Presently, frontend code that needs to use these macros must either
include storage/fd.h, which declares several frontend-unsafe
functions, or duplicate the macros. This commit moves these macros
to common/file_utils.h, which is safe for both frontend and backend
code. Consequently, we can also remove the duplicated macros in
pg_checksums and stop including storage/fd.h in pg_rewind.
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/ZOP5qoUualu5xl2Z%40paquier.xyz
Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/20230428092545.qfb3y5wcu4cm75ur@alvherre.pgsql
This fixes many spelling mistakes in comments, but a few references to
invalid parameter names, function names and option names too in comments
and also some in string constants
Also, fix an #undef that was undefining the incorrect definition
Author: Alexander Lakhin
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/d5f68d19-c0fc-91a9-118d-7c6a5a3f5fad@gmail.com
The functions that follow are concerned with various things, of
which the tar format is only one, so this comment doesn't really
seem helpful. The file isn't really divided into sections in the
way that this comment seems to contemplate -- or at least, not
any more.
Patch by me, reviewed by Michael Paquier.
Discussion: http://postgr.es/m/CA+TgmoZ_fFAoU6mrHt9QBs+dcYhN6yXenGTTMRebZNhtwPwHyg@mail.gmail.com
We read blocks of data from files that we're backing up in chunks,
some multiple of BLCKSZ for each read. If checksum verification fails,
we then try rereading just the one block for which validation failed.
If that block happened to be the first block of the chunk, and if
the file was concurrently truncated to remove that block, then we'd
reach a call to bbsink_archive_contents() with a buffer length of 0.
That causes an assertion failure.
As far as I can see, there are no particularly bad consequences if
this happens in a non-assert build, and it's pretty unlikely to happen
in the first place because it requires a series of somewhat unlikely
things to happen in very quick succession. However, assertion failures
are bad, so rearrange the code to avoid that possibility.
Patch by me, reviewed by Michael Paquier.
Discussion: http://postgr.es/m/CA+TgmoZ_fFAoU6mrHt9QBs+dcYhN6yXenGTTMRebZNhtwPwHyg@mail.gmail.com
Because we added StaticAssertStmt() first before StaticAssertDecl(),
some uses as well as the instructions in c.h are now a bit backwards
from the "native" way static assertions are meant to be used in C.
This updates the guidance and moves some static assertions to better
places.
Specifically, since the addition of StaticAssertDecl(), we can put
static assertions at the file level. This moves a number of static
assertions out of function bodies, where they might have been stuck
out of necessity, to perhaps better places at the file level or in
header files.
Also, when the static assertion appears in a position where a
declaration is allowed, then using StaticAssertDecl() is more native
than StaticAssertStmt().
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/941a04e7-dd6f-c0e4-8cdf-a33b3338cbda%40enterprisedb.com
If sendFileWithContent were used to send a file larger than the
bbsink buffer size, this would result in corruption. The only
files that are sent via sendFileWithContent are the backup label
file, the tablespace map file, and .done files for WAL segments
included in the backup. Of these, it seems that only the
tablespace_map file can become large enough to cause a problem,
and then only if you have a lot of tablespaces. If you do have
that situation, you might end up with a corrupted
tablespace_map file, which would be bad.
My commit bef47ff85d introduced
this problem.
Report and patch by Antonin Houska.
Discussion: http://postgr.es/m/15764.1670528645@antos
In a similar effort to f01592f91, here we mostly rename shadowed local
variables to remove the warnings produced when compiling with
-Wshadow=compatible-local.
This fixes 63 warnings and leaves just 5.
Author: Justin Pryzby, David Rowley
Reviewed-by: Justin Pryzby
Discussion https://postgr.es/m/20220817145434.GC26426%40telsasoft.com
Commits cf112c12 and a0dc8271 were a little too hasty in getting rid of
the pg_ prefixes where we use pread(), pwrite() and vectored variants.
We dropped support for ancient Unixes where we needed to use lseek() to
implement replacements for those, but it turns out that Windows also
changes the current position even when you pass in an offset to
ReadFile() and WriteFile() if the file handle is synchronous, despite
its documentation saying otherwise.
Switching to asynchronous file handles would fix that, but have other
complications. For now let's just put back the pg_ prefix and add some
comments to highlight the non-standard side-effect, which we can now
describe as Windows-only.
Reported-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/20220923202439.GA1156054%40nathanxps13
There are still some alignment-related failures in the buildfarm,
which might or might not be able to be fixed quickly, but I've also
just realized that it increased the size of many WAL records by 4 bytes
because a block reference contains a RelFileLocator. The effect of that
hasn't been studied or discussed, so revert for now.
RelFileNumbers are now assigned using a separate counter, instead of
being assigned from the OID counter. This counter never wraps around:
if all 2^56 possible RelFileNumbers are used, an internal error
occurs. As the cluster is limited to 2^64 total bytes of WAL, this
limitation should not cause a problem in practice.
If the counter were 64 bits wide rather than 56 bits wide, we would
need to increase the width of the BufferTag, which might adversely
impact buffer lookup performance. Also, this lets us use bigint for
pg_class.relfilenode and other places where these values are exposed
at the SQL level without worrying about overflow.
This should remove the need to keep "tombstone" files around until
the next checkpoint when relations are removed. We do that to keep
RelFileNumbers from being recycled, but now that won't happen
anyway. However, this patch doesn't actually change anything in
this area; it just makes it possible for a future patch to do so.
Dilip Kumar, based on an idea from Andres Freund, who also reviewed
some earlier versions of the patch. Further review and some
wordsmithing by me. Also reviewed at various points by Ashutosh
Sharma, Vignesh C, Amul Sul, Álvaro Herrera, and Tom Lane.
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
This was used as the returned result type of the generated contents for
the backup_label and backup history files. This is replaced by a simple
string, reducing the cleanup burden of all the callers of
build_backup_content().
Reviewed-by: Bharath Rupireddy
Discussion: https://postgr.es/m/YzERvNPaZivHEKZJ@paquier.xyz
This change simplifies some of the logic related to the generation and
creation of the backup_label and backup history files, which has become
unnecessarily complicated since the removal of the exclusive backup mode
in commit 39969e2. The code was previously generating the contents of
these files as a string (start phase for the backup_label and stop phase
for the backup history file), one problem being that the contents of the
backup_label string were scanned to grab some of its internal contents
at the stop phase.
This commit changes the logic so as we store the data required to build
these files in an intermediate structure named BackupState. The
backup_label file and backup history file strings are generated when
they are ready to be sent back to the client. Both files are now
generated with the same code path. While on it, this commit renames
some variables for clarity.
Two new files named xlogbackup.{c,h} are introduced in this commit, to
remove from xlog.c some of the logic around base backups. Note that
more could be moved to this new set of files.
Author: Bharath Rupireddy, Michael Paquier
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CALj2ACXWwTDgJqCjdaPyfR7djwm6SrybGcrZyrvojzcsmt4FFw@mail.gmail.com
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in optimizer, parser,
utility, libpq, and "commands" code, as well as in remaining library
code. Do the same for all code related to frontend programs (with the
exception of pg_dump/pg_dumpall related code).
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy. Later commits will handle
ecpg and pg_dump/pg_dumpall.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
guc.c has grown to be one of our largest .c files, making it
a bottleneck for compilation. It's also acquired a bunch of
knowledge that'd be better kept elsewhere, because of our not
very good habit of putting variable-specific check hooks here.
Hence, split it up along these lines:
* guc.c itself retains just the core GUC housekeeping mechanisms.
* New file guc_funcs.c contains the SET/SHOW interfaces and some
SQL-accessible functions for GUC manipulation.
* New file guc_tables.c contains the data arrays that define the
built-in GUC variables, along with some already-exported constant
tables.
* GUC check/assign/show hook functions are moved to the variable's
home module, whenever that's clearly identifiable. A few hard-
to-classify hooks ended up in commands/variable.c, which was
already a home for miscellaneous GUC hook functions.
To avoid cluttering a lot more header files with #include "guc.h",
I also invented a new header file utils/guc_hooks.h and put all
the GUC hook functions' declarations there, regardless of their
originating module. That allowed removal of #include "guc.h"
from some existing headers. The fallout from that (hopefully
all caught here) demonstrates clearly why such inclusions are
best minimized: there are a lot of files that, for example,
were getting array.h at two or more levels of remove, despite
not having any connection at all to GUCs in themselves.
There is some very minor code beautification here, such as
renaming a couple of inconsistently-named hook functions
and improving some comments. But mostly this just moves
code from point A to point B and deals with the ensuing
needs for #include adjustments and exporting a few functions
that previously weren't exported.
Patch by me, per a suggestion from Andres Freund; thanks also
to Michael Paquier for the idea to invent guc_funcs.c.
Discussion: https://postgr.es/m/587607.1662836699@sss.pgh.pa.us
The comment in basebackup.c updated by 33bd4698c1 was actually
obsolete to begin with, since the symbols it was referring to haven't
existed in that header file for quite some time. The header file is
still needed for other reasons, though, so keep the #include, just
drop the comment.