main tables.
This requires vacuum() to accept processing a toast table standalone, so
there's a user-visible change in that it's now possible (for a superuser) to
execute "VACUUM pg_toast.pg_toast_XXX".
of different types than the underlying column. The capability isn't yet
used for anything, but will be required by upcoming patch to analyze
tsvector columns.
Jan Urbanski
corresponding struct definitions. This allows other headers to avoid including
certain highly-loaded headers such as rel.h and relscan.h, instead using just
relcache.h, heapam.h or genam.h, which are more lightweight and thus cause less
unnecessary dependencies.
grammar allows ALTER TABLE/INDEX/SEQUENCE/VIEW interchangeably for all
subforms of those commands, and then we sort out what's really legal
at execution time. This allows the ALTER SEQUENCE/VIEW reference pages
to fully document all the ALTER forms available for sequences and views
respectively, and eliminates a longstanding cause of confusion for users.
The net effect is that the following forms are allowed that weren't before:
ALTER SEQUENCE OWNER TO
ALTER VIEW ALTER COLUMN SET/DROP DEFAULT
ALTER VIEW OWNER TO
ALTER VIEW SET SCHEMA
(There's no actual functionality gain here, but formerly you had to say
ALTER TABLE instead.)
Interestingly, the grammar tables actually get smaller, probably because
there are fewer special cases to keep track of.
I did not disallow using ALTER TABLE for these operations. Perhaps we
should, but there's a backwards-compatibility issue if we do; in fact
it would break existing pg_dump scripts. I did however tighten up
ALTER SEQUENCE and ALTER VIEW to reject non-sequences and non-views
in the new cases as well as a couple of cases where they didn't before.
The patch doesn't change pg_dump to use the new syntaxes, either.
objects are specified, we drop them all in a single performMultipleDeletions
call. This makes the RESTRICT/CASCADE checks more relaxed: it's not counted
as a cascade if one of the later objects has a dependency on an earlier one.
NOTICE messages about such cases go away, too.
In passing, fix the permissions check for DROP CONVERSION, which for some
reason was never made role-aware, and omitted the namespace-owner exemption
too.
Alex Hunsaker, with further fiddling by me.
sequence to be reset to its original starting value. This requires adding the
original start value to the set of parameters (columns) of a sequence object,
which is a user-visible change with potential compatibility implications;
it also forces initdb.
Also add hopefully-SQL-compatible RESTART/CONTINUE IDENTITY options to
TRUNCATE TABLE. RESTART IDENTITY executes ALTER SEQUENCE RESTART for all
sequences "owned by" any of the truncated relations. CONTINUE IDENTITY is
a no-op option.
Zoltan Boszormenyi
inclusions in src/include/catalog/*.h files. The main idea here is to push
function declarations for src/backend/catalog/*.c files into separate headers,
rather than sticking them into the corresponding catalog definition file as
has been done in the past. This commit only carries out that idea fully for
pg_proc, pg_type and pg_conversion, but that's enough for the moment ---
if pg_list.h ever becomes unsafe for frontend code to include, we'll need
to work a bit more.
Zdenek Kotala
operations when the current transaction has any open references to the
target relation or index (implying it has an active query using the relation).
The need for this was previously recognized in connection with ALTER TABLE,
but anything that summarily eliminates tuples or moves them around would
confuse an active scan.
While this patch does not in itself fix bug #3883 (the deadlock would happen
before the new check fires), it will discourage people from attempting the
sequence of operations that creates a deadlock risk, so it's at least a
partial response to that problem.
In passing, add a previously-missing check to REINDEX to prevent trying to
reindex another backend's temp table. This isn't a security problem since
only a superuser would get past the schema permission checks, but if we are
testing for this in other utility commands then surely REINDEX should too.
in the current backend for the target table. These operations move tuples
around and would thus invalidate the TIDs stored in the trigger event records.
(We need not worry about events in other backends, since acquiring exclusive
lock should be enough to ensure there aren't any.) It might be sufficient
to forbid only the table-rewriting variants of ALTER TABLE, but in the absence
of any compelling use-case, let's just be safe and simple. Per follow-on
investigation of bug #3847, though this is not actually the same problem
reported therein.
Possibly this should be back-patched, but since the case has never been
reported from the field, I didn't bother.
constraint status of copied indexes (bug #3774), as well as various other
small bugs such as failure to pstrdup when needed. Allow INCLUDING INDEXES
indexes to be merged with identical declared indexes (perhaps not real useful,
but the code is there and having it not apply to LIKE indexes seems pretty
unorthogonal). Avoid useless work in generateClonedIndexStmt(). Undo some
poorly chosen API changes, and put a couple of routines in modules that seem
to be better places for them.
but no database changes have been made since the last CommandCounterIncrement.
This should result in a significant improvement in the number of "commands"
that can typically be performed within a transaction before hitting the 2^32
CommandId size limit. In particular this buys back (and more) the possible
adverse consequences of my previous patch to fix plan caching behavior.
The implementation requires tracking whether the current CommandCounter
value has been "used" to mark any tuples. CommandCounter values stored into
snapshots are presumed not to be used for this purpose. This requires some
small executor changes, since the executor used to conflate the curcid of
the snapshot it was using with the command ID to mark output tuples with.
Separating these concepts allows some small simplifications in executor APIs.
Something for the TODO list: look into having CommandCounterIncrement not do
AcceptInvalidationMessages. It seems fairly bogus to be doing it there,
but exactly where to do it instead isn't clear, and I'm disinclined to mess
with asynchronous behavior during late beta.
init options of the template as top-level options in the syntax. This also
makes ALTER a bit easier to use, since options can be replaced individually.
I also made these statements verify that the tmplinit method will accept
the new settings before they get stored; in the original coding you didn't
find out about mistakes until the dictionary got invoked.
Under the hood, init methods now get options as a List of DefElem instead
of a raw text string --- that lets tsearch use existing options-pushing code
instead of duplicating functionality.
Oleg Bartunov and Teodor Sigaev, but I did a lot of editorializing,
so anything that's broken is probably my fault.
Documentation is nonexistent as yet, but let's land the patch so we can
get some portability testing done.
displayed in the postmaster log. This avoids Windows-specific problems with
localized time zone names that are in the wrong encoding, and generally seems
like a good idea to forestall other potential platform-dependent issues.
To preserve the existing behavior that all backends will log in the same time
zone, create a new GUC variable log_timezone that can only be changed on a
system-wide basis, and reference log-related calculations to that zone instead
of the TimeZone variable.
This fixes the issue reported by Hiroshi Saito that timestamps printed by
xlog.c startup could be improperly localized on Windows. We still need a
simpler patch for that problem in the back branches, however.
Sequences and views could previously be renamed using ALTER TABLE, but
this was a repeated source of confusion for users. Update the docs,
and psql tab completion. Patch from David Fetter; various minor fixes
by myself.
for each temp file, rather than once per sort or hashjoin; this allows
spreading the data of a large sort or join across multiple tablespaces.
(I remain dubious that this will make any difference in practice, but certain
people insisted.) Arrange to cache the results of parsing the GUC variable
instead of recomputing from scratch on every demand, and push usage of the
cache down to the bottommost fd.c level.
tablespace(s) in which to store temp tables and temporary files. This is a
list to allow spreading the load across multiple tablespaces (a random list
element is chosen each time a temp object is to be created). Temp files are
not stored in per-database pgsql_tmp/ directories anymore, but per-tablespace
directories.
Jaime Casanova and Albert Cervera, with review by Bernd Helmle and Tom Lane.
buffers, rather than blowing out the whole shared-buffer arena. Aside from
avoiding cache spoliation, this fixes the problem that VACUUM formerly tended
to cause a WAL flush for every page it modified, because we had it hacked to
use only a single buffer. Those flushes will now occur only once per
ring-ful. The exact ring size, and the threshold for seqscans to switch into
the ring usage pattern, remain under debate; but the infrastructure seems
done. The key bit of infrastructure is a new optional BufferAccessStrategy
object that can be passed to ReadBuffer operations; this replaces the former
StrategyHintVacuum API.
This patch also changes the buffer usage-count methodology a bit: we now
advance usage_count when first pinning a buffer, rather than when last
unpinning it. To preserve the behavior that a buffer's lifetime starts to
decrease when it's released, the clock sweep code is modified to not decrement
usage_count of pinned buffers.
Work not done in this commit: teach GiST and GIN indexes to use the vacuum
BufferAccessStrategy for vacuum-driven fetches.
Original patch by Simon, reworked by Heikki and again by Tom.
and/or create plans for hypothetical situations; in particular, investigate
plans that would be generated using hypothetical indexes. This is a
heavily-rewritten version of the hooks proposed by Gurjeet Singh for his
Index Advisor project. In this formulation, the index advisor can be
entirely a loadable module instead of requiring a significant part to be
in the core backend, and plans can be generated for hypothetical indexes
without requiring the creation and rolling-back of system catalog entries.
The index advisor patch as-submitted is not compatible with these hooks,
but it needs significant work anyway due to other 8.2-to-8.3 planner
changes. With these hooks in the core backend, development of the advisor
can proceed as a pgfoundry project.
FreezeXid introduced in a recent commit, so there isn't any data loss in this
approach.
Doing it causes ALTER TABLE (or rather, the forms of it that cause a full table
rewrite) to be affected as well. In this case, the frozen point is RecentXmin,
because after the rewrite all the tuples are relabeled with the rewriting
transaction's Xid.
TOAST tables are fixed automatically as well, as fallout of the way they were
already being handled in the respective code paths.
With this patch, there is no longer need to VACUUM tables for Xid wraparound
purposes that have been cleaned up via TRUNCATE or CLUSTER.
to avoid losing useful Xid information in not-so-old tuples. This makes
CLUSTER behave the same as VACUUM as far a tuple-freezing behavior goes
(though CLUSTER does not yet advance the table's relfrozenxid).
While at it, move the actual freezing operation in rewriteheap.c to a more
appropriate place, and document it thoroughly. This part of the patch from
Tom Lane.
needs to check the new constraint against columns of derived domains too.
Also, make it error out if the domain to be modified is used within any
composite-type columns. Eventually we should support that case, but it seems
a bit painful, and not suitable for a back-patch. For the moment just let the
user know we can't do it.
Backpatch to 8.2, which is the only released version that allows nested
domains. Possibly the other part should be back-patched further.
and views (but not system catalogs, nor sequences or toast tables). Get rid
of the hardwired convention that a type's array type is named exactly "_type",
instead using a new column pg_type.typarray to provide the linkage. (It still
will be named "_type", though, except in odd corner cases such as
maximum-length type names.)
Along the way, make tracking of owner and schema dependencies for types more
uniform: a type directly created by the user has these dependencies, while a
table rowtype or auto-generated array type does not have them, but depends on
its parent object instead.
David Fetter, Andrew Dunstan, Tom Lane
types of unspecified parameters when submitted via extended query protocol.
This worked in 8.2 but I had broken it during plancache changes. DECLARE
CURSOR is now treated almost exactly like a plain SELECT through parse
analysis, rewrite, and planning; only just before sending to the executor
do we divert it away to ProcessUtility. This requires a special-case check
in a number of places, but practically all of them were already special-casing
SELECT INTO, so it's not too ugly. (Maybe it would be a good idea to merge
the two by treating IntoClause as a form of utility statement? Not going to
worry about that now, though.) That approach doesn't work for EXPLAIN,
however, so for that I punted and used a klugy solution of running parse
analysis an extra time if under extended query protocol.
RESET SESSION, RESET PLANS, and RESET TEMP are now DISCARD ALL,
DISCARD PLANS, and DISCARD TEMP, respectively. This is to avoid
confusion with the pre-existing RESET variants: the DISCARD
commands are not actually similar to RESET. Patch from Marko
Kreen, with some minor editorialization.
a replan. I had originally thought this was not necessary, but the new
SPI facilities create a path whereby queries planned with non-default
options can get into the cache, so it is necessary.
reviewed by Neil Conway. This patch adds the following DDL command
variants: RESET SESSION, RESET TEMP, RESET PLANS, CLOSE ALL, and
DEALLOCATE ALL. RESET SESSION is intended for use by connection
pool software and the like, in order to reset a client session
to something close to its initial state.
Note that while most of these command variants can be executed
inside a transaction block (but are not transaction-aware!),
RESET SESSION cannot. While this is inconsistent, it is intended
to catch programmer mistakes: RESET SESSION in an open transaction
block is probably unintended.
A DBA is allowed to create a language in his database if it's marked
"tmpldbacreate" in pg_pltemplate. The factory default is that this is set
for all standard trusted languages, but of course a superuser may adjust
the settings. In service of this, add the long-foreseen owner column to
pg_language; renaming, dropping, and altering owner of a PL now follow
normal ownership rules instead of being superuser-only.
Jeremy Drake, with some editorialization by Tom Lane.
rules to be defined with different, per session controllable, behaviors
for replication purposes.
This will allow replication systems like Slony-I and, as has been stated
on pgsql-hackers, other products to control the firing mechanism of
triggers and rewrite rules without modifying the system catalog directly.
The firing mechanisms are controlled by a new superuser-only GUC
variable, session_replication_role, together with a change to
pg_trigger.tgenabled and a new column pg_rewrite.ev_enabled. Both
columns are a single char data type now (tgenabled was a bool before).
The possible values in these attributes are:
'O' - Trigger/Rule fires when session_replication_role is "origin"
(default) or "local". This is the default behavior.
'D' - Trigger/Rule is disabled and fires never
'A' - Trigger/Rule fires always regardless of the setting of
session_replication_role
'R' - Trigger/Rule fires when session_replication_role is "replica"
The GUC variable can only be changed as long as the system does not have
any cached query plans. This will prevent changing the session role and
accidentally executing stored procedures or functions that have plans
cached that expand to the wrong query set due to differences in the rule
firing semantics.
The SQL syntax for changing a triggers/rules firing semantics is
ALTER TABLE <tabname> <when> TRIGGER|RULE <name>;
<when> ::= ENABLE | ENABLE ALWAYS | ENABLE REPLICA | DISABLE
psql's \d command as well as pg_dump are extended in a backward
compatible fashion.
Jan
module and teach PREPARE and protocol-level prepared statements to use it.
In service of this, rearrange utility-statement processing so that parse
analysis does not assume table schemas can't change before execution for
utility statements (necessary because we don't attempt to re-acquire locks
for utility statements when reusing a stored plan). This requires some
refactoring of the ProcessUtility API, but it ends up cleaner anyway,
for instance we can get rid of the QueryContext global.
Still to do: fix up SPI and related code to use the plan cache; I'm tempted to
try to make SQL functions use it too. Also, there are at least some aspects
of system state that we want to ensure remain the same during a replan as in
the original processing; search_path certainly ought to behave that way for
instance, and perhaps there are others.
storing mostly-redundant Query trees in prepared statements, portals, etc.
To replace Query, a new node type called PlannedStmt is inserted by the
planner at the top of a completed plan tree; this carries just the fields of
Query that are still needed at runtime. The statement lists kept in portals
etc. now consist of intermixed PlannedStmt and bare utility-statement nodes
--- no Query. This incidentally allows us to remove some fields from Query
and Plan nodes that shouldn't have been there in the first place.
Still to do: simplify the execution-time range table; at the moment the
range table passed to the executor still contains Query trees for subqueries.
initdb forced due to change of stored rules.
equality checks it applies, instead of a random dependence on whatever
operators might be named "=". The equality operators will now be selected
from the opfamily of the unique index that the FK constraint depends on to
enforce uniqueness of the referenced columns; therefore they are certain to be
consistent with that index's notion of equality. Among other things this
should fix the problem noted awhile back that pg_dump may fail for foreign-key
constraints on user-defined types when the required operators aren't in the
search path. This also means that the former warning condition about "foreign
key constraint will require costly sequential scans" is gone: if the
comparison condition isn't indexable then we'll reject the constraint
entirely. All per past discussions.
Along the way, make the RI triggers look into pg_constraint for their
information, instead of using pg_trigger.tgargs; and get rid of the always
error-prone fixed-size string buffers in ri_triggers.c in favor of building up
the RI queries in StringInfo buffers.
initdb forced due to columns added to pg_constraint and pg_trigger.
FAMILY; and add FAMILY option to CREATE OPERATOR CLASS to allow adding a
class to a pre-existing family. Per previous discussion. Man, what a
tedious lot of cutting and pasting ...
cases. Operator classes now exist within "operator families". While most
families are equivalent to a single class, related classes can be grouped
into one family to represent the fact that they are semantically compatible.
Cross-type operators are now naturally adjunct parts of a family, without
having to wedge them into a particular opclass as we had done originally.
This commit restructures the catalogs and cleans up enough of the fallout so
that everything still works at least as well as before, but most of the work
needed to actually improve the planner's behavior will come later. Also,
there are not yet CREATE/DROP/ALTER OPERATOR FAMILY commands; the only way
to create a new family right now is to allow CREATE OPERATOR CLASS to make
one by default. I owe some more documentation work, too. But that can all
be done in smaller pieces once this infrastructure is in place.
in PITR scenarios. We now WAL-log the replacement of old XIDs with
FrozenTransactionId, so that such replacement is guaranteed to propagate to
PITR slave databases. Also, rather than relying on hint-bit updates to be
preserved, pg_clog is not truncated until all instances of an XID are known to
have been replaced by FrozenTransactionId. Add new GUC variables and
pg_autovacuum columns to allow management of the freezing policy, so that
users can trade off the size of pg_clog against the amount of freezing work
done. Revise the already-existing code that forces autovacuum of tables
approaching the wraparound point to make it more bulletproof; also, revise the
autovacuum logic so that anti-wraparound vacuuming is done per-table rather
than per-database. initdb forced because of changes in pg_class, pg_database,
and pg_autovacuum catalogs. Heikki Linnakangas, Simon Riggs, and Tom Lane.
