GetMemoryChunkSpace, not just the palloc request size. This brings the
allocatedMemory counter close enough to reality (as measured by
MemoryContextStats printouts) that I think we can get rid of the arbitrary
factor-of-2 adjustment that was put into the code initially. Given the
sensitivity of GIN build to work memory size, not using as much of work
memory as we're allowed to seems a pretty bad idea.
it failed for splits of non-leaf pages because in such pages the first
data key on a page is suppressed, and so we can't just copy the first
key from the right page to reconstitute the left page's high key.
Problem found by Koichi Suzuki, patch by Heikki.
checkpoint. This guards against an unlikely data-loss scenario in which
we re-use the relfilenode, then crash, then replay the deletion and
recreation of the file. Even then we'd be OK if all insertions into the
new relation had been WAL-logged ... but that's not guaranteed given all
the no-WAL-logging optimizations that have recently been added.
Patch by Heikki Linnakangas, per a discussion last month.
even in code paths where we don't pay any subsequent attention to the typmod
value. This seems needed in view of the fact that 8.3's generalized typmod
support will accept a lot of bogus syntax, such as "timestamp(foo)" or
"record(int, 42)" --- if we allow such things to pass without comment,
users will get confused. Per a recent example from Greg Stark.
To implement this in a way that's not very vulnerable to future
bugs-of-omission, refactor the API of parse_type.c's TypeName lookup routines
so that typmod validation is folded into the base lookup operation. Callers
can still choose not to receive the encoded typmod, but we'll check the
decoration anyway if it's present.
ginRedoInsert(), because other ginRedo* functions rewrite whole page or
make changes which could be applied several times without consistent's loss
- Remove check of identifying of corresponding split record:
it's possible that replaying of WAL starts after actual page split, but before
removing of that split from incomplete splits list. In this case, that check
cause FATAL error.
Per stress test which reproduces bug reported by Craig McElroy
<craig.mcelroy@contegix.com>
usage of any information from system catalog, because it could be called during
replay of WAL.
Per bug report from Craig McElroy <craig.mcelroy@contegix.com>. Patch doesn't
change on-disk storage.
having several of them. Add two more flags: whether the process is
executing an ANALYZE, and whether a vacuum is for Xid wraparound (which
is obviously only set by autovacuum).
Sneakily move the worker's recently-acquired PostAuthDelay to a more useful
place.
when relkind = RELKIND_RELATION. This syncs these tests with the Asserts
in tuptoaster.c, and ensures that we won't ever try to, for example,
compress a sequence's tuple. Problem found by Greg Stark while stress-testing
with much-smaller-than-normal page sizes.
has been consumed, recheck against the latest value of RedoRecPtr before
really sending the signal. This avoids useless checkpoint activity if
XLogWrite is executed when we have a very stale local copy of RedoRecPtr.
The potential for useless checkpoint is very much worse in 8.3 because of
the walwriter process (which never does XLogInsert), so while this behavior
was intentional, it needs to be changed. Per report from Itagaki Takahiro.
compiler --- at least on ARM, it does. I suspect that the varvarlena patch
has been creating larger-than-intended toast pointers all along on ARM,
but it wasn't exposed until the latest tweak added some Asserts that
calculated the expected size in a different way. We could probably have
fixed this by adding __attribute__((packed)) as is done for ItemPointerData,
but struct varattrib_pointer isn't really all that useful anyway, so it
seems cleanest to just get rid of it and have only struct varattrib_1b_e.
Per results from buildfarm member quagga.
explicitly. This means a TOAST pointer takes 18 bytes instead of 17 --- still
smaller than in 8.2 --- which seems a good tradeoff to ensure we won't have
painted ourselves into a corner if we want to support multiple types of TOAST
pointer later on. Per discussion with Greg Stark.
while the restore_command does its thing, then 'recovering XXX' while
processing the segment file. These operations are heavyweight enough
that an extra PS display set shouldn't bother anyone.
recovery stop time was used. This avoids a corner-case risk of trying to
overwrite an existing archived copy of the last WAL segment, and seems
simpler and cleaner all around than the original definition. Per example
from Jon Colverson and subsequent analysis by Simon.
decompression of an already-compressed external value when we have to copy
it; save a few cycles when a value is too short for compression; and
annotate various lines that are currently unreachable.
- create a separate archive_mode GUC, on which archive_command is dependent
- %r option in recovery.conf sends last restartpoint to recovery command
- %r used in pg_standby, updated README
- minor other code cleanup in pg_standby
- doc on Warm Standby now mentions pg_standby and %r
- log_restartpoints recovery option emits LOG message at each restartpoint
- end of recovery now displays last transaction end time, as requested
by Warren Little; also shown at each restartpoint
- restart archiver if needed to carry away WAL files at shutdown
Simon Riggs
to not cause needless copying of text datums that have 1-byte headers.
Greg Stark, in response to performance gripe from Guillaume Smet and
ITAGAKI Takahiro.
unpruned XMAX in its header. At the cost of 4 bytes per page, this keeps us
from performing heap_page_prune when there's no chance of pruning anything.
Seems to be necessary per Heikki's preliminary performance testing.
columns, and the new version can be stored on the same heap page, we no longer
generate extra index entries for the new version. Instead, index searches
follow the HOT-chain links to ensure they find the correct tuple version.
In addition, this patch introduces the ability to "prune" dead tuples on a
per-page basis, without having to do a complete VACUUM pass to recover space.
VACUUM is still needed to clean up dead index entries, however.
Pavan Deolasee, with help from a bunch of other people.
than two independent bits (one of which was never used in heap pages anyway,
or at least hadn't been in a very long time). This gives us flexibility to
add the HOT notions of redirected and dead item pointers without requiring
anything so klugy as magic values of lp_off and lp_len. The state values
are chosen so that for the states currently in use (pre-HOT) there is no
change in the physical representation.
ReadNewTransactionId from GetSnapshotData --- with a "latestCompletedXid"
variable that is updated during transaction commit or abort. Since
latestCompletedXid is written only in places that had to lock ProcArrayLock
exclusively anyway, and is read only in places that had to lock ProcArrayLock
shared anyway, it adds no new locking requirements to the system despite being
cluster-wide. Moreover, removing ReadNewTransactionId from snapshot
acquisition eliminates the need to take both XidGenLock and ProcArrayLock at
the same time. Since XidGenLock is sometimes held across I/O this can be a
significant win. Some preliminary benchmarking suggested that this patch has
no effect on average throughput but can significantly improve the worst-case
transaction times seen in pgbench. Concept by Florian Pflug, implementation
by Tom Lane.
no need for serialization against snapshot-taking because the xact doesn't
affect anyone else's snapshot anyway. Per discussion. Also, move various
info about the interlocking of transactions and snapshots out of code comments
and into a hopefully-more-cohesive discussion in access/transam/README.
Also, remove a couple of now-obsolete comments about having to force some WAL
to be written to persuade RecordTransactionCommit to do its thing.
big misalignement, then it tries to split page basing on distribution
of boxe's centers.
Per report from Dolafi, Tom <dolafit@janelia.hhmi.org>
Backpatch is needed, change doesn't affect on-disk storage.
rows will normally never obtain an XID at all. We already did things this way
for subtransactions, but this patch extends the concept to top-level
transactions. In applications where there are lots of short read-only
transactions, this should improve performance noticeably; not so much from
removal of the actual XID-assignments, as from reduction of overhead that's
driven by the rate of XID consumption. We add a concept of a "virtual
transaction ID" so that active transactions can be uniquely identified even
if they don't have a regular XID. This is a much lighter-weight concept:
uniqueness of VXIDs is only guaranteed over the short term, and no on-disk
record is made about them.
Florian Pflug, with some editorialization by Tom.
There are still some loose ends: I didn't do anything about the SET FROM
CURRENT idea yet, and it's not real clear whether we are happy with the
interaction of SET LOCAL with function-local settings. The documentation
is a bit spartan, too.
Oleg Bartunov and Teodor Sigaev, but I did a lot of editorializing,
so anything that's broken is probably my fault.
Documentation is nonexistent as yet, but let's land the patch so we can
get some portability testing done.
that still thought they could set HEAP_XMAX_COMMITTED immediately after
seeing the other transaction commit. Make them use the same logic as
tqual.c does to determine if the hint bit can be set yet.
First, we cannot assume that XLogAsyncCommitFlush guarantees hint bits will be
settable, because clog.c's inexact LSN bookkeeping results in windows where a
previously flushed transaction is considered unhintable because it shares an
LSN slot with a later unflushed transaction. But repair_frag requires
XMIN_COMMITTED to be correct so that it can distinguish tuples moved by the
current vacuum. Since not being able to set the bit is an uncommon corner
case, the most practical way of dealing with it seems to be to abandon
shrinking (ie, don't invoke repair_frag) when we find a non-dead tuple whose
XMIN_COMMITTED bit couldn't be set.
Second, it is possible for the same reason that a RECENTLY_DEAD tuple does not
get its XMAX_COMMITTED bit set during scan_heap. But by the time repair_frag
examines the tuple it might be possible to set the bit. We therefore must
take buffer content lock when calling HeapTupleSatisfiesVacuum a second time,
else we can get an Assert failure in SetBufferCommitInfoNeedsSave. This
latter bug is latent in existing releases, but I think it cannot actually
occur without async commit, since the first HeapTupleSatisfiesVacuum call
should always have set the bit. So I'm not going to back-patch it.
In passing, reduce the existing "cannot shrink relation" messages from NOTICE
to LOG level. The new message must be no higher than LOG if we don't want
unpredictable regression test failures, and consistency seems like a good
idea. Also arrange that only one such message is reported per VACUUM FULL;
in typical scenarios you could get spammed with many such messages, which
seems a bit useless.
displayed in the postmaster log. This avoids Windows-specific problems with
localized time zone names that are in the wrong encoding, and generally seems
like a good idea to forestall other potential platform-dependent issues.
To preserve the existing behavior that all backends will log in the same time
zone, create a new GUC variable log_timezone that can only be changed on a
system-wide basis, and reference log-related calculations to that zone instead
of the TimeZone variable.
This fixes the issue reported by Hiroshi Saito that timestamps printed by
xlog.c startup could be improperly localized on Windows. We still need a
simpler patch for that problem in the back branches, however.
before reporting a transaction committed. Data consistency is still
guaranteed (unlike setting fsync = off), but a crash may lose the effects
of the last few transactions. Patch by Simon, some editorialization by Tom.
and fsync WAL at convenient intervals. For the moment it just tries to
offload this work from backends, but soon it will be responsible for
guaranteeing a maximum delay before asynchronously-committed transactions
will be flushed to disk.
This is a portion of Simon Riggs' async-commit patch, committed to CVS
separately because a background WAL writer seems like it might be a good idea
independently of the async-commit feature. I rebased walwriter.c on
bgwriter.c because it seemed like a more appropriate way of handling signals;
while the startup/shutdown logic in postmaster.c is more like autovac because
we want walwriter to quit before we start the shutdown checkpoint.
over a fairly long period of time, rather than being spat out in a burst.
This happens only for background checkpoints carried out by the bgwriter;
other cases, such as a shutdown checkpoint, are still done at full speed.
Remove the "all buffers" scan in the bgwriter, and associated stats
infrastructure, since this seems no longer very useful when the checkpoint
itself is properly throttled.
Original patch by Itagaki Takahiro, reworked by Heikki Linnakangas,
and some minor API editorialization by me.
pseudo HeapScanDesc created for a bitmap heap scan. This avoids some useless
overhead during a bitmap scan startup, in particular invoking the syncscan
code. (We might someday want to do that, but right now it's merely useless
contention for shared memory, to say nothing of possibly pushing useful
entries out of syncscan's small LRU list.) This also allows elimination of
ugly pgstat_discount_heap_scan() kluge.
which is the only state in which it's safe to initiate database queries.
It turns out that all but two of the callers thought that's what it meant;
and the other two were using it as a proxy for "will GetTopTransactionId()
return a nonzero XID"? Since it was in fact an unreliable guide to that,
make those two just invoke GetTopTransactionId() always, then deal with a
zero result if they get one.
- Fix possible deadlock between UPDATE and VACUUM queries. Bug never was
observed in 8.2, but it still exist there. HEAD is more sensitive to
bug after recent "ring" of buffer improvements.
- Fix WAL creation: if parent page is stored as is after split then
incomplete split isn't removed during replay. This happens rather rare, only
on large tables with a lot of updates/inserts.
- Fix WAL replay: there was wrong test of XLR_BKP_BLOCK_* for left
page after deletion of page. That causes wrong rightlink field: it pointed
to deleted page.
- add checking of match of clearing incomplete split
- cleanup incomplete split list after proceeding
All of this chages doesn't change on-disk storage, so backpatch...
But second point may be an issue for replaying logs from previous version.
delivering a well-randomized hash value. I got religion on this after
observing that performance of multi-batch hash join degrades terribly if the
higher-order bits of hash values aren't random, as indeed was true for say
hashes of small integer values. It's now expected and documented that hash
functions should use hash_any or some comparable method to ensure that all
bits of their output are about equally random.
initdb forced because this change invalidates existing hash indexes. For the
same reason, this isn't back-patchable; the hash join performance problem
will get a band-aid fix in the back branches.
fail when used in a deferred trigger. Bug goes back to 8.0; no doubt the
reason it hadn't been noticed is that we've been discouraging use of
user-defined constraint triggers. Per report from Frank van Vugt.
buffers, rather than blowing out the whole shared-buffer arena. Aside from
avoiding cache spoliation, this fixes the problem that VACUUM formerly tended
to cause a WAL flush for every page it modified, because we had it hacked to
use only a single buffer. Those flushes will now occur only once per
ring-ful. The exact ring size, and the threshold for seqscans to switch into
the ring usage pattern, remain under debate; but the infrastructure seems
done. The key bit of infrastructure is a new optional BufferAccessStrategy
object that can be passed to ReadBuffer operations; this replaces the former
StrategyHintVacuum API.
This patch also changes the buffer usage-count methodology a bit: we now
advance usage_count when first pinning a buffer, rather than when last
unpinning it. To preserve the behavior that a buffer's lifetime starts to
decrease when it's released, the clock sweep code is modified to not decrement
usage_count of pinned buffers.
Work not done in this commit: teach GiST and GIN indexes to use the vacuum
BufferAccessStrategy for vacuum-driven fetches.
Original patch by Simon, reworked by Heikki and again by Tom.
and aborted transactions have different effects; also teach it not to assume
that prepared transactions are always committed.
Along the way, simplify the pgstats API by tying counting directly to
Relations; I cannot detect any redeeming social value in having stats
pointers in HeapScanDesc and IndexScanDesc structures. And fix a few
corner cases in which counts might be missed because the relation's
pgstat_info pointer hadn't been set.
WAL records that shows whether it is safe to remove full-page images
(ie, whether or not an on-line backup was in progress when the WAL entry
was made). Also make provision for an XLOG_NOOP record type that can be
used to fill in the extra space when decompressing the data for restore.
This is the portion of Koichi Suzuki's "full page writes" patch that
has to go into the core database. The remainder of that work is two
external compression and decompression programs, which for the time being
will undergo separate development on pgfoundry. Per discussion.
Also, twiddle the handling of BTREE_SPLIT records to ensure it'll be
possible to compress them (the previous coding caused essential info
to be omitted). The other commonly-used record types seem OK already,
with the possible exception of GIN and GIST WAL records, which I don't
understand well enough to opine on.
to avoid losing useful Xid information in not-so-old tuples. This makes
CLUSTER behave the same as VACUUM as far a tuple-freezing behavior goes
(though CLUSTER does not yet advance the table's relfrozenxid).
While at it, move the actual freezing operation in rewriteheap.c to a more
appropriate place, and document it thoroughly. This part of the patch from
Tom Lane.
applied to live tuples older than a recent Xmin, not to tuples that may be part
of an update chain. Those still keep their original markings.
This patch makes it possible for CLUSTER to advance relfrozenxid, thus avoiding
the need of vacuuming the table for Xid wraparound purposes. That will be
patched separately.
Patch from Heikki Linnakangas.
pages it intends to zero immediately. Just to show there is some use for that
function besides WAL recovery :-).
Along the way, fold _hash_checkpage and _hash_pageinit calls into _hash_getbuf
and friends, instead of expecting callers to do that separately.
from the WAL data, don't bother to physically read it; just have bufmgr.c
return a zeroed-out buffer instead. This speeds recovery significantly,
and also avoids unnecessary failures when a page-to-be-overwritten has corrupt
page headers on disk. This replaces a former kluge that accomplished the
latter by pretending zero_damaged_pages was always ON during WAL recovery;
which was OK when the kluge was put in, but is unsafe when restoring a WAL
log that was written with full_page_writes off.
Heikki Linnakangas
from time_t to TimestampTz representation. This provides full gettimeofday()
resolution of the timestamps, which might be useful when attempting to
do point-in-time recovery --- previously it was not possible to specify
the stop point with sub-second resolution. But mostly this is to get
rid of TimestampTz-to-time_t conversion overhead during commit. Per my
proposal of a day or two back.
messages to the stats collector. This avoids the problem that enabling
stats_row_level for autovacuum has a significant overhead for short
read-only transactions, as noted by Arjen van der Meijden. We can avoid
an extra gettimeofday call by piggybacking on the one done for WAL-logging
xact commit or abort (although that doesn't help read-only transactions,
since they don't WAL-log anything).
In my proposal for this, I noted that we could change the WAL log entries
for commit/abort to record full TimestampTz precision, instead of only
time_t as at present. That's not done in this patch, but will be committed
separately.
is in progress on the same hashtable. This seems the least invasive way to
fix the recently-recognized problem that a split could cause the scan to
visit entries twice or (with much lower probability) miss them entirely.
The only field-reported problem caused by this is the "failed to re-find
shared lock object" PANIC in COMMIT PREPARED reported by Michel Dorochevsky,
which was caused by multiply visited entries. However, it seems certain
that mdsync() is vulnerable to missing required fsync's due to missed
entries, and I am fearful that RelationCacheInitializePhase2() might be at
risk as well. Because of that and the generalized hazard presented by this
bug, back-patch all the supported branches.
Along the way, fix pg_prepared_statement() and pg_cursor() to not assume
that the hashtables they are examining will stay static between calls.
This is risky regardless of the newly noted dynahash problem, because
hash_seq_search() has never promised to cope with deletion of table entries
other than the just-returned one. There may be no bug here because the only
supported way to call these functions is via ExecMakeTableFunctionResult()
which will cycle them to completion before doing anything very interesting,
but it seems best to get rid of the assumption. This affects 8.2 and HEAD
only, since those functions weren't there earlier.
failed (due to lock conflicts or out-of-space). We might have already
extended the index's filesystem EOF before failing, causing the EOF to be
beyond what the metapage says is the last used page. Hence the invariant
maintained by the code needs to be "EOF is at or beyond last used page",
not "EOF is exactly the last used page". Problem was created by my patch
of 2006-11-19 that attempted to repair bug #2737. Since that was
back-patched to 7.4, this needs to be as well. Per report and test case
from Vlastimil Krejcir.
(original code *always* created a full-page image for the left page, thus
leaving the intended savings unrealized), avoid risk of not having enough room
on the page during xlog restore, squeeze out another couple bytes in the xlog
record, clean up neglected comments.
index types can be reliably distinguished by examining the special space
on an index page. Per my earlier proposal, plus the realization that
there's no need for btree's vacuum cycle ID to cycle through every possible
16-bit value. Restricting its range a little costs nearly nothing and
eliminates the possibility of collisions.
Memo to self: remember to make bitmap indexes play along with this scheme,
assuming that patch ever gets accepted.
This commit breaks any code that assumes that the mere act of forming a tuple
(without writing it to disk) does not "toast" any fields. While all available
regression tests pass, I'm not totally sure that we've fixed every nook and
cranny, especially in contrib.
Greg Stark with some help from Tom Lane
are in their commit critical sections via flags in the ProcArray. Checkpoint
can watch the ProcArray to determine when it's safe to proceed. This is
a considerably better solution to the original problem of race conditions
between checkpoint and transaction commit: it speeds up commit, since there's
one less lock to fool with, and it prevents the problem of checkpoint being
delayed indefinitely when there's a constant flow of commits. Heikki, with
some kibitzing from Tom.
Add the latter to the values checked in pg_control, since it can't be changed
without invalidating toast table content. This commit in itself shouldn't
change any behavior, but it lays some necessary groundwork for experimentation
with these toast-control numbers.
Note: while TOAST_TUPLE_THRESHOLD can now be changed without initdb, some
thought still needs to be given to needs_toast_table() in toasting.c before
unleashing random changes.
will be released by transaction abort before _bt_end_vacuum gets called.
If either of these "can't happen" errors actually happened, we'd freeze up
trying to acquire an already-held lock. Latest word is that this does
not explain Martin Pitt's trouble report, but it still looks like a bug.
pointer" in every Snapshot struct. This allows removal of the case-by-case
tests in HeapTupleSatisfiesVisibility, which should make it a bit faster
(I didn't try any performance tests though). More importantly, we are no
longer violating portable C practices by assuming that small integers are
distinct from all pointer values, and HeapTupleSatisfiesDirty no longer
has a non-reentrant API involving side-effects on a global variable.
There were a couple of places calling HeapTupleSatisfiesXXX routines
directly rather than through the HeapTupleSatisfiesVisibility macro.
Since these places had to be changed anyway, I chose to make them go
through the macro for uniformity.
Along the way I renamed HeapTupleSatisfiesSnapshot to HeapTupleSatisfiesMVCC
to emphasize that it's only used with MVCC-type snapshots. I was sorely
tempted to rename HeapTupleSatisfiesVisibility to HeapTupleSatisfiesSnapshot,
but forebore for the moment to avoid confusion and reduce the likelihood that
this patch breaks some of the pending patches. Might want to reconsider
doing that later.
of a multi-statement simple-Query message. This bug goes all the way
back, but unfortunately is not nearly so easy to fix in existing releases;
it is only the recent ProcessUtility API change that makes it fixable in
HEAD. Per report from William Garrison.
module and teach PREPARE and protocol-level prepared statements to use it.
In service of this, rearrange utility-statement processing so that parse
analysis does not assume table schemas can't change before execution for
utility statements (necessary because we don't attempt to re-acquire locks
for utility statements when reusing a stored plan). This requires some
refactoring of the ProcessUtility API, but it ends up cleaner anyway,
for instance we can get rid of the QueryContext global.
Still to do: fix up SPI and related code to use the plan cache; I'm tempted to
try to make SQL functions use it too. Also, there are at least some aspects
of system state that we want to ensure remain the same during a replan as in
the original processing; search_path certainly ought to behave that way for
instance, and perhaps there are others.
Get rid of VARATT_SIZE and VARATT_DATA, which were simply redundant with
VARSIZE and VARDATA, and as a consequence almost no code was using the
longer names. Rename the length fields of struct varlena and various
derived structures to catch anyplace that was accessing them directly;
and clean up various places so caught. In itself this patch doesn't
change any behavior at all, but it is necessary infrastructure if we hope
to play any games with the representation of varlena headers.
Greg Stark and Tom Lane
I refactored findsplitloc and checksplitloc so that the division of
labor is more clear IMO. I pushed all the space calculation inside the
loop to checksplitloc.
I also fixed the off by 4 in free space calculation caused by
PageGetFreeSpace subtracting sizeof(ItemIdData), even though it was
harmless, because it was distracting and I felt it might come back to
bite us in the future if we change the page layout or alignments.
There's now a new function PageGetExactFreeSpace that doesn't do the
subtraction.
findsplitloc now tries the "just the new item to right page" split as
well. If people don't like the refactoring, I can write a patch to just
add that.
Heikki Linnakangas
continuously, and requests vacuum runs of "autovacuum workers" to postmaster.
The workers do the actual vacuum work. This allows for future improvements,
like allowing multiple autovacuum jobs running in parallel.
For now, the code keeps the original behavior of having a single autovac
process at any time by sleeping until the previous worker has finished.
keeping private state in each backend that has inserted and deleted the same
tuple during its current top-level transaction. This is sufficient since
there is no need to be able to determine the cmin/cmax from any other
transaction. This gets us back down to 23-byte headers, removing a penalty
paid in 8.0 to support subtransactions. Patch by Heikki Linnakangas, with
minor revisions by moi, following a design hashed out awhile back on the
pghackers list.
where possible, and fix some sites that apparently thought that fgets()
will overwrite the buffer by one byte.
Also add some strlcpy() to eliminate some weird memory handling.
> Currently, an index split writes all the data on the split page to
> WAL. That's a lot of WAL traffic. The tuples that are copied to the
> right page need to be WAL logged, but the tuples that stay on the
> original page don't.
Heikki Linnakangas
already collected in the current transaction; this allows plpgsql functions to
watch for stats updates even though they are confined to a single transaction.
Use this instead of the previous kluge involving pg_stat_file() to wait for
the stats collector to update in the stats regression test. Internally,
decouple storage of stats snapshots from transaction boundaries; they'll
now stick around until someone calls pgstat_clear_snapshot --- which xact.c
still does at transaction end, to maintain the previous behavior. This makes
the logic a lot cleaner, at the price of a couple dozen cycles per transaction
exit.
"database system is ready to accept connections", which is issued by the
postmaster when it really is ready to accept connections. Per proposal from
Markus Schiltknecht and subsequent discussion.
describe the maximum size of index tuples (which is typically AM-dependent
anyway); and consequently remove the bogus deduction for "special space"
that was built into it.
Adjust TOAST_TUPLE_THRESHOLD and TOAST_MAX_CHUNK_SIZE to avoid wasting two
bytes per toast chunk, and to ensure that the calculation correctly tracks any
future changes in page header size. The computation had been inaccurate in a
way that didn't cause any harm except space wastage, but future changes could
have broken it more drastically.
Fix the calculation of BTMaxItemSize, which was formerly computed as 1 byte
more than it could safely be. This didn't cause any harm in practice because
it's only compared against maxalign'd lengths, but future changes in the size
of page headers or btree special space could have exposed the problem.
initdb forced because of change in TOAST_MAX_CHUNK_SIZE, which alters the
storage of toast tables.
threshold for tuple length. On 4-byte-MAXALIGN machines, the toast code
creates tuples that have t_len exactly TOAST_TUPLE_THRESHOLD ... but this
number is not itself maxaligned, so if heap_insert maxaligns t_len before
comparing to TOAST_TUPLE_THRESHOLD, it'll uselessly recurse back to
tuptoaster.c, wasting cycles. (It turns out that this does not happen on
8-byte-MAXALIGN machines, because for them the outer MAXALIGN in the
TOAST_MAX_CHUNK_SIZE macro reduces TOAST_MAX_CHUNK_SIZE so that toast tuples
will be less than TOAST_TUPLE_THRESHOLD in size. That MAXALIGN is really
incorrect, but we can't remove it now, see below.) There isn't any particular
value in maxaligning before comparing to the thresholds, so just don't do
that, which saves a small number of cycles in itself.
These numbers should be rejiggered to minimize wasted space on toast-relation
pages, but we can't do that in the back branches because changing
TOAST_MAX_CHUNK_SIZE would force an initdb (by changing the contents of toast
tables). We can move the toast decision thresholds a bit, though, which is
what this patch effectively does.
Thanks to Pavan Deolasee for discovering the unintended recursion.
Back-patch into 8.2, but not further, pending more testing. (HEAD is about
to get a further patch modifying the thresholds, so it won't help much
for testing this form of the patch.)
Standard English uses "may", "can", and "might" in different ways:
may - permission, "You may borrow my rake."
can - ability, "I can lift that log."
might - possibility, "It might rain today."
Unfortunately, in conversational English, their use is often mixed, as
in, "You may use this variable to do X", when in fact, "can" is a better
choice. Similarly, "It may crash" is better stated, "It might crash".
In this case extractQuery should returns -1 as nentries. This changes
prototype of extractQuery method to use int32* instead of uint32* for
nentries argument.
Based on that gincostestimate may see two corner cases: nothing will be found
or seqscan should be used.
Per proposal at http://archives.postgresql.org/pgsql-hackers/2007-01/msg01581.php
PS tsearch_core patch should be sightly modified to support changes, but I'm
waiting a verdict about reviewing of tsearch_core patch.
Hashing for aggregation purposes still needs work, so it's not time to
mark any cross-type operators as hashable for general use, but these cases
work if the operators are so marked by hand in the system catalogs.
exactly at the point where we need to insert a new item, the calculation used
the wrong size for the "high key" of the new left page. This could lead to
choosing an unworkable split, resulting in "PANIC: failed to add item to the
left sibling" (or "right sibling") failure. Although this bug has been there
a long time, it's very difficult to trigger a failure before 8.2, since there
was generally a lot of free space on both sides of a chosen split. In 8.2,
where the user-selected fill factor determines how much free space the code
tries to leave, an unworkable split is much more likely. Report by Joe
Conway, diagnosis and fix by Heikki Linnakangas.
currentMarkData from IndexScanDesc to the opaque structs for the
AMs that need this information (currently gist and hash).
Patch from Heikki Linnakangas, fixes by Neil Conway.
accessing it, like DROP DATABASE. This allows the regression tests to pass
with autovacuum enabled, which open the gates for finally enabling autovacuum
by default.
hold true for operators in a btree operator family. This is mostly to
clarify my own thinking about what the planner can assume for optimization
purposes. (blowing dust off an old abstract-algebra textbook...)
management. The paper clearly describes many of the ideas embodied in
our current hashing code, but as far as I could find out there is not
a direct code heritage. (Mike Olsen recalls discussion of this paper
at Postgres meetings but believes it "informed the Postgres implementation
probably just at the design level". Margo herself says she wasn't
involved with Postgres' hash code.) Credit where credit is due 'n all
that, even if fifteen years after the fact.
per-column options for btree indexes. The planner's support for this is still
pretty rudimentary; it does not yet know how to plan mergejoins with
nondefault ordering options. The documentation is pretty rudimentary, too.
I'll work on improving that stuff later.
Note incompatible change from prior behavior: ORDER BY ... USING will now be
rejected if the operator is not a less-than or greater-than member of some
btree opclass. This prevents less-than-sane behavior if an operator that
doesn't actually define a proper sort ordering is selected.
having md.c return a success/failure boolean to smgr.c, which was just going
to elog anyway, let md.c issue the elog messages itself. This allows better
error reporting, particularly in cases such as "short read" or "short write"
which Peter was complaining of. Also, remove the kluge of allowing mdread()
to return zeroes from a read-beyond-EOF: this is now an error condition
except when InRecovery or zero_damaged_pages = true. (Hash indexes used to
require that behavior, but no more.) Also, enforce that mdwrite() is to be
used for rewriting existing blocks while mdextend() is to be used for
extending the relation EOF. This restriction lets us get rid of the old
ad-hoc defense against creating huge files by an accidental reference to
a bogus block number: we'll only create new segments in mdextend() not
mdwrite() or mdread(). (Again, when InRecovery we allow it anyway, since
we need to allow updates of blocks that were later truncated away.)
Also, clean up the original makeshift patch for bug #2737: move the
responsibility for padding relation segments to full length into md.c.
or contradictory keys even in cross-data-type scenarios. This is another
benefit of the opfamily rewrite: we can find the needed comparison
operators now.
cases. Operator classes now exist within "operator families". While most
families are equivalent to a single class, related classes can be grouped
into one family to represent the fact that they are semantically compatible.
Cross-type operators are now naturally adjunct parts of a family, without
having to wedge them into a particular opclass as we had done originally.
This commit restructures the catalogs and cleans up enough of the fallout so
that everything still works at least as well as before, but most of the work
needed to actually improve the planner's behavior will come later. Also,
there are not yet CREATE/DROP/ALTER OPERATOR FAMILY commands; the only way
to create a new family right now is to allow CREATE OPERATOR CLASS to make
one by default. I owe some more documentation work, too. But that can all
be done in smaller pieces once this infrastructure is in place.
in normal operation, and we can avoid rewriting pg_control at every log
segment switch if we don't insist that these values be valid. Reducing
the number of pg_control updates is a good idea for both performance and
reliability. It does make pg_resetxlog's life a bit harder, but that seems
a good tradeoff; and anyway the change to pg_resetxlog amounts to automating
something people formerly needed to do by hand, namely look at the existing
pg_xlog files to make sure the new WAL start point was past them.
In passing, change the wording of xlog.c's "database system was interrupted"
messages: describe the pg_control timestamp as "last known up at" rather than
implying it is the exact time of service interruption. With this change the
timestamp will generally be the time of the last checkpoint, which could be
many minutes before the failure; and we've already seen indications that
people tend to misinterpret the old wording.
initdb forced due to change in pg_control layout. Simon Riggs and Tom Lane
identify long-running transactions. Since we already need to record
the transaction-start time (e.g. for now()), we don't need any
additional system calls to report this information.
Catversion bumped, initdb required.
StartupXLOG and ShutdownXLOG no longer need to be critical sections, because
in all contexts where they are invoked, elog(ERROR) would be translated to
elog(FATAL) anyway. (One change in bgwriter.c is needed to make this true:
set ExitOnAnyError before trying to exit. This is a good fix anyway since
the existing code would have gone into an infinite loop on elog(ERROR) during
shutdown.) That avoids a misleading report of PANIC during semi-orderly
failures. Modify the postmaster to include the startup process in the set of
processes that get SIGTERM when a fast shutdown is requested, and also fix it
to not try to restart the bgwriter if the bgwriter fails while trying to write
the shutdown checkpoint. Net result is that "pg_ctl stop -m fast" does
something reasonable for a system in warm standby mode, and so should Unix
system shutdown (ie, universal SIGTERM). Per gripe from Stephen Harris and
some corner-case testing of my own.
remove page on next level linked from next inner page, ginScanToDelete()
wrongly sets parent page. Bug reveals when many item pointers from index
was deleted ( several hundred thousands).
Bug is discovered by hubert depesz lubaczewski <depesz@gmail.com>
Suppose, we need rc2 before release...
HeapTuple that is no longer allocated as a single palloc() block; if
used carelessly, this might result in a subsequent memory leak after
heap_freetuple().
AbortTransaction, which would lead to recursion and eventual PANIC exit
as illustrated in recent report from Jeff Davis. First, in xact.c create
a special dedicated memory context for AbortTransaction to run in. This
solves the problem as long as AbortTransaction doesn't need more than 32K
(or whatever other size we create the context with). But in corner cases
it might. Second, in trigger.c arrange to keep pending after-trigger event
records in separate contexts that can be freed near the beginning of
AbortTransaction, rather than having them persist until CleanupTransaction
as before. Third, in portalmem.c arrange to free executor state data
earlier as well. These two changes should result in backing off the
out-of-memory condition before AbortTransaction needs any significant
amount of memory, at least in typical cases such as memory overrun due
to too many trigger events or too big an executor hash table. And all
the same for subtransaction abort too, of course.
Windows), arrange for each postmaster child process to be its own process
group leader, and deliver signals SIGINT, SIGTERM, SIGQUIT to the whole
process group not only the direct child process. This provides saner behavior
for archive and recovery scripts; in particular, it's possible to shut down a
warm-standby recovery server using "pg_ctl stop -m immediate", since delivery
of SIGQUIT to the startup subprocess will result in killing the waiting
recovery_command. Also, this makes Query Cancel and statement_timeout apply
to scripts being run from backends via system(). (There is no support in the
core backend for that, but it's widely done using untrusted PLs.) Per gripe
from Stephen Harris and subsequent discussion.
preference for filling pages out-of-order tends to confuse the sanity checks
in md.c, as per report from Balazs Nagy in bug #2737. The fix is to ensure
that the smgr-level code always has the same idea of the logical EOF as the
hash index code does, by using ReadBuffer(P_NEW) where we are adding a single
page to the end of the index, and using smgrextend() to reserve a large batch
of pages when creating a new splitpoint. The patch is a bit ugly because it
avoids making any changes in md.c, which seems the most prudent approach for a
backpatchable beta-period fix. After 8.3 development opens, I'll take a look
at a cleaner but more invasive patch, in particular getting rid of the now
unnecessary hack to allow reading beyond EOF in mdread().
Backpatch as far as 7.4. The bug likely exists in 7.3 as well, but because
of the magnitude of the 7.3-to-7.4 changes in hash, the later-version patch
doesn't even begin to apply. Given the other known bugs in the 7.3-era hash
code, it does not seem worth trying to develop a separate patch for 7.3.
cases where we already hold the desired lock "indirectly", either via
membership in a MultiXact or because the lock was originally taken by a
different subtransaction of the current transaction. These cases must be
accounted for to avoid needless deadlocks and/or inappropriate replacement of
an exclusive lock with a shared lock. Per report from Clarence Gardner and
subsequent investigation.
30 seconds instead of retrying forever. Also modify xlog.c so that if
it fails to rename an old xlog segment up to a future slot, it will
unlink the segment instead. Per discussion of bug #2712, in which it
became apparent that Windows can handle unlinking a file that's being
held open, but not renaming it.
in PITR scenarios. We now WAL-log the replacement of old XIDs with
FrozenTransactionId, so that such replacement is guaranteed to propagate to
PITR slave databases. Also, rather than relying on hint-bit updates to be
preserved, pg_clog is not truncated until all instances of an XID are known to
have been replaced by FrozenTransactionId. Add new GUC variables and
pg_autovacuum columns to allow management of the freezing policy, so that
users can trade off the size of pg_clog against the amount of freezing work
done. Revise the already-existing code that forces autovacuum of tables
approaching the wraparound point to make it more bulletproof; also, revise the
autovacuum logic so that anti-wraparound vacuuming is done per-table rather
than per-database. initdb forced because of changes in pg_class, pg_database,
and pg_autovacuum catalogs. Heikki Linnakangas, Simon Riggs, and Tom Lane.
deletion code to avoid the case where an upper-level btree page remains "half
dead" for a significant period of time, and to block insertions into a key
range that is in process of being re-assigned to the right sibling of the
deleted page's parent. This prevents the scenario reported by Ed L. wherein
index keys could become out-of-order in the grandparent index level.
Since this is a moderately invasive fix, I'm applying it only to HEAD.
The bug exists back to 7.4, but the back branches will get a different patch.
that conflict with the OID that we want to use for the new database.
This avoids the risk of trying to remove files that maybe we shouldn't
remove. Per gripe from Jon Lapham and subsequent discussion of 27-Sep.
remaining functions, simplify pglz_compress's API to not require a useless
data copy when compression fails. Also add a check in pglz_decompress that
the expected amount of data was decompressed.
static variables. This avoids any risk of potential non-reentrancy,
and in particular offers a much cleaner workaround for the Intel compiler
bug that was affecting ginutil.c.
even when a single relation requires more than max_fsm_pages pages. Also,
make VACUUM emit a warning in this case, since it likely means that VACUUM
FULL or other drastic corrective measure is needed. Per reports from Jeff
Frost and others of unexpected changes in the claimed max_fsm_pages need.
we probably should make them work reliably for all arrays. Fix code
to handle NULLs and multidimensional arrays, move it into arrayfuncs.c.
GIN is still restricted to indexing arrays with no null elements, however.
agreed these symbols are less easily confused. I made new pg_operator
entries (with new OIDs) for the old names, so as to provide backward
compatibility while making it pretty easy to remove the old names in
some future release cycle. This commit only touches the core datatypes,
contrib will be fixed separately.
PGPROC array into snapshots, and use this information to avoid visits
to pg_subtrans in HeapTupleSatisfiesSnapshot. This appears to solve
the pg_subtrans-related context swap storm problem that's been reported
by several people for 8.1. While at it, modify GetSnapshotData to not
take an exclusive lock on ProcArrayLock, as closer analysis shows that
shared lock is always sufficient.
Itagaki Takahiro and Tom Lane
on the same index page; we can avoid data copying as well as buffer refcount
manipulations in this common case. Makes for a small but noticeable
improvement in mergejoin speed.
Heikki Linnakangas
of the transaction ID counter. Nothing is done with the epoch except to
store it in checkpoint records, but this provides a foundation with which
add-on code can pretend that XIDs never wrap around. This is a severely
trimmed and rewritten version of the xxid patch submitted by Marko Kreen.
Per discussion, the epoch counter seems the only part of xxid that really
needs to be in the core server.
the rel, it's easy to get rid of the narrow race-condition window that
used to exist in VACUUM and CLUSTER. Did some minor code-beautification
work in the same area, too.
than N seconds apart. This allows a simple, if not very high performance,
means of guaranteeing that a PITR archive is no more than N seconds behind
real time. Also make pg_current_xlog_location return the WAL Write pointer,
add pg_current_xlog_insert_location to return the Insert pointer, and fix
pg_xlogfile_name_offset to return its results as a two-element record instead
of a smashed-together string, as per recent discussion.
Simon Riggs
plpgsql support to come later. Along the way, convert execMain's
SELECT INTO support into a DestReceiver, in order to eliminate some ugly
special cases.
Jonah Harris and Tom Lane
operation every so often. This improves the usefulness of PITR log
shipping for hot standby: formerly, if the standby server crashed, it
was necessary to restart it from the last base backup and replay all
the WAL since then. Now it will only need to reread about the same
amount of WAL as the master server would. The behavior might also
come in handy during a long PITR replay sequence. Simon Riggs,
with some editorialization by Tom Lane.
to happen automatically during pg_stop_backup(). Add some functions for
interrogating the current xlog insertion point and for easily extracting
WAL filenames from the hex WAL locations displayed by pg_stop_backup
and friends. Simon Riggs with some editorialization by Tom Lane.
(table or index) before trying to open its relcache entry. This fixes
race conditions in which someone else commits a change to the relation's
catalog entries while we are in process of doing relcache load. Problems
of that ilk have been reported sporadically for years, but it was not
really practical to fix until recently --- for instance, the recent
addition of WAL-log support for in-place updates helped.
Along the way, remove pg_am.amconcurrent: all AMs are now expected to support
concurrent update.
vacuums. This allows a OLTP-like system with big tables to continue
regular vacuuming on small-but-frequently-updated tables while the
big tables are being vacuumed.
Original patch from Hannu Krossing, rewritten by Tom Lane and updated
by me.
When we are about to split an index page to do an insertion, first look
to see if any entries marked LP_DELETE exist on the page, and if so remove
them to try to make enough space for the desired insert. This should reduce
index bloat in heavily-updated tables, although of course you still need
VACUUM eventually to clean up the heap.
Junji Teramoto
recovery. In the first place, it doesn't work because slru's
latest_page_number isn't set up yet (this is why we've been hearing reports
of strange "apparent wraparound" log messages during crash recovery, but
only from people who'd managed to advance their next-mxact counters some
considerable distance from 0). In the second place, it seems a bit unwise
to be throwing away data during crash recovery anwyway. This latter
consideration convinces me to just disable truncation during recovery,
rather than computing latest_page_number and pushing ahead.
variable (this accounts for regression failures on PPC64, and in fact
won't work on any big-endian machine). Get rid of hardwired knowledge
about datum size rules; make it look just like datumCopy().
I'm going to insist on reversion of this entire patch unless pgrminclude
is upgraded to a less broken state, but in the meantime let's get contrib
passing regression again.
it can handle small fillfactors for ordinary-sized index entries without
failing on large ones; fix nbtinsert.c to distinguish leaf and nonleaf
pages; change the minimum fillfactor to 10% for all index types.
- Replace sorted array of entries in maintenance_work_mem to binary tree,
this should improve create performance.
- More precisely calculate allocated memory, eliminate leaks
with user-defined extractValue()
- Improve wordings in tsearch2
To this end, add a couple of columns to pg_class, relminxid and relvacuumxid,
based on which we calculate the pg_database columns after each vacuum.
We now force all databases to be vacuumed, even template ones. A backend
noticing too old a database (meaning pg_database.datminxid is in danger of
falling behind Xid wraparound) will signal the postmaster, which in turn will
start an autovacuum iteration to process the offending database. In principle
this is only there to cope with frozen (non-connectable) databases without
forcing users to set them to connectable, but it could force regular user
database to go through a database-wide vacuum at any time. Maybe we should
warn users about this somehow. Of course the real solution will be to use
autovacuum all the time ;-)
There are some additional improvements we could have in this area: for example
the vacuum code could be smarter about not updating pg_database for each table
when called by autovacuum, and do it only once the whole autovacuum iteration
is done.
I updated the system catalogs documentation, but I didn't modify the
maintenance section. Also having some regression tests for this would be nice
but it's not really a very straightforward thing to do.
Catalog version bumped due to system catalog changes.
discussion (including making def_arg allow reserved words), add missed
opt_definition for UNIQUE case. Put the reloptions support code in a less
random place (I chose to make a new file access/common/reloptions.c).
Eliminate header inclusion creep. Make the index options functions safely
user-callable (seems like client apps might like to be able to test validity
of options before trying to make an index). Reduce overhead for normal case
with no options by allowing rd_options to be NULL. Fix some unmaintainably
klugy code, including getting rid of Natts_pg_class_fixed at long last.
Some stylistic cleanup too, and pay attention to keeping comments in sync
with code.
Documentation still needs work, though I did fix the omissions in
catalogs.sgml and indexam.sgml.
* new split algorithm (as proposed in http://archives.postgresql.org/pgsql-hackers/2006-06/msg00254.php)
* possible call pickSplit() for second and below columns
* add spl_(l|r)datum_exists to GIST_SPLITVEC -
pickSplit should check its values to use already defined
spl_(l|r)datum for splitting. pickSplit should set
spl_(l|r)datum_exists to 'false' (if they was 'true') to
signal to caller about using spl_(l|r)datum.
* support for old pickSplit(): not very optimal
but correct split
* remove 'bytes' field from GISTENTRY: in any case size of
value is defined by it's type.
* split GIST_SPLITVEC to two structures: one for using in picksplit
and second - for internal use.
* some code refactoring
* support of subsplit to rtree opclasses
TODO: add support of subsplit to contrib modules
this someday, but right now it seems that posix_fadvise is immature to
the point of being broken on many platforms ... and we don't have any
benchmark evidence proving it's worth spending time on.
per-tuple space overhead for sorts in memory. I chose to replace the
previous patch that tried to write out the bare minimum amount of data
when sorting on disk; instead, just dump the MinimalTuples as-is. This
wastes 3 to 10 bytes per tuple depending on architecture and null-bitmap
length, but the simplification in the writetup/readtup routines seems
worth it.
tuples with less header overhead than a regular HeapTuple, per my
recent proposal. Teach TupleTableSlot code how to deal with these.
As proof of concept, change tuplestore.c to store MinimalTuples instead
of HeapTuples. Future patches will expand the concept to other places
where it is useful.
changing semantics too much. statement_timestamp is now set immediately
upon receipt of a client command message, and the various places that used
to do their own gettimeofday() calls to mark command startup are referenced
to that instead. I have also made stats_command_string use that same
value for pg_stat_activity.query_start for both the command itself and
its eventual replacement by <IDLE> or <idle in transaction>. There was
some debate about that, but no argument that seemed convincing enough to
justify an extra gettimeofday() call.
for it. Hopefully will fix core dump evidenced by some buildfarm members
since fadvise patch went in. The actual definition of the function is not
ABI-compatible with compiler's default assumption in the absence of any
declaration, so it's clearly unsafe to try to call it without seeing a
declaration.
by creating a reference-count mechanism, similar to what we did a long time
ago for catcache entries. The back branches have an ugly solution involving
lots of extra copies, but this way is more efficient. Reference counting is
only applied to tupdescs that are actually in caches --- there seems no need
to use it for tupdescs that are generated in the executor, since they'll go
away during plan shutdown by virtue of being in the per-query memory context.
Neil Conway and Tom Lane
* some refactoring and simplify code int gistutil.c and gist.c
* now in some cases it can be called used-defined
picksplit method for non-first column in index, but here
is a place to do more.
* small fix of docs related to support NULL.
sections now isn't nested. All user-defined functions now is
called outside critsections. Small improvements in WAL
protocol.
TODO: improve XLOG replay
(relpages/reltuples). To do this, create formal support in heapam.c for
"overwrite" tuple updates (including xlog replay capability) and use that
instead of the ad-hoc overwrites we'd been using in VACUUM and CREATE INDEX.
Take the responsibility for updating stats during CREATE INDEX out of the
individual index AMs, and do it where it belongs, in catalog/index.c. Aside
from being more modular, this avoids having to update the same tuple twice in
some paths through CREATE INDEX. It's probably not measurably faster, but
for sure it's a lot cleaner than before.
into a single mostly-physical-order scan of the index. This requires some
ticklish interlocking considerations, but should create no material
performance impact on normal index operations (at least given the
already-committed changes to make scans work a page at a time). VACUUM
itself should get significantly faster in any index that's degenerated to a
very nonlinear page order. Also, we save one pass over the index entirely,
except in the case where there were no deletions to do and so only one pass
happened anyway.
Original patch by Heikki Linnakangas, rework by Tom Lane.
btgettuple and btgetmulti). This eliminates the problem of "re-finding" the
exact stopping point, since the stopping point is effectively always a page
boundary, and index items are never moved across pre-existing page boundaries.
A small penalty is that the keys_are_unique optimization is effectively
disabled (and, therefore, is removed in this patch), causing us to apply
_bt_checkkeys() to at least one more tuple than necessary when looking up a
unique key. However, the advantages for non-unique cases seem great enough to
accept this tradeoff. Aside from simplifying and (sometimes) speeding up the
indexscan code, this will allow us to reimplement btbulkdelete as a largely
sequential scan instead of index-order traversal, thereby significantly
reducing the cost of VACUUM. Those changes will come in a separate patch.
Original patch by Heikki Linnakangas, rework by Tom Lane.
This formulation requires every AM to provide amvacuumcleanup, unlike before,
but it's surely a whole lot cleaner. Also, add an 'amstorage' column to
pg_am so that we can get rid of hardwired knowledge in DefineOpClass().
thereby saving a visit to the metapage in most index searches/updates.
This wouldn't actually save any I/O (since in the old regime the metapage
generally stayed in cache anyway), but it does provide a useful decrease
in bufmgr traffic in high-contention scenarios. Per my recent proposal.
transaction_timestamp() (just like now()).
Also update statement_timeout() to mention it is statement arrival time
that is measured.
Catalog version updated.
whenever we start to read within that file. The first page carries
extra identification information that really ought to be checked, but
as the code stood, this was only checked when we switched sequentially
into a new WAL file, or if by chance the starting checkpoint record was
within the first page. This patch ensures that we will detect bogus
'long header' information before we start replaying the WAL sequence.
to occur between pg_start_backup() and pg_stop_backup(), even if the GUC
setting full_page_writes is OFF. Per discussion, doing this in combination
with the already-existing checkpoint during pg_start_backup() should ensure
safety against partial page updates being included in the backup. We do
not have to force full page writes to occur during normal PITR operation,
as I had first feared.
update no-longer-existing pages to fall through as no-ops, but make a note
of each page number referenced by such records. If we don't see a later
XLOG entry dropping the table or truncating away the page, complain at
the end of XLOG replay. Since this fixes the known failure mode for
full_page_writes = off, revert my previous band-aid patch that disabled
that GUC variable.
upper-level insertion completes a previously-seen split, we cannot simply grab
the downlink block number out of the buffer, because the buffer could contain
a later state of the page --- or perhaps the page doesn't even exist at all
any more, due to relation truncation. These possibilities have been masked up
to now because the use of full_page_writes effectively ensured that no xlog
replay routine ever actually saw a page state newer than its own change.
Since we're deprecating full_page_writes in 8.1.*, there's no need to fix this
in existing release branches, but we need a fix in HEAD if we want to have any
hope of re-allowing full_page_writes. Accordingly, adjust the contents of
btree WAL records so that we can always get the downlink block number from the
WAL record rather than having to depend on buffer contents. Per report from
Kevin Grittner and Peter Brant.
Improve a few comments in related code while at it.
that apply the necessary domain constraint checks immediately. This fixes
cases where domain constraints went unchecked for statement parameters,
PL function local variables and results, etc. We can also eliminate existing
special cases for domains in places that had gotten it right, eg COPY.
Also, allow domains over domains (base of a domain is another domain type).
This almost worked before, but was disallowed because the original patch
hadn't gotten it quite right.
XLOG_BLCKSZ. This ought to help in preventing configuration mismatch
problems if anyone tries to ship PITR files between servers compiled
with different XLOG_BLCKSZ settings. Simon Riggs
instead a dedicated symbol. This probably makes no functional difference
for likely values of BLCKSZ, but it makes the intent clearer.
Simon Riggs, minor editorialization by Tom Lane.
functions are not strict, they will be called (passing a NULL first parameter)
during any attempt to input a NULL value of their datatype. Currently, all
our input functions are strict and so this commit does not change any
behavior. However, this will make it possible to build domain input functions
that centralize checking of domain constraints, thereby closing numerous holes
in our domain support, as per previous discussion.
While at it, I took the opportunity to introduce convenience functions
InputFunctionCall, OutputFunctionCall, etc to use in code that calls I/O
functions. This eliminates a lot of grotty-looking casts, but the main
motivation is to make it easier to grep for these places if we ever need
to touch them again.
used within WAL files. Historically this was the same as the data file
BLCKSZ, but there's no necessary connection, and it's possible that
performance gains might ensue from reducing XLOG_BLCKSZ. In any case
distinguishing two symbols should improve code clarity. This commit
does not actually change the page size, only provide the infrastructure
to make it possible to do so. initdb forced because of addition of a
field to pg_control.
Mark Wong, with some help from Simon Riggs and Tom Lane.
incrementally by successive inserts rather than by sorting the data.
We were only using the slow path during bootstrap, apparently because
when first written it failed during bootstrap --- but it works fine now
AFAICT. Removing it saves a hundred or so lines of code and produces
noticeably (~10%) smaller initial states of the system catalog indexes.
While that won't make much difference for heavily-modified catalogs,
for the more static ones there may be a useful long-term performance
improvement.
misleadingly-named WriteBuffer routine, and instead require routines that
change buffer pages to call MarkBufferDirty (which does exactly what it says).
We also require that they do so before calling XLogInsert; this takes care of
the synchronization requirement documented in SyncOneBuffer. Note that
because bufmgr takes the buffer content lock (in shared mode) while writing
out any buffer, it doesn't matter whether MarkBufferDirty is executed before
the buffer content change is complete, so long as the content change is
completed before releasing exclusive lock on the buffer. So it's OK to set
the dirtybit before we fill in the LSN.
This eliminates the former kluge of needing to set the dirtybit in LockBuffer.
Aside from making the code more transparent, we can also add some new
debugging assertions, in particular that the caller of MarkBufferDirty must
hold the buffer content lock, not merely a pin.
torn-page problems. This introduces some issues of its own, mainly
that there are now some critical sections of unreasonably broad scope,
but it's a step forward anyway. Further cleanup will require some
code refactoring that I'd prefer to get Oleg and Teodor involved in.
This commit doesn't make much functional change, but it does eliminate some
duplicated code --- for instance, PageIsNew tests are now done inside
XLogReadBuffer rather than by each caller.
The GIST xlog code still needs a lot of love, but I'll worry about that
separately.
failures even when the hardware and OS did nothing wrong. Per recent analysis
of a problem report from Alex Bahdushka.
For the moment I've just diked out the test of the parameter, rather than
removing the GUC infrastructure and documentation, in case we conclude that
there's something salvageable there. There seems no chance of it being
resurrected in the 8.1 branch though.
passed extend = true whenever we are reading a page we intend to reinitialize
completely, even if we think the page "should exist". This is because it
might indeed not exist, if the relation got truncated sometime after the
current xlog record was made and before the crash we're trying to recover
from. These two thinkos appear to explain both of the old bug reports
discussed here:
http://archives.postgresql.org/pgsql-hackers/2005-05/msg01369.php
when an error occurs during xlog replay. Also, replace the former risky
'write into a fixed-size buffer with no overflow detection' API for XLOG
record description routines; use an expansible StringInfo instead. (The
latter accounts for most of the patch bulk.)
Qingqing Zhou
The original coding stored the raw parser output (ColumnDef and TypeName
nodes) which was ugly, bulky, and wrong because it failed to create any
dependency on the referenced datatype --- and in fact would not track type
renamings and suchlike. Instead store a list of column type OIDs in the
RTE.
Also fix up general failure of recordDependencyOnExpr to do anything sane
about recording dependencies on datatypes. While there are many cases where
there will be an indirect dependency (eg if an operator returns a datatype,
the dependency on the operator is enough), we do have to record the datatype
as a separate dependency in examples like CoerceToDomain.
initdb forced because of change of stored rules.
during parse analysis, not only errors detected in the flex/bison stages.
This is per my earlier proposal. This commit includes all the basic
infrastructure, but locations are only tracked and reported for errors
involving column references, function calls, and operators. More could
be done later but this seems like a good set to start with. I've also
moved the ReportSyntaxErrorPosition logic out of psql and into libpq,
which should make it available to more people --- even within psql this
is an improvement because warnings weren't handled by ReportSyntaxErrorPosition.
more compliant with the error message style guide. In particular,
errdetail should begin with a capital letter and end with a period,
whereas errmsg should not. I also fixed a few related issues in
passing, such as fixing the repeated misspelling of "lexeme" in
contrib/tsearch2 (per Tom's suggestion).
possible ScanDirection alternatives rather than magic numbers
(-1, 0, 1). Also, use the ScanDirection macros in a few places
rather than directly checking whether `dir == ForwardScanDirection'
and the like. Per patch from James William Pye. His patch also
changed ScanDirection to be a "char" rather than an enum, which
I haven't applied.
we are not holding a buffer content lock; where it was, InterruptHoldoffCount
is positive and so we'd not respond to cancel signals as intended. Also
add missing vacuum_delay_point() call in btvacuumcleanup. This should fix
complaint from Evgeny Gridasov about failure to respond to SIGINT/SIGTERM
in a timely fashion (bug #2257).
during the vacuumcleanup scan that we're going to do anyway. Should
save a few cycles (one calculation per page, not per tuple) as well
as not having to depend on assumptions about heap and index being
in step.
I think this could probably be made to work for GIST too, but that
code looks messy enough that I'm disinclined to try right now.
partial. None of the existing AMs do anything useful except counting
tuples when there's nothing to delete, and we can get a tuple count
from the heap as long as it's not a partial index. (hash actually can
skip anyway because it maintains a tuple count in the index metapage.)
GIST is not currently able to exploit this optimization because, due to
failure to index NULLs, GIST is always effectively partial. Possibly
we should fix that sometime.
Simon Riggs w/ some review by Tom Lane.
just refer to btree index entries as plain IndexTuples, which is what
they have been for a very long time. This is mostly just an exercise
in removing extraneous notation, but it does save a palloc/pfree cycle
per index insertion.
and non-required keys in a btree index scan, mark the required scankeys
with private flag bits SK_BT_REQFWD and/or SK_BT_REQBKWD. This seems
at least marginally clearer to me, and it eliminates a wired-into-the-
data-structure assumption that required keys are consecutive. Even though
that assumption will remain true for the foreseeable future, having it
in there makes the code seem more complex than necessary.
to try to create a log segment file concurrently, but the code erroneously
specified O_EXCL to open(), resulting in a needless failure. Before 7.4,
it was even a PANIC condition :-(. Correct code is actually simpler than
what we had, because we can just say O_CREAT to start with and not need a
second open() call. I believe this accounts for several recent reports of
hard-to-reproduce "could not create file ...: File exists" errors in both
pg_clog and pg_subtrans.
