While it's perhaps unlikely that users would write an explicit test
like "ctid IS NULL", this function is also used in range estimation,
and an incorrect answer can throw off the results for tight ranges.
Anyway it's not much code so we might as well do it.
Edmund Horner
Discussion: https://postgr.es/m/CAMyN-kCa3BFUFrCTtQeprxTU1anCd3Pua7zXstGCKq4pXgjukw@mail.gmail.com
Heikki's compiler doesn't complain about end_ptr, apparently,
but mine does.
In passing, I failed to resist the temptation to remove the
no-longer-used fldnum variable, and relocate chunk_len's
declaration to a narrower scope.
The old implementation first converted the input strings to arrays of
wchars, and performed the conversion on those. However, the conversion is
expensive, and for a large input string, consumes a lot of memory.
Allocating the large arrays also meant that these functions could not be
used on strings larger 1 GB / pg_encoding_max_length() (256 MB for UTF-8).
Avoid the conversion, and instead use the single-byte algorithm even with
multibyte encodings. That can get fooled, if there is a matching byte
sequence in the middle of a multi-byte character, so to eliminate false
positives like that, we verify any matches by walking the string character
by character with pg_mblen(). Also, if the caller needs the position of
the match, as a character-offset, we also need to walk the string to count
the characters.
Performance testing shows that walking the whole string with pg_mblen() is
somewhat slower than converting the whole string to wchars. It's still
often a win, though, because we don't need to do it if there is no match,
and even when there is, we only need to walk up to the point where the
match is, not the whole string. Even in the worst case, there would be
room for optimization: Much of the CPU time in the current loop with
pg_mblen() is function call overhead, and could be improved by inlining
pg_mblen() and/or the encoding-specific mblen() functions. But I didn't
attempt to do that as part of this patch.
Most of the callers of text_position_setup/next functions were actually
not interested in the position of the match, counted in characters. To
cater for them, refactor the text_position_next() interface into two
parts: searching for the next match (text_position_next()), and returning
the current match's position as a pointer (text_position_get_match_ptr())
or as a character offset (text_position_get_match_pos()). Getting the
pointer to the match is a more convenient API for many callers, and with
UTF-8, it allows skipping the character-walking step altogether, because
UTF-8 can't have false matches even when treated like raw byte strings.
Reviewed-by: John Naylor
Discussion: https://www.postgresql.org/message-id/3173d989-bc1c-fc8a-3b69-f24246f73876%40iki.fi
GB18030's mblen() function looks at the first and the second byte of the
multibyte character, to determine its length. copy.c had made the
assumption that mblen() only looks at the first byte, but it turns out to
work out fine, because of the way the GB18030 encoding works. COPY will
see a 4-byte encoded character as two 2-byte encoded characters, which is
enough for COPY's purposes. It cannot mix those up with delimiter or
escaping characters, because only single-byte ASCII characters are
supported as delimiters or escape characters.
Discussion: https://www.postgresql.org/message-id/7704d099-9643-2a55-fb0e-becd64400dcb%40iki.fi
Previously, only literals were allowed. This change allows general
expressions, including functions calls, which are evaluated at the
time the DDL command is executed.
Besides offering some more functionality, it simplifies the parser
structures and removes some inconsistencies in how the literals were
handled.
Author: Kyotaro Horiguchi, Tom Lane, Amit Langote
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/9f88b5e0-6da2-5227-20d0-0d7012beaa1c@lab.ntt.co.jp/
We were failing to set conislocal correctly for constraints in
partitions after partition detach, leading to those constraints becoming
undroppable. Fix by setting the flag correctly. Existing databases
might contain constraints with the conislocal wrongly set to false, for
partitions that were detached; this situation should be fixable by
applying an UPDATE on pg_constraint to set conislocal true. This
problem should otherwise be innocuous and should disappear across a
dump/restore or pg_upgrade.
Secondarily, when constraint drop was attempted in a partitioned table,
ATExecDropConstraint would try to recurse to partitions after doing
performDeletion() of the constraint in the partitioned table itself; but
since the constraint in the partitions are dropped by the initial call
of performDeletion() (because of following dependencies), the recursion
step would fail since it would not find the constraint, causing the
whole operation to fail. Fix by preventing recursion.
Reported-by: Amit Langote
Diagnosed-by: Amit Langote
Author: Amit Langote, Álvaro Herrera
Discussion: https://postgr.es/m/f2b8ead5-4131-d5a8-8016-2ea0a31250af@lab.ntt.co.jp
Given these routines are heap specific, and that there will be more
generic visibility support in via table AM, it makes sense to move the
prototypes to heapam.h (routines like HeapTupleSatisfiesVacuum will
not be exposed in a generic fashion, because they are too storage
specific).
Similarly, the code in tqual.c is specific to heap, so moving it into
access/heap/ makes sense.
Author: Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
The code in tqual.c is largely heap specific. Due to the upcoming
pluggable storage work, it therefore makes sense to move it into
access/heap/ (as the file's header notes, the tqual name isn't very
good).
But the various statically allocated snapshot and snapshot
initialization functions are now (see previous commit) generic and do
not depend on functions declared in tqual.h anymore. Therefore move.
Also move XidInMVCCSnapshot as that's useful for future AMs, and
already used outside of tqual.c.
Author: Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
This is in preparation for allowing the same snapshot be used for
different table AMs. With the current callback based approach we would
need one callback for each supported AM, which clearly would not be
extensible. Thus add a new Snapshot->snapshot_type field, and move
the dispatch into HeapTupleSatisfiesVisibility() (which is now a
function). Later work will then dispatch calls to
HeapTupleSatisfiesVisibility() and other AMs visibility functions
depending on the type of the table. The central SnapshotType enum
also seems like a good location to centralize documentation about the
intended behaviour of various types of snapshots.
As tqual.h isn't included by bufmgr.h any more (as HeapTupleSatisfies*
isn't referenced by TestForOldSnapshot() anymore) a few files now need
to include it directly.
Author: Andres Freund, loosely based on earlier work by Haribabu Kommi
Discussion:
https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.dehttps://postgr.es/m/20160812231527.GA690404@alvherre.pgsql
Detaching a partition from a partitioned table that's constrained by
foreign keys requires additional action triggers on the referenced side;
otherwise, DELETE/UPDATE actions there fail to notice rows in the table
that was partition, and so are incorrectly allowed through. With this
commit, those triggers are now created. Conversely, when a table that
has a foreign key is attached as a partition to a table that also has
the same foreign key, those action triggers are no longer needed, so we
remove them.
Add a minimal test case verifying (part of) this.
Authors: Amit Langote, Álvaro Herrera
Discussion: https://postgr.es/m/f2b8ead5-4131-d5a8-8016-2ea0a31250af@lab.ntt.co.jp
Back in commit 100340e2dc, we made relcache entries keep lists of the
foreign keys applying to the relation -- but we forgot to update
CacheInvalidateHeapTuple to flush those entries when new FKs got created
or existing ones updated/deleted. No bugs appear to have been reported
that would be explained by this ommission, but I noticed the problem
while working on an unrelated bugfix which clearly showed it. Fix by
adding relcache flush on relevant foreign key changes.
Backpatch to 9.6, like the aforementioned commit.
Discussion: https://postgr.es/m/201901211927.7mmhschxlejh@alvherre.pgsql
Reviewed-by: Tom Lane
Most of these had been obsoleted by 568d4138c / the SnapshotNow
removal.
This is is preparation for moving most of tqual.[ch] into either
snapmgr.h or heapam.h, which in turn is in preparation for pluggable
table AMs.
Author: Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
access/heapam contains functions that are very storage specific (say
heap_insert() and a lot of lower level functions), and fairly generic
infrastructure like relation_open(), heap_open() etc. In the upcoming
pluggable storage work we're introducing a layer between table
accesses in general and heapam, to allow for different storage
methods. For a bit cleaner separation it thus seems advantageous to
move generic functions like the aforementioned to their own headers.
access/relation.h will contain relation_open() etc, and access/table.h
will contain table_open() (formerly known as heap_open()). I've decided
for table.h not to include relation.h, but we might change that at a
later stage.
relation.h already exists in another directory, but the other
plausible name (rel.h) also conflicts. It'd be nice if there were a
non-conflicting name, but nobody came up with a suggestion. It's
possible that the appropriate way to address the naming conflict would
be to rename nodes/relation.h, which isn't particularly well named.
To avoid breaking a lot of extensions that just use heap_open() etc,
table.h has macros mapping the old names to the new ones, and heapam.h
includes relation, table.h. That also allows to keep the
bulk renaming of existing callers in a separate commit.
Author: Andres Freund
Discussion: https://postgr.es/m/20190111000539.xbv7s6w7ilcvm7dp@alap3.anarazel.de
Historically, the notices output by DROP CASCADE tended to come out
in uncertain order, and in some cases you might get different claims
about which object depends on which other one. This is because we
just traversed the dependency tree in the order in which pg_depend
entries are seen, and nbtree has never promised anything about the
order of equal-keyed index entries. We've put up with that for years,
hacking regression tests when necessary to prevent them from emitting
unstable output. However, it's a problem for pending work that will
change nbtree's behavior for equal keys, as that causes unexpected
changes in the regression test results.
Hence, adjust findDependentObjects to sort the results of each
indexscan before processing them. The sort is on descending OID of
the dependent objects, hence more or less reverse creation order.
While this rule could still result in bogus regression test failures
if an OID wraparound occurred mid-test, that seems unlikely to happen
in any plausible development or packaging-test scenario.
This is enough to ensure output stability for ordinary DROP CASCADE
commands, but not for DROP OWNED BY, because that has a different
code path with the same problem. We might later choose to sort in
the DROP OWNED BY code as well, but this patch doesn't do so.
I've also not done anything about reverting the existing hacks to
suppress unstable DROP CASCADE output in specific regression tests.
It might be worth undoing those, but it seems like a distinct question.
The first indexscan loop in findDependentObjects is not touched,
meaning there is a hazard of unstable error reports from that too.
However, said hazard is not the fault of that code: it was designed
on the assumption that there could be at most one "owning" object
to complain about, and that assumption does not seem unreasonable.
The recent patch that added the possibility of multiple
DEPENDENCY_INTERNAL_AUTO links broke that assumption, but we should
fix that situation not band-aid around it. That's a matter for
another patch, though.
Discussion: https://postgr.es/m/12244.1547854440@sss.pgh.pa.us
Previously, in set_append_rel_size(), we generated tlists and EC members
for dummy children for possible use by partition-wise join, even if
partition-wise join was disabled or the top parent was not a partitioned
table, but adding such EC members causes noticeable planning speed
degradation for queries with certain kinds of join quals like
"(foo.x + bar.y) = constant" where foo and bar are partitioned tables in
cases where there are lots of dummy children, as the EC members lists
grow huge, especially for the ECs derived from such join quals, which
makes the search for the parent EC members in add_child_rel_equivalences()
very time-consuming. Postpone the work until such children are actually
involved in a partition-wise join.
Reported-by: Sanyo Capobiango
Analyzed-by: Justin Pryzby and Alvaro Herrera
Author: Amit Langote, with a few additional changes by me
Reviewed-by: Ashutosh Bapat
Backpatch-through: v11 where partition-wise join was added
Discussion: https://postgr.es/m/CAO698qZnrxoZu7MEtfiJmpmUtz3AVYFVnwzR%2BpqjF%3DrmKBTgpw%40mail.gmail.com
Extends the COPY FROM command with a WHERE condition, which allows doing
various types of filtering while importing the data (random sampling,
condition on a data column, etc.). Until now such filtering required
either preprocessing of the input data, or importing all data and then
filtering in the database. COPY FROM ... WHERE is an easy-to-use and
low-overhead alternative for most simple cases.
Author: Surafel Temesgen
Reviewed-by: Tomas Vondra, Masahiko Sawada, Lim Myungkyu
Discussion: https://www.postgresql.org/message-id/flat/CALAY4q_DdpWDuB5-Zyi-oTtO2uSk8pmy+dupiRe3AvAc++1imA@mail.gmail.com
Commit c0d0e54084 replaced the ones in the documentation, but missed out
on the ones in the code. Replace those as well, but unlike c0d0e54084,
don't backpatch the code changes to avoid breaking translations.
When creating a foreign key in a partitioned table, if some partitions
already have equivalent constraints, we wastefully create duplicates of
the constraints instead of attaching to the existing ones. That's
inconsistent with the de-duplication that is applied when a table is
attached as a partition. To fix, reuse the FK-cloning code instead of
having a separate code path.
Backpatch to Postgres 11. This is a subtle behavior change, but surely
a welcome one since there's no use in having duplicate foreign keys.
Discovered by Álvaro Herrera while thinking about a different problem
reported by Jesper Pedersen (bug #15587).
Author: Álvaro Herrera
Discussion: https://postgr.es/m/201901151935.zfadrzvyof4k@alvherre.pgsql
My commit 3de241dba8 introduced some code to create a clone of a
foreign key to a partition, but I put it in pg_constraint.c because it
was too close to the contents of the pg_constraint row. With the
previous commit that split out the constraint tuple deconstruction into
its own routine, it makes more sense to have the FK-cloning function in
tablecmds.c, mostly because its static subroutine can then be used by a
future bugfix.
My initial posting of this patch had this routine as static in
tablecmds.c, but sadly this function is already part of the Postgres 11
ABI as exported from pg_constraint.c, so keep it as exported also just
to avoid breaking any possible users of it.
My commit 3de241dba8 introduced some code (in tablecmds.c) to obtain
data from a pg_constraint row for a foreign key, that already existed in
ri_triggers.c. Split it out into its own routine in pg_constraint.c,
where it naturally belongs.
No functional code changes, only code movement.
Backpatch to pg11, because a future bugfix is simpler after this.
A cascaded drop might find independent reasons to drop both a table
and some column of the table (for instance, a schema drop might include
dropping a data type used in some table in the schema). Depending on
the order of visitation of pg_depend entries, we might report the
table column and the whole table as separate objects-to-be-dropped,
or we might only report the table. This is confusing and leads to
unstable regression test output, so fix it to report only the table
regardless of visitation order.
Per gripe from Peter Geoghegan. This is just cosmetic from a user's
standpoint, and we haven't actually seen regression test problems in
practice (yet), so I'll refrain from back-patching.
Discussion: https://postgr.es/m/15908.1547762076@sss.pgh.pa.us
Attempting to use a temporary table within a two-phase transaction is
forbidden for ages. However, there have been uncovered grounds for
a couple of other object types and commands which work on temporary
objects with two-phase commit. In short, trying to create, lock or drop
an object on a temporary schema should not be authorized within a
two-phase transaction, as it would cause its state to create
dependencies with other sessions, causing all sorts of side effects with
the existing session or other sessions spawned later on trying to use
the same temporary schema name.
Regression tests are added to cover all the grounds found, the original
report mentioned function creation, but monitoring closer there are many
other patterns with LOCK, DROP or CREATE EXTENSION which are involved.
One of the symptoms resulting in combining both is that the session
which used the temporary schema is not able to shut down completely,
waiting for being able to drop the temporary schema, something that it
cannot complete because of the two-phase transaction involved with
temporary objects. In this case the client is able to disconnect but
the session remains alive on the backend-side, potentially blocking
connection backend slots from being used. Other problems reported could
also involve server crashes.
This is back-patched down to v10, which is where 9b013dc has introduced
MyXactFlags, something that this patch relies on.
Reported-by: Alexey Bashtanov
Author: Michael Paquier
Reviewed-by: Masahiko Sawada
Discussion: https://postgr.es/m/5d910e2e-0db8-ec06-dd5f-baec420513c3@imap.cc
Backpatch-through: 10
Previously, parseCheckAggregates was run before
assign_query_collations, but this causes problems if any expression
has already had a collation assigned by some transform function (e.g.
transformCaseExpr) before parseCheckAggregates runs. The differing
collations would cause expressions not to be recognized as equal to
the ones in the GROUP BY clause, leading to spurious errors about
unaggregated column references.
The result was that CASE expr WHEN val ... would fail when "expr"
contained a GROUPING() expression or matched one of the group by
expressions, and where collatable types were involved; whereas the
supposedly identical CASE WHEN expr = val ... would succeed.
Backpatch all the way; this appears to have been wrong ever since
collations were introduced.
Per report from Guillaume Lelarge, analysis and patch by me.
Discussion: https://postgr.es/m/CAECtzeVSO_US8C2Khgfv54ZMUOBR4sWq+6_bLrETnWExHT=rFg@mail.gmail.com
Discussion: https://postgr.es/m/87muo0k0c7.fsf@news-spur.riddles.org.uk
This is architecturally mildly problematic, which becomes more
pronounced with the upcoming introduction of pluggable storage.
To fix, teach heap_parallelscan_estimate() to deal with SnapshotAny
snapshots, and then use it from _bt_parallel_estimate_shared().
Author: Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
The parent of some WCO expressions was, apparently by accident, set to
the the source of DML queries, rather than the target table. This
causes problems for the upcoming pluggable storage work, because the
target and source table might be of different storage types.
It's possible that this is already problematic, but neither
experimenting nor inquiries on -hackers have found them. So don't
backpatch for now.
Author: Andres Freund
Discussion: https://postgr.es/m/20181205225213.hiwa3kgoxeybqcqv@alap3.anarazel.de
This reverts commit c203d6cf8 and some follow-on fixes, completing the
task begun in commit 5d28c9bd7. If that feature is ever resurrected,
the code will look quite a bit different from this, so it seems best
to start from a clean slate.
The v11 branch is not touched; in that branch, the recheck_on_update
storage option remains present, but nonfunctional and undocumented.
Discussion: https://postgr.es/m/20190114223409.3tcvejfhlvbucrv5@alap3.anarazel.de
This is the genam.h equivalent of 4c850ecec6 (which removed
heapam.h from a lot of other headers). There's still a few header
includes of genam.h, but not from central headers anymore.
As a few headers are not indirectly included anymore, execnodes.h and
relscan.h need a few additional includes. Some of the depended on
types were replacable by using the underlying structs, but e.g. for
Snapshot in execnodes.h that'd have gotten more invasive than
reasonable in this commit.
Like the aforementioned commit 4c850ecec6, this requires adding new
genam.h includes to a number of backend files, which likely is also
required in a few external projects.
Author: Andres Freund
Discussion: https://postgr.es/m/20190114000701.y4ttcb74jpskkcfb@alap3.anarazel.de
We usually don't change the name of structs between the struct name
itself and the name of the typedef. Additionally, structs that are
usually used via a typedef that hides being a pointer, are commonly
suffixed Data. Change tupdesc code to follow those convention.
This is triggered by a future patch that intends to forward declare
TupleDescData in another header - keeping with the naming scheme makes
that easier to understand.
Author: Andres Freund
Discussion: https://postgr.es/m/20190114000701.y4ttcb74jpskkcfb@alap3.anarazel.de
heapam.h previously was included in a number of widely used
headers (e.g. execnodes.h, indirectly in executor.h, ...). That's
problematic on its own, as heapam.h contains a lot of low-level
details that don't need to be exposed that widely, but becomes more
problematic with the upcoming introduction of pluggable table storage
- it seems inappropriate for heapam.h to be included that widely
afterwards.
heapam.h was largely only included in other headers to get the
HeapScanDesc typedef (which was defined in heapam.h, even though
HeapScanDescData is defined in relscan.h). The better solution here
seems to be to just use the underlying struct (forward declared where
necessary). Similar for BulkInsertState.
Another problem was that LockTupleMode was used in executor.h - parts
of the file tried to cope without heapam.h, but due to the fact that
it indirectly included it, several subsequent violations of that goal
were not not noticed. We could just reuse the approach of declaring
parameters as int, but it seems nicer to move LockTupleMode to
lockoptions.h - that's not a perfect location, but also doesn't seem
bad.
As a number of files relied on implicitly included heapam.h, a
significant number of files grew an explicit include. It's quite
probably that a few external projects will need to do the same.
Author: Andres Freund
Reviewed-By: Alvaro Herrera
Discussion: https://postgr.es/m/20190114000701.y4ttcb74jpskkcfb@alap3.anarazel.de
These have been found while cross-checking for the use of unique words
in the documentation, and a wait event was not getting generated in a way
consistent to what the documentation provided.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/9b5a3a85-899a-ae62-dbab-1e7943aa5ab1@gmail.com
After 578b229718 / the removal of WITH OIDS support, older dump files
containing
SET default_with_oids = false;
either report unnecessary errors (as the subsequent tables have no
oids) or even fail to restore entirely (when using transaction mode).
To avoid that, re-add the GUC, but don't allow setting it to true.
Per complaint from Tom Lane.
Author: Amit Khandekar, editorialized by me
Discussion: https://postgr.es/m/CAJ3gD9dZyxrtL0rJfoNoOj6v7fJSDaXBngi9wy5XU8m-ioXhAA@mail.gmail.com
If trying to use something else than a plain table as logical
replication target, a rather-generic error message gets used to report
the problem. This can be confusing when it comes to foreign tables and
partitioned tables, so use more dedicated messages in these cases.
Author: Amit Langote
Reviewed-by: Peter Eisentraut, Magnus Hagander, Michael Paquier
Discussion: https://postgr.es/m/41799bee-40eb-7bb5-80b1-325ce17518bc@lab.ntt.co.jp
Up to now, createplan.c attempted to share PARAM_EXEC slots for
NestLoopParams across different plan levels, if the same underlying Var
was being fed down to different righthand-side subplan trees by different
NestLoops. This was, I think, more of an artifact of using subselect.c's
PlannerParamItem infrastructure than an explicit design goal, but anyway
that was the end result.
This works well enough as long as the plan tree is executing synchronously,
but the feature whereby Gather can execute the parallelized subplan locally
breaks it. An upper NestLoop node might execute for a row retrieved from
a parallel worker, and assign a value for a PARAM_EXEC slot from that row,
while the leader's copy of the parallelized subplan is suspended with a
different active value of the row the Var comes from. When control
eventually returns to the leader's subplan, it gets the wrong answers if
the same PARAM_EXEC slot is being used within the subplan, as reported
in bug #15577 from Bartosz Polnik.
This is pretty reminiscent of the problem fixed in commit 46c508fbc, and
the proper fix seems to be the same: don't try to share PARAM_EXEC slots
across different levels of controlling NestLoop nodes.
This requires decoupling NestLoopParam handling from PlannerParamItem
handling, although the logic remains somewhat similar. To avoid bizarre
division of labor between subselect.c and createplan.c, I decided to move
all the param-slot-assignment logic for both cases out of those files
and put it into a new file paramassign.c. Hopefully it's a bit better
documented now, too.
A regression test case for this might be nice, but we don't know a
test case that triggers the problem with a suitably small amount
of data.
Back-patch to 9.6 where we added Gather nodes. It's conceivable that
related problems exist in older branches; but without some evidence
for that, I'll leave the older branches alone.
Discussion: https://postgr.es/m/15577-ca61ab18904af852@postgresql.org
This value represents the default behavior of using the current
timeline. Previously, this was represented by an empty string.
(Before the removal of recovery.conf, this setting could not be chosen
explicitly but was used when recovery_target_timeline was not
mentioned at all.)
Discussion: https://www.postgresql.org/message-id/flat/6dd2c23a-4162-8469-410f-bfe146e28c0c@2ndquadrant.com/
Reviewed-by: David Steele <david@pgmasters.net>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
This was an oversight in commit 16828d5c. If the table is going to be
rewritten, we simply clear all the missing values from all the table's
attributes, since there will no longer be any rows with the attributes
missing. Otherwise, we repackage the missing value in an array
constructed with the new type specifications.
Backpatch to release 11.
This fixes bug #15446, reported by Dmitry Molotkov
Reviewed by Dean Rasheed
Avoid using "typeid" as a parameter name in header files, since that
is a C++ keyword. These cases were introduced recently, in 04fe805a1
and 586b98fdf.
Since I'm an incurable neatnik, also rename these parameters in the
underlying function definitions. That's not really necessary per
project rules, but I don't like function declarations that don't
quite agree with the underlying definitions.
Per src/tools/pginclude/cpluspluscheck.
This commit moves expand_inherited_tables and underlings from
optimizer/prep/prepunionc.c to optimizer/utils/inherit.c.
Also, all of the AppendRelInfo-based expression manipulation routines
are moved to optimizer/utils/appendinfo.c.
No functional code changes. One exception is the introduction of
make_append_rel_info, but that's still just moving around code.
Also, stop including <limits.h> in prepunion.c, which no longer needs
it since 3fc6e2d7f5. I (Álvaro) noticed this because Amit was copying
that to inherit.c, which likewise doesn't need it.
Author: Amit Langote
Discussion: https://postgr.es/m/3be67028-a00a-502c-199a-da00eec8fb6e@lab.ntt.co.jp
This index array was originally defined to have 10000 entries (ranging
up to FirstGenbkiObjectId), but we really only need entries up to the
last existing builtin function OID, currently 6121. That saves close
to 8K of never-accessed space in the server executable, at the small
price of one more fetch in fmgr_isbuiltin().
We could reduce the array size still further by renumbering a few of
the highest-numbered builtin functions; but there's a small risk of
breaking clients that have chosen to hardwire those function OIDs,
so it's not clear if it'd be worth the trouble. (We should, however,
discourage future patches from choosing function OIDs above 6K as long
as there's still lots of space below that.)
Discussion: https://postgr.es/m/12359.1547063064@sss.pgh.pa.us
Previously, ScanKeywordLookup was passed an array of string pointers.
This had some performance deficiencies: the strings themselves might
be scattered all over the place depending on the compiler (and some
quick checking shows that at least with gcc-on-Linux, they indeed
weren't reliably close together). That led to very cache-unfriendly
behavior as the binary search touched strings in many different pages.
Also, depending on the platform, the string pointers might need to
be adjusted at program start, so that they couldn't be simple constant
data. And the ScanKeyword struct had been designed with an eye to
32-bit machines originally; on 64-bit it requires 16 bytes per
keyword, making it even more cache-unfriendly.
Redesign so that the keyword strings themselves are allocated
consecutively (as part of one big char-string constant), thereby
eliminating the touch-lots-of-unrelated-pages syndrome. And get
rid of the ScanKeyword array in favor of three separate arrays:
uint16 offsets into the keyword array, uint16 token codes, and
uint8 keyword categories. That reduces the overhead per keyword
to 5 bytes instead of 16 (even less in programs that only need
one of the token codes and categories); moreover, the binary search
only touches the offsets array, further reducing its cache footprint.
This also lets us put the token codes somewhere else than the
keyword strings are, which avoids some unpleasant build dependencies.
While we're at it, wrap the data used by ScanKeywordLookup into
a struct that can be treated as an opaque type by most callers.
That doesn't change things much right now, but it will make it
less painful to switch to a hash-based lookup method, as is being
discussed in the mailing list thread.
Most of the change here is associated with adding a generator
script that can build the new data structure from the same
list-of-PG_KEYWORD header representation we used before.
The PG_KEYWORD lists that plpgsql and ecpg used to embed in
their scanner .c files have to be moved into headers, and the
Makefiles have to be taught to invoke the generator script.
This work is also necessary if we're to consider hash-based lookup,
since the generator script is what would be responsible for
constructing a hash table.
Aside from saving a few kilobytes in each program that includes
the keyword table, this seems to speed up raw parsing (flex+bison)
by a few percent. So it's worth doing even as it stands, though
we think we can gain even more with a follow-on patch to switch
to hash-based lookup.
John Naylor, with further hacking by me
Discussion: https://postgr.es/m/CAJVSVGXdFVU2sgym89XPL=Lv1zOS5=EHHQ8XWNzFL=mTXkKMLw@mail.gmail.com
Some relation kinds had relfilenode set to some non-zero value, but
apparently the actual files did not really exist because creation was
prevented elsewhere. Get rid of the phony pg_class.relfilenode values.
Catversion bumped, but only because the sanity_test check will fail if
run in a system initdb'd with the previous version.
Reviewed-by: Kyotaro HORIGUCHI, Michael Paquier
Discussion: https://postgr.es/m/20181206215552.fm2ypuxq6nhpwjuc@alvherre.pgsql
Instead of running a SQL script to create the standard conversion
functions and pg_conversion entries, put those entries into the
initial data in postgres.bki.
This shaves a few percent off the runtime of initdb, and also allows
accurate comments to be attached to the conversion functions; the
previous script labeled them with machine-generated comments that
were not quite right for multi-purpose conversion functions.
Also, we can get rid of the duplicative Makefile and MSVC perl
implementations of the generation code for that SQL script.
A functional change is that these pg_proc and pg_conversion entries
are now "pinned" by initdb. Leaving them unpinned was perhaps a
good thing back while the conversions feature was under development,
but there seems no valid reason for it now.
Also, the conversion functions are now marked as immutable, where
before they were volatile by virtue of lacking any explicit
specification. That seems like it was just an oversight.
To avoid using magic constants in pg_conversion.dat, extend
genbki.pl to allow encoding names to be converted, much as it
does for language, access method, etc names.
John Naylor
Discussion: https://postgr.es/m/CAJVSVGWtUqxpfAaxS88vEGvi+jKzWZb2EStu5io-UPc4p9rSJg@mail.gmail.com
This patch teaches genbki.pl to replace pg_language names by OIDs
in much the same way as it already does for pg_am names etc, and
converts pg_proc.dat to use such symbolic references in the prolang
column.
Aside from getting rid of a few more magic numbers in the initial
catalog data, this means that Gen_fmgrtab.pl no longer needs to read
pg_language.dat, since it doesn't have to know the OID of the "internal"
language; now it's just looking for the string "internal".
No need for a catversion bump, since the contents of postgres.bki
don't actually change at all.
John Naylor
Discussion: https://postgr.es/m/CAJVSVGWtUqxpfAaxS88vEGvi+jKzWZb2EStu5io-UPc4p9rSJg@mail.gmail.com
This patch changes the rule for whether or not a tuple seen by ANALYZE
should be included in its sample.
When we last touched this logic, in commit 51e1445f1, we weren't
thinking very hard about tuples being UPDATEd by a long-running
concurrent transaction. In such a case, we might see the pre-image as
either LIVE or DELETE_IN_PROGRESS depending on timing; and we might see
the post-image not at all, or as INSERT_IN_PROGRESS. Since the existing
code will not sample either DELETE_IN_PROGRESS or INSERT_IN_PROGRESS
tuples, this leads to concurrently-updated rows being omitted from the
sample entirely. That's not very helpful, and it's especially the wrong
thing if the concurrent transaction ends up rolling back.
The right thing seems to be to sample DELETE_IN_PROGRESS rows just as if
they were live. This makes the "sample it" and "count it" decisions the
same, which seems good for consistency. It's clearly the right thing
if the concurrent transaction ends up rolling back; in effect, we are
sampling as though IN_PROGRESS transactions haven't happened yet.
Also, this combination of choices ensures maximum robustness against
the different combinations of whether and in which state we might see the
pre- and post-images of an update.
It's slightly annoying that we end up recording immediately-out-of-date
stats in the case where the transaction does commit, but on the other
hand the stats are fine for columns that didn't change in the update.
And the alternative of sampling INSERT_IN_PROGRESS rows instead seems
like a bad idea, because then the sampling would be inconsistent with
the way rows are counted for the stats report.
Per report from Mark Chambers; thanks to Jeff Janes for diagnosing
what was happening. Back-patch to all supported versions.
Discussion: https://postgr.es/m/CAFh58O_Myr6G3tcH3gcGrF-=OExB08PJdWZcSBcEcovaiPsrHA@mail.gmail.com
MinMaxExpr invokes the btree comparison function for its input datatype,
so it's only leakproof if that function is. Many such functions are
indeed leakproof, but others are not, and we should not just assume that
they are. Hence, adjust contain_leaked_vars to verify the leakproofness
of the referenced function explicitly.
I didn't add a regression test because it would need to depend on
some particular comparison function being leaky, and that's a moving
target, per discussion.
This has been wrong all along, so back-patch to supported branches.
Discussion: https://postgr.es/m/31042.1546194242@sss.pgh.pa.us
It's important for link commands to list *.o input files before -l
switches for libraries, as library code may not get pulled into the link
unless referenced by an earlier command-line entry. This is certainly
necessary for static libraries (.a style). Apparently on some platforms
it is also necessary for shared libraries, as reported by Donald Dong.
We often put -l switches for within-tree libraries into LDFLAGS, meaning
that link commands that list *.o files after LDFLAGS are hazardous.
Most of our link commands got this right, but a few did not. In
particular, places that relied on gmake's default implicit link rule
failed, because that puts LDFLAGS first. Fix that by overriding the
built-in rule with our own. The implicit link rules in
src/makefiles/Makefile.* for single-.o-file shared libraries mostly
got this wrong too, so fix them. I also changed the link rules for the
backend and a couple of other places for consistency, even though they
are not (currently) at risk because they aren't adding any -l switches
to LDFLAGS.
Arguably, the real problem here is that we're abusing LDFLAGS by
putting -l switches in it and we should stop doing that. But changing
that would be quite invasive, so I'm not eager to do so.
Perhaps this is a candidate for back-patching, but so far it seems
that problems can only be exhibited in test code we don't normally
build, and at least some of the problems are new in HEAD anyway.
So I'll refrain for now.
Donald Dong and Tom Lane
Discussion: https://postgr.es/m/CAKABAquXn-BF-vBeRZxhzvPyfMqgGuc74p8BmQZyCFDpyROBJQ@mail.gmail.com
This removes a portion of infrastructure introduced by fe0a0b5 to allow
compilation of Postgres in environments where no strong random source is
available, meaning that there is no linking to OpenSSL and no
/dev/urandom (Windows having its own CryptoAPI). No systems shipped
this century lack /dev/urandom, and the buildfarm is actually not
testing this switch at all, so just remove it. This simplifies
particularly some backend code which included a fallback implementation
using shared memory, and removes a set of alternate regression output
files from pgcrypto.
Author: Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/20181230063219.GG608@paquier.xyz
The function name pg_stop_backup() has been included for ages in some
log messages when stopping the backup, which is confusing for base
backups taken with the replication protocol because this function is
never called. Some other comments and messages in this area are
improved while on it.
The new wording is based on input and suggestions from several people,
all listed below.
Author: Michael Paquier
Reviewed-by: Peter Eisentraut, Álvaro Herrera, Tom Lane
Discussion: https://postgr.es/m/20181221040510.GA12599@paquier.xyz
In commit 8b08f7d482 I added member relationId to IndexStmt struct.
I'm now not sure why; DefineIndex doesn't need it, since the relation
OID is passed as a separate argument anyway. Remove it.
Also remove a redundant assignment to the relationId argument (it wasn't
redundant when added by commit e093dcdd28, but should have been removed
in commit 5f173040e3), and use relationId instead of stmt->relation when
locking the relation in the second phase of CREATE INDEX CONCURRENTLY,
which is not only confusing but it means we resolve the name twice for
no reason.
While rearranging code in tidpath.c, I overlooked the fact that we ought
to check restriction_is_securely_promotable when trying to use a join
clause as a TID qual. Since tideq itself is leakproof, this wouldn't
really allow any interesting leak AFAICT, but it still seems like we
had better check it.
For consistency with the corresponding logic in indxpath.c, also
check rinfo->pseudoconstant. I'm not sure right now that it's
possible for that to be set in a join clause, but if it were,
a match couldn't be made anyway.
Up to now we've not worried much about joins where the join key is a
relation's CTID column, reasoning that storing a table's CTIDs in some
other table would be pretty useless. However, there are use-cases for
this sort of query involving self-joins, so that argument doesn't really
hold water.
With larger relations, a merge or hash join is desirable. We had a btree
opclass for type "tid", allowing merge joins on CTID, but no hash opclass
so that hash joins weren't possible. Add the missing infrastructure.
This also potentially enables hash aggregation on "tid", though the
use-cases for that aren't too clear.
Discussion: https://postgr.es/m/1853.1545453106@sss.pgh.pa.us
Up to now we've not worried much about joins where the join key is a
relation's CTID column, reasoning that storing a table's CTIDs in some
other table would be pretty useless. However, there are use-cases for
this sort of query involving self-joins, so that argument doesn't really
hold water.
This patch allows generating plans for joins on CTID that use a nestloop
with inner TidScan, similar to what we might do with an index on the join
column. This is the most efficient way to join when the outer side of
the nestloop is expected to yield relatively few rows.
This change requires upgrading tidpath.c and the generated TidPaths
to work with RestrictInfos instead of bare qual clauses, but that's
long-postponed technical debt anyway.
Discussion: https://postgr.es/m/17443.1545435266@sss.pgh.pa.us
Doing this requires an assumption that the invoked btree comparison
function is immutable. We could check that explicitly, but in other
places such as contain_mutable_functions we just assume that it's true,
so we may as well do likewise here. (If the comparison function's
behavior isn't immutable, the sort order in indexes built with it would
be unstable, so it seems certainly wrong for it not to be so.)
Vik Fearing
Discussion: https://postgr.es/m/c6e8504c-4c43-35fa-6c8f-3c0b80a912cc@2ndquadrant.com
Previously we just set the seed based on process ID and start timestamp.
Both those values are directly available within the session, and can
be found out or guessed by other users too, making the session's series
of random(3) values fairly predictable. Up to now, our backend-internal
uses of random(3) haven't seemed security-critical, but commit 88bdbd3f7
added one that potentially is: when using log_statement_sample_rate, a
user might be able to predict which of his SQL statements will get logged.
To improve this situation, upgrade the per-process seed initialization
method to use pg_strong_random() if available, greatly reducing the
predictability of the initial seed value. This adds a few tens of
microseconds to process start time, but since backend startup time is
at least a couple of milliseconds, that seems an acceptable price.
This means that pg_strong_random() needs to be able to run without
reliance on any backend infrastructure, since it will be invoked
before any of that is up. It was safe for that already, but adjust
comments and #include commands to make it clearer.
Discussion: https://postgr.es/m/3859.1545849900@sss.pgh.pa.us
Previously, the SQL random() function depended on libc's random(3),
and setseed() invoked srandom(3). This results in interference between
these functions and backend-internal uses of random(3). We'd never paid
too much mind to that, but in the wake of commit 88bdbd3f7 which added
log_statement_sample_rate, the interference arguably has a security
consequence: if log_statement_sample_rate is active then an unprivileged
user could probably control which if any of his SQL commands get logged,
by issuing setseed() at the right times. That seems bad.
To fix this reliably, we need random() and setseed() to use their own
private random state variable. Standard random(3) isn't amenable to such
usage, so let's switch to pg_erand48(). It's hard to say whether that's
more or less "random" than any particular platform's version of random(3),
but it does have a wider seed value and a longer period than are required
by POSIX, so we can hope that this isn't a big downgrade. Also, we should
now have uniform behavior of random() across platforms, which is worth
something.
While at it, upgrade the per-process seed initialization method to use
pg_strong_random() if available, greatly reducing the predictability
of the initial seed value. (I'll separately do something similar for
the internal uses of random().)
In addition to forestalling the possible security problem, this has a
benefit in the other direction, which is that we can now document
setseed() as guaranteeing a reproducible sequence of random() values.
Previously, because of the possibility of internal calls of random(3),
we could not promise any such thing.
Discussion: https://postgr.es/m/3859.1545849900@sss.pgh.pa.us
According to README we acquire predicate locks on entry tree leafs and posting
tree roots. However, when ginFindLeafPage() is going to lock leaf in exclusive
mode, then it checks root for conflicts regardless whether it's a entry or
posting tree. Assuming that we never place predicate lock on entry tree root
(excluding corner case when root is leaf), this check is redundant. This
commit removes this check. Now, root conflict checking is controlled by
separate argument of ginFindLeafPage().
Discussion: https://postgr.es/m/CAPpHfdv7rrDyy%3DMgsaK-L9kk0AH7az0B-mdC3w3p0FSb9uoyEg%40mail.gmail.com
Author: Alexander Korotkov
Backpatch-through: 11
Inheritance trees can include temporary tables if the parent is
permanent, which makes possible the presence of multiple temporary
children from different sessions. Trying to issue a TRUNCATE on the
parent in this scenario causes a failure, so similarly to any other
queries just ignore such cases, which makes TRUNCATE work
transparently.
This makes truncation behave similarly to any other DML query working on
the parent table with queries which need to be work on the children. A
set of isolation tests is added to cover basic cases.
Reported-by: Zhou Digoal
Author: Amit Langote, Michael Paquier
Discussion: https://postgr.es/m/15565-ce67a48d0244436a@postgresql.org
Backpatch-through: 9.4
While it seems OK to not be concerned about fsync() failure for a
pre-existing signal file, it's not OK to not even check for open()
failure. This at least causes complaints from static analyzers,
and I think on some platforms passing -1 to fsync() or close() might
trigger assertion-type failures. Also add (void) casts to make clear
that we're ignoring fsync's result intentionally.
Oversights in commit 2dedf4d9a, noted by Coverity.
At the end of recovery for the post-promotion process, a new history
file is created followed by the last partial segment of the previous
timeline. Based on the timing, the archiver would first try to archive
the last partial segment and then the history file. This can delay the
detection of a new timeline taken, particularly depending on the time it
takes to transfer the last partial segment as it delays the moment the
history file of the new timeline gets archived. This can cause promoted
standbys to use the same timeline as one already taken depending on the
circumstances if multiple instances look at archives at the same
location.
This commit changes the order of archiving so as history files are
archived in priority over other file types, which reduces the likelihood
of the same timeline being taken (still not reducing the window to
zero), and it makes the archiver behave more consistently with the
startup process doing its post-promotion business.
Author: David Steele
Reviewed-by: Michael Paquier, Kyotaro Horiguchi
Discussion: https://postgr.es/m/929068cf-69e1-bba2-9dc0-e05986aed471@pgmasters.net
Backpatch-through: 9.5
COPY can skip writing WAL when loading data on a table which has been
created in the same transaction as the one loading the data, however
this cannot work on views or foreign table as this would result in
trying to flush relation files which do not exist. So disable the
optimization so as commands are able to work the same way with any
configuration of wal_level.
Tests are added to cover the different cases, which need to have
wal_level set to minimal to allow the problem to show up, and that is
not the default configuration.
Reported-by: Luis M. Carril, Etsuro Fujita
Author: Amit Langote, Michael Paquier
Reviewed-by: Etsuro Fujita
Discussion: https://postgr.es/m/15552-c64aa14c5c22f63c@postgresql.org
Backpatch-through: 10, where support for COPY on views has been added,
while v11 has added support for COPY on foreign tables.
013ebc0a7b implements so-called GiST microvacuum. That is gistgettuple() marks
index tuples as dead when kill_prior_tuple is set. Later, when new tuple
insertion claims page space, those dead index tuples are physically deleted
from page. When this deletion is replayed on standby, it might conflict with
read-only queries. But 013ebc0a7b doesn't handle this. That may lead to
disappearance of some tuples from read-only snapshots on standby.
This commit implements resolving of conflicts between replay of GiST microvacuum
and standby queries. On the master we implement new WAL record type
XLOG_GIST_DELETE, which comprises necessary information. On stable releases
we've to be tricky to keep WAL compatibility. Information required for conflict
processing is just appended to data of XLOG_GIST_PAGE_UPDATE record. So,
PostgreSQL version, which doesn't know about conflict processing, will just
ignore that.
Reported-by: Andres Freund
Diagnosed-by: Andres Freund
Discussion: https://postgr.es/m/20181212224524.scafnlyjindmrbe6%40alap3.anarazel.de
Author: Alexander Korotkov
Backpatch-through: 9.6
The SQL spec says that sql_identifier is a domain over varchar,
but it also says that that domain is supposed to represent the set
of valid identifiers for the implementation, in particular applying
a length limit matching the implementation's identifier length limit.
We were declaring sql_identifier as just "character varying", thus
duplicating what the spec says about base type, but entirely failing
at the rest of it.
Instead, let's declare sql_identifier as a domain over type "name".
(We can drop the COLLATE "C" added by commit 6b0faf723, since that's
now implicit in "name".) With the recent improvements to name's
comparison support, there's not a lot of functional difference between
name and varchar. So although in principle this is a spec deviation,
it's a pretty minor one. And correctly enforcing PG's name length limit
is a good thing; on balance this seems closer to the intent of the spec
than what we had.
But that's all just language-lawyering. The *real* reason to do this is
that it makes sql_identifier columns exposed by information_schema views
be just direct representations of the underlying "name" catalog columns,
eliminating a semantic mismatch that was disastrous for performance of
typical queries on the information_schema. In combination with the
recent change to allow dropping no-op CoerceToDomain nodes, this allows
(for example) queries such as
select ... from information_schema.tables where table_name = 'foo';
to produce an indexscan rather than a seqscan on pg_class.
Discussion: https://postgr.es/m/CAFj8pRBUCX4LZ2rA2BbEkdD6NN59mgx+BLo1gO08Wod4RLtcTg@mail.gmail.com
information_schema output columns that are declared as being type
sql_identifier are supposed to conform to the implementation's rules
for valid identifiers, in particular the identifier length limit.
Several places potentially violated this limit by concatenating a
function's name and OID. (The OID is added to ensure name uniqueness
within a schema, since the spec doesn't expect function name overloading.)
Simply truncating the concatenation result to fit in "name" won't do,
since losing part of the OID might wind up giving non-unique results.
Instead, let's truncate the function name as necessary.
The most practical way to do that is to do it in a C function; the
information_schema.sql script doesn't have easy access to the value
of NAMEDATALEN, nor does it have an easy way to truncate on the basis
of resulting byte-length rather than number of characters.
(There are still a couple of places that cast concatenation results to
sql_identifier, but as far as I can see they are guaranteed not to produce
over-length strings, at least with the normal value of NAMEDATALEN.)
Discussion: https://postgr.es/m/23817.1545283477@sss.pgh.pa.us
For probably bogus reasons, we acquire only AccessShareLock on the
partition when we try to detach it from its parent partitioned table.
This can cause ugly things to happen if another transaction is doing
any sort of DDL to the partition concurrently.
Upgrade that lock to ShareUpdateExclusiveLock, which per discussion
seems to be the minimum needed.
Reported by Robert Haas.
Discussion: https://postgr.es/m/CA+TgmoYruJQ+2qnFLtF1xQtr71pdwgfxy3Ziy-TxV28M6pEmyA@mail.gmail.com
When a partition is detached from its parent, we acquire locks on all
attached indexes to also detach them ... but we release those locks
immediately. This is a violation of the policy of keeping locks on user
objects to the end of the transaction. Bug introduced in 8b08f7d482.
It's unclear that there are any ill effects possible, but it's clearly
wrong nonetheless. It's likely that bad behavior *is* possible, but
mostly because the relation that the index is for is only locked with
AccessShareLock, which is an older bug that shall be fixed separately.
While touching that line of code, close the index opened with
index_open() using index_close() instead of relation_close().
No difference in practice, but let's be consistent.
Unearthed by Robert Haas.
Discussion: https://postgr.es/m/CA+TgmoYruJQ+2qnFLtF1xQtr71pdwgfxy3Ziy-TxV28M6pEmyA@mail.gmail.com
The flag for IF NOT EXISTS was only being passed down in the normal
recursing case. It's been this way since originally added in 9.6 in
commit 2cd40adb85 so backpatch back to 9.6.
Now that name comparison has effectively the same behavior as text
comparison, we might as well merge the name_ops opfamily into text_ops,
allowing cross-type comparisons to be processed without forcing a
datatype coercion first. We need do little more than add cross-type
operators to make the opfamily complete, and fix one or two places
in the planner that assumed text_ops was a single-datatype opfamily.
I chose to unify hash name_ops into hash text_ops as well, since the
types have compatible hashing semantics. This allows marking the
new cross-type equality operators as oprcanhash.
(Note: this doesn't remove the name_ops opclasses, so there's no
breakage of index definitions. Those opclasses are just reparented
into the text_ops opfamily.)
Discussion: https://postgr.es/m/15938.1544377821@sss.pgh.pa.us
The "name" comparison operators now all support collations, making them
functionally equivalent to "text" comparisons, except for the different
physical representation of the datatype. They do, in fact, mostly share
the varstr_cmp and varstr_sortsupport infrastructure, which has been
slightly enlarged to handle the case.
To avoid changes in the default behavior of the datatype, set name's
typcollation to C_COLLATION_OID not DEFAULT_COLLATION_OID, so that
by default comparisons to a name value will continue to use strcmp
semantics. (This would have been the case for system catalog columns
anyway, because of commit 6b0faf723, but doing this makes it true for
user-created name columns as well. In particular, this avoids
locale-dependent changes in our regression test results.)
In consequence, tweak a couple of places that made assumptions about
collatable base types always having typcollation DEFAULT_COLLATION_OID.
I have not, however, attempted to relax the restriction that user-
defined collatable types must have that. Hence, "name" doesn't
behave quite like a user-defined type; it acts more like a domain
with COLLATE "C". (Conceivably, if we ever get rid of the need for
catalog name columns to be fixed-length, "name" could actually become
such a domain over text. But that'd be a pretty massive undertaking,
and I'm not volunteering.)
Discussion: https://postgr.es/m/15938.1544377821@sss.pgh.pa.us
Avoid repetitive calls to repalloc() when the required size of the
collector array grows more than 2x in one call. Also ensure that the
array size is a power of 2 (since palloc will probably consume a power
of 2 anyway) and doesn't start out very small (which'd likely just lead
to extra repallocs).
David Rowley, tweaked a bit by me
Discussion: https://postgr.es/m/CAKJS1f8vn-iSBE8PKeVHrnhvyjRNYCxguPFFY08QLYmjWG9hPQ@mail.gmail.com
Remove a comment from the Berkeley days claiming that nbtree must
disambiguate duplicate keys within _bt_moveright(). There is no special
care taken around duplicates within _bt_moveright(), at least since
commit 9e85183bfc removed inscrutable _bt_moveright() code to handle
pages full of duplicates.
Commit 40dae7ec53, which made the handling of interrupted nbtree page
splits more robust, removed an nbtree-specific end-of-recovery cleanup
step. This meant that it was no longer possible to complete an
interrupted page split during recovery. However, a reference to
recovery as a reason for using a NULL stack while inserting into a
parent page was missed. Remove the reference.
Remove a similar obsolete reference to recovery that was introduced much
more recently, as part of the btree fastpath optimization enhancement
that made it into Postgres 11 (commit 2b272734, and follow-up commits).
Backpatch: 11-, where the fastpath optimization was introduced.
Up to now we allowed text columns in system catalogs to use collation
"default", but that isn't really safe because it might mean something
different in template0 than it means in a database cloned from template0.
In particular, this could mean that cloned pg_statistic entries for such
columns weren't entirely valid, possibly leading to bogus planner
estimates, though (probably) not any outright failures.
In the wake of commit 5e0928005, a better solution is available: if we
label such columns with "C" collation, then their pg_statistic entries
will also use that collation and hence will be valid independently of
the database collation.
This also provides a cleaner solution for indexes on such columns than
the hack added by commit 0b28ea79c: the indexes will naturally inherit
"C" collation and don't have to be forced to use text_pattern_ops.
Also, with the planned improvement of type "name" to be collation-aware,
this policy will apply cleanly to both text and name columns.
Because of the pg_statistic angle, we should also apply this policy
to the tables in information_schema. This patch does that by adjusting
information_schema's textual domain types to specify "C" collation.
That has the user-visible effect that order-sensitive comparisons to
textual information_schema view columns will now use "C" collation
by default. The SQL standard says that the collation of those view
columns is implementation-defined, so I think this is legal per spec.
At some point this might allow for translation of such comparisons
into indexable conditions on the underlying "name" columns, although
additional work will be needed before that can happen.
Discussion: https://postgr.es/m/19346.1544895309@sss.pgh.pa.us
"rescanratio" was computed as 1 + rescanned-tuples / total-inner-tuples,
which is sensible if it's to be multiplied by total-inner-tuples or a cost
value corresponding to scanning all the inner tuples. But in reality it
was (mostly) multiplied by inner_rows or a related cost, numbers that take
into account the possibility of stopping short of scanning the whole inner
relation thanks to a limited key range in the outer relation. This'd
still make sense if we could expect that stopping short would result in a
proportional decrease in the number of tuples that have to be rescanned.
It does not, however. The argument that establishes the validity of our
estimate for that number is independent of whether we scan all of the inner
relation or stop short, and experimentation also shows that stopping short
doesn't reduce the number of rescanned tuples. So the correct calculation
is 1 + rescanned-tuples / inner_rows, and we should be sure to multiply
that by inner_rows or a corresponding cost value.
Most of the time this doesn't make much difference, but if we have
both a high rescan rate (due to lots of duplicate values) and an outer
key range much smaller than the inner key range, then the error can
be significant, leading to a large underestimate of the cost associated
with rescanning.
Per report from Vijaykumar Jain. This thinko appears to go all the way
back to the introduction of the rescan estimation logic in commit
70fba7043, so back-patch to all supported branches.
Discussion: https://postgr.es/m/CAE7uO5hMb_TZYJcZmLAgO6iD68AkEK6qCe7i=vZUkCpoKns+EQ@mail.gmail.com
When partitioned tables were introduced, we failed to realize that by
copying the tablespace handling for other relation kinds with no
physical storage we were causing the secondary effect that their
partitions would not automatically inherit the tablespace setting. This
is surprising and unhelpful, so change it to adopt the behavior
introduced in pg11 (commit 33e6c34c32) for partitioned indexes: the
parent relation remembers the tablespace specification, which is then
used for any new partitions that don't declare one.
Because this commit changes behavior of the TABLESPACE clause for
partitioned tables (it's no longer a no-op), it is not backpatched.
Author: David Rowley, Álvaro Herrera
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CAKJS1f9SxVzqDrGD1teosFd6jBMM0UEaa14_8mRvcWE19Tu0hA@mail.gmail.com
This is an oversight from recent commit b13fd344. While on it, tweak
the previous test with a better name for the renamed primary key.
Detected by buildfarm member prion which forces relation cache release
with -DRELCACHE_FORCE_RELEASE. Back-patch down to 9.4 as the previous
commit.
When a constraint gets renamed, it may have associated with it a target
relation (for example domain constraints don't have one). Not
invalidating the target relation cache when issuing the renaming can
result in issues with subsequent commands that refer to the old
constraint name using the relation cache, causing various failures. One
pattern spotted was using CREATE TABLE LIKE after a constraint
renaming.
Reported-by: Stuart <sfbarbee@gmail.com>
Author: Amit Langote
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/2047094.V130LYfLq4@station53.ousa.org
At least as far back as the 2008 spec, POSIX has defined strsignal(3)
for looking up descriptive strings for signal numbers. We hadn't gotten
the word though, and were still using the crufty old sys_siglist array,
which is in no standard even though most Unixen provide it.
Aside from not being formally standards-compliant, this was just plain
ugly because it involved #ifdef's at every place using the code.
To eliminate the #ifdef's, create a portability function pg_strsignal,
which wraps strsignal(3) if available and otherwise falls back to
sys_siglist[] if available. The set of Unixen with neither API is
probably empty these days, but on any platform with neither, you'll
just get "unrecognized signal". All extant callers print the numeric
signal number too, so no need to work harder than that.
Along the way, upgrade pg_basebackup's child-error-exit reporting
to match the rest of the system.
Discussion: https://postgr.es/m/25758.1544983503@sss.pgh.pa.us
Commit ffa4cbd62 added logic to detect SIGPIPE failure of a COPY child
process, but it only worked correctly if the SIGPIPE occurred in the
immediate child process. Depending on the shell in use and the
complexity of the shell command string, we might instead get back
an exit code of 128 + SIGPIPE, representing a shell error exit
reporting SIGPIPE in the child process.
We could just hack up ClosePipeToProgram() to add the extra case,
but it seems like this is a fairly general issue deserving a more
general and better-documented solution. I chose to add a couple
of functions in src/common/wait_error.c, which is a natural place
to know about wait-result encodings, that will test for either a
specific child-process signal type or any child-process signal failure.
Then, adjust other places that were doing ad-hoc tests of this type
to use the common functions.
In RestoreArchivedFile, this fixes a race condition affecting whether
the process will report an error or just silently proc_exit(1): before,
that depended on whether the intermediate shell got SIGTERM'd itself
or reported a child process failing on SIGTERM.
Like the previous patch, back-patch to v10; we could go further
but there seems no real need to.
Per report from Erik Rijkers.
Discussion: https://postgr.es/m/f3683f87ab1701bea5d86a7742b22432@xs4all.nl
When we first put in collations support, we basically punted on teaching
pg_statistic, ANALYZE, and the planner selectivity functions about that.
They've just used DEFAULT_COLLATION_OID independently of the actual
collation of the data. It's time to improve that, so:
* Add columns to pg_statistic that record the specific collation associated
with each statistics slot.
* Teach ANALYZE to use the column's actual collation when comparing values
for statistical purposes, and record this in the appropriate slot. (Note
that type-specific typanalyze functions are now expected to fill
stats->stacoll with the appropriate collation, too.)
* Teach assorted selectivity functions to use the actual collation of
the stats they are looking at, instead of just assuming it's
DEFAULT_COLLATION_OID.
This should give noticeably better results in selectivity estimates for
columns with nondefault collations, at least for query clauses that use
that same collation (which would be the default behavior in most cases).
It's still true that comparisons with explicit COLLATE clauses different
from the stored data's collation won't be well-estimated, but that's no
worse than before. Also, this patch does make the first step towards
doing better with that, which is that it's now theoretically possible to
collect stats for a collation other than the column's own collation.
Patch by me; thanks to Peter Eisentraut for review.
Discussion: https://postgr.es/m/14706.1544630227@sss.pgh.pa.us
The cache lookup routines for foreign-data wrappers and foreign servers
are extended with an extra argument to handle a set of flags. The only
value which can be used now is to indicate if a missing object should
result in an error or not, and are designed to be extensible on need.
Those new routines are added into the existing set of user-visible
FDW APIs and documented in consequence. They will be used for future
patches to improve the SQL interface for object addresses.
Author: Michael Paquier
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/CAB7nPqSZxrSmdHK-rny7z8mi=EAFXJ5J-0RbzDw6aus=wB5azQ@mail.gmail.com
The changes I made in 578b229718 assigned oids below
FirstBootstrapObjectId to objects in include/catalog/*.dat files that
did not have an oid assigned, starting at the max oid explicitly
assigned. Tom criticized that for mainly two reasons:
1) It's not clear which values are manually and which explicitly
assigned.
2) The space below FirstBootstrapObjectId gets pretty crowded, and
some PostgreSQL forks have used oids >= 9000 for their own objects,
to avoid conflicting.
Thus create a new range for objects not assigned explicit oids, but
assigned by genbki.pl. For now 1-9999 is for explicitly assigned oids,
FirstGenbkiObjectId (10000) to FirstBootstrapObjectId (1200) -1 is for
genbki.pl assigned oids, and < FirstNormalObjectId (16384) is for oids
assigned during bootstrap. It's possible that we'll have to adjust
these boundaries, but there's some headroom for now.
Add a note suggesting that oids in forks should be assigned in the
9000-9999 range.
Catversion bump for obvious reasons.
Per complaint from Tom Lane.
Author: Andres Freund
Discussion: https://postgr.es/m/16845.1544393682@sss.pgh.pa.us
The idea here is to not call recordDependencyOn for the default collation,
since we know that's pinned. But what the code actually did was to record
the partition key's dependency on the opclass twice, instead.
Evidently introduced by sloppy coding in commit 2186b608b. Back-patch
to v10 where that came in.
If a domain has no constraints, then CoerceToDomain doesn't really do
anything and can be simplified to a RelabelType. This not only
eliminates cycles at execution, but allows the planner to optimize better
(for instance, match the coerced expression to an index on the underlying
column). However, we do have to support invalidating the plan later if
a constraint gets added to the domain. That's comparable to the case of
a change to a SQL function that had been inlined into a plan, so all the
necessary logic already exists for plans depending on functions. We
need only duplicate or share that logic for domains.
ALTER DOMAIN ADD/DROP CONSTRAINT need to be taught to send out sinval
messages for the domain's pg_type entry, since those operations don't
update that row. (ALTER DOMAIN SET/DROP NOT NULL do update that row,
so no code change is needed for them.)
Testing this revealed what's really a pre-existing bug in plpgsql:
it caches the SQL-expression-tree expansion of type coercions and
had no provision for invalidating entries in that cache. Up to now
that was only a problem if such an expression had inlined a SQL
function that got changed, which is unlikely though not impossible.
But failing to track changes of domain constraints breaks an existing
regression test case and would likely cause practical problems too.
We could fix that locally in plpgsql, but what seems like a better
idea is to build some generic infrastructure in plancache.c to store
standalone expressions and track invalidation events for them.
(It's tempting to wonder whether plpgsql's "simple expression" stuff
could use this code with lower overhead than its current use of the
heavyweight plancache APIs. But I've left that idea for later.)
Other stuff fixed in passing:
* Allow estimate_expression_value() to drop CoerceToDomain
unconditionally, effectively assuming that the coercion will succeed.
This will improve planner selectivity estimates for cases involving
estimatable expressions that are coerced to domains. We could have
done this independently of everything else here, but there wasn't
previously any need for eval_const_expressions_mutator to know about
CoerceToDomain at all.
* Use a dlist for plancache.c's list of cached plans, rather than a
manually threaded singly-linked list. That eliminates a potential
performance problem in DropCachedPlan.
* Fix a couple of inconsistencies in typecmds.c about whether
operations on domains drop RowExclusiveLock on pg_type. Our common
practice is that DDL operations do drop catalog locks, so standardize
on that choice.
Discussion: https://postgr.es/m/19958.1544122124@sss.pgh.pa.us
When GIN vacuum deletes a posting tree page, it assumes that no concurrent
searchers can access it, thanks to ginStepRight() locking two pages at once.
However, since 9.4 searches can skip parts of posting trees descending from the
root. That leads to the risk that page is deleted and reclaimed before
concurrent search can access it.
This commit prevents the risk of above by waiting for every transaction, which
might wait to reference this page, to finish. Due to binary compatibility
we can't change GinPageOpaqueData to store corresponding transaction id.
Instead we reuse page header pd_prune_xid field, which is unused in index pages.
Discussion: https://postgr.es/m/31a702a.14dd.166c1366ac1.Coremail.chjischj%40163.com
Author: Andrey Borodin, Alexander Korotkov
Reviewed-by: Alexander Korotkov
Backpatch-through: 9.4
On standby ginRedoDeletePage() can work concurrently with read-only queries.
Those queries can traverse posting tree in two ways.
1) Using rightlinks by ginStepRight(), which locks the next page before
unlocking its left sibling.
2) Using downlinks by ginFindLeafPage(), which locks at most one page at time.
Original lock order was: page, parent, left sibling. That lock order can
deadlock with ginStepRight(). In order to prevent deadlock this commit changes
lock order to: left sibling, page, parent. Note, that position of parent in
locking order seems insignificant, because we only lock one page at time while
traversing downlinks.
Reported-by: Chen Huajun
Diagnosed-by: Chen Huajun, Peter Geoghegan, Andrey Borodin
Discussion: https://postgr.es/m/31a702a.14dd.166c1366ac1.Coremail.chjischj%40163.com
Author: Alexander Korotkov
Backpatch-through: 9.4
Before 218f51584d if posting tree page is about to be deleted, then the whole
posting tree is locked by LockBufferForCleanup() on root preventing all the
concurrent inserts. 218f51584d reduced locking to the subtree containing
page to be deleted. However, due to concurrent parent split, inserter doesn't
always holds pins on all the pages constituting path from root to the target
leaf page. That could cause a deadlock between GIN vacuum process and GIN
inserter. And we didn't find non-invasive way to fix this.
This commit reverts VACUUM behavior to lock the whole posting tree before
delete any page. However, we keep another useful change by 218f51584d5: the
tree is locked only if there are pages to be deleted.
Reported-by: Chen Huajun
Diagnosed-by: Chen Huajun, Andrey Borodin, Peter Geoghegan
Discussion: https://postgr.es/m/31a702a.14dd.166c1366ac1.Coremail.chjischj%40163.com
Author: Alexander Korotkov, based on ideas from Andrey Borodin and Peter Geoghegan
Reviewed-by: Andrey Borodin
Backpatch-through: 10
postgres_fdw's postgresGetForeignPlan() assumes without checking that the
outer_plan it's given for a join relation must have a NestLoop, MergeJoin,
or HashJoin node at the top. That's been wrong at least since commit
4bbf6edfb (which could cause insertion of a Sort node on top) and it seems
like a pretty unsafe thing to Just Assume even without that.
Through blind good fortune, this doesn't seem to have any worse
consequences today than strange EXPLAIN output, but it's clearly trouble
waiting to happen.
To fix, test the node type explicitly before touching Join-specific
fields, and avoid jamming the new tlist into a node type that can't
do projection. Export a new support function from createplan.c
to avoid building low-level knowledge about the latter into FDWs.
Back-patch to 9.6 where the faulty coding was added. Note that the
associated regression test cases don't show any changes before v11,
apparently because the tests back-patched with 4bbf6edfb don't actually
exercise the problem case before then (there's no top-level Sort
in those plans).
Discussion: https://postgr.es/m/8946.1544644803@sss.pgh.pa.us
Our support for multiple-set-clauses in UPDATE assumes that the Params
referencing a MULTIEXPR_SUBLINK SubPlan will appear before that SubPlan
in the targetlist of the plan node that calculates the updated row.
(Yeah, it's a hack...) In some PG branches it's possible that a Result
node gets inserted between the primary calculation of the update tlist
and the ModifyTable node. setrefs.c did the wrong thing in this case
and left the upper-level Params as Params, causing a crash at runtime.
What it should do is replace them with "outer" Vars referencing the child
plan node's output. That's a result of careless ordering of operations
in fix_upper_expr_mutator, so we can fix it just by reordering the code.
Fix fix_join_expr_mutator similarly for consistency, even though join
nodes could never appear in such a context. (In general, it seems
likely to be a bit cheaper to use Vars than Params in such situations
anyway, so this patch might offer a tiny performance improvement.)
The hazard extends back to 9.5 where the MULTIEXPR_SUBLINK stuff
was introduced, so back-patch that far. However, this may be a live
bug only in 9.6.x and 10.x, as the other branches don't seem to want
to calculate the final tlist below the Result node. (That plan shape
change between branches might be a mini-bug in itself, but I'm not
really interested in digging into the reasons for that right now.
Still, add a regression test memorializing what we expect there,
so we'll notice if it changes again.)
Per bug report from Eduards Bezverhijs.
Discussion: https://postgr.es/m/b6cd572a-3e44-8785-75e9-c512a5a17a73@tieto.com
This fixes a crash which happened when calling the function directly
with a relation OID referring to a non-existing object, and changes the
behavior so as NULL is returned for unsupported relkinds instead of
generating an error. This puts the new function in line with many other
system functions, and eases actions like full scans of pg_class.
Author: Michael Paquier
Reviewed-by: Amit Langote, Stephen Frost
Discussion: https://postgr.es/m/20181207010406.GO2407@paquier.xyz
Although copyfuncs.c has a check_stack_depth call in its recursion,
equalfuncs.c, outfuncs.c, and readfuncs.c lacked one. This seems
unwise.
Likewise fix planstate_tree_walker(), in branches where that exists.
Discussion: https://postgr.es/m/30253.1544286631@sss.pgh.pa.us
Previously, it would just pass back a partially-uninitialized tupdesc,
which doesn't seem like a safe or useful behavior.
Backpatch to v10 where this code came in.
Discussion: https://postgr.es/m/30830.1544384975@sss.pgh.pa.us
In toast_fetch_datum_slice(), we Assert() that what is passed in isn't
compressed, but we then later had a check to see what the length of if
what was passed in is compressed. That later check is rather confusing
since toast_fetch_datum_slice() is only ever called with non-compressed
datums and the Assert() earlier makes it clear that one shouldn't be
passing in compressed datums.
Add a comment to make it clear that toast_fetch_datum_slice() is just
for non-compressed datums, and remove the dead code.
When a WAL segment is recycled, its ".ready" and ".done" status files
get also automatically removed, however this is not done in a durable
manner. Hence, in a subsequent crash, it could be possible that a
".ready" status file is still around with its corresponding segment
already gone.
If the backend reaches such a state, the archive command would most
likely complain about a segment non-existing and would keep retrying,
causing WAL segments to bloat pg_wal/, potentially making Postgres crash
hard when running out of space.
As status files are removed after each individual segment, using
durable_unlink() does not completely close the window either, as a crash
could happen between the moment the WAL segment is recycled and the
moment its status files are removed. This has also some performance
impact with the additional fsync() calls needed to make the removal in a
durable manner. Doing the cleanup at recovery is not cost-free either
as this makes crash recovery potentially take longer than necessary.
So, instead, as per an idea of Stephen Frost, make the archiver aware of
orphan status files and remove them on-the-fly if the corresponding
segment goes missing. Removal failures follow a model close to what
happens for WAL segments, where multiple attempts are done before giving
up temporarily, and where a successful orphan removal makes the archiver
move immediately to the next WAL segment thought as ready to be
archived.
Author: Michael Paquier
Reviewed-by: Nathan Bossart, Andres Freund, Stephen Frost, Kyotaro
Horiguchi
Discussion: https://postgr.es/m/20180928032827.GF1500@paquier.xyz
The timestamp generated by the standby at message transmission has been
included in the protocol since its introduction for both the status
update message and hot standby feedback message, but it has never
appeared in pg_stat_replication. Seeing this timestamp does not matter
much with a cluster which has a lot of activity, but on a mostly-idle
cluster, this makes monitoring able to react faster than the configured
timeouts.
Author: MyungKyu LIM
Reviewed-by: Michael Paquier, Masahiko Sawada
Discussion: https://postgr.es/m/1657809367.407321.1533027417725.JavaMail.jboss@ep2ml404
The stanza of ExecuteTruncate[Guts] that truncates a target table's toast
relation re-used the loop local variable "rel" to reference the toast rel.
This was safe enough when written, but commit d42358efb added code below
that that supposed "rel" still pointed to the parent table. Therefore,
the stats counter update was applied to the wrong relcache entry (the
toast rel not the user rel); and if we were unlucky and that relcache
entry had been flushed during reindex_relation, very bad things could
ensue.
(I'm surprised that CLOBBER_CACHE_ALWAYS testing hasn't found this.
I'm even more surprised that the problem wasn't detected during the
development of d42358efb; it must not have been tested in any case
with a toast table, as the incorrect stats counts are very obvious.)
To fix, replace use of "rel" in that code branch with a more local
variable. Adjust test cases added by d42358efb so that some of them
use tables with toast tables.
Per bug #15540 from Pan Bian. Back-patch to 9.5 where d42358efb came in.
Discussion: https://postgr.es/m/15540-01078812338195c0@postgresql.org
Remove dead code (which would be incorrect if it weren't dead),
per report from Pan Bian. Add a CHECK_FOR_INTERRUPTS in the
inner loop over child relations, because there's little point
in having one in the outer loop if there's not one here too.
Minor stylistic adjustments and comment improvements.
Seems to be aboriginal to this code (cf commit 665d1fad9).
Back-patch to v10 where that came in, not because any of this
is significant, but just to keep the branches looking similar.
Discussion: https://postgr.es/m/15539-06d00ef6b1e2e1bb@postgresql.org
As per the error message style guide of the documentation, those should
be full sentences.
Author: Daniel Gustafsson
Reviewed-by: Michael Paquier, Álvaro Herrera
Discussion: https://1E8D49B4-16BC-4420-B4ED-58501D9E076B@yesql.se
Places that are testing for *printf failure ought to include the format
string in their error reports, since bad-format-string is one of the
more likely causes of such failure. This both makes it easier to find
and repair the mistake, and provides at least some useful info to the
user who stumbles across such a problem.
Also, tighten snprintf.c to report EINVAL for an invalid flag or
final character in a format %-spec (including the case where the
%-spec is missing a final character altogether). This seems like
better project policy, and it also allows removing an instruction
or two from the hot code path.
Back-patch the error reporting change in pvsnprintf, since it should be
harmless and may be helpful; but not the snprintf.c change.
Per discussion of bug #15511 from Ertuğrul Kahveci, which reported an
invalid translated format string. These changes don't fix that error,
but they should improve matters next time we make such a mistake.
Discussion: https://postgr.es/m/15511-1d8b6a0bc874112f@postgresql.org
Skipping over the "hole" in full page images in the XLOG code was
described as being a form of compression, but this got a bit confusing
since we now have PGLZ-based compression happening, so adjust the
wording to discuss "removing" the "hole" and keeping the talk about
compression to where we're talking about using PGLZ-based compression of
the full page images.
Reviewed-By: Kyotaro Horiguchi
Discussion: https://postgr.es/m/20181127234341.GM3415@tamriel.snowman.net
When an indexes is created on a partitioned table using ONLY (don't
recurse to partitions), it gets marked invalid until index partitions
are attached for each table partition. But there's no reason to do this
if there are no partitions ... and moreover, there's no way to get the
index to become valid afterwards, because all partitions that get
created/attached get their own index partition already attached to the
parent index, so there's no chance to do ALTER INDEX ... ATTACH PARTITION
that would make the parent index valid.
Fix by not marking the index as invalid to begin with.
This is very similar to 9139aa1942, but the pg_dump aspect does not
appear to be relevant until we add FKs that can point to PKs on
partitioned tables. (I tried to cause the pg_upgrade test to break by
leaving some of these bogus tables around, but wasn't able to.)
Making this change means that an index that was supposed to be invalid
in the insert_conflict regression test is no longer invalid; reorder the
DDL so that the test continues to verify the behavior we want it to.
Author: Álvaro Herrera
Reviewed-by: Amit Langote
Discussion: https://postgr.es/m/20181203225019.2vvdef2ybnkxt364@alvherre.pgsql
This does not improve the security and reliability of the touched areas,
but it makes the style more consistent.
Author: Michael Paquier
Reviewed-by- Noah Misch
Discussion: https://postgr.es/m/20180309075538.GD9376@paquier.xyz
Three issues are fixed in this patch:
- Base backups forgot to ignore files specific to EXEC_BACKEND, leading
to spurious warnings when checksums are enabled, per analysis from me.
- pg_verify_checksums forgot about files specific to EXEC_BACKEND,
leading to failures of the tool on any such build, particularly Windows.
This error was originally found by newly-introduced TAP tests in various
buildfarm members using EXEC_BACKEND.
- pg_verify_checksums forgot to count for temporary files and temporary
paths, which could be valid relation files, without checksums, per
report from Andres Freund. More tests are added to cover this case.
A new test case which emulates corruption for a file in a different
tablespace is added, coming from from Michael Banck, while I have coded
the main code and refactored the test code.
Author: Michael Banck, Michael Paquier
Reviewed-by: Stephen Frost, David Steele
Discussion: https://postgr.es/m/20181021134206.GA14282@paquier.xyz
This allows to set a lower log_min_duration_statement value without
incurring excessive log traffic (which reduces performance). This can
be useful to analyze workloads with lots of short queries.
Author: Adrien Nayrat
Reviewed-by: David Rowley, Vik Fearing
Discussion: https://postgr.es/m/c30ee535-ee1e-db9f-fa97-146b9f62caed@anayrat.info
This fixes an oversight from c6c3334 which forgot that if a subset of
WAL senders are stopping and in a sync state, other WAL senders could
still be waiting for a WAL position to be synced while committing a
transaction. However the subset of stopping senders would not release
waiters, potentially breaking synchronous replication guarantees. This
commit makes sure that even WAL senders stopping are able to release
waiters and are tracked properly.
On 9.4, this can also trigger an assertion failure when setting for
example max_wal_senders to 1 where a WAL sender is not able to find
itself as in synchronous state when the instance stops.
Reported-by: Paul Guo
Author: Paul Guo, Michael Paquier
Discussion: https://postgr.es/m/CAEET0ZEv8VFqT3C-cQm6byOB4r4VYWcef1J21dOX-gcVhCSpmA@mail.gmail.com
Backpatch-through: 9.4
Move the responsibility for checking for and reporting a failure from
the only current BufFileSize() caller, logtape.c, to BufFileSize()
itself. Code within buffile.c is generally responsible for interfacing
with fd.c to report irrecoverable failures. This seems like a
convention that's worth sticking to.
Reorganizing things this way makes it easy to make the error message
raised in the event of BufFileSize() failure descriptive of the
underlying problem. We're now clear on the distinction between
temporary file name and BufFile name, and can show errno, confident that
its value actually relates to the error being reported. In passing, an
existing, similar buffile.c ereport() + errcode_for_file_access() site
is changed to follow the same conventions.
The API of the function BufFileSize() is changed by this commit, despite
already being in a stable release (Postgres 11). This seems acceptable,
since the BufFileSize() ABI was changed by commit aa55183042, which
hasn't made it into a point release yet. Besides, it's difficult to
imagine a third party BufFileSize() caller not just raising an error
anyway, since BufFile state should be considered corrupt when
BufFileSize() fails.
Per complaint from Tom Lane.
Discussion: https://postgr.es/m/26974.1540826748@sss.pgh.pa.us
Backpatch: 11-, where shared BufFiles were introduced.
The previous recovery.conf regime accepted multiple recovery_target*
settings and used the last one. This does not translate well to the
general GUC system. Specifically, under EXEC_BACKEND, the settings
are written out not in any particular order, so the order in which
they were originally set is not available to new processes.
Rather than redesign the GUC system, it was decided to abandon the old
behavior and only allow one recovery target setting. A second setting
will cause an error. However, it is allowed to set the same parameter
multiple times or unset a parameter and set a different one.
Discussion: https://www.postgresql.org/message-id/flat/27802171543235530%40iva2-6ec8f0a6115e.qloud-c.yandex.net#701a59c837ad0bf8c244344aaf3ef5a4
Since commit 2f1d2b7a we have set PAM_RHOST to "[local]" for Unix
sockets. This caused Linux PAM's libaudit integration to make DNS
requests for that name. It's not exactly clear what value PAM_RHOST
should have in that case, but it seems clear that we shouldn't set it
to an unresolvable name, so don't do that.
Back-patch to 9.6. Bug #15520.
Author: Thomas Munro
Reviewed-by: Peter Eisentraut
Reported-by: Albert Schabhuetl
Discussion: https://postgr.es/m/15520-4c266f986998e1c5%40postgresql.org
During table rewrites (VACUUM FULL and CLUSTER), the main heap is logged
using XLOG / FPI records, and thus (correctly) ignored in decoding.
But the associated TOAST table is WAL-logged as plain INSERT records,
and so was logically decoded and passed to reorder buffer.
That has severe consequences with TOAST tables of non-trivial size.
Firstly, reorder buffer has to keep all those changes, possibly spilling
them to a file, incurring I/O costs and disk space.
Secondly, ReoderBufferCommit() was stashing all those TOAST chunks into
a hash table, which got discarded only after processing the row from the
main heap. But as the main heap is not decoded for rewrites, this never
happened, so all the TOAST data accumulated in memory, resulting either
in excessive memory consumption or OOM.
The fix is simple, as commit e9edc1ba already introduced infrastructure
(namely HEAP_INSERT_NO_LOGICAL flag) to skip logical decoding of TOAST
tables, but it only applied it to system tables. So simply use it for
all TOAST data in raw_heap_insert().
That would however solve only the memory consumption issue - the TOAST
changes would still be decoded and added to the reorder buffer, and
spilled to disk (although without TOAST tuple data, so much smaller).
But we can solve that by tweaking DecodeInsert() to just ignore such
INSERT records altogether, using XLH_INSERT_CONTAINS_NEW_TUPLE flag,
instead of skipping them later in ReorderBufferCommit().
Review: Masahiko Sawada
Discussion: https://www.postgresql.org/message-id/flat/1a17c643-e9af-3dba-486b-fbe31bc1823a%402ndquadrant.com
Backpatch: 9.4-, where logical decoding was introduced
If you extend a relation, it should count as a block written, not
read (we write a zero-filled block). If you ask for a zero-filled
buffer, it shouldn't be counted as read or written.
Later we might consider counting zero-filled buffers with a separate
counter, if they become more common due to future work.
Author: Thomas Munro
Reviewed-by: Haribabu Kommi, Kyotaro Horiguchi, David Rowley
Discussion: https://postgr.es/m/CAEepm%3D3JytB3KPpvSwXzkY%2Bdwc5zC8P8Lk7Nedkoci81_0E9rA%40mail.gmail.com
The function generated to perform JIT compiled tuple deforming failed
when HeapTupleHeader's t_hoff was bigger than a signed int8. I'd
failed to realize that LLVM's getelementptr would treat an int8 index
argument as signed, rather than unsigned. That means that a hoff
larger than 127 would result in a negative offset being applied. Fix
that by widening the index to 32bit.
Add a testcase with a wide table. Don't drop it, as it seems useful to
verify other tools deal properly with wide tables.
Thanks to Justin Pryzby for both reporting a bug and then reducing it
to a reproducible testcase!
Reported-By: Justin Pryzby
Author: Andres Freund
Discussion: https://postgr.es/m/20181115223959.GB10913@telsasoft.com
Backpatch: 11, just as jit compilation was
recovery.conf settings are now set in postgresql.conf (or other GUC
sources). Currently, all the affected settings are PGC_POSTMASTER;
this could be refined in the future case by case.
Recovery is now initiated by a file recovery.signal. Standby mode is
initiated by a file standby.signal. The standby_mode setting is
gone. If a recovery.conf file is found, an error is issued.
The trigger_file setting has been renamed to promote_trigger_file as
part of the move.
The documentation chapter "Recovery Configuration" has been integrated
into "Server Configuration".
pg_basebackup -R now appends settings to postgresql.auto.conf and
creates a standby.signal file.
Author: Fujii Masao <masao.fujii@gmail.com>
Author: Simon Riggs <simon@2ndquadrant.com>
Author: Abhijit Menon-Sen <ams@2ndquadrant.com>
Author: Sergei Kornilov <sk@zsrv.org>
Discussion: https://www.postgresql.org/message-id/flat/607741529606767@web3g.yandex.ru/
Commit cfdf4dc4 added an assertion that every WaitLatch() or similar
handles postmaster death. One place did not, but was missed in
review and testing due to the need for an SSL connection. Fix, by
asking for WL_EXIT_ON_PM_DEATH.
Reported-by: Christoph Berg
Discussion: https://postgr.es/m/20181124143845.GA15039%40msg.df7cb.de
ftoi4 and its sibling coercion functions did their overflow checks in
a way that looked superficially plausible, but actually depended on an
assumption that the MIN and MAX comparison constants can be represented
exactly in the float4 or float8 domain. That fails in ftoi4, ftoi8,
and dtoi8, resulting in a possibility that values near the MAX limit will
be wrongly converted (to negative values) when they need to be rejected.
Also, because we compared before rounding off the fractional part,
the other three functions threw errors for values that really ought
to get rounded to the min or max integer value.
Fix by doing rint() first (requiring an assumption that it handles
NaN and Inf correctly; but dtoi8 and ftoi8 were assuming that already),
and by comparing to values that should coerce to float exactly, namely
INTxx_MIN and -INTxx_MIN. Also remove some random cosmetic discrepancies
between these six functions.
Per bug #15519 from Victor Petrovykh. This should get back-patched,
but first let's see what the buildfarm thinks of it --- I'm not too
sure about portability of some of the regression test cases.
Patch by me; thanks to Andrew Gierth for analysis and discussion.
Discussion: https://postgr.es/m/15519-4fc785b483201ff1@postgresql.org
We should never estimate the output of a semijoin to be more rows than
we estimate for an inner join with the same input rels and join condition;
it's obviously impossible for that to happen. However, given the
relatively poor quality of our semijoin selectivity estimates ---
particularly, but not only, in cases where we punt and return a default
estimate --- we did often deliver such estimates. To improve matters,
calculate both estimates inside eqjoinsel() and take the smaller one.
The bulk of this patch is just mechanical refactoring to avoid repetitive
information lookup when we call both eqjoinsel_semi and eqjoinsel_inner.
The actual new behavior is just
selec = Min(selec, inner_rel->rows * selec_inner);
which looks a bit odd but is correct because of our different definitions
for inner and semi join selectivity.
There is one ensuing plan change in the regression tests, but it looks
reasonable enough (and checking the actual row counts shows that the
estimate moved closer to reality, not further away).
Per bug #15160 from Alexey Ermakov. Although this is arguably a bug fix,
I won't risk destabilizing plan choices in stable branches by
back-patching.
Tom Lane, reviewed by Melanie Plageman
Discussion: https://postgr.es/m/152395805004.19366.3107109716821067806@wrigleys.postgresql.org
Users of the WaitEventSet and WaitLatch() APIs can now choose between
asking for WL_POSTMASTER_DEATH and then handling it explicitly, or asking
for WL_EXIT_ON_PM_DEATH to trigger immediate exit on postmaster death.
This reduces code duplication, since almost all callers want the latter.
Repair all code that was previously ignoring postmaster death completely,
or requesting the event but ignoring it, or requesting the event but then
doing an unconditional PostmasterIsAlive() call every time through its
event loop (which is an expensive syscall on platforms for which we don't
have USE_POSTMASTER_DEATH_SIGNAL support).
Assert that callers of WaitLatchXXX() under the postmaster remember to
ask for either WL_POSTMASTER_DEATH or WL_EXIT_ON_PM_DEATH, to prevent
future bugs.
The only process that doesn't handle postmaster death is syslogger. It
waits until all backends holding the write end of the syslog pipe
(including the postmaster) have closed it by exiting, to be sure to
capture any parting messages. By using the WaitEventSet API directly
it avoids the new assertion, and as a by-product it may be slightly
more efficient on platforms that have epoll().
Author: Thomas Munro
Reviewed-by: Kyotaro Horiguchi, Heikki Linnakangas, Tom Lane
Discussion: https://postgr.es/m/CAEepm%3D1TCviRykkUb69ppWLr_V697rzd1j3eZsRMmbXvETfqbQ%40mail.gmail.com,
https://postgr.es/m/CAEepm=2LqHzizbe7muD7-2yHUbTOoF7Q+qkSD5Q41kuhttRTwA@mail.gmail.com
populate_recordset_worker() failed to consider the possibility that the
supplied JSON data contains no rows, so that update_cached_tupdesc never
got called. This led to a null-pointer dereference since commit 9a5e8ed28;
before that it led to a bogus "set-valued function called in context that
cannot accept a set" error. Fix by forcing the update to happen.
Per bug #15514. Back-patch to v11 as 9a5e8ed28 was. (If we were excited
about the bogus error, we could perhaps go back further, but it'd take more
work to figure out how to fix it in older branches. Given the lack of
field complaints about that aspect, I'm not excited.)
Discussion: https://postgr.es/m/15514-59d5b4c4065b178b@postgresql.org
Previously tables declared WITH OIDS, including a significant fraction
of the catalog tables, stored the oid column not as a normal column,
but as part of the tuple header.
This special column was not shown by default, which was somewhat odd,
as it's often (consider e.g. pg_class.oid) one of the more important
parts of a row. Neither pg_dump nor COPY included the contents of the
oid column by default.
The fact that the oid column was not an ordinary column necessitated a
significant amount of special case code to support oid columns. That
already was painful for the existing, but upcoming work aiming to make
table storage pluggable, would have required expanding and duplicating
that "specialness" significantly.
WITH OIDS has been deprecated since 2005 (commit ff02d0a05280e0).
Remove it.
Removing includes:
- CREATE TABLE and ALTER TABLE syntax for declaring the table to be
WITH OIDS has been removed (WITH (oids[ = true]) will error out)
- pg_dump does not support dumping tables declared WITH OIDS and will
issue a warning when dumping one (and ignore the oid column).
- restoring an pg_dump archive with pg_restore will warn when
restoring a table with oid contents (and ignore the oid column)
- COPY will refuse to load binary dump that includes oids.
- pg_upgrade will error out when encountering tables declared WITH
OIDS, they have to be altered to remove the oid column first.
- Functionality to access the oid of the last inserted row (like
plpgsql's RESULT_OID, spi's SPI_lastoid, ...) has been removed.
The syntax for declaring a table WITHOUT OIDS (or WITH (oids = false)
for CREATE TABLE) is still supported. While that requires a bit of
support code, it seems unnecessary to break applications / dumps that
do not use oids, and are explicit about not using them.
The biggest user of WITH OID columns was postgres' catalog. This
commit changes all 'magic' oid columns to be columns that are normally
declared and stored. To reduce unnecessary query breakage all the
newly added columns are still named 'oid', even if a table's column
naming scheme would indicate 'reloid' or such. This obviously
requires adapting a lot code, mostly replacing oid access via
HeapTupleGetOid() with access to the underlying Form_pg_*->oid column.
The bootstrap process now assigns oids for all oid columns in
genbki.pl that do not have an explicit value (starting at the largest
oid previously used), only oids assigned later by oids will be above
FirstBootstrapObjectId. As the oid column now is a normal column the
special bootstrap syntax for oids has been removed.
Oids are not automatically assigned during insertion anymore, all
backend code explicitly assigns oids with GetNewOidWithIndex(). For
the rare case that insertions into the catalog via SQL are called for
the new pg_nextoid() function can be used (which only works on catalog
tables).
The fact that oid columns on system tables are now normal columns
means that they will be included in the set of columns expanded
by * (i.e. SELECT * FROM pg_class will now include the table's oid,
previously it did not). It'd not technically be hard to hide oid
column by default, but that'd mean confusing behavior would either
have to be carried forward forever, or it'd cause breakage down the
line.
While it's not unlikely that further adjustments are needed, the
scope/invasiveness of the patch makes it worthwhile to get merge this
now. It's painful to maintain externally, too complicated to commit
after the code code freeze, and a dependency of a number of other
patches.
Catversion bump, for obvious reasons.
Author: Andres Freund, with contributions by John Naylor
Discussion: https://postgr.es/m/20180930034810.ywp2c7awz7opzcfr@alap3.anarazel.de
As already explained in configure.in, using the OpenSSL version number
to detect presence of functions doesn't work, because LibreSSL reports
incompatible version numbers. Fortunately, the functions we need here
are actually macros, so we can just test for them directly.
Per POSIX, WIFSIGNALED and related macros are provided by <sys/wait.h>.
Apparently on Linux they're also pulled in by some other inclusions,
but BSD-ish systems are pickier. Fixes portability issue in ffa4cbd62.
Per buildfarm.
Previously, any program launched by COPY TO/FROM PROGRAM inherited the
server's setting of SIGPIPE handling, i.e. SIG_IGN. Hence, if we were
doing COPY FROM PROGRAM and closed the pipe early, the child process
would see EPIPE on its output file and typically would treat that as
a fatal error, in turn causing the COPY to report error. Similarly,
one could get a failure report from a query that didn't read all of
the output from a contrib/file_fdw foreign table that uses file_fdw's
PROGRAM option.
To fix, ensure that child programs inherit SIG_DFL not SIG_IGN processing
of SIGPIPE. This seems like an all-around better situation since if
the called program wants some non-default treatment of SIGPIPE, it would
expect to have to set that up for itself. Then in COPY, if it's COPY
FROM PROGRAM and we stop reading short of detecting EOF, treat a SIGPIPE
exit from the called program as a non-error condition. This still allows
us to report an error for any case where the called program gets SIGPIPE
on some other file descriptor.
As coded, we won't report a SIGPIPE if we stop reading as a result of
seeing an in-band EOF marker (e.g. COPY BINARY EOF marker). It's
somewhat debatable whether we should complain if the called program
continues to transmit data after an EOF marker. However, it seems like
we should avoid throwing error in any questionable cases, especially in a
back-patched fix, and anyway it would take additional code to make such
an error get reported consistently.
Back-patch to v10. We could go further back, since COPY FROM PROGRAM
has been around awhile, but AFAICS the only way to reach this situation
using core or contrib is via file_fdw, which has only supported PROGRAM
sources since v10. The COPY statement per se has no feature whereby
it'd stop reading without having hit EOF or an error already. Therefore,
I don't see any upside to back-patching further that'd outweigh the
risk of complaints about behavioral change.
Per bug #15449 from Eric Cyr.
Patch by me, review by Etsuro Fujita and Kyotaro Horiguchi
Discussion: https://postgr.es/m/15449-1cf737dd5929450e@postgresql.org
The 'partoids' list which was constructed by the previous version
of this code was necessarily identical to 'inhoids'. There's no
point to duplicating the list, so avoid that. Instead, construct
the array representation directly from the original 'inhoids' list.
Also, use an array rather than a list for 'boundspecs'. We know
exactly how many items we need to store, so there's really no
reason to use a list. Using an array instead reduces the number
of memory allocations we perform.
Patch by me, reviewed by Michael Paquier and Amit Langote, the
latter of whom also helped with rebasing.
This didn't actually work: COPY would fail to flush the right files, and
instead would try to flush a non-existing file, causing the whole
transaction to fail.
Cope by raising an error as soon as the command is sent instead, to
avoid a nasty later surprise. Of course, it would be much better to
make it work, but we don't have a patch for that yet, and we don't know
if we'll want to backpatch one when we do.
Reported-by: Tomas Vondra
Author: David Rowley
Reviewed-by: Amit Langote, Steve Singer, Tomas Vondra
On some operating systems, it doesn't make sense to retry fsync(),
because dirty data cached by the kernel may have been dropped on
write-back failure. In that case the only remaining copy of the
data is in the WAL. A subsequent fsync() could appear to succeed,
but not have flushed the data. That means that a future checkpoint
could apparently complete successfully but have lost data.
Therefore, violently prevent any future checkpoint attempts by
panicking on the first fsync() failure. Note that we already
did the same for WAL data; this change extends that behavior to
non-temporary data files.
Provide a GUC data_sync_retry to control this new behavior, for
users of operating systems that don't eject dirty data, and possibly
forensic/testing uses. If it is set to on and the write-back error
was transient, a later checkpoint might genuinely succeed (on a
system that does not throw away buffers on failure); if the error is
permanent, later checkpoints will continue to fail. The GUC defaults
to off, meaning that we panic.
Back-patch to all supported releases.
There is still a narrow window for error-loss on some operating
systems: if the file is closed and later reopened and a write-back
error occurs in the intervening time, but the inode has the bad
luck to be evicted due to memory pressure before we reopen, we could
miss the error. A later patch will address that with a scheme
for keeping files with dirty data open at all times, but we judge
that to be too complicated to back-patch.
Author: Craig Ringer, with some adjustments by Thomas Munro
Reported-by: Craig Ringer
Reviewed-by: Robert Haas, Thomas Munro, Andres Freund
Discussion: https://postgr.es/m/20180427222842.in2e4mibx45zdth5%40alap3.anarazel.de
If fsync() fails, md.c must keep the request in its bitmap, so that
future attempts will try again.
Back-patch to all supported releases.
Author: Thomas Munro
Reviewed-by: Amit Kapila
Reported-by: Andrew Gierth
Discussion: https://postgr.es/m/87y3i1ia4w.fsf%40news-spur.riddles.org.uk
When reading a WAL record, its contents are copied into an intermediate
buffer. However, doing so is not necessary if the record fits fully
into the current page, saving one memcpy for each such record. The
allocation handling of the intermediate buffer is also now done only
when a record crosses a page boundary, shaving some extra cycles when
reading a WAL record.
Author: Andrey Lepikhov
Reviewed-by: Kyotaro Horiguchi, Heikki Linnakangas
Discussion: https://postgr.es/m/c2ea54dd-a1d3-80eb-ddbf-7e6f258e615e@postgrespro.ru
Setting them to SIG_IGN seems unlikely to have any beneficial effect
on that platform, and given the signal numbering collision with SIGABRT,
it could easily have bad effects.
Given the lack of field complaints that can be traced to this, I don't
presently feel a need to back-patch.
Discussion: https://postgr.es/m/5627.1542477392@sss.pgh.pa.us
For reasons lost in the mists of time, most postmaster child processes
reset SIGTTIN/SIGTTOU signal handling to SIG_DFL, with the major exception
that backend sessions do not. It seems like a pretty bad idea for any
postmaster children to do that: if stderr is connected to the terminal,
and the user has put the postmaster in background, any log output would
result in the child process freezing up. Hence, switch them all to
doing what backends do, ie, nothing. This allows them to inherit the
postmaster's SIG_IGN setting. On the other hand, manually-launched
processes such as standalone backends will have default processing,
which seems fine.
In passing, also remove useless resets of SIGCONT and SIGWINCH signal
processing. Perhaps the postmaster once changed those to something
besides SIG_DFL, but it doesn't now, so these are just wasted (and
confusing) syscalls.
Basically, this propagates the changes made in commit 8e2998d8a from
backends to other postmaster children. Probably the only reason these
calls now exist elsewhere is that I missed changing pgstat.c along with
postgres.c at the time.
Given the lack of field complaints that can be traced to this, I don't
presently feel a need to back-patch.
Discussion: https://postgr.es/m/5627.1542477392@sss.pgh.pa.us
This commit completes the work prepared in 1a0586de36, splitting the
old TupleTableSlot implementation (which could store buffer, heap,
minimal and virtual slots) into four different slot types. As
described in the aforementioned commit, this is done with the goal of
making tuple table slots extensible, to allow for pluggable table
access methods.
To achieve runtime extensibility for TupleTableSlots, operations on
slots that can differ between types of slots are performed using the
TupleTableSlotOps struct provided at slot creation time. That
includes information from the size of TupleTableSlot struct to be
allocated, initialization, deforming etc. See the struct's definition
for more detailed information about callbacks TupleTableSlotOps.
I decided to rename TTSOpsBufferTuple to TTSOpsBufferHeapTuple and
ExecCopySlotTuple to ExecCopySlotHeapTuple, as that seems more
consistent with other naming introduced in recent patches.
There's plenty optimization potential in the slot implementation, but
according to benchmarking the state after this commit has similar
performance characteristics to before this set of changes, which seems
sufficient.
There's a few changes in execReplication.c that currently need to poke
through the slot abstraction, that'll be repaired once the pluggable
storage patchset provides the necessary infrastructure.
Author: Andres Freund and Ashutosh Bapat, with changes by Amit Khandekar
Discussion: https://postgr.es/m/20181105210039.hh4vvi4vwoq5ba2q@alap3.anarazel.de
This speeds up write operations (INSERT, UPDATE, DELETE, COPY, as well
as the future MERGE) on partitioned tables.
This changes the setup for tuple routing so that it does far less work
during the initial setup and pushes more work out to when partitions
receive tuples. PartitionDispatchData structs for sub-partitioned
tables are only created when a tuple gets routed through it. The
possibly large arrays in the PartitionTupleRouting struct have largely
been removed. The partitions[] array remains but now never contains any
NULL gaps. Previously the NULLs had to be skipped during
ExecCleanupTupleRouting(), which could add a large overhead to the
cleanup when the number of partitions was large. The partitions[] array
is allocated small to start with and only enlarged when we route tuples
to enough partitions that it runs out of space. This allows us to keep
simple single-row partition INSERTs running quickly. Redesign
The arrays in PartitionTupleRouting which stored the tuple translation maps
have now been removed. These have been moved out into a
PartitionRoutingInfo struct which is an additional field in ResultRelInfo.
The find_all_inheritors() call still remains by far the slowest part of
ExecSetupPartitionTupleRouting(). This commit just removes the other slow
parts.
In passing also rename the tuple translation maps from being ParentToChild
and ChildToParent to being RootToPartition and PartitionToRoot. The old
names mislead you into thinking that a partition of some sub-partitioned
table would translate to the rowtype of the sub-partitioned table rather
than the root partitioned table.
Authors: David Rowley and Amit Langote, heavily revised by Álvaro Herrera
Testing help from Jesper Pedersen and Kato Sho.
Discussion: https://postgr.es/m/CAKJS1f_1RJyFquuCKRFHTdcXqoPX-PYqAd7nz=GVBwvGh4a6xA@mail.gmail.com
The assumption made in 1a0586de36 was wrong, as evidenced by
buildfarm failure on locust, which runs with
force_parallel_mode=regress. The tuples accessed in either nodes are
in the outer slot, and we can't trivially rely on the slot type being
known because the leader might execute the subsidiary node directly,
or via the tuple queue on a worker. In the latter case the tuple will
always be a heaptuple slot, but in the former, it'll be whatever the
subsidiary node returns.
Virtual tuple table slots never need tuple deforming. Therefore, if we
know at expression compilation time, that a certain slot will always
be virtual, there's no need to create a tuple deforming routine for
it.
Author: Andres Freund
Discussion: https://postgr.es/m/20181105210039.hh4vvi4vwoq5ba2q@alap3.anarazel.de
This is important so JIT compilation knows what kind of tuple slot the
deforming routine can expect. There's also optimization potential for
expression initialization without JIT compilation. It e.g. seems
plausible to elide EEOP_*_FETCHSOME ops entirely when dealing with
virtual slots.
Author: Andres Freund
Discussion: https://postgr.es/m/20181105210039.hh4vvi4vwoq5ba2q@alap3.anarazel.de
Previously this information was computed when JIT compiling an
expression. But the information is useful for assertions in the
non-JIT case too (for assertions), therefore it makes sense to move
it.
This will, in a followup commit, allow to treat different slot types
differently. E.g. for virtual slots there's no need to generate a JIT
function to deform the slot.
Author: Andres Freund
Discussion: https://postgr.es/m/20181105210039.hh4vvi4vwoq5ba2q@alap3.anarazel.de
Upcoming work intends to allow pluggable ways to introduce new ways of
storing table data. Accessing those table access methods from the
executor requires TupleTableSlots to be carry tuples in the native
format of such storage methods; otherwise there'll be a significant
conversion overhead.
Different access methods will require different data to store tuples
efficiently (just like virtual, minimal, heap already require fields
in TupleTableSlot). To allow that without requiring additional pointer
indirections, we want to have different structs (embedding
TupleTableSlot) for different types of slots. Thus different types of
slots are needed, which requires adapting creators of slots.
The slot that most efficiently can represent a type of tuple in an
executor node will often depend on the type of slot a child node
uses. Therefore we need to track the type of slot is returned by
nodes, so parent slots can create slots based on that.
Relatedly, JIT compilation of tuple deforming needs to know which type
of slot a certain expression refers to, so it can create an
appropriate deforming function for the type of tuple in the slot.
But not all nodes will only return one type of slot, e.g. an append
node will potentially return different types of slots for each of its
subplans.
Therefore add function that allows to query the type of a node's
result slot, and whether it'll always be the same type (whether it's
fixed). This can be queried using ExecGetResultSlotOps().
The scan, result, inner, outer type of slots are automatically
inferred from ExecInitScanTupleSlot(), ExecInitResultSlot(),
left/right subtrees respectively. If that's not correct for a node,
that can be overwritten using new fields in PlanState.
This commit does not introduce the actually abstracted implementation
of different kind of TupleTableSlots, that will be left for a followup
commit. The different types of slots introduced will, for now, still
use the same backing implementation.
While this already partially invalidates the big comment in
tuptable.h, it seems to make more sense to update it later, when the
different TupleTableSlot implementations actually exist.
Author: Ashutosh Bapat and Andres Freund, with changes by Amit Khandekar
Discussion: https://postgr.es/m/20181105210039.hh4vvi4vwoq5ba2q@alap3.anarazel.de
Previously materializing a slot always returned a HeapTuple. As
current work aims to reduce the reliance on HeapTuples (so other
storage systems can work efficiently), that needs to change. Thus
split the tasks of materializing a slot (i.e. making it independent
from the underlying storage / other memory contexts) from fetching a
HeapTuple from the slot. For brevity, allow to fetch a HeapTuple from
a slot and materializing the slot at the same time, controlled by a
parameter.
For now some callers of ExecFetchSlotHeapTuple, with materialize =
true, expect that changes to the heap tuple will be reflected in the
underlying slot. Those places will be adapted in due course, so while
not pretty, that's OK for now.
Also rename ExecFetchSlotTuple to ExecFetchSlotHeapTupleDatum and
ExecFetchSlotTupleDatum to ExecFetchSlotHeapTupleDatum, as it's likely
that future storage methods will need similar methods. There already
is ExecFetchSlotMinimalTuple, so the new names make the naming scheme
more coherent.
Author: Ashutosh Bapat and Andres Freund, with changes by Amit Khandekar
Discussion: https://postgr.es/m/20181105210039.hh4vvi4vwoq5ba2q@alap3.anarazel.de
With run-time partition pruning, there is no longer necessarily an
executor node for each corresponding plan node.
Author: David Rowley <david.rowley@2ndquadrant.com>
The current pattern of reseting expressions both in
ExecProcessReturning() and ExecOnConflictUpdate() makes it harder than
necessary to reason about memory lifetimes. It also requires
materializing slots unnecessarily, although this patch doesn't take
advantage of the fact that that's not necessary anymore.
Instead reset the expression context once for each input tuple.
Author: Ashutosh Bapat
Discussion: https://postgr.es/m/20181105210039.hh4vvi4vwoq5ba2q@alap3.anarazel.de
ExecFindInitialMatchingSubPlans has to update the PartitionPruneState's
subplan mapping data to account for the removal of subplans it prunes.
However, that's only necessary if run-time pruning will also occur,
so we can skip it when that won't happen, which should result in not
needing to do the remapping in many cases. (We now need it only when
some partitions are potentially startup-time prunable and others are
potentially run-time prunable, which seems like an unusual case.)
Also make some marginal performance improvements in the remapping
itself. These will mainly win if most partitions got pruned by
the startup-time pruning, which is perhaps a debatable assumption
in this context.
Also fix some bogus comments, and rearrange code to marginally
reduce space consumption in the executor's query-lifespan context.
David Rowley, reviewed by Yoshikazu Imai
Discussion: https://postgr.es/m/CAKJS1f9+m6-di-zyy4B4AGn0y1B9F8UKDRigtBbNviXOkuyOpw@mail.gmail.com
These functions were not crystal clear about what their respective APIs
are. Make an effort to improve that.
Emre's patch was correct AFAICT, but I (Álvaro) felt the need to improve
a few comments a bit more. Any resulting errors are my own.
Per complaint from Coverity, Ning Yu, and Tom Lane.
Author: Emre Hasegeli, Álvaro Herrera
Reviewed-by: Tomas Vondra, Álvaro Herrera
Discussion: https://postgr.es/m/26769.1533090136@sss.pgh.pa.us
Commit 197e4af9 refactored the initialization of the libc random()
seed, but reduced the number of possible seeds values that could be
chosen in a given time period. This negation of the effects of
commit 98c50656c was unintentional. Replace with code that
shifts the fast moving timestamp bits left, similar to the original
algorithm (though not the previous float-tolerating coding, which
is no longer necessary).
Author: Thomas Munro
Reported-by: Noah Misch
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/20181112083358.GA1073796%40rfd.leadboat.com
BufFileSize() can't use off_t, because it's only 32 bits wide on
some systems. BufFile objects can have many 1GB segments so the
total size can exceed 2^31. The only known client of the function
is parallel CREATE INDEX, which was reported to fail when building
large indexes on Windows.
Though this is technically an ABI break on platforms with a 32 bit
off_t and we might normally avoid back-patching it, the function is
brand new and thus unlikely to have been discovered by extension
authors yet, and it's fairly thoroughly broken on those platforms
anyway, so just fix it.
Defect in 9da0cc35. Bug #15460. Back-patch to 11, where this
function landed.
Author: Thomas Munro
Reported-by: Paul van der Linden, Pavel Oskin
Reviewed-by: Peter Geoghegan
Discussion: https://postgr.es/m/15460-b6db80de822fa0ad%40postgresql.org
Discussion: https://postgr.es/m/CAHDGBJP_GsESbTt4P3FZA8kMUKuYxjg57XHF7NRBoKnR%3DCAR-g%40mail.gmail.com
date_trunc(field, timestamptz, zone_name) performs truncation using
the named time zone as reference, rather than working in the session
time zone as is the default behavior. It's equivalent to
date_trunc(field, timestamptz at time zone zone_name) at time zone zone_name
but it's faster, easier to type, and arguably easier to understand.
Vik Fearing and Tom Lane
Discussion: https://postgr.es/m/6249ffc4-2b22-4c1b-4e7d-7af84fedd7c6@2ndquadrant.com
Change lock level for renaming index (either ALTER INDEX or implicitly
via some other commands) from AccessExclusiveLock to
ShareUpdateExclusiveLock.
One reason we need a strong lock for relation renaming is that the
name change causes a rebuild of the relcache entry. Concurrent
sessions that have the relation open might not be able to handle the
relcache entry changing underneath them. Therefore, we need to lock
the relation in a way that no one can have the relation open
concurrently. But for indexes, the relcache handles reloads specially
in RelationReloadIndexInfo() in a way that keeps changes in the
relcache entry to a minimum. As long as no one keeps pointers to
rd_amcache and rd_options around across possible relcache flushes,
which is the case, this ought to be safe.
We also want to use a self-exclusive lock for correctness, so that
concurrent DDL doesn't overwrite the rename if they start updating
while still seeing the old version. Therefore, we use
ShareUpdateExclusiveLock, which is already used by other DDL commands
that want to operate in a concurrent manner.
The reason this is interesting at all is that renaming an index is a
typical part of a concurrent reindexing workflow (CREATE INDEX
CONCURRENTLY new + DROP INDEX CONCURRENTLY old + rename back). And
indeed a future built-in REINDEX CONCURRENTLY might rely on the ability
to do concurrent renames as well.
Reviewed-by: Andrey Klychkov <aaklychkov@mail.ru>
Reviewed-by: Fabrízio de Royes Mello <fabriziomello@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/1531767486.432607658@f357.i.mail.ru
If a failure happens when a transaction is starting between the moment
the transaction status is changed from TRANS_DEFAULT to TRANS_START and
the moment the current user ID and security context flags are fetched
via GetUserIdAndSecContext(), or before initializing its basic fields,
then those may get reset to incorrect values when the transaction
aborts, leaving the session in an inconsistent state.
One problem reported is that failing a starting transaction at the first
query of a session could cause several kinds of system crashes on the
follow-up queries.
In order to solve that, move the initialization of the transaction state
fields and the call of GetUserIdAndSecContext() in charge of fetching
the current user ID close to the point where the transaction status is
switched to TRANS_START, where there cannot be any error triggered
in-between, per an idea of Tom Lane. This properly ensures that the
current user ID, the security context flags and that the basic fields of
TransactionState remain consistent even if the transaction fails while
starting.
Reported-by: Richard Guo
Diagnosed-By: Richard Guo
Author: Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/CAN_9JTxECSb=pEPcb0a8d+6J+bDcOZ4=DgRo_B7Y5gRHJUM=Rw@mail.gmail.com
Backpatch-through: 9.4
Hexadecimal is consistently used as format to not bloat too much the
output but keep it readable. This information is useful mainly for
debugging purposes with for example pg_waldump.
Author: Michael Paquier
Reviewed-by: Nathan Bossart, Dmitry Dolgov, Andres Freund, Álvaro
Herrera
Discussion: https://postgr.es/m/20180413034734.GE1552@paquier.xyz
The code building PartitionBoundInfo based on the constituent partition
data read from catalogs has been located in partcache.c, with a specific
set of routines dedicated to bound types, like sorting or bound data
creation. All this logic is moved to partbounds.c and relocates all the
bound-specific logistic into it, with partition_bounds_create() as
principal entry point.
Author: Amit Langote
Reviewed-by: Michael Paquier, Álvaro Herrera
Discussion: https://postgr.es/m/3f289da8-6d10-75fe-814a-635e8b191d43@lab.ntt.co.jp
The realfail1 and realfail2 backup-prevention rules always returned
token type FCONST, ignoring the possibility that what we've scanned
is more appropriately described as ICONST. I think that at the
time that code was added, it might actually have been safe to not
distinguish; but since we started allowing AS-less aliases in SELECT
target lists, it's definitely legal to have a number immediately
followed by an identifier.
In the SELECT case, it seems there's no visible consequence because
make_const() will change the type back to integer anyway. But I'm
worried that there are other contexts, or will be in future, where
it's more important to get the constant's type right.
Hence, use process_integer_literal to correctly determine which
token type to return.
Arguably this is a bug fix, but given the lack of evidence of
user-visible problems, I'll refrain from back-patching.
Discussion: https://postgr.es/m/21364.1542136808@sss.pgh.pa.us
Make a bunch of basically-cosmetic changes to reduce the diffs between
the flex rules in scan.l, psqlscan.l, and pgc.l. Reorder some code,
adjust a lot of whitespace, sync some comments, make use of flex start
condition scopes to do that.
There are a few non-cosmetic changes in the ECPG lexer:
* Bring over the decimalfail rule (and support function
process_integer_literal) so that ECPG will lex "1..10" into
the same tokens as the backend would. I'm not sure this makes any
visible difference to users, but I'm not sure it doesn't, either.
* <xdc><<EOF>> gets its own rule so as to produce a more on-point
error message.
* Remove duplicate <SQL>{xdstart} rule.
John Naylor, with a few additional changes by me
Discussion: https://postgr.es/m/CAJVSVGWGqY9YBs2EwtRUkbNv=hXkN8yRPOoD1wxE6COgvvrz5g@mail.gmail.com
group clearing mechanism.
Commits 0e141c0fbb and baaf272ac9 introduced initialization of atomic
variables in InitProcess which means that it's not safe to look at those
for backends that aren't currently in use. Fix that by initializing them
during postmaster startup.
Reported-by: Andres Freund
Author: Amit Kapila
Backpatch-through: 9.6
Discussion: https://postgr.es/m/20181027104138.qmbbelopvy7cw2qv@alap3.anarazel.de
Commit 35c0754f failed to handle space-separated lists of alternative
hostnames in ldapserver, when building a URI for ldap_initialize()
(OpenLDAP). Such lists need to be expanded to space-separated URIs.
Repair. Back-patch to 11, to fix bug report #15495.
Author: Thomas Munro
Reported-by: Renaud Navarro
Discussion: https://postgr.es/m/15495-2c39fc196c95cd72%40postgresql.org
Coverty reports a possible buffer overrun in the code that populates the
pg_hba_file_rules view. It may not be a live bug due to restrictions
on options that can be used together, but let's increase MAX_HBA_OPTIONS
and correct a nearby misleading comment.
Back-patch to 10 where this code arrived.
Reported-by: Julian Hsiao
Discussion: https://postgr.es/m/CADnGQpzbkWdKS2YHNifwAvX5VEsJ5gW49U4o-7UL5pzyTv4vTg%40mail.gmail.com
This comes from f9b5b41, which is part of one the original commits that
implemented ON COMMIT actions. By looking at the truncation code, any
CCI needed happens locally when rebuilding indexes, so it looks safe to
just remove this final incrementation.
Author: Michael Paquier
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/20181109024731.GF2652@paquier.xyz
There's no point in asking deconstruct_array() for a null-flags
array when we already checked the array has no nulls, and aren't
going to examine the output anyhow. Not asking for this output
should make the code marginally faster, and it's also more
robust since if there somehow were nulls, deconstruct_array()
would throw an error.
Daniel Gustafsson
Discussion: https://postgr.es/m/289FFB8B-7AAB-48B5-A497-6E0D41D7BA47@yesql.se
classify_index_clause_usage() is O(N^2) in the number of distinct index
qual clauses it considers, because of its use of a simple search list to
store them. For nearly all queries, that's fine because only a few clauses
will be considered. But Alexander Kuzmenkov reported a machine-generated
query with 80000 (!) index qual clauses, which caused this code to take
forever. Somewhat remarkably, this is the only O(N^2) behavior we now
have for such a query, so let's fix it.
We can get rid of the O(N^2) runtime for cases like this without much
damage to the functionality of choose_bitmap_and() by separating out
paths with "too many" qual or pred clauses, and deeming them to always
be nonredundant with other paths. Then their clauses needn't go into
the search list, so it doesn't get too long, but we don't lose the
ability to consider bitmap AND plans altogether. I set the threshold
for "too many" to be 100 clauses per path, which should be plenty to
ensure no change in planning behavior for normal queries.
There are other things we could do to make this go faster, but it's not
clear that it's worth any additional effort. 80000 qual clauses require
a whole lot of work in many other places, too.
The code's been like this for a long time, so back-patch to all supported
branches. The troublesome query only works back to 9.5 (in 9.4 it fails
with stack overflow in the parser); so I'm not sure that fixing this in
9.4 has any real-world benefit, but perhaps it does.
Discussion: https://postgr.es/m/90c5bdfa-d633-dabe-9889-3cf3e1acd443@postgrespro.ru
The use of volatiles in procarray.c largely originated from the time
when postgres did not have reliable compiler and memory
barriers. That's not the case anymore, so we can do better.
Several of the functions in procarray.c can be bottlenecks, and
removal of volatile yields mildly better code.
The new state, with explicit memory barriers, is also more
correct. The previous use of volatile did not actually deliver
sufficient guarantees on weakly ordered machines, in particular the
logic in GetNewTransactionId() does not look safe. It seems unlikely
to be a problem in practice, but worth fixing.
Thomas and I independently wrote a patch for this.
Reported-By: Andres Freund and Thomas Munro
Author: Andres Freund, with cherrypicked changes from a patch by Thomas Munro
Discussion:
https://postgr.es/m/20181005172955.wyjb4fzcdzqtaxjq@alap3.anarazel.dehttps://postgr.es/m/CAEepm=1nff0x=7i3YQO16jLA2qw-F9O39YmUew4oq-xcBQBs0g@mail.gmail.com
The tests added in cfa0f4255b to skip
firing an RI trigger if any old key value is NULL can also be applied
for DELETE. This should give a performance gain in those cases, and it
also saves a lot of duplicate code in the actual RI triggers. (That
code was already dead code for the UPDATE cases.)
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
The ri_KeysEqual() calls in the foreign-key trigger functions to
optimize away some updates are useless because since
adfeef55cb those triggers are not enqueued
at all. (It's also not useful to keep these checks as some kind of
backstop, since it's also semantically correct to just run the full
check even with equal keys.)
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Previously the code checked PROC_IN_LOGICAL_DECODING and
PROC_IN_VACUUM separately. As the relevant variable is marked as
volatile, the compiler cannot combine the two tests. As
GetSnapshotData() is pretty hot in a number of workloads, it's
worthwhile to fix that.
It'd also be a good idea to get rid of the volatiles altogether. But
for one that's a larger patch, and for another, the code after this
change still seems at least as easy to read as before.
Author: Andres Freund
Discussion: https://postgr.es/m/20181005172955.wyjb4fzcdzqtaxjq@alap3.anarazel.de
This patch fixes several related cases in which pg_shdepend entries were
never made, or were lost, for references to roles appearing in the ACLs of
schemas and/or types. While that did no immediate harm, if a referenced
role were later dropped, the drop would be allowed and would leave a
dangling reference in the object's ACL. That still wasn't a big problem
for normal database usage, but it would cause obscure failures in
subsequent dump/reload or pg_upgrade attempts, taking the form of
attempts to grant privileges to all-numeric role names. (I think I've
seen field reports matching that symptom, but can't find any right now.)
Several cases are fixed here:
1. ALTER DOMAIN SET/DROP DEFAULT would lose the dependencies for any
existing ACL entries for the domain. This case is ancient, dating
back as far as we've had pg_shdepend tracking at all.
2. If a default type privilege applies, CREATE TYPE recorded the
ACL properly but forgot to install dependency entries for it.
This dates to the addition of default privileges for types in 9.2.
3. If a default schema privilege applies, CREATE SCHEMA recorded the
ACL properly but forgot to install dependency entries for it.
This dates to the addition of default privileges for schemas in v10
(commit ab89e465c).
Another somewhat-related problem is that when creating a relation
rowtype or implicit array type, TypeCreate would apply any available
default type privileges to that type, which we don't really want
since such an object isn't supposed to have privileges of its own.
(You can't, for example, drop such privileges once they've been added
to an array type.)
ab89e465c is also to blame for a race condition in the regression tests:
privileges.sql transiently installed globally-applicable default
privileges on schemas, which sometimes got absorbed into the ACLs of
schemas created by concurrent test scripts. This should have resulted
in failures when privileges.sql tried to drop the role holding such
privileges; but thanks to the bug fixed here, it instead led to dangling
ACLs in the final state of the regression database. We'd managed not to
notice that, but it became obvious in the wake of commit da906766c, which
allowed the race condition to occur in pg_upgrade tests.
To fix, add a function recordDependencyOnNewAcl to encapsulate what
callers of get_user_default_acl need to do; while the original call
sites got that right via ad-hoc code, none of the later-added ones
have. Also change GenerateTypeDependencies to generate these
dependencies, which requires adding the typacl to its parameter list.
(That might be annoying if there are any extensions calling that
function directly; but if there are, they're most likely buggy in the
same way as the core callers were, so they need work anyway.) While
I was at it, I changed GenerateTypeDependencies to accept most of its
parameters in the form of a Form_pg_type pointer, making its parameter
list a bit less unwieldy and mistake-prone.
The test race condition is fixed just by wrapping the addition and
removal of default privileges into a single transaction, so that that
state is never visible externally. We might eventually prefer to
separate out tests of default privileges into a script that runs by
itself, but that would be a bigger change and would make the tests
run slower overall.
Back-patch relevant parts to all supported branches.
Discussion: https://postgr.es/m/15719.1541725287@sss.pgh.pa.us
Before this commit slot_getattr() checked for dropped
columns (returning NULL in that case), but only after checking for
previously deformed columns. As slot_deform_tuple() does not contain
such a check, the check in slot_getattr() would often not have been
reached, depending on previous use of the slot.
These days locking and plan invalidation ought to ensure that dropped
columns are not accessed in query plans. Therefore this commit just
drops the insufficient check in slot_getattr(). It's possible that
we'll find some holes againt use of dropped columns, but if so, those
need to be addressed independent of slot_getattr(), as most accesses
don't go through that function anyway.
Author: Andres Freund
Discussion: https://postgr.es/m/20181107174403.zai7fedgcjoqx44p@alap3.anarazel.de
In a lot of nodes the return slot is not required. That can either be
because the node doesn't do any projection (say an Append node), or
because the node does perform projections but the projection is
optimized away because the projection would yield an identical row.
Slots aren't that small, especially for wide rows, so it's worthwhile
to avoid creating them. It's not possible to just skip creating the
slot - it's currently used to determine the tuple descriptor returned
by ExecGetResultType(). So separate the determination of the result
type from the slot creation. The work previously done internally
ExecInitResultTupleSlotTL() can now also be done separately with
ExecInitResultTypeTL() and ExecInitResultSlot(). That way nodes that
aren't guaranteed to need a result slot, can use
ExecInitResultTypeTL() to determine the result type of the node, and
ExecAssignScanProjectionInfo() (via
ExecConditionalAssignProjectionInfo()) determines that a result slot
is needed, it is created with ExecInitResultSlot().
Besides the advantage of avoiding to create slots that then are
unused, this is necessary preparation for later patches around tuple
table slot abstraction. In particular separating the return descriptor
and slot is a prerequisite to allow JITing of tuple deforming with
knowledge of the underlying tuple format, and to avoid unnecessarily
creating JITed tuple deforming for virtual slots.
This commit removes a redundant argument from
ExecInitResultTupleSlotTL(). While this commit touches a lot of the
relevant lines anyway, it'd normally still not worthwhile to cause
breakage, except that aforementioned later commits will touch *all*
ExecInitResultTupleSlotTL() callers anyway (but fits worse
thematically).
Author: Andres Freund
Discussion: https://postgr.es/m/20181105210039.hh4vvi4vwoq5ba2q@alap3.anarazel.de
This commit fixes a set of issues with ON COMMIT actions when used on
partitioned tables and tables with inheritance children:
- Applying ON COMMIT DROP on a partitioned table with partitions or on a
table with inheritance children caused a failure at commit time, with
complains about the children being already dropped as all relations are
dropped one at the same time.
- Applying ON COMMIT DELETE on a partition relying on a partitioned
table which uses ON COMMIT DROP would cause the partition truncation to
fail as the parent is removed first.
The solution to the first problem is to handle the removal of all the
dependencies in one go instead of dropping relations one-by-one, based
on a suggestion from Álvaro Herrera. So instead all the relation OIDs
to remove are gathered and then processed in one round of multiple
deletions.
The solution to the second problem is to reorder the actions, with
truncation happening first and relation drop done after. Even if it
means that a partition could be first truncated, then immediately
dropped if its partitioned table is dropped, this has the merit to keep
the code simple as there is no need to do existence checks on the
relations to drop.
Contrary to a manual TRUNCATE on a partitioned table, ON COMMIT DELETE
does not cascade to its partitions. The ON COMMIT action defined on
each partition gets the priority.
Author: Michael Paquier
Reviewed-by: Amit Langote, Álvaro Herrera, Robert Haas
Discussion: https://postgr.es/m/68f17907-ec98-1192-f99f-8011400517f5@lab.ntt.co.jp
Backpatch-through: 10
Previously it was possible to set client_min_messages to FATAL or PANIC,
which had the effect of suppressing transmission of regular ERROR messages
to the client. Perhaps that seemed like a useful option in the past, but
the trouble with it is that it breaks guarantees that are explicitly made
in our FE/BE protocol spec about how a query cycle can end. While libpq
and psql manage to cope with the omission, that's mostly because they
are not very bright; client libraries that have more semantic knowledge
are likely to get confused. Notably, pgODBC doesn't behave very sanely.
Let's fix this by getting rid of the ability to set client_min_messages
above ERROR.
In HEAD, just remove the FATAL and PANIC options from the set of allowed
enum values for client_min_messages. (This change also affects
trace_recovery_messages, but that's OK since these aren't useful values
for that variable either.)
In the back branches, there was concern that rejecting these values might
break applications that are explicitly setting things that way. I'm
pretty skeptical of that argument, but accommodate it by accepting these
values and then internally setting the variable to ERROR anyway.
In all branches, this allows a couple of tiny simplifications in the
logic in elog.c, so do that.
Also respond to the point that was made that client_min_messages has
exactly nothing to do with the server's logging behavior, and therefore
does not belong in the "When To Log" subsection of the documentation.
The "Statement Behavior" subsection is a better match, so move it there.
Jonah Harris and Tom Lane
Discussion: https://postgr.es/m/7809.1541521180@sss.pgh.pa.us
Discussion: https://postgr.es/m/15479-ef0f4cc2fd995ca2@postgresql.org
The original code to propagate NOT NULL and default expressions
specified when creating a partition was mostly copy-pasted from
typed-tables creation, but not being a great match it contained some
duplicity, inefficiency and bugs.
This commit fixes the bug that NOT NULL constraints declared in the
parent table would not be honored in the partition. One reported issue
that is not fixed is that a DEFAULT declared in the child is not used
when inserting through the parent. That would amount to a behavioral
change that's better not back-patched.
This rewrite makes the code simpler:
1. instead of checking for duplicate column names in its own block,
reuse the original one that already did that;
2. instead of concatenating the list of columns from parent and the one
declared in the partition and scanning the result to (incorrectly)
propagate defaults and not-null constraints, just scan the latter
searching the former for a match, and merging sensibly. This works
because we know the list in the parent is already correct and there can
only be one parent.
This rewrite makes ColumnDef->is_from_parent unused, so it's removed
on branch master; on released branches, it's kept as an unused field in
order not to cause ABI incompatibilities.
This commit also adds a test case for creating partitions with
collations mismatching that on the parent table, something that is
closely related to the code being patched. No code change is introduced
though, since that'd be a behavior change that could break some (broken)
working applications.
Amit Langote wrote a less invasive fix for the original
NOT NULL/defaults bug, but while I kept the tests he added, I ended up
not using his original code. Ashutosh Bapat reviewed Amit's fix. Amit
reviewed mine.
Author: Álvaro Herrera, Amit Langote
Reviewed-by: Ashutosh Bapat, Amit Langote
Reported-by: Jürgen Strobel (bug #15212)
Discussion: https://postgr.es/m/152746742177.1291.9847032632907407358@wrigleys.postgresql.org
This mainly de-duplicates code. As evaluating a system variable isn't
the hottest path and the current inline implementation ends up calling
out to an external function anyway, this is OK from a performance POV.
The main motivation for de-duplicating is the upcoming slot
abstraction work, after which there's not guaranteed to be a HeapTuple
backing the slot.
Author: Andres Freund, Amit Khandekar
Discussion: https://postgr.es/m/20181105210039.hh4vvi4vwoq5ba2q@alap3.anarazel.de
Previously the expressions were built with the HashJoinState as a
parent. That's incorrect.
Currently this does not appear to be harmful, but for the upcoming
'slot abstraction' work this proves to be problematic, as the
underlying slot types can differ between Hash and HashJoin. It's
possible that this already causes a problem, but I've not been able to
come up with a scenario. Therefore don't backpatch at this point.
Author: Andres Freund
Discussion: https://postgr.es/m/20180220224318.gw4oe5jadhpmcdnm@alap3.anarazel.de
The planner doesn't make any use of root->total_table_pages until it
estimates costs of indexscans, so we don't need to compute it as
early as that's currently done. By doing the calculation between
set_base_rel_sizes and set_base_rel_pathlists, we can omit relations
that get removed from the query by partition pruning or constraint
exclusion, which seems like a more accurate basis for costing.
(Historical note: I think at the time this code was written, there
was not a separation between the "set sizes" and "set pathlists"
steps, so that this approach would have been impossible at the time.
But now that we have that separation, this is clearly the better way
to do things.)
David Rowley, reviewed by Edmund Horner
Discussion: https://postgr.es/m/CAKJS1f-NG1mRM0VOtkAG7=ZLQWihoqees9R4ki3CKBB0-fRfCA@mail.gmail.com
The code added by commit c203d6cf8 causes a crash in at least one case,
where a potentially-optimizable expression index has a storage type
different from the input data type. A cursory code review turned up
numerous other problems that seem impractical to fix on short notice.
Andres argued for revert of that patch some time ago, and if additional
senior committers had been paying attention, that's likely what would
have happened, but we were not :-(
At this point we can't just revert, at least not in v11, because that would
mean an ABI break for code touching relcache entries. And we should not
remove the (also buggy) support for the recheck_on_update index reloption,
since it might already be used in some databases in the field. So this
patch just does the as-little-invasive-as-possible measure of disabling
the feature as though recheck_on_update were forced off for all indexes.
I also removed the related regression tests (which would otherwise fail)
and the user-facing documentation of the reloption.
We should undertake a more thorough code cleanup if the patch can't be
fixed, but not under the extreme time pressure of being already overdue
for 11.1 release.
Per report from Ondřej Bouda and subsequent private discussion among
pgsql-release.
Discussion: https://postgr.es/m/20181106185255.776mstcyehnc63ty@alvherre.pgsql
A ConvertRowtypeExpr is used to translate a whole-row reference of a
child to that of a parent. The planner produces nested
ConvertRowtypeExpr while translating whole-row reference of a leaf
partition in a multi-level partition hierarchy. Executor then
translates the whole-row reference from the leaf partition into all
the intermediate parent's whole-row references before arriving at the
final whole-row reference. It could instead translate the whole-row
reference from the leaf partition directly to the top-most parent's
whole-row reference skipping any intermediate translations.
Ashutosh Bapat, with tests by Kyotaro Horiguchi and some
editorialization by me. Reviewed by Andres Freund, Pavel Stehule,
Kyotaro Horiguchi, Dmitry Dolgov, Tom Lane.
The "rb" prefix is used by Ruby, so that our existing code results
in name collisions that break plruby. We discussed ways to prevent
that by adjusting dynamic linker options, but it seems that at best
we'd move the pain to other cases. Renaming to avoid the collision
is the only portable fix anyway. Fortunately, our rbtree code is
not (yet?) widely used --- in core, there's only a single usage
in GIN --- so it seems likely that we can get away with a rename.
I chose to do this basically as s/rb/rbt/g, except for places where
there already was a "t" after "rb". The patch could have been made
smaller by only touching linker-visible symbols, but it would have
resulted in oddly inconsistent-looking code. Better to make it look
like "rbt" was the plan all along.
Back-patch to v10. The rbtree.c code exists back to 9.5, but
rb_iterate() which is the actual immediate source of pain was added
in v10, so it seems like changing the names before that would have
more risk than benefit.
Per report from Pavel Raiskup.
Discussion: https://postgr.es/m/4738198.8KVIIDhgEB@nb.usersys.redhat.com
pg_promote uses nothing relying on a global state, so it is fine to mark
it as parallel-safe, conclusion based on a detailed analysis from Robert
Haas. This also fixes an inconsistency where pg_proc.dat missed to mark
the function with its previous value for proparallel, update which does
not matter now as the default is used.
Based on a discussion between multiple folks: Laurenz Albe, Robert Haas,
Amit Kapila, Tom Lane and myself.
Discussion: https://postgr.es/m/20181029082530.GL14242@paquier.xyz
When a partition is created as part of a trigger processing, it is
possible that the partition which just gets created changes the
properties of the table the executor of the ongoing command relies on,
causing a subsequent crash. This has been found possible when for
example using a BEFORE INSERT which creates a new partition for a
partitioned table being inserted to.
Any attempt to do so is blocked when working on a partition, with
regression tests added for both CREATE TABLE PARTITION OF and ALTER
TABLE ATTACH PARTITION.
Reported-by: Dmitry Shalashov
Author: Amit Langote
Reviewed-by: Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/15437-3fe01ee66bd1bae1@postgresql.org
Backpatch-through: 10
Those tables have no physical storage, making this option unusable with
partition trees as at commit time an actual truncation was attempted.
There are still issues with the way ON COMMIT actions are done when
mixing several action types, however this impacts as well inheritance
trees, so this issue will be dealt with later.
Reported-by: Rajkumar Raghuwanshi
Author: Amit Langote
Reviewed-by: Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/CAKcux6mhgcjSiB_egqEAEFgX462QZtncU8QCAJ2HZwM-wWGVew@mail.gmail.com
Modifying the parse tree at execution time is, or at least ought to be,
verboten. It seems quite difficult to actually cause a crash this way
in v11 (although you can exhibit it pretty easily in HEAD by messing
with plan_cache_mode). Nonetheless, it's risky, so fix and back-patch.
Discussion: https://postgr.es/m/13789.1541359611@sss.pgh.pa.us
This only became a problem with 4c640f4f38, which didn't synchronize
the value agg_strict_input_check.nargs is set to, with the guard
condition for emitting the operation.
Besides such instructions being unnecessary overhead, currently the
LLVM JIT provider doesn't support them. It seems more sensible to
avoid generating such instruction than supporting them. Add assertions
to make it easier to debug a potential further occurance.
Discussion: https://postgr.es/m/2a505161-2727-2473-7c46-591ed108ac52@email.cz
Backpatch: 11-, like 4c640f4f38.
I (Andres) broke this unintentionally in 69c3936a14, by checking
strictness for all input expressions computed for an aggregate, rather
than just the input for the aggregate transition function.
Reported-By: Ondřej Bouda
Bisected-By: Tom Lane
Diagnosed-By: Andrew Gierth
Discussion: https://postgr.es/m/2a505161-2727-2473-7c46-591ed108ac52@email.cz
Backpatch: 11-, like 69c3936a14
On Windows, in UTF8 database encoding, what char2wchar() produces is
UTF16 not UTF32, ie, characters above U+FFFF will be represented by
surrogate pairs. t_isdigit() and siblings did not account for this
and failed to provide a large enough result buffer. That in turn
led to bogus "invalid multibyte character for locale" errors, because
contrary to what you might think from char2wchar()'s documentation,
its Windows code path doesn't cope sanely with buffer overflow.
The solution for t_isdigit() and siblings is pretty clear: provide
a 3-wchar_t result buffer not 2.
char2wchar() also needs some work to provide more consistent, and more
accurately documented, buffer overrun behavior. But that's a bigger job
and it doesn't actually have any immediate payoff, so leave it for later.
Per bug #15476 from Kenji Uno, who deserves credit for identifying the
cause of the problem. Back-patch to all active branches.
Discussion: https://postgr.es/m/15476-4314f480acf0f114@postgresql.org
When creating partitioned indexes, the tablespace was not being saved
for the parent index. This meant that subsequently created partitions
would not use the right tablespace for their indexes.
ALTER INDEX SET TABLESPACE and ALTER INDEX ALL IN TABLESPACE raised
errors when tried; fix them too. This requires bespoke code for
ATExecCmd() that applies to the special case when the tablespace move is
just a catalog change.
Discussion: https://postgr.es/m/20181102003138.uxpaca6qfxzskepi@alvherre.pgsql
NULL keys in left joins were skipped when building batch files.
Repair, by making the keep_nulls argument to ExecHashGetHashValue()
depend on whether this is a left outer join, as we do in other
paths.
Bug #15475. Thinko in 1804284042. Back-patch to 11.
Reported-by: Paul Schaap
Diagnosed-by: Andrew Gierth
Dicussion: https://postgr.es/m/15475-11a7a783fed72a36%40postgresql.org
When restoring slot information from disk at startup and filling in
shared memory information, the startup process would issue a PANIC
message if more slots are found than what max_replication_slots allows,
and then Postgres generates a core dump, recommending to increase
max_replication_slots. This gives users a switch to crash Postgres at
will by creating slots, lower the configuration to not support it, and
then restart it.
Making Postgres crash hard in this case is overdoing it just to give a
recommendation to users. So instead use a FATAL, which makes Postgres
fail to start without crashing, still giving the recommendation. This
is more consistent with what happens for prepared transactions for
example.
Author: Michael Paquier
Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/20181030025109.GD1644@paquier.xyz
This has been deprecated and effectively unused for a long time.
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
The project message style guide dictates: "When citing the name of an
object, state what kind of object it is". The parallel CREATE INDEX
patch added a worker number to most of the trace_sort messages within
tuplesort.c without specifying the object type. Bring these messages
into compliance with the style guide.
We're still treating a leader or serial Tuplesortstate as having worker
number -1. trace_sort is a developer option, and these two cases are
highly comparable, so this seems appropriate.
Per complaint from Tom Lane.
Discussion: https://postgr.es/m/8330.1540831863@sss.pgh.pa.us
Backpatch: 11-, where parallel CREATE INDEX was introduced.
Previously it was possible to create a slot, change wal_level, and
restart, even if the new wal_level was insufficient for the
slot. That's a problem for both logical and physical slots, because
the necessary WAL records are not generated.
This removes a few tests in newer versions that, somewhat
inexplicably, whether restarting with a too low wal_level worked (a
buggy behaviour!).
Reported-By: Joshua D. Drake
Author: Andres Freund
Discussion: https://postgr.es/m/20181029191304.lbsmhshkyymhw22w@alap3.anarazel.de
Backpatch: 9.4-, where replication slots where introduced
spgendscan neglected to pfree all the memory allocated by spgbeginscan.
It's possible to get away with that in most normal queries, since the
memory is allocated in the executor's per-query context which is about
to get deleted anyway; but it causes severe memory leakage during
creation or filling of large exclusion-constraint indexes.
Also, document that amendscan is supposed to free what ambeginscan
allocates. The docs' lack of clarity on that point probably caused this
bug to begin with. (There is discussion of changing that API spec going
forward, but I don't think it'd be appropriate for the back branches.)
Per report from Bruno Wolff. It's been like this since the beginning,
so back-patch to all active branches.
In HEAD, also fix an independent leak caused by commit 2a6368343
(allocating memory during spgrescan instead of spgbeginscan, which
might be all right if it got cleaned up, but it didn't). And do a bit
of code beautification on that commit, too.
Discussion: https://postgr.es/m/20181024012314.GA27428@wolff.to
Tom Lane
Heikki Linnakangas
Peter Eisentraut
Alvaro Herrera
Michael Paquier
Tomas Vondra
Andres Freund
Etsuro Fujita
Magnus Hagander
Andrew Gierth
Andrew Dunstan
Bruce Momjian
Peter Eisentraut
Alexander Korotkov
Greg Stark
Peter Geoghegan
Amit Kapila
Stephen Frost
Thomas Munro
Robert Haas