GetNamedDSMSegment() doesn't check whether dsm_attach() returns
NULL, which creates the possibility of a NULL pointer dereference
soon after. To fix, emit an ERROR if dsm_attach() returns NULL.
This shouldn't happen, but it would be nice to avoid a segfault if
it does. In passing, tidy up the surrounding code.
Reported-by: Tom Lane
Reviewed-by: Michael Paquier, Bharath Rupireddy
Discussion: https://postgr.es/m/3348869.1705854106%40sss.pgh.pa.us
This commit fixes an error message that failed to show the correct
function and library names when a function cannot be loaded.
While on it, adjust the call to load_external_function() so as this
ERROR can be reached, by making load_external_function() return NULL
rather than fail if a function cannot be found for a given injection
point.
Thinkos in d86d20f0ba.
1. The memcpy()s in InjectionPointAttach() would copy garbage from
beyond the end of input string to the buffer in shared memory. You
won't usually notice, but if there is not enough valid mapped memory
beyond the end of the string, the read of unmapped memory will
segfault. This was flagged by the Cirrus CI build with address
sanitizer enabled.
2. The memcpy() in injection_point_cache_add() failed to copy the NULL
terminator.
Discussion: https://www.postgresql.org/message-id/0615a424-b726-4157-afa7-4245629f9512%40iki.fi
When a pipeline is opened with \startpipeline and not closed, pgbench
will either error on the next transaction with a "already in pipeline
mode" error or successfully end if this was the last transaction --
despite not sending anything that was piped in the pipeline.
Make it an error to reach end of script is reached while there's an
open pipeline.
Backpatch to 14, where pgbench got support for pipelines.
Author: Anthonin Bonnefoy <anthonin.bonnefoy@datadoghq.com>
Reported-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/Za4IObZkDjrO4TcS@paquier.xyz
This was previously fixed in 9e215378d but got broken again as a result
of 2489d76c4. It seems that commit causes ppi_clauses to contain
duplicate clauses and it's no longer safe to check the list_length of
that list to determine if there are join conditions other than what's
mentioned in ppi_clauses.
Here we adjust the check to count the distinct rinfo_serial mentioned in
ppi_clauses. We expect that extra->restrictlist won't have duplicate
rinfo_serials.
Reported-by: Amadeo Gallardo
Author: Richard Guo
Discussion: https://postgr.es/m/CADFREbW-BLJd7-a5J%2B5wjVumeFG1ByXiSOFzMtkmY_SDWckTxw%40mail.gmail.com
Backpatch-through: 16, where 2489d76c4 was introduced.
This provides basic coverage for injection points within a single
process, while providing some callbacks that can be used for other
tests. There are plans to extend this module later with more
advanced capabilities for tests.
Author: Michael Paquier, with comment fixes from Ashutosh Bapat.
Reviewed-by: Ashutosh Bapat, Nathan Bossart, Álvaro Herrera, Dilip
Kumar, Amul Sul, Nazir Bilal Yavuz
Discussion: https://postgr.es/m/ZTiV8tn_MIb_H2rE@paquier.xyz
Injection points are a new facility that makes possible for developers
to run custom code in pre-defined code paths. Its goal is to provide
ways to design and run advanced tests, for cases like:
- Race conditions, where processes need to do actions in a controlled
ordered manner.
- Forcing a state, like an ERROR, FATAL or even PANIC for OOM, to force
recovery, etc.
- Arbitrary sleeps.
This implements some basics, and there are plans to extend it more in
the future depending on what's required. Hence, this commit adds a set
of routines in the backend that allows developers to attach, detach and
run injection points:
- A code path calling an injection point can be declared with the macro
INJECTION_POINT(name).
- InjectionPointAttach() and InjectionPointDetach() to respectively
attach and detach a callback to/from an injection point. An injection
point name is registered in a shmem hash table with a library name and a
function name, which will be used to load the callback attached to an
injection point when its code path is run.
Injection point names are just strings, so as an injection point can be
declared and run by out-of-core extensions and modules, with callbacks
defined in external libraries.
This facility is hidden behind a dedicated switch for ./configure and
meson, disabled by default.
Note that backends use a local cache to store callbacks already loaded,
cleaning up their cache if a callback has found to be removed on a
best-effort basis. This could be refined further but any tests but what
we have here was fine with the tests I've written while implementing
these backend APIs.
Author: Michael Paquier, with doc suggestions from Ashutosh Bapat.
Reviewed-by: Ashutosh Bapat, Nathan Bossart, Álvaro Herrera, Dilip
Kumar, Amul Sul, Nazir Bilal Yavuz
Discussion: https://postgr.es/m/ZTiV8tn_MIb_H2rE@paquier.xyz
When evaluating a query with a multi-column GROUP BY clause, we can minimize
sort operations or avoid them if we synchronize the order of GROUP BY clauses
with the ORDER BY sort clause or sort order, which comes from the underlying
query tree. Grouping does not imply any ordering, so we can compare
the keys in arbitrary order, and a Hash Agg leverages this. But for Group Agg,
we simply compared keys in the order specified in the query. This commit
explores alternative ordering of the keys, trying to find a cheaper one.
The ordering of group keys may interact with other parts of the query, some of
which may not be known while planning the grouping. For example, there may be
an explicit ORDER BY clause or some other ordering-dependent operation higher up
in the query, and using the same ordering may allow using either incremental
sort or even eliminating the sort entirely.
The patch always keeps the ordering specified in the query, assuming the user
might have additional insights.
This introduces a new GUC enable_group_by_reordering so that the optimization
may be disabled if needed.
Discussion: https://postgr.es/m/7c79e6a5-8597-74e8-0671-1c39d124c9d6%40sigaev.ru
Author: Andrei Lepikhov, Teodor Sigaev
Reviewed-by: Tomas Vondra, Claudio Freire, Gavin Flower, Dmitry Dolgov
Reviewed-by: Robert Haas, Pavel Borisov, David Rowley, Zhihong Yu
Reviewed-by: Tom Lane, Alexander Korotkov, Richard Guo, Alena Rybakina
Target columns in UPDATE ... SET must not be qualified with the target
table; we disallow this because it'd create ambiguity about which name
is the column name in case of field-qualified names. However, newbies
have been seen to expect that they could qualify a target name just
like other names. The error message when they do is confusing:
"column "foo" of relation "foo" does not exist". To improve matters,
issue a HINT if the invalid name is qualified and matches the
relation's alias.
James Coleman (editorialized a bit by me)
Discussion: https://postgr.es/m/CAAaqYe8S2Qa060UV-YF5GoSd5PkEhLV94x-fEi3=TOtpaXCV+w@mail.gmail.com
These support functions will transform expressions with constant
range values into direct comparisons on the range bound values,
which are frequently better-optimizable. The transformation is
skipped however if it would require double evaluation of a
volatile or expensive element expression.
Along the way, add the range opfamily OID to range typcache entries,
since load_rangetype_info has to compute that anyway and it seems
silly to duplicate the work later.
Kim Johan Andersson and Jian He, reviewed by Laurenz Albe
Discussion: https://postgr.es/m/94f64d1f-b8c0-b0c5-98bc-0793a34e0851@kimmet.dk
Presently, the most straightforward way for a shared library to use
shared memory is to request it at server startup via a
shmem_request_hook, which requires specifying the library in
shared_preload_libraries. Alternatively, the library can create a
dynamic shared memory (DSM) segment, but absent a shared location
to store the segment's handle, other backends cannot use it. This
commit introduces a registry for DSM segments so that these other
backends can look up existing segments with a library-specified
string. This allows libraries to easily use shared memory without
needing to request it at server startup.
The registry is accessed via the new GetNamedDSMSegment() function.
This function handles allocating the segment and initializing it
via a provided callback. If another backend already created and
initialized the segment, it simply attaches the segment.
GetNamedDSMSegment() locks the registry appropriately to ensure
that only one backend initializes the segment and that all other
backends just attach it.
The registry itself is comprised of a dshash table that stores the
DSM segment handles keyed by a library-specified string.
Reviewed-by: Michael Paquier, Andrei Lepikhov, Nikita Malakhov, Robert Haas, Bharath Rupireddy, Zhang Mingli, Amul Sul
Discussion: https://postgr.es/m/20231205034647.GA2705267%40nathanxps13
Since 5a1dfde833, 2PC filenames use FullTransactionId. Thus, it needs to
convert TransactionId to FullTransactionId in StandbyTransactionIdIsPrepared()
using TransamVariables->nextXid. However, ProcArrayApplyRecoveryInfo()
first releases locks with usage StandbyTransactionIdIsPrepared(), then advances
TransamVariables->nextXid. This sequence of actions could cause errors.
This commit makes ProcArrayApplyRecoveryInfo() advance
TransamVariables->nextXid before releasing locks.
Reported-by: Thomas Munro, Michael Paquier
Discussion: https://postgr.es/m/CA%2BhUKGLj_ve1_pNAnxwYU9rDcv7GOhsYXJt7jMKSA%3D5-6ss-Cw%40mail.gmail.com
Discussion: https://postgr.es/m/Zadp9f4E1MYvMJqe%40paquier.xyz
This is support function 12 for the GiST AM and translates
"well-known" RT*StrategyNumber values into whatever strategy number is
used by the opclass (since no particular numbers are actually
required). We will use this to support temporal PRIMARY
KEY/UNIQUE/FOREIGN KEY/FOR PORTION OF functionality.
This commit adds two implementations, one for internal GiST opclasses
(just an identity function) and another for btree_gist opclasses. It
updates btree_gist from 1.7 to 1.8, adding the support function for
all its opclasses.
Author: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+renyUApHgSZF9-nd-a0+OPGharLQLO=mDHcY4_qQ0+noCUVg@mail.gmail.com
Given an already-initialized hash state and a NUL-terminated string,
accumulate the hash of the string into the hash state and return the
length for the caller to (optionally) save for the finalizer. This
avoids a strlen call.
If the string pointer is aligned, we can use a word-at-a-time
algorithm for NUL lookahead. The aligned case is only used on 64-bit
platforms, since it's not worth the extra complexity for 32-bit.
Handling the tail of the string after finishing the word-wise loop
was inspired by NetBSD's strlen(), but no code was taken since that
is written in assembly language.
As demonstration, use this in the search path cache. This brings the
general case performance closer to the special case optimization done
in commit a86c61c9ee. There are other places that could benefit, but
that is left for future work.
Jeff Davis and John Naylor
Reviewed by Heikki Linnakangas, Jian He, Junwang Zhao
Discussion: https://postgr.es/m/3820f030fd008ff14134b3e9ce5cc6dd623ed479.camel%40j-davis.com
Discussion: https://postgr.es/m/b40292c99e623defe5eadedab1d438cf51a4107c.camel%40j-davis.com
It can be useful for a hash function to expose separate initialization,
accumulation, and finalization steps. In particular, this is useful
for building inline hash functions for simplehash. Instead of trying
to whack around hash_bytes while maintaining its current behavior on
all platforms, we base this work on fasthash (MIT licensed) which
is simple, faster than hash_bytes for inputs over 12 bytes long,
and also passes the hash function testing suite SMHasher.
The fasthash functions have been reimplemented using our added-on
incremental interface to validate that this method will still give
the same answer, provided we have the input length ahead of time.
This functionality lives in a new header hashfn_unstable.h. The name
implies we have the freedom to change things across versions that
would be unacceptable for our other hash functions that are used for
e.g. hash indexes and hash partitioning. As such, these should only
be used for in-memory data structures like hash tables. There is also
no guarantee of being independent of endianness or pointer size.
As demonstration, use fasthash for pgstat_hash_hash_key. Previously
this called the 32-bit murmur finalizer on the three elements,
then joined them with hash_combine(). The new function is simpler,
faster and takes up less binary space. While the collision and bias
behavior were almost certainly fine with the previous coding, now we
have objective confidence of that.
There are other places that could benefit from this, but that is left
for future work.
Reviewed by Jeff Davis, Heikki Linnakangas, Jian He, Junwang Zhao
Credit to Andres Freund for the idea
Discussion: https://postgr.es/m/20231122223432.lywt4yz2bn7tlp27%40awork3.anarazel.de
All commands accepting arguments, handling them with OT_NORMAL, OT_SQLID
or OT_SQLIDHACK, should call ignore_slash_options() in inactive branch
to scan and discard extra arguments. All the backslash commands that
handle arguments do so, except \bind.
This commit adds the missing ignore_slash_options to \bind's inactive
branch. This inconsistency is a logic bug, however the behavior happens
to be unchanged as any extra arguments are discarded later in
HandleSlashCmds(), so no backpatch is done.
While on it, this adds \bind to the list of backslash commands where
inactive \if branches are checked in the tests for psql.
Reported-by: Jelte Fennema-Nio
Author: Anthonin Bonnefoy
Discussion: https://postgr.es/m/CAGECzQR1+udGKz+FbHiCQ7CWDiF1fCGi2xYuvQUODdMAfJbaLA@mail.gmail.com
This commit adds some notes about the inability to remove superuser
privileges from the bootstrap superuser. This has been blocked
since commit e530be2c5c, but it wasn't intended be a supported
feature before that, either.
In passing, change "bootstrap user" to "bootstrap superuser" in a
couple places.
Author: Yurii Rashkovskii
Reviewed-by: Vignesh C, David G. Johnston
Discussion: https://postgr.es/m/CA%2BRLCQzSx_eTC2Fch0EzeNHD3zFUcPvBYOoB%2BpPScFLch1DEQw%40mail.gmail.com
Some code in DiscreteKnapsack() attempted to zero all words in a
Bitmapset by performing bms_del_members() to delete all the members from
itself before replacing those members with members from another set.
When that code was written, this was a valid way to manipulate the set
in such a way to save from palloc having to be called to allocate a new
Bitmapset. However, 00b41463c modified Bitmapsets so that an empty set is
*always* represented as NULL and this breaks the optimization as the
Bitmapset code will always pfree the memory when the set becomes empty.
Since DiscreteKnapsack() has been coded to avoid as many unneeded
allocations as possible, it seems risky to not fix this. Here we add
bms_replace_members() to effectively perform an in-place copy of another
set, reusing the memory of the existing set, when possible.
This got broken in v16, but no backpatch for now as there've been no
complaints.
Reviewed-by: Richard Guo
Discussion: https://postgr.es/m/CAApHDvoTCBkBU2PJghNOFUiO0q=QP4WAWHi5sJP6_4=b2WodrA@mail.gmail.com
plpgsql fails on new-style CREATE FUNCTION/PROCEDURE commands within
a routine or DO block, because make_execsql_stmt believes that a
semicolon token always terminates a SQL command. Now, that's actually
been wrong since the day it was written, because CREATE RULE has long
allowed multiple rule actions separated by semicolons. But there are
few enough people using multi-action rules that there was never an
attempt to fix it. New-style SQL functions, though, are popular.
psql has this same problem of "does this semicolon really terminate
the command?". It deals with CREATE RULE by counting parenthesis
nesting depth: a semicolon within parens doesn't end a command.
Commits e717a9a18 and 029c5ac03 created a similar heuristic to count
matching BEGIN/END pairs (but only within CREATEs, so as not to be
fooled by plain BEGIN). That's survived several releases now without
trouble reports, so let's just absorb those heuristics into plpgsql.
Per report from Samuel Dussault. Back-patch to v14 where new-style
SQL function syntax came in.
Discussion: https://postgr.es/m/YT2PR01MB88552C3E9AD40A6C038774A781722@YT2PR01MB8855.CANPRD01.PROD.OUTLOOK.COM
Commit cb970240f1 moved some code from
lazy_scan_heap() to lazy_scan_prune(), and now some things that used to
need to be passed back and forth are completely local to lazy_scan_prune().
Hence, this struct is mostly obsolete. The only thing that still
needs to be passed back to the caller is has_lpdead_items, and that's
also passed back by lazy_scan_noprune(), so do it the same way in both
cases.
Melanie Plageman, reviewed and slightly revised by me.
Discussion: http://postgr.es/m/CAAKRu_aM=OL85AOr-80wBsCr=vLVzhnaavqkVPRkFBtD0zsuLQ@mail.gmail.com
Most of the output parameters of lazy_scan_prune() were being
used to update the VM in lazy_scan_heap(). Moving that code into
lazy_scan_prune() simplifies lazy_scan_heap() and requires less
communication between the two.
This change permits some further code simplification, but that
is left for a separate commit.
Melanie Plageman, reviewed by me.
Discussion: http://postgr.es/m/CAAKRu_aM=OL85AOr-80wBsCr=vLVzhnaavqkVPRkFBtD0zsuLQ@mail.gmail.com
If there are no indexes on a relation, items can be marked LP_UNUSED
instead of LP_DEAD when pruning. This significantly reduces WAL
volume, since we no longer need to emit one WAL record for pruning
and a second to change the LP_DEAD line pointers thus created to
LP_UNUSED.
Melanie Plageman, reviewed by Andres Freund, Peter Geoghegan, and me
Discussion: https://postgr.es/m/CAAKRu_bgvb_k0gKOXWzNKWHt560R0smrGe3E8zewKPs8fiMKkw%40mail.gmail.com
Due to the commit c5385929 which made all Perl warnings to fatal, use
of PostgreSQL::Test::Cluster:psql() and safe_psql() with timeout
started to fail with the following error:
Use of uninitialized value $ret in bitwise and (&) at
..src/test/perl/PostgreSQL/Test/Cluster.pm line 2015.
Fix that by placing $ret conversion code in psql() in an if (defined
$ret) block.
With this change, the behavior of psql() becomes same as before, that
is, the whole function returns undef on timeout, which is usefully
different from returning 0.
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/06f899fd-1826-05ab-42d6-adeb1fd5e200%40eisentraut.org
A REINDEX INDEX done on a partitioned index builds a list of the indexes
to work on before processing its partitions in individual transactions.
When combined with a DROP of the partitioned index, there was a window
where it was possible to see some unexpected "could not open relation
with OID", synonym of relation lookup error. The code was robust enough
to handle the case where the parent relation is missing, but not the
case where an index would be gone missing.
This is similar to 1d65416661.
Support for REINDEX on partitioned relations has been introduced in
a6642b3ae0, so backpatch down to 14.
Author: Fei Changhong
Discussion: https://postgr.es/m/tencent_6A52106095ACDE55333E3AD33F304C0C3909@qq.com
Backpatch-through: 14
try_index_open() is able to open an index if its relkind fits, except
that it would return NULL instead of generated an error if the relation
does not exist. This new routine will be used by an upcoming patch to
make REINDEX on partitioned relations more robust when an index in a
partition tree is dropped.
Extracted from a larger patch by the same author.
Author: Fei Changhong
Discussion: https://postgr.es/m/tencent_6A52106095ACDE55333E3AD33F304C0C3909@qq.com
Backpatch-through: 14
The query checks that pg_database.dathasloginevt is unset on connect when
there are no event triggers. However, unsetting this flag is implemented in
a non-blocking way, so a concurrent autovacuum connection breaks this check.
It doesn't seem we can do much with this, at least within a regression test.
So, remove it.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/44807d19-81a6-3884-3e0f-22dd99aac3ed%40gmail.com
The comment was copy-pasted from the call to ProcSignalInit() in
AuxiliaryProcessMain(), which uses a similar scheme of having reserved
slots for aux processes after MaxBackends slots for backends. However,
ProcSignalInit() indexing starts from 1, whereas BackendStatusArray
starts from 0. The code is correct, but the comment was wrong.
Discussion: https://www.postgresql.org/message-id/f3ecd4cb-85ee-4e54-8278-5fabfb3a4ed0@iki.fi
Backpatch-through: v14
If configuring the newly created socket non-blocking fails we
error out and return INVALID_SOCKET, but the socket that had
been created wasn't closed. Fix by issuing closesocket in the
errorpath.
Backpatch to all supported branches.
Author: Ranier Vilela <ranier.vf@gmail.com>
Discussion: https://postgr.es/m/CAEudQApmU5CrKefH85VbNYE2y8H=-qqEJbg6RAPU65+vCe+89A@mail.gmail.com
Backpatch-through: v12
These comments explained how these functions behave internally, and the
equivalent is described in the documentation section dedicated to the
pipeline mode of libpq. Let's remove these comments, getting rid of the
duplication with the docs.
Reported-by: Álvaro Herrera
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/202401150949.wq7ynlmqxphy@alvherre.pgsql
This commit adds XML_PARSE_HUGE to the libxml2 functions used in core
for the parsing of XML objects, raising up the original limit of 10MB
supported by libxml2.
In most code paths of upstream, XML_MAX_TEXT_LENGTH (10^7) is the
historical limit that gets upgraded to XML_MAX_HUGE_LENGTH (10^9) once
XML_PARSE_HUGE is given to the parser calls. These are still limited by
any palloc() calls for text, up to 1GB.
This offers the possibility to handle within the backend XML objects
larger than 10MB in general, with also a higher depth limit. This
change affects the contrib module xml2, the xml data type and SQL/XML.
Author: Dmitry Koval
Reviewed-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/18274-98d16bc03520665f@postgresql.org
Currently, when source data contains unexpected data regarding data type or
range, the entire COPY fails. However, in some cases, such data can be ignored
and just copying normal data is preferable.
This commit adds a new option SAVE_ERROR_TO, which specifies where to save the
error information. When this option is specified, COPY skips soft errors and
continues copying.
Currently, SAVE_ERROR_TO only supports "none". This indicates error information
is not saved and COPY just skips the unexpected data and continues running.
Later works are expected to add more choices, such as 'log' and 'table'.
Author: Damir Belyalov, Atsushi Torikoshi, Alex Shulgin, Jian He
Discussion: https://postgr.es/m/87k31ftoe0.fsf_-_%40commandprompt.com
Reviewed-by: Pavel Stehule, Andres Freund, Tom Lane, Daniel Gustafsson,
Reviewed-by: Alena Rybakina, Andy Fan, Andrei Lepikhov, Masahiko Sawada
Reviewed-by: Vignesh C, Atsushi Torikoshi
7d58f2342 added a compile-time option to have bitmapset.c reallocate the
set before returning when a set is modified. That commit failed to do
its job in various cases and returned the input set when it shouldn't
have in these cases. Here we fix those missing cases.
This commit also adds some documentation about what
REALLOCATE_BITMAPSETS is for. This is important as future functions
that go inside bitmapset.c need to know if they need to do anything
special when this compile-time option is defined.
Also, between 71a3e8c43 and 7d58f2342 some Asserts seem to have become
duplicated. Tidy these up. Rather than having the Assert check each
aspect of what makes a set invalid, here we introduce a helper function
which returns false when a set is invalid and have the Asserts use this
instead.
Also, make a pass on improving the comments in bitmapset.c. Various
comments mentioned the input sets being "recycled". This could be
interpreted to mean that the output set will always point to the same
memory as the given input parameter. Here we try to make it clear that
this must not be relied upon and that callers must ensure that all
references to a given set are updated on each modification.
In passing, improve comments for bms_union(), bms_intersect() and
bms_difference() to detail what they do. I (David) have too often had to
remind myself by reading the code each time to find out if I need, for
example, to use bms_union() or bms_join(). I also removed some
low-value comments that were trying to convey information about "these
operations" without mentioning which operations it was talking about.
It seems better to document these things in the function header comment
instead.
Author: Richard Guo, David Rowley
Discussion: https://postgr.es/m/CAMbWs4-djy9qYux2gZrtmxA0StrYXJjvB-oqLxn-d7J88t=PQQ@mail.gmail.com
Previously, when lazy_scan_noprune() was called and returned true, we would
update the FSM immediately if the relation had no indexes or if the page
contained no dead items. On the other hand, when lazy_scan_prune() was
called, we would update the FSM if either of those things was true or
if index vacuuming was disabled. Eliminate that behavioral difference by
considering vacrel->do_index_vacuuming in both cases.
Also, make lazy_scan_heap() responsible for deciding whether to update
the FSM, instead of doing it inside lazy_scan_noprune(). This is
more consistent with the lazy_scan_prune() case. lazy_scan_noprune()
still needs an output parameter for whether there are LP_DEAD items
on the page, but the real decision-making now happens in the caller.
Patch by me, reviewed by Peter Geoghegan and Melanie Plageman.
Discussion: http://postgr.es/m/CA+TgmoaOzvN1TcHd9iej=PR3fY40En1USxzOnXSR2CxCLaRM0g@mail.gmail.com
Previously, identity columns were disallowed on partitioned tables.
(The reason was mainly that no one had gotten around to working
through all the details to make it work.) This makes it work now.
Some details on the behavior:
* A newly created partition inherits identity property
The partitions of a partitioned table are integral part of the
partitioned table. A partition inherits identity columns from the
partitioned table. An identity column of a partition shares the
identity space with the corresponding column of the partitioned
table. In other words, the same identity column across all
partitions of a partitioned table share the same identity space.
This is effected by sharing the same underlying sequence.
When INSERTing directly into a partition, the sequence associated
with the topmost partitioned table is used to calculate the value of
the corresponding identity column.
In regular inheritance, identity columns and their properties in a
child table are independent of those in its parent tables. A child
table does not inherit identity columns or their properties
automatically from the parent. (This is unchanged.)
* Attached partition inherits identity column
A table being attached as a partition inherits the identity property
from the partitioned table. This should be fine since we expect
that the partition table's column has the same type as the
partitioned table's corresponding column. If the table being
attached is a partitioned table, the identity properties are
propagated down its partition hierarchy.
An identity column in the partitioned table is also marked as NOT
NULL. The corresponding column in the partition needs to be marked
as NOT NULL for the attach to succeed.
* Drop identity property when detaching partition
A partition's identity column shares the identity space
(i.e. underlying sequence) as the corresponding column of the
partitioned table. If a partition is detached it can longer share
the identity space as before. Hence the identity columns of the
partition being detached loose their identity property.
When identity of a column of a regular table is dropped it retains
the NOT NULL constraint that came with the identity property.
Similarly the columns of the partition being detached retain the NOT
NULL constraints that came with identity property, even though the
identity property itself is lost.
The sequence associated with the identity property is linked to the
partitioned table (and not the partition being detached). That
sequence is not dropped as part of detach operation.
* Partitions with their own identity columns are not allowed.
* The usual ALTER operations (add identity column, add identity
property to existing column, alter properties of an indentity
column, drop identity property) are supported for partitioned
tables. Changing a column only in a partitioned table or a
partition is not allowed; the change needs to be applied to the
whole partition hierarchy.
Author: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://www.postgresql.org/message-id/flat/CAExHW5uOykuTC+C6R1yDSp=o8Q83jr8xJdZxgPkxfZ1Ue5RRGg@mail.gmail.com
As in c27f8621ee et al.
Not as critical as other cases we've handled, but I figure if we're
going to add JsonbTableRoutine using TableFuncRoutine, this makes it
easier to jump around the code.
Commit b8ba7344e9 added in PQgetResult a derefence to a pointer
returned by pqPrepareAsyncResult(), before some other code that was
already testing that pointer for nullness. But since commit
618c16707a (in Postgres 15), pqPrepareAsyncResult() doesn't ever
return NULL (a statically-allocated result is returned if OOM). So in
branches 15 and up, we can remove the redundant pointer check with no
harm done.
However, in branch 14, pqPrepareAsyncResult() can indeed return NULL if
it runs out of memory. Fix things there by adding a null pointer check
before dereferencing the pointer. This should hint Coverity that the
preexisting check is not redundant but necessary.
Backpatch to 14, like b8ba7344e9.
Per Coverity.
This new function is equivalent to PQpipelineSync(), except that it does
not flush anything to the server except if the size threshold of the
output buffer is reached; the user must subsequently call PQflush()
instead.
Its purpose is to reduce the system call overhead of pipeline mode, by
giving to applications more control over the timing of the flushes when
manipulating commands in pipeline mode.
Author: Anton Kirilov
Reviewed-by: Jelte Fennema-Nio, Robert Haas, Álvaro Herrera, Denis
Laxalde, Michael Paquier
Discussion: https://postgr.es/m/CACV6eE5arHFZEA717=iKEa_OewpVFfWJOmsOdGrqqsr8CJVfWQ@mail.gmail.com
When removing a useless join, we'd remove PHVs that are not used at join
partner rels or above the join. A PHV that references the join's relid
in ph_eval_at is logically "above" the join and thus should not be
removed. We have the following check for that:
!bms_is_member(ojrelid, phinfo->ph_eval_at)
However, in the case of SJE removing a useless inner join, 'ojrelid' is
set to -1, which would trigger the "negative bitmapset member not
allowed" error in bms_is_member().
Fix it by skipping examining ojrelid for inner joins in this check.
Reported-by: Zuming Jiang
Bug: #18260
Discussion: https://postgr.es/m/18260-1b6a0c4ae311b837%40postgresql.org
Author: Richard Guo
Reviewed-by: Andrei Lepikhov
Most of these tests have been introduced in 6dd8b00807, to check for
behaviors related to hashing and hash plans, and money is a data type
with btree support but no hash functions. These tests are switched to
use varbit instead, to provide the same coverage.
Some other tests historically used money but don't really need it for
what they wanted to test (see rules.sql). Plans and coverage are
unchanged after the modifications done here.
Support for money may be removed a a later point, but this needs more
discussion.
Discussion: https://postgr.es/m/18240-c5da758d7dc1ecf0@postgresql.org
When ExecBRUpdateTriggers switches to a new target tuple as a result
of the EvalPlanQual logic, it must form a new proposed update tuple.
Since commit 86dc90056, that tuple (the result of
ExecGetUpdateNewTuple) has been a virtual tuple that might contain
pointers to by-ref fields of the new target tuple (in "oldslot").
However, immediately after that we materialize oldslot, causing it to
drop its buffer pin, whereupon the by-ref pointers are unsafe to use.
This is a live bug only when the new target tuple is in a different
page than the original target tuple, since we do still hold a pin on
the original one. (Before 86dc90056, there was no bug because the
EPQ plantree would hold a pin on the new target tuple; but now that's
not assured.) To fix, forcibly materialize the new tuple before we
materialize oldslot. This costs nothing since we would have done that
shortly anyway.
The real-world impact of this is probably minimal. A visible failure
could occur if the new target tuple's buffer were recycled for some
other page in the short interval before we materialize newslot within
the trigger-calling loop; but that's quite unlikely given that we'd
just touched that page. There's a larger hazard that some other
process could prune and repack that page within the window. We have
lock on the new target tuple, but that wouldn't prevent it being moved
on the page.
Alexander Lakhin and Tom Lane, per bug #17798 from Alexander Lakhin.
Back-patch to v14 where 86dc90056 came in.
Discussion: https://postgr.es/m/17798-0907404928dcf0dd@postgresql.org
The pg_amcheck test reports a skip message if the layout of the index
does not match expectations. That message includes the bytes that
were expected and the ones that were found. But the found ones are
arbitrary bytes, which can have funny effects on the terminal when
they are printed. To avoid that, escape non-word characters before
printing.
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Discussion: https://www.postgresql.org/message-id/flat/3f96f079-64e5-468a-8a19-cb481f0d31e5%40eisentraut.org
We've long had a policy that any toasted fields in a catalog tuple
should be pulled in-line before entering the tuple in a catalog cache.
However, that requires access to the catalog's toast table, and we'll
typically do AcceptInvalidationMessages while opening the toast table.
So it's possible that the catalog tuple is outdated by the time we
finish detoasting it. Since no cache entry exists yet, we can't
mark the entry stale during AcceptInvalidationMessages, and instead
we'll press forward and build an apparently-valid cache entry. The
upshot is that we have a race condition whereby an out-of-date entry
could be made in a backend's catalog cache, and persist there
indefinitely causing indeterminate misbehavior.
To fix, use the existing systable_recheck_tuple code to recheck
whether the catalog tuple is still up-to-date after we finish
detoasting it. If not, loop around and restart the process of
searching the catalog and constructing cache entries from the top.
The case is rare enough that this shouldn't create any meaningful
performance penalty, even in the SearchCatCacheList case where
we need to tear down and reconstruct the whole list.
Indeed, the case is so rare that AFAICT it doesn't occur during
our regression tests, and there doesn't seem to be any easy way
to build a test that would exercise it reliably. To allow
testing of the retry code paths, add logic (in USE_ASSERT_CHECKING
builds only) that randomly pretends that the recheck failed about
one time out of a thousand. This is enough to ensure that we'll
pass through the retry paths during most regression test runs.
By adding an extra level of looping, this commit creates a need
to reindent most of SearchCatCacheMiss and SearchCatCacheList.
I'll do that separately, to allow putting those changes in
.git-blame-ignore-revs.
Patch by me; thanks to Alexander Lakhin for having built a test
case to prove the bug is real, and to Xiaoran Wang for review.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/1393953.1698353013@sss.pgh.pa.us
Discussion: https://postgr.es/m/CAGjhLkOoBEC9mLsnB42d3CO1vcMx71MLSEuigeABbQ8oRdA6gw@mail.gmail.com
This changes the pg_attribute field attstattarget into a nullable
field in the variable-length part of the row. If no value is set by
the user for attstattarget, it is now null instead of previously -1.
This saves space in pg_attribute and tuple descriptors for most
practical scenarios. (ATTRIBUTE_FIXED_PART_SIZE is reduced from 108
to 104.) Also, null is the semantically more correct value.
The ANALYZE code internally continues to represent the default
statistics target by -1, so that that code can avoid having to deal
with null values. But that is now contained to the ANALYZE code.
Only the DDL code deals with attstattarget possibly null.
For system columns, the field is now always null. The ANALYZE code
skips system columns anyway.
To set a column's statistics target to the default value, the new
command form ALTER TABLE ... SET STATISTICS DEFAULT can be used. (SET
STATISTICS -1 still works.)
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://www.postgresql.org/message-id/flat/4da8d211-d54d-44b9-9847-f2a9f1184c76@eisentraut.org
A superuser may create a subscription with password_required=true, but
which uses a connection string without a password.
Previously, if the owner of such a subscription was changed to a
non-superuser, the non-superuser was able to utilize a password from
another source (like a password file or the PGPASSWORD environment
variable), which should not have been allowed.
This commit adds a step to re-validate the connection string before
connecting.
Reported-by: Jeff Davis
Author: Vignesh C
Reviewed-by: Peter Smith, Robert Haas, Amit Kapila
Discussion: https://www.postgresql.org/message-id/flat/e5892973ae2a80a1a3e0266806640dae3c428100.camel%40j-davis.com
Backpatch-through: 16
BuildDescForRelation() has all the knowledge for converting a
ColumnDef into pg_attribute/tuple descriptor. ATExecAddColumn() can
make use of that, instead of duplicating all that logic. We just pass
a one-element list of ColumnDef and we get back exactly the data
structure we need. Note that we don't even need to touch
BuildDescForRelation() to make this work.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://www.postgresql.org/message-id/flat/52a125e4-ff9a-95f5-9f61-b87cf447e4da@eisentraut.org
It missed a entry for tmp_check/ generated by the tests. While on it,
append a slash at the beginning of "pg_walsummary" to restrict its check
to the current directory, like anywhere else.
Oversights in ee1bfd1683.
jit.c and dfgr.c had a copy of the same code to check if a file exists
or not, with a twist: jit.c did not check for EACCES when failing the
stat() call for the path whose existence is tested. This refactored
routine will be used by an upcoming patch.
Reviewed-by: Ashutosh Bapat
Discussion: https://postgr.es/m/ZTiV8tn_MIb_H2rE@paquier.xyz
This is a rework of 7021d3b176, where we relied on forcing
max_logical_replication_workers to 0 in the postgres command. This
commit now prevents logical replication launchers to start using -b and
a backend-side check based on IsBinaryUpgrade, effective when upgrading
from 17 and newer versions.
This commit improves the comments explaining why this restriction is
necessary.
This discussion was on hold until we were sure how to add support for
subscribers in pg_upgrade, something now done thanks to 9a17be1e24.
Reviewed-by: Álvaro Herrera, Amit Kapila, Tom Lane
Discussion: https://postgr.es/m/ZU2TeVkUg5qEi7Oy@paquier.xyz
The code for wrapping subquery output expressions in PlaceHolderVars
believed that if the expression already was a PlaceHolderVar, it was
never necessary to wrap that in another one. That's wrong if the
expression is underneath an outer join and involves a lateral
reference to outside that scope: failing to add an additional PHV
risks evaluating the expression at the wrong place and hence not
forcing it to null when the outer join should do so. This is an
oversight in commit 9e7e29c75, which added logic to forcibly wrap
lateral-reference Vars in PlaceHolderVars, but didn't see that the
adjacent case for PlaceHolderVars needed the same treatment.
The test case we have for this doesn't fail before 4be058fe9, but now
that I see the problem I wonder if it is possible to demonstrate
related errors before that. That's moot though, since all such
branches are out of support.
Per bug #18284 from Holger Reise. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/18284-47505a20c23647f8@postgresql.org
Instead, just have lazy_scan_prune() and lazy_scan_noprune() update
LVRelState->nonempty_pages directly. This makes the two functions
more similar and also removes makes lazy_scan_noprune need one fewer
output parameters.
Melanie Plageman, reviewed by Andres Freund, Michael Paquier, and me
Discussion: http://postgr.es/m/CAAKRu_btji_wQdg=ok-5E4v_bGVxKYnnFFe7RA6Frc1EcOwtSg@mail.gmail.com
pg_combinebackup had various problems:
* strncpy was used in various places where strlcpy should be used
instead, to avoid any possibility of the result not being
\0-terminated.
* scan_for_existing_tablespaces() failed to close the directory,
and an error when opening the directory was reported with the
wrong pathname.
* write_reconstructed_file() contained some redundant and therefore
dead code.
* flush_manifest() didn't check the result of pg_checksum_update()
as we do in other places, and misused a local pathname variable
that shouldn't exist at all.
In pg_basebackup, the wrong variable name was used in one place,
due to a copy and paste that was not properly adjusted.
In blkreftable.c, the loop incorrectly doubled chunkno instead of
max_chunks. Fix that. Also remove a nearby assertion per repeated
off-list complaints from Tom Lane.
Per Coverity and subsequent code inspection by me and by Tom Lane.
Discussion: http://postgr.es/m/CA+Tgmobvqqj-DW9F7uUzT-cQqs6wcVb-Xhs=w=hzJnXSE-kRGw@mail.gmail.com
This can dump the contents of the WAL summary files found in
pg_wal/summaries. Normally, this shouldn't really be something anyone
needs to do, but it may be needed for debugging problems with
incremental backup, or could possibly be useful to external tools.
Discussion: http://postgr.es/m/CA+Tgmobvqqj-DW9F7uUzT-cQqs6wcVb-Xhs=w=hzJnXSE-kRGw@mail.gmail.com
This makes it possible to access information about the progress
of WAL summarization from SQL. The previously-added functions
pg_available_wal_summaries() and pg_wal_summary_contents() only
examine on-disk state, but this function exposes information from
the server's shared memory.
Discussion: http://postgr.es/m/CA+Tgmobvqqj-DW9F7uUzT-cQqs6wcVb-Xhs=w=hzJnXSE-kRGw@mail.gmail.com
During upgrade, when pg_restore performs CREATE DATABASE, bgwriter or
checkpointer may flush buffers and hold a file handle for pg_largeobject,
so later TRUNCATE pg_largeobject command will fail if OS (such as older
Windows versions) doesn't remove an unlinked file completely till it's
open. The probability of seeing this behavior is higher in this test
because we use wal_level as logical via allows_streaming => 'logical'
which in turn set shared_buffers as 1MB and make it more probable for
bgwriter to hold the file handle.
Diagnosed-by: Alexander Lakhin
Author: Hayato Kuroda, Amit Kapila
Reviewed-by: Alexander Lakhin
Discussion: https://postgr.es/m/TYAPR01MB5866AB7FD922CE30A2565B8BF5A8A@TYAPR01MB5866.jpnprd01.prod.outlook.com
In commit 3e51b278d I (tgl) caused initdb to leave lc_messages and
other lc_xxx GUCs commented-out in the installed postgresql.conf file
if they were going to be set to 'C'. This was a hack for cosmetic
purposes, and it was buggy because lc_messages' wired-in default is
not 'C' but '' (empty string). That led to --no-locale not having
the expected effect, since the postmaster would then obtain
lc_messages from its startup environment.
Let's just revert to the prior behavior of always de-commenting the
lc_xxx entries; the argument for changing that longstanding behavior
was weak in the first place.
Also, fix postgresql.conf.sample's erroneous claim that the default
value of lc_messages is 'C'. I suspect that was what misled me into
making this mistake in the first place.
Report and patch by Kyotaro Horiguchi. Back-patch to v16 where
the problem was introduced.
Discussion: https://postgr.es/m/20231122.162700.1995154567625541112.horikyota.ntt@gmail.com
Many psql backslash commands tolerate trailing semicolons, even
though that's not part of the official syntax. These did not.
They tried to, by passing semicolon = true to psql_scan_slash_option,
but that function ignored this parameter in OT_WHOLE_LINE mode.
Teach it to do the right thing, and remove the now-duplicative
logic in exec_command_help.
Discussion: https://postgr.es/m/2012251.1704746912@sss.pgh.pa.us
These were not testing the same thing as the comparable Assert
in calc_nestloop_required_outer(), because we neglected to map
the given Paths' relids to top-level relids. When considering
a partition child join the latter is the correct thing to do.
This oversight is old, but since it's only an overly-weak Assert
check there doesn't seem to be much value in back-patching.
Richard Guo (with cosmetic changes and comment updates by me)
Discussion: https://postgr.es/m/CAMbWs49sqbe9GBZ8sy8dSfKRNURgicR85HX8vgzcgQsPF0XY1w@mail.gmail.com
Commit 9d9c02ccd, which added the notion of a "run condition" for
window functions, neglected to teach nodeFuncs.c to process the new
field. Remarkably, that doesn't seem to have had any ill effects
before we invented Var.varnullingrels, but now it can cause visible
failures in join-removal scenarios.
I have no faith that there's not reachable problems in v15 too,
so back-patch the code change to v15 where 9d9c02ccd came in.
The test case seems irrelevant to v15, though.
Per bug #18277 from Zuming Jiang. Diagnosis and patch by
Richard Guo.
Discussion: https://postgr.es/m/18277-089ead83b329a2fd@postgresql.org
On Windows, cmd.exe is used to launch the postmaster process to ease its
redirection setup. However, cmd.exe may execute other programs at
startup due to autorun configurations, which could influence the
postmaster startup. This patch adds /D flag to the launcher cmd.exe
command line to disable autorun settings written in the registry.
This is arguably a bug, but no backpatch is done now out of caution.
Reported-by: Hayato Kuroda
Author: Kyotaro Horiguchi
Reviewed-by: Robert Haas, Michael Paquier
Discussion: https://postgr.es/m/20230922.161551.320043332510268554.horikyota.ntt@gmail.com
Both lwlocknames.txt and wait_event_names.txt contain a list of all
the predefined LWLocks, i.e., those with predefined positions
within MainLWLockArray. It is easy to miss one or the other,
especially since the list in wait_event_names.txt omits the "Lock"
suffix from all the LWLock wait events. This commit adds a cross-
check of these lists to the script that generates lwlocknames.h.
If the lists do not match exactly, building will fail.
Suggested-by: Robert Haas
Reviewed-by: Robert Haas, Michael Paquier, Bertrand Drouvot
Discussion: https://postgr.es/m/20240102173120.GA1061678%40nathanxps13
Essentially this moves the non-interactive part of psql's "\password"
command into an exported client function. The password is not sent to the
server in cleartext because it is "encrypted" (in the case of scram and md5
it is actually hashed, but we have called these encrypted passwords for a
long time now) on the client side. This is good because it ensures the
cleartext password is never known by the server, and therefore won't end up
in logs, pg_stat displays, etc.
In other words, it exists for the same reason as PQencryptPasswordConn(), but
is more convenient as it both builds and runs the "ALTER USER" command for
you. PQchangePassword() uses PQencryptPasswordConn() to do the password
encryption. PQencryptPasswordConn() is passed a NULL for the algorithm
argument, hence encryption is done according to the server's
password_encryption setting.
Also modify the psql client to use the new function. That provides a builtin
test case. Ultimately drivers built on top of libpq should expose this
function and its use should be generally encouraged over doing ALTER USER
directly for password changes.
Author: Joe Conway
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/flat/b75955f7-e8cc-4bbd-817f-ef536bacbe93%40joeconway.com
The target relation for INSERT/UPDATE/DELETE/MERGE has a different behavior
than other relations in EvalPlanQual() and RETURNING clause. This is why we
forbid target relation to be either source or target relation in SJE.
It's not clear if we could ever support this.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/b9e8f460-f9a6-0e9b-e8ba-60d59f0bc22c%40gmail.com
When SJE uses RelOptInfo.unique_for_rels cache, it passes filtered quals to
innerrel_is_unique_ext(). That might lead to an invalid match to cache entries
made by previous non self-join checking calls. Add UniqueRelInfo.self_join
flag to prevent such cases. Also, fix that SJE should require a strict match
of outerrelids to make sure UniqueRelInfo.extra_clauses are valid.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/4788f781-31bd-9796-d7d6-588a751c8787%40gmail.com
This replaces dblink's blocking libpq calls, allowing cancellation and
allowing DROP DATABASE (of a database not involved in the query). Apart
from explicit dblink_cancel_query() calls, dblink still doesn't cancel
the remote side. The replacement for the blocking calls consists of
new, general-purpose query execution wrappers in the libpqsrv facility.
Out-of-tree extensions should adopt these. Use them in postgres_fdw,
replacing a local implementation from which the libpqsrv implementation
derives. This is a bug fix for dblink. Code inspection identified the
bug at least thirteen years ago, but user complaints have not appeared.
Hence, no back-patch for now.
Discussion: https://postgr.es/m/20231122012945.74@rfd.leadboat.com
Since commit 599b33b94, this function assumed that every RTE_RELATION
RangeTblEntry would have an associated RelOptInfo. But that's not so:
we only build RelOptInfos for relations that are scanned by the query.
In particular the target of an INSERT won't have one, so that Vars
appearing in an INSERT ... RETURNING list will not have an associated
RelOptInfo. This apparently wasn't a problem before commit f7816aec2
taught examine_simple_variable() to drill down into CTEs containing
INSERT RETURNING, but it is now.
To fix, add a fallback code path that gets the userid to use directly
from the RTEPermissionInfo associated with the RTE. (Sadly, we must
have two code paths, because not every RTE has a RTEPermissionInfo
either.)
Per report from Alexander Lakhin. No back-patch, since the case is
apparently unreachable before f7816aec2.
Discussion: https://postgr.es/m/608a4886-6c60-0f9e-97d5-591256bd4150@gmail.com
During the calculations of the maximum for the number of buckets, take into
account that later we round that to the next power of 2.
Reported-by: Karen Talarico
Bug: #16925
Discussion: https://postgr.es/m/16925-ec96d83529d0d629%40postgresql.org
Author: Thomas Munro, Andrei Lepikhov, Alexander Korotkov
Reviewed-by: Alena Rybakina
Backpatch-through: 12
When the SJE code handles the transfer of qual clauses from the removed
relation to the remaining one, it replaces the Vars of the removed
relation with the Vars of the remaining relation for each clause, and
then reintegrates these clauses into the appropriate restriction or join
clause lists, while attempting to avoid duplicates.
However, the code compares RestrictInfo->clause to determine if two
clauses are duplicates. This is just flat wrong. Two RestrictInfos
with the same clause can have different required_relids,
incompatible_relids, is_pushed_down, and so on. This can cause qual
clauses to be mistakenly omitted, leading to wrong results.
This patch fixes it by comparing the entire RestrictInfos not just their
clauses ignoring 'rinfo_serial' field (otherwise almost all RestrictInfos will
be unique). Making 'rinfo_serial' equal_ignore would break other code. This
is why this commit implements our own comparison function for checking the
equality of RestrictInfos.
Reported-by: Zuming Jiang
Bug: #18261
Discussion: https://postgr.es/m/18261-2a75d748c928609b%40postgresql.org
Author: Richard Guo
Support referencing a composite-type variable in %TYPE.
Remove the undocumented, untested, and pretty useless ability
to have the subject of %TYPE be an (unqualified) type name.
You get the same result by just not writing %TYPE.
Add or adjust some test cases to improve code coverage here.
Discussion: https://postgr.es/m/716852.1704402127@sss.pgh.pa.us
A typo has been introduced by 31966b151e when updating the state of a
local buffer when a temporary relation is extended, for the case of a
block included in the relation range extended, when it is already found
in the hash table holding the local buffers. In this case, BM_VALID
should be cleared, but the buffer state was changed so as BM_VALID
remained while clearing the other flags.
As reported on the thread, it was possible to corrupt the state of the
local buffers on ENOSPC, but the states would be corrupted on any kind
of ERROR during the relation extend (like partial writes or some other
errno).
Reported-by: Alexander Lakhin
Author: Tender Wang
Reviewed-by: Richard Guo, Alexander Lakhin, Michael Paquier
Discussion: https://postgr.es/m/18259-6e256429825dd435@postgresql.org
Backpatch-through: 16
If we have DECHIST statistics about the argument expression, use
the average number of distinct elements as the array length estimate.
(It'd be better to use the average total number of elements, but
that is not currently calculated by compute_array_stats(), and
it's unclear that it'd be worth extra effort to get.)
To do this, we have to change the signature of estimate_array_length
to pass the "root" pointer. While at it, also change its result
type to "double". That's probably not really necessary, but it
avoids any risk of overflow of the value extracted from DECHIST.
All existing callers are going to use the result in a "double"
calculation anyway.
Paul Jungwirth, reviewed by Jian He and myself
Discussion: https://postgr.es/m/CA+renyUnM2d+SmrxKpDuAdpiq6FOM=FByvi6aS6yi__qyf6j9A@mail.gmail.com
Many foreach loops only use the ListCell pointer to retrieve the
content of the cell, like so:
ListCell *lc;
foreach(lc, mylist)
{
int myint = lfirst_int(lc);
...
}
This commit adds a few convenience macros that automatically
declare the loop variable and retrieve the current cell's contents.
This allows us to rewrite the previous loop like this:
foreach_int(myint, mylist)
{
...
}
This commit also adjusts a few existing loops in order to add
coverage for the new/adjusted macros. There is presently no plan
to bulk update all foreach loops, as that could introduce a
significant amount of back-patching pain. Instead, these macros
are primarily intended for use in new code.
Author: Jelte Fennema-Nio
Reviewed-by: David Rowley, Alvaro Herrera, Vignesh C, Tom Lane
Discussion: https://postgr.es/m/CAGECzQSwXKnxGwW1_Q5JE%2B8Ja20kyAbhBHO04vVrQsLcDciwXA%40mail.gmail.com
This adds a new ALTER TABLE subcommand ALTER COLUMN ... SET EXPRESSION
that changes the generation expression of a generated column.
The syntax is not standard but was adapted from other SQL
implementations.
This command causes a table rewrite, using the usual ALTER TABLE
mechanisms. The implementation is similar to and makes use of some of
the infrastructure of the SET DATA TYPE subcommand (for example,
rebuilding constraints and indexes afterwards). The new command
requires a new pass in AlterTablePass, and the ADD COLUMN pass had to
be moved earlier so that combinations of ADD COLUMN and SET EXPRESSION
can work.
Author: Amul Sul <sulamul@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAAJ_b94yyJeGA-5M951_Lr+KfZokOp-2kXicpmEhi5FXhBeTog@mail.gmail.com
1349d2790 added code to allow DISTINCT and ORDER BY aggregates to work
more efficiently by using presorted input. That commit added some code
that made use of the AggState's tmpcontext and adjusted the
ecxt_outertuple and ecxt_innertuple slots before checking if the current
row is distinct from the previously seen row. That code forgot to set the
TupleTableSlots back to what they were originally, which could result in
errors such as:
ERROR: attribute 1 of type record has wrong type
This only affects aggregate functions which have multiple arguments when
DISTINCT is used. For example: string_agg(DISTINCT col, ', ')
Thanks to Tom Lane for identifying the breaking commit.
Bug: #18264
Reported-by: Vojtěch Beneš
Discussion: https://postgr.es/m/18264-e363593d7e9feb7d@postgresql.org
Backpatch-through: 16, where 1349d2790 was added
This patch changes the existing 'conflicting' field to 'conflict_reason'
in pg_replication_slots. This new field indicates the reason for the
logical slot's conflict with recovery. It is always NULL for physical
slots, as well as for logical slots which are not invalidated. The
non-NULL values indicate that the slot is marked as invalidated. Possible
values are:
wal_removed = required WAL has been removed.
rows_removed = required rows have been removed.
wal_level_insufficient = the primary doesn't have a wal_level sufficient
to perform logical decoding.
The existing users of 'conflicting' column can get the same answer by
using 'conflict_reason' IS NOT NULL.
Author: Shveta Malik
Reviewed-by: Amit Kapila, Bertrand Drouvot, Michael Paquier
Discussion: https://postgr.es/m/ZYOE8IguqTbp-seF@paquier.xyz
CheckPWChallengeAuth() would return STATUS_ERROR if the user does not
exist or has no password assigned, even if the client disconnected
without responding to the password challenge (as libpq often will,
for example). We should return STATUS_EOF in that case, and the
lower-level functions do, but this code level got it wrong since the
refactoring done in 7ac955b34. This breaks the intent of not logging
anything for EOF cases (cf. comments in auth_failed()) and might
also confuse users of ClientAuthentication_hook.
Per report from Liu Lang. Back-patch to all supported versions.
Discussion: https://postgr.es/m/b725238c-539d-cb09-2bff-b5e6cb2c069c@esgyn.cn
Second attempt at 283a95da92. Since we can't reorder the enum values
of JsonPathItemType, instead reorder the switch cases where they are
used to generally follow the order of the enum values, for better
maintainability.
This reverts commit 283a95da92.
The reordering of JsonPathItemType affects the binary on-disk
compatibility of the jsonpath type, so we must not change it. Revert
for now and consider.
Swap the arguments to TimestampDifferenceMilliseconds so that we get
a positive answer instead of zero.
Then use the result of that computation instead of ignoring it.
Per reports from Alexander Lakhin.
Discussion: http://postgr.es/m/8b686764-7ac1-74c3-70f9-b64685a2535f@gmail.com
New TAP tests added by commits 9a17be1e and 4710b67d missed to convert
warnings to FATAL. This commit fixes that.
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Some of the TAP tests have been historically setting the environment
variable PGDATABASE to 'postgres', which is not needed because
PostgreSQL::Test::Cluster already sets it when initialized. This commit
removes these explicit setups.
Note that the dependency of cluster -a with PGDATABASE (from
1caef31d9e) is still documented.
Author: Bharath Rupireddy
Discussion: https://postgr.es/m/CALj2ACXLAz5dW3ZP+Fec8g6jQMMmDyCVT+qdbye2h7QJJmhsdw@mail.gmail.com
Avoid leaving a dangling pointer in the unlikely event that
nsphash_create fails. Improve comments, and fix formatting by
adding typedefs.list entries.
Discussion: https://postgr.es/m/3972900.1704145107@sss.pgh.pa.us
This feature will allow us to replicate the changes on subscriber nodes
after the upgrade.
Previously, only the subscription metadata information was preserved.
Without the list of relations and their state, it's not possible to
re-enable the subscriptions without missing some records as the list of
relations can only be refreshed after enabling the subscription (and
therefore starting the apply worker). Even if we added a way to refresh
the subscription while enabling a publication, we still wouldn't know
which relations are new on the publication side, and therefore should be
fully synced, and which shouldn't.
To preserve the subscription relations, this patch teaches pg_dump to
restore the content of pg_subscription_rel from the old cluster by using
binary_upgrade_add_sub_rel_state SQL function. This is supported only
in binary upgrade mode.
The subscription's replication origin is needed to ensure that we don't
replicate anything twice.
To preserve the replication origins, this patch teaches pg_dump to update
the replication origin along with creating a subscription by using
binary_upgrade_replorigin_advance SQL function to restore the
underlying replication origin remote LSN. This is supported only in
binary upgrade mode.
pg_upgrade will check that all the subscription relations are in 'i'
(init) or in 'r' (ready) state and will error out if that's not the case,
logging the reason for the failure. This helps to avoid the risk of any
dangling slot or origin after the upgrade.
Author: Vignesh C, Julien Rouhaud, Shlok Kyal
Reviewed-by: Peter Smith, Masahiko Sawada, Michael Paquier, Amit Kapila, Hayato Kuroda
Discussion: https://postgr.es/m/20230217075433.u5mjly4d5cr4hcfe@jrouhaud
The brinbuildCallbackParallel callback used by parallel BRIN builds did
not consider that the parallel table scans may be synchronized, starting
from an arbitrary block and then wrap around.
If this happened and the scan actually did wrap around, tuples from the
beginning of the table were added to the last range produced by the same
worker. The index would be missing range at the beginning of the table,
while the last range would be too wide. This would not produce incorrect
query results, but it'd be less efficient.
Fixed by checking for both past and future ranges in the callback. The
worker may produce multiple summaries for the same page range, but the
leader will merge them as if the summaries came from different workers.
Discussion: https://postgr.es/m/c2ee7d69-ce17-43f2-d1a0-9811edbda6e6%40enterprisedb.com
Commit b437571714 added support for parallel builds for BRIN indexes,
using code similar to BTREE parallel builds, and also a new tuplesort
variant. This commit simplifies the new code in two ways:
* The "spool" grouping tuplesort and the heap/index is not necessary.
The heap/index are available as separate arguments, causing confusion.
So remove the spool, and use the tuplesort directly.
* The new tuplesort variant does not need the heap/index, as it sorts
simply by the range block number, without accessing the tuple data.
So simplify that too.
Initial report and patch by Ranier Vilela, further cleanup by me.
Author: Ranier Vilela
Discussion: https://postgr.es/m/CAEudQAqD7f2i4iyEaAz-5o-bf6zXVX-AkNUBm-YjUXEemaEh6A%40mail.gmail.com
Commit 16671ba6e7 moved the code that sends "sorry, too many clients
already" and other such messages, but it had the effect that we would
send that error even if the the startup packet processing failed, e.g.
because the client sent an invalid startup packet. That was not
intentional.
Spotted while reading the code again.
When enabled (default off), this logs a backtrace anytime elog() or an
equivalent ereport() for internal errors is called.
This is not well covered by the existing backtrace_functions, because
there are many equally-worded low-level errors in many functions. And
if you find out where the error is, then you need to manually rewrite
the elog() to ereport() to attach the errbacktrace(), which is
annoying. Having a backtrace automatically on every elog() call could
be very helpful during development for various kinds of common errors
from palloc, syscache, node support, etc.
Discussion: https://www.postgresql.org/message-id/flat/ba76c6bc-f03f-4285-bf16-47759cfcab9e@eisentraut.org
There are a lot of Perl scripts in the tree, mostly code generation
and TAP tests. Occasionally, these scripts produce warnings. These
are probably always mistakes on the developer side (true positives).
Typical examples are warnings from genbki.pl or related when you make
a mess in the catalog files during development, or warnings from tests
when they massage a config file that looks different on different
hosts, or mistakes during merges (e.g., duplicate subroutine
definitions), or just mistakes that weren't noticed because there is a
lot of output in a verbose build.
This changes all warnings into fatal errors, by replacing
use warnings;
by
use warnings FATAL => 'all';
in all Perl files.
Discussion: https://www.postgresql.org/message-id/flat/06f899fd-1826-05ab-42d6-adeb1fd5e200%40eisentraut.org
If the underlying table isn't being dumped, it's useless to dump
an extended statistics object; it'll just cause errors at restore.
We have always applied similar policies to, say, indexes.
(When and if we get cross-table stats objects, it might be profitable
to think a little harder about what to do with them. But for now
there seems no point in considering a stats object as anything but
an appendage of its table.)
Rian McGuire and Tom Lane, per report from Rian McGuire.
Back-patch to supported branches.
Discussion: https://postgr.es/m/7075d3aa-3f05-44a5-b68f-47dc6a8a0550@buildkite.com
This function was originally coded with a handmade expansion
of the array subscripts. We can do it a little faster and far
more legibly today, by using unnest() WITH ORDINALITY.
While at it, let's apply the rowcount estimation support that exists
for the underlying unnest() function: reduce the default ROWS estimate
to 100 and attach array_unnest_support. I'm not sure that
array_unnest_support can do anything useful today with the call sites
that exist in information_schema, but it can't hurt, and the existing
default rowcount of 1000 is surely much too high for any of these
cases.
The psql.sql regression script is using _pg_expandarray() as a
test case for \sf+. While we could keep doing so, the new one-line
function body makes a poor test case for \sf+ row-numbering, so
switch it to print another information_schema function.
Discussion: https://postgr.es/m/1424303.1703355485@sss.pgh.pa.us
add_file_to_manifest declared its mtime argument as pg_time_t,
apparently on the principle that copy-and-paste from the backend
is fine. However, the callers are passing struct stat's st_mtime
field which is plain time_t, and add_file_to_manifest itself is
passing the value to gmtime(3) which expects plain time_t,
so the whole thing would not work at all on any platform where
those types are different. Fortunately we can just switch this
variable to time_t.
Per warnings from assorted buildfarm members.
The code was passing a scalar argument to node->restart(), but it was
expecting a hash, which causes a warning from Perl ("Odd number of
elements in hash assignment").
But the node->restart() function doesn't take a mode argument anyway.
This was probably copied from an incorrect comment (see commit
750c59d7ec). The default restart mode is already "fast", so the test
should still be semantically correct without explicitly specifying the
mode.
Discussion: https://www.postgresql.org/message-id/e3f4bf1b-63d3-408a-b07e-d35a0fdf1b98@eisentraut.org
Recently-introduced code in reconstruct.c was using "unsigned"
to store the result of read(), pg_pread(), or write(). This is
completely bogus: it breaks subsequent tests for the result being
negative, as we're being reminded of by a chorus of buildfarm
warnings. Switch to "int" as was doubtless intended. (There are
several other uses of "unsigned" in this file that also look poorly
chosen to me, but for now I'm just trying to clean up the buildfarm.)
A larger problem is that "int" is not necessarily wide enough to hold
the result: per POSIX, all these functions return ssize_t. In places
where the requested read or write length clearly fits in int, that's
academic. It may be academic anyway as long as we constrain
individual data files to 1GB, since even a readv or writev-like
operation would then not be responsible for transferring more than
1GB. Nonetheless it seems like trouble waiting to happen, so I made
a pass over readv and writev calls and fixed the result variables
where that seemed appropriate. We might want to think about changing
some of the fd.c functions to return ssize_t too, for future-proofing;
but I didn't tackle that here.
Discussion: https://postgr.es/m/1672202.1703441340@sss.pgh.pa.us
I don't think there's a real problem here, because if we reach
the loop over 'tles' then we will either find at least one
TimeLineHistoryEntry such that oldest_segno != 0, in which case
unsummarized_lsn will be initialized, or else unsummarized_tli
will remain 0 and an error will occur before unsummarized_lsn
is used for anything. But some compilers are complainining, as
reported on list by Nathan Bossart and off-list by Andrew Dunstan.
Discussion: http://postgr.es/m/20231223215147.GA69623@nathanxps13
Nathan Bossart
Michael Paquier
Heikki Linnakangas
Alvaro Herrera
David Rowley
Alexander Korotkov
Tom Lane
Peter Eisentraut
John Naylor
Jeff Davis
Robert Haas
Daniel Gustafsson
Amit Kapila
Magnus Hagander
Joe Conway
Noah Misch
Andrew Dunstan
Bruce Momjian
Tomas Vondra