Previously, all heaps had FSMs. For very small tables, this means that the
FSM took up more space than the heap did. This is wasteful, so now we
refrain from creating the FSM for heaps with 4 pages or fewer. If the last
known target block has insufficient space, we still try to insert into some
other page before giving up and extending the relation, since doing
otherwise leads to table bloat. Testing showed that trying every page
penalized performance slightly, so we compromise and try every other page.
This way, we visit at most two pages. Any pages with wasted free space
become visible at next relation extension, so we still control table bloat.
As a bonus, directly attempting one or two pages can even be faster than
consulting the FSM would have been.
Once the FSM is created for a heap we don't remove it even if somebody
deletes all the rows from the corresponding relation. We don't think it is
a useful optimization as it is quite likely that relation will again grow
to the same size.
Author: John Naylor, Amit Kapila
Reviewed-by: Amit Kapila
Tested-by: Mithun C Y
Discussion: https://www.postgresql.org/message-id/CAJVSVGWvB13PzpbLEecFuGFc5V2fsO736BsdTakPiPAcdMM5tQ@mail.gmail.com
Add PG_CFLAGS, PG_CXXFLAGS, and PG_LDFLAGS variables to pgxs.mk which
will be appended or prepended to the corresponding make variables.
Notably, there was previously no way to pass custom CXXFLAGS to third
party extension module builds, COPT and PROFILE supporting only CFLAGS
and LDFLAGS.
Backpatch all the way down to ease integration with existing
extensions.
Author: Christoph Berg
Reviewed-by: Andres Freund, Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/20181113104005.GA32154@msg.credativ.de
Backpatch-through: 9.4
The documentation includes sections to be able to initialize and start
Postgres via a couple of commands. Some of its recommendations involve
using directly "postgres", which is inconsistent with the recommendation
given by initdb. At the same time make some other command calls more
consistent with the rest, by using an absolute path when creating a
database.
Author: Andreas Scherbaum
Reviewed-by: Michael Banck, Ryan Lambert
These two new options can be used to improve the selectivity of
relations to vacuum or analyze even further depending on the age of
respectively their transaction ID or multixact ID, so as it is possible
to prioritize tables to prevent wraparound of one or the other.
Combined with --table, it is possible to target a subset of tables to
choose as potential processing targets.
Author: Nathan Bossart
Reviewed-by: Michael Paquier, Masahiko Sawada
Discussion: https://postgr.es/m/FFE5373C-E26A-495B-B5C8-911EC4A41C5E@amazon.com
Previously, all heaps had FSMs. For very small tables, this means that the
FSM took up more space than the heap did. This is wasteful, so now we
refrain from creating the FSM for heaps with 4 pages or fewer. If the last
known target block has insufficient space, we still try to insert into some
other page before giving up and extending the relation, since doing
otherwise leads to table bloat. Testing showed that trying every page
penalized performance slightly, so we compromise and try every other page.
This way, we visit at most two pages. Any pages with wasted free space
become visible at next relation extension, so we still control table bloat.
As a bonus, directly attempting one or two pages can even be faster than
consulting the FSM would have been.
Once the FSM is created for a heap we don't remove it even if somebody
deletes all the rows from the corresponding relation. We don't think it is
a useful optimization as it is quite likely that relation will again grow
to the same size.
Author: John Naylor with design inputs and some code contribution by Amit Kapila
Reviewed-by: Amit Kapila
Tested-by: Mithun C Y
Discussion: https://www.postgresql.org/message-id/CAJVSVGWvB13PzpbLEecFuGFc5V2fsO736BsdTakPiPAcdMM5tQ@mail.gmail.com
Before this change FunctionCallInfoData, the struct arguments etc for
V1 function calls are stored in, always had space for
FUNC_MAX_ARGS/100 arguments, storing datums and their nullness in two
arrays. For nearly every function call 100 arguments is far more than
needed, therefore wasting memory. Arg and argnull being two separate
arrays also guarantees that to access a single argument, two
cachelines have to be touched.
Change the layout so there's a single variable-length array with pairs
of value / isnull. That drastically reduces memory consumption for
most function calls (on x86-64 a two argument function now uses
64bytes, previously 936 bytes), and makes it very likely that argument
value and its nullness are on the same cacheline.
Arguments are stored in a new NullableDatum struct, which, due to
padding, needs more memory per argument than before. But as usually
far fewer arguments are stored, and individual arguments are cheaper
to access, that's still a clear win. It's likely that there's other
places where conversion to NullableDatum arrays would make sense,
e.g. TupleTableSlots, but that's for another commit.
Because the function call information is now variable-length
allocations have to take the number of arguments into account. For
heap allocations that can be done with SizeForFunctionCallInfoData(),
for on-stack allocations there's a new LOCAL_FCINFO(name, nargs) macro
that helps to allocate an appropriately sized and aligned variable.
Some places with stack allocation function call information don't know
the number of arguments at compile time, and currently variably sized
stack allocations aren't allowed in postgres. Therefore allow for
FUNC_MAX_ARGS space in these cases. They're not that common, so for
now that seems acceptable.
Because of the need to allocate FunctionCallInfo of the appropriate
size, older extensions may need to update their code. To avoid subtle
breakages, the FunctionCallInfoData struct has been renamed to
FunctionCallInfoBaseData. Most code only references FunctionCallInfo,
so that shouldn't cause much collateral damage.
This change is also a prerequisite for more efficient expression JIT
compilation (by allocating the function call information on the stack,
allowing LLVM to optimize it away); previously the size of the call
information caused problems inside LLVM's optimizer.
Author: Andres Freund
Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/20180605172952.x34m5uz6ju6enaem@alap3.anarazel.de
Previously, \g would successfully execute the COPY command, but
the target specification if any was ignored, so that the data was
always dumped to the regular query output target. This seems like
a clear bug, so let's not just fix it but back-patch it.
While at it, adjust the documentation for \copy to recommend
"COPY ... TO STDOUT \g foo" as a plausible alternative.
Back-patch to 9.5. The problem exists much further back, but the
code associated with \g was refactored enough in 9.5 that we'd
need a significantly different patch for 9.4, and it doesn't
seem worth the trouble.
Daniel Vérité, reviewed by Fabien Coelho
Discussion: https://postgr.es/m/15dadc39-e050-4d46-956b-dcc4ed098753@manitou-mail.org
Since LISTEN is (still) disallowed, UNLISTEN must be a no-op in a
hot-standby session, and so there's no harm in allowing it. This
change allows client code to not worry about whether it's connected
to a primary or standby server when performing session-state-reset
type activities. (Note that DISCARD ALL, which includes UNLISTEN,
was already allowed, making it inconsistent to reject UNLISTEN.)
Per discussion, back-patch to all supported versions.
Shay Rojansky, reviewed by Mi Tar
Discussion: https://postgr.es/m/CADT4RqCf2gA_TJtPAjnGzkC3ZiexfBZiLmA-mV66e4UyuVv8bA@mail.gmail.com
Previously, only literals were allowed. This change allows general
expressions, including functions calls, which are evaluated at the
time the DDL command is executed.
Besides offering some more functionality, it simplifies the parser
structures and removes some inconsistencies in how the literals were
handled.
Author: Kyotaro Horiguchi, Tom Lane, Amit Langote
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/9f88b5e0-6da2-5227-20d0-0d7012beaa1c@lab.ntt.co.jp/
The pgbench regression test supposed that srandom() with a specific value
would result in deterministic output from random(), as required by POSIX.
It emerges however that OpenBSD is too smart to be constrained by mere
standards, so their random() emits nondeterministic output anyway.
While a workaround does exist, what seems like a better fix is to stop
relying on the platform's srandom()/random() altogether, so that what
you get from --random-seed=N is not merely deterministic but platform
independent. Hence, use a separate pg_jrand48() random sequence in
place of random().
Also adjust the regression test case that's supposed to detect
nondeterminism so that it's more likely to detect it; the original
choice of random_zipfian parameter tended to produce the same output
all the time even if the underlying behavior wasn't deterministic.
In passing, improve pgbench's docs about random_zipfian().
Back-patch to v11 where this code was introduced.
Fabien Coelho and Tom Lane
Discussion: https://postgr.es/m/4615.1547792324@sss.pgh.pa.us
Extends the COPY FROM command with a WHERE condition, which allows doing
various types of filtering while importing the data (random sampling,
condition on a data column, etc.). Until now such filtering required
either preprocessing of the input data, or importing all data and then
filtering in the database. COPY FROM ... WHERE is an easy-to-use and
low-overhead alternative for most simple cases.
Author: Surafel Temesgen
Reviewed-by: Tomas Vondra, Masahiko Sawada, Lim Myungkyu
Discussion: https://www.postgresql.org/message-id/flat/CALAY4q_DdpWDuB5-Zyi-oTtO2uSk8pmy+dupiRe3AvAc++1imA@mail.gmail.com
Commit c0d0e54084 replaced the ones in the documentation, but missed out
on the ones in the code. Replace those as well, but unlike c0d0e54084,
don't backpatch the code changes to avoid breaking translations.
Attempting to use a temporary table within a two-phase transaction is
forbidden for ages. However, there have been uncovered grounds for
a couple of other object types and commands which work on temporary
objects with two-phase commit. In short, trying to create, lock or drop
an object on a temporary schema should not be authorized within a
two-phase transaction, as it would cause its state to create
dependencies with other sessions, causing all sorts of side effects with
the existing session or other sessions spawned later on trying to use
the same temporary schema name.
Regression tests are added to cover all the grounds found, the original
report mentioned function creation, but monitoring closer there are many
other patterns with LOCK, DROP or CREATE EXTENSION which are involved.
One of the symptoms resulting in combining both is that the session
which used the temporary schema is not able to shut down completely,
waiting for being able to drop the temporary schema, something that it
cannot complete because of the two-phase transaction involved with
temporary objects. In this case the client is able to disconnect but
the session remains alive on the backend-side, potentially blocking
connection backend slots from being used. Other problems reported could
also involve server crashes.
This is back-patched down to v10, which is where 9b013dc has introduced
MyXactFlags, something that this patch relies on.
Reported-by: Alexey Bashtanov
Author: Michael Paquier
Reviewed-by: Masahiko Sawada
Discussion: https://postgr.es/m/5d910e2e-0db8-ec06-dd5f-baec420513c3@imap.cc
Backpatch-through: 10
These have been found while cross-checking for the use of unique words
in the documentation, and a wait event was not getting generated in a way
consistent to what the documentation provided.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/9b5a3a85-899a-ae62-dbab-1e7943aa5ab1@gmail.com
With the previous rule, if pandoc was missing, a zero-length output
file would be created without an error from make. To improve that,
write the rule as two separate commands without a pipe.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Since approximately PostgreSQL 10, it is no longer required that
environment variables at installation time such as PERL, PYTHON, TCLSH
be "full path names", so change that phrasing in the installation
instructions. (The exact time of change appears to differ for PERL
and the others, but it works consistently in PostgreSQL 10.)
Also while we're here document the defaults for PERL and PYTHON, but
since the search list for TCLSH is so long, let's leave that out so we
don't need to maintain a copy of that list in the installation
instructions.
This value represents the default behavior of using the current
timeline. Previously, this was represented by an empty string.
(Before the removal of recovery.conf, this setting could not be chosen
explicitly but was used when recovery_target_timeline was not
mentioned at all.)
Discussion: https://www.postgresql.org/message-id/flat/6dd2c23a-4162-8469-410f-bfe146e28c0c@2ndquadrant.com/
Reviewed-by: David Steele <david@pgmasters.net>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
particular user/db/query.
The function pg_stat_statements_reset() is extended to accept userid, dbid,
and queryid as input parameters. Now, it can discard the statistics
gathered so far by pg_stat_statements corresponding to the specified
userid, dbid, and queryid. If no parameter is specified or all the
specified parameters have default value aka 0, it will discard all
statistics as per the old behavior.
The new behavior is useful to get the fresh statistics for a specific
user/database/query without resetting all the existing statistics.
Author: Haribabu Kommi, with few additional changes by me
Reviewed-by: Michael Paquier, Amit Kapila and Fujii Masao
Discussion: https://postgr.es/m/CAJrrPGcyh-gkFswyc6C661K6cknL0XkNqVT0sQt2mFNMR4HRKA@mail.gmail.com
These commands allow assignment of values produced by queries to pgbench
variables, where they can be used by further commands. \gset terminates
a command sequence (just like a bare semicolon); \cset separates
multiple queries in a compound command, like an escaped semicolon (\;).
A prefix can be provided to the \-command and is prepended to the name
of each output column to produce the final variable name.
This feature allows pgbench scripts to react meaningfully to the actual
database contents, allowing more powerful benchmarks to be written.
Authors: Fabien Coelho, Álvaro Herrera
Reviewed-by: Amit Langote <Langote_Amit_f8@lab.ntt.co.jp>
Reviewed-by: Stephen Frost <sfrost@snowman.net>
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Tatsuo Ishii <ishii@sraoss.co.jp>
Reviewed-by: Rafia Sabih <rafia.sabih@enterprisedb.com>
Discussion: https://postgr.es/m/alpine.DEB.2.20.1607091005330.3412@sto
For a long time, plpgsql has allowed trigger functions to parse
references to OLD and NEW even if the current trigger event type didn't
assign a value to one or the other variable; but actually executing such
a reference would fail. The v11 changes to use "expanded records" for
DTYPE_REC variables changed the behavior so that the unassigned variable
now reads as a null composite value. While this behavioral change was
more or less unintentional, it seems that leaving it like this is better
than adding code and complexity to be bug-compatible with the old way.
The change doesn't break any code that worked before, and it eliminates
a gotcha that often required extra code to work around.
Hence, update the docs to say that these variables are "null" not
"unassigned" when not relevant to the event type. And add a regression
test covering the behavior, so that we'll notice if we ever break it
again.
Per report from Kristjan Tammekivi.
Discussion: https://postgr.es/m/CAABK7uL-uC9ZxKBXzo_68pKt7cECfNRv+c35CXZpjq6jCAzYYA@mail.gmail.com
runtime.sgml said that you couldn't change SysV IPC parameters on OpenBSD
except by rebuilding the kernel. That's definitely wrong in OpenBSD 6.x,
and excavation in their man pages says it changed in OpenBSD 3.3.
Update NetBSD and OpenBSD sections to recommend adjustment of the SEMMNI
and SEMMNS settings, which are painfully small by default on those
platforms. (The discussion thread contemplated recommending that
people select POSIX semaphores instead, but the performance consequences
of that aren't really clear, so I'll refrain.)
Remove pointless discussion of SEMMNU and SEMMAP from the FreeBSD
section. Minor other wordsmithing.
Discussion: https://postgr.es/m/27582.1546928073@sss.pgh.pa.us
DISABLE_PAGE_SKIPPING is available since v9.6, and SKIP_LOCKED since
v12. They lacked equivalents for vacuumdb, so this closes the gap.
Author: Nathan Bossart
Reviewed-by: Michael Paquier, Masahiko Sawada
Discussion: https://postgr.es/m/FFE5373C-E26A-495B-B5C8-911EC4A41C5E@amazon.com
Instead of running a SQL script to create the standard conversion
functions and pg_conversion entries, put those entries into the
initial data in postgres.bki.
This shaves a few percent off the runtime of initdb, and also allows
accurate comments to be attached to the conversion functions; the
previous script labeled them with machine-generated comments that
were not quite right for multi-purpose conversion functions.
Also, we can get rid of the duplicative Makefile and MSVC perl
implementations of the generation code for that SQL script.
A functional change is that these pg_proc and pg_conversion entries
are now "pinned" by initdb. Leaving them unpinned was perhaps a
good thing back while the conversions feature was under development,
but there seems no valid reason for it now.
Also, the conversion functions are now marked as immutable, where
before they were volatile by virtue of lacking any explicit
specification. That seems like it was just an oversight.
To avoid using magic constants in pg_conversion.dat, extend
genbki.pl to allow encoding names to be converted, much as it
does for language, access method, etc names.
John Naylor
Discussion: https://postgr.es/m/CAJVSVGWtUqxpfAaxS88vEGvi+jKzWZb2EStu5io-UPc4p9rSJg@mail.gmail.com
This patch teaches genbki.pl to replace pg_language names by OIDs
in much the same way as it already does for pg_am names etc, and
converts pg_proc.dat to use such symbolic references in the prolang
column.
Aside from getting rid of a few more magic numbers in the initial
catalog data, this means that Gen_fmgrtab.pl no longer needs to read
pg_language.dat, since it doesn't have to know the OID of the "internal"
language; now it's just looking for the string "internal".
No need for a catversion bump, since the contents of postgres.bki
don't actually change at all.
John Naylor
Discussion: https://postgr.es/m/CAJVSVGWtUqxpfAaxS88vEGvi+jKzWZb2EStu5io-UPc4p9rSJg@mail.gmail.com
This removes a portion of infrastructure introduced by fe0a0b5 to allow
compilation of Postgres in environments where no strong random source is
available, meaning that there is no linking to OpenSSL and no
/dev/urandom (Windows having its own CryptoAPI). No systems shipped
this century lack /dev/urandom, and the buildfarm is actually not
testing this switch at all, so just remove it. This simplifies
particularly some backend code which included a fallback implementation
using shared memory, and removes a set of alternate regression output
files from pgcrypto.
Author: Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/20181230063219.GG608@paquier.xyz
Previously, the SQL random() function depended on libc's random(3),
and setseed() invoked srandom(3). This results in interference between
these functions and backend-internal uses of random(3). We'd never paid
too much mind to that, but in the wake of commit 88bdbd3f7 which added
log_statement_sample_rate, the interference arguably has a security
consequence: if log_statement_sample_rate is active then an unprivileged
user could probably control which if any of his SQL commands get logged,
by issuing setseed() at the right times. That seems bad.
To fix this reliably, we need random() and setseed() to use their own
private random state variable. Standard random(3) isn't amenable to such
usage, so let's switch to pg_erand48(). It's hard to say whether that's
more or less "random" than any particular platform's version of random(3),
but it does have a wider seed value and a longer period than are required
by POSIX, so we can hope that this isn't a big downgrade. Also, we should
now have uniform behavior of random() across platforms, which is worth
something.
While at it, upgrade the per-process seed initialization method to use
pg_strong_random() if available, greatly reducing the predictability
of the initial seed value. (I'll separately do something similar for
the internal uses of random().)
In addition to forestalling the possible security problem, this has a
benefit in the other direction, which is that we can now document
setseed() as guaranteeing a reproducible sequence of random() values.
Previously, because of the possibility of internal calls of random(3),
we could not promise any such thing.
Discussion: https://postgr.es/m/3859.1545849900@sss.pgh.pa.us
The documentation of ON DELETE and ON UPDATE uses the term "action",
which is also used on the ALTER TABLE page for other purposes. This
commit renames the term to "referential_action", which is more
consistent with the SQL specification. The new term is now used on the
documentation of both CREATE TABLE and ALTER TABLE for consistency.
Reported-by: Brigitte Blanc-Lafay
Author: Lætitia Avrot
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/CAB_COdiHEVVs0uB+uYCjjYUwQ4YFFekppq+Xqv6qAM8+cd42gA@mail.gmail.com
"$user" in a search_path string is replaced by CURRENT_USER not
SESSION_USER. (It actually was SESSION_USER in the initial implementation,
but we changed it shortly later, and evidently forgot to fix the docs to
match.)
Noted by antonov@stdpr.ru
Discussion: https://postgr.es/m/159151fb45d490c8d31ea9707e9ba99d@stdpr.ru
The "name" comparison operators now all support collations, making them
functionally equivalent to "text" comparisons, except for the different
physical representation of the datatype. They do, in fact, mostly share
the varstr_cmp and varstr_sortsupport infrastructure, which has been
slightly enlarged to handle the case.
To avoid changes in the default behavior of the datatype, set name's
typcollation to C_COLLATION_OID not DEFAULT_COLLATION_OID, so that
by default comparisons to a name value will continue to use strcmp
semantics. (This would have been the case for system catalog columns
anyway, because of commit 6b0faf723, but doing this makes it true for
user-created name columns as well. In particular, this avoids
locale-dependent changes in our regression test results.)
In consequence, tweak a couple of places that made assumptions about
collatable base types always having typcollation DEFAULT_COLLATION_OID.
I have not, however, attempted to relax the restriction that user-
defined collatable types must have that. Hence, "name" doesn't
behave quite like a user-defined type; it acts more like a domain
with COLLATE "C". (Conceivably, if we ever get rid of the need for
catalog name columns to be fixed-length, "name" could actually become
such a domain over text. But that'd be a pretty massive undertaking,
and I'm not volunteering.)
Discussion: https://postgr.es/m/15938.1544377821@sss.pgh.pa.us
When partitioned tables were introduced, we failed to realize that by
copying the tablespace handling for other relation kinds with no
physical storage we were causing the secondary effect that their
partitions would not automatically inherit the tablespace setting. This
is surprising and unhelpful, so change it to adopt the behavior
introduced in pg11 (commit 33e6c34c32) for partitioned indexes: the
parent relation remembers the tablespace specification, which is then
used for any new partitions that don't declare one.
Because this commit changes behavior of the TABLESPACE clause for
partitioned tables (it's no longer a no-op), it is not backpatched.
Author: David Rowley, Álvaro Herrera
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CAKJS1f9SxVzqDrGD1teosFd6jBMM0UEaa14_8mRvcWE19Tu0hA@mail.gmail.com
When we first put in collations support, we basically punted on teaching
pg_statistic, ANALYZE, and the planner selectivity functions about that.
They've just used DEFAULT_COLLATION_OID independently of the actual
collation of the data. It's time to improve that, so:
* Add columns to pg_statistic that record the specific collation associated
with each statistics slot.
* Teach ANALYZE to use the column's actual collation when comparing values
for statistical purposes, and record this in the appropriate slot. (Note
that type-specific typanalyze functions are now expected to fill
stats->stacoll with the appropriate collation, too.)
* Teach assorted selectivity functions to use the actual collation of
the stats they are looking at, instead of just assuming it's
DEFAULT_COLLATION_OID.
This should give noticeably better results in selectivity estimates for
columns with nondefault collations, at least for query clauses that use
that same collation (which would be the default behavior in most cases).
It's still true that comparisons with explicit COLLATE clauses different
from the stored data's collation won't be well-estimated, but that's no
worse than before. Also, this patch does make the first step towards
doing better with that, which is that it's now theoretically possible to
collect stats for a collation other than the column's own collation.
Patch by me; thanks to Peter Eisentraut for review.
Discussion: https://postgr.es/m/14706.1544630227@sss.pgh.pa.us
The cache lookup routines for foreign-data wrappers and foreign servers
are extended with an extra argument to handle a set of flags. The only
value which can be used now is to indicate if a missing object should
result in an error or not, and are designed to be extensible on need.
Those new routines are added into the existing set of user-visible
FDW APIs and documented in consequence. They will be used for future
patches to improve the SQL interface for object addresses.
Author: Michael Paquier
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/CAB7nPqSZxrSmdHK-rny7z8mi=EAFXJ5J-0RbzDw6aus=wB5azQ@mail.gmail.com
The timestamp generated by the standby at message transmission has been
included in the protocol since its introduction for both the status
update message and hot standby feedback message, but it has never
appeared in pg_stat_replication. Seeing this timestamp does not matter
much with a cluster which has a lot of activity, but on a mostly-idle
cluster, this makes monitoring able to react faster than the configured
timeouts.
Author: MyungKyu LIM
Reviewed-by: Michael Paquier, Masahiko Sawada
Discussion: https://postgr.es/m/1657809367.407321.1533027417725.JavaMail.jboss@ep2ml404
This restriction is implicit in the check-only-once implementation we use
for table and domain constraints, but it wasn't spelled out anywhere, nor
was there any advice about how to alter a constraint's behavior safely.
Improve that.
I was also dissatisfied with the documentation of ALTER DOMAIN VALIDATE
CONSTRAINT, which entirely failed to explain the use of that feature; and
thence decided that ALTER TABLE VALIDATE CONSTRAINT could be documented
better as well.
Perhaps we should back-patch this, along with the related commit 36d442a25,
but for now I refrained.
Discussion: https://postgr.es/m/12539.1544107316@sss.pgh.pa.us
Expand section 5.6 "Privileges" to include the full definition of
each privilege type, and an explanation of aclitem privilege displays,
along with some helpful summary tables. Most of this material came
out of the GRANT reference page, although some of it is new.
Adjust a bunch of links that were pointing to GRANT to point to 5.6.
Fabien Coelho and Tom Lane, reviewed by Bradley DeJong
Discussion: https://postgr.es/m/alpine.DEB.2.21.1807311735200.20743@lancre
The following options are added for extensions:
- TAP_TESTS, to allow an extention to run TAP tests which are the ones
present in t/*.pl. A subset of tests can always be run with the
existing PROVE_TESTS for developers.
- ISOLATION, to define a list of isolation tests.
- ISOLATION_OPTS, to pass custom options to isolation_tester.
A couple of custom Makefile rules have been accumulated across the tree
to cover the lack of facility in PGXS for a couple of releases when
using those test suites, which are all now replaced with the new flags,
without reducing the test coverage. Note that tests of contrib/bloom/
are not enabled yet, as those are proving unstable in the buildfarm.
Author: Michael Paquier
Reviewed-by: Adam Berlin, Álvaro Herrera, Tom Lane, Nikolay Shaplov,
Arthur Zakirov
Discussion: https://postgr.es/m/20180906014849.GG2726@paquier.xyz
This allows control of the directory in which the postmaster sockets
are created for the temporary postmasters started by pg_upgrade.
The default location remains the current working directory, which is
typically fine, but if it is deeply nested then its pathname might
be too long to be a socket name.
In passing, clean up some messiness in pg_upgrade's option handling,
particularly the confusing and undocumented way that configuration-only
datadirs were handled. And fix check_required_directory's substantially
under-baked cleanup of directory pathnames.
Daniel Gustafsson, reviewed by Hironobu Suzuki, some code cleanup by me
Discussion: https://postgr.es/m/E72DD5C3-2268-48A5-A907-ED4B34BEC223@yesql.se
The source code comments documented this, but the user-facing docs, not
so much. Add a section to Appendix B that discusses it.
In passing, improve a couple other things in Appendix B --- notably,
a long-obsolete claim that time zone abbreviations are looked up in
a fixed table.
Per bug #15527 from Michael Davidson.
Discussion: https://postgr.es/m/15527-f1be0b4dc99ebbe7@postgresql.org
This allows to set a lower log_min_duration_statement value without
incurring excessive log traffic (which reduces performance). This can
be useful to analyze workloads with lots of short queries.
Author: Adrien Nayrat
Reviewed-by: David Rowley, Vik Fearing
Discussion: https://postgr.es/m/c30ee535-ee1e-db9f-fa97-146b9f62caed@anayrat.info
The previous recovery.conf regime accepted multiple recovery_target*
settings and used the last one. This does not translate well to the
general GUC system. Specifically, under EXEC_BACKEND, the settings
are written out not in any particular order, so the order in which
they were originally set is not available to new processes.
Rather than redesign the GUC system, it was decided to abandon the old
behavior and only allow one recovery target setting. A second setting
will cause an error. However, it is allowed to set the same parameter
multiple times or unset a parameter and set a different one.
Discussion: https://www.postgresql.org/message-id/flat/27802171543235530%40iva2-6ec8f0a6115e.qloud-c.yandex.net#701a59c837ad0bf8c244344aaf3ef5a4
"\pset format csv", or --csv, selects comma-separated values table format.
This is compliant with RFC 4180, except that we aren't too picky about
whether the record separator is LF or CRLF; also, the user may choose a
field separator other than comma.
This output format is directly compatible with the server's COPY CSV
format, and will also be useful as input to other programs. It's
considerably safer for that purpose than the old recommendation to
use "unaligned" format, since the latter couldn't handle data
containing the field separator character.
Daniel Vérité, reviewed by Fabien Coelho and David Fetter, some
tweaking by me
Discussion: https://postgr.es/m/a8de371e-006f-4f92-ab72-2bbe3ee78f03@manitou-mail.org
A set of failures in buildfarm machines are proving that this is not
quite ready yet because of another set of issues:
- MSVC scripts assume that REGRESS_OPTS can only use top_builddir. Some
test suites actually finish by using top_srcdir, like pg_stat_statements
which cause the regression tests to never run.
- Trying to enforce top_builddir does not work either when using VPATH
as this is not recognized properly.
- TAP tests of bloom are unstable on various platforms, causing various
failures.
The following options are added for extensions:
- TAP_TESTS, to allow an extention to run TAP tests which are the ones
present in t/*.pl. A subset of tests can always be run with the
existing PROVE_TESTS for developers.
- ISOLATION, to define a list of isolation tests.
- ISOLATION_OPTS, to pass custom options to isolation_tester.
A couple of custom Makefile targets have been accumulated across the
tree to cover the lack of facility in PGXS for a couple of releases when
using those test suites, which are all now replaced with the new flags,
without reducing the test coverage. This also fixes an issue with
contrib/bloom/, which had a custom target to trigger its TAP tests of
its own not part of the main check runs.
Author: Michael Paquier
Reviewed-by: Adam Berlin, Álvaro Herrera, Tom Lane, Nikolay Shaplov,
Arthur Zakirov
Discussion: https://postgr.es/m/20180906014849.GG2726@paquier.xyz
recovery.conf settings are now set in postgresql.conf (or other GUC
sources). Currently, all the affected settings are PGC_POSTMASTER;
this could be refined in the future case by case.
Recovery is now initiated by a file recovery.signal. Standby mode is
initiated by a file standby.signal. The standby_mode setting is
gone. If a recovery.conf file is found, an error is issued.
The trigger_file setting has been renamed to promote_trigger_file as
part of the move.
The documentation chapter "Recovery Configuration" has been integrated
into "Server Configuration".
pg_basebackup -R now appends settings to postgresql.auto.conf and
creates a standby.signal file.
Author: Fujii Masao <masao.fujii@gmail.com>
Author: Simon Riggs <simon@2ndquadrant.com>
Author: Abhijit Menon-Sen <ams@2ndquadrant.com>
Author: Sergei Kornilov <sk@zsrv.org>
Discussion: https://www.postgresql.org/message-id/flat/607741529606767@web3g.yandex.ru/
The documentation of CREATE/ALTER ROLE has been missing two things
related to PASSWORD:
- The password value provided needs to be quoted, some places of the
documentation marked the field with quotes, but not others, which led to
confusion.
- PASSWORD NULL was not provided consistently, with ENCRYPTED being not
compatible with it.
Reported-by: Steven Winfield
Author: Michael Paquier
Reviewed-by: David G. Johnston
Discussion: https://postgr.es/m/154282901979.1316.7418475422120496802@wrigleys.postgresql.org
Documenting INCLUDE in the section about unique indexes is confusing,
as complained of by Emilio Platzer. Furthermore, it entirely failed
to explain why you might want to use the feature. The section about
index-only scans is really the right place; it already talked about
making such things the hard way. Rewrite that text to describe INCLUDE
as the normal way to make a covering index.
Also, move that section up a couple of places, as it now seems more
important than some of the stuff we had before it. It still has to
be after expression and partial indexes, since otherwise some of it
would involve forward references.
Discussion: https://postgr.es/m/154031939560.30897.14677735588262722042@wrigleys.postgresql.org
Previously tables declared WITH OIDS, including a significant fraction
of the catalog tables, stored the oid column not as a normal column,
but as part of the tuple header.
This special column was not shown by default, which was somewhat odd,
as it's often (consider e.g. pg_class.oid) one of the more important
parts of a row. Neither pg_dump nor COPY included the contents of the
oid column by default.
The fact that the oid column was not an ordinary column necessitated a
significant amount of special case code to support oid columns. That
already was painful for the existing, but upcoming work aiming to make
table storage pluggable, would have required expanding and duplicating
that "specialness" significantly.
WITH OIDS has been deprecated since 2005 (commit ff02d0a05280e0).
Remove it.
Removing includes:
- CREATE TABLE and ALTER TABLE syntax for declaring the table to be
WITH OIDS has been removed (WITH (oids[ = true]) will error out)
- pg_dump does not support dumping tables declared WITH OIDS and will
issue a warning when dumping one (and ignore the oid column).
- restoring an pg_dump archive with pg_restore will warn when
restoring a table with oid contents (and ignore the oid column)
- COPY will refuse to load binary dump that includes oids.
- pg_upgrade will error out when encountering tables declared WITH
OIDS, they have to be altered to remove the oid column first.
- Functionality to access the oid of the last inserted row (like
plpgsql's RESULT_OID, spi's SPI_lastoid, ...) has been removed.
The syntax for declaring a table WITHOUT OIDS (or WITH (oids = false)
for CREATE TABLE) is still supported. While that requires a bit of
support code, it seems unnecessary to break applications / dumps that
do not use oids, and are explicit about not using them.
The biggest user of WITH OID columns was postgres' catalog. This
commit changes all 'magic' oid columns to be columns that are normally
declared and stored. To reduce unnecessary query breakage all the
newly added columns are still named 'oid', even if a table's column
naming scheme would indicate 'reloid' or such. This obviously
requires adapting a lot code, mostly replacing oid access via
HeapTupleGetOid() with access to the underlying Form_pg_*->oid column.
The bootstrap process now assigns oids for all oid columns in
genbki.pl that do not have an explicit value (starting at the largest
oid previously used), only oids assigned later by oids will be above
FirstBootstrapObjectId. As the oid column now is a normal column the
special bootstrap syntax for oids has been removed.
Oids are not automatically assigned during insertion anymore, all
backend code explicitly assigns oids with GetNewOidWithIndex(). For
the rare case that insertions into the catalog via SQL are called for
the new pg_nextoid() function can be used (which only works on catalog
tables).
The fact that oid columns on system tables are now normal columns
means that they will be included in the set of columns expanded
by * (i.e. SELECT * FROM pg_class will now include the table's oid,
previously it did not). It'd not technically be hard to hide oid
column by default, but that'd mean confusing behavior would either
have to be carried forward forever, or it'd cause breakage down the
line.
While it's not unlikely that further adjustments are needed, the
scope/invasiveness of the patch makes it worthwhile to get merge this
now. It's painful to maintain externally, too complicated to commit
after the code code freeze, and a dependency of a number of other
patches.
Catversion bump, for obvious reasons.
Author: Andres Freund, with contributions by John Naylor
Discussion: https://postgr.es/m/20180930034810.ywp2c7awz7opzcfr@alap3.anarazel.de
The documentation claimed that an enum type requires "one or more"
labels, but since 1fd9883ff4, zero labels are also allowed.
Reported-by: Lukas Eder <lukas.eder@gmail.com>
Bug: #15356
When hostaddr is given, the actual IP address that psql is connected to
can be totally unexpected for the given host. The more verbose output
we now generate makes things clearer. Since the "host" and "hostaddr"
parts of the conninfo could come from different sources (say, one of
them is in the service specification or a URI-style conninfo and the
other is not), this is not as silly as it may first appear. This is
also definitely useful if the hostname resolves to multiple addresses.
Author: Fabien Coelho
Reviewed-by: Pavel Stehule, Arthur Zakirov
Discussion: https://postgr.es/m/alpine.DEB.2.21.1810261532380.27686@lancrehttps://postgr.es/m/alpine.DEB.2.21.1808201323020.13832@lancre
This didn't actually work: COPY would fail to flush the right files, and
instead would try to flush a non-existing file, causing the whole
transaction to fail.
Cope by raising an error as soon as the command is sent instead, to
avoid a nasty later surprise. Of course, it would be much better to
make it work, but we don't have a patch for that yet, and we don't know
if we'll want to backpatch one when we do.
Reported-by: Tomas Vondra
Author: David Rowley
Reviewed-by: Amit Langote, Steve Singer, Tomas Vondra
On some operating systems, it doesn't make sense to retry fsync(),
because dirty data cached by the kernel may have been dropped on
write-back failure. In that case the only remaining copy of the
data is in the WAL. A subsequent fsync() could appear to succeed,
but not have flushed the data. That means that a future checkpoint
could apparently complete successfully but have lost data.
Therefore, violently prevent any future checkpoint attempts by
panicking on the first fsync() failure. Note that we already
did the same for WAL data; this change extends that behavior to
non-temporary data files.
Provide a GUC data_sync_retry to control this new behavior, for
users of operating systems that don't eject dirty data, and possibly
forensic/testing uses. If it is set to on and the write-back error
was transient, a later checkpoint might genuinely succeed (on a
system that does not throw away buffers on failure); if the error is
permanent, later checkpoints will continue to fail. The GUC defaults
to off, meaning that we panic.
Back-patch to all supported releases.
There is still a narrow window for error-loss on some operating
systems: if the file is closed and later reopened and a write-back
error occurs in the intervening time, but the inode has the bad
luck to be evicted due to memory pressure before we reopen, we could
miss the error. A later patch will address that with a scheme
for keeping files with dirty data open at all times, but we judge
that to be too complicated to back-patch.
Author: Craig Ringer, with some adjustments by Thomas Munro
Reported-by: Craig Ringer
Reviewed-by: Robert Haas, Thomas Munro, Andres Freund
Discussion: https://postgr.es/m/20180427222842.in2e4mibx45zdth5%40alap3.anarazel.de
This hasn't been correct since 9.3 added "latex-longtable".
I left the phraseology "Unique abbreviations are allowed" alone.
It's correct as far as it goes, and we are studiously refraining
from specifying exactly what happens if you give a non-unique
abbreviation. (The answer in the back branches is "you get a
backwards-compatible choice", and the answer in HEAD will shortly
be "you get an error", but there seems no need to mention such
details here.)
Daniel Vérité
Discussion: https://postgr.es/m/cb7e1caf-3ea6-450d-af28-f524903a030c@manitou-mail.org
date_trunc(field, timestamptz, zone_name) performs truncation using
the named time zone as reference, rather than working in the session
time zone as is the default behavior. It's equivalent to
date_trunc(field, timestamptz at time zone zone_name) at time zone zone_name
but it's faster, easier to type, and arguably easier to understand.
Vik Fearing and Tom Lane
Discussion: https://postgr.es/m/6249ffc4-2b22-4c1b-4e7d-7af84fedd7c6@2ndquadrant.com
Change lock level for renaming index (either ALTER INDEX or implicitly
via some other commands) from AccessExclusiveLock to
ShareUpdateExclusiveLock.
One reason we need a strong lock for relation renaming is that the
name change causes a rebuild of the relcache entry. Concurrent
sessions that have the relation open might not be able to handle the
relcache entry changing underneath them. Therefore, we need to lock
the relation in a way that no one can have the relation open
concurrently. But for indexes, the relcache handles reloads specially
in RelationReloadIndexInfo() in a way that keeps changes in the
relcache entry to a minimum. As long as no one keeps pointers to
rd_amcache and rd_options around across possible relcache flushes,
which is the case, this ought to be safe.
We also want to use a self-exclusive lock for correctness, so that
concurrent DDL doesn't overwrite the rename if they start updating
while still seeing the old version. Therefore, we use
ShareUpdateExclusiveLock, which is already used by other DDL commands
that want to operate in a concurrent manner.
The reason this is interesting at all is that renaming an index is a
typical part of a concurrent reindexing workflow (CREATE INDEX
CONCURRENTLY new + DROP INDEX CONCURRENTLY old + rename back). And
indeed a future built-in REINDEX CONCURRENTLY might rely on the ability
to do concurrent renames as well.
Reviewed-by: Andrey Klychkov <aaklychkov@mail.ru>
Reviewed-by: Fabrízio de Royes Mello <fabriziomello@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/1531767486.432607658@f357.i.mail.ru
Amit Kapila
Michael Paquier
Thomas Munro
Peter Eisentraut
Magnus Hagander
Andres Freund
Tom Lane
Tatsuo Ishii
Alvaro Herrera
Tomas Vondra
Andrew Gierth
Bruce Momjian
Stephen Frost
Peter Eisentraut