With -DCATCACHE_FORCE_RELEASE a few tests failed. Those were trying to test
behavior in the absence of invalidation processing and
-DCATCACHE_FORCE_RELEASE obviously adds a lot of invalidation processing. The
test already tried to handle debug_discard_caches > 0, by disabling it for
individual tests.
Instead hide potentially problematic function calls in a wrapper function that
catches the does-not-exist error. The error isn't the actually interesting
bit, it's whether the stats entry still exist afterwards.
I confirmed that the tests still catches leaked function stats if I nuke the
protections against that in pgstat_function.c.
Per buildfarm animal prion.
Discussion: https://postgr.es/m/20220407165709.jgdkrzqlkcwue6ko@alap3.anarazel.de
- subscriber stats reset path was untested
- slot stat sreset path for all slots was untested
- pg_stat_database.sessions etc was untested
- pg_stat_reset_shared() was untested, for any kind of shared stats
- pg_stat_reset() was untested
Author: Melanie Plageman <melanieplageman@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Window functions such as row_number() always return a value higher than
the previously returned value for tuples in any given window partition.
Traditionally queries such as;
SELECT * FROM (
SELECT *, row_number() over (order by c) rn
FROM t
) t WHERE rn <= 10;
were executed fairly inefficiently. Neither the query planner nor the
executor knew that once rn made it to 11 that nothing further would match
the outer query's WHERE clause. It would blindly continue until all
tuples were exhausted from the subquery.
Here we implement means to make the above execute more efficiently.
This is done by way of adding a pg_proc.prosupport function to various of
the built-in window functions and adding supporting code to allow the
support function to inform the planner if the window function is
monotonically increasing, monotonically decreasing, both or neither. The
planner is then able to make use of that information and possibly allow
the executor to short-circuit execution by way of adding a "run condition"
to the WindowAgg to allow it to determine if some of its execution work
can be skipped.
This "run condition" is not like a normal filter. These run conditions
are only built using quals comparing values to monotonic window functions.
For monotonic increasing functions, quals making use of the btree
operators for <, <= and = can be used (assuming the window function column
is on the left). You can see here that once such a condition becomes false
that a monotonic increasing function could never make it subsequently true
again. For monotonically decreasing functions the >, >= and = btree
operators for the given type can be used for run conditions.
The best-case situation for this is when there is a single WindowAgg node
without a PARTITION BY clause. Here when the run condition becomes false
the WindowAgg node can simply return NULL. No more tuples will ever match
the run condition. It's a little more complex when there is a PARTITION
BY clause. In this case, we cannot return NULL as we must still process
other partitions. To speed this case up we pull tuples from the outer
plan to check if they're from the same partition and simply discard them
if they are. When we find a tuple belonging to another partition we start
processing as normal again until the run condition becomes false or we run
out of tuples to process.
When there are multiple WindowAgg nodes to evaluate then this complicates
the situation. For intermediate WindowAggs we must ensure we always
return all tuples to the calling node. Any filtering done could lead to
incorrect results in WindowAgg nodes above. For all intermediate nodes,
we can still save some work when the run condition becomes false. We've
no need to evaluate the WindowFuncs anymore. Other WindowAgg nodes cannot
reference the value of these and these tuples will not appear in the final
result anyway. The savings here are small in comparison to what can be
saved in the top-level WingowAgg, but still worthwhile.
Intermediate WindowAgg nodes never filter out tuples, but here we change
WindowAgg so that the top-level WindowAgg filters out tuples that don't
match the intermediate WindowAgg node's run condition. Such filters
appear in the "Filter" clause in EXPLAIN for the top-level WindowAgg node.
Here we add prosupport functions to allow the above to work for;
row_number(), rank(), dense_rank(), count(*) and count(expr). It appears
technically possible to do the same for min() and max(), however, it seems
unlikely to be useful enough, so that's not done here.
Bump catversion
Author: David Rowley
Reviewed-by: Andy Fan, Zhihong Yu
Discussion: https://postgr.es/m/CAApHDvqvp3At8++yF8ij06sdcoo1S_b2YoaT9D4Nf+MObzsrLQ@mail.gmail.com
Previously none of our tests triggered recovery conflicts. The test is
primarily motivated by needing tests for recovery conflict stats for shared
memory based pgstats. But it's also a decent start for recovery conflict
handling in general.
The only type of recovery conflict not tested yet are rcovery deadlock
conflicts.
By configuring log_recovery_conflict_waits the test adds some very minimal
testing for that path as well.
Author: Melanie Plageman <melanieplageman@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Tests that standbys:
- drop stats for objects when the those records are replayed
- persist stats across graceful restarts
- discard stats after immediate / crash restarts
Author: Melanie Plageman <melanieplageman@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Plain \dconfig is basically equivalent to SHOW except that you can
give it a pattern with wildcards, either to match multiple GUCs or
because you don't exactly remember the name you want.
\dconfig+ adds type, context, and access-privilege information,
mainly because every other kind of object privilege has a psql command
to show it, so GUC privileges should too. (A form of this command was
in some versions of the patch series leading up to commit a0ffa885e.
We pulled it out then because of doubts that the design and code were
up to snuff, but I think subsequent work has resolved that.)
In passing, fix incorrect completion of GUC names in GRANT/REVOKE
ON PARAMETER: a0ffa885e neglected to use the VERBATIM form of
COMPLETE_WITH_QUERY, so it misbehaved for custom (qualified) GUC
names.
Mark Dilger and Tom Lane
Discussion: https://postgr.es/m/3118455.1649267333@sss.pgh.pa.us
Test that stats are restored during normal restarts, discarded after a crash /
immediate restart, and that a corrupted stats file leads to stats being reset.
Author: Melanie Plageman <melanieplageman@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Modify the subroutines called by RI trigger functions that want to check
if a given referenced value exists in the referenced relation to simply
scan the foreign key constraint's unique index, instead of using SPI to
execute
SELECT 1 FROM referenced_relation WHERE ref_key = $1
This saves a lot of work, especially when inserting into or updating a
referencing relation.
This rewrite allows to fix a PK row visibility bug caused by a partition
descriptor hack which requires ActiveSnapshot to be set to come up with
the correct set of partitions for the RI query running under REPEATABLE
READ isolation. We now set that snapshot indepedently of the snapshot
to be used by the PK index scan, so the two no longer interfere. The
buggy output in src/test/isolation/expected/fk-snapshot.out of the
relevant test case added by commit 00cb86e75d has been corrected.
(The bug still exists in branch 14, however, but this fix is too
invasive to backpatch.)
Author: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Li Japin <japinli@hotmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Discussion: https://postgr.es/m/CA+HiwqGkfJfYdeq5vHPh6eqPKjSbfpDDY+j-kXYFePQedtSLeg@mail.gmail.com
They are to check the behavior of RI_FKey_check() and
ri_Check_Pk_Match(). A test case whereby RI_FKey_check() queries a
partitioned PK table under REPEATABLE READ isolation produces wrong
output due to a bug of the partition-descriptor logic and that is noted
as such in the comment in the test. A subsequent commit will fix the
bug and replace the buggy output by the correct one.
Author: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/1627848.1636676261@sss.pgh.pa.us
Add support for unlogged sequences. Unlike for unlogged tables, this
is not a performance feature. It allows sequences associated with
unlogged tables to be excluded from replication.
A new subcommand ALTER SEQUENCE ... SET LOGGED/UNLOGGED is added.
An identity/serial sequence now automatically gets and follows the
persistence level (logged/unlogged) of its owning table. (The
sequences owned by temporary tables were already temporary through the
separate mechanism in RangeVarAdjustRelationPersistence().) But you
can still change the persistence of an owned sequence separately.
Also, pg_dump and pg_upgrade preserve the persistence of existing
sequences.
Discussion: https://www.postgresql.org/message-id/flat/04e12818-2f98-257c-b926-2845d74ed04f%402ndquadrant.com
It might be worth instead splitting the test up to produce a smaller
alternative output file. But that's not trivial either, due to the number of
steps defined. And more than I want to do tonight.
Per buildfarm.
Introduce a new GUC recovery_prefetch. When enabled, look ahead in the
WAL and try to initiate asynchronous reading of referenced data blocks
that are not yet cached in our buffer pool. For now, this is done with
posix_fadvise(), which has several caveats. Since not all OSes have
that system call, "try" is provided so that it can be enabled where
available. Better mechanisms for asynchronous I/O are possible in later
work.
Set to "try" for now for test coverage. Default setting to be finalized
before release.
The GUC wal_decode_buffer_size limits the distance we can look ahead in
bytes of decoded data.
The existing GUC maintenance_io_concurrency is used to limit the number
of concurrent I/Os allowed, based on pessimistic heuristics used to
infer that I/Os have begun and completed. We'll also not look more than
maintenance_io_concurrency * 4 block references ahead.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Tomas Vondra <tomas.vondra@2ndquadrant.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com> (earlier version)
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier version)
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com> (earlier version)
Tested-by: Tomas Vondra <tomas.vondra@2ndquadrant.com> (earlier version)
Tested-by: Jakub Wartak <Jakub.Wartak@tomtom.com> (earlier version)
Tested-by: Dmitry Dolgov <9erthalion6@gmail.com> (earlier version)
Tested-by: Sait Talha Nisanci <Sait.Nisanci@microsoft.com> (earlier version)
Discussion: https://postgr.es/m/CA%2BhUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq%3DAovOddfHpA%40mail.gmail.com
In the stats collector days it was hard to write tests for the stats system,
because fundamentally delivery of stats messages over UDP was not
synchronous (nor guaranteed). Now we easily can force pending stats updates to
be flushed synchronously.
This moves stats.sql into a parallel group, there isn't a reason for it to run
in isolation anymore. And it may shake out some bugs.
Bumps catversion.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
With stats now being stored in shared memory, the GUC isn't needed
anymore. However, the pg_stat_tmp directory and PG_STAT_TMP_DIR define are
kept, as pg_stat_statements (and some out-of-core extensions) store data in
it.
Docs will be updated in a subsequent commit, together with the other pending
docs updates due to shared memory stats.
Author: Andres Freund <andres@anarazel.de>
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220330233550.eiwsbearu6xhuqwe@alap3.anarazel.de
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Previously the statistics collector received statistics updates via UDP and
shared statistics data by writing them out to temporary files regularly. These
files can reach tens of megabytes and are written out up to twice a
second. This has repeatedly prevented us from adding additional useful
statistics.
Now statistics are stored in shared memory. Statistics for variable-numbered
objects are stored in a dshash hashtable (backed by dynamic shared
memory). Fixed-numbered stats are stored in plain shared memory.
The header for pgstat.c contains an overview of the architecture.
The stats collector is not needed anymore, remove it.
By utilizing the transactional statistics drop infrastructure introduced in a
prior commit statistics entries cannot "leak" anymore. Previously leaked
statistics were dropped by pgstat_vacuum_stat(), called from [auto-]vacuum. On
systems with many small relations pgstat_vacuum_stat() could be quite
expensive.
Now that replicas drop statistics entries for dropped objects, it is not
necessary anymore to reset stats when starting from a cleanly shut down
replica.
Subsequent commits will perform some further code cleanup, adapt docs and add
tests.
Bumps PGSTAT_FILE_FORMAT_ID.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-By: "David G. Johnston" <david.g.johnston@gmail.com>
Reviewed-By: Tomas Vondra <tomas.vondra@2ndquadrant.com> (in a much earlier version)
Reviewed-By: Arthur Zakirov <a.zakirov@postgrespro.ru> (in a much earlier version)
Reviewed-By: Antonin Houska <ah@cybertec.at> (in a much earlier version)
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Discussion: https://postgr.es/m/20220308205351.2xcn6k4x5yivcxyd@alap3.anarazel.de
Discussion: https://postgr.es/m/20210319235115.y3wz7hpnnrshdyv6@alap3.anarazel.de
The column 'subskiplsn' uses TYPALIGN_DOUBLE (which has 4 bytes alignment
on AIX) for storage. But the C Struct (Form_pg_subscription) has 8-byte
alignment for this field, so retrieving it from storage causes an
unaligned read.
To fix this, we rearranged the 'subskiplsn' column in the catalog so that
it naturally comes at an 8-byte boundary.
We have fixed a similar problem in commit f3b421da5f. This patch adds a
test to avoid a similar mistake in the future.
Reported-by: Noah Misch
Diagnosed-by: Noah Misch, Masahiko Sawada, Amit Kapila
Author: Masahiko Sawada
Reviewed-by: Noah Misch, Amit Kapila
Discussion: https://postgr.es/m/20220401074423.GC3682158@rfd.leadboat.comhttps://postgr.es/m/CAD21AoDeScrsHhLyEPYqN3sydg6PxAPVBboK=30xJfUVihNZDA@mail.gmail.com
Soon the stats collector will be no more, with statistics instead getting
stored in shared memory. There are a lot of references to the stats collector
in comments. This commit replaces most of these references with "cumulative
statistics system", with the remaining ones getting replaced as part of
subsequent commits.
This is done separately from the - quite large - shared memory statistics
patch to make review easier.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Discussion: https://postgr.es/m/20220308205351.2xcn6k4x5yivcxyd@alap3.anarazel.de
Exclusive-mode backups have been deprecated since 9.6 (when
non-exclusive backups were introduced) due to the issues
they can cause should the system crash while one is running and
generally because non-exclusive provides a much better interface.
Further, exclusive backup mode wasn't really being tested (nor was most
of the related code- like being able to log in just to stop an exclusive
backup and the bits of the state machine related to that) and having to
possibly deal with an exclusive backup and the backup_label file
existing during pg_basebackup, pg_rewind, etc, added other complexities
that we are better off without.
This patch removes the exclusive backup mode, the various special cases
for dealing with it, and greatly simplifies the online backup code and
documentation.
Authors: David Steele, Nathan Bossart
Reviewed-by: Chapman Flack
Discussion: https://postgr.es/m/ac7339ca-3718-3c93-929f-99e725d1172c@pgmasters.nethttps://postgr.es/m/CAHg+QDfiM+WU61tF6=nPZocMZvHDzCK47Kneyb0ZRULYzV5sKQ@mail.gmail.com
This patch allows "PGC_SUSET" parameters to be set by non-superusers
if they have been explicitly granted the privilege to do so.
The privilege to perform ALTER SYSTEM SET/RESET on a specific parameter
can also be granted.
Such privileges are cluster-wide, not per database. They are tracked
in a new shared catalog, pg_parameter_acl.
Granting and revoking these new privileges works as one would expect.
One caveat is that PGC_USERSET GUCs are unaffected by the SET privilege
--- one could wish that those were handled by a revocable grant to
PUBLIC, but they are not, because we couldn't make it robust enough
for GUCs defined by extensions.
Mark Dilger, reviewed at various times by Andrew Dunstan, Robert Haas,
Joshua Brindle, and myself
Discussion: https://postgr.es/m/3D691E20-C1D5-4B80-8BA5-6BEB63AF3029@enterprisedb.com
The test created a 1m row table in order to test parallel operation of
JSON_VALUE. However, this was more than were needed for the test, so
save time by halving it, and also by making the table unlogged.
Experimentation shows that this size is only a little above the number
required to generate the expected output.
Per gripe from Andres Freund
Discussion: https://postgr.es/m/20220406022118.3ocqvhxr6kciw5am@alap3.anarazel.de
It's possible for the query that "waits for restart" to complete a
successful iteration before the postmaster has noticed its SIGKILL'd
child and begun the restart cycle. (This is a bit hard to believe
perhaps, but it's been seen at least twice in the buildfarm, mainly
on ancient platforms that likely have quirky schedulers.)
To provide a more secure interlock, wait for the other session
we're using to report that it's been forcibly shut down.
Patch by me, based on a suggestion from Andres Freund.
Back-patch to v14 where this test case came in.
Discussion: https://postgr.es/m/1801850.1649047827@sss.pgh.pa.us
These clauses allow the user to specify how data from nested paths are
joined, allowing considerable freedom in shaping the tabular output of
JSON_TABLE.
PLAN DEFAULT allows the user to specify the global strategies when
dealing with sibling or child nested paths. The is often sufficient to
achieve the necessary goal, and is considerably simpler than the full
PLAN clause, which allows the user to specify the strategy to be used
for each named nested path.
Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zhihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/7e2cb85d-24cf-4abb-30a5-1a33715959bd@postgrespro.ru
The expected backend message after SIGQUIT changed in commit
7e784d1dc, but we missed updating this test case. Also, experience
shows that we might sometimes get "could not send data to server"
instead of either of the libpq messages the test is looking for.
Per report from Mark Dilger. Back-patch to v14 where the
backend message changed.
Discussion: https://postgr.es/m/17BD82D7-49AC-40C9-8204-E7ADD30321A0@enterprisedb.com
This feature allows jsonb data to be treated as a table and thus used in
a FROM clause like other tabular data. Data can be selected from the
jsonb using jsonpath expressions, and hoisted out of nested structures
in the jsonb to form multiple rows, more or less like an outer join.
Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zhihong Yu (whose
name I previously misspelled), Himanshu Upadhyaya, Daniel Gustafsson,
Justin Pryzby.
Discussion: https://postgr.es/m/7e2cb85d-24cf-4abb-30a5-1a33715959bd@postgrespro.ru
Previously, psql printed only the last result if a command string
returned multiple result sets. Now it prints all of them. The
previous behavior can be obtained by setting the psql variable
SHOW_ALL_RESULTS to off.
This is a significantly enhanced version of
3a51306722 (that was later reverted).
There is also much more test coverage for various psql features now.
Author: Fabien COELHO <coelho@cri.ensmp.fr>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: "Iwata, Aya" <iwata.aya@jp.fujitsu.com> (earlier version)
Reviewed-by: Daniel Verite <daniel@manitou-mail.org> (earlier version)
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com> (earlier version)
Reviewed-by: vignesh C <vignesh21@gmail.com> (earlier version)
Discussion: https://www.postgresql.org/message-id/flat/alpine.DEB.2.21.1904132231510.8961@lancre
This script runs the core regression tests with quite a small value of
shared_buffers, making it prone to breakage due to synchronize_seqscans
kicking in where the tests don't expect that. Disable that feature to
stabilize the tests.
Discussion: https://postgr.es/m/1258185.1648876239@sss.pgh.pa.us
datetime.c's parsing logic has assumed that strtod() will accept
a string that looks like ".", which it does in glibc, but not on
some less-common platforms such as AIX. The result of this was
that datetime fields like "123." would be accepted on some platforms
but not others; which is a sufficiently odd case that it's not that
surprising we've heard no field complaints. But commit e39f99046
extended that assumption to new places, and happened to add a test
case that exposed the platform dependency. Remove this dependency
by special-casing situations without any digits after the decimal
point.
(Again, this is in part a pre-existing bug but I don't feel a
compulsion to back-patch.)
Also, rearrange e39f99046's changes in formatting.c to avoid a
Coverity complaint that we were copying an uninitialized field.
Discussion: https://postgr.es/m/1592893.1648969747@sss.pgh.pa.us
When VACUUM set relfrozenxid before now, it set it to whatever value was
used to determine which tuples to freeze -- the FreezeLimit cutoff.
This approach was very naive. The relfrozenxid invariant only requires
that new relfrozenxid values be <= the oldest extant XID remaining in
the table (at the point that the VACUUM operation ends), which in
general might be much more recent than FreezeLimit.
VACUUM now carefully tracks the oldest remaining XID/MultiXactId as it
goes (the oldest remaining values _after_ lazy_scan_prune processing).
The final values are set as the table's new relfrozenxid and new
relminmxid in pg_class at the end of each VACUUM. The oldest XID might
come from a tuple's xmin, xmax, or xvac fields. It might even come from
one of the table's remaining MultiXacts.
Final relfrozenxid values must still be >= FreezeLimit in an aggressive
VACUUM (FreezeLimit still acts as a lower bound on the final value that
aggressive VACUUM can set relfrozenxid to). Since standard VACUUMs
still make no guarantees about advancing relfrozenxid, they might as
well set relfrozenxid to a value from well before FreezeLimit when the
opportunity presents itself. In general standard VACUUMs may now set
relfrozenxid to any value > the original relfrozenxid and <= OldestXmin.
Credit for the general idea of using the oldest extant XID to set
pg_class.relfrozenxid at the end of VACUUM goes to Andres Freund.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzkymFbz6D_vL+jmqSn_5q1wsFvFrE+37yLgL_Rkfd6Gzg@mail.gmail.com
DecodeInterval (interval input) was careless about integer-overflow
hazards, allowing bogus results to be obtained for sufficiently
large input values. Also, since it initially converted the input
to a "struct tm", it was impossible to produce the full range of
representable interval values.
Meanwhile, EncodeInterval (interval output) and a few other
functions could suffer failures if asked to process sufficiently
large interval values, because they also relied on being able to
represent an interval in "struct tm" which is not designed to
handle that.
Fix all this stuff by introducing new struct types that are more
fit for purpose.
While this is clearly a bug fix, it's also an API break for any
code that's calling these functions directly. So back-patching
doesn't seem wise, especially in view of the lack of field
complaints.
Joe Koshakow, editorialized a bit by me
Discussion: https://postgr.es/m/CAAvxfHff0JLYHwyBrtMx_=6wr=k2Xp+D+-X3vEhHjJYMj+mQcg@mail.gmail.com
Cover some cases that would have been broken by a proposed patch,
but we failed to notice for lack of test coverage. I'm pushing
this separately mainly to memorialize that it *is* our historical
behavior.
Discussion: https://postgr.es/m/1344498.1648920056@sss.pgh.pa.us
This is essentially the same as applying VACUUM FULL to a partitioned
table, which has been supported since commit 3c3bb99330 (March 2017).
While there's no great use case in applying CLUSTER to partitioned
tables, we don't have any strong reason not to allow it either.
For now, partitioned indexes cannot be marked clustered, so an index
must always be specified.
While at it, rename some variables that were RangeVars during the
development that led to 8bc717cb88 but never made it that way to the
source tree; there's no need to perpetuate names that have always been
more confusing than helpful.
Author: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/20201028003312.GU9241@telsasoft.com
Discussion: https://postgr.es/m/20200611153502.GT14879@telsasoft.com
The buildfarm has revealed some instability in results from catalog
queries in tests from commit 1a36bc9dba. Cure this by adding ORDER BY
to such queries.
The current implementation supports exactly one IP address in a server
certificate's Common Name, which is brittle (the strings must match
exactly). This patch adds support for IPv4 and IPv6 addresses in a
server's Subject Alternative Names.
Per discussion on-list:
- If the client's expected host is an IP address, we allow fallback to
the Subject Common Name if an iPAddress SAN is not present, even if
a dNSName is present. This matches the behavior of NSS, in
violation of the relevant RFCs.
- We also, counter-intuitively, match IP addresses embedded in dNSName
SANs. From inspection this appears to have been the behavior since
the SAN matching feature was introduced in acd08d76.
- Unlike NSS, we don't map IPv4 to IPv6 addresses, or vice-versa.
Author: Jacob Champion <pchampion@vmware.com>
Co-authored-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Co-authored-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://www.postgresql.org/message-id/flat/9f5f20974cd3a4091a788cf7f00ab663d5fcdffe.camel@vmware.com
This patch is extracted from a larger patch that allowed setting the
default returned value from these functions to json or jsonb. That had
problems, but this piece of it is fine. For these functions only json or
jsonb can be specified in the RETURNING clause.
Extracted from an original patch from Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Commit fb16d2c658 used the old but not quite old enough parent module,
which dates to perl version 5.10.1 as a core module. We still have a
dinosaur or two running older versions of perl, so rather than require
an upgrade in those we simply do in place what parent.pm's import()
would have done for us.
Reviewed by Tom Lane
Discussion: https://postgr.es/m/474104.1648685981@sss.pgh.pa.us
When we create or alter a subscription to add publications raise a warning
for non-existent publications. We don't want to give an error here because
it is possible that users can later create the missing publications.
Author: Vignesh C
Reviewed-by: Bharath Rupireddy, Japin Li, Dilip Kumar, Euler Taveira, Ashutosh Sharma, Amit Kapila
Discussion: https://postgr.es/m/CALDaNm0f4YujGW+q-Di0CbZpnQKFFrXntikaQQKuEmGG0=Zw=Q@mail.gmail.com
When evaluating a query with a multi-column GROUP BY clause using sort,
the cost may be heavily dependent on the order in which the keys are
compared when building the groups. Grouping does not imply any ordering,
so we're allowed to compare the keys in arbitrary order, and a Hash Agg
leverages this. But for Group Agg, we simply compared keys in the order
as specified in the query. This commit explores alternative ordering of
the keys, trying to find a cheaper one.
In principle, we might generate grouping paths for all permutations of
the keys, and leave the rest to the optimizer. But that might get very
expensive, so we try to pick only a couple interesting orderings based
on both local and global information.
When planning the grouping path, we explore statistics (number of
distinct values, cost of the comparison function) for the keys and
reorder them to minimize comparison costs. Intuitively, it may be better
to perform more expensive comparisons (for complex data types etc.)
last, because maybe the cheaper comparisons will be enough. Similarly,
the higher the cardinality of a key, the lower the probability we’ll
need to compare more keys. The patch generates and costs various
orderings, picking the cheapest ones.
The ordering of group keys may interact with other parts of the query,
some of which may not be known while planning the grouping. E.g. there
may be an explicit ORDER BY clause, or some other ordering-dependent
operation, higher up in the query, and using the same ordering may allow
using either incremental sort or even eliminate the sort entirely.
The patch generates orderings and picks those minimizing the comparison
cost (for various pathkeys), and then adds orderings that might be
useful for operations higher up in the plan (ORDER BY, etc.). Finally,
it always keeps the ordering specified in the query, on the assumption
the user might have additional insights.
This introduces a new GUC enable_group_by_reordering, so that the
optimization may be disabled if needed.
The original patch was proposed by Teodor Sigaev, and later improved and
reworked by Dmitry Dolgov. Reviews by a number of people, including me,
Andrey Lepikhov, Claudio Freire, Ibrar Ahmed and Zhihong Yu.
Author: Dmitry Dolgov, Teodor Sigaev, Tomas Vondra
Reviewed-by: Tomas Vondra, Andrey Lepikhov, Claudio Freire, Ibrar Ahmed, Zhihong Yu
Discussion: https://postgr.es/m/7c79e6a5-8597-74e8-0671-1c39d124c9d6%40sigaev.ru
Discussion: https://postgr.es/m/CA%2Bq6zcW_4o2NC0zutLkOJPsFt80megSpX_dVRo6GK9PC-Jx_Ag%40mail.gmail.com
This Patch introduces three SQL standard JSON functions:
JSON() (incorrectly mentioned in my commit message for f4fb45d15c)
JSON_SCALAR()
JSON_SERIALIZE()
JSON() produces json values from text, bytea, json or jsonb values, and
has facilitites for handling duplicate keys.
JSON_SCALAR() produces a json value from any scalar sql value, including
json and jsonb.
JSON_SERIALIZE() produces text or bytea from input which containis or
represents json or jsonb;
For the most part these functions don't add any significant new
capabilities, but they will be of use to users wanting standard
compliant JSON handling.
Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
We do this via a subclass for any branch older than the minimum known
to be compatible with the main package (currently release 12).
This should be useful for constructing cross-version tests.
In theory this could be extended back any number of versions, with
varying degrees of compatibility.
Reviewed by Michael Paquier and Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/a3efd19a-d5c9-fdf2-6094-4cde056a2708@dunslane.net
COPY FROM supports the HEADER option to silently discard the header
line from a CSV or text file. It is possible to load by mistake a
file that matches the expected format, for example, if two text
columns have been swapped, resulting in garbage in the database.
This adds a new option value HEADER MATCH that checks the column names
in the header line against the actual column names and errors out if
they do not match.
Author: Rémi Lapeyre <remi.lapeyre@lenstra.fr>
Reviewed-by: Daniel Verite <daniel@manitou-mail.org>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/CAF1-J-0PtCWMeLtswwGV2M70U26n4g33gpe1rcKQqe6wVQDrFA@mail.gmail.com
The current logical replication behavior is to send every transaction to
subscriber even if the transaction is empty. This can happen because
transaction doesn't contain changes from the selected publications or all
the changes got filtered. It is a waste of CPU cycles and network
bandwidth to build/transmit these empty transactions.
This patch addresses the above problem by postponing the BEGIN message
until the first change is sent. While processing a COMMIT message, if
there was no other change for that transaction, do not send the COMMIT
message. This allows us to skip sending BEGIN/COMMIT messages for empty
transactions.
When skipping empty transactions in synchronous replication mode, we send
a keepalive message to avoid delaying such transactions.
Author: Ajin Cherian, Hou Zhijie, Euler Taveira
Reviewed-by: Peter Smith, Takamichi Osumi, Shi Yu, Masahiko Sawada, Greg Nancarrow, Vignesh C, Amit Kapila
Discussion: https://postgr.es/m/CAMkU=1yohp9-dv48FLoSPrMqYEyyS5ZWkaZGD41RJr10xiNo_Q@mail.gmail.com
Curently, some TAP test that directly call the underlying function
PostgreSQL::Test::Utils::run_log() care about the return value, but
none of those that call it via PostgreSQL::Test::Cluster::run_log() care.
However, I'd like to add a test that will care, so adjust this function
to return whatever it gets back from the underlying function, just as
we do for a number of other functions in this module.
Discussion: http://postgr.es/m/CA+Tgmobj6u-nWF-j=FemygUhobhryLxf9h-wJN7W-2rSsseHNA@mail.gmail.com
This introduces the SQL/JSON functions for querying JSON data using
jsonpath expressions. The functions are:
JSON_EXISTS()
JSON_QUERY()
JSON_VALUE()
All of these functions only operate on jsonb. The workaround for now is
to cast the argument to jsonb.
JSON_EXISTS() tests if the jsonpath expression applied to the jsonb
value yields any values. JSON_VALUE() must return a single value, and an
error occurs if it tries to return multiple values. JSON_QUERY() must
return a json object or array, and there are various WRAPPER options for
handling scalar or multi-value results. Both these functions have
options for handling EMPTY and ERROR conditions.
Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
This view is similar to pg_hba_file_rules view, except that it is
associated with the parsing of pg_ident.conf. Similarly to its cousin,
this view is useful to check via SQL if changes planned in pg_ident.conf
would work upon reload or restart, or to diagnose a previous failure.
Bumps catalog version.
Author: Julien Rouhaud
Reviewed-by: Aleksander Alekseev, Michael Paquier
Discussion: https://postgr.es/m/20220223045959.35ipdsvbxcstrhya@jrouhaud
The regression tests include a query to check the execution path of
pg_hba_file_rules, but it has never checked that a given cluster has
correct contents in pg_hba.conf. This commit extends the query of
pg_hba_file_rules to report any errors if anything bad is found. For
EXEC_BACKEND builds, any connection attempt would fail when loading
pg_hba.conf if any incorrect content is found when parsed, so a failure
would be detected before even running this query. However, this can
become handy for clusters where pg_hba.conf can be reloaded, where new
connection attempts are not subject to a fresh loading of pg_hba.conf.
Author: Julien Rouhaud, based on an idea from me
Discussion: https://postgr.es/m/YkFhpydhyeNNo3Xl@paquier.xyz
This patch intrdocuces the SQL standard IS JSON predicate. It operates
on text and bytea values representing JSON as well as on the json and
jsonb types. Each test has an IS and IS NOT variant. The tests are:
IS JSON [VALUE]
IS JSON ARRAY
IS JSON OBJECT
IS JSON SCALAR
IS JSON WITH | WITHOUT UNIQUE KEYS
These are mostly self-explanatory, but note that IS JSON WITHOUT UNIQUE
KEYS is true whenever IS JSON is true, and IS JSON WITH UNIQUE KEYS is
true whenever IS JSON is true except it IS JSON OBJECT is true and there
are duplicate keys (which is never the case when applied to jsonb values).
Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Generally if a role is granted membership to another role with NOINHERIT
they must use SET ROLE to access the privileges of that role, however
with predefined roles the membership and privilege is conflated. Fix that
by replacing is_member_of_role with has_privs_for_role for predefined
roles. Patch does not remove is_member_of_role from acl.h, but it does
add a warning not to use that function for privilege checking. Not
backpatched based on hackers list discussion.
Author: Joshua Brindle
Reviewed-by: Stephen Frost, Nathan Bossart, Joe Conway
Discussion: https://postgr.es/m/flat/CAGB+Vh4Zv_TvKt2tv3QNS6tUM_F_9icmuj0zjywwcgVi4PAhFA@mail.gmail.com
Commit f9fd176461 effectively gave
every role ADMIN OPTION on itself. However, this appears to be
something that happened accidentally as a result of refactoring
work rather than an intentional decision. Almost a decade later,
it was discovered that this was a security vulnerability. As a
result, commit fea164a72a restricted
this implicit ADMIN OPTION privilege to be exercisable only when
the role being administered is the same as the session user and
when no security-restricted operation is in progress. That
commit also documented the existence of this implicit privilege
for what seems to be the first time.
The effect of the privilege is to allow a login role to grant
the privileges of that role, and optionally ADMIN OPTION on it,
to some other role. That's an unusual thing to do, because generally
membership is granted in roles used as groups, rather than roles
used as users. Therefore, it does not seem likely that removing
the privilege will break things for many PostgreSQL users.
However, it will make it easier to reason about the permissions
system. This is the only case where a user who has not been given any
special permission (superuser, or ADMIN OPTION on some role) can
modify role membership, so removing it makes things more consistent.
For example, if a superuser sets up role A and B and grants A to B
but no other privileges to anyone, she can now be sure that no one
else will be able to revoke that grant. Without this change, that
would have been true only if A was a non-login role.
Patch by me. Reviewed by Tom Lane and Stephen Frost.
Discussion: http://postgr.es/m/CA+Tgmoawdt03kbA+dNyBcNWJpRxu0f4X=69Y3+DkXXZqmwMDLg@mail.gmail.com
MERGE performs actions that modify rows in the target table using a
source table or query. MERGE provides a single SQL statement that can
conditionally INSERT/UPDATE/DELETE rows -- a task that would otherwise
require multiple PL statements. For example,
MERGE INTO target AS t
USING source AS s
ON t.tid = s.sid
WHEN MATCHED AND t.balance > s.delta THEN
UPDATE SET balance = t.balance - s.delta
WHEN MATCHED THEN
DELETE
WHEN NOT MATCHED AND s.delta > 0 THEN
INSERT VALUES (s.sid, s.delta)
WHEN NOT MATCHED THEN
DO NOTHING;
MERGE works with regular tables, partitioned tables and inheritance
hierarchies, including column and row security enforcement, as well as
support for row and statement triggers and transition tables therein.
MERGE is optimized for OLTP and is parameterizable, though also useful
for large scale ETL/ELT. MERGE is not intended to be used in preference
to existing single SQL commands for INSERT, UPDATE or DELETE since there
is some overhead. MERGE can be used from PL/pgSQL.
MERGE does not support targetting updatable views or foreign tables, and
RETURNING clauses are not allowed either. These limitations are likely
fixable with sufficient effort. Rewrite rules are also not supported,
but it's not clear that we'd want to support them.
Author: Pavan Deolasee <pavan.deolasee@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Simon Riggs <simon.riggs@enterprisedb.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier versions)
Reviewed-by: Peter Geoghegan <pg@bowt.ie> (earlier versions)
Reviewed-by: Robert Haas <robertmhaas@gmail.com> (earlier versions)
Reviewed-by: Japin Li <japinli@hotmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Discussion: https://postgr.es/m/CANP8+jKitBSrB7oTgT9CY2i1ObfOt36z0XMraQc+Xrz8QB0nXA@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-WzkJdBuxj9PO=2QaO9-3h3xGbQPZ34kJH=HukRekwM-GZg@mail.gmail.com
Discussion: https://postgr.es/m/20201231134736.GA25392@alvherre.pgsql
Per ECMAScript standard (ECMA-262, referenced by SQL standard), the
syntax forms
.1
1.
should be allowed for decimal numeric literals, but the existing
implementation rejected them.
Also, by the same standard, reject trailing junk after numeric
literals.
Note that the ECMAScript standard for numeric literals is in respects
like these slightly different from the JSON standard, which might be
the original cause for this discrepancy.
A change is that this kind of syntax is now rejected:
1.type()
This needs to be written as
(1).type()
This is correct; normal JavaScript also does not accept this syntax.
We also need to fix up the jsonpath output function for this case. We
put parentheses around numeric items if they are followed by another
path item.
Reviewed-by: Nikita Glukhov <n.gluhov@postgrespro.ru>
Discussion: https://www.postgresql.org/message-id/flat/50a828cc-0a00-7791-7883-2ed06dfb2dbb@enterprisedb.com
So far the first of the retries introduced in f28bf667f6 resolves the
issue. But I (Andres) am still suspicious that the start of the failures might
indicate a problem.
To reduce noise, stop reporting a failure if a retry resolves the problem. To
allow figuring out what causes the slow slot drop, add a few more debug
messages to ReplicationSlotDropPtr.
See also commit afdeff1052, fe0972ee5e and f28bf667f6.
Discussion: https://postgr.es/m/20220327213219.smdvfkq2fl74flow@alap3.anarazel.de
pg_stat_get_replication_slot() accidentally was marked as non-strict, crashing
when called with NULL input. As it's already released, introduce an explicit
NULL check in 14, fix the catalog in HEAD.
Bumps catversion in HEAD.
Discussion: https://postgr.es/m/20220326212432.s5n2maw6kugnpyxw@alap3.anarazel.de
Backpatch: 14-, where replication slot stats were introduced
This patch introduces the SQL/JSON standard constructors for JSON:
JSON()
JSON_ARRAY()
JSON_ARRAYAGG()
JSON_OBJECT()
JSON_OBJECTAGG()
For the most part these functions provide facilities that mimic
existing json/jsonb functions. However, they also offer some useful
additional functionality. In addition to text input, the JSON() function
accepts bytea input, which it will decode and constuct a json value from.
The other functions provide useful options for handling duplicate keys
and null values.
This series of patches will be followed by a consolidated documentation
patch.
Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
This is a follow-up to commit 7dac61402 which removed a set of unused
modules from the TAP test.
The Config references in the pg_ctl and pg_rewind tests were removed
in commit 1c6d46293. Fcntl ':mode' and File::stat in the pg_ctl test
were added in c37b3d08c which was probably a leftover from an earlier
version of the patch, as the function using these was added to another
module in that commit.
The Config reference in the ldap test was added in ee56c3b21 which in
turn use $^O instead of interrogating Config.
Author: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Discussion: https://postgr.es/m/87lewyqk45.fsf@wibble.ilmari.org
One of the TAP tests added in 923def9a53 did not wait after creating a
subscription, and wait_for_catchup is not sufficient for this. So if the
tablesync workers happen do not complete quickly enough, the test won't
see the expected results.
This probably explains intermittent failures on a couple buildfarm
animals (komodoensis, petalura and snapper).
Reported-by: Tom Lane
Discussion: https://postgr.es/m/170549.1648330634@sss.pgh.pa.us
The SSL TAP tests were tightly coupled to the OpenSSL implementation,
making it hard to add support for additional SSL/TLS backends. This
refactoring makes the test avoid depending on specific implementations
The SSLServer Perl module is renamed SSL::Server, which in turn use
SSL::Backend::X where X is the backend pointed to by with_ssl. Each
backend will implement its own module responsible for setting up keys,
certs and to resolve sslkey values to their implementation specific
value (file paths or vault nicknames etc). Further, switch_server_cert
now takes a set of named parameters rather than a fixed set which used
defaults. The modules also come with POD documentation.
There are a few testcases which still use OpenSSL specifics, but it's
not entirely clear how to abstract those until we have another library
implemented.
Original patch by me, with lots of rework by Andrew Dunstan to turn it
into better Perl.
Discussion: https://postgr.es/m/AA18A362-CA65-4F9A-AF61-76AE318FE97C@yesql.se
This allows specifying an optional column list when adding a table to
logical replication. The column list may be specified after the table
name, enclosed in parentheses. Columns not included in this list are not
sent to the subscriber, allowing the schema on the subscriber to be a
subset of the publisher schema.
For UPDATE/DELETE publications, the column list needs to cover all
REPLICA IDENTITY columns. For INSERT publications, the column list is
arbitrary and may omit some REPLICA IDENTITY columns. Furthermore, if
the table uses REPLICA IDENTITY FULL, column list is not allowed.
The column list can contain only simple column references. Complex
expressions, function calls etc. are not allowed. This restriction could
be relaxed in the future.
During the initial table synchronization, only columns included in the
column list are copied to the subscriber. If the subscription has
several publications, containing the same table with different column
lists, columns specified in any of the lists will be copied.
This means all columns are replicated if the table has no column list
at all (which is treated as column list with all columns), or when of
the publications is defined as FOR ALL TABLES (possibly IN SCHEMA that
matches the schema of the table).
For partitioned tables, publish_via_partition_root determines whether
the column list for the root or the leaf relation will be used. If the
parameter is 'false' (the default), the list defined for the leaf
relation is used. Otherwise, the column list for the root partition
will be used.
Psql commands \dRp+ and \d <table-name> now display any column lists.
Author: Tomas Vondra, Alvaro Herrera, Rahila Syed
Reviewed-by: Peter Eisentraut, Alvaro Herrera, Vignesh C, Ibrar Ahmed,
Amit Kapila, Hou zj, Peter Smith, Wang wei, Tang, Shi yu
Discussion: https://postgr.es/m/CAH2L28vddB_NFdRVpuyRBJEBWjz4BSyTB=_ektNRH8NJ1jf95g@mail.gmail.com
The previous method for doing that was to write zeroes into a
predetermined set of page locations. However, there's a roughly
1-in-64K chance that the existing checksum will match by chance,
and yesterday several buildfarm animals started to reproducibly
see that, resulting in test failures because no checksum mismatch
was reported.
Since the checksum includes the page LSN, test success depends on
the length of the installation's WAL history, which is affected by
(at least) the initial catalog contents, the set of locales installed
on the system, and the length of the pathname of the test directory.
Sooner or later we were going to hit a chance match, and today is
that day.
Harden these tests by specifically inverting the checksum field and
leaving all else alone, thereby guaranteeing that the checksum is
incorrect.
In passing, fix places that were using seek() to set up for syswrite(),
a combination that the Perl docs very explicitly warn against. We've
probably escaped problems because no regular buffered I/O is done on
these filehandles; but if it ever breaks, we wouldn't deserve or get
much sympathy.
Although we've only seen problems in HEAD, now that we recognize the
environmental dependencies it seems like it might be just a matter
of time until someone manages to hit this in back-branch testing.
Hence, back-patch to v11 where we started doing this kind of test.
Discussion: https://postgr.es/m/3192026.1648185780@sss.pgh.pa.us
Commit 75b1521dae added support for logical replication of sequences,
including grammar changes, but it did not update preprocess_pubobj_list
accordingly. This can cause segfaults with "continuations", i.e. when
command specifies a list of objects:
CREATE PUBLICATION p FOR SEQUENCE s1, s2;
Reported by Amit Kapila, patch by me.
Reported-by: Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1JxDNKGBSNTyN-Xj2JRjzFo+ziSqJbjH==vuO0YF_CQrg@mail.gmail.com
Crash recovery on standby may encounter missing directories when
replaying create database WAL records. Prior to this patch, the standby
would fail to recover in such a case. However, the directories could be
legitimately missing. Consider a sequence of WAL records as follows:
CREATE DATABASE
DROP DATABASE
DROP TABLESPACE
If, after replaying the last WAL record and removing the tablespace
directory, the standby crashes and has to replay the create database
record again, the crash recovery must be able to move on.
This patch adds a mechanism similar to invalid-page tracking, to keep a
tally of missing directories during crash recovery. If all the missing
directory references are matched with corresponding drop records at the
end of crash recovery, the standby can safely continue following the
primary.
Backpatch to 13, at least for now. The bug is older, but fixing it in
older branches requires more careful study of the interactions with
commit e6d8069522, which appeared in 13.
A new TAP test file is added to verify the condition. However, because
it depends on commit d6d317dbf6, it can only be added to branch
master. I (Álvaro) manually verified that the code behaves as expected
in branch 14. It's a bit nervous-making to leave the code uncovered by
tests in older branches, but leaving the bug unfixed is even worse.
Also, the main reason this fix took so long is precisely that we
couldn't agree on a good strategy to approach testing for the bug, so
perhaps this is the best we can do.
Diagnosed-by: Paul Guo <paulguo@gmail.com>
Author: Paul Guo <paulguo@gmail.com>
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Asim R Praveen <apraveen@pivotal.io>
Discussion: https://postgr.es/m/CAEET0ZGx9AvioViLf7nbR_8tH9-=27DN5xWJ2P9-ROH16e4JUA@mail.gmail.com
Move DLSUFFIX from makefiles into header files for all platforms.
Move the DLSUFFIX assignment from src/makefiles/ to src/templates/,
have configure read it, and then substitute it into Makefile.global
and pg_config.h. This avoids the need for all makefile rules that
need it to locally set CPPFLAGS. It also resolves an inconsistent
setup between the two Windows build systems.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/2f9861fb-8969-9005-7518-b8e60f2bead9@enterprisedb.com
Tom noticed evidence in the buildfarm suggesting the failures might just be
really slow process exits. To investigate further, instead of giving up after
seeing multiple walsender pids once, retry. For now continue to report test
failure if a retry succeeds.
See also commit afdeff1052 and fe0972ee5e.
Per suggestion from Tom Lane.
Discussion: https://postgr.es/m/3042597.1648148740@sss.pgh.pa.us
A TOAST table can normally have only one index, but there are corner
cases where it has more; for example, transiently during REINDEX
CONCURRENTLY. In such a case, the pg_statio_all_tables view produced
multiple rows for the owning table, one per TOAST index. Refactor the
view to avoid that, instead summing the stats across all the indexes,
as we do for regular table indexes.
While this has been wrong for a long time, back-patching seems unwise
due to the difficulty of putting a system view change into back
branches.
Andrei Zubkov, tweaked a bit by me
Discussion: https://postgr.es/m/acefef4189706971fc475f912c1afdab1c48d627.camel@moonset.ru
The Config and Cwd modules were no longer used, but remained imported,
in a number of tests. Remove to keep the imports to the actually used
modules.
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/A5A074CD-3198-492B-BE5E-7961EFC3733F@yesql.se
This commit adds support for decoding of sequences to the built-in
replication (the infrastructure was added by commit 0da92dc530).
The syntax and behavior mostly mimics handling of tables, i.e. a
publication may be defined as FOR ALL SEQUENCES (replicating all
sequences in a database), FOR ALL SEQUENCES IN SCHEMA (replicating
all sequences in a particular schema) or individual sequences.
To publish sequence modifications, the publication has to include
'sequence' action. The protocol is extended with a new message,
describing sequence increments.
A new system view pg_publication_sequences lists all the sequences
added to a publication, both directly and indirectly. Various psql
commands (\d and \dRp) are improved to also display publications
including a given sequence, or sequences included in a publication.
Author: Tomas Vondra, Cary Huang
Reviewed-by: Peter Eisentraut, Amit Kapila, Hannu Krosing, Andres
Freund, Petr Jelinek
Discussion: https://postgr.es/m/d045f3c2-6cfb-06d3-5540-e63c320df8bc@enterprisedb.com
Discussion: https://postgr.es/m/1710ed7e13b.cd7177461430746.3372264562543607781@highgo.ca
Invalidate abortedRecPtr and missingContrecPtr after a missing
continuation record is successfully skipped on a standby. This fixes a
PANIC caused when a recently promoted standby attempts to write an
OVERWRITE_RECORD with an LSN of the previously read aborted record.
Backpatch to 10 (all stable versions).
Author: Sami Imseih <simseih@amazon.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/44D259DE-7542-49C4-8A52-2AB01534DCA9@amazon.com
Commit 90efa2f556 caused some issues with EXEC_BACKEND builds and with
force_parallel_mode = regress setups. For the first issue we no longer
test if the module has been preloaded, and in fact we don't preload it,
but simply LOAD it in the test script. For the second issue we suppress
error messages emanating from parallel workers.
Mark Dilger
Discussion: https://postgr.es/m/7f6d54a1-4024-3b6e-e3ec-26cd394aac9e@dunslane.net
This includes tests of both the newly added name type object access
hooks and the older Oid type hooks, and provides a useful example
of how to use the hooks.
Mark Dilger, based on some code from Joshua Brindle.
Discussion: https://postgr.es/m/47F87A0E-C0E5-43A6-89F6-D403F2B45175@enterprisedb.com
A security invoker view checks permissions for accessing its
underlying base relations using the privileges of the user of the
view, rather than the privileges of the view owner. Additionally, if
any of the base relations are tables with RLS enabled, the policies of
the user of the view are applied, rather than those of the view owner.
This allows views to be defined without giving away additional
privileges on the underlying base relations, and matches a similar
feature available in other database systems.
It also allows views to operate more naturally with RLS, without
affecting the assignments of policies to users.
Christoph Heiss, with some additional hacking by me. Reviewed by
Laurenz Albe and Wolfgang Walther.
Discussion: https://postgr.es/m/b66dd6d6-ad3e-c6f2-8b90-47be773da240%40cybertec.at
This issue is environment-sensitive, where the SSL tests could fail in
various way by feeding on defaults provided by sslcert, sslkey,
sslrootkey, sslrootcert, sslcrl and sslcrldir coming from a local setup,
as of ~/.postgresql/ by default. Horiguchi-san has reported two
failures, but more advanced testing from me (aka inclusion of garbage
SSL configuration in ~/.postgresql/ for all the configuration
parameters) has showed dozens of failures that can be triggered in the
whole test suite.
History has showed that we are not good when it comes to address such
issues, fixing them locally like in dd87799, and such problems keep
appearing. This commit strengthens the entire test suite to put an end
to this set of problems by embedding invalid default values in all the
connection strings used in the tests. The invalid values are prefixed
in each connection string, relying on the follow-up values passed in the
connection string to enforce any invalid value previously set. Note
that two tests related to CRLs are required to fail with certain pre-set
configurations, but we can rely on enforcing an empty value instead
after the invalid set of values.
Reported-by: Kyotaro Horiguchi
Reviewed-by: Andrew Dunstan, Daniel Gustafsson, Kyotaro Horiguchi
Discussion: https://postgr.es/m/20220316.163658.1122740600489097632.horikyota.ntt@gmail.com
backpatch-through: 10
This feature allows skipping the transaction on subscriber nodes.
If incoming change violates any constraint, logical replication stops
until it's resolved. Currently, users need to either manually resolve the
conflict by updating a subscriber-side database or by using function
pg_replication_origin_advance() to skip the conflicting transaction. This
commit introduces a simpler way to skip the conflicting transactions.
The user can specify LSN by ALTER SUBSCRIPTION ... SKIP (lsn = XXX),
which allows the apply worker to skip the transaction finished at
specified LSN. The apply worker skips all data modification changes within
the transaction.
Author: Masahiko Sawada
Reviewed-by: Takamichi Osumi, Hou Zhijie, Peter Eisentraut, Amit Kapila, Shi Yu, Vignesh C, Greg Nancarrow, Haiying Tang, Euler Taveira
Discussion: https://postgr.es/m/CAD21AoDeScrsHhLyEPYqN3sydg6PxAPVBboK=30xJfUVihNZDA@mail.gmail.com
The planner needs to treat GroupingFunc like Aggref for many purposes,
in particular with respect to processing of the argument expressions,
which are not to be evaluated at runtime. A few places hadn't gotten
that memo, notably including subselect.c's processing of outer-level
aggregates. This resulted in assertion failures or wrong plans for
cases in which a GROUPING() construct references an outer aggregation
level.
Also fix missing special cases for GroupingFunc in cost_qual_eval
(resulting in wrong cost estimates for GROUPING(), although it's
not clear that that would affect plan shapes in practice) and in
ruleutils.c (resulting in excess parentheses in pretty-print mode).
Per bug #17088 from Yaoguang Chen. Back-patch to all supported
branches.
Richard Guo, Tom Lane
Discussion: https://postgr.es/m/17088-e33882b387de7f5c@postgresql.org
For GENERATED columns, we record all dependencies of the generation
expression as AUTO dependencies of the column itself. This means
that the generated column is silently dropped if any dependency
is removed, even if CASCADE wasn't specified. This is at least
a POLA violation, but I think it's actually based on a misreading
of the standard. The standard does say that you can't drop a
dependent GENERATED column in RESTRICT mode; but that's buried down
in a subparagraph, on a different page from some pseudocode that
makes it look like an AUTO drop is being suggested.
Change this to be more like the way that we handle regular default
expressions, ie record the dependencies as NORMAL dependencies of
the pg_attrdef entry. Also, make the pg_attrdef entry's dependency
on the column itself be INTERNAL not AUTO. That has two effects:
* the column will go away, not just lose its default, if any
dependency of the expression is dropped with CASCADE. So we
don't need any special mechanism to make that happen.
* it provides an additional cross-check preventing someone from
dropping the default expression without dropping the column.
catversion bump because of change in the contents of pg_depend
(which also requires a change in one information_schema view).
Per bug #17439 from Kevin Humphreys. Although this is a longstanding
bug, it seems impractical to back-patch because of the need for
catalog contents changes.
Discussion: https://postgr.es/m/17439-7df4421197e928f0@postgresql.org
DROP INDEX needs to lock the index's table before the index itself,
else it will deadlock against ordinary queries that acquire the
relation locks in that order. This is correctly mechanized for
plain indexes by RangeVarCallbackForDropRelation; but in the case of
a partitioned index, we neglected to lock the child tables in advance
of locking the child indexes. We can fix that by traversing the
inheritance tree and acquiring the needed locks in RemoveRelations,
after we have acquired our locks on the parent partitioned table and
index.
While at it, do some refactoring to eliminate confusion between
the actual and expected relkind in RangeVarCallbackForDropRelation.
We can save a couple of syscache lookups too, by having that function
pass back info that RemoveRelations will need.
Back-patch to v11 where partitioned indexes were added.
Jimmy Yih, Gaurab Dey, Tom Lane
Discussion: https://postgr.es/m/BYAPR05MB645402330042E17D91A70C12BD5F9@BYAPR05MB6454.namprd05.prod.outlook.com
When an update on a partitioned table referenced in foreign key
constraints causes a row to move from one partition to another,
the fact that the move is implemented as a delete followed by an insert
on the target partition causes the foreign key triggers to have
surprising behavior. For example, a given foreign key's delete trigger
which implements the ON DELETE CASCADE clause of that key will delete
any referencing rows when triggered for that internal DELETE, although
it should not, because the referenced row is simply being moved from one
partition of the referenced root partitioned table into another, not
being deleted from it.
This commit teaches trigger.c to skip queuing such delete trigger events
on the leaf partitions in favor of an UPDATE event fired on the root
target relation. Doing so is sensible because both the old and the new
tuple "logically" belong to the root relation.
The after trigger event queuing interface now allows passing the source
and the target partitions of a particular cross-partition update when
registering the update event for the root partitioned table. Along with
the two ctids of the old and the new tuple, the after trigger event now
also stores the OIDs of those partitions. The tuples fetched from the
source and the target partitions are converted into the root table
format, if necessary, before they are passed to the trigger function.
The implementation currently has a limitation that only the foreign keys
pointing into the query's target relation are considered, not those of
its sub-partitioned partitions. That seems like a reasonable
limitation, because it sounds rare to have distinct foreign keys
pointing to sub-partitioned partitions instead of to the root table.
This misbehavior stems from commit f56f8f8da6 (which added support for
foreign keys to reference partitioned tables) not paying sufficient
attention to commit 2f17844104 (which had introduced cross-partition
updates a year earlier). Even though the former commit goes back to
Postgres 12, we're not backpatching this fix at this time for fear of
destabilizing things too much, and because there are a few ABI breaks in
it that we'd have to work around in older branches. It also depends on
commit f4566345cf, which had its own share of backpatchability issues
as well.
Author: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Eduard Català <eduard.catala@gmail.com>
Discussion: https://postgr.es/m/CA+HiwqFvkBCmfwkQX_yBqv2Wz8ugUGiBDxum8=WvVbfU1TXaNg@mail.gmail.com
Discussion: https://postgr.es/m/CAL54xNZsLwEM1XCk5yW9EqaRzsZYHuWsHQkA2L5MOSKXAwviCQ@mail.gmail.com
createdb() didn't check for collation attributes validity, which has
to be done explicitly on ICU < 54. It also forgot to close the ICU collator
opened during the check which leaks some memory.
To fix both, add a new check_icu_locale() that does all the appropriate
verification and close the ICU collator.
initdb also had some partial check for ICU < 54. To have consistent error
reporting across major ICU versions, and get rid of the need to include ucol.h,
remove the partial check there. The backend will report an error if needed
during the post-boostrap iniitialization phase.
Author: Julien Rouhaud <julien.rouhaud@free.fr>
Discussion: https://www.postgresql.org/message-id/20220319041459.qqqiqh335sga5ezj@jrouhaud
b048326 has added support for SET ACCESS METHOD in ALTER TABLE, but it
has missed a few things for materialized views:
- No documentation for this clause on the ALTER MATERIALIZED VIEW page.
- psql tab completion missing.
- No regression tests.
This commit closes the gap on all the points listed above.
Author: Yugo Nagata
Discussion: https://postgr.es/m/20220316133337.5dc9740abfa24c25ec9f67f5@sraoss.co.jp
The clauses SET TABLESPACE and ALL IN TABLESPACE are supported in ALTER
MATERIALIZED VIEW for a long time, and they behave mostly like ALTER
TABLE by reusing the same code paths, but there were zero tests for
them. This commit closes the gap with new tests in tablespace.sql.
Author: Yugo Nagata
Discussion: https://postgr.es/m/20220316133337.5dc9740abfa24c25ec9f67f5@sraoss.co.jp
Andres Freund
David Rowley
Tom Lane
Alvaro Herrera
Tomas Vondra
Peter Eisentraut
Thomas Munro
Amit Kapila
Stephen Frost
Andrew Dunstan
Peter Geoghegan
Daniel Gustafsson
Robert Haas
Michael Paquier
Joe Conway
Dean Rasheed