Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The combination of -Z -Fp and output to stdout resulted in corrupted
output data, because we left stdout in text mode, resulting in newline
conversion being done on the compressed stream. Switch stdout to binary
mode for this case, at the same place where we do it for non-text output
formats.
Report and patch by Kuntal Ghosh, tested by Ashutosh Sharma and Neha
Sharma. Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAGz5QCJPvbBjXAmJuGx1B_41yVCetAJhp7rtaDf7XQGWuB1GSw@mail.gmail.com
In struct _archiveHandle, some of the fields have the same name as a
typedef. This is kind of confusing, so rename the types so they have
names distinct from the struct fields. In C++, the previous coding
changes the meaning of the typedef in the scope of the struct, causing
warnings and possibly other problems.
Reviewed-by: Andres Freund <andres@anarazel.de>
Add support for explicitly declared statistic objects (CREATE
STATISTICS), allowing collection of statistics on more complex
combinations that individual table columns. Companion commands DROP
STATISTICS and ALTER STATISTICS ... OWNER TO / SET SCHEMA / RENAME are
added too. All this DDL has been designed so that more statistic types
can be added later on, such as multivariate most-common-values and
multivariate histograms between columns of a single table, leaving room
for permitting columns on multiple tables, too, as well as expressions.
This commit only adds support for collection of n-distinct coefficient
on user-specified sets of columns in a single table. This is useful to
estimate number of distinct groups in GROUP BY and DISTINCT clauses;
estimation errors there can cause over-allocation of memory in hashed
aggregates, for instance, so it's a worthwhile problem to solve. A new
special pseudo-type pg_ndistinct is used.
(num-distinct estimation was deemed sufficiently useful by itself that
this is worthwhile even if no further statistic types are added
immediately; so much so that another version of essentially the same
functionality was submitted by Kyotaro Horiguchi:
https://postgr.es/m/20150828.173334.114731693.horiguchi.kyotaro@lab.ntt.co.jp
though this commit does not use that code.)
Author: Tomas Vondra. Some code rework by Álvaro.
Reviewed-by: Dean Rasheed, David Rowley, Kyotaro Horiguchi, Jeff Janes,
Ideriha Takeshi
Discussion: https://postgr.es/m/543AFA15.4080608@fuzzy.czhttps://postgr.es/m/20170320190220.ixlaueanxegqd5gr@alvherre.pgsql
Commits 89e0bac86 et al replaced newlines with spaces in object names
printed in SQL comments, but we neglected to consider that the same
names are also printed by "pg_restore -l", and a newline would render
the output unparseable by "pg_restore -L". Apply the same replacement
in "-l" output. Since "pg_restore -L" doesn't actually examine any
object names, only the dump ID field that starts each line, this is
enough to fix things for its purposes.
The previous fix was treated as a security issue, and we might have
done that here as well, except that the issue was reported publicly
to start with. Anyway it's hard to see how this could be exploited
for SQL injection; "pg_restore -L" doesn't do much with the file
except parse it for leading integers.
Per bug #14587 from Milos Urbanek. Back-patch to all supported versions.
Discussion: https://postgr.es/m/20170310155318.1425.30483@wrigleys.postgresql.org
When performing a pg_upgrade, we copy the files behind pg_largeobject
and pg_largeobject_metadata, allowing us to avoid having to dump out and
reload the actual data for large objects and their ACLs.
Unfortunately, that isn't all of the information which can be associated
with large objects. Currently, we also support COMMENTs and SECURITY
LABELs with large objects and these were being silently dropped during a
pg_upgrade as pg_dump would skip everything having to do with a large
object and pg_upgrade only copied the tables mentioned to the new
cluster.
As the file copies happen after the catalog dump and reload, we can't
simply include the COMMENTs and SECURITY LABELs in pg_dump's binary-mode
output but we also have to include the actual large object definition as
well. With the definition, comments, and security labels in the pg_dump
output and the file copies performed by pg_upgrade, all of the data and
metadata associated with large objects is able to be successfully pulled
forward across a pg_upgrade.
In 9.6 and master, we can simply adjust the dump bitmask to indicate
which components we don't want. In 9.5 and earlier, we have to put
explciit checks in in dumpBlob() and dumpBlobs() to not include the ACL
or the data when in binary-upgrade mode.
Adjustments made to the privileges regression test to allow another test
(large_object.sql) to be added which explicitly leaves a large object
with a comment in place to provide coverage of that case with
pg_upgrade.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/20170221162655.GE9812@tamriel.snowman.net
c.h #includes a number of core libc header files, such as <stdio.h>.
There's no point in re-including these after having read postgres.h,
postgres_fe.h, or c.h; so remove code that did so.
While at it, also fix some places that were ignoring our standard pattern
of "include postgres[_fe].h, then system header files, then other Postgres
header files". While there's not any great magic in doing it that way
rather than system headers last, it's silly to have just a few files
deviating from the general pattern. (But I didn't attempt to enforce this
globally, only in files I was touching anyway.)
I'd be the first to say that this is mostly compulsive neatnik-ism,
but over time it might save enough compile cycles to be useful.
Teach it not to complain if the dropStmt attached to an archive entry
is actually spelled CREATE OR REPLACE VIEW, since that will happen due to
an upcoming bug fix. Also, if it doesn't recognize a dropStmt, have it
print a WARNING and then emit the dropStmt unmodified. That seems like a
much saner behavior than Assert'ing or dumping core due to a null-pointer
dereference, which is what would happen before :-(.
Back-patch to 9.4 where this option was introduced.
Discussion: <19092.1479325184@sss.pgh.pa.us>
Previously, pg_upgrade migrated sequence data like tables by copying the
on-disk file. This does not allow any changes in the on-disk format for
sequences. It's simpler to just have pg_dump set the new sequence
values as it normally does. To do that, create a hidden submode in
pg_dump that dumps sequence data even when a schema-only dump is
requested, and trigger that submode in binary upgrade mode. (This new
submode could easily be exposed as a command-line option, but it has
limited use outside of pg_dump and would probably cause some confusion,
so we don't do that at this time.)
Reviewed-by: Anastasia Lubennikova <a.lubennikova@postgrespro.ru>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
The ArchiveHandle structure contained the archive format version number
twice, once as a single field and once split into components. Simplify
that by just keeping the single field and adding some macros to extract
the components. Introduce some macros for composing version numbers, to
eliminate the repeated use of magic formulas. Drop the unused trailing
zero byte from the run-time composite version representation.
reviewed by Tom Lane
The need for dumping from such ancient servers has decreased to about nil
in the field, so let's remove all the code that catered to it. Aside
from removing a lot of boilerplate variant queries, this allows us to not
have to cope with servers that don't have (a) schemas or (b) pg_depend.
That means we can get rid of assorted squishy code around that. There
may be some nonobvious additional simplifications possible, but this patch
already removes about 1500 lines of code.
I did not remove the ability for pg_restore to read custom-format archives
generated by these old versions (and light testing says that that does
still work). If you have an old server, you probably also have a pg_dump
that will work with it; but you have an old custom-format backup file,
that might be all you have.
It'd be possible at this point to remove fmtQualifiedId()'s version
argument, but I refrained since that would affect code outside pg_dump.
Discussion: <2661.1475849167@sss.pgh.pa.us>
The only field of this struct that other files have any need to touch
is the pointer to the TocEntry a worker is working on. (Well,
pg_backup_archiver.c is actually looking at workerStatus too, but that
can be finessed by specifying that the TocEntry pointer is NULL for a
non-busy worker.)
Hence, move out the TocEntry pointers to a separate array within
struct ParallelState, and then we can make struct ParallelSlot private.
I noted the possibility of this previously, but hadn't got round to
actually doing it.
Discussion: <1188.1464544443@sss.pgh.pa.us>
The ListenToWorkers/ReapWorkerStatus APIs were messy and hard to use.
Instead, make DispatchJobForTocEntry register a callback function that
will take care of state cleanup, doing whatever had been done by the caller
of ReapWorkerStatus in the old design. (This callback is essentially just
the old mark_work_done function in the restore case, and a trivial test for
worker failure in the dump case.) Then we can have ListenToWorkers call
the callback immediately on receipt of a status message, and return the
worker to WRKR_IDLE state; so the WRKR_FINISHED state goes away.
This allows us to design a unified wait-for-worker-messages loop:
WaitForWorkers replaces EnsureIdleWorker and EnsureWorkersFinished as well
as the mess in restore_toc_entries_parallel. Also, we no longer need the
fragile API spec that the caller of DispatchJobForTocEntry is responsible
for ensuring there's an idle worker, since DispatchJobForTocEntry can just
wait until there is one.
In passing, I got rid of the ParallelArgs struct, which was a net negative
in terms of notational verboseness, and didn't seem to be providing any
noticeable amount of abstraction either.
Tom Lane, reviewed by Kevin Grittner
Discussion: <1188.1464544443@sss.pgh.pa.us>
This is similar to the -N option in pg_dump, except that it doesn't take
a pattern, just like the existing -n option in pg_restore.
From: Michael Banck <michael.banck@credativ.de>
Due to simplistic quoting and confusion of database names with conninfo
strings, roles with the CREATEDB or CREATEROLE option could escalate to
superuser privileges when a superuser next ran certain maintenance
commands. The new coding rule for PQconnectdbParams() calls, documented
at conninfo_array_parse(), is to pass expand_dbname=true and wrap
literal database names in a trivial connection string. Escape
zero-length values in appendConnStrVal(). Back-patch to 9.1 (all
supported versions).
Nathan Bossart, Michael Paquier, and Noah Misch. Reviewed by Peter
Eisentraut. Reported by Nathan Bossart.
Security: CVE-2016-5424
Since -c plus -C requests dropping and recreating the target database
as a whole, not dropping individual objects in it, we should assume that
the public schema already exists and need not be created. The previous
coding considered only the state of the -c option, so it would emit
"CREATE SCHEMA public" anyway, leading to an unexpected error in restore.
Back-patch to 9.2. Older versions did not accept -c with -C so the
issue doesn't arise there. (The logic being patched here dates to 8.0,
cf commit 2193121fa, so it's not really wrong that it didn't consider
the case at the time.)
Note that versions before 9.6 will still attempt to emit REVOKE/GRANT
on the public schema; but that happens without -c/-C too, and doesn't
seem to be the focus of this complaint. I considered extending this
stanza to also skip the public schema's ACL, but that would be a
misfeature, as it'd break cases where users intentionally changed that
ACL. The real fix for this aspect is Stephen Frost's work to not dump
built-in ACLs, and that's not going to get back-ported.
Per bugs #13804 and #14271. Solution found by David Johnston and later
rediscovered by me.
Report: <20151207163520.2628.95990@wrigleys.postgresql.org>
Report: <20160801021955.1430.47434@wrigleys.postgresql.org>
We disable statement_timeout and lock_timeout during dump and restore, to
prevent any global settings that might exist from breaking routine backups.
Commit c6dda1f48 should have added idle_in_transaction_session_timeout to
that list, but failed to.
Another place where these timeouts get turned off is autovacuum. While
I doubt an idle timeout could fire there, it seems better to be safe than
sorry.
pg_dump issue noted by Bernd Helmle, the other one found by grepping.
Report: <352F9B77DB5D3082578D17BB@eje.land.credativ.lan>
Formerly, Unix builds of pg_dump/pg_restore would trap SIGINT and similar
signals and set a flag that was tested in various data-transfer loops.
This was prone to errors of omission (cf commit 3c8aa6654); and even if
the client-side response was prompt, we did nothing that would cause
long-running SQL commands (e.g. CREATE INDEX) to terminate early.
Also, the master process would effectively do nothing at all upon receipt
of SIGINT; the only reason it seemed to work was that in typical scenarios
the signal would also be delivered to the child processes. We should
support termination when a signal is delivered only to the master process,
though.
Windows builds had no console interrupt handler, so they would just fall
over immediately at control-C, again leaving long-running SQL commands to
finish unmolested.
To fix, remove the flag-checking approach altogether. Instead, allow the
Unix signal handler to send a cancel request directly and then exit(1).
In the master process, also have it forward the signal to the children.
On Windows, add a console interrupt handler that behaves approximately
the same. The main difference is that a single execution of the Windows
handler can send all the cancel requests since all the info is available
in one process, whereas on Unix each process sends a cancel only for its
own database connection.
In passing, fix an old problem that DisconnectDatabase tends to send a
cancel request before exiting a parallel worker, even if nothing went
wrong. This is at least a waste of cycles, and could lead to unexpected
log messages, or maybe even data loss if it happened in pg_restore (though
in the current code the problem seems to affect only pg_dump). The cause
was that after a COPY step, pg_dump was leaving libpq in PGASYNC_BUSY
state, causing PQtransactionStatus() to report PQTRANS_ACTIVE. That's
normally harmless because the next PQexec() will silently clear the
PGASYNC_BUSY state; but in a parallel worker we might exit without any
additional SQL commands after a COPY step. So add an extra PQgetResult()
call after a COPY to allow libpq to return to PGASYNC_IDLE state.
This is a bug fix, IMO, so back-patch to 9.3 where parallel dump/restore
were introduced.
Thanks to Kyotaro Horiguchi for Windows testing and code suggestions.
Original-Patch: <7005.1464657274@sss.pgh.pa.us>
Discussion: <20160602.174941.256342236.horiguchi.kyotaro@lab.ntt.co.jp>
Parallel dump did a totally pointless query to find out the name of each
table to be dumped, which it already knows. Parallel restore runs issued
lots of redundant SET commands because _doSetFixedOutputState() was invoked
once per TOC item rather than just once at connection start. While the
extra queries are insignificant if you're dumping or restoring large
tables, it still seems worth getting rid of them.
Also, give the responsibility for selecting the right client_encoding for
a parallel dump worker to setup_connection() where it naturally belongs,
instead of having ad-hoc code for that in CloneArchive(). And fix some
minor bugs like use of strdup() where pg_strdup() would be safer.
Back-patch to 9.3, mostly to keep the branches in sync in an area that
we're still finding bugs in.
Discussion: <5086.1464793073@sss.pgh.pa.us>
The commentary in this file was in extremely sad shape. The author(s)
had clearly never heard of the project convention that a function header
comment should provide an API spec of some sort for that function. Much
of it was flat out wrong, too --- maybe it was accurate when written, but
if so it had not been updated to track subsequent code revisions. Rewrite
and rearrange to try to bring it up to speed, and annotate some of the
places where more work is needed. (I've refrained from actually fixing
anything of substance ... yet.)
Also, rename a couple of functions for more clarity as to what they do,
do some very minor code rearrangement, remove some pointless Asserts,
fix an incorrect Assert in readMessageFromPipe, and add a missing socket
close in one error exit from pgpipe(). The last would be a bug if we
tried to continue after pgpipe() failure, but since we don't, it's just
cosmetic at present.
Although this is only cosmetic, back-patch to 9.3 where parallel.c was
added. It's sufficiently invasive that it'll pose a hazard for future
back-patching if we don't.
Discussion: <25239.1464386067@sss.pgh.pa.us>
For some reason the code to emit a warning and switch to uncompressed
output was placed down in the guts of pg_backup_archiver.c. This is
definitely too late in the case of parallel operation (and I rather
wonder if it wasn't too late for other purposes as well). Put it in
pg_dump.c's option-processing logic, which seems a much saner place.
Also, the default behavior with custom or directory output format was
to emit the warning telling you the output would be uncompressed. This
seems unhelpful, so silence that case.
Back-patch to 9.3 where parallel dump was introduced.
Kyotaro Horiguchi, adjusted a bit by me
Report: <20160526.185551.242041780.horiguchi.kyotaro@lab.ntt.co.jp>
Per discussion, we want to create a static library and put the stuff into
it that until now has been shared across src/bin/ directories by ad-hoc
methods like symlinking a source file. This commit creates the library and
populates it with a couple of files that contain the widely-useful portions
of pg_dump's dumputils.c file. dumputils.c survives, because it has some
stuff that didn't seem appropriate for fe_utils, but it's significantly
smaller and is no longer referenced from any other directory.
Follow-on patches will move more stuff into fe_utils.
The Mkvcbuild.pm hacking here is just a best guess; we'll see how the
buildfarm likes it.
Rather than passing around DumpOptions and RestoreOptions as separate
arguments, add fields to struct Archive to carry pointers to these objects,
and access them through those fields when needed. There already was a
RestoreOptions pointer in Archive, though for no obvious reason it was part
of the "private" struct rather than out where pg_dump.c could see it.
Doing this allows reversion of quite a lot of parameter-addition changes
made in commit 0eea8047bf, which is a good thing IMO because this will
reduce the code delta between 9.4 and 9.5, probably easing a few future
back-patch efforts. Moreover, the previous commit only added a DumpOptions
argument to functions that had to have it at the time, which means we could
anticipate still more code churn (and more back-patch hazard) as the
requirement spread further. I'd hit exactly that problem in my upcoming
patch to fix extension membership marking, which is what motivated me to
do this.
Patch provides command line option --strict-names which requires that at
least one table/schema should present for each -t/-n option.
Pavel Stehule <pavel.stehule@gmail.com>
-t will now match views, foreign tables, materialized views, and sequences,
not only plain tables. This is more useful, and also more consistent with
the behavior of pg_dump's -t switch, which has always matched all relation
types.
We're still not there on matching pg_dump's behavior entirely, so mention
that in the docs.
Craig Ringer, reviewed by Pavel Stehule
Patch by David Rowley. Backpatch to 9.5, as some of the calls were new in
9.5, and keeping the code in sync with master makes future backpatching
easier.
Somebody apparently threw darts at the code to decide where to insert
these. They certainly didn't proceed by adding them where other similar
SETs were handled. This at least broke pg_restore, and perhaps other
use-cases too.
strncpy() has a well-deserved reputation for being unsafe, so make an
effort to get rid of nearly all occurrences in HEAD.
A large fraction of the remaining uses were passing length less than or
equal to the known strlen() of the source, in which case no null-padding
can occur and the behavior is equivalent to memcpy(), though doubtless
slower and certainly harder to reason about. So just use memcpy() in
these cases.
In other cases, use either StrNCpy() or strlcpy() as appropriate (depending
on whether padding to the full length of the destination buffer seems
useful).
I left a few strncpy() calls alone in the src/timezone/ code, to keep it
in sync with upstream (the IANA tzcode distribution). There are also a
few such calls in ecpg that could possibly do with more analysis.
AFAICT, none of these changes are more than cosmetic, except for the four
occurrences in fe-secure-openssl.c, which are in fact buggy: an overlength
source leads to a non-null-terminated destination buffer and ensuing
misbehavior. These don't seem like security issues, first because no stack
clobber is possible and second because if your values of sslcert etc are
coming from untrusted sources then you've got problems way worse than this.
Still, it's undesirable to have unpredictable behavior for overlength
inputs, so back-patch those four changes to all active branches.
Commit 0eea8047bf introduced some overly
optimistic assumptions about what could be in a local struct variable's
initializer. (This might in fact be valid code according to C99, but I've
got at least one pre-C99 compiler that falls over on those nonconstant
address expressions.) There is no reason whatsoever for main()'s workspace
to not be static, so revert long_options[] to a static and make the
DumpOptions struct static as well.
As pointed out by Robert, we should really have named pg_rowsecurity
pg_policy, as the objects stored in that catalog are policies. This
patch fixes that and updates the column names to start with 'pol' to
match the new catalog name.
The security consideration for COPY with row level security, also
pointed out by Robert, has also been addressed by remembering and
re-checking the OID of the relation initially referenced during COPY
processing, to make sure it hasn't changed under us by the time we
finish planning out the query which has been built.
Robert and Alvaro also commented on missing OCLASS and OBJECT entries
for POLICY (formerly ROWSECURITY or POLICY, depending) in various
places. This patch fixes that too, which also happens to add the
ability to COMMENT on policies.
In passing, attempt to improve the consistency of messages, comments,
and documentation as well. This removes various incarnations of
'row-security', 'row-level security', 'Row-security', etc, in favor
of 'policy', 'row level security' or 'row_security' as appropriate.
Happy Thanksgiving!
Commit ad5d46a449 thought that we could
get around the known portability issues of strftime's %Z specifier by
using %z instead. However, that idea seems to have been innocent of
any actual research, as it certainly missed the facts that
(1) %z is not portable to pre-C99 systems, and
(2) %z doesn't actually act differently from %Z on Windows anyway.
Per failures on buildfarm member hamerkop.
While at it, centralize the code defining what strftime format we
want to use in pg_dump; three copies of that string seems a bit much.
Most pg_dump.c global variables, which were passed down individually to
dumping routines, are now grouped as members of the new DumpOptions
struct, which is used as a local variable and passed down into routines
that need it. This helps future development efforts; in particular it
is said to enable a mode in which a parallel pg_dump run can output
multiple streams, and have them restored in parallel.
Also take the opportunity to clean up the pg_dump header files somewhat,
to avoid circularity.
Author: Joachim Wieland, revised by Álvaro Herrera
Reviewed by Peter Eisentraut
Without this fix, parallel restore of a schema-only dump can deadlock,
because when the dump is schema-only, the dependency will still be
pointing at the TABLE item rather than the TABLE DATA item.
Robert Haas and Tom Lane
Buildfarm member tick identified an issue where the policies in the
relcache for a relation were were being replaced underneath a running
query, leading to segfaults while processing the policies to be added
to a query. Similar to how TupleDesc RuleLocks are handled, add in a
equalRSDesc() function to check if the policies have actually changed
and, if not, swap back the rsdesc field (using the original instead of
the temporairly built one; the whole structure is swapped and then
specific fields swapped back). This now passes a CLOBBER_CACHE_ALWAYS
for me and should resolve the buildfarm error.
In addition to addressing this, add a new chapter in Data Definition
under Privileges which explains row security and provides examples of
its usage, change \d to always list policies (even if row security is
disabled- but note that it is disabled, or enabled with no policies),
rework check_role_for_policy (it really didn't need the entire policy,
but it did need to be using has_privs_of_role()), and change the field
in pg_class to relrowsecurity from relhasrowsecurity, based on
Heikki's suggestion. Also from Heikki, only issue SET ROW_SECURITY in
pg_restore when talking to a 9.5+ server, list Bypass RLS in \du, and
document --enable-row-security options for pg_dump and pg_restore.
Lastly, fix a number of minor whitespace and typo issues from Heikki,
Dimitri, add a missing #include, per Peter E, fix a few minor
variable-assigned-but-not-used and resource leak issues from Coverity
and add tab completion for role attribute bypassrls as well.
Building on the updatable security-barrier views work, add the
ability to define policies on tables to limit the set of rows
which are returned from a query and which are allowed to be added
to a table. Expressions defined by the policy for filtering are
added to the security barrier quals of the query, while expressions
defined to check records being added to a table are added to the
with-check options of the query.
New top-level commands are CREATE/ALTER/DROP POLICY and are
controlled by the table owner. Row Security is able to be enabled
and disabled by the owner on a per-table basis using
ALTER TABLE .. ENABLE/DISABLE ROW SECURITY.
Per discussion, ROW SECURITY is disabled on tables by default and
must be enabled for policies on the table to be used. If no
policies exist on a table with ROW SECURITY enabled, a default-deny
policy is used and no records will be visible.
By default, row security is applied at all times except for the
table owner and the superuser. A new GUC, row_security, is added
which can be set to ON, OFF, or FORCE. When set to FORCE, row
security will be applied even for the table owner and superusers.
When set to OFF, row security will be disabled when allowed and an
error will be thrown if the user does not have rights to bypass row
security.
Per discussion, pg_dump sets row_security = OFF by default to ensure
that exports and backups will have all data in the table or will
error if there are insufficient privileges to bypass row security.
A new option has been added to pg_dump, --enable-row-security, to
ask pg_dump to export with row security enabled.
A new role capability, BYPASSRLS, which can only be set by the
superuser, is added to allow other users to be able to bypass row
security using row_security = OFF.
Many thanks to the various individuals who have helped with the
design, particularly Robert Haas for his feedback.
Authors include Craig Ringer, KaiGai Kohei, Adam Brightwell, Dean
Rasheed, with additional changes and rework by me.
Reviewers have included all of the above, Greg Smith,
Jeff McCormick, and Robert Haas.
Tom Lane
Bruce Momjian
Peter Eisentraut
Alvaro Herrera
Andrew Dunstan
Stephen Frost
Noah Misch
Teodor Sigaev
Heikki Linnakangas
Robert Haas