Commit c0d5be5d6 caused pg_dump to create a separate BLOB metadata TOC
entry for each large object (blob), but it did not touch the ancient
decision to put all the blobs' data into a single "BLOBS" TOC entry.
This is bad for a few reasons: for databases with millions of blobs,
the TOC becomes unreasonably large, causing performance issues;
selective restore of just some blobs is quite impossible; and we
cannot parallelize either dump or restore of the blob data, since our
architecture for that relies on farming out whole TOC entries to
worker processes.
To improve matters, let's group multiple blobs into each blob metadata
TOC entry, and then make corresponding per-group blob data TOC entries.
Selective restore using pg_restore's -l/-L switches is then possible,
though only at the group level. (Perhaps we should provide a switch
to allow forcing one-blob-per-group for users who need precise
selective restore and don't have huge numbers of blobs. This patch
doesn't do that, instead just hard-wiring the maximum number of blobs
per entry at 1000.)
The blobs in a group must all have the same owner, since the TOC entry
format only allows one owner to be named. In this implementation
we also require them to all share the same ACL (grants); the archive
format wouldn't require that, but pg_dump's representation of
DumpableObjects does. It seems unlikely that either restriction
will be problematic for databases with huge numbers of blobs.
The metadata TOC entries now have a "desc" string of "BLOB METADATA",
and their "defn" string is just a newline-separated list of blob OIDs.
The restore code has to generate creation commands, ALTER OWNER
commands, and drop commands (for --clean mode) from that. We would
need special-case code for ALTER OWNER and drop in any case, so the
alternative of keeping the "defn" as directly executable SQL code
for creation wouldn't buy much, and it seems like it'd bloat the
archive to little purpose.
Since we require the blobs of a metadata group to share the same ACL,
we can furthermore store only one copy of that ACL, and then make
pg_restore regenerate the appropriate commands for each blob. This
saves space in the dump file not only by removing duplicative SQL
command strings, but by not needing a separate TOC entry for each
blob's ACL. In turn, that reduces client-side memory requirements for
handling many blobs.
ACL TOC entries that need this special processing are labeled as
"ACL"/"LARGE OBJECTS nnn..nnn". If we have a blob with a unique ACL,
continue to label it as "ACL"/"LARGE OBJECT nnn". We don't actually
have to make such a distinction, but it saves a few cycles during
restore for the easy case, and it seems like a good idea to not change
the TOC contents unnecessarily.
The data TOC entries ("BLOBS") are exactly the same as before,
except that now there can be more than one, so we'd better give them
identifying tag strings.
Also, commit c0d5be5d6 put the new BLOB metadata TOC entries into
SECTION_PRE_DATA, which perhaps is defensible in some ways, but
it's a rather odd choice considering that we go out of our way to
treat blobs as data. Moreover, because parallel restore handles
the PRE_DATA section serially, this means we'd only get part of the
parallelism speedup we could hope for. Move these entries into
SECTION_DATA, letting us parallelize the lo_create calls not just the
data loading when there are many blobs. Add dependencies to ensure
that we won't try to load data for a blob we've not yet created.
As this stands, we still generate a separate TOC entry for any comment
or security label attached to a blob. I feel comfortable in believing
that comments and security labels on blobs are rare, so this patch
should be enough to get most of the useful TOC compression for blobs.
We have to bump the archive file format version number, since existing
versions of pg_restore wouldn't know they need to do something special
for BLOB METADATA, plus they aren't going to work correctly with
multiple BLOBS entries or multiple-large-object ACL entries.
The directory and tar-file format handlers need some work
for multiple BLOBS entries: they used to hard-wire the file name
as "blobs.toc", which is replaced here with "blobs_<dumpid>.toc".
The 002_pg_dump.pl test script also knows about that and requires
minor updates. (I had to drop the test for manually-compressed
blobs.toc files with LZ4, because lz4's obtuse command line
design requires explicit specification of the output file name
which seems impractical here. I don't think we're losing any
useful test coverage thereby; that test stanza seems completely
duplicative with the gzip and zstd cases anyway.)
In passing, centralize management of the lo_buf used to hold data
while restoring blobs. The code previously had each format handler
create lo_buf, which seems rather pointless given that the format
handlers all make it the same way. Moreover, the format handlers
never use lo_buf directly, making this setup a failure from a
separation-of-concerns standpoint. Let's move the responsibility into
pg_backup_archiver.c, which is the only module concerned with lo_buf.
The reason to do this in this patch is that it allows a centralized
fix for the now-false assumption that we never restore blobs in
parallel. Also, get rid of dead code in DropLOIfExists: it's been a
long time since we had any need to be able to restore to a pre-9.0
server.
Discussion: https://postgr.es/m/a9f9376f1c3343a6bb319dce294e20ac@EX13D05UWC001.ant.amazon.com
It's now possible to specify a table access method via
CREATE TABLE ... USING for a partitioned table, as well change it with
ALTER TABLE ... SET ACCESS METHOD. Specifying an AM for a partitioned
table lets the value be used for all future partitions created under it,
closely mirroring the behavior of the TABLESPACE option for partitioned
tables. Existing partitions are not modified.
For a partitioned table with no AM specified, any new partitions are
created with the default_table_access_method.
Also add ALTER TABLE ... SET ACCESS METHOD DEFAULT, which reverts to the
original state of using the default for new partitions.
The relcache of partitioned tables is not changed: rd_tableam is not
set, even if a partitioned table has a relam set.
Author: Justin Pryzby <pryzby@telsasoft.com>
Author: Soumyadeep Chakraborty <soumyadeep2007@gmail.com>
Author: Michaël Paquier <michael@paquier.xyz>
Reviewed-by: The authors themselves
Discussion: https://postgr.es/m/CAE-ML+9zM4wJCGCBGv01k96qQ3gFv4WFcFy=zqPHKeaEFwwv6A@mail.gmail.com
Discussion: https://postgr.es/m/20210308010707.GA29832%40telsasoft.com
Roles with MAINTAIN on a relation may run VACUUM, ANALYZE, REINDEX,
REFRESH MATERIALIZE VIEW, CLUSTER, and LOCK TABLE on the relation.
Roles with privileges of pg_maintain may run those same commands on
all relations.
This was previously committed for v16, but it was reverted in
commit 151c22deee due to concerns about search_path tricks that
could be used to escalate privileges to the table owner. Commits
2af07e2f74, 59825d1639, and c7ea3f4229 resolved these concerns by
restricting search_path when running maintenance commands.
Bumps catversion.
Reviewed-by: Jeff Davis
Discussion: https://postgr.es/m/20240305161235.GA3478007%40nathanxps13
Add WITHOUT OVERLAPS clause to PRIMARY KEY and UNIQUE constraints.
These are backed by GiST indexes instead of B-tree indexes, since they
are essentially exclusion constraints with = for the scalar parts of
the key and && for the temporal part.
Author: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+renyUApHgSZF9-nd-a0+OPGharLQLO=mDHcY4_qQ0+noCUVg@mail.gmail.com
There are a lot of Perl scripts in the tree, mostly code generation
and TAP tests. Occasionally, these scripts produce warnings. These
are probably always mistakes on the developer side (true positives).
Typical examples are warnings from genbki.pl or related when you make
a mess in the catalog files during development, or warnings from tests
when they massage a config file that looks different on different
hosts, or mistakes during merges (e.g., duplicate subroutine
definitions), or just mistakes that weren't noticed because there is a
lot of output in a verbose build.
This changes all warnings into fatal errors, by replacing
use warnings;
by
use warnings FATAL => 'all';
in all Perl files.
Discussion: https://www.postgresql.org/message-id/flat/06f899fd-1826-05ab-42d6-adeb1fd5e200%40eisentraut.org
If the underlying table isn't being dumped, it's useless to dump
an extended statistics object; it'll just cause errors at restore.
We have always applied similar policies to, say, indexes.
(When and if we get cross-table stats objects, it might be profitable
to think a little harder about what to do with them. But for now
there seems no point in considering a stats object as anything but
an appendage of its table.)
Rian McGuire and Tom Lane, per report from Rian McGuire.
Back-patch to supported branches.
Discussion: https://postgr.es/m/7075d3aa-3f05-44a5-b68f-47dc6a8a0550@buildkite.com
1) Remove useless entries from "unlike" lists. Runs that are not
listed in "like" don't need to be excluded in "unlike".
2) Ensure there is always a "like" list, even if it is empty. This
makes the test more self-documenting.
3) Use predefined lists such as %full_runs where appropriate, instead
of listing all runs separately.
Also add code that checks 1 and 2 automatically and dies with an error
for violations.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://www.postgresql.org/message-id/flat/1f8cb371-e84e-434e-0367-6b716fb16fa1@eisentraut.org
In a selective restore, ACLs for a table should be dumped if the
table is selected to be dumped. However, if the table has both
table-level and column-level ACLs, only the table-level ACL was
restored. This happened because _tocEntryRequired assumed that
an ACL could have only one dependency (the one on its table),
and punted if there was more than one. But since commit ea9125304,
column-level ACLs also depend on the table-level ACL if any, to
ensure correct ordering in parallel restores. To fix, adjust the
logic in _tocEntryRequired to ignore dependencies on ACLs.
I extended a test case in 002_pg_dump.pl so that it purports to
test for this; but in fact the test passes even without the fix.
That's because this bug only manifests during a selective restore,
while the scenarios 002_pg_dump.pl tests include only selective dumps.
Perhaps somebody would like to extend the script so that it can test
scenarios including selective restore, but I'm not touching that.
Euler Taveira and Tom Lane, per report from Kong Man.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/DM4PR11MB73976902DBBA10B1D652F9498B06A@DM4PR11MB7397.namprd11.prod.outlook.com
For some reason I used not_like = { pg_dumpall_dbprivs => 1, } in the test
condition of one of the tests added in in c66a7d75e6. That doesn't make sense
for two reasons: 1) not_like isn't a valid test condition 2) the database
should not be dumped in any of the tests. Due to 1), the test achieved its
goal, but clearly the formulation is confusing. Instead use like => {}, with
a comment explaining why.
Reported-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/3ddf79f2-8b7b-a093-11d2-5c739bc64f86@eisentraut.org
Backpatch: 11-, like c66a7d75e6
We now create contype='n' pg_constraint rows for not-null constraints.
We propagate these constraints to other tables during operations such as
adding inheritance relationships, creating and attaching partitions and
creating tables LIKE other tables. We also spawn not-null constraints
for inheritance child tables when their parents have primary keys.
These related constraints mostly follow the well-known rules of
conislocal and coninhcount that we have for CHECK constraints, with some
adaptations: for example, as opposed to CHECK constraints, we don't
match not-null ones by name when descending a hierarchy to alter it,
instead matching by column name that they apply to. This means we don't
require the constraint names to be identical across a hierarchy.
For now, we omit them for system catalogs. Maybe this is worth
reconsidering. We don't support NOT VALID nor DEFERRABLE clauses
either; these can be added as separate features later (this patch is
already large and complicated enough.)
psql shows these constraints in \d+.
pg_dump requires some ad-hoc hacks, particularly when dumping a primary
key. We now create one "throwaway" not-null constraint for each column
in the PK together with the CREATE TABLE command, and once the PK is
created, all those throwaway constraints are removed. This avoids
having to check each tuple for nullness when the dump restores the
primary key creation.
pg_upgrading from an older release requires a somewhat brittle procedure
to create a constraint state that matches what would be created if the
database were being created fresh in Postgres 17. I have tested all the
scenarios I could think of, and it works correctly as far as I can tell,
but I could have neglected weird cases.
This patch has been very long in the making. The first patch was
written by Bernd Helmle in 2010 to add a new pg_constraint.contype value
('n'), which I (Álvaro) then hijacked in 2011 and 2012, until that one
was killed by the realization that we ought to use contype='c' instead:
manufactured CHECK constraints. However, later SQL standard
development, as well as nonobvious emergent properties of that design
(mostly, failure to distinguish them from "normal" CHECK constraints as
well as the performance implication of having to test the CHECK
expression) led us to reconsider this choice, so now the current
implementation uses contype='n' again. During Postgres 16 this had
already been introduced by commit e056c557ae, but there were some
problems mainly with the pg_upgrade procedure that couldn't be fixed in
reasonable time, so it was reverted.
In 2016 Vitaly Burovoy also worked on this feature[1] but found no
consensus for his proposed approach, which was claimed to be closer to
the letter of the standard, requiring an additional pg_attribute column
to track the OID of the not-null constraint for that column.
[1] https://postgr.es/m/CAKOSWNkN6HSyatuys8xZxzRCR-KL1OkHS5-b9qd9bf1Rad3PLA@mail.gmail.com
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Author: Bernd Helmle <mailings@oopsware.de>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
In-place tablespaces would be dumped with the path produced by
pg_tablespace_location(), which is in this case a relative path built as
pg_tblspc/OID, but this would fail to restore as such tablespaces need
to use an empty string as location. In order to detect if an in-place
tablespace is used, this commit checks if the path returned is relative
and adapts the dump contents in consequence.
Like the other changes related to in-place tablespaces, no backpatch is
done as these are only intended for development purposes. Rui Zhao has
fixed the code, while the test is from me.
Author: Rui Zhao, Michael Paquier
Discussion: https://postgr.es/m/80c80b4a-b87b-456f-bd46-1ae326601d79.xiyuan.zr@alibaba-inc.com
Until now, when DROP DATABASE got interrupted in the wrong moment, the removal
of the pg_database row would also roll back, even though some irreversible
steps have already been taken. E.g. DropDatabaseBuffers() might have thrown
out dirty buffers, or files could have been unlinked. But we continued to
allow connections to such a corrupted database.
To fix this, mark databases invalid with an in-place update, just before
starting to perform irreversible steps. As we can't add a new column in the
back branches, we use pg_database.datconnlimit = -2 for this purpose.
An invalid database cannot be connected to anymore, but can still be
dropped.
Unfortunately we can't easily add output to psql's \l to indicate that some
database is invalid, it doesn't fit in any of the existing columns.
Add tests verifying that a interrupted DROP DATABASE is handled correctly in
the backend and in various tools.
Reported-by: Evgeny Morozov <postgresql3@realityexists.net>
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20230509004637.cgvmfwrbht7xm7p6@awork3.anarazel.de
Discussion: https://postgr.es/m/20230314174521.74jl6ffqsee5mtug@awork3.anarazel.de
Backpatch: 11-, bug present in all supported versions
A new-style SQL function can contain a parse-time dependency
on a unique index, much as views and matviews can (such cases
arise from GROUP BY and ON CONFLICT clauses, for example).
To dump and restore such a function successfully, pg_dump must
postpone the function until after the unique index is created,
which will happen in the post-data part of the dump. Therefore
we have to remove the normal constraint that functions are
dumped in pre-data. Add code similar to the existing logic
that handles this for matviews. I added test cases for both
as well, since code coverage tests showed that we weren't
testing the matview logic.
Per report from Sami Imseih. Back-patch to v14 where
new-style SQL functions came in.
Discussion: https://postgr.es/m/2C1933AB-C2F8-499B-9D18-4AC1882256A0@amazon.com
Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/20230428092545.qfb3y5wcu4cm75ur@alvherre.pgsql
LZ4File_write() did not advance the input pointer on subsequent invocations of
LZ4F_compressUpdate(). As a result the generated compressed output would be a
compressed version of the same input chunk.
Tests failed to catch this error because the data would comfortably fit
within the default buffer size, as a single chunk. Tests have been added
to provide adequate coverage of multi-chunk compression.
WriteDataToArchiveLZ4() which is also using LZ4F_compressUpdate() did
not suffer from this omission.
Author: Georgios Kokolatos <gkokolatos@pm.me>
Reported-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/ZFhCyn4Gm2eu60rB%40paquier.xyz
This reverts commit e056c557ae and minor later fixes thereof.
There's a few problems in this new feature -- most notably regarding
pg_upgrade behavior, but others as well. This new feature is not in any
way critical on its own, so instead of scrambling to fix it we revert it
and try again in early 17 with these issues in mind.
Discussion: https://postgr.es/m/3801207.1681057430@sss.pgh.pa.us
We now create pg_constaint rows for NOT NULL constraints with
contype='n'.
We propagate these constraints during operations such as adding
inheritance relationships, creating and attaching partitions, creating
tables LIKE other tables. We mostly follow the well-known rules of
conislocal and coninhcount that we have for CHECK constraints, with some
adaptations; for example, as opposed to CHECK constraints, we don't
match NOT NULL ones by name when descending a hierarchy to alter it;
instead we match by column number. This means we don't require the
constraint names to be identical across a hierarchy.
For now, we omit them from system catalogs. Maybe this is worth
reconsidering. We don't support NOT VALID nor DEFERRABLE clauses
either; these can be added as separate features later (this patch is
already large and complicated enough.)
This has been very long in the making. The first patch was written by
Bernd Helmle in 2010 to add a new pg_constraint.contype value ('n'),
which I (Álvaro) then hijacked in 2011 and 2012, until that one was
killed by the realization that we ought to use contype='c' instead:
manufactured CHECK constraints. However, later SQL standard
development, as well as nonobvious emergent properties of that design
(mostly, failure to distinguish them from "normal" CHECK constraints as
well as the performance implication of having to test the CHECK
expression) led us to reconsider this choice, so now the current
implementation uses contype='n' again.
In 2016 Vitaly Burovoy also worked on this feature[1] but found no
consensus for his proposed approach, which was claimed to be closer to
the letter of the standard, requiring additional pg_attribute columns to
track the OID of the NOT NULL constraint for that column.
[1] https://postgr.es/m/CAKOSWNkN6HSyatuys8xZxzRCR-KL1OkHS5-b9qd9bf1Rad3PLA@mail.gmail.com
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Author: Bernd Helmle <mailings@oopsware.de>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/CACA0E642A0267EDA387AF2B%40%5B172.26.14.62%5D
Discussion: https://postgr.es/m/AANLkTinLXMOEMz+0J29tf1POokKi4XDkWJ6-DDR9BKgU@mail.gmail.com
Discussion: https://postgr.es/m/20110707213401.GA27098@alvh.no-ip.org
Discussion: https://postgr.es/m/1343682669-sup-2532@alvh.no-ip.org
Discussion: https://postgr.es/m/CAKOSWNkN6HSyatuys8xZxzRCR-KL1OkHS5-b9qd9bf1Rad3PLA@mail.gmail.com
Discussion: https://postgr.es/m/20220817181249.q7qvj3okywctra3c@alvherre.pgsql
zstd compression supports a special mode for finding matched in distant
past, which may result in better compression ratio, at the expense of
using more memory (the window size is 128MB).
To enable this optional mode, use the "long" keyword when specifying the
compression method (--compress=zstd:long).
Author: Justin Pryzby
Reviewed-by: Tomas Vondra, Jacob Champion
Discussion: https://postgr.es/m/20230224191840.GD1653@telsasoft.com
Discussion: https://postgr.es/m/20220327205020.GM28503@telsasoft.com
Allow pg_dump to use the zstd compression, in addition to gzip/lz4. Bulk
of the new compression method is implemented in compress_zstd.{c,h},
covering the pg_dump compression APIs. The rest of the patch adds test
and makes various places aware of the new compression method.
The zstd library (which this patch relies on) supports multithreaded
compression since version 1.5. We however disallow that feature for now,
as it might interfere with parallel backups on platforms that rely on
threads (e.g. Windows). This can be improved / relaxed in the future.
This also fixes a minor issue in InitDiscoverCompressFileHandle(), which
was not updated to check if the file already has the .lz4 extension.
Adding zstd compression was originally proposed in 2020 (see the second
thread), but then was reworked to use the new compression API introduced
in e9960732a9. I've considered both threads when compiling the list of
reviewers.
Author: Justin Pryzby
Reviewed-by: Tomas Vondra, Jacob Champion, Andreas Karlsson
Discussion: https://postgr.es/m/20230224191840.GD1653@telsasoft.com
Discussion: https://postgr.es/m/20201221194924.GI30237@telsasoft.com
Convert to BCP47 language tags before storing in the catalog, except
during binary upgrade or when the locale comes from an existing
collation or template database.
The resulting language tags can vary slightly between ICU
versions. For instance, "@colBackwards=yes" is converted to
"und-u-kb-true" in older versions of ICU, and to the simpler (but
equivalent) "und-u-kb" in newer versions.
The process of canonicalizing to a language tag also understands more
input locale string formats than ucol_open(). For instance,
"fr_CA.UTF-8" is misinterpreted by ucol_open() and the region is
ignored; effectively treating it the same as the locale "fr" and
opening the wrong collator. Canonicalization properly interprets the
language and region, resulting in the language tag "fr-CA", which can
then be understood by ucol_open().
This commit fixes a problem in prior versions due to ucol_open()
misinterpreting locale strings as described above. For instance,
creating an ICU collation with locale "fr_CA.UTF-8" would store that
string directly in the catalog, which would later be passed to (and
misinterpreted by) ucol_open(). After this commit, the locale string
will be canonicalized to language tag "fr-CA" in the catalog, which
will be properly understood by ucol_open(). Because this fix affects
the resulting collator, we cannot change the locale string stored in
the catalog for existing databases or collations; otherwise we'd risk
corrupting indexes. Therefore, only canonicalize locales for
newly-created (not upgraded) collations/databases. For similar
reasons, do not backport.
Discussion: https://postgr.es/m/8c7af6820aed94dc7bc259d2aa7f9663518e6137.camel@j-davis.com
Reviewed-by: Peter Eisentraut
The pg_dump Compressor API has three basic callbacks - Allocate, Write
and End. The gzip implementation (since e9960732a) wrongly assumed the
Write function would always be called, and deferred the initialization
of the internal compression system until the first such call. But when
there's no data to compress (e.g. for empty LO), this would result in
not finalizing the compression state (because it was not actually
initialized), producing invalid dump.
Fixed by initializing the internal compression system in the Allocate
call, whenever the caller provides the Write. For decompression the
state is not needed, so we leave the private_data member unpopulated.
Introduces a pg_dump TAP test compressing an empty large object.
This also rearranges the functions to their original order, to make
diffs against older code simpler to understand. Finally, replace an
unreachable pg_fatal() with a simple assert check.
Reported-by: Justin Pryzby
Author: Justin Pryzby, Georgios Kokolatos
Reviewed-by: Georgios Kokolatos, Tomas Vondra
https://postgr.es/m/20230228235834.GC30529%40telsasoft.com
This patch adds new pg_dump switches
--table-and-children=pattern
--exclude-table-and-children=pattern
--exclude-table-data-and-children=pattern
which act the same as the existing --table, --exclude-table, and
--exclude-table-data switches, except that any partitions or
inheritance child tables of the table(s) matching the pattern
are also included or excluded.
Gilles Darold, reviewed by Stéphane Tachoires
Discussion: https://postgr.es/m/5aa393b5-5f67-8447-b83e-544516990ee2@migops.com
Expand pg_dump's compression streaming and file APIs to support the lz4
algorithm. The newly added compress_lz4.{c,h} files cover all the
functionality of the aforementioned APIs. Minor changes were necessary
in various pg_backup_* files, where code for the 'lz4' file suffix has
been added, as well as pg_dump's compression option parsing.
Author: Georgios Kokolatos
Reviewed-by: Michael Paquier, Rachel Heaton, Justin Pryzby, Shi Yu, Tomas Vondra
Discussion: https://postgr.es/m/faUNEOpts9vunEaLnmxmG-DldLSg_ql137OC3JYDmgrOMHm1RvvWY2IdBkv_CRxm5spCCb_OmKNk2T03TMm0fBEWveFF9wA1WizPuAgB7Ss%3D%40protonmail.com
Switch pg_dump to use the Compression API, implemented by bf9aa490db.
The CompressFileHandle replaces the cfp* family of functions with a
struct of callbacks for accessing (compressed) files. This allows adding
new compression methods simply by introducing a new struct instance with
appropriate implementation of the callbacks.
Archives compressed using custom compression methods store an identifier
of the compression algorithm in their header instead of the compression
level. The header version is bumped.
Author: Georgios Kokolatos
Reviewed-by: Michael Paquier, Rachel Heaton, Justin Pryzby, Tomas Vondra
Discussion: https://postgr.es/m/faUNEOpts9vunEaLnmxmG-DldLSg_ql137OC3JYDmgrOMHm1RvvWY2IdBkv_CRxm5spCCb_OmKNk2T03TMm0fBEWveFF9wA1WizPuAgB7Ss%3D%40protonmail.com
The rule system needs "old" and/or "new" pseudo-RTEs in rule actions
that are ON INSERT/UPDATE/DELETE. Historically it's put such entries
into the ON SELECT rules of views as well, but those are really quite
vestigial. The only thing we've used them for is to carry the
view's relid forward to AcquireExecutorLocks (so that we can
re-lock the view to verify it hasn't changed before re-using a plan)
and to carry its relid and permissions data forward to execution-time
permissions checks. What we can do instead of that is to retain
these fields of the RTE_RELATION RTE for the view even after we
convert it to an RTE_SUBQUERY RTE. This requires a tiny amount of
extra complication in the planner and AcquireExecutorLocks, but on
the other hand we can get rid of the logic that moves that data from
one place to another.
The principal immediate benefit of doing this, aside from a small
saving in the pg_rewrite data for views, is that these pseudo-RTEs
no longer trigger ruleutils.c's heuristic about qualifying variable
names when the rangetable's length is more than 1. That results
in quite a number of small simplifications in regression test outputs,
which are all to the good IMO.
Bump catversion because we need to dump a few more fields of
RTE_SUBQUERY RTEs. While those will always be zeroes anyway in
stored rules (because we'd never populate them until query rewrite)
they are useful for debugging, and it seems like we'd better make
sure to transmit such RTEs accurately in plans sent to parallel
workers. I don't think the executor actually examines these fields
after startup, but someday it might.
This is a second attempt at committing 1b4d280ea. The difference
from the first time is that now we can add some filtering rules to
AdjustUpgrade.pm to allow cross-version upgrade testing to pass
despite all the cosmetic changes in CREATE VIEW outputs.
Amit Langote (filtering rules by me)
Discussion: https://postgr.es/m/CA+HiwqEf7gPN4Hn+LoZ4tP2q_Qt7n3vw7-6fJKOf92tSEnX6Gg@mail.gmail.com
Discussion: https://postgr.es/m/891521.1673657296@sss.pgh.pa.us
This reverts commit 1b4d280ea1.
It's broken the buildfarm members that run cross-version-upgrade tests,
because they're not prepared to deal with cosmetic differences between
CREATE VIEW commands emitted by older servers and HEAD. Even if we had
a solution to that, which we don't, it'd take some time to roll it out
to the affected animals. This improvement isn't valuable enough to
justify addressing that problem on an emergency basis, so revert it
for now.
The rule system needs "old" and/or "new" pseudo-RTEs in rule actions
that are ON INSERT/UPDATE/DELETE. Historically it's put such entries
into the ON SELECT rules of views as well, but those are really quite
vestigial. The only thing we've used them for is to carry the
view's relid forward to AcquireExecutorLocks (so that we can
re-lock the view to verify it hasn't changed before re-using a plan)
and to carry its relid and permissions data forward to execution-time
permissions checks. What we can do instead of that is to retain
these fields of the RTE_RELATION RTE for the view even after we
convert it to an RTE_SUBQUERY RTE. This requires a tiny amount of
extra complication in the planner and AcquireExecutorLocks, but on
the other hand we can get rid of the logic that moves that data from
one place to another.
The principal immediate benefit of doing this, aside from a small
saving in the pg_rewrite data for views, is that these pseudo-RTEs
no longer trigger ruleutils.c's heuristic about qualifying variable
names when the rangetable's length is more than 1. That results
in quite a number of small simplifications in regression test outputs,
which are all to the good IMO.
Bump catversion because we need to dump a few more fields of
RTE_SUBQUERY RTEs. While those will always be zeroes anyway in
stored rules (because we'd never populate them until query rewrite)
they are useful for debugging, and it seems like we'd better make
sure to transmit such RTEs accurately in plans sent to parallel
workers. I don't think the executor actually examines these fields
after startup, but someday it might.
Amit Langote
Discussion: https://postgr.es/m/CA+HiwqEf7gPN4Hn+LoZ4tP2q_Qt7n3vw7-6fJKOf92tSEnX6Gg@mail.gmail.com
By default, the contents generated by the custom and directory dump
formats are compressed. However, with the existing test facility, the
restore program will succeed regardless of whether the dumped output was
compressed or not without checking if anything has been compressed.
This commit implements a portable way to check the contents of the
custom and directory dump formats:
- glob_patterns, that can be defined for each test as an array of
glob()-compilable strings, tracking the contents that should or should
not be compressed. While this is useful to make sure that the table
data is compressed, this also checks that blobs.toc and toc.dat are
never compressed.
- command_like, to execute a command on a dump and check its generated
output. This is used here in correlation with pg_restore -l to check if
the dumps have been compressed or not, depending on if the build
supports gzip, or not.
This hole in the tests has come up when working on 5e73a60, where
compression has to be applied by default, if available, for both dump
formats.
The idea of glob_patterns comes from me, and Georgios has come up with
the design for command_like.
Author: Georgios Kokolatos, Michael Paquier
Discussion: https://postgr.es/m/DQn4czCWR1rcbGPLL7p3LfEr5-kGmlySm-H05VgroINdikvhtS5r9EdI6b8D8sjnbKdJ09k-cxs2AqijBeHAWk9Q8gvEAxPRHuLRhwONcGc=@pm.me
For historical reasons, pg_dump refers to large objects as "BLOBs".
This term is not used anywhere else in PostgreSQL, and it also means
something different in the SQL standard and other SQL systems.
This patch renames internal functions, code comments, documentation,
etc. to use the "large object" or "LO" terminology instead. There is
no functionality change, so the archive format still uses the name
"BLOB" for the archive entry. Additional long command-line options
are added with the new naming.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://www.postgresql.org/message-id/flat/868a381f-4650-9460-1726-1ffd39a270b4%40enterprisedb.com
Compression specifications are currently used by pg_basebackup and
pg_receivewal, and are able to let the user control in an extended way
the method and level of compression used. As an effect of this commit,
pg_dump's -Z/--compress is now able to use more than just an integer, as
of the grammar "method[:detail]".
The method can be either "none" or "gzip", and can optionally take a
detail string. If the detail string is only an integer, it defines the
compression level. A comma-separated list of keywords can also be used
method allows for more options, the only keyword supported now is
"level".
The change is backward-compatible, hence specifying only an integer
leads to no compression for a level of 0 and gzip compression when the
level is greater than 0.
Most of the code changes are straight-forward, as pg_dump was relying on
an integer tracking the compression level to check for gzip or no
compression. These are changed to use a compression specification and
the algorithm stored in it.
As of this change, note that the dump format is not bumped because there
is no need yet to track the compression algorithm in the TOC entries.
Hence, we still rely on the compression level to make the difference
when reading them. This will be mandatory once a new compression method
is added, though.
In order to keep the code simpler when parsing the compression
specification, the code is changed so as pg_dump now fails hard when
using gzip on -Z/--compress without its support compiled, rather than
enforcing no compression without the user knowing about it except
through a warning. Like before this commit, archive and custom formats
are compressed by default when the code is compiled with gzip, and left
uncompressed without gzip.
Author: Georgios Kokolatos
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/O4mutIrCES8ZhlXJiMvzsivT7ztAMja2lkdL1LJx6O5f22I2W8PBIeLKz7mDLwxHoibcnRAYJXm1pH4tyUNC4a8eDzLn22a6Pb1S74Niexg=@pm.me
Currently a table can only be vacuumed or analyzed by its owner or
a superuser. This can now be extended to any user by means of an
appropriate GRANT.
Nathan Bossart
Reviewed by: Bharath Rupireddy, Kyotaro Horiguchi, Stephen Frost, Robert
Haas, Mark Dilger, Tom Lane, Corey Huinker, David G. Johnston, Michael
Paquier.
Discussion: https://postgr.es/m/20220722203735.GB3996698@nathanxps13
When the pg_dump 002_pg_dump.pl test generates the command to load the
schema, it does
# Add terminating semicolon
$create_sql{$test_db} .= $tests{$test}->{create_sql} . ";";
In some cases, this creates a duplicate semicolon, but more
importantly, this doesn't add any newline. So if you look at the
result in either the server log or in
tmp_check/log/regress_log_002_pg_dump, it looks like a complete mess.
This patch makes the output look cleaner for manual inspection: add
semicolon only if necessary, and add two newlines.
Discussion: https://www.postgresql.org/message-id/flat/d6aec95a-8729-43cc-2578-f2a5e46640e0%40enterprisedb.com
We previously thought that allowing such cases can confuse users when they
specify DROP TABLES IN SCHEMA but that doesn't seem to be the case based
on discussion. This helps to uplift the restriction during
ALTER TABLE ... SET SCHEMA which used to ensure that we couldn't end up
with a publication having both a schema and the same schema's table.
To allow this, we need to forbid having any schema on a publication if
column lists on a table are specified (and vice versa). This is because
otherwise we still need a restriction during ALTER TABLE ... SET SCHEMA to
forbid cases where it could lead to a publication having both a schema and
the same schema's table with column list.
Based on suggestions by Peter Eisentraut.
Author: Hou Zhijie and Vignesh C
Reviewed-By: Peter Smith, Amit Kapila
Backpatch-through: 15, where it was introduced
Discussion: https://postgr.es/m/2729c9e2-9aac-8cda-f2f4-34f2bcc18f4e@enterprisedb.com
This may be a bit too subtle, but removing that word from there makes
this clause no longer a perfect parallel of the GRANT variant "ALL
TABLES IN SCHEMA": indeed, for publications what we record is the schema
itself, not the tables therein, which means that any tables added to the
schema in the future are also published. This is completely different
to what GRANT does, which is affect only the tables that exist when the
command is executed.
There isn't resounding support for this change, but there are a few
positive votes and no opposition. Because the time to 15 RC1 is very
short, let's get this out now.
Backpatch to 15.
Discussion: https://postgr.es/m/2729c9e2-9aac-8cda-f2f4-34f2bcc18f4e
This patch adds a new SUBSCRIPTION parameter "origin". It specifies
whether the subscription will request the publisher to only send changes
that don't have an origin or send changes regardless of origin. Setting it
to "none" means that the subscription will request the publisher to only
send changes that have no origin associated. Setting it to "any" means
that the publisher sends changes regardless of their origin. The default
is "any".
Usage:
CREATE SUBSCRIPTION sub1 CONNECTION 'dbname=postgres port=9999'
PUBLICATION pub1 WITH (origin = none);
This can be used to avoid loops (infinite replication of the same data)
among replication nodes.
This feature allows filtering only the replication data originating from
WAL but for initial sync (initial copy of table data) we don't have such a
facility as we can only distinguish the data based on origin from WAL. As
a follow-up patch, we are planning to forbid the initial sync if the
origin is specified as none and we notice that the publication tables were
also replicated from other publishers to avoid duplicate data or loops.
We forbid to allow creating origin with names 'none' and 'any' to avoid
confusion with the same name options.
Author: Vignesh C, Amit Kapila
Reviewed-By: Peter Smith, Amit Kapila, Dilip Kumar, Shi yu, Ashutosh Bapat, Hayato Kuroda
Discussion: https://postgr.es/m/CALDaNm0gwjY_4HFxvvty01BOT01q_fJLKQ3pWP9=9orqubhjcQ@mail.gmail.com