status, including a status where the server is running but refuses a
postgres connection.
Have pg_ctl use this new function. This fixes the case where pg_ctl
reports that the server is not running (cannot connect) but in fact it
is running.
supplied, also print the IP address. This allows IPv4 and IPv6 failures
to be distinguished. Also useful when a hostname resolves to multiple
IP addresses.
Also, remove use of inet_ntoa() and use our own inet_net_ntop() in all
places, including in libpq, because it is thread-safe.
Block elements with verbatim formatting (literallayout, programlisting,
screen, synopsis) should be aligned at column 0 independent of the surrounding
SGML, because whitespace is significant, and indenting them creates erratic
whitespace in the output. The CSS stylesheets already take care of indenting
the output.
Assorted markup improvements to go along with it.
This adds a libpq connection parameter requirepeer that specifies the user
name that the server process is expected to run under.
reviewed by KaiGai Kohei
parameter against server cert's CN field) to succeed in the case where
both host and hostaddr are specified. As with the existing precedents
for Kerberos, GSSAPI, SSPI, it is the calling application's responsibility
that host and hostaddr match up --- we just use the host name as given.
Per bug #5559 from Christopher Head.
In passing, make the error handling and messages for the no-host-name-given
failure more consistent among these four cases, and correct a lie in the
documentation: we don't attempt to reverse-lookup host from hostaddr
if host is missing.
Back-patch to 8.4 where SSL cert verification was introduced.
The revised documentation makes it more clear that these are client-side
parameters, rather than server side parameters. It also puts the main
point of each parameter first, and consolidates the conditions under which
it might be ignored in a single list at the end.
This adds four additional connection parameters to libpq: keepalives,
keepalives_idle, keepalives_count, and keepalives_interval.
keepalives default to on, per discussion, but can be turned off by
specifying keepalives=0. The remaining parameters, where supported,
can be used to adjust how often keepalives are sent and how many
can be lost before the connection is broken.
The immediate motivation for this patch is to make sure that
walreceiver will eventually notice if the master reboots without
closing the connection cleanly, but it should be helpful in other
cases as well.
Tollef Fog Heen, Fujii Masao, and me.
string for a streaming replication connection. It's ignored by the
server, but allows libpq to pick up the password from .pgpass where
"replication" is specified as the database name.
Patch by Fujii Masao per Tom's suggestion, with some wording changes by me.
The endterm attribute is mainly useful when the toolchain does not support
automatic link target text generation for a particular situation. In the
past, this was required by the man page tools for all reference page links,
but that is no longer the case, and it now actually gets in the way of
proper automatic link text generation. The only remaining use cases are
currently xrefs to refsects.
In addition, add support for a "payload" string to be passed along with
each notify event.
This implementation should be significantly more efficient than the old one,
and is also more compatible with Hot Standby usage. There is not yet any
facility for HS slaves to receive notifications generated on the master,
although such a thing is possible in future.
Joachim Wieland, reviewed by Jeff Davis; also hacked on by me.
If expand_dbname is non-zero and dbname contains an = sign, it is taken as
a conninfo string in exactly the same way as if it had been passed to
PQconnectdb. This is equivalent to the way PQsetdbLogin() works, allowing
PQconnectdbParams() to be a complete alternative.
Also improve the way the new function is called from psql and replace a
previously missed call to PQsetdbLogin() in psql. Additionally use
PQconnectdbParams() for pg_dump and friends, and the bin/scripts
command line utilities such as vacuumdb, createdb, etc.
Finally, update the documentation for the new parameter, as well as the
nuances of precedence in cases where key words are repeated or duplicated
in the conninfo string.
PQconnectStartParams. These are analogous to PQconnectdb and PQconnectStart
respectively. They differ from the legacy functions in that they accept
two NULL-terminated arrays, keywords and values, rather than conninfo
strings. This avoids the need to build the conninfo string in cases
where it might be inconvenient to do so. Includes documentation.
Also modify psql to utilize PQconnectdbParams rather than PQsetdbLogin.
This allows the new config parameter application_name to be set, which
in turn is displayed in the pg_stat_activity view and included in CSV
log entries. This will also ensure both new functions get regularly
exercised.
Patch by Guillaume Lelarge with review and minor adjustments by
Joe Conway.
PQescapeLiteral is similar to PQescapeStringConn, but it relieves the
caller of the need to know how large the output buffer should be, and
it provides the appropriate quoting (in addition to escaping special
characers within the string). PQescapeIdentifier provides similar
functionality for escaping identifiers.
Per recent discussion with Tom Lane.
Modify the "Escaping Strings for Inclusion in SQL Commands" section
to use a <variablelist> as the preceding and following sections do,
and merge the "Escaping Binary Strings for Inclusion in SQL Commands"
section into it.
This changes only the formatting of these sections, not the content.
It is intended to lay the groundwork for a follow-on patch to add
some new escaping functions, but it makes sense to commit this first,
for clarity.
to the client by the server. This might seem pretty pointless but apparently
it will help pgbouncer, and perhaps other connection poolers. Anyway it's
practically free to do so for the normal use-case where appname is only set
in the startup packet --- we're just adding a few more bytes to the initial
ParameterStatus response packet. Per comments from Marko Kreen.
"verify-ca" and "verify-full".
Since "prefer" remains the default, this will make certificate validation
off by default, which should lead to less upgrade issues.
and certificate revokation list by using connection parameters or environment
variables.
Original patch by Mark Woodward, heavily reworked by Alvaro Herrera and
Magnus Hagander.
libpq. As noted by Peter, adding this variable created a risk of unexpected
connection failures when talking to older server versions, and since it
doesn't do anything you can't do with PGOPTIONS, it doesn't seem really
necessary. Removing it does occasion a few extra lines in pg_regress.c,
but saving a getenv() call per libpq connection attempt is perhaps worth
that anyway.
from DateStyle, and create a new interval style that produces output matching
the SQL standard (at least for interval values that fall within the standard's
restrictions). IntervalStyle is also used to resolve the conflict between the
standard and traditional Postgres rules for interpreting negative interval
input.
Ron Mayer
after each other (since we already add a newline on each, this makes them
multiline).
Previously a new error would just overwrite the old one, so for example any
error caused when trying to connect with SSL enabled would be overwritten
by the error message form the non-SSL connection when using sslmode=prefer.
that presence of the password in the conninfo string must be checked *before*
risking a connection attempt, there is no point in checking it afterwards.
This makes the specification of PQconnectionUsedPassword() a bit simpler
and perhaps more generally useful, too.
conninfo string *before* trying to connect to the remote server, not after.
As pointed out by Marko Kreen, in certain not-very-plausible situations
this could result in sending a password from the postgres user's .pgpass file,
or other places that non-superusers shouldn't have access to, to an
untrustworthy remote server. The cleanest fix seems to be to expose libpq's
conninfo-string-parsing code so that dblink can check for a password option
without duplicating the parsing logic.
Joe Conway, with a little cleanup by Tom Lane
sequence of operations that libpq goes through while creating a PGresult.
Also, remove ill-considered "const" decoration on parameters passed to
event procedures.
guarantees about whether event procedures will receive DESTROY events.
They no longer need to defend themselves against getting a DESTROY
without a successful prior CREATE.
Andrew Chernow
key files that are similar to the one for the postmaster's data directory
permissions check. (I chose to standardize on that one since it's the most
heavily used and presumably best-wordsmithed by now.) Also eliminate explicit
tests on file ownership in these places, since the ensuing read attempt must
fail anyway if it's wrong, and there seems no value in issuing the same error
message for distinct problems. (But I left in the explicit ownership test in
postmaster.c, since it had its own error message anyway.) Also be more
specific in the documentation's descriptions of these checks. Per a gripe
from Kevin Hunter.
PQconnectionNeedsPassword function that tells the right thing for whether to
prompt for a password, and improve PQconnectionUsedPassword so that it checks
whether the password used by the connection was actually supplied as a
connection argument, instead of coming from environment or a password file.
Per bug report from Mark Cave-Ayland and subsequent discussion.
against a Unix server, and Windows-specific server-side authentication
using SSPI "negotiate" method (Kerberos or NTLM).
Only builds properly with MSVC for now.
PGconn. Invent a new libpq connection-status function,
PQconnectionUsedPassword() that returns true if the server
demanded a password during authentication, false otherwise.
This may be useful to clients in general, but is immediately
useful to help plug a privilege escalation path in dblink.
Per list discussion and design proposed by Tom Lane.
o read global SSL configuration file
o add GUC "ssl_ciphers" to control allowed ciphers
o add libpq environment variable PGSSLKEY to control SSL hardware keys
Victor B. Wagner
Standard English uses "may", "can", and "might" in different ways:
may - permission, "You may borrow my rake."
can - ability, "I can lift that log."
might - possibility, "It might rain today."
Unfortunately, in conversational English, their use is often mixed, as
in, "You may use this variable to do X", when in fact, "can" is a better
choice. Similarly, "It may crash" is better stated, "It might crash".
Also update two error messages mentioned in the documenation to match.
more, and standard_conforming_strings less, because in the future non-E
strings will not treat backslashes specially.
Also use E'' strings where backslashes are used in examples. (The
existing examples would have drawn warnings.)
Backpatch to 8.2.X.
and standard_conforming_strings. The encoding changes are needed for proper
escaping in multibyte encodings, as per the SQL-injection vulnerabilities
noted in CVE-2006-2313 and CVE-2006-2314. Concurrent fixes are being applied
to the server to ensure that it rejects queries that may have been corrupted
by attempted SQL injection, but this merely guarantees that unpatched clients
will fail rather than allow injection. An actual fix requires changing the
client-side code. While at it we have also fixed these routines to understand
about standard_conforming_strings, so that the upcoming changeover to SQL-spec
string syntax can be somewhat transparent to client code.
Since the existing API of PQescapeString and PQescapeBytea provides no way to
inform them which settings are in use, these functions are now deprecated in
favor of new functions PQescapeStringConn and PQescapeByteaConn. The new
functions take the PGconn to which the string will be sent as an additional
parameter, and look inside the connection structure to determine what to do.
So as to provide some functionality for clients using the old functions,
libpq stores the latest encoding and standard_conforming_strings values
received from the backend in static variables, and the old functions consult
these variables. This will work reliably in clients using only one Postgres
connection at a time, or even multiple connections if they all use the same
encoding and string syntax settings; which should cover many practical
scenarios.
Clients that use homebrew escaping methods, such as PHP's addslashes()
function or even hardwired regexp substitution, will require extra effort
to fix :-(. It is strongly recommended that such code be replaced by use of
PQescapeStringConn/PQescapeByteaConn if at all feasible.
compatibility for release 7.2 and earlier. I have not altered any
mentions of release 7.3 or later. The release notes were not modified,
so the changes are still documented, just not in the main docs.
PQregisterThreadLock().
I also remove the crypt() mention in the libpq threading section and
added a single sentence in the client-auth manual page under crypt().
Crypt authentication is so old now that a separate paragraph about it
seemed unwise.
I also added a comment about our use of locking around pqGetpwuid().
a parameter in binary format. Also, add a TIP explaining how to use casts
in the query text to avoid needing to specify parameter types by OID.
Also fix bogus spacing --- apparently somebody expanded the tabs in the
example programs to 8 spaces instead of 4 when transposing them into SGML.
with main, avoid using a SQL-defined SQLSTATE for what is most definitely
not a SQL-compatible error condition, fix documentation omissions,
adhere to message style guidelines, don't use two GUC_REPORT variables
when one is sufficient. Nothing done about pg_dump issues.
unlike template0 and template1 does not have any special status in
terms of backend functionality. However, all external utilities such
as createuser and createdb now connect to "postgres" instead of
template1, and the documentation is changed to encourage people to use
"postgres" instead of template1 as a play area. This should fix some
longstanding gotchas involving unexpected propagation of database
objects by createdb (when you used template1 without understanding
the implications), as well as ameliorating the problem that CREATE
DATABASE is unhappy if anyone else is connected to template1.
Patch by Dave Page, minor editing by Tom Lane. All per recent
pghackers discussions.
patch adds missing checks to the call sites of malloc(), strdup(),
PQmakeEmptyPGresult(), pqResultAlloc(), and pqResultStrdup(), and updates
the documentation. Per original report from Volkan Yazici about
PQmakeEmptyPGresult() not checking for malloc() failure.
postgresql.conf.
---------------------------------------------------------------------------
Here's an updated version of the patch, with the following changes:
1) No longer uses "service name" as "application version". It's instead
hardcoded as "postgres". It could be argued that this part should be
backpatched to 8.0, but it doesn't make a big difference until you can
start changing it with GUC / connection parameters. This change only
affects kerberos 5, not 4.
2) Now downcases kerberos usernames when the client is running on win32.
3) Adds guc option for "krb_caseins_users" to make the server ignore
case mismatch which is required by some KDCs such as Active Directory.
Off by default, per discussion with Tom. This change only affects
kerberos 5, not 4.
4) Updated so it doesn't conflict with the rendevouz/bonjour patch
already in ;-)
Magnus Hagander
! authentication. Use of this environment variable is not
! recommended for security reasons (some operating systems
! allow non-root users to see process environment variables via
! <application>ps</>); instead consider using the
! <filename>~/.pgpass</> file (see <xref linkend="libpq-pgpass">).