffer at success exit, restoring the pre-v14 behavior.
Discussion: https://postgr.es/m/4170264.1620321747@sss.pgh.pa.us
Ordinarily, using EXIT this way would draw "control reached end of
function without RETURN". However, if the function is one where we
don't require an explicit RETURN (such as a DO block), that should
not happen. It did anyway, because add_dummy_return() neglected to
account for the case.
Per report from Herwig Goemans. Back-patch to all supported branches.
Discussion: https://postgr.es/m/868ae948-e3ca-c7ec-95a6-83cfc08ef750@gmail.com
While processing toast changes in logical decoding, we rejigger the
tuple change to point to in-memory toast tuples instead to on-disk toast
tuples. And, to make sure the memory accounting is correct, we were
subtracting the old change size and then after re-computing the new tuple,
re-adding its size at the end. Now, if there is any error before we add
the new size, we will release the changes and that will update the
accounting info (subtracting the size from the counters). And we were
underflowing there which leads to an assertion failure in assert enabled
builds and wrong memory accounting in reorder buffer otherwise.
Author: Bertrand Drouvot
Reviewed-by: Amit Kapila
Backpatch-through: 13, where memory accounting was introduced
Discussion: https://postgr.es/m/92b0ee65-b8bd-e42d-c082-4f3f4bf12d34@amazon.com
An out-of-memory failure happening when allocating the structures to
store the connection parameter keywords and values would mess up with
the set of connections saved, as on failure the pthread mutex would
still be hold with the new connection object listed but free()'d.
Rather than just unlocking the mutex, which would leave the static list
of connections into an inconsistent state, move the allocation for the
structures of the connection parameters before beginning the test
manipulation. This ensures that the list of connections and the
connection mutex remain consistent all the time in this code path.
This error is unlikely going to happen, but this could mess up badly
with ECPG clients in surprising ways, so backpatch all the way down.
Reported-by: ryancaicse
Discussion: https://postgr.es/m/17186-b4cfd8f0eb4d1dee@postgresql.org
Backpatch-through: 9.6
These are added in the existing tests of pg_ctl for log rotation, that
already tested stderr. The same amount of coverage is added for csvlog:
- Checks for pg_current_logfile().
- Log rotation with expected file name.
- Log contents generated.
This test is refactored to minimize the amount of work required to add
tests for new log formats, easing some upcoming work.
Author: Michael Paquier, Sehrope Sarkuni
Discussion: https://postgr.es/m/CAH7T-aqswBM6JWe4pDehi1uOiufqe06DJWaU5=X7dDLyqUExHg@mail.gmail.com
The previous protocol expected a set of matching characters to check if
a message sent was the last one or not, that changed depending on the
destination wanted:
- 't' and 'f' tracked the last message of a log sent to stderr.
- 'T' and 'F' tracked the last message of a log sent to csvlog.
This could be extended with more characters when introducing new
destinations, but using a bitmask is much more elegant. This commit
changes the protocol so as a bitmask is used in the header of a log
chunk message sent to the syslogger, with the following options
available for now:
- log_destination as stderr.
- log_destination as csvlog.
- if a message is the last chunk of a message.
Sehrope found this issue in a patch set to introduce JSON as an option
for log_destination, but his patch made the size of the protocol header
larger. This commit keeps the same size as the original, and adapts the
protocol as wanted.
Thanks also to Andrew Dunstan and Greg Stark for the discussion.
Author: Michael Paquier, Sehrope Sarkuni
Discussion: https://postgr.es/m/CAH7T-aqswBM6JWe4pDehi1uOiufqe06DJWaU5=X7dDLyqUExHg@mail.gmail.com
If search_start is greater than the length of the string, we should just
return REG_NOMATCH immediately. (Note that the equality case should
*not* be rejected, since the pattern might be able to match zero
characters.) This guards various internal assumptions that the min of a
range of string positions is not more than the max. Violation of those
assumptions could allow an attempt to fetch string[search_start-1],
possibly causing a crash.
Jaime Casanova pointed out that this situation is reachable with the
new regexp_xxx functions that accept a user-specified start position.
I don't believe it's reachable via any in-core call site in v14 and
below. However, extensions could possibly call pg_regexec with an
out-of-range search_start, so let's back-patch the fix anyway.
Discussion: https://postgr.es/m/20210911180357.GA6870@ahch-to
We have long forbidden fetching backwards from a NO SCROLL cursor,
but the prohibition didn't extend to cases in which we rewind the
query altogether and then re-fetch forwards. I think the reason is
that this logic was mainly meant to protect plan nodes that can't
be run in the reverse direction. However, re-reading the query output
is problematic if the query is volatile (which includes SELECT FOR
UPDATE, not just queries with volatile functions): the re-read can
produce different results, which confuses the cursor navigation logic
completely. Another reason for disliking this approach is that some
code paths will either fetch backwards or rewind-and-fetch-forwards
depending on the distance to the target row; so that seemingly
identical use-cases may or may not draw the "cursor can only scan
forward" error. Hence, let's clean things up by disallowing rewind
as well as fetch-backwards in a NO SCROLL cursor.
Ordinarily we'd only make such a definitional change in HEAD, but
there is a third reason to consider this change now. Commit ba2c6d6ce
created some new user-visible anomalies for non-scrollable cursors
WITH HOLD, in that navigation in the cursor result got confused if the
cursor had been partially read before committing. The only good way
to resolve those anomalies is to forbid rewinding such a cursor, which
allows removal of the incorrect cursor state manipulations that
ba2c6d6ce added to PersistHoldablePortal.
To minimize the behavioral change in the back branches (including
v14), refuse to rewind a NO SCROLL cursor only when it has a holdStore,
ie has been held over from a previous transaction due to WITH HOLD.
This should avoid breaking most applications that have been sloppy
about whether to declare cursors as scrollable. We'll enforce the
prohibition across-the-board beginning in v15.
Back-patch to v11, as ba2c6d6ce was.
Discussion: https://postgr.es/m/3712911.1631207435@sss.pgh.pa.us
This switches the default ACL to what the documentation has recommended
since CVE-2018-1058. Upgrades will carry forward any old ownership and
ACL. Sites that declined the 2018 recommendation should take a fresh
look. Recipes for commissioning a new database cluster from scratch may
need to create a schema, grant more privileges, etc. Out-of-tree test
suites may require such updates.
Reviewed by Peter Eisentraut.
Discussion: https://postgr.es/m/20201031163518.GB4039133@rfd.leadboat.com
Some plan node types don't react well to being called again after
they've already returned NULL. PortalRunSelect() has long dealt
with this by calling the executor with NoMovementScanDirection
if it sees that we've already run the portal to the end. However,
commit ba2c6d6ce overlooked this point, so that persisting an
already-fully-fetched cursor would fail if it had such a plan.
Per report from Tomas Barton. Back-patch to v11, as the faulty
commit was. (I've omitted a test case because the type of plan
that causes a problem isn't all that stable.)
Discussion: https://postgr.es/m/CAPV2KRjd=ErgVGbvO2Ty20tKTEZZr6cYsYLxgN_W3eAo9pf5sw@mail.gmail.com
When throttling is used, transactions that lag behind schedule by
more than the latency limit are counted and reported as skipped.
Previously, there was the case where pgbench counted all skipped
transactions even if the timer specified in -T option was exceeded.
This could take a very long time to do that especially when unrealistically
high rate setting in -R option caused quite a lot of transactions that
lagged behind schedule. This could prevent pgbench from ending
immediately, and so pgbench could look like it got stuck to users.
To fix the issue, this commit changes pgbench so that it stops counting
skipped transactions as soon as the timer is exceeded. The timer can
make pgbench end soon even when there are lots of skipped transactions
that have not been counted yet.
Note that there is no guarantee that all skipped transactions are
counted under -T though there is under -t. This is OK in practice
because it's very unlikely to happen with realistic setting. Also this is
not the issue that this commit newly introdues. There used to be
the case where pgbench ended without counting all skipped
transactions since before.
Back-patch to v14. Per discussion, we decided not to bother
back-patch to the stable branches because it's hard to imagine
the issue happens in practice (with realistic setting).
Author: Yugo Nagata, Fabien COELHO
Reviewed-by: Greg Sabino Mullane, Fujii Masao
Discussion: https://postgr.es/m/20210613040151.265ff59d832f835bbcf8b3ba@sraoss.co.jp
We don't allow relations to exceed 2^32-1 blocks, because block
numbers are 32 bits and the last possible block number is reserved
to mean InvalidBlockNumber. There is a check for this in mdextend,
but that's really way too late, because the smgr API requires us to
create a buffer for the block-to-be-added, and we do not want to
have any buffer with blocknum InvalidBlockNumber. (Such a case
can trigger assertions in bufmgr.c, plus I think it might confuse
ReadBuffer's logic for data-past-EOF later on.) So put the check
into ReadBuffer.
Per report from Christoph Berg. It's been like this forever,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/YTn1iTkUYBZfcODk@msg.credativ.de
Previously, walreceiver always closed the currently-opened WAL segment
and created its archive notification file, after it finished writing
the current segment up and received any WAL data that should be
written into the next segment. If walreceiver exited just before
any WAL data in the next segment arrived at standby, it did not
create the archive notification file of the current segment
even though that's known completed. This behavior could cause
WAL archiving of the segment to be delayed until subsequent
restartpoints or checkpoints created its notification file.
To fix the issue, this commit changes walreceiver so that it creates
an archive notification file of a current WAL segment immediately
if that's known completed before receiving next WAL data.
Back-patch to all supported branches.
Reported-by: Kyotaro Horiguchi
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/20200630.165503.1465894182551545886.horikyota.ntt@gmail.com
The Value node struct is a weird construct. It is its own node type,
but most of the time, it actually has a node type of Integer, Float,
String, or BitString. As a consequence, the struct name and the node
type don't match most of the time, and so it has to be treated
specially a lot. There doesn't seem to be any value in the special
construct. There is very little code that wants to accept all Value
variants but nothing else (and even if it did, this doesn't provide
any convenient way to check it), and most code wants either just one
particular node type (usually String), or it accepts a broader set of
node types besides just Value.
This change removes the Value struct and node type and replaces them
by separate Integer, Float, String, and BitString node types that are
proper node types and structs of their own and behave mostly like
normal node types.
Also, this removes the T_Null node tag, which was previously also a
possible variant of Value but wasn't actually used outside of the
Value contained in A_Const. Replace that by an isnull field in
A_Const.
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/5ba6bc5b-3f95-04f2-2419-f8ddb4c046fb@enterprisedb.com
Casting the argument of strVal() to (Value *) is useless, since
strVal() already does that.
Most code didn't do that anyway; this was apparently just a style that
snuck into certain files.
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/5ba6bc5b-3f95-04f2-2419-f8ddb4c046fb@enterprisedb.com
Coverity complained that one caller of getFormattedTypeName() failed
to free the returned string. Which is true, but rather than fixing
that one, let's get rid of this tedious and error-prone requirement.
Now that getFormattedTypeName() caches its result, strdup'ing that
result and expecting the caller to free it accomplishes little except
to waste cycles. We do create a leak in the case where getTypes didn't
make a TypeInfo for the type, but that basically shouldn't ever happen.
Back-patch, as commit 6c450a861 was. This isn't a particularly
interesting bug fix, but the API change seems like a hazard for
future back-patching activity if we don't back-patch it.
Various psql backslash commands have both single-letter and long
forms, for example \e and \edit. Previously, tab completion
generally offered the single-letter form but not the long form.
It seems more sensible to offer the long form, because (a) no
useful completion can happen when you've already typed the single
letter, and (b) if you're not so familiar with the command set
as to know that, the long form is likely to be less confusing.
Haiying Tang, reviewed by Dagfinn Ilmari Mannsåker and myself
Discussion: https://postgr.es/m/OS0PR01MB61136018064660F095CB57A8FB129@OS0PR01MB6113.jpnprd01.prod.outlook.com
If we copy data-modifying CTEs from the original query to a replacement
query (from a DO INSTEAD rule), we must set hasModifyingCTE properly
in the replacement query. Failure to do this can cause various
unpleasantness, such as unsafe usage of parallel plans. The code also
neglected to propagate hasRecursive, though that's only cosmetic at
the moment.
A difficulty arises if the rule action is an INSERT...SELECT. We
attach the original query's RTEs and CTEs to the sub-SELECT Query, but
data-modifying CTEs are only allowed to appear in the topmost Query.
For the moment, throw an error in such cases. It would probably be
possible to avoid this error by attaching the CTEs to the top INSERT
Query instead; but that would require a bunch of new code to adjust
ctelevelsup references. Given the narrowness of the use-case, and
the need to back-patch this fix, it does not seem worth the trouble
for now. We can revisit this if we get field complaints.
Per report from Greg Nancarrow. Back-patch to all supported branches.
(The test case added here does not fail before v10, but there are
plenty of places checking top-level hasModifyingCTE in 9.6, so I have
no doubt that this code change is necessary there too.)
Greg Nancarrow and Tom Lane
Discussion: https://postgr.es/m/CAJcOf-f68DT=26YAMz_i0+Au3TcLO5oiHY5=fL6Sfuits6r+_w@mail.gmail.com
Discussion: https://postgr.es/m/CAJcOf-fAdj=nDKMsRhQzndm-O13NY4dL6xGcEvdX5Xvbbi0V7g@mail.gmail.com
The correct nomenclature for the highest privileged user is superuser
and not "super user", this replaces the few instances where that was
used erroneously. No user-visible changes are done as all changes are
in comments, so no back-patching.
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/CALj2ACW3snGBD8BAQiArMDS1Y43LuX3ymwO+N8aUg1Hrv6hYNw@mail.gmail.com
Commit 01e658fa74 added hash support for row types. This also added
support for hashing anonymous record types, using the same approach
that the type cache uses for comparison support for record types: It
just reports that it works, but it might fail at run time if a
component type doesn't actually support the operation. We get away
with that for comparison because most types support that. But some
types don't support hashing, so the current state can result in
failures at run time where the planner chooses hashing over sorting,
whereas that previously worked if only sorting was an option.
We do, however, want the record hashing support for path tracking in
recursive unions, and the SEARCH and CYCLE clauses built on that. In
that case, hashing is the only plan option. So enable that, this
commit implements the following approach: The type cache does not
report that hashing is available for the record type. This undoes
that part of 01e658fa74. Instead, callers that require hashing no
matter what can override that result themselves. This patch only
touches the callers to make the aforementioned recursive query cases
work, namely the parse analysis of unions, as well as the hash_array()
function.
Reported-by: Sait Talha Nisanci <sait.nisanci@microsoft.com>
Bug: #17158
Discussion: https://www.postgresql.org/message-id/flat/17158-8a2ba823982537a4%40postgresql.org
Updates/Deletes on a relation were allowed even without replica identity
after we define the publication for all tables. This would later lead to
an error on subscribers. The reason was that for such publications we were
not invalidating the relcache and the publication information for
relations was not getting rebuilt. Similarly, we were not invalidating the
relcache after dropping of such publications which will prohibit
Updates/Deletes without replica identity even without any publication.
Author: Vignesh C and Hou Zhijie
Reviewed-by: Hou Zhijie, Kyotaro Horiguchi, Amit Kapila
Backpatch-through: 10, where it was introduced
Discussion: https://postgr.es/m/CALDaNm0pF6zeWqCA8TCe2sDuwFAy8fCqba=nHampCKag-qLixg@mail.gmail.com
This runtime-computed GUC shows the size of the server's main shared
memory area, taking into account the amount of shared memory allocated
by extensions as this is calculated after processing
shared_preload_libraries.
Author: Nathan Bossart
Discussion: https://postgr.es/m/F2772387-CE0F-46BF-B5F1-CC55516EB885@amazon.com
All the code paths simplified here were already using a boolean or used
an expression that led to zero or one, making the extra bits
unnecessary.
Author: Justin Pryzby
Reviewed-by: Tom Lane, Michael Paquier, Peter Smith
Discussion: https://postgr.es/m/20210428182936.GE27406@telsasoft.com
Previously pgwin32_is_service() would falsely return true when postgres is
started from somewhere within a service, but not as a service. That is
e.g. always the case with windows docker containers, which some CI services
use to run windows tests in.
When postgres falsely thinks its running as a service, no messages are
writting to stdout / stderr. That can be very confusing and causes a few tests
to fail.
To fix additionally check if stderr is invalid in pgwin32_is_service(). For
that to work in backend processes, pg_ctl is changed to pass down handles so
that postgres can do the same check (otherwise "default" handles are created).
While this problem exists in all branches, there have been no reports by
users, the prospective CI usage currently is only for master, and I am not a
windows expert. So doing the change in only master for now seems the sanest
approach.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Magnus Hagander <magnus@hagander.net>
Discussion: https://postgr.es/m/20210305185752.3up5eq2eanb7ofmb@alap3.anarazel.de
Similar to LogicalIncreaseRestartDecodingForSlot() add a debug message to
LogicalIncreaseXminForSlot() reporting a new catalog_xmin candidate.
This just adds additional diagnostic information during logical decoding that
can aid debugging.
Author: Ashutosh Bapat
Reviewed-by: Masahiko Sawada, Amit Kapila
Discussion: https://postgr.es/m/CAExHW5usQWbiUz0hHOCu5twS1O9DvpcPojf6sor=8q--VUuMbA@mail.gmail.com
We make each AIX shared library export all globals found in .o files
that originate in the library. That doesn't include symbols acquired by
-lpgcommon_shlib. That is good on average, but it became a problem for
libpq when commit e6afa8918c moved five
official libpq API symbols into src/common. Fix this by implementing
the SHLIB_EXPORTS mechanism for AIX, so affected libraries export the
same symbols that they export on Linux. This reintroduces symbols
pg_encoding_to_char, pg_utf_mblen, pg_char_to_encoding,
pg_valid_server_encoding, and pg_valid_server_encoding_id. Back-patch
to v13, where the aforementioned commit first appeared. While a minor
release is usually the wrong time to add or remove symbol exports in
libpq or libecpg, we should expect users to want each documented symbol.
Tony Reix
Discussion: https://postgr.es/m/PR3PR02MB6396742E2FC3E77D37A920BC86C79@PR3PR02MB6396.eurprd02.prod.outlook.com
These encapsulate a relation when referred from replication DDL.
Currently they don't do anything useful (they're just wrappers around
RangeVar and Relation respectively) but in the future they'll be used to
carry column lists.
Extracted from a larger patch by Rahila Syed.
Author: Rahila Syed <rahilasyed90@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/CAH2L28vddB_NFdRVpuyRBJEBWjz4BSyTB=_ektNRH8NJ1jf95g@mail.gmail.com
pgtime.h documented the PG interpretation of tm_mon right alongside
the POSIX interpretation of tm_year, with no hint that neither
comment was correct throughout our code.
Perhaps someday we ought to switch to using two separate struct
definitions to provide a clearer indication of which semantics are
in use where. But I fear the tedium-versus-safety-gain tradeoff
would not be very good.
Discussion: https://postgr.es/m/CAJ7c6TOMG8zSNEZtCn5SPe+cCk3Lfxb71ZaQwT2F4T7PJ_t=KA@mail.gmail.com
Historically, timetz_zone() has used time(NULL) as the reference point
for deciding whether DST is active. That means its result can change
intra-statement, requiring it to be marked VOLATILE (cf. 35979e6c3).
But that definition is pretty inconsistent with the way we deal with
timestamps elsewhere. Let's make it use the transaction start time
("now()") as the reference point instead. That lets it be marked
STABLE, and also saves a kernel call per invocation.
While at it, remove the function's use of pg_time_t and pg_localtime.
Those are inconsistent with the other code in this area, which indeed
created a bug: timetz_zone() delivered completely wrong answers if
the zone was specified by a dynamic TZ abbreviation. (We need to do
something about that in the back branches, but the fix will look
different from this.)
Aleksander Alekseev and Tom Lane
Discussion: https://postgr.es/m/CAJ7c6TOMG8zSNEZtCn5SPe+cCk3Lfxb71ZaQwT2F4T7PJ_t=KA@mail.gmail.com
This change refactors the shared memory size calculation in
CreateSharedMemoryAndSemaphores() to its own function. This is intended
for use in a future change related to the setup of huge pages and shared
memory with some GUCs, while useful on its own for extensions.
Author: Nathan Bossart
Discussion: https://postgr.es/m/F2772387-CE0F-46BF-B5F1-CC55516EB885@amazon.com
Attempting to make hashfloat4() look as much as possible like
hashfloat8(), I'd figured I could replace NaNs with get_float4_nan()
before widening to float8. However, results from protosciurus
and topminnow show that on some platforms that produces a different
bit-pattern from get_float8_nan(), breaking the intent of ce773f230.
Rearrange so that we use the result of get_float8_nan() for all NaN
cases. As before, back-patch.
Replace fixed-length command buffers with psprintf() calls. We didn't
have anything as convenient as psprintf() when this code was written,
but now that we do, there's little reason for the limitation to
stand. Removing it eliminates some corner cases where (for example)
starting the postmaster with a whole lot of options fails.
Most individual file names that pg_ctl deals with are still restricted
to MAXPGPATH, but we've seldom had complaints about that limitation
so long as it only applies to one filename.
Back-patch to all supported branches.
Phil Krylov
Discussion: https://postgr.es/m/567e199c6b97ee19deee600311515b86@krylov.eu
Previously this was allowed, but the collation effectively vanished
into the ether because of the way lookup_collation() works: you could
not use the collation, nor even drop it. Seems better to give an
error up front than to leave the user wondering why it doesn't work.
(Because this test is in DefineCollation not CreateCollation, it does
not prevent pg_import_system_collations from creating ICU collations,
regardless of the initially-chosen encoding.)
Per bug #17170 from Andrew Bille. Back-patch to v10 where ICU support
was added.
Discussion: https://postgr.es/m/17170-95845cf3f0a9c36d@postgresql.org
543f36b43d was too hasty in thinking that the volatility of date_bin()
had to match date_trunc(), since only the latter references
session_timezone.
Bump catversion
Per feedback from Aleksander Alekseev
Backpatch to v14, as the former commit was
Modern POSIX seems to require strtod() to accept "-NaN", but there's
nothing about NaN in SUSv2, and some of our oldest buildfarm members
don't like it. Let's try writing it as -'NaN' instead; that seems
to produce the same result, at least on Intel hardware.
Per buildfarm.
Currently the pc files use hard coded paths for "includedir" and
"libdir."
Example:
Cflags: -I/usr/include
Libs: -L/usr/lib -lpq
This is not very fortunate when cross compiling inside a buildroot,
where the includes and libs are inside a staging directory, because
this introduces host paths into the build:
checking for pkg-config... /builder/shared-workdir/build/sdk/staging_dir/host/bin/pkg-config
checking for PostgreSQL libraries via pkg_config... -L/usr/lib <----
This commit addresses this by doing the following two things:
1. Instead of hard coding the paths in "Cflags" and "Libs"
"${includedir}" and "${libdir}" are used. Note: these variables
can be overriden on the pkg-config command line
("--define-variable=libdir=/some/path").
2. Add the variables "prefix" and "exec_prefix". If "includedir"
and/or "libdir" are using these then construct them accordingly.
This is done because buildroots (for instance OpenWrt) tend to
rename the real pkg-config and call it indirectly from a script
that sets "prefix", "exec_prefix" and "bindir", like so:
pkg-config.real --define-variable=prefix=${STAGING_PREFIX} \
--define-variable=exec_prefix=${STAGING_PREFIX} \
--define-variable=bindir=${STAGING_PREFIX}/bin $@
Example #1: user calls ./configure with "--libdir=/some/lib" and
"--includedir=/some/include":
prefix=/usr/local/pgsql
exec_prefix=${prefix}
libdir=/some/lib
includedir=/some/include
Name: libpq
Description: PostgreSQL libpq library
Url: http://www.postgresql.org/
Version: 12.1
Requires:
Requires.private:
Cflags: -I${includedir}
Libs: -L${libdir} -lpq
Libs.private: -lcrypt -lm
Example #2: user calls ./configure with no arguments:
prefix=/usr/local/pgsql
exec_prefix=${prefix}
libdir=${exec_prefix}/lib
includedir=${prefix}/include
Name: libpq
Description: PostgreSQL libpq library
Url: http://www.postgresql.org/
Version: 12.1
Requires:
Requires.private:
Cflags: -I${includedir}
Libs: -L${libdir} -lpq
Libs.private: -lcrypt -lm
Like this the paths can be forced into the staging directory when
using a buildroot setup:
checking for pkg-config... /home/sk/tmp/openwrt/staging_dir/host/bin/pkg-config
checking for PostgreSQL libraries via pkg_config... -L/home/sk/tmp/openwrt/staging_dir/target-mips_24kc_musl/usr/lib
Author: Sebastian Kemper <sebastian_ml@gmx.net>
Co-authored-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/20200305213827.GA25135%40darth.lan
We had a complaint that the postmaster fails to start if the invoking
program closes stdin. That happens because count_usable_fds expects
to be able to dup(0), and if it can't, we conclude there are no free
FDs and go belly-up. So far as I can find, though, there is no other
place in the server that touches stdin, and it's not unreasonable to
expect that a daemon wouldn't use that file.
As a simple improvement, let's dup FD 2 (stderr) instead. Unlike stdin,
it *is* reasonable for us to expect that stderr be open; even if we are
configured not to touch it, common libraries such as libc might try to
write error messages there.
Per gripe from Mario Emmenlauer. Given the lack of previous complaints,
I'm not excited about pushing this into stable branches, but it seems
OK to squeeze it into v14.
Discussion: https://postgr.es/m/48bafc63-c30f-3962-2ded-f2e985d93e86@emmenlauer.de
The IEEE 754 standard allows a wide variety of bit patterns for NaNs,
of which at least two ("NaN" and "-NaN") are pretty easy to produce
from SQL on most machines. This is problematic because our btree
comparison functions deem all NaNs to be equal, but our float hash
functions know nothing about NaNs and will happily produce varying
hash codes for them. That causes unexpected results from queries
that hash a column containing different NaN values. It could also
produce unexpected lookup failures when using a hash index on a
float column, i.e. "WHERE x = 'NaN'" will not find all the rows
it should.
To fix, special-case NaN in the float hash functions, not too much
unlike the existing special case that forces zero and minus zero
to hash the same. I arranged for the most vanilla sort of NaN
(that coming from the C99 NAN constant) to still have the same
hash code as before, to reduce the risk to existing hash indexes.
I dithered about whether to back-patch this into stable branches,
but ultimately decided to do so. It's a clear improvement for
queries that hash internally. If there is anybody who has -NaN
in a hash index, they'd be well advised to re-index after applying
this patch ... but the misbehavior if they don't will not be much
worse than the misbehavior they had before.
Per bug #17172 from Ma Liangzhu.
Discussion: https://postgr.es/m/17172-7505bea9e04e230f@postgresql.org
This commit allows pg_stat_reset_single_table_counters() to reset statistics
for a single relation shared across all databases in the cluster to zero.
Bump catalog version.
Author: B Sadhu Prasad Patro
Reviewed-by: Mahendra Singh Thalor, Himanshu Upadhyaya, Dilip Kumar, Fujii Masao
Discussion: https://postgr.es/m/CAFF0-CGy7EHeF=AqqkGMF85cySPQBgDcvNk73G2O0vL94O5U5A@mail.gmail.com
Use one fileset for the entire worker lifetime instead of using
separate filesets for each streaming transaction. Now, the
changes/subxacts files for every streaming transaction will be
created under the same fileset and the files will be deleted
after the transaction is completed.
This patch extends the BufFileOpenFileSet and BufFileDeleteFileSet
APIs to allow users to specify whether to give an error on missing
files.
Author: Dilip Kumar, based on suggestion by Thomas Munro
Reviewed-by: Hou Zhijie, Masahiko Sawada, Amit Kapila
Discussion: https://postgr.es/m/E1mCC6U-0004Ik-Fs@gemulon.postgresql.org
While populating the pgbench_accounts table, plain COPY was
unconditionally used. By changing it to COPY FREEZE, the time for
VACUUM is significantly reduced, thus the total time of "pgbench -i"
is also reduced. This only happens if pgbench runs against PostgreSQL
14 or later because COPY FREEZE in previous versions of PostgreSQL does
not bring the benefit. Also if partitioning is used, COPY FREEZE
cannot be used. In this case plain COPY will be used too.
Author: Tatsuo Ishii
Discussion: https://postgr.es/m/20210308.143907.2014279678657453983.t-ishii@gmail.com
Reviewed-by: Fabien COELHO, Laurenz Albe, Peter Geoghegan, Dean Rasheed
Until now, when defining extended statistics, everything except a plain
column reference was treated as complex expression. So for example "a"
was a column reference, but "(a)" would be an expression. In most cases
this does not matter much, but there were a couple strange consequences.
For example
CREATE STATISTICS s ON a FROM t;
would fail, because extended stats require at least two columns. But
CREATE STATISTICS s ON (a) FROM t;
would succeed, because that requirement does not apply to expressions.
Moreover, that statistics object is useless - the optimizer will always
use the regular statistics collected for attribute "a".
So do a bit more work to identify those expressions referencing a single
column, and translate them to a simple column reference. Backpatch to
14, where support for extended statistics on expressions was introduced.
Reported-by: Justin Pryzby
Backpatch-through: 14
Discussion: https://postgr.es/m/20210816013255.GS10479%40telsasoft.com
When -C/--connect option is specified, pgbench establishes and closes
the connection for each transaction. In this case pgbench needs to
measure the times taken for all those connections and disconnections,
to include the average connection time in the benchmark result.
But previously pgbench could not measure those disconnection delays.
To fix the bug, this commit makes pgbench measure the disconnection
delays whenever the connection is closed at the end of transaction,
if -C/--connect option is specified.
Back-patch to v14. Per discussion, we concluded not to back-patch to v13
or before because changing that behavior in stable branches would
surprise users rather than providing benefits.
Author: Yugo Nagata
Reviewed-by: Fabien COELHO, Tatsuo Ishii, Asif Rehman, Fujii Masao
Discussion: https://postgr.es/m/20210614151155.a393bc7d8fed183e38c9f52a@sraoss.co.jp
The check to test whether the subscription workers were restarting after a
change in the subscription was failing. The reason was that the test was
assuming the walsender started before it reaches the 'streaming' state and
the walsender was exiting due to an error before that. Now, the walsender
was erroring out before reaching the 'streaming' state because it tries to
acquire the slot before the previous walsender has exited.
In passing, improve the die messages so that it is easier to investigate
the failures in the future if any.
Reported-by: Michael Paquier, as per buildfarm
Author: Ajin Cherian
Reviewed-by: Masahiko Sawada, Amit Kapila
Backpatch-through: 10, where this test was introduced
Discussion: https://postgr.es/m/YRnhFxa9bo73wfpV@paquier.xyz
It doesn't make any sense to report this information, since VACUUM
VERBOSE reports on heap relation truncation directly. This was an
oversight in commit 7ab96cf6, which made VACUUM VERBOSE output a little
more consistent with nearby autovacuum-specific log output. Adjust
comments that describe how this is supposed to work in passing.
Also bring truncation-related VACUUM VERBOSE output in line with the
convention established for VACUUM VERBOSE output by commit f4f4a649.
Author: Peter Geoghegan <pg@bowt.ie>
Backpatch: 14-, where VACUUM VERBOSE's output changed.
unpack_sql_state() has been introduced in d46bc44 to refactor the
unpacking of a SQLSTATE into a string, but it forgot one code path when
sending error reports to clients that could make use of it. This
changes the code to also use unpack_sql_state() there, simplifying a bit
the code.
Author: Peter Smith
Discussion: https://postgr.es/m/CAHut+PuYituuD1-VVZUNcmCQuc3ZzZMPoO57POgm8tnXOkwJAA@mail.gmail.com
This is useful to test for a command failure with some default
connection parameters associated to a node, in combination with checks
on error patterns expected. This routine will be used by an upcoming
future patch, but could be also plugged into some of the existing
tests.
Extracted from a larger patch by the same author.
Author: Ronan Dunklau
Discussion: https://postgr.es/m/5742739.ga3mSNWIix@aivenronan
The code printing expressions for extended statistics doubled the
parens, producing results like ((a+1)), which is unnecessary and not
consistent with how we print expressions elsewhere.
Fixed by tweaking the code to produce just a single set of parens.
Reported by Mark Dilger, fix by me. Backpatch to 14, where support for
extended statistics on expressions was added.
Reported-by: Mark Dilger
Discussion: https://postgr.es/m/20210122040101.GF27167%40telsasoft.com
The field hasn't been used since commit 3d351d91, which redefined
pg_class.reltuples to be -1 before the first VACUUM or ANALYZE.
Also rename a local variable of the same name ("old_rel_pages"). This is
used by relation truncation to represent the original relation size at
the start of the ongoing VACUUM operation. Rename it to orig_rel_pages,
since that's a lot clearer. (This name matches similar nearby code.)
For no particularly good reason, getPolicies() queried pg_policy
separately for each table. We can collect all the policies in
a single query instead, and attach them to the correct TableInfo
objects using findTableByOid() lookups. On the regression
database, this reduces the number of queries substantially, and
provides a visible savings even when running against a local
server.
Per complaint from Hubert Depesz Lubaczewski. Since this is such
a simple fix and can have a visible performance benefit, back-patch
to all supported branches.
Discussion: https://postgr.es/m/20210826084430.GA26282@depesz.com
There's long been a "TODO: there might be some value in caching
the results" annotation on pg_dump's getFormattedTypeName function;
but we hadn't gotten around to checking what it was costing us to
repetitively look up type names. It turns out that when dumping the
current regression database, about 10% of the total number of queries
issued are duplicative format_type() queries. However, Hubert Depesz
Lubaczewski reported a not-unusual case where these account for over
half of the queries issued by pg_dump. Individually these queries
aren't expensive, but when network lag is a factor, they add up to a
problem. We can very easily add some caching to getFormattedTypeName
to solve it.
Since this is such a simple fix and can have a visible performance
benefit, back-patch to all supported branches.
Discussion: https://postgr.es/m/20210826084430.GA26282@depesz.com
Commit 5be8ce82e8 added a new role to the stats_ext regression suite,
but the role name did not start with regress_ causing failures when
running with ENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS. Fixed by
renaming the role to start with the expected regress_ prefix.
Backpatch-through: 10, same as the new regression test
Discussion: https://postgr.es/m/1F238937-7CC2-4703-A1B1-6DC225B8978A%40enterprisedb.com
When an ownership check on extended statistics object failed, the code
was calling aclcheck_error_type to report the failure, which is clearly
wrong, resulting in cache lookup errors. Fix by calling aclcheck_error.
This issue exists since the introduction of extended statistics, so
backpatch all the way back to PostgreSQL 10. It went unnoticed because
there were no tests triggering the error, so add one.
Reported-by: Mark Dilger
Backpatch-through: 10, where extended stats were introduced
Discussion: https://postgr.es/m/1F238937-7CC2-4703-A1B1-6DC225B8978A%40enterprisedb.com
When starting to use a query parsetree loaded from the catalogs,
we must begin by applying AcquireRewriteLocks(), to obtain the same
relation locks that the parser would have gotten if the query were
entered interactively, and to do some other cleanup such as dealing
with later-dropped columns. New-style SQL functions are just as
subject to this rule as other stored parsetrees; however, of the
places dealing with such functions, only init_sql_fcache had gotten
the memo. In particular, if we successfully inlined a new-style
set-returning SQL function that contained any relation references,
we'd either get an assertion failure or attempt to use those
relation(s) sans locks.
I also added AcquireRewriteLocks calls to fmgr_sql_validator and
print_function_sqlbody. Desultory experiments didn't demonstrate any
failures in those, but I suspect that I just didn't try hard enough.
Certainly we don't expect nearby code paths to operate without locks.
On the same logic of it-ought-to-have-the-same-effects-as-the-old-code,
call pg_rewrite_query() in fmgr_sql_validator, too. It's possible
that neither code path there needs to bother with rewriting, but
doing the analysis to prove that is beyond my goals for today.
Per bug #17161 from Alexander Lakhin.
Discussion: https://postgr.es/m/17161-048a1cdff8422800@postgresql.org
map and grep are not intended to be used as mutators, iterating
with side-effects should be done with for or foreach loops. This
fixes the one occurrence of the pattern, and bumps the perlcritic
policy to severity 5 for the map and grep policies.
Author: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://postgr.es/m/87fsvzhhc4.fsf@wibble.ilmari.org
0c013e0 has done a large refactoring to unify all the code paths using
replication commands, but forgot one code path doing WAL streaming that
checks the validity of a cluster connecting to with IDENTIFY_SYSTEM.
There is a generic routine able to handle that, so make use of it in
this code path. This impacts pg_receivewal and pg_basebackup.
Author: Bharath Rupireddy
Discussion: https://postgr.es/m/CALj2ACVKKYUMC8GE72Y7BP9g1batrrq3sEwUh+1_i2krWZC_2Q@mail.gmail.com
Most data-corruption reports mention the location of the problem, but
this one failed to. Add it.
Backpatch all the way back. In 12 and older, also assign the
ERRCODE_DATA_CORRUPTED error code as was done in commit fd6ec93bf8 for
13 and later.
Discussion: https://postgr.es/m/202108191637.oqyzrdtnheir@alvherre.pgsql
Per our message style guidelines, for human consumption we quote
qualified names as a whole rather than each part separately; but commits
bc085205c8 introduced a deviation for extended statistics and
a4d75c86bf copied it. I don't agree with this policy applying to
names shown by psql, but that's a poor reason to deviate from the
practice only in two obscure corners, so make said corners use the same
style as everywhere else.
Backpatch to 14. The first of these is older, but I'm not sure we want
to destabilize the psql output in the older branches for such a small
thing.
Discussion: https://postgr.es/m/20210828181618.GS26465@telsasoft.com
Commit 547f04e734 changed pgbench so that it used the measurement result
of connection delays in its benchmark report only when -C/--connect option
is specified. But previously those delays were unnecessarily measured
even when that option is not specified. Which was a waste of cycles.
This commit improves pgbench so that it avoids such unnecessary measurement.
Back-patch to v14 where commit 547f04e734 first appeared.
Author: Yugo Nagata
Reviewed-by: Fabien COELHO, Asif Rehman, Fujii Masao
Discussion: https://postgr.es/m/20210614151155.a393bc7d8fed183e38c9f52a@sraoss.co.jp
Move fileset related implementation out of sharedfileset.c to allow its
usage by backends that don't want to share filesets among different
processes. After this split, fileset infrastructure is used by both
sharedfileset.c and worker.c for the named temporary files that survive
across transactions.
Author: Dilip Kumar, based on suggestion by Andres Freund
Reviewed-by: Hou Zhijie, Masahiko Sawada, Amit Kapila
Discussion: https://postgr.es/m/E1mCC6U-0004Ik-Fs@gemulon.postgresql.org
This includes the detection of new patterns for various constraint
types, with the addition of USING INDEX for unique indexes of a table
on primary keys and unique constraints.
Author: Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/87bl6ehhpl.fsf@wibble.ilmari.org
I wrote this while thinking about a possible optimization, but it's
a useful description of the existing code regardless of whether the
optimization ever happens. So push it separately.
In the long-going saga for analyze on partitioned tables, one thing I
missed while reverting 0827e8af70 is the maintenance of analyze count
and last analyze time for partitioned tables. This is a mostly trivial
change that enables users assess the need for invoking manual ANALYZE on
partitioned tables.
This patch, posted by Justin and modified a bit by me (Álvaro), can be
mostly traced back to Hosoya-san, though any problems introduced with
the scissors are mine.
Backpatch to 14, in line with 6f8127b739.
Co-authored-by: Yuzuko Hosoya <yuzukohosoya@gmail.com>
Co-authored-by: Justin Pryzby <pryzby@telsasoft.com>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20210816222810.GE10479@telsasoft.com
Déjà vu of commit fc40ba1296, for another backslash command.
Strictly speaking this isn't a bug, but since all references to catalog
objects are schema-qualified, we might as well be consistent. The
omission first appeared in commit ad600bba04 and replicated in
a4d75c86bf15; backpatch to 14.
Author: Justin Pryzby <pryzbyj@telsasoft.com>
Discussion: https://postgr.es/m/20210827193151.GN26465@telsasoft.com
Strictly speaking this isn't a bug, but since all references to catalog
objects are schema-qualified, we might as well be consistent. The
omission first appeared in commit 1c5d9270e3, so backpatch to 12.
Author: Justin Pryzby <pryzbyj@telsasoft.com>
Discussion: https://postgr.es/m/20210827193151.GN26465@telsasoft.com
If the system crashed between CREATE TABLESPACE and the next checkpoint,
the result could be some files in the tablespace unexpectedly containing
no rows. Affected files would be those for which the system did not
write WAL; see the wal_skip_threshold documentation. Before v13, a
different set of conditions governed the writing of WAL; see v12's
<sect2 id="populate-pitr">. (The v12 conditions were broader in some
ways and narrower in others.) Users may want to audit non-default
tablespaces for unexpected short files. The bug could have truncated an
index without affecting the associated table, and reindexing the index
would fix that particular problem.
This fixes the bug by making create_tablespace_directories() more like
TablespaceCreateDbspace(). create_tablespace_directories() was
recursively removing tablespace contents, reasoning that WAL redo would
recreate everything removed that way. That assumption holds for other
wal_level values. Under wal_level=minimal, the old approach could
delete files for which no other copy existed. Back-patch to 9.6 (all
supported versions).
Reviewed by Robert Haas and Prabhat Sahu. Reported by Robert Haas.
Discussion: https://postgr.es/m/CA+TgmoaLO9ncuwvr2nN-J4VEP5XyAcy=zKiHxQzBbFRxxGxm0w@mail.gmail.com
Somehow, spgist overlooked the need to call pgstat_count_index_scan().
Hence, pg_stat_all_indexes.idx_scan and equivalent columns never
became nonzero for an SP-GiST index, although the related per-tuple
counters worked fine.
This fix works a bit differently from other index AMs, in that the
counter increment occurs in spgrescan not spggettuple/spggetbitmap.
It looks like this won't make the user-visible semantics noticeably
different, so I won't go to the trouble of introducing an is-this-
the-first-call flag just to make the counter bumps happen in the
same places.
Per bug #17163 from Christian Quest. Back-patch to all supported
versions.
Discussion: https://postgr.es/m/17163-b8c5cc88322a5e92@postgresql.org
When prefetching pages for ANALYZE, we should be using
maintenance_io_concurrenty (by calling
get_tablespace_maintenance_io_concurrency(), not
get_tablespace_io_concurrency()).
ANALYZE prefetching was introduced in c6fc50c, so back-patch to 14.
Backpatch-through: 14
Reported-By: Egor Rogov
Discussion: https://postgr.es/m/9beada99-34ce-8c95-fadb-451768d08c64%40postgrespro.ru
Adjust track_io_timing related logging code added by commit 94d13d474d.
Make it consistent with other nearby autovacuum and autoanalyze logging
code by removing logic that suppressed zero millisecond outputs.
log_autovacuum_min_duration log output now reliably shows "read:" and
"write:" millisecond-based values in its report (when track_io_timing is
enabled).
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Stephen Frost <sfrost@snowman.net>
Discussion: https://postgr.es/m/CAH2-WznW0FNxSVQMSRazAMYNfZ6DR_gr5WE78hc6E1CBkkJpzw@mail.gmail.com
Backpatch: 14-, where the track_io_timing logging was introduced.
This order seems more natural. It starts with details that are
particular to heap and index data structures, and ends with system-level
costs incurred during the autovacuum worker's VACUUM/ANALYZE operation.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WzkzxK6ahA9xxsOftRtBX_R0swuHZsvo4QUbak1Bz7hb7Q@mail.gmail.com
Backpatch: 14-, which enhanced the log output in various ways.
This was arguably a minor oversight in commit b4af70cb, which cleaned up
the function signatures of functions that modify IndexBulkDeleteResult
variables.
Second thoughts about commit 824bf7190: we apply makesearch() to
an NFA after having determined whether it is a MATCHALL pattern.
Prepending ".*" doesn't make it non-MATCHALL, but it does change the
maximum possible match length, and makesearch() failed to update that.
This has no ill effects given the stylized usage of search NFAs, but
it seems like it's better to keep the data structure consistent. In
particular, fixing this allows more honest handling of the MATCHALL
check in matchuntil(): we can now assert that maxmatchall is infinity,
instead of lamely assuming that it should act that way.
In passing, improve the code in dump[c]nfa so that infinite maxmatchall
is printed as "inf" not a magic number.
When looping over the resultset from a SQL query, extracting the field
number before the loop body to avoid repeated calls to PQfnumber is an
established pattern. On very wide tables this can have a performance
impact, but it wont be noticeable in the common case. This fixes a few
queries which were extracting the field number in the loop body.
Author: Hou Zhijie <houzj.fnst@fujitsu.com>
Reviewed-by: Nathan Bossart <bossartn@amazon.com>
Discussion: https://postgr.es/m/OS0PR01MB57164C392783F29F6D0ECA0B94139@OS0PR01MB5716.jpnprd01.prod.outlook.com
Previously, on the subscriber, we set the error context callback for the
tuple data conversion failures. This commit replaces the existing error
context callback with a comprehensive one so that it shows not only the
details of data conversion failures but also the details of logical change
being applied by the apply worker or table sync worker. The additional
information displayed will be the command, transaction id, and timestamp.
The error context is added to an error only when applying a change but not
while doing other work like receiving data etc.
This will help users in diagnosing the problems that occur during logical
replication. It also can be used for future work that allows skipping a
particular transaction on the subscriber.
Author: Masahiko Sawada
Reviewed-by: Hou Zhijie, Greg Nancarrow, Haiying Tang, Amit Kapila
Tested-by: Haiying Tang
Discussion: https://postgr.es/m/CAD21AoDeScrsHhLyEPYqN3sydg6PxAPVBboK=30xJfUVihNZDA@mail.gmail.com
The hardcoded "wide character" set in ucs_wcwidth() was last updated
around the Unicode 5.0 era. This led to misalignment when printing
emojis and other codepoints that have since been designated
wide or full-width.
To fix and keep up to date, extend update-unicode to download the list
of wide and full-width codepoints from the offical sources.
In passing, remove some comments about non-spacing characters that
haven't been accurate since we removed the former hardcoded logic.
Jacob Champion
Reported and reviewed by Pavel Stehule
Discussion: https://www.postgresql.org/message-id/flat/CAFj8pRCeX21O69YHxmykYySYyprZAqrKWWg0KoGKdjgqcGyygg@mail.gmail.com
Since a partitioned index doesn't have storage, getting the number of
blocks from it will not give sensible results. Existing callers
already check that they don't call it that way, so there doesn't
appear to be a live problem. But for correctness, handle
RELKIND_PARTITIONED_INDEX together with the other non-storage
relkinds.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://www.postgresql.org/message-id/1d3a5fbe-f48b-8bea-80da-9a5c4244aef9@enterprisedb.com
Pengchengliu reported an assertion failure in a parallel woker while
performing a parallel scan using an overflowed snapshot. The proximate
cause is that TransactionXmin was set to an incorrect value. The
underlying cause is incorrect snapshot handling in parallel.c.
In particular, InitializeParallelDSM() was unconditionally calling
GetTransactionSnapshot(), because I (rhaas) mistakenly thought that
was always retrieving an existing snapshot whereas, at isolation
levels less than REPEATABLE READ, it's actually taking a new one. So
instead do this only at higher isolation levels where there actually
is a single snapshot for the whole transaction.
By itself, this is not a sufficient fix, because we still need to
guarantee that TransactionXmin gets set properly in the workers. The
easiest way to do that seems to be to install the leader's active
snapshot as the transaction snapshot if the leader did not serialize a
transaction snapshot. This doesn't affect the results of future
GetTrasnactionSnapshot() calls since those have to take a new snapshot
anyway; what we care about is the side effect of setting TransactionXmin.
Report by Pengchengliu. Patch by Greg Nancarrow, except for some comment
text which I supplied.
Discussion: https://postgr.es/m/002f01d748ac$eaa781a0$bff684e0$@tju.edu.cn
The previous coding relied on the PID file appearing and the query
starting "fast enough", which can fail on slow machines. Also, there
might have been an undocumented interference between alarm and
IPC::Run. This new coding doesn't rely on any of these concurrency
mechanisms. Instead, we wait unitl the PID file is complete before
proceeding, and then also wait until the sleep query is registered by
the server.
Discussion: https://www.postgresql.org/message-id/flat/E1mH14Q-0002gh-HS%40gemulon.postgresql.org
Commit 325f2ec555 introduced pg_class.relwrite to skip operations on
tables created as part of a heap rewrite during DDL. It links such
transient heaps to the original relation OID via this new field in
pg_class but forgot to do anything about toast tables. So, logical
decoding was not able to skip operations on internally created toast
tables. This leads to an error when we tried to decode the WAL for the
next operation for which it appeared that there is a toast data where
actually it didn't have any toast data.
To fix this, we set pg_class.relwrite for internally created toast tables
as well which allowed skipping operations on them during logical decoding.
Author: Bertrand Drouvot
Reviewed-by: David Zhang, Amit Kapila
Backpatch-through: 11, where it was introduced
Discussion: https://postgr.es/m/b5146fb1-ad9e-7d6e-f980-98ed68744a7c@amazon.com
There are two identical error messages about valid value of modulus for
hash partition, in PostgreSQL source code. Commit 0e1275fb07 improved
only one of them so that ambiguous word "positive" was avoided there,
and forgot to improve the other. This commit improves the other.
Which would reduce translator burden.
Back-pach to v11 where the error message exists.
Author: Kyotaro Horiguchi
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/20210819.170315.1413060634876301811.horikyota.ntt@gmail.com
The distance in phrase operator must be an integer value between zero
and MAXENTRYPOS inclusive. But previously the error message about
its valid value included the information about its upper limit
but not lower limit (i.e., zero). This commit improves the error message
so that it also includes the information about its lower limit.
Back-patch to v9.6 where full-text phrase search was supported.
Author: Kyotaro Horiguchi
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/20210819.170315.1413060634876301811.horikyota.ntt@gmail.com
Regexps like "(.){0}...\1" drew an "invalid backreference number".
That's not unreasonable on its face, since the capture group will
never be matched if it's iterated zero times. However, other engines
such as Perl's don't complain about this, nor do we throw an error for
related cases such as "(.)|\1", even though that backref can never
succeed either. Also, if the zero-iterations case happens at runtime
rather than compile time --- say, "(x)*...\1" when there's no "x" to
be found --- that's not an error, we just deem the backref to not
match. Making this even less defensible, no error was thrown for
nested cases such as "((.)){0}...\2"; and to add insult to injury,
those cases could result in assertion failures instead. (It seems
that nothing especially bad happened in non-assert builds, though.)
Let's just fix it so that no error is thrown and instead the backref
is deemed to never match, so that compile-time detection of no
iterations behaves the same as run-time detection.
Per report from Mark Dilger. This appears to be an aboriginal error
in Spencer's library, so back-patch to all supported versions.
Pre-v14, it turns out to also be necessary to back-patch one aspect of
commits cb76fbd7e/00116dee5, namely to create capture-node subREs with
the begin/end states of their subexpressions, not the current lp/rp
of the outer parseqatom invocation. Otherwise delsub complains that
we're trying to disconnect a state from itself. This is a bit scary
but code examination shows that it's safe: in the pre-v14 code, if we
want to wrap iteration around the subexpression, the first thing we do
is overwrite the atom's begin/end fields with new states. So the
bogus values didn't survive long enough to be used for anything, except
if no iteration is required, in which case it doesn't matter.
Discussion: https://postgr.es/m/A099E4A8-4377-4C64-A98C-3DEDDC075502@enterprisedb.com
The current refresh behavior tries to just refresh added/dropped
publications but that leads to removing wrong tables from subscription. We
can't refresh just the dropped publication because it is quite possible
that some of the tables are removed from publication by that time and now
those will remain as part of the subscription. Also, there is a chance
that the tables that were part of the publication being dropped are also
part of another publication, so we can't remove those.
So, we decided that by default, add/drop commands will also act like
REFRESH PUBLICATION which means they will refresh all the publications. We
can keep the old behavior for "add publication" but it is better to be
consistent with "drop publication".
Author: Hou Zhijie
Reviewed-by: Masahiko Sawada, Amit Kapila
Backpatch-through: 14, where it was introduced
Discussion: https://postgr.es/m/OS0PR01MB5716935D4C2CC85A6143073F94EF9@OS0PR01MB5716.jpnprd01.prod.outlook.com
The recursion in cdissect() was careless about clearing match data
for capturing parentheses after rejecting a partial match. This
could allow a later back-reference to succeed when by rights it
should fail for lack of a defined referent.
To fix, think a little more rigorously about what the contract
between different levels of cdissect's recursion needs to be.
With the right spec, we can fix this using fewer rather than more
resets of the match data; the key decision being that a failed
sub-match is now explicitly responsible for clearing any matches
it may have set.
There are enough other cross-checks and optimizations in the code
that it's not especially easy to exhibit this problem; usually, the
match will fail as-expected. Plus, regexps that are even potentially
vulnerable are most likely user errors, since there's just not much
point in writing a back-ref that doesn't always have a referent.
These facts perhaps explain why the issue hasn't been detected,
even though it's almost certainly a couple of decades old.
Discussion: https://postgr.es/m/151435.1629733387@sss.pgh.pa.us
WAL records may span multiple segments, but XLogWrite() does not
wait for the entire record to be written out to disk before
creating archive status files. Instead, as soon as the last WAL page of
the segment is written, the archive status file is created, and the
archiver may process it. If PostgreSQL crashes before it is able to
write and flush the rest of the record (in the next WAL segment), the
wrong version of the first segment file lingers in the archive, which
causes operations such as point-in-time restores to fail.
To fix this, keep track of records that span across segments and ensure
that segments are only marked ready-for-archival once such records have
been completely written to disk.
This has always been wrong, so backpatch all the way back.
Author: Nathan Bossart <bossartn@amazon.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Ryo Matsumura <matsumura.ryo@fujitsu.com>
Reviewed-by: Andrey Borodin <x4mmm@yandex-team.ru>
Discussion: https://postgr.es/m/CBDDFA01-6E40-46BB-9F98-9340F4379505@amazon.com
In a backup manifest, WAL-Ranges stores the range of WAL that is
required for the backup to be valid. pg_verifybackup would then
internally use pg_waldump for the checks based on this data.
When the timeline where the backup started was more than 1 with a
history file looked at for the manifest data generation, the calculation
of the WAL range for the first timeline to check was incorrect. The
previous logic used as start LSN the start position of the first
timeline, but it needs to use the start LSN of the backup. This would
cause failures with pg_verifybackup, or any tools making use of the
backup manifests.
This commit adds a test based on a logic using a self-promoted node,
making it rather cheap.
Author: Kyotaro Horiguchi
Discussion: https://postgr.es/m/20210818.143031.1867083699202617521.horikyota.ntt@gmail.com
Backpatch-through: 13
We've supported parallel aggregation since e06a38965. At the time, we
didn't quite get around to also adding parallel DISTINCT. So, let's do
that now.
This is implemented by introducing a two-phase DISTINCT. Phase 1 is
performed on parallel workers, rows are made distinct there either by
hashing or by sort/unique. The results from the parallel workers are
combined and the final distinct phase is performed serially to get rid of
any duplicate rows that appear due to combining rows for each of the
parallel workers.
Author: David Rowley
Reviewed-by: Zhihong Yu
Discussion: https://postgr.es/m/CAApHDvrjRxVKwQN0he79xS+9wyotFXL=RmoWqGGO2N45Farpgw@mail.gmail.com
Improve two places in plpgsql, and one in spi.c, where an error
message would confusingly tell you that you couldn't use a SELECT
query, when what you had written *was* a SELECT query. The actual
problem is that you can't use SELECT ... INTO in these contexts,
but the messages failed to make that apparent. Special-case
SELECT INTO to make these errors more helpful.
Also, fix the same spots in plpgsql, as well as several messages
in exec_eval_expr(), to not quote the entire complained-of query or
expression in the primary error message. That behavior very easily
led to violating our message style guideline about keeping the primary
error message short and single-line. Also, since the important part
of the message was after the inserted text, it could make the real
problem very hard to see. We can report the query or expression as
the first line of errcontext instead.
Per complaint from Roger Mason. Back-patch to v14, since (a) some
of these messages are new in v14 and (b) v14's translatable strings
are still somewhat in flux. The problem's older than that of
course, but I'm hesitant to change the behavior further back.
Discussion: https://postgr.es/m/1914708.1629474624@sss.pgh.pa.us
After detecting a sub-match "dissect" failure (i.e., a backref match
failure) in the i'th sub-match of an iteration node, we should proceed
by adjusting the attempted length of the i'th submatch. As coded,
though, these functions changed the attempted length of the *last*
sub-match, and only after exhausting all possibilities for that would
they back up to adjust the next-to-last sub-match, and then the
second-from-last, etc; all of which is wasted effort, since only
changing the start or length of the i'th sub-match can possibly make
it succeed. This oversight creates the possibility for exponentially
bad performance. Fortunately the problem is masked in most cases by
optimizations or constraints applied elsewhere; which explains why
we'd not noticed it before. But it is possible to reach the problem
with fairly simple, if contrived, regexps.
Oversight in my commit 173e29aa5. That's pretty ancient now,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/1808998.1629412269@sss.pgh.pa.us
Using --quiet in combination with --no-strict-names didn't work as
documented, a warning message was still emitted. Since the --quiet
flag was working in an unconventional way to other utilities, fix
by removing the functionality instead.
Backpatch through 14 where pg_amcheck was introduced.
Bug: 17148
Reported-by: Chen Jiaoqian <chenjq.jy@fujitsu.com>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://postgr.es/m/17148-b5087318e2b04fc6@postgresql.org
Backpatch-through: 14
transformLockingClause neglected to exclude the pseudo-RTEs for
OLD/NEW when processing a rule's query. This led to odd errors
or even crashes later on. This bug is very ancient, but it's
not terribly surprising that nobody noticed, since the use-case
for SELECT FOR UPDATE in a non-view rule is somewhere between
thin and non-existent. Still, crashing is not OK.
Per bug #17151 from Zhiyong Wu. Thanks to Masahiko Sawada
for analysis of the problem.
Discussion: https://postgr.es/m/17151-c03a3e6e4ec9aadb@postgresql.org
Previously log messages late during shutdown could end up using either another
backend's PgBackendStatus (multi user) or segfault (single user) because
pgstat_get_my_query_id()'s check for !MyBEEntry didn't filter out use after
pgstat_beshutdown_hook().
This became a bug in 4f0b0966c8, but was a bit fishy before. But given
there's no known problematic cases before 14, it doesn't seem worth
backpatching further.
Also fixes a wrong filename in a comment, introduced in e1025044.
Reported-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://postgr.es/m/Julien Rouhaud <rjuju123@gmail.com>
Backpatch: 14-
In the code, most places used the term "Stream Stop" for the logical
stream message. This commit improves consistency by renaming LogicalRepMsgType
"LOGICAL_REP_MSG_STREAM_END" to "LOGICAL_REP_MSG_STREAM_STOP".
Author: Masahiko Sawada
Reviewed-by: Hou Zhijie, Amit Kapila
Discussion: https://postgr.es/m/CAD21AoDeScrsHhLyEPYqN3sydg6PxAPVBboK=30xJfUVihNZDA@mail.gmail.com
This is a combined revert of the following commits:
- c3826f8, a refactoring piece that moved the hex decoding code to
src/common/. This code was cleaned up by aef8948, as it originally
included no overflow checks in the same way as the base64 routines in
src/common/ used by SCRAM, making it unsafe for its purpose.
- aef8948, a more advanced refactoring of the hex encoding/decoding code
to src/common/ that added sanity checks on the result buffer for hex
decoding and encoding. As reported by Hans Buschmann, those overflow
checks are expensive, and it is possible to see a performance drop in
the decoding/encoding of bytea or LOs the longer they are. Simple SQLs
working on large bytea values show a clear difference in perf profile.
- ccf4e27, a cleanup made possible by aef8948.
The reverts of all those commits bring back the performance of hex
decoding and encoding back to what it was in ~13. Fow now and
post-beta3, this is the simplest option.
Reported-by: Hans Buschmann
Discussion: https://postgr.es/m/1629039545467.80333@nidsa.net
Backpatch-through: 14
Recursion into the FILTER clause was mis-implemented, such that a
relevant Var or Aggref at the very top of the FILTER clause would
be ignored. (Of course, that'd have to be a plain boolean Var or
boolean-returning aggregate.) The consequence would be
mis-identification of the correct semantic level of the aggregate,
which could lead to not-per-spec query behavior. If the FILTER
expression is an aggregate, this could also lead to failure to issue
an expected "aggregate function calls cannot be nested" error, which
would likely result in a core dump later on, since the planner and
executor aren't expecting such cases to appear.
The root cause is that commit b560ec1b0 blindly copied some code
that assumed it's recursing into a List, and thus didn't examine the
top-level node. To forestall questions about why this call doesn't
look like the others, as well as possible future copy-and-paste
mistakes, let's change all three check_agg_arguments_walker calls in
check_agg_arguments, even though only the one for the filter clause
is really broken.
Per bug #17152 from Zhiyong Wu. This has been wrong since we
implemented FILTER, so back-patch to all supported versions.
(Testing suggests that pre-v11 branches manage to avoid crashing
in the bad-Aggref case, thanks to "redundant" checks in ExecInitAgg.
But I'm not sure how thorough that protection is, and anyway the
wrong-behavior issue remains, so fix 9.6 and 10 too.)
Discussion: https://postgr.es/m/17152-c7f906cc1a88e61b@postgresql.org
The skip options set for all-visible and all-frozen were incorrect
as they used space rather than hyphen, causing a syntax error when
invoked. Also, the option for not skipping any pages at all, none,
was documented but not implemented.
Backpatch through 14 where pg_amcheck was introduced.
Bug: #17149
Reported-by: Chen Jiaoqian <chenjq.jy@fujitsu.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/17149-5918ea748da36b15@postgresql.org
Backpatch-through: 14
If recordDependencyOnCurrentExtension is invoked on a pre-existing,
free-standing object during an extension update script, that object
will become owned by the extension. In our current code this is
possible in three cases:
* Replacing a "shell" type or operator.
* CREATE OR REPLACE overwriting an existing object.
* ALTER TYPE SET, ALTER DOMAIN SET, and ALTER OPERATOR SET.
The first of these cases is intentional behavior, as noted by the
existing comments for GenerateTypeDependencies. It seems like
appropriate behavior for CREATE OR REPLACE too; at least, the obvious
alternatives are not better. However, the fact that it happens during
ALTER is an artifact of trying to share code (GenerateTypeDependencies
and makeOperatorDependencies) between the CREATE and ALTER cases.
Since an extension script would be unlikely to ALTER an object that
didn't already belong to the extension, this behavior is not very
troubling for the direct target object ... but ALTER TYPE SET will
recurse to dependent domains, and it is very uncool for those to
become owned by the extension if they were not already.
Let's fix this by redefining the ALTER cases to never change extension
membership, full stop. We could minimize the behavioral change by
only changing the behavior when ALTER TYPE SET is recursing to a
domain, but that would complicate the code and it does not seem like
a better definition.
Per bug #17144 from Alex Kozhemyakin. Back-patch to v13 where ALTER
TYPE SET was added. (The other cases are older, but since they only
affect the directly-named object, there's not enough of a problem to
justify changing the behavior further back.)
Discussion: https://postgr.es/m/17144-e67d7a8f049de9af@postgresql.org
I was overoptimistic to assume that UTF8-based locales would all
consider U+1500 to be a member of the [[:alpha:]] char class.
Tweak the test cases added by commit 78a843f11 to avoid that
assumption. We might need to lobotomize them further, but this
should be enough to fix the early buildfarm reports.
The functions moveins(), copyins(), moveouts(), copyouts() are
required to preserve the invariant that there are no duplicate arcs in
the regex's NFA. Spencer's original implementation of them was O(N^2)
since it checked separately for a match to each source arc. In commit
579840ca0 I improved that by adding sort/merge logic to be used if
more than a few arcs are to be moved/copied. However, I now realize
that that missed a bet. At many call sites, the target state is newly
made and cannot have any existing in-arcs (respectively out-arcs)
that could be duplicates. So spending any cycles at all on checking
for duplicates is wasted effort; in these cases we can just blindly
move/copy all the source arcs. Add code paths to do that.
It turns out that for copyins()/copyouts(), *all* the call sites have
this property, making all the "improved" logic in them flat out
unreachable. Perhaps we'll need the full capability again someday,
so I just #ifdef'd those paths out rather than removing them entirely.
In passing, add a few test cases to improve code coverage in this
area as well as in regc_locale.c/regc_pg_locale.c.
Discussion: https://postgr.es/m/810272.1629064063@sss.pgh.pa.us
In OpenSSL there are two types of BIO's (I/O abstractions):
source/sink and filters. A source/sink BIO is a source and/or
sink of data, ie one acting on a socket or a file. A filter
BIO takes a stream of input from another BIO and transforms it.
In order for BIO_find_type() to be able to traverse the chain
of BIO's and correctly find all BIO's of a certain type they
shall have the type bit set accordingly, source/sink BIO's
(what PostgreSQL implements) use BIO_TYPE_SOURCE_SINK and
filter BIO's use BIO_TYPE_FILTER. In addition to these, file
descriptor based BIO's should have the descriptor bit set,
BIO_TYPE_DESCRIPTOR.
The PostgreSQL implementation didn't set the type bits, which
went unnoticed for a long time as it's only really relevant
for code auditing the OpenSSL installation, or doing similar
tasks. It is required by the API though, so this fixes it.
Backpatch through 9.6 as this has been wrong for a long time.
Author: Itamar Gafni
Discussion: https://postgr.es/m/SN6PR06MB39665EC10C34BB20956AE4578AF39@SN6PR06MB3966.namprd06.prod.outlook.com
Backpatch-through: 9.6
This reverts the following commits:
1b5617eb84 Describe (auto-)analyze behavior for partitioned tables
0e69f705cc Set pg_class.reltuples for partitioned tables
41badeaba8 Document ANALYZE storage parameters for partitioned tables
0827e8af70 autovacuum: handle analyze for partitioned tables
There are efficiency issues in this code when handling databases with
large numbers of partitions, and it doesn't look like there isn't any
trivial way to handle those. There are some other issues as well. It's
now too late in the cycle for nontrivial fixes, so we'll have to let
Postgres 14 users continue to manually deal with ANALYZE their
partitioned tables, and hopefully we can fix the issues for Postgres 15.
I kept [most of] be280cdad2 ("Don't reset relhasindex for partitioned
tables on ANALYZE") because while we added it due to 0827e8af70, it is
a good bugfix in its own right, since it affects manual analyze as well
as autovacuum-induced analyze, and there's no reason to revert it.
I retained the addition of relkind 'p' to tables included by
pg_stat_user_tables, because reverting that would require a catversion
bump.
Also, in pg14 only, I keep a struct member that was added to
PgStat_TabStatEntry to avoid breaking compatibility with existing stat
files.
Backpatch to 14.
Discussion: https://postgr.es/m/20210722205458.f2bug3z6qzxzpx2s@alap3.anarazel.de
The existing data structures in inval.c are fairly inefficient for
the common case of a command or subtransaction that registers a small
number of cache invalidation events. While this doesn't matter if we
commit right away, it can build up to a lot of bloat in a transaction
that contains many DDL operations. By making a few more assumptions
about the expected use-case, we can switch to a representation using
densely-packed arrays. Although this eliminates some data-copying,
it doesn't seem to make much difference time-wise. But the space
consumption decreases substantially.
Patch by me; thanks to Nathan Bossart for review.
Discussion: https://postgr.es/m/2380555.1622395376@sss.pgh.pa.us
During a VACUUM or CLUSTER command, the initial output emits a
fully qualified relation path with namespace. The post-action
errmsg only emitted the relation name however, which may lead
to hard to parse output when using multiple jobs with vacuumdb
as the output from different jobs may be interleaved. Include
the full path in the post-action errmsg to be consistent with
the initial errmsg.
Author: Mike Fiedler <miketheman@gmail.com>
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Discussion: https://postgr.es/m/CAMerE0oz+8G-aORZL_BJcPxnBqewZAvND4bSUysjz+r-oT1BxQ@mail.gmail.com
The initdb help message for --sync-only was a bit terse, and not
really self-explanatory. Make it clearer that initdb --sync-only
will exit after syncing, and expand the docs with a note on when
the option can be useful. Also align the help output with others
that exit immediately.
Author: Nathan Bossart, Gurjeet Singh
Discussion: https://postgr.es/m/CABwTF4U6hbNNE1bv=LxQdJybmUdZ5NJQ9rKY9tN82NXM8QH+iQ@mail.gmail.com
This commit ensures that the wait interval in the replay delay loop
waiting for an amount of time defined by recovery_min_apply_delay is
correctly handled on reload, recalculating the delay if this GUC value
is updated, based on the timestamp of the commit record being replayed.
The previous behavior would be problematic for example with replay
still waiting even if the delay got reduced or just cancelled. If the
apply delay was increased to a larger value, the wait would have just
respected the old value set, finishing earlier.
Author: Soumyadeep Chakraborty, Ashwin Agrawal
Reviewed-by: Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/CAE-ML+93zfr-HLN8OuxF0BjpWJ17O5dv1eMvSE5jsj9jpnAXZA@mail.gmail.com
Backpatch-through: 9.6
Commit 80abbeba2 evidently didn't bother checking this code.
Also, list the generated executable in .gitignore (so it's
been a REALLY long time since anyone tried this).
Noted while trying out RISC-V spinlock patch. Given that
this has been broken for 5 years and nobody noticed, it's
likely not worth back-patching.
Like the ARM case, just use gcc's __sync_lock_test_and_set();
that will compile into AMOSWAP.W.AQ which does what we need.
At some point it might be worth doing some work on atomic ops
for RISC-V, but this should be enough for a creditable port.
Back-patch to all supported branches, just in case somebody
wants to try them on RISC-V.
Marek Szuba
Discussion: https://postgr.es/m/dea97b6d-f55f-1f6d-9109-504aa7dfa421@gentoo.org
Background workers without shared memory access have been broken on
EXEC_BACKEND / windows builds since shortly after background workers have been
introduced, without that being reported. Clearly they are not commonly used.
The problem is that bgworker startup requires to be attached to shared memory
in EXEC_BACKEND child processes. StartBackgroundWorker() detaches from shared
memory for unconnected workers, but at that point we already have initialized
subsystems referencing shared memory.
Fixing this problem is not entirely trivial, so removing the option to not be
connected to shared memory seems the best way forward. In most use cases the
advantages of being connected to shared memory far outweigh the disadvantages.
As there have been no reports about this issue so far, we have decided that it
is not worth trying to address the problem in the back branches.
Per discussion with Alvaro Herrera, Robert Haas and Tom Lane.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210802065116.j763tz3vz4egqy3w@alap3.anarazel.de
The check for sslsni only checked for existence of the parameter
but not for the actual value of the param. This meant that the
SNI extension was always turned on. Fix by inspecting the value
of sslsni and only activate the SNI extension iff sslsni has been
enabled. Also update the docs to be more in line with how other
boolean params are documented.
Backpatch to 14 where sslsni was first implemented.
Reviewed-by: Tom Lane
Backpatch-through: 14, where sslni was added
This fixes a bug in simplehash.h which caused an incorrect size mask to be
used when the hash table grew to SH_MAX_SIZE (2^32). The code was
incorrectly setting the size mask to 0 when the hash tables reached the
maximum possible number of buckets. This would result always trying to
use the 0th bucket causing an infinite loop of trying to grow the hash
table due to there being too many collisions.
Seemingly it's not that common for simplehash tables to ever grow this big
as this bug dates back to v10 and nobody seems to have noticed it before.
However, probably the most likely place that people would notice it would
be doing a large in-memory Hash Aggregate with something close to at least
2^31 groups.
After this fix, the code now works correctly with up to within 98% of 2^32
groups and will fail with the following error when trying to insert any
more items into the hash table:
ERROR: hash table size exceeded
However, the work_mem (or hash_mem_multiplier in newer versions) settings
will generally cause Hash Aggregates to spill to disk long before reaching
that many groups. The minimal test case I did took a work_mem setting of
over 192GB to hit the bug.
simplehash hash tables are used in a few other places such as Bitmap Index
Scans, however, again the size that the hash table can become there is
also limited to work_mem and it would take a relation of around 16TB
(2^31) pages and a very large work_mem setting to hit this. With smaller
work_mem values the table would become lossy and never grow large enough
to hit the problem.
Author: Yura Sokolov
Reviewed-by: David Rowley, Ranier Vilela
Discussion: https://postgr.es/m/b1f7f32737c3438136f64b26f4852b96@postgrespro.ru
Backpatch-through: 10, where simplehash.h was added
It's hard to disable ASLR on current macOS releases, for testing with
-DEXEC_BACKEND. You could already set the environment variable
PG_SHMEM_ADDR to something not likely to collide with mappings created
earlier in process startup. Let's also provide a default value that
works on current releases and architectures, for developer convenience.
As noted in the pre-existing comment, this is a horrible hack, but
-DEXEC_BACKEND is only used by Unix-based PostgreSQL developers for
testing some otherwise Windows-only code paths, so it seems excusable.
Back-patch to all supported branches.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20210806032944.m4tz7j2w47mant26%40alap3.anarazel.de
The FDW batching code was using the same tuple descriptor both for all
slots (regular and plan slots), but that's incorrect - the subplan may
use a different descriptor. Currently this is benign, because batching
is used only for INSERTs, and in that case the descriptors always match.
But that would change if we allow batching UPDATEs.
Fix by copying the appropriate tuple descriptor. Backpatch to 14, where
the FDW batching was implemented.
Author: Amit Langote
Backpatch-through: 14, where FDW batching was added
Discussion: https://postgr.es/m/CA%2BHiwqEWd5B0-e-RvixGGUrNvGkjH2s4m95%3DJcwUnyV%3Df0rAKQ%40mail.gmail.com
Sets of Unicode keys are picky about the primes used when generating
a perfect hash function for them. Callers can spend many seconds
iterating through all the possible combinations of candidate
multipliers and seeds to find one that works.
Unicode updates typically happen only once a year, but it still makes
development and testing of Unicode scripts unnecessarily slow. To fix,
iterate over the primes in the innermost loop. This does not change
any existing functions checked into the tree.
It's not sensible to re-evaluate a direct-modify Foreign Update or Delete
during EvalPlanQual. However, ExecInitForeignScan() can still get called
if a table mixes local and foreign partitions. EvalPlanQualStart() left
the es_result_relations array uninitialized in the child EPQ EState, but
ExecInitForeignScan() still expected to find it. That caused a segfault.
Fix by skipping the es_result_relations lookup during EvalPlanQual
processing. To make things a bit more robust, also skip the
BeginDirectModify calls, and add a runtime check that ExecForeignScan()
is not called on direct-modify foreign scans during EvalPlanQual
processing.
This is new in v14, commit 1375422c78. Before that, EvalPlanQualStart()
copied the whole ResultRelInfo array to the EPQ EState. Backpatch to v14.
Report and diagnosis by Andrey Lepikhov.
Discussion: https://www.postgresql.org/message-id/cb2b808d-cbaa-4772-76ee-c8809bafcf3d%40postgrespro.ru
ALTER TABLE .. SET {LOGGED,UNLOGGED,ACCESS METHOD} would never do a
table-level object access hook, which was inconsistent with SET
TABLESPACE. Note that contrary to SET TABLESPACE, the no-op case is
left off for those commands as this requires tracking if commands have
been called, but they may not execute a physical rewrite. Another thing
worth noting is that the physical file swap at the end of a rewrite
does a couple of access calls for internal objects created for the swap
operation (internal objects are for example skipped by the tests of
sepgsql), but this does not trigger the hook for the table on which the
operation is done.
f41872d, that added support for SET LOGGED/UNLOGGED in ALTER TABLE,
visibly forgot to consider that.
Based on what I checked, two regression tests of sepgsql in ddl.sql are
going to log more information with this test, something that buildfarm
member rhinoceros will tell soon enough. I am not completely sure of
their format though, so these are not refreshed yet.
This is arguably a bug, but no backpatch is done as this could cause a
behavior change for anybody using object access hooks.
Reported-by: Jeff Davis
Discussion: https://postgr.es/m/YQJKV29/1a60uG68@paquier.xyz
If the replacement string doesn't contain \1...\9, then we don't
need sub-match locations, so we can use the REG_NOSUB optimization
here too. There's already a pre-scan of the replacement string
to look for backslashes, so extend that to check for digits, and
refactor to allow that to happen before we compile the regexp.
While at it, try to speed up the pre-scan by using memchr() instead
of a handwritten loop. It's likely that this is lost in the noise
compared to the regexp processing proper, but maybe not. In any
case, this coding is shorter.
Also, add some test cases to improve the poor coverage of
appendStringInfoRegexpSubstr().
Discussion: https://postgr.es/m/3534632.1628536485@sss.pgh.pa.us
Peter Eisentraut
Daniel Gustafsson
Michael Paquier
Tom Lane
Peter Geoghegan
Andres Freund
Alvaro Herrera
David Rowley
Fujii Masao
Magnus Hagander
Thomas Munro
John Naylor
Alexander Korotkov
Tomas Vondra
Amit Kapila
Noah Misch
Heikki Linnakangas
Tatsuo Ishii
Stephen Frost
Robert Haas
Bruce Momjian
Michael Meskes