The patch needs test cases, reorganization, and cfbot testing.
Technically reverts commits 5c31afc49d..e35b2bad1a (exclusive/inclusive)
and 08db7c63f3..ccbe34139b.
Reported-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/E1ktAAG-0002V2-VB@gemulon.postgresql.org
This adds a key management system that stores (currently) two data
encryption keys of length 128, 192, or 256 bits. The data keys are
AES256 encrypted using a key encryption key, and validated via GCM
cipher mode. A command to obtain the key encryption key must be
specified at initdb time, and will be run at every database server
start. New parameters allow a file descriptor open to the terminal to
be passed. pg_upgrade support has also been added.
Discussion: https://postgr.es/m/CA+fd4k7q5o6Nc_AaX6BcYM9yqTbC6_pnH-6nSD=54Zp6NBQTCQ@mail.gmail.com
Discussion: https://postgr.es/m/20201202213814.GG20285@momjian.us
Author: Masahiko Sawada, me, Stephen Frost
This GUC was always intended as a temporary solution to help with
finding 9.4-to-9.5 migration issues. Now that all pre-9.5 branches
are out of support, and 9.5 will be too before v14 is released,
it seems like it's okay to drop it. Doing so allows removal of
several hundred lines of poorly-tested code in parse_expr.c,
which have been a fertile source of bugs when people did use this.
Discussion: https://postgr.es/m/2234320.1607117945@sss.pgh.pa.us
This commit changes restore_command from PGC_POSTMASTER to PGC_SIGHUP.
As the side effect of this commit, restore_command can be reset to
empty during archive recovery. In this setting, archive recovery
tries to replay only WAL files available in pg_wal directory. This is
the same behavior as when the command that always fails is specified
in restore_command.
Note that restore_command still must be specified (not empty) when
starting archive recovery, even after applying this commit. This is
necessary as the safeguard to prevent users from forgetting to
specify restore_command and starting archive recovery.
Thanks to Peter Eisentraut, Michael Paquier, Andres Freund,
Robert Haas and Anastasia Lubennikova for discussion.
Author: Sergei Kornilov
Reviewed-by: Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/2317771549527294@sas2-985f744271ca.qloud-c.yandex.net
This is a variant of the normal Unix-domain sockets that don't use the
file system but a separate "abstract" namespace. At the user
interface, such sockets are represented by names starting with "@".
Supported on Linux and Windows right now.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/6dee8574-b0ad-fc49-9c8c-2edc796f0033@2ndquadrant.com
Previously some index items have " ," (i.e., space + comma) in the docs
as follows. Since the space character before the comma is unnecessary,
this commit gets rid of that for the sake of consistency with other
index items.
parallel_leader_participation configuration parameter , Other Planner Options
Author: Fujii Masao
Reviewed-by: Euler Taveira
Discussion: https://postgr.es/m/e87b4ddf-1498-2850-bf55-519df3928fd4@oss.nttdata.com
- Misc grammar and punctuation fixes.
- Stylistic cleanup: use spaces between function arguments and JSON fields
in examples. For example "foo(a,b)" -> "foo(a, b)". Add semicolon after
last END in a few PL/pgSQL examples that were missing them.
- Make sentence that talked about "..." and ".." operators more clear,
by avoiding to end the sentence with "..". That makes it look the same
as "..."
- Fix syntax description for HAVING: HAVING conditions cannot be repeated
Patch by Justin Pryzby, per Yaroslav Schekin's report. Backpatch to all
supported versions, to the extent that the patch applies easily.
Discussion: https://www.postgresql.org/message-id/20201005191922.GE17626%40telsasoft.com
Commit a97e85f2b caused "exceed the available area" warnings in PDF
builds. Fine-tune colwidth values to avoid that.
Back-patch to 9.6, like the prior patch. (This is of dubious value
before v13, since we were far from free of such warnings in older
branches. But we might as well keep the SGML looking the same in all
branches.)
Per buildfarm.
SQL commands are generally marked up as <command>, except when a link
to a reference page is used using <xref>. But the latter doesn't
create monospace markup, so this looks strange especially when a
paragraph contains a mix of links and non-links.
We considered putting <command> in the <refentrytitle> on the target
side, but that creates some formatting side effects elsewhere.
Generally, it seems safer to solve this on the link source side.
We can't put the <xref> inside the <command>; the DTD doesn't allow
this. DocBook 5 would allow the <command> to have the linkend
attribute itself, but we are not there yet.
So to solve this for now, convert the <xref>s to <link> plus
<command>. This gives the correct look and also gives some more
flexibility what we can put into the link text (e.g., subcommands or
other clauses). In the future, these could then be converted to
DocBook 5 style.
I haven't converted absolutely all xrefs to SQL command reference
pages, only those where we care about the appearance of the link text
or where it was otherwise appropriate to make the appearance match a
bit better. Also in some cases, the links where repetitive, so in
those cases the links where just removed and replaced by a plain
<command>. In cases where we just want the link and don't
specifically care about the generated link text (typically phrased
"for further information see <xref ...>") the xref is kept.
Reported-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Discussion: https://www.postgresql.org/message-id/flat/87o8pco34z.fsf@wibble.ilmari.org
For some reason, the id of the description of
max_parallel_maintenance_workers has been
guc-max-parallel-workers-maintenance since the beginning. Flip that
around to make it consistent.
This is useful for monitoring purposes with log parsing. Similarly to
pg_stat_activity, the leader's PID is shown only for active parallel
workers, minimizing the log footprint for the leaders as the equivalent
shared memory field is set as long as a backend is alive.
Author: Justin Pryzby
Reviewed-by: Álvaro Herrera, Michael Paquier, Julien Rouhaud, Tom Lane
Discussion: https://postgr.es/m/20200315111831.GA21492@telsasoft.com
Create an optional region in the main shared memory segment that can be
used to acquire and release "fast" DSM segments, and can benefit from
huge pages allocated at cluster startup time, if configured. Fall back
to the existing mechanisms when that space is full. The size is
controlled by a new GUC min_dynamic_shared_memory, defaulting to 0.
Main region DSM segments initially contain whatever garbage the memory
held last time they were used, rather than zeroes. That change revealed
that DSA areas failed to initialize themselves correctly in memory that
wasn't zeroed first, so fix that problem.
Discussion: https://postgr.es/m/CA%2BhUKGLAE2QBv-WgGp%2BD9P_J-%3Dyne3zof9nfMaqq1h3EGHFXYQ%40mail.gmail.com
Add a GUC that acts as a multiplier on work_mem. It gets applied when
sizing executor node hash tables that were previously size constrained
using work_mem alone.
The new GUC can be used to preferentially give hash-based nodes more
memory than the generic work_mem limit. It is intended to enable admin
tuning of the executor's memory usage. Overall system throughput and
system responsiveness can be improved by giving hash-based executor
nodes more memory (especially over sort-based alternatives, which are
often much less sensitive to being memory constrained).
The default value for hash_mem_multiplier is 1.0, which is also the
minimum valid value. This means that hash-based nodes continue to apply
work_mem in the traditional way by default.
hash_mem_multiplier is generally useful. However, it is being added now
due to concerns about hash aggregate performance stability for users
that upgrade to Postgres 13 (which added disk-based hash aggregation in
commit 1f39bce0). While the old hash aggregate behavior risked
out-of-memory errors, it is nevertheless likely that many users actually
benefited. Hash agg's previous indifference to work_mem during query
execution was not just faster; it also accidentally made aggregation
resilient to grouping estimate problems (at least in cases where this
didn't create destabilizing memory pressure).
hash_mem_multiplier can provide a certain kind of continuity with the
behavior of Postgres 12 hash aggregates in cases where the planner
incorrectly estimates that all groups (plus related allocations) will
fit in work_mem/hash_mem. This seems necessary because hash-based
aggregation is usually much slower when only a small fraction of all
groups can fit. Even when it isn't possible to totally avoid hash
aggregates that spill, giving hash aggregation more memory will reliably
improve performance (the same cannot be said for external sort
operations, which appear to be almost unaffected by memory availability
provided it's at least possible to get a single merge pass).
The PostgreSQL 13 release notes should advise users that increasing
hash_mem_multiplier can help with performance regressions associated
with hash aggregation. That can be taken care of by a later commit.
Author: Peter Geoghegan
Reviewed-By: Álvaro Herrera, Jeff Davis
Discussion: https://postgr.es/m/20200625203629.7m6yvut7eqblgmfo@alap3.anarazel.de
Discussion: https://postgr.es/m/CAH2-WzmD%2Bi1pG6rc1%2BCjc4V6EaFJ_qSuKCCHVnH%3DoruqD-zqow%40mail.gmail.com
Backpatch: 13-, where disk-based hash aggregation was introduced.
Note: This GUC was originally named enable_hashagg_disk when it appeared
in commit 1f39bce0, which added disk-based hash aggregation. It was
subsequently renamed in commit 92c58fd9.
Author: Peter Geoghegan
Reviewed-By: Jeff Davis, Álvaro Herrera
Discussion: https://postgr.es/m/9d9d1e1252a52ea1bad84ea40dbebfd54e672a0f.camel%40j-davis.com
Backpatch: 13-, where disk-based hash aggregation was introduced.
TLS 1.3 uses a different way of specifying ciphers and a different
OpenSSL API. PostgreSQL currently does not support setting those
ciphers. For now, just document this. In the future, support for
this might be added somehow.
Reviewed-by: Jonathan S. Katz <jkatz@postgresql.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
max_slot_wal_keep_size that was added in v13 and wal_keep_segments are
the GUC parameters to specify how much WAL files to retain for
the standby servers. While max_slot_wal_keep_size accepts the number of
bytes of WAL files, wal_keep_segments accepts the number of WAL files.
This difference of setting units between those similar parameters could
be confusing to users.
To alleviate this situation, this commit renames wal_keep_segments to
wal_keep_size, and make users specify the WAL size in it instead of
the number of WAL files.
There was also the idea to rename max_slot_wal_keep_size to
max_slot_wal_keep_segments, in the discussion. But we have been moving
away from measuring in segments, for example, checkpoint_segments was
replaced by max_wal_size. So we concluded to rename wal_keep_segments
to wal_keep_size.
Back-patch to v13 where max_slot_wal_keep_size was added.
Author: Fujii Masao
Reviewed-by: Álvaro Herrera, Kyotaro Horiguchi, David Steele
Discussion: https://postgr.es/m/574b4ea3-e0f9-b175-ead2-ebea7faea855@oss.nttdata.com
Eliminate enable_groupingsets_hash_disk, which was primarily useful
for testing grouping sets that use HashAgg and spill. Instead, hack
the table stats to convince the planner to choose hashed aggregation
for grouping sets that will spill to disk. Suggested by Melanie
Plageman.
Rename enable_hashagg_disk to hashagg_avoid_disk_plan, and invert the
meaning of on/off. The new name indicates more strongly that it only
affects the planner. Also, the word "avoid" is less definite, which
should avoid surprises when HashAgg still needs to use the
disk. Change suggested by Justin Pryzby, though I chose a different
GUC name.
Discussion: https://postgr.es/m/CAAKRu_aisiENMsPM2gC4oUY1hHG3yrCwY-fXUg22C6_MJUwQdA%40mail.gmail.com
Discussion: https://postgr.es/m/20200610021544.GA14879@telsasoft.com
Backpatch-through: 13
The group of wal_init_zero and wal_recycle is WAL_SETTINGS in guc.c,
but previously their documents were located in
"Replication"/"Sending Servers" section. This commit moves them to
the proper section "Write Ahead Log"/"Settings".
Back-patch to v12 where wal_init_zero and wal_recycle parameters
were introduced.
Author: Fujii Masao
Discussion: https://postgr.es/m/b5190ab4-a169-6a42-0e49-aed0807c8976@oss.nttdata.com
This commit updates the "Viewing Statistics" section more like
the existing catalogs chapter.
- Change its layout so that an introductory paragrap is put above
the table for each statistics view. Previously the explanations
were below the tables.
- Separate each view to different section and add index terms for them.
Author: Fujii Masao
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/6f8a482c-b3fa-4ed9-21c3-6d222a2cb87d@oss.nttdata.com
Use xreflabel attributes instead of endterm attributes to control the
appearance of links to subsections of SQL command reference pages.
This is simpler, it matches what we do elsewhere (e.g. for GUC variables),
and it doesn't draw "Unresolved ID reference" warnings from the PDF
toolchain.
Fix some places where the text was absolutely dependent on an <xref>
rendering exactly so, by using a <link> around the required text
instead. At least one of those spots had already been turned into
bad grammar by subsequent changes, and the whole idea is just too
fragile for my taste. <xref> does NOT have fixed output, don't write
as if it does.
Consistently include a page-level link in cross-man-page references,
because otherwise they are useless/nonsensical in man-page output.
Likewise, be consistent about mentioning "below" or "above" in same-page
references; we were doing that in about 90% of the cases, but now it's
100%.
Also get rid of another nonfunctional-in-PDF idea, of making
cross-references to functions by sticking ID tags on <row> constructs.
We can put the IDs on <indexterm>s instead --- which is probably not any
more sensible in abstract terms, but it works where the other doesn't.
(There is talk of attaching cross-reference IDs to most or all of
the docs' function descriptions, but for now I just fixed the two
that exist.)
Discussion: https://postgr.es/m/14480.1589154358@sss.pgh.pa.us
I concluded that we really just ought to force all tables in PDF output
to default to "left" alignment (instead of "justify"); that is what the
HTML toolchain does and that's what most people have been designing the
tables to look good with. There are few if any places where "justify"
produces better-looking output, and there are many where it looks
horrible. So change stylesheet-fo.xsl to make that true.
Also tweak column widths in a few more tables to make them look better
and avoid "exceed the available area" warnings. This commit fixes
basically everything that can be fixed through that approach. The
remaining tables that give warnings either are scheduled for redesign
as per recent discussions, or need a fundamental rethink because they
Just Don't Work in a narrow view.
Moving this setting into the main configuration file was ill-considered,
perhaps, because that typically causes it to be set before
timezone_abbreviations has been set. Which in turn means that zone
abbreviations don't work, only full zone names.
We could imagine hacking things so that such cases do work, but the
stability of the hack would be questionable, and the value isn't really
that high. Instead just document that you should use a numeric zone
offset or a full zone name.
Per bug #16404 from Reijo Suhonen.
Back-patch to v12 where this was changed.
Discussion: https://postgr.es/m/16404-4603a99603fbd04c@postgresql.org
Previously in the "Standby Server Operation" section, pg_ctl promote and
protmote_trigger_file were documented as a method to trigger standby
promotion, but pg_promote() function not.
This commit also adds parentheses into <function>pg_promote</function>
in some docs to make it clearer that a function is being referred to.
Author: Masahiro Ikeda
Reviewed-by: Michael Paquier, Laurenz Albe, Tom Lane, Fujii Masao
Discussion: https://postgr.es/m/de0068417a9f4046bac693cbcc00bdc9@oss.nttdata.com
Previously, the partitionwise join technique only allowed partitionwise
join when input partitioned tables had exactly the same partition
bounds. This commit extends the technique to some cases when the tables
have different partition bounds, by using an advanced partition-matching
algorithm introduced by this commit. For both the input partitioned
tables, the algorithm checks whether every partition of one input
partitioned table only matches one partition of the other input
partitioned table at most, and vice versa. In such a case the join
between the tables can be broken down into joins between the matching
partitions, so the algorithm produces the pairs of the matching
partitions, plus the partition bounds for the join relation, to allow
partitionwise join for computing the join. Currently, the algorithm
works for list-partitioned and range-partitioned tables, but not
hash-partitioned tables. See comments in partition_bounds_merge().
Ashutosh Bapat and Etsuro Fujita, most of regression tests by Rajkumar
Raghuwanshi, some of the tests by Mark Dilger and Amul Sul, reviewed by
Dmitry Dolgov and Amul Sul, with additional review at various points by
Ashutosh Bapat, Mark Dilger, Robert Haas, Antonin Houska, Amit Langote,
Justin Pryzby, and Tomas Vondra
Discussion: https://postgr.es/m/CAFjFpRdjQvaUEV5DJX3TW6pU5eq54NCkadtxHX2JiJG_GvbrCA@mail.gmail.com
Replication slots are useful to retain data that may be needed by a
replication system. But experience has shown that allowing them to
retain excessive data can lead to the primary failing because of running
out of space. This new feature allows the user to configure a maximum
amount of space to be reserved using the new option
max_slot_wal_keep_size. Slots that overrun that space are invalidated
at checkpoint time, enabling the storage to be released.
Author: Kyotaro HORIGUCHI <horiguchi.kyotaro@lab.ntt.co.jp>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20170228.122736.123383594.horiguchi.kyotaro@lab.ntt.co.jp
Incremental Sort is an optimized variant of multikey sort for cases when
the input is already sorted by a prefix of the requested sort keys. For
example when the relation is already sorted by (key1, key2) and we need
to sort it by (key1, key2, key3) we can simply split the input rows into
groups having equal values in (key1, key2), and only sort/compare the
remaining column key3.
This has a number of benefits:
- Reduced memory consumption, because only a single group (determined by
values in the sorted prefix) needs to be kept in memory. This may also
eliminate the need to spill to disk.
- Lower startup cost, because Incremental Sort produce results after each
prefix group, which is beneficial for plans where startup cost matters
(like for example queries with LIMIT clause).
We consider both Sort and Incremental Sort, and decide based on costing.
The implemented algorithm operates in two different modes:
- Fetching a minimum number of tuples without check of equality on the
prefix keys, and sorting on all columns when safe.
- Fetching all tuples for a single prefix group and then sorting by
comparing only the remaining (non-prefix) keys.
We always start in the first mode, and employ a heuristic to switch into
the second mode if we believe it's beneficial - the goal is to minimize
the number of unnecessary comparions while keeping memory consumption
below work_mem.
This is a very old patch series. The idea was originally proposed by
Alexander Korotkov back in 2013, and then revived in 2017. In 2018 the
patch was taken over by James Coleman, who wrote and rewrote most of the
current code.
There were many reviewers/contributors since 2013 - I've done my best to
pick the most active ones, and listed them in this commit message.
Author: James Coleman, Alexander Korotkov
Reviewed-by: Tomas Vondra, Andreas Karlsson, Marti Raudsepp, Peter Geoghegan, Robert Haas, Thomas Munro, Antonin Houska, Andres Freund, Alexander Kuzmenkov
Discussion: https://postgr.es/m/CAPpHfdscOX5an71nHd8WSUH6GNOCf=V7wgDaTXdDd9=goN-gfA@mail.gmail.com
Discussion: https://postgr.es/m/CAPpHfds1waRZ=NOmueYq0sx1ZSCnt+5QJvizT8ndT2=etZEeAQ@mail.gmail.com
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Bump XLOG_PAGE_MAGIC, since this introduces XLOG_GIST_ASSIGN_LSN.
Future servers accept older WAL, so this bump is discretionary.
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
This patch replaces the boolean GUC log_parameters_on_error introduced
by commit ba79cb5dc with an integer log_parameter_max_length_on_error,
adding the ability to specify how many bytes to trim each logged
parameter value to. (The previous coding hard-wired that choice at
64 bytes.)
In addition, add a new parameter log_parameter_max_length that provides
similar control over truncation of query parameters that are logged in
response to statement-logging options, as opposed to errors. Previous
releases always logged such parameters in full, possibly causing log
bloat.
For backwards compatibility with prior releases,
log_parameter_max_length defaults to -1 (log in full), while
log_parameter_max_length_on_error defaults to 0 (no logging).
Per discussion, log_parameter_max_length is SUSET since the DBA should
control routine logging behavior, but log_parameter_max_length_on_error
is USERSET because it also affects errcontext data sent back to the
client.
Alexey Bashtanov, editorialized a little by me
Discussion: https://postgr.es/m/b10493cc-a399-a03a-67c7-068f2791ee50@imap.cc
Traditionally autovacuum has only ever invoked a worker based on the
estimated number of dead tuples in a table and for anti-wraparound
purposes. For the latter, with certain classes of tables such as
insert-only tables, anti-wraparound vacuums could be the first vacuum that
the table ever receives. This could often lead to autovacuum workers being
busy for extended periods of time due to having to potentially freeze
every page in the table. This could be particularly bad for very large
tables. New clusters, or recently pg_restored clusters could suffer even
more as many large tables may have the same relfrozenxid, which could
result in large numbers of tables requiring an anti-wraparound vacuum all
at once.
Here we aim to reduce the work required by anti-wraparound and aggressive
vacuums in general, by triggering autovacuum when the table has received
enough INSERTs. This is controlled by adding two new GUCs and reloptions;
autovacuum_vacuum_insert_threshold and
autovacuum_vacuum_insert_scale_factor. These work exactly the same as the
existing scale factor and threshold controls, only base themselves off the
number of inserts since the last vacuum, rather than the number of dead
tuples. New controls were added rather than reusing the existing
controls, to allow these new vacuums to be tuned independently and perhaps
even completely disabled altogether, which can be done by setting
autovacuum_vacuum_insert_threshold to -1.
We make no attempt to skip index cleanup operations on these vacuums as
they may trigger for an insert-mostly table which continually doesn't have
enough dead tuples to trigger an autovacuum for the purpose of removing
those dead tuples. If we were to skip cleaning the indexes in this case,
then it is possible for the index(es) to become bloated over time.
There are additional benefits to triggering autovacuums based on inserts,
as tables which never contain enough dead tuples to trigger an autovacuum
are now more likely to receive a vacuum, which can mark more of the table
as "allvisible" and encourage the query planner to make use of Index Only
Scans.
Currently, we still obey vacuum_freeze_min_age when triggering these new
autovacuums based on INSERTs. For large insert-only tables, it may be
beneficial to lower the table's autovacuum_freeze_min_age so that tuples
are eligible to be frozen sooner. Here we've opted not to zero that for
these types of vacuums, since the table may just be insert-mostly and we
may otherwise freeze tuples that are still destined to be updated or
removed in the near future.
There was some debate to what exactly the new scale factor and threshold
should default to. For now, these are set to 0.2 and 1000, respectively.
There may be some motivation to adjust these before the release.
Author: Laurenz Albe, Darafei Praliaskouski
Reviewed-by: Alvaro Herrera, Masahiko Sawada, Chris Travers, Andres Freund, Justin Pryzby
Discussion: https://postgr.es/m/CAC8Q8t%2Bj36G_bLF%3D%2B0iMo6jGNWnLnWb1tujXuJr-%2Bx8ZCCTqoQ%40mail.gmail.com
The parameters primary_conninfo, primary_slot_name and
wal_receiver_create_temp_slot can now be changed with a simple "reload"
signal, no longer requiring a server restart. This is achieved by
signalling the walreceiver process to terminate and having it start
again with the new values.
Thanks to Andres Freund, Kyotaro Horiguchi, Fujii Masao for discussion.
Author: Sergei Kornilov <sk@zsrv.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/19513901543181143@sas1-19a94364928d.qloud-c.yandex.net
Commit 3297308278 gave walreceiver the ability to create and use a
temporary replication slot, and made it controllable by a GUC (enabled
by default) that can be changed with SIGHUP. That's useful but has two
problems: one, it's possible to cause the origin server to fill its disk
if the slot doesn't advance in time; and also there's a disconnect
between state passed down via the startup process and GUCs that
walreceiver reads directly.
We handle the first problem by setting the option to disabled by
default. If the user enables it, its on their head to make sure that
disk doesn't fill up.
We handle the second problem by passing the flag via startup rather than
having walreceiver acquire it directly, and making it PGC_POSTMASTER
(which ensures a walreceiver always has the fresh value). A future
commit can relax this (to PGC_SIGHUP again) by having the startup
process signal walreceiver to shutdown whenever the value changes.
Author: Sergei Kornilov <sk@zsrv.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20200122055510.GH174860@paquier.xyz
Previously if a promotion was triggered while recovery was paused,
the paused state continued. Also recovery could be paused by executing
pg_wal_replay_pause() even while a promotion was ongoing. That is,
recovery pause had higher priority over a standby promotion.
But this behavior was not desirable because most users basically wanted
the recovery to complete as soon as possible and the server to become
the master when they requested a promotion.
This commit changes recovery so that it prefers a promotion over
recovery pause. That is, if a promotion is triggered while recovery
is paused, the paused state ends and a promotion continues. Also
this commit makes recovery pause functions like pg_wal_replay_pause()
throw an error if they are executed while a promotion is ongoing.
Internally, this commit adds new internal function PromoteIsTriggered()
that returns true if a promotion is triggered. Since the name of
this function and the existing function IsPromoteTriggered() are
confusingly similar, the commit changes the name of IsPromoteTriggered()
to IsPromoteSignaled, as more appropriate name.
Author: Fujii Masao
Reviewed-by: Atsushi Torikoshi, Sergei Kornilov
Discussion: https://postgr.es/m/00c194b2-dbbb-2e8a-5b39-13f14048ef0a@oss.nttdata.com
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Back-patch to 9.5 (all supported versions). This introduces a new WAL
record type, XLOG_GIST_ASSIGN_LSN, without bumping XLOG_PAGE_MAGIC. As
always, update standby systems before master systems. This changes
sizeof(RelationData) and sizeof(IndexStmt), breaking binary
compatibility for affected extensions. (The most recent commit to
affect the same class of extensions was
089e4d405d0f3b94c74a2c6a54357a84a681754b.)
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
While performing hash aggregation, track memory usage when adding new
groups to a hash table. If the memory usage exceeds work_mem, enter
"spill mode".
In spill mode, new groups are not created in the hash table(s), but
existing groups continue to be advanced if input tuples match. Tuples
that would cause a new group to be created are instead spilled to a
logical tape to be processed later.
The tuples are spilled in a partitioned fashion. When all tuples from
the outer plan are processed (either by advancing the group or
spilling the tuple), finalize and emit the groups from the hash
table. Then, create new batches of work from the spilled partitions,
and select one of the saved batches and process it (possibly spilling
recursively).
Author: Jeff Davis
Reviewed-by: Tomas Vondra, Adam Lee, Justin Pryzby, Taylor Vesely, Melanie Plageman
Discussion: https://postgr.es/m/507ac540ec7c20136364b5272acbcd4574aa76ef.camel@j-davis.com
Introduce a GUC and a tablespace option to control I/O prefetching, much
like effective_io_concurrency, but for work that is done on behalf of
many client sessions.
Use the new setting in heapam.c instead of the hard-coded formula
effective_io_concurrency + 10 introduced by commit 558a9165e0. Go with
a default value of 10 for now, because it's a round number pretty close
to the value used for that existing case.
Discussion: https://postgr.es/m/CA%2BhUKGJUw08dPs_3EUcdO6M90GnjofPYrWp4YSLaBkgYwS-AqA%40mail.gmail.com
The backend type, which corresponds to what
pg_stat_activity.backend_type shows, is added as a column to the
csvlog and can optionally be added to log_line_prefix using the new %b
placeholder.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Kuntal Ghosh <kuntalghosh.2007@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://www.postgresql.org/message-id/flat/c65e5196-4f04-4ead-9353-6088c19615a3@2ndquadrant.com
Fix up some imprecise comments and poor markup from ba79cb5dc. Also try
to convert the documentation of log_min_duration_sample and friends into
passable English.
Before, if a recovery target is configured, but the archive ended
before the target was reached, recovery would end and the server would
promote without further notice. That was deemed to be pretty wrong.
With this change, if the recovery target is not reached, it is a fatal
error.
Based-on-patch-by: Leif Gunnar Erlandsen <leif@lako.no>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/993736dd3f1713ec1f63fc3b653839f5@lako.no
Detection of WAL records having references to invalid pages
during recovery causes PostgreSQL to raise a PANIC-level error,
aborting the recovery. Setting ignore_invalid_pages to on causes
the system to ignore those WAL records (but still report a warning),
and continue recovery. This behavior may cause crashes, data loss,
propagate or hide corruption, or other serious problems.
However, it may allow you to get past the PANIC-level error,
to finish the recovery, and to cause the server to start up.
Author: Fujii Masao
Reviewed-by: Michael Paquier
Discussion: https://www.postgresql.org/message-id/CAHGQGwHCK6f77yeZD4MHOnN+PaTf6XiJfEB+Ce7SksSHjeAWtg@mail.gmail.com
This feature allows the vacuum to leverage multiple CPUs in order to
process indexes. This enables us to perform index vacuuming and index
cleanup with background workers. This adds a PARALLEL option to VACUUM
command where the user can specify the number of workers that can be used
to perform the command which is limited by the number of indexes on a
table. Specifying zero as a number of workers will disable parallelism.
This option can't be used with the FULL option.
Each index is processed by at most one vacuum process. Therefore parallel
vacuum can be used when the table has at least two indexes.
The parallel degree is either specified by the user or determined based on
the number of indexes that the table has, and further limited by
max_parallel_maintenance_workers. The index can participate in parallel
vacuum iff it's size is greater than min_parallel_index_scan_size.
Author: Masahiko Sawada and Amit Kapila
Reviewed-by: Dilip Kumar, Amit Kapila, Robert Haas, Tomas Vondra,
Mahendra Singh and Sergei Kornilov
Tested-by: Mahendra Singh and Prabhat Sahu
Discussion:
https://postgr.es/m/CAD21AoDTPMgzSkV4E3SFo1CH_x50bf5PqZFQf4jmqjk-C03BWg@mail.gmail.comhttps://postgr.es/m/CAA4eK1J-VoR9gzS5E75pcD-OH0mEyCdp8RihcwKrcuw7J-Q0+w@mail.gmail.com
If no permanent replication slot is configured using
primary_slot_name, the walreceiver now creates and uses a temporary
replication slot. A new setting wal_receiver_create_temp_slot can be
used to disable this behavior, for example, if the remote instance is
out of replication slots.
Reviewed-by: Masahiko Sawada <masahiko.sawada@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/CA%2Bfd4k4dM0iEPLxyVyme2RAFsn8SUgrNtBJOu81YqTY4V%2BnqZA%40mail.gmail.com
This makes such log entries more useful, since the cause of the error
can be dependent on the parameter values.
Author: Alexey Bashtanov, Álvaro Herrera
Discussion: https://postgr.es/m/0146a67b-a22a-0519-9082-bc29756b93a2@imap.cc
Reviewed-by: Peter Eisentraut, Andres Freund, Tom Lane
Change default of ssl_min_protocol_version to TLSv1.2 (from TLSv1,
which means 1.0). Older versions are still supported, just not by
default.
TLS 1.0 is widely deprecated, and TLS 1.1 only slightly less so. All
OpenSSL versions that support TLS 1.1 also support TLS 1.2, so there
would be very little reason to, say, set the default to TLS 1.1
instead on grounds of better compatibility.
The test suite overrides this new setting, so it can still run with
older OpenSSL versions.
Discussion: https://www.postgresql.org/message-id/flat/b327f8df-da98-054d-0cc5-b76a857cfed9%402ndquadrant.com
Make allow_system_table_mods settable at run time by superusers. It
was previously postmaster start only.
We don't want to make system catalog DDL wide-open, but there are
occasionally useful things to do like setting reloptions or statistics
on a busy system table, and blocking those doesn't help anyone. Also,
this enables the possibility of writing a test suite for this setting.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/8b00ea5e-28a7-88ba-e848-21528b632354%402ndquadrant.com
Instead of deciding to serialize a transaction merely based on the
number of changes in that xact (toplevel or subxact), this makes
the decisions based on amount of memory consumed by the changes.
The memory limit is defined by a new logical_decoding_work_mem GUC,
so for example we can do this
SET logical_decoding_work_mem = '128kB'
to reduce the memory usage of walsenders or set the higher value to
reduce disk writes. The minimum value is 64kB.
When adding a change to a transaction, we account for the size in
two places. Firstly, in the ReorderBuffer, which is then used to
decide if we reached the total memory limit. And secondly in the
transaction the change belongs to, so that we can pick the largest
transaction to evict (and serialize to disk).
We still use max_changes_in_memory when loading changes serialized
to disk. The trouble is we can't use the memory limit directly as
there might be multiple subxact serialized, we need to read all of
them but we don't know how many are there (and which subxact to
read first).
We do not serialize the ReorderBufferTXN entries, so if there is a
transaction with many subxacts, most memory may be in this type of
objects. Those records are not included in the memory accounting.
We also do not account for INTERNAL_TUPLECID changes, which are
kept in a separate list and not evicted from memory. Transactions
with many CTID changes may consume significant amounts of memory,
but we can't really do much about that.
The current eviction algorithm is very simple - the transaction is
picked merely by size, while it might be useful to also consider age
(LSN) of the changes for example. With the new Generational memory
allocator, evicting the oldest changes would make it more likely
the memory gets actually pfreed.
The logical_decoding_work_mem can be set in postgresql.conf, in which
case it serves as the default for all publishers on that instance.
Author: Tomas Vondra, with changes by Dilip Kumar and Amit Kapila
Reviewed-by: Dilip Kumar and Amit Kapila
Tested-By: Vignesh C
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
Add some support for automatically showing backtraces in certain error
situations in the server. Backtraces are shown on assertion failure;
also, a new setting backtrace_functions can be set to a list of C
function names, and all ereport()s and elog()s from the mentioned
functions will have backtraces generated. Finally, the function
errbacktrace() can be manually added to an ereport() call to generate a
backtrace for that call.
Authors: Peter Eisentraut, Álvaro Herrera
Discussion: https://postgr.es/m//5f48cb47-bf1e-05b6-7aae-3bf2cd01586d@2ndquadrant.com
Discussion: https://postgr.es/m/CAMsr+YGL+yfWE=JvbUbnpWtrRZNey7hJ07+zT4bYJdVp4Szdrg@mail.gmail.com
This allows logging a sample of statements, without incurring excessive
log traffic (which may impact performance). This can be useful when
analyzing workloads with lots of short queries.
The sampling is configured using two new GUC parameters:
* log_min_duration_sample - minimum required statement duration
* log_statement_sample_rate - sample rate (0.0 - 1.0)
Only statements with duration exceeding log_min_duration_sample are
considered for sampling. To enable sampling, both those GUCs have to
be set correctly.
The existing log_min_duration_statement GUC has a higher priority, i.e.
statements with duration exceeding log_min_duration_statement will be
always logged, irrespectedly of how the sampling is configured. This
means only configurations
log_min_duration_sample < log_min_duration_statement
do actually sample the statements, instead of logging everything.
Author: Adrien Nayrat
Reviewed-by: David Rowley, Vik Fearing, Tomas Vondra
Discussion: https://postgr.es/m/bbe0a1a8-a8f7-3be2-155a-888e661cc06c@anayrat.info
The docs do say which GUCs can be changed only by superusers, but we
forgot to mention this for the new log_transaction_sample_rate. This
GUC was introduced in PostgreSQL 12, so backpatch accordingly.
Author: Adrien Nayrat
Backpatch-through: 12
When we added the GUC units feature, we didn't make any great effort
to adjust the documentation of individual GUCs; they tended to still
say things like "this is the number of milliseconds that ...", even
though users might prefer to write some other units, and SHOW might
even show the value in other units. Commit 6c9fb69f2 made an effort
to improve this situation, but I thought it made things less readable
by injecting units information in mid-sentence. It also wasn't very
consistent, and did not touch all the GUCs that have units.
To improve matters, standardize on the phrasing "If this value is
specified without units, it is taken as <units>". Also, try to
standardize where this is mentioned, right before the specification
of the default. (In a couple of places, doing that would've required
more rewriting than seemed justified, so I wasn't 100% consistent
about that.) I also tried to use the phrases "amount of time",
"amount of memory", etc rather than describing the contents of GUCs
in other ways, as those were the majority usage in places that weren't
overcommitting to a particular unit. (I left "length of time" alone
in a couple of places, though.)
I failed to resist the temptation to copy-edit some awkward text, too.
Backpatch to v12, like 6c9fb69f2, mainly because v12 hasn't diverged
much from HEAD yet.
Discussion: https://postgr.es/m/15882.1571942223@sss.pgh.pa.us
Historically, we started the timer (if StatementTimeout > 0) at the
beginning of a simple-Query message and usually let it run until the
end, so that the timeout limit applied to the entire query string,
and intra-string changes of the statement_timeout GUC had no effect.
But, confusingly, a COMMIT within the string would reset the state
and allow a fresh timeout cycle to start with the current setting.
Commit f8e5f156b changed the behavior of statement_timeout for extended
query protocol, and as an apparently-unintended side effect, a change in
the statement_timeout GUC during a multi-statement simple-Query message
might have an effect immediately --- but only if it was going from
"disabled" to "enabled".
This is all pretty confusing, not to mention completely undocumented.
Let's change things so that the timeout is always reset between queries
of a multi-query string, whether they're transaction control commands
or not. Thus the active timeout setting is applied to each query in
the string, separately. This costs a few more cycles if statement_timeout
is active, but it provides much more intuitive behavior, especially if one
changes statement_timeout in one of the queries of the string.
Also, add something to the documentation to explain all this.
Per bug #16035 from Raj Mohite. Although this is a bug fix, I'm hesitant
to back-patch it; conceivably somebody has worked out the old behavior
and is depending on it. (But note that this change should make the
behavior less restrictive in most cases, since the timeout will now
be applied to shorter segments of code.)
Discussion: https://postgr.es/m/16035-456e6e69ebfd4374@postgresql.org
In v11 or before, this setting could not take effect in crash recovery
because it's specified in recovery.conf and crash recovery always
starts without recovery.conf. But commit 2dedf4d9a8 integrated
recovery.conf into postgresql.conf and which unexpectedly allowed
this setting to take effect even in crash recovery. This is definitely
not good behavior.
To fix the issue, this commit makes crash recovery always ignore
recovery_min_apply_delay setting.
Back-patch to v12 where the issue was added.
Author: Fujii Masao
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CAHGQGwEyD6HdZLfdWc+95g=VQFPR4zQL4n+yHxQgGEGjaSVheQ@mail.gmail.com
Discussion: https://postgr.es/m/e445616d-023e-a268-8aa1-67b8b335340c@pgmasters.net
Previously, our docs would say "Specifies the number of milliseconds"
but it wasn't clear that "milliseconds" was merely the default unit.
New text says "Specifies duration (defaults to milliseconds)", which is
clearer.
Reported-by: basil.bourque@gmail.com
Discussion: https://postgr.es/m/15912-2e35e9026f61230b@postgresql.org
Backpatch-through: 12
The behavior described in the PREPARE man page applies only for the
default plan_cache_mode setting, so explain that properly. Rewrite
some of the text while I'm here. Per suggestion from Bruce.
Discussion: https://postgr.es/m/20190930155505.GA21095@momjian.us
The documentation states that no target settings will be used when
standby.signal is present, but this is not quite the case since
recovery_target_timeline is a valid recovery target for a standby.
Update the documentation with this exception.
Author: David Steele <david@pgmasters.net>
Discussion: https://www.postgresql.org/message-id/flat/e445616d-023e-a268-8aa1-67b8b335340c%40pgmasters.net
Commit aa27977fe2 introduced this
restriction for pg_temp.function_name(arg); do likewise for types
created in temporary schemas. Programs that this breaks should add
"pg_temp." schema qualification or switch to arg::type_name syntax.
Back-patch to 9.4 (all supported versions).
Reviewed by Tom Lane. Reported by Tom Lane.
Security: CVE-2019-10208
This reverts commit 88bdbd3f74.
As committed, statement sampling used the existing duration threshold
(log_min_duration_statement) when decide which statements to sample.
The issue is that even the longest statements are subject to sampling,
and so may not end up logged. An improvement was proposed, introducing
a second duration threshold, but it would not be backwards compatible.
So we've decided to revert this feature - the separate threshold should
be part of the feature itself.
Discussion: https://postgr.es/m/CAFj8pRDS8tQ3Wviw9%3DAvODyUciPSrGeMhJi_WPE%2BEB8%2B4gLL-Q%40mail.gmail.com
The interaction of these parameters was a bit confused/confusing,
and in fact v11 entirely misses the opportunity to apply partition
constraints when a partition is accessed directly (rather than
indirectly from its parent).
In HEAD, establish the principle that enable_partition_pruning controls
partition pruning and nothing else. When accessing a partition via its
parent, we do partition pruning (if enabled by enable_partition_pruning)
and then there is no need to consider partition constraints in the
constraint_exclusion logic. When accessing a partition directly, its
partition constraints are applied by the constraint_exclusion logic,
only if constraint_exclusion = on.
In v11, we can't have such a clean division of these GUCs' effects,
partly because we don't want to break compatibility too much in a
released branch, and partly because the clean coding requires
inheritance_planner to have applied partition pruning to a partitioned
target table, which it doesn't in v11. However, we can tweak things
enough to cover the missed case, which seems like a good idea since
it's potentially a performance regression from v10. This patch keeps
v11's previous behavior in which enable_partition_pruning overrides
constraint_exclusion for an inherited target table, though.
In HEAD, also teach relation_excluded_by_constraints that it's okay to use
inheritable constraints when trying to prune a traditional inheritance
tree. This might not be thought worthy of effort given that that feature
is semi-deprecated now, but we have enough infrastructure that it only
takes a couple more lines of code to do it correctly.
Amit Langote and Tom Lane
Discussion: https://postgr.es/m/9813f079-f16b-61c8-9ab7-4363cab28d80@lab.ntt.co.jp
Discussion: https://postgr.es/m/29069.1555970894@sss.pgh.pa.us
This fixes a couple of grammar mistakes, typos and inconsistencies in
the documentation. Particularly, the configuration parsing allows only
"kB" to mean kilobyte but there were references in the docs to "KB".
Some instances of the latter are still in the code comments. Some
parameter values were mentioned with "Minus-one", and using directly
"-1" with proper markups is more helpful to the reader.
Some of these have been pointed out by Justin, and some others are
things I bumped into.
Author: Justin Pryzby, Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/20190330224333.GQ5815@telsasoft.com
Commit ca4103025d left a few loose ends. The most important one
(broken pg_dump output) is already fixed by virtue of commit
3b23552ad8, but some things remained:
* When ALTER TABLE rewrites tables, the indexes must remain in the
tablespace they were originally in. This didn't work because
index recreation during ALTER TABLE runs manufactured SQL (yuck),
which runs afoul of default_tablespace in competition with the parent
relation tablespace. To fix, reset default_tablespace to the empty
string temporarily, and add the TABLESPACE clause as appropriate.
* Setting a partitioned rel's tablespace to the database default is
confusing; if it worked, it would direct the partitions to that
tablespace regardless of default_tablespace. But in reality it does
not work, and making it work is a larger project. Therefore, throw
an error when this condition is detected, to alert the unwary.
Add some docs and tests, too.
Author: Álvaro Herrera
Discussion: https://postgr.es/m/CAKJS1f_1c260nOt_vBJ067AZ3JXptXVRohDVMLEBmudX1YEx-A@mail.gmail.com
Similarly to the set of parameters for keepalive, a connection parameter
for libpq is added as well as a backend GUC, called tcp_user_timeout.
Increasing the TCP user timeout is useful to allow a connection to
survive extended periods without end-to-end connection, and decreasing
it allows application to fail faster. By default, the parameter is 0,
which makes the connection use the system default, and follows a logic
close to the keepalive parameters in its handling. When connecting
through a Unix-socket domain, the parameters have no effect.
Author: Ryohei Nagaura
Reviewed-by: Fabien Coelho, Robert Haas, Kyotaro Horiguchi, Kirk
Jamison, Mikalai Keida, Takayuki Tsunakawa, Andrei Yahorau
Discussion: https://postgr.es/m/EDA4195584F5064680D8130B1CA91C45367328@G01JPEXMBYT04
This adds documentation about the user oriented parts of table access
methods (i.e. the default_table_access_method GUC and the USING clause
for CREATE TABLE etc), adds a basic chapter about the table access
method interface, and adds a note to storage.sgml that it's contents
don't necessarily apply for non-builtin AMs.
Author: Haribabu Kommi and Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
This is useful to obtain a view of the different transaction types in an
application, regardless of the durations of the statements each runs.
Author: Adrien Nayrat
Reviewed-by: Masahiko Sawada, Hayato Kuroda, Andres Freund
On at least ZFS, it can be beneficial to create new WAL files every
time and not to bother zero-filling them. Since it's not clear which
other filesystems might benefit from one or both of those things,
add individual GUCs to control those two behaviors independently and
make only very general statements in the docs.
Author: Jerry Jelinek, with some adjustments by Thomas Munro
Reviewed-by: Alvaro Herrera, Andres Freund, Tomas Vondra, Robert Haas and others
Discussion: https://postgr.es/m/CACPQ5Fo00QR7LNAcd1ZjgoBi4y97%2BK760YABs0vQHH5dLdkkMA%40mail.gmail.com
Historically guc.c has just refused examples like set work_mem = '30.1GB',
but it seems more useful for it to take that and round off the value to
some reasonable approximation of what the user said. Just rounding to
the parameter's native unit would work, but it would lead to rather
silly-looking settings, such as 31562138kB for this example. Instead
let's round to the nearest multiple of the next smaller unit (if any),
producing 30822MB.
Also, do the units conversion math in floating point and round to integer
(if needed) only at the end. This produces saner results for inputs that
aren't exact multiples of the parameter's native unit, and removes another
difference in the behavior for integer vs. float parameters.
In passing, document the ability to use hex or octal input where it
ought to be documented.
Discussion: https://postgr.es/m/1798.1552165479@sss.pgh.pa.us
This reverts commit bd09503e63.
Per discussion, it seems like what we should do instead is to
reduce the default value of autovacuum_vacuum_cost_delay by the
same factor. That's functionally equivalent as long as the
platform can accurately service the smaller delay request, which
should be true on anything released in the last 10 years or more.
And smaller, more-closely-spaced delays are better in terms of
providing a steady I/O load.
Discussion: https://postgr.es/m/28720.1552101086@sss.pgh.pa.us
This change makes it possible to specify sub-millisecond delays,
which work well on most modern platforms, though that was not true
when the cost-delay feature was designed.
To support this without breaking existing configuration entries,
improve guc.c to allow floating-point GUCs to have units. Also,
allow "us" (microseconds) as an input/output unit for time-unit GUCs.
(It's not allowed as a base unit, at least not yet.)
Likewise change the autovacuum_vacuum_cost_delay reloption to be
floating-point; this forces a catversion bump because the layout of
StdRdOptions changes.
This patch doesn't in itself change the default values or allowed
ranges for these parameters, and it should not affect the behavior
for any already-allowed setting for them.
Discussion: https://postgr.es/m/1798.1552165479@sss.pgh.pa.us
Michael Paquier
Bruce Momjian
Tom Lane
Fujii Masao
Peter Eisentraut
Heikki Linnakangas
Thomas Munro
Peter Geoghegan
Andres Freund
Jeff Davis
Etsuro Fujita
Alvaro Herrera
Tomas Vondra
Noah Misch
David Rowley
Amit Kapila
Alexander Korotkov