a separate statement (though it can still be invoked as part of VACUUM, too).
pg_statistic redesigned to be more flexible about what statistics are
stored. ANALYZE now collects a list of several of the most common values,
not just one, plus a histogram (not just the min and max values). Random
sampling is used to make the process reasonably fast even on very large
tables. The number of values and histogram bins collected is now
user-settable via an ALTER TABLE command.
There is more still to do; the new stats are not being used everywhere
they could be in the planner. But the remaining changes for this project
should be localized, and the behavior is already better than before.
A not-very-related change is that sorting now makes use of btree comparison
routines if it can find one, rather than invoking '<' twice.
routine DetermineLocalTimeZone(). In that routine, be more wary of
broken mktime() implementations than the original code was: don't allow
mktime to change the already-set y/m/d/h/m/s information, and don't
use tm_gmtoff if mktime failed. Possibly this will resolve some of
the complaints we've been hearing from users of Middle Eastern timezones
on RedHat.
give consistent results for all datatypes. Types float4, float8, and
numeric were broken for NaN values; abstime, timestamp, and interval
were broken for INVALID values; timetz was just plain broken (some
possible pairs of values were neither < nor = nor >). Also clean up
text, bpchar, varchar, and bit/varbit to eliminate duplicate code and
thereby reduce the probability of similar inconsistencies arising in
the future.
as six bytes not eight. This fixes a regression test failure but more
importantly avoids wasting four bytes of pad space in every tuple header.
Also add some commentary about what's going on.
accepts nnnLL syntax for long long constants. If so, decorate the CRC64
constants with LL to avoid warnings and/or erroneous results from certain
non-standards-compliant compilers.
O_SYNC, or O_DSYNC (as available on a given platform). Add GUC parameter
to control sync method.
Also, add defense to XLogWrite to prevent it from going nuts if passed
a target write position that's past the end of the buffers so far filled
by XLogInsert.
detect case that next page in log came from an older run than the prior
page. This avoids the necessity to re-zero the log after recovery from
a crash, which is good because we need not risk destroying valuable log
information.
This forces another initdb since yesterday :-(. Need to get that log
reset utility done...
* Store two past checkpoint locations, not just one, in pg_control.
On startup, we fall back to the older checkpoint if the newer one
is unreadable. Also, a physical copy of the newest checkpoint record
is kept in pg_control for possible use in disaster recovery (ie,
complete loss of pg_xlog). Also add a version number for pg_control
itself. Remove archdir from pg_control; it ought to be a GUC
parameter, not a special case (not that it's implemented yet anyway).
* Suppress successive checkpoint records when nothing has been entered
in the WAL log since the last one. This is not so much to avoid I/O
as to make it actually useful to keep track of the last two
checkpoints. If the things are right next to each other then there's
not a lot of redundancy gained...
* Change CRC scheme to a true 64-bit CRC, not a pair of 32-bit CRCs
on alternate bytes. Polynomial borrowed from ECMA DLT1 standard.
* Fix XLOG record length handling so that it will work at BLCKSZ = 32k.
* Change XID allocation to work more like OID allocation. (This is of
dubious necessity, but I think it's a good idea anyway.)
* Fix a number of minor bugs, such as off-by-one logic for XLOG file
wraparound at the 4 gig mark.
* Add documentation and clean up some coding infelicities; move file
format declarations out to include files where planned contrib
utilities can get at them.
* Checkpoint will now occur every CHECKPOINT_SEGMENTS log segments or
every CHECKPOINT_TIMEOUT seconds, whichever comes first. It is also
possible to force a checkpoint by sending SIGUSR1 to the postmaster
(undocumented feature...)
* Defend against kill -9 postmaster by storing shmem block's key and ID
in postmaster.pid lockfile, and checking at startup to ensure that no
processes are still connected to old shmem block (if it still exists).
* Switch backends to accept SIGQUIT rather than SIGUSR1 for emergency
stop, for symmetry with postmaster and xlog utilities. Clean up signal
handling in bootstrap.c so that xlog utilities launched by postmaster
will react to signals better.
* Standalone bootstrap now grabs lockfile in target directory, as added
insurance against running it in parallel with live postmaster.
when user does another FETCH after reaching end of data, or another
FETCH backwards after reaching start. This is needed because some plan
nodes are not very robust about being called again after they've already
returned NULL; for example, MergeJoin will crash in some states but not
others. While the ideal approach would be for them all to handle this
correctly, it seems foolish to assume that no such bugs would creep in
again once cleaned up. Therefore, the most robust answer is to prevent
the situation from arising at all.
noncachable, so that CURRENT_DATE and CURRENT_TIME work as functions
again, rather than being collapsed to constants immediately. Marking the
reverse conversions noncachable might be overkill, but I'm not sure;
do these datatypes have the notion of a CURRENT value? Better safe than
sorry, for now.
only if at least N other backends currently have open transactions. This
is not a great deal of intelligence about whether a delay might be
profitable ... but it beats no intelligence at all. Note that the default
COMMIT_DELAY is still zero --- this new code does nothing unless that
setting is changed.
Also, mark ENABLEFSYNC as a system-wide setting. It's no longer safe to
allow that to be set per-backend, since we may be relying on some other
backend's fsync to have synced the WAL log.
> Is there one LOCKMETHODCTL for every backend? I thought there was only
> one of them.
>>
>> You're right, that line is erroneous; it should read
>>
>> size += MAX_LOCK_METHODS * MAXALIGN(sizeof(LOCKMETHODCTL));
>>
>> Not a significant error but it should be changed for clarity ...
be lurking in the install target directory. But don't zap up-to-date
headers (so install-all-headers before regular install will work).
Per suggestion from Larry Rosenman.
use the ANSI varargs style (<stdarg.h>) not the old style. Tatsuo had
reported this change was necessary back in the 7.0 beta cycle (4/13/00)
but for some reason, making the edit never got done.
waste of cycles on single-CPU machines, and of dubious utility on multi-CPU
machines too.
Tweak s_lock_stuck so that caller can specify timeout interval, and
increase interval before declaring stuck spinlock for buffer locks and XLOG
locks.
On systems that have fdatasync(), use that rather than fsync() to sync WAL
log writes. Ensure that WAL file is entirely allocated during XLogFileInit.
1. If there is exactly one pg_operator entry of the right name and oprkind,
oper() and related routines would return that entry whether its input type
had anything to do with the request or not. This is just premature
optimization: we shouldn't return the single candidate until after we verify
that it really is a valid candidate, ie, is at least coercion-compatible
with the given types.
2. oper() and related routines only promise a coercion-compatible result.
Unfortunately, there were quite a few callers that assumed the returned
operator is binary-compatible with the given datatype; they would proceed
to call it without making any datatype coercions. These callers include
sorting, grouping, aggregation, and VACUUM ANALYZE. In general I think
it is appropriate for these callers to require an exact or binary-compatible
match, so I've added a new routine compatible_oper() that only succeeds if
it can find an operator that doesn't require any run-time conversions.
Callers now call oper() or compatible_oper() depending on whether they are
prepared to deal with type conversion or not.
The upshot of these bugs is revealed by the following silliness in PL/Tcl's
selftest: it creates an operator @< on int4, and then tries to use it to
sort a char(N) column. The system would let it do that :-( (and evidently
has done so since 6.3 :-( :-(). The result in this case was just a silly
sort order, but the reverse combination would've provoked coredump from
trying to dereference integers. With this fix you get more reasonable
behavior:
pltcl_test=# select * from T_pkey1 order by key1, key2 using @<;
ERROR: Unable to identify an operator '@<' for types 'bpchar' and 'bpchar'
You will have to retype this query using an explicit cast
compressed storage works perfectly well. Might as well have a coherent
strategy for applying it, rather than the haphazard store-what-you-get
approach that was in the code before. The strategy I've set up here is
to attempt compression of any compressible index value exceeding
BLCKSZ/16, or about 500 bytes by default.
clause with an alias is a <subquery> and therefore hides table references
appearing within it, according to the spec. This is the same as the
preliminary patch I posted to pgsql-patches yesterday, plus some really
grotty code in ruleutils.c to reverse-list a query tree with the correct
alias name depending on context. I'd rather not have done that, but unless
we want to force another initdb for 7.1, there's no other way for now.
as previously discussed.
It makes AIX and IRIX not use DST for dates before 1970.
The following expected files need to be removed from the regression tests,
they contain wrong results and are not needed any more.
src/test/regress/expected/horology-1947-PDT.out
src/test/regress/expected/tinterval-1947-PDT.out
src/test/regress/expected/abstime-1947-PDT.out
Zeugswetter Andreas
definitions from K&R to ANSI C style, and fix broken assumption that
int and long are the same datatype. This repairs problems observed
on Alpha with regexps having between 32 and 63 states.
two transactions create the same table name concurrently, the one that
fails will complain about unique index pg_class_relname_index, rather than
about pg_type_typname_index which'll confuse most people. Free side
benefit: pg_class.reltype is correctly linked to the pg_type entry now.
It's been zero in all but the preloaded pg_class entries since who knows
when.
are now separate files "postgres.h" and "postgres_fe.h", which are meant
to be the primary include files for backend .c files and frontend .c files
respectively. By default, only include files meant for frontend use are
installed into the installation include directory. There is a new make
target 'make install-all-headers' that adds the whole content of the
src/include tree to the installed fileset, for use by people who want to
develop server-side code without keeping the complete source tree on hand.
Cleaned up a whole lot of crufty and inconsistent header inclusions.
elog(ERROR) not an Assert trap, since we've downgraded out-of-memory to
elog(ERROR) not a fatal error. Also, change the hard boundary from 256Mb
to 1Gb, just so that anyone who's actually got that much memory to spare
can play with TOAST objects approaching a gigabyte.
allocated by plan nodes are not leaked at end of query. This doesn't
really matter for normal queries, but it sure does for queries invoked
repetitively inside SQL functions. Clean up some other grotty code
associated with tupdescs, and fix a few other memory leaks exposed by
tests with simple SQL functions.
and two 'win32.mak'. Addresses the following:
1) Oops. Spelled fcntl.h wrong in the last one. D'uh.
2) PG_VERSION changed to be defined with " around it. psql/command.c failed
to compile without that.
3) Changed makefiles to use "/MD" and link both psql and libpq.dll against
MSVCRT.DLL instead of a static library. This takes care of the
crash-upon-free in psql.
I *think* this is what is on the "Open 7.1 Items" list as "Magnus Hagander
ODBC Issues?". It has nothing to do with ODBC, but it's the only issue I've
been involved with...
Magnus Hagander
actually) to ensure that its file access time doesn't get old enough to
tempt a /tmp directory cleaner to remove it. Still another reason we
should never have put the sockets in /tmp in the first place ...
and psql) again. Changes are:
1) psql requires the includes of "io.h" and "fcntl.h" in command.c in order
to make a call to open() work (io.h for _open(), fcntl.h for the O_xxx)
2) PG_VERSION is no longer defined in version.h[.in], but in configure.in.
Since we don't do configure on native win32, we need to put it in
config.h.win32 :-(
3) Added define of SYSCONFDIR to config.h.win32 - libpq won't compile
without it. This functionality is *NOT* tested - it's just defined as "" for
now. May work, may not.
4) DEF_PGPORT renamed to DEF_PGPORT_STR
I have done the "basic tests" on it - it connects to a database, and I can
run queries. Haven't tested any of the fancier functions (yet).
However, I stepped on a much bigger problem when fixing psql to work. It no
longer works when linked against the .DLL version of libpq (which the
Makefile does for it). I have left it linked against this version anyway,
pending the comments I get on this mail :-)
The problem is that there are strings being allocated from libpq.dll using
PQExpBuffers (for example, initPQExpBuffer() on line 92 of input.c). These
are being allocated using the malloc function used by libpq.dll. This
function *may* be different from the malloc function used by psql.exe - only
the resulting pointer must be valid. And with the default linking methods,
it *WILL* be different. Later, psql.exe tries to free() this string, at
which point it crashes because the free() function can't find the allocated
block (it's on the allocated blocks list used by the runtime lib of
libpq.dll).
Shouldn't the right thing to do be to have psql call termPQExpBuffer() on
the data instead? As it is now, gets_fromFile() will just return the pointer
received from the PQExpBuffer.data (this may well be present at several
places - this is the one I was bitten by so far). Isn't that kind of
"accessing the internals of the PQExpBuffer structure" wrong? Instead,
perhaps it shuold make a copy of the string, adn then termPQExpBuffer() it?
In that case, the string will have been allocated from within the same
library as the free() is called.
I can get it to work just fine by doing this - changing from (around line
100 of input.c):
and the same a bit further down in the same function.
But, as I said above, this may be at more places in the code? Perhaps
someone more familiar to it could comment on that?
What do you think shuld be done about this? Personally, I go by the "If you
allocate a piece of memory using an interface, use the same interface to
free it", but the question is how to make it work :-)
Also, AFAIK this only affects psql.exe, so the changes made to the libpq
this patch are required no matter how the other issue is handled.
Regards,
Magnus
bothering to check the return value --- which meant that in case the
update or delete failed because of a concurrent update, you'd not find
out about it, except by observing later that the transaction produced
the wrong outcome. There are now subroutines simple_heap_update and
simple_heap_delete that should be used anyplace that you're not prepared
to do the full nine yards of coping with concurrent updates. In
practice, that seems to mean absolutely everywhere but the executor,
because *noplace* else was checking.
eliminates a raft of portability issues, including whether sys_nerr
exists, whether the platform has any valid negative errnos, etc. The
downside is minimal: errno shouldn't ever contain an invalid value anyway,
and if it does, reasonably modern versions of strerror will not choke.
This rangecheck idea seemed good at the time, but it's clearly a net loss,
and I apologize to all concerned for having ever put it in.
rewrite of deadlock checking. Lock holder objects are now reachable from
the associated LOCK as well as from the owning PROC. This makes it
practical to find all the processes holding a lock, as well as all those
waiting on the lock. Also, clean up some of the grottier aspects of the
SHMQueue API, and cause the waitProcs list to be stored in the intuitive
direction instead of the nonintuitive one. (Bet you didn't know that
the code followed the 'prev' link to get to the next waiting process,
instead of the 'next' link. It doesn't do that anymore.)
of c.h altogether, and putting it into the only places that use it
(elog.c and exc.c), instead. Modify these routines to check for a
NULL or empty-string return from strerror, too, since some platforms
define strerror to return empty string for unknown errors (what a useless
definition that is ...). Clean up some cruft in ExcPrint while at it.
whitespace is unimportant in assembly code. Also, move VAX definition
of typedef slock_t to port header files to be like all the other ports.
Note that netbsd.h and openbsd.h are now identical, and I rather think
that freebsd.h is broken in the places where it doesn't agree --- but
I'll leave it to the freebsders to look at that.
* doc/FAQ_MSWIN: Update to be consistent with software -- mainly change
comment from lack of Cygwin UNIX domain socket support and to list of
current Cygwin UNIX domain socket issues.
* src/include/config.h.in: Enable UNIX domain sockets for Cygwin.
* src/include/port/win.h: Disable UNIX domain sockets for Cygwin b20.1.
* src/test/regress/pg_regress.sh: Use UNIX domain sockets for Cygwin
instead of TCP/IP.
mixed-signs. Previous effort left way too many minus signs, and was at
least as broken as the one before that :(
Clean up "ISO-style" time interval representation to omit zero fields if
there is at least one non-zero field. Supress some leading plus signs
when not necessary for clarity.
Replace every #ifdef __CYGWIN__ block with a cleaner TIMEZONE_GLOBAL macro
defined in datetime.h.
GetRawDatabaseInfo() won't cope with a compressed path spec (much less
a moved-off one). I'm not going to force an initdb for this change,
because it's noncritical --- we're not actually using datpath at all
right now. But it seems a good idea to apply the fix while I'm thinking
about it.
are treated more like 'cancel' interrupts: the signal handler sets a
flag that is examined at well-defined spots, rather than trying to cope
with an interrupt that might happen anywhere. See pghackers discussion
of 1/12/01.
are now critical sections, so as to ensure die() won't interrupt us while
we are munging shared-memory data structures. Avoid insecure intermediate
states in some code that proc_exit will call, like palloc/pfree. Rename
START/END_CRIT_CODE to START/END_CRIT_SECTION, since that seems to be
what people tend to call them anyway, and make them be called with () like
a function call, in hopes of not confusing pg_indent.
I doubt that this is sufficient to make SIGTERM safe anywhere; there's
just too much code that could get invoked during proc_exit().
entry:
----------------------------
revision 1.2
date: 2000/12/04 01:20:38; author: tgl; state: Exp; lines:
+18 -18
Eliminate some of the more blatant platform-dependencies ... it
builds here now, anyway ...
----------------------------
Which basically changes u_int*_t -> uint*_t, so now it does not
compile neither under Debian 2.2 nor under NetBSD 1.5 which
is platform independent<B8> all right. Also it replaces $KAME$
with $Id$ which is Bad Thing. PostgreSQL Id should be added as a
separate line so the file history could be seen.
So here is patch:
* changes uint*_t -> uint*. I guess that was the original
intention
* adds uint64 type to include/c.h because its needed
[somebody should check if I did it right]
* adds back KAME Id, because KAME is the master repository
* removes stupid c++ comments in pgcrypto.c
* removes <sys/types.h> from the code, its not needed
--
marko
Marko Kreen
