Represent a sequence's current value as a separate TableDataInfo dumpable
object, so that it can be dumped within the data section of the archive
rather than in pre-data. This fixes an undesirable inconsistency between
the meanings of "--data-only" and "--section=data", and also fixes dumping
of sequences that are marked as extension configuration tables, as per a
report from Marko Kreen back in July. The main cost is that we do one more
SQL query per sequence, but that's probably not very meaningful in most
databases.
Back-patch to 9.1, since it has the extension configuration issue even
though not the --section switch.
In commit 4317e0246c, I accidentally broke
this behavior while rearranging code to ensure that --create wouldn't
affect whether a DATABASE entry gets put into archive-format output.
Thus, 9.2 would issue a DROP DATABASE command in --clean mode, which is
either useless or dangerous depending on the usage scenario.
It should not do that, and no longer does.
A bright spot is that this refactoring makes it easy to allow the
combination of --clean and --create to work sensibly, ie, emit DROP
DATABASE then CREATE DATABASE before reconnecting. Ordinarily we'd
consider that a feature addition and not back-patch it, but it seems
silly to not include the extra couple of lines required in the 9.2
version of the code.
Per report from Guillaume Lelarge, though this is slightly more extensive
than his proposed patch.
The initial implementation of pg_dump's --section option supposed that the
existing --schema-only and --data-only options could be made equivalent to
--section settings. This is wrong, though, due to dubious but long since
set-in-stone decisions about where to dump SEQUENCE SET items, as seen in
bug report from Martin Pitt. (And I'm not totally convinced there weren't
other bugs, either.) Undo that coupling and instead drive --section
filtering off current-section state tracked as we scan through the TOC
list to call _tocEntryRequired().
To make sure those decisions don't shift around and hopefully save a few
cycles, run _tocEntryRequired() only once per TOC entry and save the result
in a new TOC field. This required minor rejiggering of ACL handling but
also allows a far cleaner implementation of inhibit_data_for_failed_table.
Also, to ensure that pg_dump and pg_restore have the same behavior with
respect to the --section switches, add _tocEntryRequired() filtering to
WriteToc() and WriteDataChunks(), rather than trying to implement section
filtering in an entirely orthogonal way in dumpDumpableObject(). This
required adjusting the handling of the special ENCODING and STDSTRINGS
items, but they were pretty weird before anyway.
Minor other code review for the patch, too.
initdb: Add -T option
oid2name: Put options in some non-random order
pg_dump: Put --section option in the right place
And some additional markup and terminology improvements.
The default for the choice attribute of the <arg> element is "opt",
which would normally put the argument inside brackets. But the DSSSL
stylesheets contain a hack that treats <arg> directly inside <group>
specially, so that <group><arg>-x</arg><arg>-y</arg></group> comes out
as [ -x | -y ] rather than [ [-x] | [-y] ], which it would technically
be. But when building man pages, this doesn't work, and so the
command synopses on the man pages contain lots of extra brackets.
By putting choice="opt" or choice="plain" explicitly on every <arg>
and <group> element, we avoid any toolchain dependencies like that,
and it also makes it clearer in the source code what is meant.
In passing, make some small corrections in the documentation about
which arguments are really optional or not.
Valid values are --pre-data, data and post-data. The option can be
given more than once. --schema-only is equivalent to
--section=pre-data --section=post-data. --data-only is equivalent
to --section=data.
Andrew Dunstan, reviewed by Joachim Wieland and Josh Berkus.
Andrew Dunstan, reviewed by Josh Berkus, Robert Haas and Peter Geoghegan.
This allows dumping of a table definition but not its data, on a per table basis.
Table name patterns are supported just as for --exclude-table.
There is what may actually be a mistake in our markup. The problem is
in a situation like
<para>
<command>FOO</command> is ...
there is strictly speaking a line break before "FOO". In the HTML
output, this does not appear to be a problem, but in the man page
output, this shows up, so you get double blank lines at odd places.
So far, we have attempted to work around this with an XSL hack, but
that causes other problems, such as creating run-ins in places like
<acronym>SQL</acronym> <command>COPY</command>
So fix the problem properly by removing the extra whitespace. I only
fixed the problems that affect the man page output, not all the
places.
For the --help output and reference pages of pg_dump, pg_dumpall,
pg_restore, put the options in some consistent, mostly alphabetical,
and consistent order, rather than newest option last or something like
that.
Until now, our Serializable mode has in fact been what's called Snapshot
Isolation, which allows some anomalies that could not occur in any
serialized ordering of the transactions. This patch fixes that using a
method called Serializable Snapshot Isolation, based on research papers by
Michael J. Cahill (see README-SSI for full references). In Serializable
Snapshot Isolation, transactions run like they do in Snapshot Isolation,
but a predicate lock manager observes the reads and writes performed and
aborts transactions if it detects that an anomaly might occur. This method
produces some false positives, ie. it sometimes aborts transactions even
though there is no anomaly.
To track reads we implement predicate locking, see storage/lmgr/predicate.c.
Whenever a tuple is read, a predicate lock is acquired on the tuple. Shared
memory is finite, so when a transaction takes many tuple-level locks on a
page, the locks are promoted to a single page-level lock, and further to a
single relation level lock if necessary. To lock key values with no matching
tuple, a sequential scan always takes a relation-level lock, and an index
scan acquires a page-level lock that covers the search key, whether or not
there are any matching keys at the moment.
A predicate lock doesn't conflict with any regular locks or with another
predicate locks in the normal sense. They're only used by the predicate lock
manager to detect the danger of anomalies. Only serializable transactions
participate in predicate locking, so there should be no extra overhead for
for other transactions.
Predicate locks can't be released at commit, but must be remembered until
all the transactions that overlapped with it have completed. That means that
we need to remember an unbounded amount of predicate locks, so we apply a
lossy but conservative method of tracking locks for committed transactions.
If we run short of shared memory, we overflow to a new "pg_serial" SLRU
pool.
We don't currently allow Serializable transactions in Hot Standby mode.
That would be hard, because even read-only transactions can cause anomalies
that wouldn't otherwise occur.
Serializable isolation mode now means the new fully serializable level.
Repeatable Read gives you the old Snapshot Isolation level that we have
always had.
Kevin Grittner and Dan Ports, reviewed by Jeff Davis, Heikki Linnakangas and
Anssi Kääriäinen
Foreign tables are a core component of SQL/MED. This commit does
not provide a working SQL/MED infrastructure, because foreign tables
cannot yet be queried. Support for foreign table scans will need to
be added in a future patch. However, this patch creates the necessary
system catalog structure, syntax support, and support for ancillary
operations such as COMMENT and SECURITY LABEL.
Shigeru Hanada, heavily revised by Robert Haas
The contents of an unlogged table are WAL-logged; thus, they are not
available on standby servers and are truncated whenever the database
system enters recovery. Indexes on unlogged tables are also unlogged.
Unlogged GiST indexes are not currently supported.
This is intended as infrastructure to support integration with label-based
mandatory access control systems such as SE-Linux. Further changes (mostly
hooks) will be needed, but this is a big chunk of it.
KaiGai Kohei and Robert Haas
I've added a quote_all_identifiers GUC which affects the behavior
of the backend, and a --quote-all-identifiers argument to pg_dump
and pg_dumpall which sets the GUC and also affects the quoting done
internally by those applications.
Design by Tom Lane; review by Alex Hunsaker; in response to bug #5488
filed by Hartmut Goebel.
is still available, but you must now write the long equivalent --inserts
or --column-inserts. This change is made to eliminate confusion with the
use of -d to specify a database name in most other Postgres client programs.
Original patch by Greg Mullane, modified per subsequent discussion.
performing dumps and restores in accordance with a security policy that
forbids logging in directly as superuser, but instead specifies that you
should log into an admin account and then SET ROLE to the superuser.
In passing, clean up some ugly and mostly-broken code for quoting shell
arguments in pg_dumpall.
Benedek László, with some help from Tom Lane
the server version check is now always enforced. Relax the version check to
allow a server that is of pg_dump's own major version but a later minor
version; this is the only case that -i was at all safe to use in.
pg_restore already enforced only a very weak version check, so this is
really just a documentation change for it.
Per discussion.
dumps can be loaded into databases without the same tablespaces that the
source had. The option acts by suppressing all "SET default_tablespace"
commands, and also CREATE TABLESPACE commands in pg_dumpall's case.
Gavin Roy, with documentation and minor fixes by me.
Magnus Hagander
Peter Eisentraut
Tom Lane
Andrew Dunstan
Bruce Momjian
Heikki Linnakangas
Robert Haas
Alvaro Herrera