d140f2f3 has renamed receivedUpto to flushedUpto, and has added
writtenUpto to the WAL receiver's shared memory information, but
pg_stat_wal_receiver was not consistent with that. This commit renames
received_lsn to flushed_lsn, and adds a new column called written_lsn.
Bump catalog version.
Author: Michael Paquier
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/20200515090817.GA212736@paquier.xyz
The additional pain from level 4 is excessive for the gain.
Also revert all the source annotation changes to their original
wordings, to avoid back-patching pain.
Discussion: https://postgr.es/m/31166.1589378554@sss.pgh.pa.us
Use it at level 4, a bit more restrictive than the default level, and
tweak our commanding comments to FALLTHROUGH.
(However, leave zic.c alone, since it's external code; to avoid the
warnings that would appear there, change CFLAGS for that file in the
Makefile.)
Author: Julien Rouhaud <rjuju123@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20200412081825.qyo5vwwco3fv4gdo@nol
Discussion: https://postgr.es/m/flat/E1fDenm-0000C8-IJ@gemulon.postgresql.org
GetWalRcvWriteRecPtr() previously reported the latest *flushed*
location. Adopt the conventional terminology used elsewhere in the tree
by renaming it to GetWalRcvFlushRecPtr(), and likewise for some related
variables that used the term "received".
Add a new definition of GetWalRcvWriteRecPtr(), which returns the latest
*written* value. This will allow later patches to use the value for
non-data-integrity purposes, without having to wait for the flush
pointer to advance.
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq%3DAovOddfHpA%40mail.gmail.com
The definitions of the routines defined in xlogarchive.c have been part
of xlog_internal.h which is included by several frontend tools, but all
those routines are only called by the backend. More cleanup could be
done within xlog_internal.h, but that's already a nice cut.
This will help a follow-up patch for pg_rewind where handling of
restore_command is added for frontends.
Author: Alexey Kondratov, Michael Paquier
Reviewed-by: Álvaro Herrera, Alexander Korotkov
Discussion: https://postgr.es/m/a3acff50-5a0d-9a2c-b3b2-ee36168955c1@postgrespro.ru
The parameters primary_conninfo, primary_slot_name and
wal_receiver_create_temp_slot can now be changed with a simple "reload"
signal, no longer requiring a server restart. This is achieved by
signalling the walreceiver process to terminate and having it start
again with the new values.
Thanks to Andres Freund, Kyotaro Horiguchi, Fujii Masao for discussion.
Author: Sergei Kornilov <sk@zsrv.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/19513901543181143@sas1-19a94364928d.qloud-c.yandex.net
Commit 3297308278 gave walreceiver the ability to create and use a
temporary replication slot, and made it controllable by a GUC (enabled
by default) that can be changed with SIGHUP. That's useful but has two
problems: one, it's possible to cause the origin server to fill its disk
if the slot doesn't advance in time; and also there's a disconnect
between state passed down via the startup process and GUCs that
walreceiver reads directly.
We handle the first problem by setting the option to disabled by
default. If the user enables it, its on their head to make sure that
disk doesn't fill up.
We handle the second problem by passing the flag via startup rather than
having walreceiver acquire it directly, and making it PGC_POSTMASTER
(which ensures a walreceiver always has the fresh value). A future
commit can relax this (to PGC_SIGHUP again) by having the startup
process signal walreceiver to shutdown whenever the value changes.
Author: Sergei Kornilov <sk@zsrv.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20200122055510.GH174860@paquier.xyz
The init_ps_display() arguments were mostly lies by now, so to match
typical usage, just use one argument and let the caller assemble it
from multiple sources if necessary. The only user of the additional
arguments is BackendInitialize(), which was already doing string
assembly on the caller side anyway.
Remove the second argument of set_ps_display() ("force") and just
handle that in init_ps_display() internally.
BackendInitialize() also used to set the initial status as
"authentication", but that was very far from where authentication
actually happened. So now it's set to "initializing" and then
"authentication" just before the actual call to
ClientAuthentication().
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Kuntal Ghosh <kuntalghosh.2007@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/c65e5196-4f04-4ead-9353-6088c19615a3@2ndquadrant.com
The need for this was removed by
8b9e9644dc.
A number of files now need to include utils/acl.h or
parser/parse_node.h explicitly where they previously got it indirectly
somehow.
Since parser/parse_node.h already includes nodes/parsenodes.h, the
latter is then removed where the former was added. Also, remove
nodes/pg_list.h from objectaddress.h, since that's included via
nodes/parsenodes.h.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/7601e258-26b2-8481-36d0-dc9dca6f28f1%402ndquadrant.com
If no permanent replication slot is configured using
primary_slot_name, the walreceiver now creates and uses a temporary
replication slot. A new setting wal_receiver_create_temp_slot can be
used to disable this behavior, for example, if the remote instance is
out of replication slots.
Reviewed-by: Masahiko Sawada <masahiko.sawada@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/CA%2Bfd4k4dM0iEPLxyVyme2RAFsn8SUgrNtBJOu81YqTY4V%2BnqZA%40mail.gmail.com
A new function EmitProcSignalBarrier() can be used to emit a global
barrier which all backends that participate in the ProcSignal
mechanism must absorb, and a new function WaitForProcSignalBarrier()
can be used to wait until all relevant backends have in fact
absorbed the barrier.
This can be used to coordinate global state changes, such as turning
checksums on while the system is running.
There's no real client of this mechanism yet, although two are
proposed, but an enum has to have at least one element, so this
includes a placeholder type (PROCSIGNAL_BARRIER_PLACEHOLDER) which
should be replaced by the first real client of this mechanism to
get committed.
Andres Freund and Robert Haas, reviewed by Daniel Gustafsson and,
in earlier versions, by Magnus Hagander.
Discussion: http://postgr.es/m/CA+TgmoZwDk=BguVDVa+qdA6SBKef=PKbaKDQALTC_9qoz1mJqg@mail.gmail.com
Where possible, share signal handler code and main loop interrupt
checking. This saves quite a bit of code and should simplify
maintenance, too.
This commit intends not to change the way anything works, even
though that might allow more code to be unified. It does unify
a bunch of individual variables into a ShutdownRequestPending
flag that has is now used by a bunch of different process types,
though.
Patch by me, reviewed by Andres Freund and Daniel Gustafsson.
Discussion: http://postgr.es/m/CA+TgmoZwDk=BguVDVa+qdA6SBKef=PKbaKDQALTC_9qoz1mJqg@mail.gmail.com
XLogFileNameP() is a wrapper routine able to build a palloc'd string for
a WAL segment name, which is used for error string generation. There
were several code paths where it gets called in a critical section,
where memory allocation is not allowed. This results in triggering
an assertion failure instead of generating the wanted error message.
Another, more annoying, problem is that if the allocation to generate
the WAL segment name fails on OOM, then the failure would be escalated
to a PANIC.
This removes the routine and all its callers are replaced with a logic
using a fixed-size buffer. This way, all the existing mistakes are
fixed and future ones are prevented.
Author: Masahiko Sawada
Reviewed-by: Michael Paquier, Álvaro Herrera
Discussion: https://postgr.es/m/CA+fd4k5gC9H4uoWMLg9K_QfNrnkkdEw+-AFveob9YX7z8JnKTA@mail.gmail.com
AuxiliaryProcessMain does ProcSignalInit, so one might expect that
auxiliary processes would need to respond to SendProcSignal, but none
of the auxiliary processes do that. Change them to use
procsignal_sigusr1_handler instead of their own private handlers so
that they do. Besides seeming more correct, this is also less code. It
shouldn't make any functional difference right now because, as far as
we know, there are no current cases where SendProcSignal targets an
auxiliary process, but there are plans to change that in the future.
Andres Freund
Discussion: http://postgr.es/m/20181030051643.elbxjww5jjgnjaxg@alap3.anarazel.de
This is still using the 2.0 version of pg_bsd_indent.
I thought it would be good to commit this separately,
so as to document the differences between 2.0 and 2.1 behavior.
Discussion: https://postgr.es/m/16296.1558103386@sss.pgh.pa.us
This is quite unsafe, even for the case of ereport(FATAL) where we won't
return control to the interrupted code, and despite this code's use of
a flag to restrict the areas where we'd try to do it. It's possible
for example that we interrupt malloc or free while that's holding a lock
that's meant to protect against cross-thread interference. Then, any
attempt to do malloc or free within ereport() will result in a deadlock,
preventing the walreceiver process from exiting in response to SIGTERM.
We hypothesize that this explains some hard-to-reproduce failures seen
in the buildfarm.
Hence, get rid of the immediate-exit code in WalRcvShutdownHandler,
as well as the logic associated with WalRcvImmediateInterruptOK.
Instead, we need to take care that potentially-blocking operations
in the walreceiver's data transmission logic (libpqwalreceiver.c)
will respond reasonably promptly to the process's latch becoming
set and then call ProcessWalRcvInterrupts. Much of the needed code
for that was already present in libpqwalreceiver.c. I refactored
things a bit so that all the uses of PQgetResult use latch-aware
waiting, but didn't need to do much more.
These changes should be enough to ensure that libpqwalreceiver.c
will respond promptly to SIGTERM whenever it's waiting to receive
data. In principle, it could block for a long time while waiting
to send data too, and this patch does nothing to guard against that.
I think that that hazard is mostly theoretical though: such blocking
should occur only if we fill the kernel's data transmission buffers,
and we don't generally send enough data to make that happen without
waiting for input. If we find out that the hazard isn't just
theoretical, we could fix it by using PQsetnonblocking, but that
would require more ticklish changes than I care to make now.
This is a bug fix, but it seems like too big a change to push into
the back branches without much more testing than there's time for
right now. Perhaps we'll back-patch once we have more confidence
in the change.
Patch by me; thanks to Thomas Munro for review.
Discussion: https://postgr.es/m/20190416070119.GK2673@paquier.xyz
Instead of inferring epoch progress from xids and checkpoints,
introduce a 64 bit FullTransactionId type and use it to track xid
generation. This fixes an unlikely bug where the epoch is reported
incorrectly if the range of active xids wraps around more than once
between checkpoints.
The only user-visible effect of this commit is to correct the epoch
used by txid_current() and txid_status(), also visible with
pg_controldata, in those rare circumstances. It also creates some
basic infrastructure so that later patches can use 64 bit
transaction IDs in more places.
The new type is a struct that we pass by value, as a form of strong
typedef. This prevents the sort of accidental confusion between
TransactionId and FullTransactionId that would be possible if we
were to use a plain old uint64.
Author: Thomas Munro
Reported-by: Amit Kapila
Reviewed-by: Andres Freund, Tom Lane, Heikki Linnakangas
Discussion: https://postgr.es/m/CAA4eK1%2BMv%2Bmb0HFfWM9Srtc6MVe160WFurXV68iAFMcagRZ0dQ%40mail.gmail.com
Add a separate walreceiver API function walrcv_server_version() to get
the version of the remote server, instead of doing it as part of
walrcv_identify_system(). This allows the server version to be
available even for uses that don't call IDENTIFY_SYSTEM, and it seems
cleaner anyway.
This is for an upcoming patch, not currently used.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/20190115071359.GF1433@paquier.xyz
By default, the fallback_application_name for a physical walreceiver
is "walreceiver". This means that multiple standbys cannot be
distinguished easily on a primary, for example in pg_stat_activity or
synchronous_standby_names.
If cluster_name is set, use that for fallback_application_name in the
walreceiver. (If it's not set, it remains "walreceiver".) If someone
set cluster_name to identify their instance, we might as well use that
by default to identify the node remotely as well. It's still possible
to specify another application_name in primary_conninfo explicitly.
Reviewed-by: Euler Taveira <euler@timbira.com.br>
Discussion: https://www.postgresql.org/message-id/flat/1257eaee-4874-e791-e83a-46720c72cac7@2ndquadrant.com
Users of the WaitEventSet and WaitLatch() APIs can now choose between
asking for WL_POSTMASTER_DEATH and then handling it explicitly, or asking
for WL_EXIT_ON_PM_DEATH to trigger immediate exit on postmaster death.
This reduces code duplication, since almost all callers want the latter.
Repair all code that was previously ignoring postmaster death completely,
or requesting the event but ignoring it, or requesting the event but then
doing an unconditional PostmasterIsAlive() call every time through its
event loop (which is an expensive syscall on platforms for which we don't
have USE_POSTMASTER_DEATH_SIGNAL support).
Assert that callers of WaitLatchXXX() under the postmaster remember to
ask for either WL_POSTMASTER_DEATH or WL_EXIT_ON_PM_DEATH, to prevent
future bugs.
The only process that doesn't handle postmaster death is syslogger. It
waits until all backends holding the write end of the syslog pipe
(including the postmaster) have closed it by exiting, to be sure to
capture any parting messages. By using the WaitEventSet API directly
it avoids the new assertion, and as a by-product it may be slightly
more efficient on platforms that have epoll().
Author: Thomas Munro
Reviewed-by: Kyotaro Horiguchi, Heikki Linnakangas, Tom Lane
Discussion: https://postgr.es/m/CAEepm%3D1TCviRykkUb69ppWLr_V697rzd1j3eZsRMmbXvETfqbQ%40mail.gmail.com,
https://postgr.es/m/CAEepm=2LqHzizbe7muD7-2yHUbTOoF7Q+qkSD5Q41kuhttRTwA@mail.gmail.com
For reasons lost in the mists of time, most postmaster child processes
reset SIGTTIN/SIGTTOU signal handling to SIG_DFL, with the major exception
that backend sessions do not. It seems like a pretty bad idea for any
postmaster children to do that: if stderr is connected to the terminal,
and the user has put the postmaster in background, any log output would
result in the child process freezing up. Hence, switch them all to
doing what backends do, ie, nothing. This allows them to inherit the
postmaster's SIG_IGN setting. On the other hand, manually-launched
processes such as standalone backends will have default processing,
which seems fine.
In passing, also remove useless resets of SIGCONT and SIGWINCH signal
processing. Perhaps the postmaster once changed those to something
besides SIG_DFL, but it doesn't now, so these are just wasted (and
confusing) syscalls.
Basically, this propagates the changes made in commit 8e2998d8a from
backends to other postmaster children. Probably the only reason these
calls now exist elsewhere is that I missed changing pgstat.c along with
postgres.c at the time.
Given the lack of field complaints that can be traced to this, I don't
presently feel a need to back-patch.
Discussion: https://postgr.es/m/5627.1542477392@sss.pgh.pa.us
exit() is not async-signal safe. Even if the libc implementation is, 3rd
party libraries might have installed unsafe atexit() callbacks. After
receiving SIGQUIT, we really just want to exit as quickly as possible, so
we don't really want to run the atexit() callbacks anyway.
The original report by Jimmy Yih was a self-deadlock in startup_die().
However, this patch doesn't address that scenario; the signal handling
while waiting for the startup packet is more complicated. But at least this
alleviates similar problems in the SIGQUIT handlers, like that reported
by Asim R P later in the same thread.
Backpatch to 9.3 (all supported versions).
Discussion: https://www.postgresql.org/message-id/CAOMx_OAuRUHiAuCg2YgicZLzPVv5d9_H4KrL_OFsFP%3DVPekigA%40mail.gmail.com
Historically, we've allowed auxiliary processes to take buffer pins without
tracking them in a ResourceOwner. However, that creates problems for error
recovery. In particular, we've seen multiple reports of assertion crashes
in the startup process when it gets an error while holding a buffer pin,
as for example if it gets ENOSPC during a write. In a non-assert build,
the process would simply exit without releasing the pin at all. We've
gotten away with that so far just because a failure exit of the startup
process translates to a database crash anyhow; but any similar behavior
in other aux processes could result in stuck pins and subsequent problems
in vacuum.
To improve this, institute a policy that we must *always* have a resowner
backing any attempt to pin a buffer, which we can enforce just by removing
the previous special-case code in resowner.c. Add infrastructure to make
it easy to create a process-lifespan AuxProcessResourceOwner and clear
out its contents at appropriate times. Replace existing ad-hoc resowner
management in bgwriter.c and other aux processes with that. (Thus, while
the startup process gains a resowner where it had none at all before, some
other aux process types are replacing an ad-hoc resowner with this code.)
Also use the AuxProcessResourceOwner to manage buffer pins taken during
StartupXLOG and ShutdownXLOG, even when those are being run in a bootstrap
process or a standalone backend rather than a true auxiliary process.
In passing, remove some other ad-hoc resource owner creations that had
gotten cargo-culted into various other places. As far as I can tell
that was all unnecessary, and if it had been necessary it was incomplete,
due to lacking any provision for clearing those resowners later.
(Also worth noting in this connection is that a process that hasn't called
InitBufferPoolBackend has no business accessing buffers; so there's more
to do than just add the resowner if we want to touch buffers in processes
not covered by this patch.)
Although this fixes a very old bug, no back-patch, because there's no
evidence of any significant problem in non-assert builds.
Patch by me, pursuant to a report from Justin Pryzby. Thanks to
Robert Haas and Kyotaro Horiguchi for reviews.
Discussion: https://postgr.es/m/20180627233939.GA10276@telsasoft.com
Previously there was no way in the standby side to find out the host and port
of the sender server that the walreceiver was currently connected to when
multiple hosts and ports were specified in primary_conninfo. For that purpose,
this patch adds sender_host and sender_port columns into pg_stat_wal_receiver
view. They report the host and port that the active replication connection
currently uses.
Bump catalog version.
Author: Haribabu Kommi
Reviewed-by: Michael Paquier and me
Discussion: https://postgr.es/m/CAJrrPGcV_aq8=cdqkFhVDJKEnDQ70yRTTdY9RODzMnXNrCz2Ow@mail.gmail.com
25fff40798 introduced
default monitoring roles. Apply these corrections:
* Allow access to pg_stat_get_wal_senders()
by role pg_read_all_stats
* Correct comment in pg_stat_get_wal_receiver()
to show it is no longer superuser-only.
Author: Feike Steenbergen
Reviewed-by: Michael Paquier
Apply to HEAD, then later backpatch to 10
Commit 597a87ccc introduced a latch pointer variable to replace use
of a long-lived shared latch in the shared WalRcvData structure.
This was not well thought out, because there are now hazards of the
pointer variable changing while it's being inspected by another
process. This could obviously lead to a core dump in code like
if (WalRcv->latch)
SetLatch(WalRcv->latch);
and there's a more remote risk of a torn read, if we have any
platforms where reading/writing a pointer is not atomic.
An actual problem would occur only if the walreceiver process
exits (gracefully) while the startup process is trying to
signal it, but that seems well within the realm of possibility.
To fix, treat the pointer variable (not the referenced latch)
as being protected by the WalRcv->mutex spinlock. There
remains a race condition that we could apply SetLatch to a
process latch that no longer belongs to the walreceiver, but
I believe that's harmless: at worst it'd cause an extra wakeup
of the next process to use that PGPROC structure.
Back-patch to v10 where the faulty code was added.
Discussion: https://postgr.es/m/22735.1507048202@sss.pgh.pa.us
1. Since commit b1a9bad9e7 we had pstrdup() inside a
spinlock-protected critical section; reported by Andreas Seltenreich.
Turn those into strlcpy() to stack-allocated variables instead.
Backpatch to 9.6.
2. Since commit 9ed551e0a4 we had a pfree() uselessly inside a
spinlock-protected critical section. Tom Lane noticed in code review.
Move down. Backpatch to 9.6.
3. Since commit 64233902d2 we had GetCurrentTimestamp() (a kernel
call) inside a spinlock-protected critical section. Tom Lane noticed in
code review. Move it up. Backpatch to 9.2.
4. Since commit 1bb2558046 we did elog(PANIC) while holding spinlock.
Tom Lane noticed in code review. Release spinlock before dying.
Backpatch to 9.2.
Discussion: https://postgr.es/m/87h8vhtgj2.fsf@ansel.ydns.eu
For performance reasons a larger segment size than the default 16MB
can be useful. A larger segment size has two main benefits: Firstly,
in setups using archiving, it makes it easier to write scripts that
can keep up with higher amounts of WAL, secondly, the WAL has to be
written and synced to disk less frequently.
But at the same time large segment size are disadvantageous for
smaller databases. So far the segment size had to be configured at
compile time, often making it unrealistic to choose one fitting to a
particularly load. Therefore change it to a initdb time setting.
This includes a breaking changes to the xlogreader.h API, which now
requires the current segment size to be configured. For that and
similar reasons a number of binaries had to be taught how to recognize
the current segment size.
Author: Beena Emerson, editorialized by Andres Freund
Reviewed-By: Andres Freund, David Steele, Kuntal Ghosh, Michael
Paquier, Peter Eisentraut, Robert Hass, Tushar Ahuja
Discussion: https://postgr.es/m/CAOG9ApEAcQ--1ieKbhFzXSQPw_YLmepaa4hNdnY5+ZULpt81Mw@mail.gmail.com
In WAL receiver and WAL server, some accesses to their corresponding
shared memory control structs were done without holding any kind of
lock, which could lead to inconsistent and possibly insecure results.
In walsender, fix by clarifying the locking rules and following them
correctly, as documented in the new comment in walsender_private.h;
namely that some members can be read in walsender itself without a lock,
because the only writes occur in the same process. The rest of the
struct requires spinlock for accesses, as usual.
In walreceiver, fix by always holding spinlock while accessing the
struct.
While there is potentially a problem in all branches, it is minor in
stable ones. This only became a real problem in pg10 because of quorum
commit in synchronous replication (commit 3901fd70cc), and a potential
security problem in walreceiver because a superuser() check was removed
by default monitoring roles (commit 25fff40798). Thus, no backpatch.
In passing, clean up some leftover braces which were used to create
unconditional blocks. Once upon a time these were used for
volatile-izing accesses to those shmem structs, which is no longer
required. Many other occurrences of this pattern remain.
Author: Michaël Paquier
Reported-by: Michaël Paquier
Reviewed-by: Masahiko Sawada, Kyotaro Horiguchi, Thomas Munro,
Robert Haas
Discussion: https://postgr.es/m/CAB7nPqTWYqtzD=LN_oDaf9r-hAjUEPAy0B9yRkhcsLdRN8fzrw@mail.gmail.com
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Three nologin roles with non-overlapping privs are created by default
* pg_read_all_settings - read all GUCs.
* pg_read_all_stats - pg_stat_*, pg_database_size(), pg_tablespace_size()
* pg_stat_scan_tables - may lock/scan tables
Top level role - pg_monitor includes all of the above by default, plus others
Author: Dave Page
Reviewed-by: Stephen Frost, Robert Haas, Peter Eisentraut, Simon Riggs
If the upstream walsender is using a physical replication slot, store the
catalog_xmin in the slot's catalog_xmin field. If the upstream doesn't use a
slot and has only a PGPROC entry behaviour doesn't change, as we store the
combined xmin and catalog_xmin in the PGPROC entry.
Author: Craig Ringer
Twiddle the replication-related code so that its timestamp variables
are declared TimestampTz, rather than the uninformative "int64" that
was previously used for meant-to-be-always-integer timestamps.
This resolves the int64-vs-TimestampTz declaration inconsistencies
introduced by commit 7c030783a, though in the opposite direction to
what was originally suggested.
This required including datatype/timestamp.h in a couple more places
than before. I decided it would be a good idea to slim down that
header by not having it pull in <float.h> etc, as those headers are
no longer at all relevant to its purpose. Unsurprisingly, a small number
of .c files turn out to have been depending on those inclusions, so add
them back in the .c files as needed.
Discussion: https://postgr.es/m/26788.1487455319@sss.pgh.pa.us
Discussion: https://postgr.es/m/27694.1487456324@sss.pgh.pa.us
Hot_standby_feedback could be reset by reload and worked correctly, but if
the server was restarted rather than reloaded the xmin was not reset.
Force reset always if hot_standby_feedback is enabled at startup.
Ants Aasma, Craig Ringer
Reported-by: Ants Aasma
The whole walreceiver API is now wrapped into a struct, like most of our
other loadable module APIs. The libpq connection is no longer a global
variable in libpqwalreceiver. Instead, it is encapsulated into a struct
that is passed around the functions. This allows multiple walreceivers
to run at the same time.
Add some rudimentary support for logical replication connections to
libpqwalreceiver.
These changes are mostly cosmetic and are going to be useful for the
future logical replication patches.
From: Petr Jelinek <petr@2ndquadrant.com>
Replace use of poll()/select() by WaitLatchOrSocket(), which is more
portable and flexible.
Also change walreceiver to use its procLatch instead of a custom latch.
From: Petr Jelinek <petr@2ndquadrant.com>
"xlog" is not a particularly clear abbreviation for "write-ahead log",
and it sometimes confuses users into believe that the contents of the
"pg_xlog" directory are not critical data, leading to unpleasant
consequences. So, rename the directory to "pg_wal".
This patch modifies pg_upgrade and pg_basebackup to understand both
the old and new directory layouts; the former is necessary given the
purpose of the tool, while the latter merely avoids an unnecessary
backward-compatibility break.
We may wish to consider renaming other programs, switches, and
functions which still use the old "xlog" naming to also refer to
"wal". However, that's still under discussion, so let's do just this
much for now.
Discussion: CAB7nPqTeC-8+zux8_-4ZD46V7YPwooeFxgndfsq5Rg8ibLVm1A@mail.gmail.com
Michael Paquier
WaitLatch, WaitLatchOrSocket, and WaitEventSetWait now taken an
additional wait_event_info parameter; legal values are defined in
pgstat.h. This makes it possible to uniquely identify every point in
the core code where we are waiting for a latch; extensions can pass
WAIT_EXTENSION.
Because latches were the major wait primitive not previously covered
by this patch, it is now possible to see information in
pg_stat_activity on a large number of important wait events not
previously addressed, such as ClientRead, ClientWrite, and SyncRep.
Unfortunately, many of the wait events added by this patch will fail
to appear in pg_stat_activity because they're only used in background
processes which don't currently appear in pg_stat_activity. We should
fix this either by creating a separate view for such information, or
else by deciding to include them in pg_stat_activity after all.
Michael Paquier and Robert Haas, reviewed by Alexander Korotkov and
Thomas Munro.
There are two problems in the original coding: one is that if one
walreceiver process exits, the ready_to_display flag remains set in
shared memory, exposing the conninfo of the next walreceiver before
obfuscating. Fix by having WalRcvDie reset the flag.
Second, the sleep-and-retry behavior that waited until walreceiver had
set ready_to_display wasn't liked; the preference is to have it return
no data instead, so let's do that.
Bugs in 9ed551e0a reported by Fujii Masao and Michël Paquier.
Author: Michaël Paquier
Commit b1a9bad9e7 introduced a stats view to provide insight into the
running WAL receiver, but neglected to include the connection string in
it, as reported by Michaël Paquier. This commit fixes that omission.
(Any security-sensitive information is not disclosed).
While at it, close the mild security hole that we were exposing the
password in the connection string in shared memory. This isn't
user-accessible, but it still looks like a good idea to avoid having the
cleartext password in memory.
Author: Michaël Paquier, Álvaro Herrera
Review by: Vik Fearing
Discussion: https://www.postgresql.org/message-id/CAB7nPqStg4M561obo7ryZ5G+fUydG4v1Ajs1xZT1ujtu+woRag@mail.gmail.com
Commit 314cbfc5da redefined the signature of this hook as
typedef int (*walrcv_receive_type) (char **buffer, int *wait_fd);
But in fact the type of the "wait_fd" variable ought to be pgsocket,
which is what WaitLatchOrSocket expects, and which is necessary if
we want to be able to assign PGINVALID_SOCKET to it on Windows.
So fix that.
In this mode, the master waits for the transaction to be applied on
the remote side, not just written to disk. That means that you can
count on a transaction started on the standby to see all commits
previously acknowledged by the master.
To make this work, the standby sends a reply after replaying each
commit record generated with synchronous_commit >= 'remote_apply'.
This introduces a small inefficiency: the extra replies will be sent
even by standbys that aren't the current synchronous standby. But
previously-existing synchronous_commit levels make no attempt at all
to optimize which replies are sent based on what the primary cares
about, so this is no worse, and at least avoids any extra replies for
people not using the feature at all.
Thomas Munro, reviewed by Michael Paquier and by me. Some additional
tweaks by me.
This new view provides insight into the state of a running WAL receiver
in a HOT standby node.
The information returned includes the PID of the WAL receiver process,
its status (stopped, starting, streaming, etc), start LSN and TLI, last
received LSN and TLI, timestamp of last message send and receipt, latest
end-of-WAL LSN and time, and the name of the slot (if any).
Access to the detailed data is only granted to superusers; others only
get the PID.
Author: Michael Paquier
Reviewer: Haribabu Kommi
Prior to commit 0709b7ee72, access to
variables within a spinlock-protected critical section had to be done
through a volatile pointer, but that should no longer be necessary.
This continues work begun in df4077cda2
and 6ba4ecbf47.
Thomas Munro and Michael Paquier
The message tries to tell the replication apply delay which fails if
the first WAL record is not applied yet. Fix is, instead of telling
overflowed minus numeric, showing "N/A" which indicates that the delay
data is not yet available. Problem reported by me and patch by
Fabrízio de Royes Mello.
Back patched to 9.4, 9.3 and 9.2 stable branches (9.1 and 9.0 do not
have the debug message).
Move common code, that was duplicated in every postmaster child/every
standalone process, into two functions in miscinit.c. Not only does
that already result in a fair amount of net code reduction but it also
makes it much easier to remove more duplication in the future. The
prime motivation wasn't code deduplication though, but easier addition
of new common code.
The displayed sendtime and receipttime were always exactly equal, because
somebody forgot that timestamptz_to_str returns a static buffer (thereby
simplifying life for most callers, at the cost of complicating it for those
who need two results concurrently). Apply the same pstrdup solution used
by the other call sites with this issue. Back-patch to 9.2 where the
faulty code was introduced. Per bug #9849 from Haruka Takatsuka, though
this is not exactly his patch.
Possibly we should change timestamptz_to_str's API, but I wouldn't want
to do so in the back branches.
This feature, building on previous commits, allows the write-ahead log
stream to be decoded into a series of logical changes; that is,
inserts, updates, and deletes and the transactions which contain them.
It is capable of handling decoding even across changes to the schema
of the effected tables. The output format is controlled by a
so-called "output plugin"; an example is included. To make use of
this in a real replication system, the output plugin will need to be
modified to produce output in the format appropriate to that system,
and to perform filtering.
Currently, information can be extracted from the logical decoding
system only via SQL; future commits will add the ability to stream
changes via walsender.
Andres Freund, with review and other contributions from many other
people, including Álvaro Herrera, Abhijit Menon-Sen, Peter Gheogegan,
Kevin Grittner, Robert Haas, Heikki Linnakangas, Fujii Masao, Abhijit
Menon-Sen, Michael Paquier, Simon Riggs, Craig Ringer, and Steve
Singer.
WalSndKill was doing things exactly backwards: it should first clear
MyWalSnd (to stop signal handlers from touching MyWalSnd->latch),
then disown the latch, and only then mark the WalSnd struct unused by
clearing its pid field.
Also, WalRcvSigUsr1Handler and worker_spi_sighup failed to preserve
errno, which is surely a requirement for any signal handler.
Per discussion of recent buildfarm failures. Back-patch as far
as the relevant code exists.
Replication slots are a crash-safe data structure which can be created
on either a master or a standby to prevent premature removal of
write-ahead log segments needed by a standby, as well as (with
hot_standby_feedback=on) pruning of tuples whose removal would cause
replication conflicts. Slots have some advantages over existing
techniques, as explained in the documentation.
In a few places, we refer to the type of replication slots introduced
by this patch as "physical" slots, because forthcoming patches for
logical decoding will also have slots, but with somewhat different
properties.
Andres Freund and Robert Haas
Commit 6f60fdd701 accidentally removed a
call to XLogWalRcvSendHSFeedback() after flushing received WAL to disk.
The consequence is that when walsender is busy streaming WAL, it doesn't
send HS feedback messages. One is sent if nothing is received from the
master for 100ms, but if there's a steady stream of WAL, it never happens.
Backpatch to 9.3.
Andres Freund and Amit Kapila
This is a forward-patch of commit 6f4b8a4f4f,
applied to 9.2 back in August. The plan was to do something else in master,
but it looks like it's not going to happen, so let's just apply the 9.2
solution to master as well.
Fujii Masao
of timeline, take advantage of that in walreceiver.
Startup process is still in control of choosign the target timeline, by
scanning the timeline history files present in pg_xlog, but walreceiver now
uses the next timeline's ID to fetch its history file immediately after it
has finished streaming the old timeline. Before, the standby would first try
to restart streaming on the old timeline, which fetches the missing timeline
history file as a side-effect, and only then restart from the new timeline.
This patch eliminates the extra iteration, which speeds up the timeline
switch and reduces the noise in the log caused by the extra restart on the
old timeline.
The patch to allow pg_receivexlog to switch timeline added a result set
after copy has ended in START_STREAMING command, to return the next
timeline's ID to the client. But walreceived didn't get the memo, and threw
an error on the unexpected result set. Fix.
Streaming replication can fetch any missing timeline history files from the
master, but recovery would read the timeline history file for the target
timeline before reading the checkpoint record, and before walreceiver has
had a chance to fetch it from the master. Delay reading it, and the sanity
checks involving timeline history, until after reading the checkpoint
record.
There is at least one scenario where this makes a difference: if you take
a base backup from a standby server right after a timeline switch, the
WAL segment containing the initial checkpoint record will begin with an
older timeline ID. Without the timeline history file, recovering that file
will fail as the older timeline ID is not recognized to be an ancestor of
the target timeline. If you try to recover from such a backup, using only
streaming replication to fetch the WAL, this patch is required for that to
work.
This gets rid of XLByteLT, XLByteLE, XLByteEQ and XLByteAdvance.
These were useful for brevity when XLogRecPtrs were split in
xlogid/xrecoff; but now that they are simple uint64's, they are just
clutter. The only downside to making this change would be ease of
backporting patches, but that has been negated by other substantive
changes to the involved code anyway. The clarity of simpler expressions
makes the change worthwhile.
Most of the changes are mechanical, but in a couple of places, the patch
author chose to invert the operator sense, making the code flow more
logical (and more in line with preceding comments).
Author: Andres Freund
Eyeballed by Dimitri Fontaine and Alvaro Herrera
Most of the time, the last replayed record comes from the recovery target
timeline, but there is a corner case where it makes a difference. When
the startup process scans for a new timeline, and decides to change recovery
target timeline, there is a window where the recovery target TLI has already
been bumped, but there are no WAL segments from the new timeline in pg_xlog
yet. For example, if we have just replayed up to point 0/30002D8, on
timeline 1, there is a WAL file called 000000010000000000000003 in pg_xlog
that contains the WAL up to that point. When recovery switches recovery
target timeline to 2, a walsender can immediately try to read WAL from
0/30002D8, from timeline 2, so it will try to open WAL file
000000020000000000000003. However, that doesn't exist yet - the startup
process hasn't copied that file from the archive yet nor has the walreceiver
streamed it yet, so walsender fails with error "requested WAL segment
000000020000000000000003 has already been removed". That's harmless, in that
the standby will try to reconnect later and by that time the segment is
already created, but error messages that should be ignored are not good.
To fix that, have walsender track the TLI of the last replayed record,
instead of the recovery target timeline. That way walsender will not try to
read anything from timeline 2, until the WAL segment has been created and at
least one record has been replayed from it. The recovery target timeline is
now xlog.c's internal affair, it doesn't need to be exposed in shared memory
anymore.
This fixes the error reported by Thom Brown. depesz the same error message,
but I'm not sure if this fixes his scenario.
Before this patch, streaming replication would refuse to start replicating
if the timeline in the primary doesn't exactly match the standby. The
situation where it doesn't match is when you have a master, and two
standbys, and you promote one of the standbys to become new master.
Promoting bumps up the timeline ID, and after that bump, the other standby
would refuse to continue.
There's significantly more timeline related logic in streaming replication
now. First of all, when a standby connects to primary, it will ask the
primary for any timeline history files that are missing from the standby.
The missing files are sent using a new replication command TIMELINE_HISTORY,
and stored in standby's pg_xlog directory. Using the timeline history files,
the standby can follow the latest timeline present in the primary
(recovery_target_timeline='latest'), just as it can follow new timelines
appearing in an archive directory.
START_REPLICATION now takes a TIMELINE parameter, to specify exactly which
timeline to stream WAL from. This allows the standby to request the primary
to send over WAL that precedes the promotion. The replication protocol is
changed slightly (in a backwards-compatible way although there's little hope
of streaming replication working across major versions anyway), to allow
replication to stop when the end of timeline reached, putting the walsender
back into accepting a replication command.
Many thanks to Amit Kapila for testing and reviewing various versions of
this patch.
We used to send structs wrapped in CopyData messages, which works as long as
the client and server agree on things like endianess, timestamp format and
alignment. That's good enough for running a standby server, which has to run
on the same platform anyway, but it's useful for tools like pg_receivexlog
to work across platforms.
This breaks protocol compatibility of streaming replication, but we never
promised that to be compatible across versions, anyway.
Rename replication_timeout to wal_sender_timeout, and add a new setting
called wal_receiver_timeout that does the same at the walreceiver side.
There was previously no timeout in walreceiver, so if the network went down,
for example, the walreceiver could take a long time to notice that the
connection was lost. Now with the two settings, both sides of a replication
connection will detect a broken connection similarly.
It is no longer necessary to manually set wal_receiver_status_interval to
a value smaller than the timeout. Both wal sender and receiver now
automatically send a "ping" message if more than 1/2 of the configured
timeout has elapsed, and it hasn't received any messages from the other end.
Amit Kapila, heavily edited by me.
mdinit() was misusing IsBootstrapProcessingMode() to decide whether to
create an fsync pending-operations table in the current process. This led
to creating a table not only in the startup and checkpointer processes as
intended, but also in the bgwriter process, not to mention other auxiliary
processes such as walwriter and walreceiver. Creation of the table in the
bgwriter is fatal, because it absorbs fsync requests that should have gone
to the checkpointer; instead they just sit in bgwriter local memory and are
never acted on. So writes performed by the bgwriter were not being fsync'd
which could result in data loss after an OS crash. I think there is no
live bug with respect to walwriter and walreceiver because those never
perform any writes of shared buffers; but the potential is there for
future breakage in those processes too.
To fix, make AuxiliaryProcessMain() export the current process's
AuxProcType as a global variable, and then make mdinit() test directly for
the types of aux process that should have a pendingOpsTable. Having done
that, we might as well also get rid of the random bool flags such as
am_walreceiver that some of the aux processes had grown. (Note that we
could not have fixed the bug by examining those variables in mdinit(),
because it's called from BaseInit() which is run by AuxiliaryProcessMain()
before entering any of the process-type-specific code.)
Back-patch to 9.2, where the problem was introduced by the split-up of
bgwriter and checkpointer processes. The bogus pendingOpsTable exists
in walwriter and walreceiver processes in earlier branches, but absent
any evidence that it causes actual problems there, I'll leave the older
branches alone.
This was causing a compiler warning with Solaris compiler. Use 0 instead.
The variable is initialized just for the sake of tidyness and/or debugging,
it's not used for anything before setting it to a real value.
Per report and suggestion from Peter Eisentraut.
This ensures that a standby such as pg_receivexlog will not be selected
as sync standby - which would cause the master to block waiting for
a location that could never happen.
Fujii Masao
This simplifies code that needs to do arithmetic on XLogRecPtrs.
To avoid changing on-disk format of data pages, the LSN on data pages is
still stored in the old format. That should keep pg_upgrade happy. However,
we have XLogRecPtrs embedded in the control file, and in the structs that
are sent over the replication protocol, so this changes breaks compatibility
of pg_basebackup and server. I didn't do anything about this in this patch,
per discussion on -hackers, the right thing to do would to be to change the
replication protocol to be architecture-independent, so that you could use
a newer version of pg_receivexlog, for example, against an older server
version.
The comments claimed that wasting the last segment made it easier to do
calculations with XLogRecPtrs, because you don't have problems representing
last-byte-position-plus-1 that way. In my experience, however, it only made
things more complicated, because the there was two ways to represent the
boundary at the beginning of a logical log file: logid = n+1 and xrecoff = 0,
or as xlogid = n and xrecoff = 4GB - XLOG_SEG_SIZE. Some functions were
picky about which representation was used.
Also, use a 64-bit segment number instead of the log/seg combination, to
point to a certain WAL segment. We assume that all platforms have a working
64-bit integer type nowadays.
This is an incompatible change in WAL format, so bumping WAL version number.
Andres Freund
Michael Paquier
Alvaro Herrera
Thomas Munro
Peter Eisentraut
Bruce Momjian
Robert Haas
Tom Lane
Heikki Linnakangas
Fujii Masao
Simon Riggs
Peter Eisentraut
Tatsuo Ishii
Magnus Hagander