misleadingly-named WriteBuffer routine, and instead require routines that
change buffer pages to call MarkBufferDirty (which does exactly what it says).
We also require that they do so before calling XLogInsert; this takes care of
the synchronization requirement documented in SyncOneBuffer. Note that
because bufmgr takes the buffer content lock (in shared mode) while writing
out any buffer, it doesn't matter whether MarkBufferDirty is executed before
the buffer content change is complete, so long as the content change is
completed before releasing exclusive lock on the buffer. So it's OK to set
the dirtybit before we fill in the LSN.
This eliminates the former kluge of needing to set the dirtybit in LockBuffer.
Aside from making the code more transparent, we can also add some new
debugging assertions, in particular that the caller of MarkBufferDirty must
hold the buffer content lock, not merely a pin.
we are not holding a buffer content lock; where it was, InterruptHoldoffCount
is positive and so we'd not respond to cancel signals as intended. Also
add missing vacuum_delay_point() call in btvacuumcleanup. This should fix
complaint from Evgeny Gridasov about failure to respond to SIGINT/SIGTERM
in a timely fashion (bug #2257).
during the vacuumcleanup scan that we're going to do anyway. Should
save a few cycles (one calculation per page, not per tuple) as well
as not having to depend on assumptions about heap and index being
in step.
I think this could probably be made to work for GIST too, but that
code looks messy enough that I'm disinclined to try right now.
partial. None of the existing AMs do anything useful except counting
tuples when there's nothing to delete, and we can get a tuple count
from the heap as long as it's not a partial index. (hash actually can
skip anyway because it maintains a tuple count in the index metapage.)
GIST is not currently able to exploit this optimization because, due to
failure to index NULLs, GIST is always effectively partial. Possibly
we should fix that sometime.
Simon Riggs w/ some review by Tom Lane.
just refer to btree index entries as plain IndexTuples, which is what
they have been for a very long time. This is mostly just an exercise
in removing extraneous notation, but it does save a palloc/pfree cycle
per index insertion.
_bt_checkkeys(), instead of checking it in the top-level nbtree.c routines
as formerly. This saves a little bit of loop overhead, but more importantly
it lets us skip performing the index key comparisons for dead tuples.
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
on every index page they read; in particular to catch the case of an
all-zero page, which PageHeaderIsValid allows to pass. It turns out
hash already had this idea, but it was just Assert()ing things rather
than doing a straight error check, and the Asserts were partially
redundant with PageHeaderIsValid anyway. Per recent failure example
from Jim Nasby. (gist still needs the same treatment.)
on a page, as suggested by ITAGAKI Takahiro. Also, change a few places
that were using some other estimates of max-items-per-page to consistently
use MaxOffsetNumber. This is conservatively large --- we could have used
the new MaxHeapTuplesPerPage macro, or a similar one for index tuples ---
but those places are simply declaring a fixed-size buffer and assuming it
will work, rather than actively testing for overrun. It seems safer to
size these buffers in a way that can't overflow even if the page is
corrupt.
methods: they all invoke UpdateStats() since they have computed the
number of heap tuples, so I created a function in catalog/index.c that
each AM now calls.
and VACUUM: in the interval between adding a new page to the relation
and formatting it, it was possible for VACUUM to come along and decide
it should format the page too. Though not harmful in itself, this would
cause data loss if a third transaction were able to insert tuples into
the vacuumed page before the original extender got control back.
which is neither needed by nor related to that header. Remove the bogus
inclusion and instead include the header in those C files that actually
need it. Also fix unnecessary inclusions and bad inclusion order in
tsearch2 files.
access: define new index access method functions 'amgetmulti' that can
fetch multiple TIDs per call. (The functions exist but are totally
untested as yet.) Since I was modifying pg_am anyway, remove the
no-longer-needed 'rel' parameter from amcostestimate functions, and
also remove the vestigial amowner column that was creating useless
work for Alvaro's shared-object-dependencies project.
Initdb forced due to changes in pg_am.
convention for isnull flags. Also, remove the useless InsertIndexResult
return struct from index AM aminsert calls --- there is no reason for
the caller to know where in the index the tuple was inserted, and we
were wasting a palloc cycle per insert to deliver this uninteresting
value (plus nontrivial complexity in some AMs).
I forced initdb because of the change in the signature of the aminsert
routines, even though nothing really looks at those pg_proc entries...
to write out data that we are about to tell the filesystem to drop.
smgr_internal_unlink already had a DropRelFileNodeBuffers call to
get rid of dead buffers without a write after it's no longer possible
to roll back the deleting transaction. Adding a similar call in
smgrtruncate simplifies callers and makes the overall division of
labor clearer. This patch removes the former behavior that VACUUM
would write all dirty buffers of a relation unconditionally.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
a relation's number of blocks, rather than the possibly-obsolete value
in pg_class.relpages. Scale the value in pg_class.reltuples correspondingly
to arrive at a hopefully more accurate number of rows. When pg_class
contains 0/0, estimate a tuple width from the column datatypes and divide
that into current file size to estimate number of rows. This improved
methodology allows us to jettison the ancient hacks that put bogus default
values into pg_class when a table is first created. Also, per a suggestion
from Simon, make VACUUM (but not VACUUM FULL or ANALYZE) adjust the value
it puts into pg_class.reltuples to try to represent the mean tuple density
instead of the minimal density that actually prevails just after VACUUM.
These changes alter the plans selected for certain regression tests, so
update the expected files accordingly. (I removed join_1.out because
it's not clear if it still applies; we can add back any variant versions
as they are shown to be needed.)
Rather than using ReadBuffer() to increment the reference count on an
already-pinned buffer, we should use IncrBufferRefCount() as it is
faster and does not require acquiring the BufMgrLock.
keep track of portal-related resources separately from transaction-related
resources. This allows cursors to work in a somewhat sane fashion with
nested transactions. For now, cursor behavior is non-subtransactional,
that is a cursor's state does not roll back if you abort a subtransaction
that fetched from the cursor. We might want to change that later.
locking conflict against concurrent CHECKPOINT that was discussed a few
weeks ago. Also, if not using WAL archiving (which is always true ATM
but won't be if PITR makes it into this release), there's no need to
WAL-log the index build process; it's sufficient to force-fsync the
completed index before commit. This seems to gain about a factor of 2
in my tests, which is consistent with writing half as much data. I did
not try it with WAL on a separate drive though --- probably the gain would
be a lot less in that scenario.
rather than an error code, and does elog(ERROR) not elog(WARNING)
when it detects a problem. All callers were simply elog(ERROR)'ing on
failure return anyway, and I find it hard to envision a caller that would
not, so we may as well simplify the callers and produce the more useful
error message directly.
costing us lots more to maintain than it was worth. On shared tables
it was of exactly zero benefit because we couldn't trust it to be
up to date. On temp tables it sometimes saved an lseek, but not often
enough to be worth getting excited about. And the real problem was that
we forced an lseek on every relcache flush in order to update the field.
So all in all it seems best to lose the complexity.
the next are handled by ReleaseAndReadBuffer rather than separate
ReleaseBuffer and ReadBuffer calls. This cuts the number of acquisitions
of the BufMgrLock by a factor of 2 (possibly more, if an indexscan happens
to pull successive rows from the same heap page). Unfortunately this
doesn't seem enough to get us out of the recently discussed context-switch
storm problem, but it's surely worth doing anyway.
subroutine in src/port/pgsleep.c. Remove platform dependencies from
miscadmin.h and put them in port.h where they belong. Extend recent
vacuum cost-based-delay patch to apply to VACUUM FULL, ANALYZE, and
non-btree index vacuuming.
By the way, where is the documentation for the cost-based-delay patch?
the relcache, and so the notion of 'blind write' is gone. This should
improve efficiency in bgwriter and background checkpoint processes.
Internal restructuring in md.c to remove the not-very-useful array of
MdfdVec objects --- might as well just use pointers.
Also remove the long-dead 'persistent main memory' storage manager (mm.c),
since it seems quite unlikely to ever get resurrected.
Make btree index creation and initial validation of foreign-key constraints
use maintenance_work_mem rather than work_mem as their memory limit.
Add some code to guc.c to allow these variables to be referenced by their
old names in SHOW and SET commands, for backwards compatibility.
pointer type when it is not necessary to do so.
For future reference, casting NULL to a pointer type is only necessary
when (a) invoking a function AND either (b) the function has no prototype
OR (c) the function is a varargs function.
pghackers proposal of 8-Nov. All the existing cross-type comparison
operators (int2/int4/int8 and float4/float8) have appropriate support.
The original proposal of storing the right-hand-side datatype as part of
the primary key for pg_amop and pg_amproc got modified a bit in the event;
it is easier to store zero as the 'default' case and only store a nonzero
when the operator is actually cross-type. Along the way, remove the
long-since-defunct bigbox_ops operator class.
invalid (has the wrong magic number) until the build is entirely
complete. This turns out to cost no additional writes in the normal
case, since we were rewriting the metapage at the end of the process
anyway. In normal scenarios there's no real gain in security, because
a failed index build would roll back the transaction leaving an unused
index file, but for rebuilding shared system indexes this seems to add
some useful protection.
NULL key pointer, indicating that the existing scan key should be reused.
This behavior isn't used yet but will be needed for my planned fix to
the keys_are_unique code.
Adjustable threshold is gone in favor of keeping track of total requested
page storage and doling out proportional fractions to each relation
(with a minimum amount per relation, and some quantization of the results
to avoid thrashing with small changes in page counts). Provide special-
case code for indexes so as not to waste space storing useless page
free space counts. Restructure internal data storage to be a flat array
instead of list-of-chunks; this may cost a little more work in data
copying when reorganizing, but allows binary search to be used during
lookup_fsm_page_entry().
end of a btree index. This isn't super-effective, since we won't move
nondeletable pages, but it's better than nothing. Also, improve stats
displayed during VACUUM VERBOSE.
deleting multiple index entries on a single index page. This makes for
a very substantial reduction in the amount of WAL traffic during a
large delete operation.
now knows what to do upon hitting a dead page (in theory anyway, it's
untested...). Add a post-VACUUM-cleanup entry point for index AMs, to
provide a place for dead-page scavenging to happen.
Also, fix oversight that broke btpo_prev links in temporary indexes.
initdb forced due to additions in pg_am.
support btree compaction, as per proposal of a few days ago. btree index
pages no longer store parent links, instead they have a level indicator
(counting up from zero for leaf pages). The FixBTree recovery logic is
removed, and replaced by code that detects missing parent-level insertions
during WAL replay. Also, generate appropriate WAL entries when updating
btree metapage and when building a btree index from scratch. I believe
btree indexes are now completely WAL-legal for the first time.
initdb forced due to index and WAL changes.
