from being accepted after the outer right brace. Per report from
Markus Bertheau.
Also add regression test cases for this change, and for previous
recent array literal parser changes.
PROCLOCK structs in shared memory now have only a bitmask for held
locks, rather than counts (making them 40 bytes smaller, which is a
good thing). Multiple locks within a transaction are counted in the
local hash table instead, and we have provision for tracking which
ResourceOwner each count belongs to. Solves recently reported problem
with memory leakage within long transactions.
> why does CVS tip still give me
>
> regression=# select extract(century from now());
> date_part
> -----------
> 20
> (1 row)
> [ ... looks in code ... ]
>
> Apparently it's because you fixed only timestamp_part, and not
> timestamptz_part. I'm not too sure about what timestamp_trunc or
> timestamptz_trunc should do, but they may be wrong as well.
Sigh... as usual, what is not tested does not work:-(
> Could we have a more complete patch?
Please find a submission attached. I hope it really fixes all decade,
century and millenium issues for extract and *_trunc functions on
interval
and other timestamp types. If someone could check that the results
are reasonnable, it would be great.
I indeed overlooked the fact that there were two functions. The patch
fixes the code so that both variants agree.
I added comments to interval extractions, because it relies on the C
division to have a negative remainder: -7/10 = 0 and remains -7.
As for *_trunc functions, I have chosen to put the first year of the
century or millennium: -100, 1, 101... 1001 2001 etc. Indeed, I don't
think it would make sense to put 2000 (last year of the 2nd millennium)
for rounding all years of the third millenium.
I also fixed the code so that all decades last 10 years and decade 199
means the 1990's.
I have added some tests that are relevant to deal with tricky cases. The
formula may be simplified, but all these cases must pass. Please keep
them.
Fabien Coelho
presence of dropped columns. Document the already-presumed fact that
eref aliases in relation RTEs are supposed to have entries for dropped
columns; cause the user alias structs to have such entries too, so that
there's always a one-to-one mapping to the underlying physical attnums.
Adjust expandRTE() and related code to handle the case where a column
that is part of a JOIN has been dropped. Generalize expandRTE()'s API
so that it can be used in a couple of places that formerly rolled their
own implementation of the same logic. Fix ruleutils.c to suppress
display of aliases for columns that were dropped since the rule was made.
to the physical layout of the rowtype, ie, there are dummy arguments
corresponding to any dropped columns in the rowtype. We formerly had a
couple of places that did it this way and several others that did not.
Fixes Gaetano Mendola's "cache lookup failed for type 0" bug of 5-Aug.
was previously allowed in odd places with odd results now causes an ERROR.
Also changed behavior with respect to whitespace -- trailing whitespace is
now ignored as well as leading whitespace (which has always been ignored).
Documentation updated to reflect change in whitespace handling. Also some
refactoring to what I believe is a more sensible order of several paragraphs.
This avoids changing the displayed appearance of ACL columns now that
array_out decorates its output with bounds information when the lower
bound isn't one. Per gripe from Gaetano Mendola. Note that I did not
force initdb for this, although any database initdb'd in the last
couple of days is going to have some problems.
subarrays of a given dimension have the same number of elements/subarrays.
Also repair a longstanding undocumented (as far as I can see) ability to
explicitly set array bounds in the array literal syntax. It now can
deal properly with negative array indicies. Modify array_out so that
arrays with non-standard lower bounds (i.e. not 1) are output with
the expicit dimension syntax. This fixes a longstanding issue whereby
arrays with non-default lower bounds had them changed to default
after a dump/reload cycle.
Modify regression tests and docs to suit, and add some minimal
documentation regarding the explicit dimension syntax.
and history files as per recent discussion. While at it, remove
pg_terminate_backend, since we have decided we do not have time during
this release cycle to address the reliability concerns it creates.
Split the 'Miscellaneous Functions' documentation section into
'System Information Functions' and 'System Administration Functions',
which hopefully will draw the eyes of those looking for such things.
error code for string-too-long errors. It should be STRING_DATA_RIGHT_TRUNCATION
not STRING_DATA_LENGTH_MISMATCH. The latter probably should only be
applied to cases where a string must be exactly so many bits --- there are
no cases at all where it applies to character strings, only bit strings.
to the old owner with the new owner. This is not necessarily right, but
it's sure a lot more likely to be what the user wants than doing nothing.
Christopher Kings-Lynne, some rework by Tom Lane.
than 'datetime BC zone', because the former is accepted by the timestamptz
input converter while the latter may not be depending on spacing. This
is not a loss of compatibility w.r.t. 7.4 and before, because until very
recently there was never a case where we'd output both zone and 'BC'.
better SQL compliance in this area, per recent discussion. Mark related
operators as commutators where possible. (The system doesn't actually care
about commutator marking for operators not returning boolean, at the moment,
but this seems forward-thinking and besides it made it easier to verify
that we hadn't missed any.)
Also, remove interval-minus-time and interval-minus-timetz operators.
I'm not sure how these got in, but they are nonstandard and had very
obviously broken behavior. (minus is not commutative in anyone's book.)
I doubt anyone had ever used 'em, because we'd surely have gotten a bug
report about it if so.
From an idea of Bruce, the attached patch implements the function
pg_tablespace_databases(oid) RETURNS SETOF oid
which delivers as set of database oids having objects in the selected
tablespace, enabling an admin to examine only the databases affecting
the tablespace for objects instead of scanning all of them.
initdb forced
This eliminates the assumption that a serial column's sequence will
have the same name on reload that it was given in the original database.
Christopher Kings-Lynne
There are various things left to do: contrib dbsize and oid2name modules
need work, and so does the documentation. Also someone should think about
COMMENT ON TABLESPACE and maybe RENAME TABLESPACE. Also initlocation is
dead, it just doesn't know it yet.
Gavin Sherry and Tom Lane.
eliminating the former hard-wired convention about their names. Allow
pg_cast entries to represent both type coercion and length coercion in
a single step --- this is represented by a function that takes an
extra typmod argument, just like a length coercion function. This
nicely merges the type and length coercion mechanisms into something
at least a little cleaner than we had before. Make use of the single-
coercion-step behavior to fix integer-to-bit coercion so that coercing
to bit(n) yields the rightmost n bits of the integer instead of the
leftmost n bits. This should fix recurrent complaints about the odd
behavior of this coercion. Clean up the documentation of the bit string
functions, and try to put it where people might actually find it.
Also, get rid of the unreliable heuristics in ruleutils.c about whether
to display nested coercion steps; instead require parse_coerce.c to
label them properly in the first place.
cidr type bit, the same as network_eq does. This is needed for hash joins
and hash aggregation to work correctly on these types. Per bug report
from Michael Fuhr, 2004-04-13.
Also, improve hash function for int8 as suggested by Greg Stark.
until Bind is received, so that actual parameter values are visible to the
planner. Make use of the parameter values for estimation purposes (but
don't fold them into the actual plan). This buys back most of the
potential loss of plan quality that ensues from using out-of-line
parameters instead of putting literal values right into the query text.
This patch creates a notion of constant-folding expressions 'for
estimation purposes only', in which case we can be more aggressive than
the normal eval_const_expressions() logic can be. Right now the only
difference in behavior is inserting bound values for Params, but it will
be interesting to look at other possibilities. One that we've seen
come up repeatedly is reducing now() and related functions to current
values, so that queries like ... WHERE timestampcol > now() - '1 day'
have some chance of being planned effectively.
Oliver Jowett, with some kibitzing from Tom Lane.
As a side effect, cause subscripts in INSERT targetlists to do something
more or less sensible; previously we evaluated such subscripts and then
effectively ignored them. Another side effect is that UPDATE-ing an
element or slice of an array value that is NULL now produces a non-null
result, namely an array containing just the assigned-to positions.
of a composite type to get that type's OID as their second parameter,
in place of typelem which is useless. The actual changes are mostly
centralized in getTypeInputInfo and siblings, but I had to fix a few
places that were fetching pg_type.typelem for themselves instead of
using the lsyscache.c routines. Also, I renamed all the related variables
from 'typelem' to 'typioparam' to discourage people from assuming that
they necessarily contain array element types.
place of time_t, as per prior discussion. The behavior does not change
on machines without a 64-bit-int type, but on machines with one, which
is most, we are rid of the bizarre boundary behavior at the edges of
the 32-bit-time_t range (1901 and 2038). The system will now treat
times over the full supported timestamp range as being in your local
time zone. It may seem a little bizarre to consider that times in
4000 BC are PST or EST, but this is surely at least as reasonable as
propagating Gregorian calendar rules back that far.
I did not modify the format of the zic timezone database files, which
means that for the moment the system will not know about daylight-savings
periods outside the range 1901-2038. Given the way the files are set up,
it's not a simple decision like 'widen to 64 bits'; we have to actually
think about the range of years that need to be supported. We should
probably inquire what the plans of the upstream zic people are before
making any decisions of our own.
of bug report #1150. Also, arrange that the object owner's irrevocable
grant-option permissions are handled implicitly by the system rather than
being listed in the ACL as self-granted rights (which was wrong anyway).
I did not take the further step of showing these permissions in an
explicit 'granted by _SYSTEM' ACL entry, as that seemed more likely to
bollix up existing clients than to do anything really useful. It's still
a possible future direction, though.
issue in timestamp conversion that we hacked around for so long by
ignoring the seconds field from localtime(). It's simple: you have
to watch out for platform-specific roundoff error when reducing a
possibly-fractional timestamp to integral time_t form. In particular
we should subtract off the already-determined fractional fsec field.
This should be enough to get an exact answer with int64 timestamps;
with float timestamps, throw in a rint() call just to be sure.
the four functions.
> Also, please justify the temp-related changes. I was not aware that we
> had any breakage there.
patch-tmp-schema.txt contains the following bits:
*) Changes pg_namespace_aclmask() so that the superuser is always able
to create objects in the temp namespace.
*) Changes pg_namespace_aclmask() so that if this is a temp namespace,
objects are only allowed to be created in the temp namespace if the
user has TEMP privs on the database. This encompasses all object
creation, not just TEMP tables.
*) InitTempTableNamespace() checks to see if the current user, not the
session user, has access to create a temp namespace.
The first two changes are necessary to support the third change. Now
it's possible to revoke all temp table privs from non-super users and
limiting all creation of temp tables/schemas via a function that's
executed with elevated privs (security definer). Before this change,
it was not possible to have a setuid function to create a temp
table/schema if the session user had no TEMP privs.
patch-area-path.txt contains:
*) Can now determine the area of a closed path.
patch-dfmgr.txt contains:
*) Small tweak to add the library path that's being expanded.
I was using $lib/foo.so and couldn't easily figure out what the error
message, "invalid macro name in dynamic library path" meant without
looking through the source code. With the path in there, at least I
know where to start looking in my config file.
Sean Chittenden
(1) boolean-and and boolean-or aggregates named bool_and and bool_or.
they (SHOULD;-) correspond to standard sql every and some/any aggregates.
they do not have the right name as there is a problem with
the standard and the parser for some/any. Tom also think that
the standard name is misleading because NULL are ignored.
Also add 'every' aggregate.
(2) bitwise integer aggregates named bit_and and bit_or for
int2, int4, int8 and bit types. They are not standard, but I find
them useful. I needed them once.
The patches adds:
- 2 new very short strict functions for boolean aggregates in
src/backed/utils/adt/bool.c,
src/include/utils/builtins.h and src/include/catalog/pg_proc.h
- the new aggregates declared in src/include/catalog/pg_proc.h and
src/include/catalog/pg_aggregate.h
- some documentation and validation about these new aggregates.
Fabien COELHO
In the past, we used a 'Lispy' linked list implementation: a "list" was
merely a pointer to the head node of the list. The problem with that
design is that it makes lappend() and length() linear time. This patch
fixes that problem (and others) by maintaining a count of the list
length and a pointer to the tail node along with each head node pointer.
A "list" is now a pointer to a structure containing some meta-data
about the list; the head and tail pointers in that structure refer
to ListCell structures that maintain the actual linked list of nodes.
The function names of the list API have also been changed to, I hope,
be more logically consistent. By default, the old function names are
still available; they will be disabled-by-default once the rest of
the tree has been updated to use the new API names.
functions. This allows these functions to work correctly with Unicode and
other multibyte encodings. Per prior discussion.
Also, revert my earlier change to move installation path mashing from
Makefile.global to configure. Turns out not to work well because configure
script is working with unexpanded variables, and so fails to match in
cases where it should match.
and should do now that we control our own destiny for timezone handling,
but this commit gets the bulk of the picayune diffs in place.
Magnus Hagander and Tom Lane.
a variant of the function for the 'numeric' datatype; it would be possible
to add additional variants for other datatypes, but I haven't done so yet.
This commit includes regression tests and minimal documentation; if we
want developers to actually use this function in applications, we'll
probably need to document what it does more fully.
by Ken Ashcraft's report. I think there is no actual bug here since if
the int32 value does wrap a little bit, palloc will still reject it.
Still it's better that the code be obviously correct.
rather than allowing them only in a few special cases as before. In
particular you can now pass a ROW() construct to a function that accepts
a rowtype parameter. Internal generation of RowExprs fixes a number of
corner cases that used to not work very well, such as referencing the
whole-row result of a JOIN or subquery. This represents a further step in
the work I started a month or so back to make rowtype values into
first-class citizens.
conversion of basic ASCII letters. Remove all uses of strcasecmp and
strncasecmp in favor of new functions pg_strcasecmp and pg_strncasecmp;
remove most but not all direct uses of toupper and tolower in favor of
pg_toupper and pg_tolower. These functions use the same notions of
case folding already developed for identifier case conversion. I left
the straight locale-based folding in place for situations where we are
just manipulating user data and not trying to match it to built-in
strings --- for example, the SQL upper() function is still locale
dependent. Perhaps this will prove not to be what's wanted, but at
the moment we can initdb and pass regression tests in Turkish locale.
* ALTER ... ADD COLUMN with defaults and NOT NULL constraints works per SQL
spec. A default is implemented by rewriting the table with the new value
stored in each row.
* ALTER COLUMN TYPE. You can change a column's datatype to anything you
want, so long as you can specify how to convert the old value. Rewrites
the table. (Possible future improvement: optimize no-op conversions such
as varchar(N) to varchar(N+1).)
* Multiple ALTER actions in a single ALTER TABLE command. You can perform
any number of column additions, type changes, and constraint additions with
only one pass over the table contents.
Basic documentation provided in ALTER TABLE ref page, but some more docs
work is needed.
Original patch from Rod Taylor, additional work from Tom Lane.
> Please find a attached a small patch that adds accessor functions
> for "aclitem" so that it is not an opaque datatype.
>
> I needed these functions to browse aclitems from user land. I can load
> them when necessary, but it seems to me that these accessors for a
> backend type belong to the backend, so I submit them.
>
> Fabien Coelho
for "aclitem" so that it is not an opaque datatype.
I needed these functions to browse aclitems from user land. I can load
them when necessary, but it seems to me that these accessors for a
backend type belong to the backend, so I submit them.
Fabien Coelho
"millennium" date part implementation in postgresql, both in the code
and the documentation, so that it conforms to the official definition.
If you do not agree with the official definition, please send your
complaint to "pope@vatican.org". I'm not responsible for them;-)
With the previous version, the centuries and millenniums had a wrong
number and started the wrong year. Moreover century number 0, which does
not exist in reality, lasted 200 years. Also, millennium number 0 lasted
2000 years.
If you want postgresql to have it's own definition of "century" and
"millennium" that does not conform to the one of the society, just give
them another name. I would suggest "pgCENTURY" and "pgMILLENNIUM";-)
IMO, if someone may use the options, it means that postgresql is used for
historical data, so it make sense to have an historical definition. Also,
I just want to divide the year by 100 or 1000, I can do that quite easily.
BACKWARD INCOMPATIBLE CHANGE
Fabien Coelho - coelho@cri.ensmp.fr
results with tuples as ordinary varlena Datums. This commit does not
in itself do much for us, except eliminate the horrid memory leak
associated with evaluation of whole-row variables. However, it lays the
groundwork for allowing composite types as table columns, and perhaps
some other useful features as well. Per my proposal of a few days ago.
so that the 'val' is computed only once, per recent discussion. The
speedup is not much when 'val' is just a simple variable, but could be
significant for larger expressions. More importantly this avoids issues
with multiple evaluations of a volatile 'val', and it allows the CASE
expression to be reverse-listed in its original form by ruleutils.c.
In particular, don't depend on strtod() to accept 'NaN' and 'Infinity'
inputs (while this is required by C99, not all platforms are compliant
with that yet). Also, don't require glibc's behavior from isinf():
it seems that on a lot of platforms isinf() does not itself distinguish
between negative and positive infinity.
types. Update the regression tests and the documentation to reflect
this. Remove the UNSAFE_FLOATS #ifdef.
This is only half the story: we still unconditionally reject
floating point operations that result in +/- infinity. See
recent thread on -hackers for more information.
any amount of leading or trailing whitespace (where "whitespace"
is defined by isspace()). This is for SQL conformance, as well
as consistency with other numeric types (e.g. oid, numeric).
Also refactor pg_atoi() to avoid looking at errno where not
necessary, and add a bunch of regression tests for the input
to these types.
support for 'week' within the date_trunc function.
Within the patch I added a couple of test cases and associated target
output, and changed the documentation to add 'week' appropriately.
Robert Creager
float8 types. This begins the deprecation of this feature: in 7.6,
this input will be rejected.
Also added a new error code for warnings about deprecated features,
and updated the regression tests.
comments, make some unrelated improvements to the functions
documentation, and perform some minor consistency cleanup
elsewhere. Original initcap() change from Dennis B., additional
changes by Neil C.
* Changes incorrect CYGWIN defines to __CYGWIN__
* Some localtime returns NULL checks (when unchecked cause SEGVs under
Win32
regression tests)
* Rationalized CreateSharedMemoryAndSemaphores and
AttachSharedMemoryAndSemaphores (Bruce, I finally remembered to do it);
requires attention.
Claudio Natoli
problem, per previous discussion. Make some additional changes to
centralize the knowledge of just how identifier downcasing is done,
in hopes of simplifying any future tweaking in this area.
corner cases that could stand improvement, but it does all the basic
stuff. A byproduct is that the selectivity routines are no longer
constrained to working on simple Vars; we might in future be able to
improve the behavior for subexpressions that don't match indexes.
vs. timestamptz. This allows use of indexes for expressions like
datecol >= date 'today' - interval '1 month'
which were formerly not indexable without casting the righthand side
down from timestamp to date.
is asked to assign a variable to itself, it will result in doing a
memcpy() on an entirely-overlapping memory range, which results in
undefined behavior according to ANSI C. That said, it is unlikely to
actually do anything bad on any sane libc, but this keeps valgrind quiet.
Make btree index creation and initial validation of foreign-key constraints
use maintenance_work_mem rather than work_mem as their memory limit.
Add some code to guc.c to allow these variables to be referenced by their
old names in SHOW and SET commands, for backwards compatibility.
a series of numbers, optionally using an explicit step size other
than the default value (one). Use function in the information_schema
to replace hard-wired knowledge of INDEX_MAX_KEYS. initdb forced due
to pg_proc change. Documentation update still needed -- will be
committed separately.
should not be too eager to reject paths involving unknown schemas, since
it can't really tell whether the schemas exist in the target database.
(Also, when reading pg_dumpall output, it could be that the schemas
don't exist yet, but eventually will.) ALTER USER SET has a similar issue.
So, reduce the normal ERROR to a NOTICE when checking search_path values
for these commands. Supporting this requires changing the API for GUC
assign_hook functions, which causes the patch to touch a lot of places,
but the changes are conceptually trivial.
a run-time key (that is, a nonconstant expression compared to the index
variable), the key is evaluated just once per scan, but we were charging
costs as though it were evaluated once per visited index entry.
pointer type when it is not necessary to do so.
For future reference, casting NULL to a pointer type is only necessary
when (a) invoking a function AND either (b) the function has no prototype
OR (c) the function is a varargs function.
parameters to be declared with names. pg_proc has a column to store
names, and CREATE FUNCTION can insert data into it, but that's all as
yet. I need to do more work on the pg_dump and plpgsql portions of the
patch before committing those, but I thought I'd get the bulky changes
in before the tree drifts under me.
initdb forced due to pg_proc change.
with index qual clauses in the Path representation. This saves a little
work during createplan and (probably more importantly) allows reuse of
cached selectivity estimates during indexscan planning. Also fix latent
bug: wrong plan would have been generated for a 'special operator' used
in a nestloop-inner-indexscan join qual, because the special operator
would not have gotten into the list of quals to recheck. This bug is
only latent because at present the special-operator code could never
trigger on a join qual, but sooner or later someone will want to do it.
conditions is overkill; set_union() does the job about as well, and
much more efficiently. Furthermore this avoids assuming that
canonicalize_qual() will check for duplicate clauses at all, which
it may not always do.
about whether it is applied before or after eval_const_expressions().
I believe there were some corner cases where the system would fail to
recognize that a partial index is applicable because of the previous
inconsistency. Store normal rather than 'implicit AND' representations
of constraints and index predicates in the catalogs.
initdb forced due to representation change of constraints/predicates.
> > needed, and other people in the past asked about it too.
>
> It is in Oracle, but you aren't exactly on the spot. It should be
>
> IYYY - 4 digits ('2003')
> IYY - 3 digits ('003')
> IY - 2 digits ('03')
> I - 1 digit ('3')
Here is an updated patch that does that.
Kurt Roeckx
> Attached is a patch that addressed all the discussed issues
> that did not break backward compatability, including the
> ability to output ISO-8601 compliant intervals by setting
> datestyle to iso8601basic.
a) ones that are 100% backward (such as the comment about
outputting this format)
and
b) ones that aren't (such as deprecating the current
postgresql shorthand of
'1Y1M'::interval = 1 year 1 minute
in favor of the ISO-8601
'P1Y1M'::interval = 1 year 1 month.
Attached is a patch that addressed all the discussed issues that
did not break backward compatability, including the ability to
output ISO-8601 compliant intervals by setting datestyle to
iso8601basic.
Interval values can now be written as ISO 8601 time intervals, using
the "Format with time-unit designators". This format always starts with
the character 'P', followed by a string of values followed
by single character time-unit designators. A 'T' separates the date and
time parts of the interval.
Ron Mayer
to note:
1) arttype is numeric. I thought this was the best way of allowing
arbitarily large factorials, even though factorial(2^63) is a large
number. Happy to change to integers if this is overkill.
2) since we're accepting numeric arguments, the patch tests for floats.
If a numeric is passed with non-zero decimal portion, an error is raised
since (from memory) they are undefined.
Gavin Sherry
which had been unintentionally broken by recent changes to tighten up the
DateStyle rules for all-numeric date input. Add documentation and
regression tests for this, too.
pghackers proposal of 8-Nov. All the existing cross-type comparison
operators (int2/int4/int8 and float4/float8) have appropriate support.
The original proposal of storing the right-hand-side datatype as part of
the primary key for pg_amop and pg_amproc got modified a bit in the event;
it is easier to store zero as the 'default' case and only store a nonzero
when the operator is actually cross-type. Along the way, remove the
long-since-defunct bigbox_ops operator class.
Remove the 'strategy map' code, which was a large amount of mechanism
that no longer had any use except reverse-mapping from procedure OID to
strategy number. Passing the strategy number to the index AM in the
first place is simpler and faster.
This is a preliminary step in planned support for cross-datatype index
operations. I'm committing it now since the ScanKeyEntryInitialize()
API change touches quite a lot of files, and I want to commit those
changes before the tree drifts under me.
rule split the query into one INSERT and one UPDATE where the UPDATE
then hit's the just created row without modifying the key fields again.
In this special case, the new key slipped in totally unchecked.
Jan
ACL array, and force languages to be treated as owned by the bootstrap
user ID. (pg_language should have a lanowner column, but until it does
this will have to do as a workaround.)
a single LEFT JOIN query instead of firing the check trigger for each
row individually. Stephan Szabo, with some kibitzing from Tom Lane and
Jan Wieck.
with required outer parentheses. Breakage seems to be leftover from
domain-constraint patches. This could be smarter about suppressing
extra parens, but at this stage of the release cycle I want certainty
not cuteness.
in the schema search path. Otherwise pg_dump doesn't correctly dump
scenarios where a custom opclass is created in 'public' and then used
by indexes in other schemas.
discussion on pgsql-hackers: in READ COMMITTED mode we just have to force
a QuerySnapshot update in the trigger, but in SERIALIZABLE mode we have
to run the scan under a current snapshot and then complain if any rows
would be updated/deleted that are not visible in the transaction snapshot.
Before patch:
test=# select pg_get_constraintdef(oid) from pg_constraint;
pg_get_constraintdef
-------------------------------------------------------------------------------------------------
CHECK (VALUE >= 0)
CHECK ((((a)::text = 'asdf'::text) OR ((a)::text = 'fdsa'::text)) OR
((a)::text = 'dfd'::text))
PRIMARY KEY (b)
FOREIGN KEY (a) REFERENCES test2(b)
UNIQUE (b)
(5 rows)
test=# select pg_get_constraintdef(oid, true) from pg_constraint;
pg_get_constraintdef
-----------------------------------------------------------------------------------
CHECK VALUE >= 0
CHECK a::text = 'asdf'::text OR a::text = 'fdsa'::text OR a::text =
'dfd'::text
PRIMARY KEY (b)
FOREIGN KEY (a) REFERENCES test2(b)
UNIQUE (b)
(5 rows)
After patch:
test=# select pg_get_constraintdef(oid) from pg_constraint;
pg_get_constraintdef
-------------------------------------------------------------------------------------------------
CHECK (VALUE >= 0)
CHECK ((((a)::text = 'asdf'::text) OR ((a)::text = 'fdsa'::text)) OR
((a)::text = 'dfd'::text))
PRIMARY KEY (b)
FOREIGN KEY (a) REFERENCES test2(b)
UNIQUE (b)
(5 rows)
test=# select pg_get_constraintdef(oid, true) from pg_constraint;
pg_get_constraintdef
-----------------------------------------------------------------------------------
CHECK (VALUE >= 0)
` CHECK (a::text = 'asdf'::text OR a::text = 'fdsa'::text OR a::text =
'dfd'::text)
PRIMARY KEY (b)
FOREIGN KEY (a) REFERENCES test2(b)
UNIQUE (b)
(5 rows)
It's important that those brackets are there to (a) match all other
constraints and (b) so that people can just copy and paste them and it
will work as SQL.
Christopher Kings-Lynne
in the RI triggers for ON DELETE/UPDATE SET DEFAULT. The code depended
way too much on knowledge of plan structure, and yet still would fail
if the generated query got rewritten by rules.
to allow es_snapshot to be set to SnapshotNow rather than a query snapshot.
This solves a bug reported by Wade Klaver, wherein triggers fired as a
result of RI cascade updates could misbehave.
recent gripe, I discovered not one but two undocumented, undesirable
behaviors of glibc's mktime. So, stop using it entirely, and always
rely on inversion of localtime() to determine the local time zone.
It's not even very much slower, as it turns out that mktime (at least
in the glibc implementation) also does repeated reverse-conversions.
SQLSTATE error codes required by SQL99 (invalid format, datetime field
overflow, interval field overflow, invalid time zone displacement value).
Also emit a HINT about DateStyle in cases where it seems appropriate.
Per recent gripes.
perform a timestamp-to-date coercion. Instead both routines share a
subroutine that delivers the parsing result as a struct tm. This avoids
problems with timezone dependency of to_date's result, and should be
at least marginally faster too.
be anything yielding an array of the proper kind, not only sub-ARRAY[]
constructs; do subscript checking at runtime not parse time. Also,
adjust array_cat to make array || array comply with the SQL99 spec.
Joe Conway
datatype by array_eq and array_cmp; use this to solve problems with memory
leaks in array indexing support. The parser's equality_oper and ordering_oper
routines also use the cache. Change the operator search algorithms to look
for appropriate btree or hash index opclasses, instead of assuming operators
named '<' or '=' have the right semantics. (ORDER BY ASC/DESC now also look
at opclasses, instead of assuming '<' and '>' are the right things.) Add
several more index opclasses so that there is no regression in functionality
for base datatypes. initdb forced due to catalog additions.
target columns in INSERT and UPDATE targetlists. Don't rely on resname
to be accurate in ruleutils, either. This fixes bug reported by
Donald Fraser, in which renaming a column referenced in a rule did not
work very well.
yet, though). Avoid using nth() to fetch tlist entries; provide a
common routine get_tle_by_resno() to search a tlist for a particular
resno. This replaces a couple uses of nth() and a dozen hand-coded
search loops. Also, replace a few uses of nth(length-1, list) with
llast().
encountered; per bug report from Christian van der Leeden 8/7/03.
Also, adjust larger/smaller routines (MAX/MIN) to share code with
comparisons for timestamp, interval, timetz.
writing one more value into return arrays than will fit. This is
potentially a stack smash, though I do not think it is a problem in
current uses of the routine, since a failure return causes elog anyway.
in HAVE_INT64_TIMESTAMP cases, including two potential stack smashes
when more than six fractional digits were supplied. Per bug report
from Philipp Reisner.