been applied. The patches are in the .tar.gz attachment at the end:
varchar-array.patch this patch adds support for arrays of bpchar() and
varchar(), which where always missing from postgres.
These datatypes can be used to replace the _char4,
_char8, etc., which were dropped some time ago.
block-size.patch this patch fixes many errors in the parser and other
program which happen with very large query statements
(> 8K) when using a page size larger than 8192.
This patch is needed if you want to submit queries
larger than 8K. Postgres supports tuples up to 32K
but you can't insert them because you can't submit
queries larger than 8K. My patch fixes this problem.
The patch also replaces all the occurrences of `8192'
and `1<<13' in the sources with the proper constants
defined in include files. You should now never find
8192 hardwired in C code, just to make code clearer.
--
Massimo Dal Zotto
Ok. I made patches replacing all of "#if FALSE" or "#if 0" to "#ifdef
NOT_USED" for current. I have tested these patches in that the
postgres binaries are identical.
Included patches fix a portability problem of unsetenv() used in
6.4.2 multi-byte support. unsetenv() is only avaliable on FreeBSD and
Linux so I decided to replace with putenv().
Here are patches needed to complie under AIX 4.2.
I changed configure.in, pqcomm.c, config.h.in, and fe-connect.c.
Also I had to install flex because lex did not want to translate pgc.l.
structs from libpq-fe.h, as we previously discussed.
There turned out to be sloppy coding practices in more places than
I had realized :-(, but all in all I think it was a well-worth-while
exercise.
I ended up adding several routines to libpq's API in order to respond
to application requirements that were exposed by this work. I owe the
docs crew updates for libpq.sgml to describe these changes. I'm way too
tired to work on the docs tonight, however.
This is the last major change I intend to submit for 6.4. I do want
to see if I can make libpgtcl work with Tcl 8.0 before we go final,
but hopefully that will be a minor bug fix.
From: Tom Lane <tgl@sss.pgh.pa.us>
Attached is a patch for this weekend's work on libpq. I've dealt
with several issues:
<for details: see message, in pgsql-patches archive for above data>
couple weeks ago on the hackers and interfaces lists:
1. When the backend sends a NOTICE message and closes the connection
(typically, because it was told to by the postmaster after
another backend coredumped), libpq will now print the notice
and close the connection cleanly. Formerly, the frontend app
would usually terminate ungracefully due to a SIGPIPE. (I am
not sure if 6.3.2 behaved that way, but the current cvs sources
do...)
2. libpq's various printouts to stderr are now fed through a single
"notice processor" routine, which can be overridden by the
application to direct notices someplace else. This should ease
porting libpq to Windows.
I also noticed and fixed a problem in PQprint: when sending output
to a pager subprocess, it would disable SIGPIPE in case the pager
terminates early (this is good) --- but afterwards it reset SIGPIPE
to SIG_DFL, rather than restoring the application's prior setting
(bad).
regards, tom lane
As Bruce mentioned, this is due to the conflict among changes we made.
Included patches should fix the problem(I changed all MB to
MULTIBYTE). Please let me know if you have further problem.
P.S. I did not include pathces to configure and gram.c to save the
file size(configure.in and gram.y modified).
From: t-ishii@sra.co.jp
Attached are patches to enhance the multi-byte support. (patches are
against 7/18 snapshot)
* determine encoding at initdb/createdb rather than compile time
Now initdb/createdb has an option to specify the encoding. Also, I
modified the syntax of CREATE DATABASE to accept encoding option. See
README.mb for more details.
For this purpose I have added new column "encoding" to pg_database.
Also pg_attribute and pg_class are changed to catch up the
modification to pg_database. Actually I haved added pg_database_mb.h,
pg_attribute_mb.h and pg_class_mb.h. These are used only when MB is
enabled. The reason having separate files is I couldn't find a way to
use ifdef or whatever in those files. I have to admit it looks
ugly. No way.
* support for PGCLIENTENCODING when issuing COPY command
commands/copy.c modified.
* support for SQL92 syntax "SET NAMES"
See gram.y.
* support for LATIN2-5
* add UNICODE regression test case
* new test suite for MB
New directory test/mb added.
* clean up source files
Basic idea is to have MB's own subdirectory for easier maintenance.
These are include/mb and backend/utils/mb.
The attached patches respond to discussion that was on pgsql-hackers
around the beginning of June (see thread "libpgtcl bug (and symptomatic
treatment)"). The changes are:
1. Remove code in connectDB that throws away the password after making
a connection. This doesn't really add much security IMHO --- a bad guy
with access to your client's address space can likely extract the
password anyway, to say nothing of what he might do directly. And
there's the serious shortcoming that it prevents PQreset() from working
if the database requires a password.
2. Fix coredump problem: fe_sendauth did not guard against being handed
a NULL password pointer. (This is the proximate cause of the coredump-
during-PQreset problem that Magosanyi Arpad complained of last month.)
3. Remove highly questionable "error recovery" logic in libpgtcl's
pg_exec statement.
I believe the consensus of the discussion last month was in favor of
#1 and #3, but I'm just now getting around to making the change.
I realized that #2 was a bug in process of looking at the change.
Making PQrequestCancel safe to call in a signal handler turned out to be
much easier than I feared. So here are the diffs.
Some notes:
* I modified the postmaster's packet "iodone" callback interface to allow
the callback routine to return a continue-or-drop-connection return
code; this was necessary to allow the connection to be closed after
receiving a Cancel, rather than proceeding to launch a new backend...
Being a neatnik, I also made the iodone proc have a typechecked
parameter list.
* I deleted all code I could find that had to do with OOB.
* I made some edits to ensure that all signals mentioned in the code
are referred to symbolically not by numbers ("SIGUSR2" not "2").
I think Bruce may have already done at least some of the same edits;
I hope that merging these patches is not too painful.
Through some minor changes, I have been able to compile the libpq
client libraries on the Win32 platform. Since the libpq communications
part has been rewritten, this has become much easier. Enclosed is
a patch that will allow at least Microsoft Visual C++ to compile
libpq into both a static and a dynamic library. I will take a look
at porting the psql frontend as well, but I figured it was a good
idea to send in these patches first - so no major changes are done
to the files before it gets applied (if it does).
Regards,
Magnus Hagander
I have implemented a framework of encoding translation between the
backend and the frontend. Also I have added a new variable setting
command:
SET CLIENT_ENCODING TO 'encoding';
Other features include:
Latin1 support more 8 bit cleaness
See doc/README.mb for more details. Note that the pacthes are
against May 30 snapshot.
Tatsuo Ishii
1. Rewritten libpq to allow asynchronous clients.
2. Implemented client side of cancel protocol in library,
and patched psql.c to send a cancel request upon SIGINT. The
backend doesn't notice it yet :-(
3. Implemented 'Z' protocol message addition and renaming of
copy in/out start messages. These are implemented conditionally,
ie, the client protocol version is checked; so the code should
still work with 1.0 clients.
4. Revised protocol and libpq sgml documents (don't have an SGML
compiler, though, so there may be some markup glitches here).
What remains to be done:
1. Implement addition of atttypmod field to RowDescriptor messages.
The client-side code is there but ifdef'd out. I have no idea
what to change on the backend side. The field should be sent
only if protocol >= 2.0, of course.
2. Implement backend response to cancel requests received as OOB
messages. (This prolly need not be conditional on protocol
version; just do it if you get SIGURG.)
3. Update libpq.3. (I'm hoping this can be generated mechanically
from libpq.sgml... if not, will do it by hand.) Is there any
other doco to fix?
4. Update non-libpq interfaces as necessary. I patched libpgtcl
so that it would compile, but haven't tested it. Dunno what
needs to be done with the other interfaces.
Have at it!
Tom Lane
Here's a fix for a tiny memory leak in PQsetdb/PQfinish.
(Analysis of a running program indicates there are several others, but
this is the only obvious one I saw in the code).
a dumpall. This has been happening when a second \connect is
encountered.
The faulty code was in fe-connect.c, where the memory for the user
password was freed, but the pointer itself was not set to NULL.
Later, the memory was reused and the password appeared not to be
empty, so that an attempt was made to reference it.
Oliver Elphick
I haven't had final confirmation from Peter yet, but the attached patch
needs to be applied for the Beta otherwise password and crypt
authentication just won't work.
It puts back the loop in libpq and also fixes a couple of problems with
maintaining compatability with pre-6.3 drivers.
Attached is the patch to fix the warning messages from my code. I also
fixed one which wasn't my code. Apart from the usual warnings about the
bison/yacc generated code I only have one other warning message. This
is in gramm.y around line 2234. I wasn't sure of the fix.
I've also replaced all the calls to free() in gramm.y to calls to
pfree(). Without these I was getting backend crashes with GRANT. This
might already have been fixed.
This has a problem when using any authentication other than trust or
ident.
Anything using libpq will hang, because the client will go into a loop
while connecting. The following patch simply comments out two lines (a do
and a while), removing the loop. Going through the new scheme, I can't see
why this do..while loop is in there.
I've completed the patch to fix the protocol and authentication issues I
was discussing a couple of weeks ago. The particular changes are:
- the protocol has a version number
- network byte order is used throughout
- the pg_hba.conf file is used to specify what method is used to
authenticate a frontend (either password, ident, trust, reject, krb4
or krb5)
- support for multiplexed backends is removed
- appropriate changes to man pages
- the -a switch to many programs to specify an authentication service
no longer has any effect
- the libpq.so version number has changed to 1.1
The new backend still supports the old protocol so old interfaces won't
break.
OK, here comes a patch, DBD::Pg (and possibly other 3rd party clients)
can connect to unix sockets.
Patch is against current source tree.
Background:
libpq set some policy for client, which it should not
IMHO. It prevent some 3rd party clients to connect with
unix domain sockets etc.
Rename PG_DATESTYLE to PGDATESTYLE environment variable.
Move environment variable code to a different place so it now works!
Note that regression tests can now run with "setenv PGTZ PST8PDT"
at the frontend rather than requiring the backend to have TZ set.
Subject: [PATCHES] More psql and libpq patches
Well..these would be the last patches until the release (I hope)...
I ran the regression tests while watching psql under purify, and it did
not leak even one byte.
In this patch:
* Plugged a major leak when PSQL reads files for input (either through
\i options or through -f option)
* Fixed the one remaining leak in PSQL in not clearing PGresult *results
everywhere it is supposed to. (Thanks Tymm)
* Fixed A small leak in PSQL not clearing all the PGsettings correctly.
* A not-so-obvious (but small) leak in Libpq when PQsetdb fails for any
reason.
* Added \n to some Libpq error messages to make them easier to digest..
* Finally, added /* PURIFY */ comment to some of the code indicating
the reason for why it was added/changed...for future developers.
Subject: [PATCHES] memory leak patches in libpq and psql
A couple of small memory leak patches (detected with Purify) primarily
in libpq.
* Fixed (NULL) border problem in psql (run psql, do \m, then select
something from a table...row separators will be nulls)
* Fixed memory leak with the abovementioned border not being freed
properly.
* Fixed memory leak in freePGconn() not freeing conn->port
* Fixed up PQclear() to free parts of PGresult only if these
parts are not null.
* Fixed a decent memory leak that occured after executing every command
in psql. PGresult *results was not freed most of the time.
There is still a leak being detected (2 bytes) in readline functions, but
I think this is old readline library. I will install new one and test it.
Subject: [PATCHES] libpq patch
Hi,
here is a small patch which fixes two problems:
1. libpq/libpq-fe.h:
somehow disappeared the line
#define DefaultOption ""
now compilation stops with an error complainig an
unknown DefaultOption (970508).
2. Same patch as I sent already twice, but it never made it
into the source tree: there is no default value for
AuthType and Password. This way any libpq-application
(i.e. perl-scripts) which use the function PQconnectdb
will break with PostgreSQL-6.1. The patch simply uses
an empty string as default value.
Subject: [PATCHES] libpq SET var TO patch
One last, I hope. This one corrects a bogus format string, and
actually sends the contents of PG_DATESTYLE to the backend. That
means, you can do a setenv PG_DATESTYLE 'iso', and your libpq
will pick that up and tell the backend.
Subject: [PATCHES] 970417: some large object patches
Two patches here, made against 970417. Both have to do with large
objects:
1. lobjfuncs was not initialized in PQconnectdb. This causes
failure later if large objects are used. (Someone already
caught this error in PQsetdb.)
2. Postgres functions lo_import and lo_export sometimes
produce garbage for the file names because the filename
strings aren't always terminated by \0. (VARDATA isn't
necessarily null terminated.)
The first fixes a warning from gcc about the assignment within the condition.
The extra set of parens should not make a difference, but with -Werror, they
are necessary.
The second fixes an "ln -s" invocation that assumes the current directory is
implicitly the target if not specified. Not true in all cases, and again, it
should not make a difference except to those implementation that it does.
From: "Michael P. Snyder" <msnyder@hawkeye.huntersmoon.com>
nicer. Also, I grabbed my copy of the Informix manual, and
added a couple of variables that make sense (formats for
money, time, a language setting, a timezone).
- New functions SetPGVariable() and GetPGVariable() in tcop/*.
These don't actually do anything for the moment, but should
be enough to implement the SET var_name TO var_val in the
parser?
SetPGVariable() expects just two strings, the var_name and
the var_value from above, and is expected to do the right thing.
Returns TRUE if everything okay.
From: "Martin J. Laubach" <mjl@wwx.vip.at>
of common routines in pqcomprim.c (pq communication primitives).
Not all adapted to it yet, but it's a start.
- Rewritten some of those routines, to write/read bigger chunks of
data, precomputing stuff in buffers instead of sending out byte
by byte.
- As a consequence, I need to know the endianness of the machine.
Currently I rely on getting it from machine/endian.h, but this
may not be available everywhere? (Who the hell thought it was
a good idea to pass integers to the backend the other way around
than the normal network byte order? *argl*)
- Libpq looks in the environment for magic variables, and upon
establishing a connection to the backend, sends it queries
of the form "SET var_name TO 'var_value'". This needs a change
in the backend parser (Mr. Parser, are you there? :)
- Currently it looks for two Env-Vars, namely PG_DATEFORMAT
and PG_FLOATFORMAT. What else makes sense? PG_TIMEFORMAT?
PG_TIMEZONE?
From: "Martin J. Laubach" <mjl@wwx.vip.at>
Subject: [HACKERS] password authentication
This patch adds support for plaintext password authentication. To use
it, you add a line like
host all 0.0.0.0 0.0.0.0 password pg_pwd.conf
to your pg_hba.conf, where 'pg_pwd.conf' is the name of a file containing
the usernames and password hashes in the format of the first two fields
of a Unix /etc/passwd file. (Of course, you can use a specific database
name or IP instead.)
Then, to connect with a password through libpq, you use the PQconnectdb()
function, specifying the "password=" tag in the connect string and also
adding the tag "authtype=password".
I also added a command-line switch '-u' to psql that tells it to prompt
for a username and password and use password authentication.
In particular, no more compiled-in default for PGDATA or LIBDIR. Commands
that need them need either invocation options or environment variables.
PGPORT default is hardcoded as 5432, but overrideable with options or
environment variables.
following is the patch to libpq's large object interface that
removes the requirement to include fmgr.h into fe-lobj.c.
The large object interface now ask's the backend to tell the
OID's of all the required functions in pg_proc.
From: wieck@sapserv.debis.de (Jan Wieck)
When you connect to a database with PQsetdb, as with psql, depending on
how your uninitialized variables are set, you can get a failure with a
"There is no connection to the backend" message.
The fix is to move a call to PQexec() from inside connectDB() to
PQsetdb() after connectDB() returns to PQsetdb(). That way a connection
doesn't have to be already established in order to establish it!
From: bryanh@giraffe.netgate.net (Bryan Henderson)
Here are a few minor fixes to Postgres95. Mostly I have added const
to some of the char pointers. There was also a missing header file
and a place where it looks like "==" was used when "=" was meant.
I also changed some variables from Pfin and Pfout tp pfin and pfout
because the latter shadow global variables and that just seems like
an unsafe practice which I like to avoid.
Submitted by: "D'Arcy J.M. Cain" <darcy@druid.druid.com>
Most of the changes in here look to b epurely cosmetic, and don't
affect anything...
...and some stuff is completely questionable...in that I may have reversed
some of the stuf fwe already had :(