sets for outer joins, in the light of bug #3588 and additional thought and
experimentation. The original methodology was fatally flawed for nests of
more than two outer joins: it got the relationships between adjacent joins
right, but didn't always come to the right conclusions about whether a join
could be interchanged with one two or more levels below it. This was largely
caused by a mistaken idea that we should use the min_lefthand + min_righthand
sets of a sub-join as the minimum left or right input set of an upper join
when we conclude that the sub-join can't commute with the upper one. If
there's a still-lower join that the sub-join *can* commute with, this method
led us to think that that one could commute with the topmost join; which it
can't. Another problem (not directly connected to bug #3588) was that
make_outerjoininfo's processing-order-dependent method for enforcing outer
join identity #3 didn't work right: if we decided that join A could safely
commute with lower join B, we dropped all information about sub-joins under B
that join A could perhaps not safely commute with, because we removed B's
entire min_righthand from A's.
To fix, make an explicit computation of all inner join combinations that occur
below an outer join, and add to that the full syntactic relsets of any lower
outer joins that we determine it can't commute with. This method gives much
more direct enforcement of the outer join rearrangement identities, and it
turns out not to cost a lot of additional bookkeeping.
Thanks to Richard Harris for the bug report and test case.
Oleg Bartunov and Teodor Sigaev, but I did a lot of editorializing,
so anything that's broken is probably my fault.
Documentation is nonexistent as yet, but let's land the patch so we can
get some portability testing done.
row within one query: we were firing check triggers before all the updates
were done, leading to bogus failures. Fix by making the triggers queued by
an RI update go at the end of the outer query's trigger event list, thereby
effectively making the processing "breadth-first". This was indeed how it
worked pre-8.0, so the bug does not occur in the 7.x branches.
Per report from Pavel Stehule.
that cached compiled patterns will still be there when the function is next
called. Clean up looping logic, thereby fixing bug identified by Pavel
Stehule. Share setup code between the two functions, add some comments, and
avoid risky mixing of int and size_t variables. Clean up the documentation a
tad, and accept all the flag characters mentioned in table 9-19 rather than
just a subset.
clauses in which one side or the other references both sides of the join
cannot be removed as redundant, because that expression won't have been
constrained below the join. Per report from Sergey Burladyan.
CVS HEAD does not contain this bug due to EquivalenceClass rewrite, but it
seems wise to include the regression test for it anyway.
named pg_toast_temp_nnn, alongside the pg_temp_nnn schemas used for the temp
tables themselves. This allows low-level code such as the relcache to
recognize that these tables are indeed temporary, which enables various
optimizations such as not WAL-logging changes and using local rather than
shared buffers for access. Aside from obvious performance benefits, this
provides a solution to bug #3483, in which other backends unexpectedly held
open file references to temporary tables. The scheme preserves the property
that TOAST tables are not in any schema that's normally in the search path,
so they don't conflict with user table names.
initdb forced because of changes in system view definitions.
sugar for PL/PgSQL set-returning functions that want to return the result
of evaluating a query; it should also be more efficient than repeated
RETURN NEXT statements. Based on an earlier patch from Pavel Stehule.
a MIN or MAX aggregate call into an indexscan: the initplan is being made at
the current query nesting level and so we shouldn't increment query_level.
Though usually harmless, this mistake could lead to bogus "plan should not
reference subplan's variable" failures on complex queries. Per bug report
from David Sanchez i Gregori.
referencing table does not change the tuple's FK column(s), we don't bother
to check the PK table since the constraint was presumably already valid.
However, the check is still necessary if the tuple was inserted by our own
transaction, since in that case the INSERT trigger will conclude it need not
make the check (since its version of the tuple has been deleted). We got this
right for simple cases, but not when the insert and update are in different
subtransactions of the current top-level transaction; in such cases the FK
check would never be made at all. (Hence, problem dates back to 8.0 when
subtransactions were added --- it's actually the subtransaction version of a
bug fixed in 7.3.5.) Fix, and add regression test cases. Report and fix by
Affan Salman.
name. With this patch, it is always possible for the user to qualify a
plpgsql variable name if needed to avoid ambiguity. While there is much more
work to be done in this area, this simple change removes one unnecessary
incompatibility with Oracle. Per discussion.
ORDER BY <constant> as redundant. One is that this means query_planner()
has to canonicalize pathkeys even when the query jointree is empty;
the canonicalization was always a no-op in such cases before, but no more.
Also, we have to guard against thinking that a set-returning function is
"constant" for this purpose. Add a couple of regression tests for these
evidently under-tested cases. Per report from Greg Stark and subsequent
experimentation.
unwarranted liberties with int8 vs float8 values for these types.
Specifically, be sure to apply either hashint8 or hashfloat8 depending
on HAVE_INT64_TIMESTAMP. Per my gripe of even date.
over a fairly long period of time, rather than being spat out in a burst.
This happens only for background checkpoints carried out by the bgwriter;
other cases, such as a shutdown checkpoint, are still done at full speed.
Remove the "all buffers" scan in the bgwriter, and associated stats
infrastructure, since this seems no longer very useful when the checkpoint
itself is properly throttled.
Original patch by Itagaki Takahiro, reworked by Heikki Linnakangas,
and some minor API editorialization by me.
unreserved according to the grammar. The list of unreserved words has gotten
extensive enough that the unnecessary quoting is becoming a bit of an eyesore.
To do this, add knowledge of the keyword category to keywords.c's table.
(Someday we might be able to generate keywords.c's table and the keyword lists
in gram.y from a common source.) For the moment, lie about WITH's status in
the table so it will still get quoted --- this is because of the expectation
that WITH will become reserved when the SQL recursive-queries patch gets done.
I didn't force initdb because this affects nothing on-disk; but note that a
few regression tests have changed expected output.
an array of strings rather than an array of integers, and allow any simple
constant or identifier to be used in typmods; for example
create table foo (f1 widget(42,'23skidoo',point));
Of course the typmodin function has still got to pack this info into a
non-negative int32 for storage, but it's still a useful improvement in
flexibility, especially considering that you can do nearly anything if you
are willing to keep the info in a side table. We can get away with this
change since we have not yet released a version providing user-definable
typmods. Per discussion.
historically worked in some but not all cases, but as of 8.2 it failed for all
timezone formats. Fix, and add regression test cases to catch future
regressions in this area. Per gripe from Adam Witney.
regression driver into two parts and reusing half of it. Required to
run ECPG tests without a shell on MSVC builds.
Fix ECPG thread tests for MSVC build (incl output files).
Joachim Wieland and Magnus Hagander
Along the way, allow FOR UPDATE in non-WITH-HOLD cursors; there may once
have been a reason to disallow that, but it seems to work now, and it's
really rather necessary if you want to select a row via a cursor and then
update it in a concurrent-safe fashion.
Original patch by Arul Shaji, rather heavily editorialized by Tom Lane.
results due to syncscan patch, when shared_buffers is small enough. Per
buildfarm reports and some local testing with shared_buffers set to the
lowest value considered by initdb.
were accepted by prior Postgres releases. This takes care of the loose end
left by the preceding patch to downgrade implicit casts-to-text. To avoid
breaking desirable behavior for array concatenation, introduce a new
polymorphic pseudo-type "anynonarray" --- the added concatenation operators
are actually text || anynonarray and anynonarray || text.
from the other string-category types; this eliminates a lot of surprising
interpretations that the parser could formerly make when there was no directly
applicable operator.
Create a general mechanism that supports casts to and from the standard string
types (text,varchar,bpchar) for *every* datatype, by invoking the datatype's
I/O functions. These new casts are assignment-only in the to-string direction,
explicit-only in the other, and therefore should create no surprising behavior.
Remove a bunch of thereby-obsoleted datatype-specific casting functions.
The "general mechanism" is a new expression node type CoerceViaIO that can
actually convert between *any* two datatypes if their external text
representations are compatible. This is more general than needed for the
immediate feature, but might be useful in plpgsql or other places in future.
This commit does nothing about the issue that applying the concatenation
operator || to non-text types will now fail, often with strange error messages
due to misinterpreting the operator as array concatenation. Since it often
(not always) worked before, we should either make it succeed or at least give
a more user-friendly error; but details are still under debate.
Peter Eisentraut and Tom Lane
type. Also, add explicit casts between boolean and text/varchar. Both
of these changes are for conformance with SQL:2003.
Update the regression tests, bump the catversion.
"microsecond" and "millisecond" units were not considered valid input
by themselves, which caused inputs like "1 millisecond" to be rejected
erroneously.
Update the docs, add regression tests, and backport to 8.2 and 8.1
inheritance child of an UPDATE/DELETE target relation can be excluded by
constraints. I had rearranged some code in set_append_rel_pathlist() to
avoid "useless" work when a child is excluded, but overdid it and left
the child with no cheapest_path entry, causing possible failure later
if the appendrel was involved in a join. Also, it seems that the dummy
plan generated by inheritance_planner() when all branches are excluded
has to be a bit less dummy now than was required in 8.2.
Per report from Jan Wieck. Add his test case to the regression tests.
in cases where a sub-SELECT inserts a WHERE clause between two outer joins,
that clause may prevent us from re-ordering the two outer joins. The code
was considering only the joins' own ON-conditions in determining reordering
safety, which is not good enough. Add a "delay_upper_joins" flag to
OuterJoinInfo to flag that we have detected such a clause and higher-level
outer joins shouldn't be permitted to commute with this one. (This might
seem overly coarse, but given the current rules for OJ reordering, it's
sufficient AFAICT.)
The failure case is actually pretty narrow: it needs a WHERE clause within
the RHS of a left join that checks the RHS of a lower left join, but is not
strict for that RHS (else we'd have simplified the lower join to a plain
join). Even then no failure will be manifest unless the planner chooses to
rearrange the join order.
Per bug report from Adam Terrey.
- Function renamed to "xpath".
- Function is now strict, per discussion.
- Return empty array in case when XPath expression detects nothing
(previously, NULL was returned in such case), per discussion.
- (bugfix) Work with fragments with prologue: select xpath('/a',
'<?xml version="1.0"?><a /><b />'); // now XML datum is always wrapped
with dummy <x>...</x>, XML prologue simply goes away (if any).
- Some cleanup.
Nikolay Samokhvalov
Some code cleanup and documentation work by myself.
recompute the limit/offset immediately, so that the updated values are
available when the child's ReScan function is invoked. Add a regression
test for this, too. Bug is new in HEAD (due to the bounded-sorting patch)
so no need for back-patch.
I did not do anything about merging this signaling with chgParam processing,
but if we were to do that we'd still need to compute the updated values
at this point rather than during the first ProcNode call.
Per observation and test case from Greg Stark, though I didn't use his patch.
named foo, would work but the other ordering would not. If a user-specified
type or table name collides with an existing auto-generated array name, just
rename the array type out of the way by prepending more underscores. This
should not create any backward-compatibility issues, since the cases in which
this will happen would have failed outright in prior releases.
Also fix an oversight in the arrays-of-composites patch: ALTER TABLE RENAME
renamed the table's rowtype but not its array type.
needs to check the new constraint against columns of derived domains too.
Also, make it error out if the domain to be modified is used within any
composite-type columns. Eventually we should support that case, but it seems
a bit painful, and not suitable for a back-patch. For the moment just let the
user know we can't do it.
Backpatch to 8.2, which is the only released version that allows nested
domains. Possibly the other part should be back-patched further.
and views (but not system catalogs, nor sequences or toast tables). Get rid
of the hardwired convention that a type's array type is named exactly "_type",
instead using a new column pg_type.typarray to provide the linkage. (It still
will be named "_type", though, except in odd corner cases such as
maximum-length type names.)
Along the way, make tracking of owner and schema dependencies for types more
uniform: a type directly created by the user has these dependencies, while a
table rowtype or auto-generated array type does not have them, but depends on
its parent object instead.
David Fetter, Andrew Dunstan, Tom Lane
wrong thing when inlining polymorphic SQL functions, because it was using the
function's declared return type where it should have used the actual result
type of the current call. In 8.1 and 8.2 this causes obvious failures even if
you don't have assertions turned on; in 8.0 and 7.4 it would only be a problem
if the inlined expression were used as an input to a function that did
run-time type determination on its inputs. Add a regression test, since this
is evidently an under-tested area.
messages to the stats collector. This avoids the problem that enabling
stats_row_level for autovacuum has a significant overhead for short
read-only transactions, as noted by Arjen van der Meijden. We can avoid
an extra gettimeofday call by piggybacking on the one done for WAL-logging
xact commit or abort (although that doesn't help read-only transactions,
since they don't WAL-log anything).
In my proposal for this, I noted that we could change the WAL log entries
for commit/abort to record full TimestampTz precision, instead of only
time_t as at present. That's not done in this patch, but will be committed
separately.
RESET SESSION, RESET PLANS, and RESET TEMP are now DISCARD ALL,
DISCARD PLANS, and DISCARD TEMP, respectively. This is to avoid
confusion with the pre-existing RESET variants: the DISCARD
commands are not actually similar to RESET. Patch from Marko
Kreen, with some minor editorialization.
This is needed to allow a security-definer function to set a truly secure
value of search_path. Without it, a malicious user can use temporary objects
to execute code with the privileges of the security-definer function. Even
pushing the temp schema to the back of the search path is not quite good
enough, because a function or operator at the back of the path might still
capture control from one nearer the front due to having a more exact datatype
match. Hence, disable searching the temp schema altogether for functions and
operators.
Security: CVE-2007-2138
reviewed by Neil Conway. This patch adds the following DDL command
variants: RESET SESSION, RESET TEMP, RESET PLANS, CLOSE ALL, and
DEALLOCATE ALL. RESET SESSION is intended for use by connection
pool software and the like, in order to reset a client session
to something close to its initial state.
Note that while most of these command variants can be executed
inside a transaction block (but are not transaction-aware!),
RESET SESSION cannot. While this is inconsistent, it is intended
to catch programmer mistakes: RESET SESSION in an open transaction
block is probably unintended.
This commit breaks any code that assumes that the mere act of forming a tuple
(without writing it to disk) does not "toast" any fields. While all available
regression tests pass, I'm not totally sure that we've fixed every nook and
cranny, especially in contrib.
Greg Stark with some help from Tom Lane
search_path that was active when the plan was first made. To do this,
improve namespace.c to support a stack of "override" search path settings
(we must have a stack since nested replan events are entirely possible).
This facility replaces the "special namespace" hack formerly used by
CREATE SCHEMA, and should be able to support per-function search path
settings as well.
First, genericcostestimate() was being way too liberal about including
partial-index conditions in its selectivity estimate, resulting in
substantial underestimates for situations such as an indexqual "x = 42"
used with an index on x "WHERE x >= 40 AND x < 50". While the code is
intentionally set up to favor selecting partial indexes when available,
this was too much...
Second, choose_bitmap_and() was likewise easily fooled by cases of this
type, since it would similarly think that the partial index had selectivity
independent of the indexqual.
Fixed by using predicate_implied_by() rather than simple equality checks
to determine redundancy. This is a good deal more expensive but I don't
see much alternative. At least the extra cost is only paid when there's
actually a partial index under consideration.
Per report from Jeff Davis. I'm not going to risk back-patching this,
though.
and regexp_split_to_table. These functions provide access to the
capture groups resulting from a POSIX regular expression match,
and provide the ability to split a string on a POSIX regular
expression, respectively. Patch from Jeremy Drake; code review by
Neil Conway, additional comments and suggestions from Tom and
Peter E.
This patch bumps the catversion, adds some regression tests,
and updates the docs.
test in parallel with the rules test at all, because the former wants to
create a couple of temp views, which can sometimes show up in the latter's
output. Let's try it in the next parallel group instead.
was expecting there to be no regular table named 'foo', but it turns out
the rules test transiently creates one, so that plancache would sometimes
fail. I couldn't reproduce that in quite a few tries here, but several
buildfarm machines have shown the failure. Fix by renaming plancache's
temp table to something nonconflicting.
uses SPI plans, this finally fixes the ancient gotcha that you can't
drop and recreate a temp table used by a plpgsql function.
Along the way, clean up SPI's API a little bit by declaring SPI plan
pointers as "SPIPlanPtr" instead of "void *". This is cosmetic but
helps to forestall simple programming mistakes. (I have changed some
but not all of the callers to match; there are still some "void *"'s
in contrib and the PL's. This is intentional so that we can see if
anyone's compiler complains about it.)
for input/ and output/ directories, because with the addition of
largeobject_1.source, they're not the same list. Apparently the current
buildfarm process does not exercise whether 'make distclean' leaves a
clean tree behind, else the farm would have been failing for awhile.
module and teach PREPARE and protocol-level prepared statements to use it.
In service of this, rearrange utility-statement processing so that parse
analysis does not assume table schemas can't change before execution for
utility statements (necessary because we don't attempt to re-acquire locks
for utility statements when reusing a stored plan). This requires some
refactoring of the ProcessUtility API, but it ends up cleaner anyway,
for instance we can get rid of the QueryContext global.
Still to do: fix up SPI and related code to use the plan cache; I'm tempted to
try to make SQL functions use it too. Also, there are at least some aspects
of system state that we want to ensure remain the same during a replan as in
the original processing; search_path certainly ought to behave that way for
instance, and perhaps there are others.
to_timestamp():
- ID for day-of-week
- IDDD for day-of-year
This makes it possible to convert ISO week dates to and from text
fully represented in either week ('IYYY-IW-ID') or day-of-year
('IYYY-IDDD') format.
I have also added an 'isoyear' field for use with extract / date_part.
Brendan Jurd
considered when it is necessary to do so because of a join-order restriction
(that is, an outer-join or IN-subselect construct). The former coding was a
bit ad-hoc and inconsistent, and it missed some cases, as exposed by Mario
Weilguni's recent bug report. His specific problem was that an IN could be
turned into a "clauseless" join due to constant-propagation removing the IN's
joinclause, and if the IN's subselect involved more than one relation and
there was more than one such IN linking to the same upper relation, then the
only valid join orders involve "bushy" plans but we would fail to consider the
specific paths needed to get there. (See the example case added to the join
regression test.) On examining the code I wonder if there weren't some other
problem cases too; in particular it seems that GEQO was defending against a
different set of corner cases than the main planner was. There was also an
efficiency problem, in that when we did realize we needed a clauseless join
because of an IN, we'd consider clauseless joins against every other relation
whether this was sensible or not. It seems a better design is to use the
outer-join and in-clause lists as a backup heuristic, just as the rule of
joining only where there are joinclauses is a heuristic: we'll join two
relations if they have a usable joinclause *or* this might be necessary to
satisfy an outer-join or IN-clause join order restriction. I refactored the
code to have just one place considering this instead of three, and made sure
that it covered all the cases that any of them had been considering.
Backpatch as far as 8.1 (which has only the IN-clause form of the disease).
By rights 8.0 and 7.4 should have the bug too, but they accidentally fail
to fail, because the joininfo structure used in those releases preserves some
memory of there having once been a joinclause between the inner and outer
sides of an IN, and so it leads the code in the right direction anyway.
I'll be conservative and not touch them.
equality checks it applies, instead of a random dependence on whatever
operators might be named "=". The equality operators will now be selected
from the opfamily of the unique index that the FK constraint depends on to
enforce uniqueness of the referenced columns; therefore they are certain to be
consistent with that index's notion of equality. Among other things this
should fix the problem noted awhile back that pg_dump may fail for foreign-key
constraints on user-defined types when the required operators aren't in the
search path. This also means that the former warning condition about "foreign
key constraint will require costly sequential scans" is gone: if the
comparison condition isn't indexable then we'll reject the constraint
entirely. All per past discussions.
Along the way, make the RI triggers look into pg_constraint for their
information, instead of using pg_trigger.tgargs; and get rid of the always
error-prone fixed-size string buffers in ri_triggers.c in favor of building up
the RI queries in StringInfo buffers.
initdb forced due to columns added to pg_constraint and pg_trigger.
currently have any better strategy for this query than re-running the
sub-select over and over; it seems unlikely that doing so 10000 times
is a more useful test than doing it a few dozen times.
keeping private state in each backend that has inserted and deleted the same
tuple during its current top-level transaction. This is sufficient since
there is no need to be able to determine the cmin/cmax from any other
transaction. This gets us back down to 23-byte headers, removing a penalty
paid in 8.0 to support subtransactions. Patch by Heikki Linnakangas, with
minor revisions by moi, following a design hashed out awhile back on the
pghackers list.
For win32 in general, this makes it possible to run the regression tests
as an admin user by using the same restricted token method that's used
by pg_ctl and initdb.
For vc++, it adds building of pg_regress.exe, adds a resultmap, and
fixes how it runs the install.
Magnus Hagander
already collected in the current transaction; this allows plpgsql functions to
watch for stats updates even though they are confined to a single transaction.
Use this instead of the previous kluge involving pg_stat_file() to wait for
the stats collector to update in the stats regression test. Internally,
decouple storage of stats snapshots from transaction boundaries; they'll
now stick around until someone calls pgstat_clear_snapshot --- which xact.c
still does at transaction end, to maintain the previous behavior. This makes
the logic a lot cleaner, at the price of a couple dozen cycles per transaction
exit.
changes (with an upper limit of 30 seconds), and record the delay time in
the postmaster log. This should give us some info about what's happening
with the intermittent stats failures in buildfarm. After an idea of
Andrew Dunstan's.
that aren't turned into true joins). Since this is the last missing bit of
infrastructure, go ahead and fill out the hash integer_ops and float_ops
opfamilies with cross-type operators. The operator family project is now
DONE ... er, except for documentation ...
observe the xmloption.
Reorganize the representation of the XML option in the parse tree and the
API to make it easier to manage and understand.
Add regression tests for parsing back XML expressions.
Standard English uses "may", "can", and "might" in different ways:
may - permission, "You may borrow my rake."
can - ability, "I can lift that log."
might - possibility, "It might rain today."
Unfortunately, in conversational English, their use is often mixed, as
in, "You may use this variable to do X", when in fact, "can" is a better
choice. Similarly, "It may crash" is better stated, "It might crash".
nonportable "hh" sprintf(3) length modifier. Instead, do the parsing
and output by hand. The code to do this isn't ideal, but this is
an interim measure anyway: the uuid type should probably use the
in-memory struct layout specified by RFC 4122. For now, this patch
should hopefully rectify the buildfarm failures for the uuid test.
Along the way, re-add pg_cast entries for uuid <-> varchar, which
I mistakenly removed earlier, and bump the catversion.
that defined in RFC 4122. This patch includes the basic implementation,
plus regression tests. Documentation and perhaps some additional
functionality will come later. Catversion bumped.
Patch from Gevik Babakhani; review from Peter, Tom, and myself.
activity quiesce. Possibly this will fix the large increase in
non-reproducible stats test failures we've noted since turning on
stats_row_level by default.
- Add new SQL command SET XML OPTION (also available via regular GUC) to
control the DOCUMENT vs. CONTENT option in implicit parsing and
serialization operations.
- Subtle corrections in the handling of the standalone property in
xmlroot().
- Allow xmlroot() to work on content fragments.
- Subtle corrections in the handling of the version property in
xmlconcat().
- Code refactoring for producing XML declarations.
columns procost and prorows, to allow simple user adjustment of the estimated
cost of a function call, as well as control of the estimated number of rows
returned by a set-returning function. We might eventually wish to extend this
to allow function-specific estimation routines, but there seems to be
consensus that we should try a simple constant estimate first. In particular
this provides a relatively simple way to control the order in which different
WHERE clauses are applied in a plan node, which is a Good Thing in view of the
fact that the recent EquivalenceClass planner rewrite made that much less
predictable than before.
the generated files, to help Visual C++ to run these tests. The tests still
pass in VPATH and normal builds.
Patch from Magnus Hagander, editorialized by me.
The implementation is somewhat ugly logic-wise, but I don't see an
easy way to make it more concise.
When writing this, I noticed that my previous implementation of
width_bucket() doesn't handle NaN correctly:
postgres=# select width_bucket('NaN', 1, 5, 5);
width_bucket
--------------
6
(1 row)
AFAICS SQL:2003 does not define a NaN value, so it doesn't address how
width_bucket() should behave here. The patch changes width_bucket() so
that ereport(ERROR) is raised if NaN is specified for the operand or the
lower or upper bounds to width_bucket(). For float8, NaN is disallowed
for any of the floating-point inputs, and +/- infinity is disallowed
for the histogram bounds (but allowed for the operand).
Update docs and regression tests, bump the catversion.
standard convention the 21st century runs from 2001-2100, not 2000-2099,
so make it work like that. Per bug #2885 from Akio Iwaasa.
Backpatch to 8.2, but no further, since this is really a definitional
change; users of older branches are probably more interested in stability.
per-column options for btree indexes. The planner's support for this is still
pretty rudimentary; it does not yet know how to plan mergejoins with
nondefault ordering options. The documentation is pretty rudimentary, too.
I'll work on improving that stuff later.
Note incompatible change from prior behavior: ORDER BY ... USING will now be
rejected if the operator is not a less-than or greater-than member of some
btree opclass. This prevents less-than-sane behavior if an operator that
doesn't actually define a proper sort ordering is selected.
sets the items, and serializes the value back (rather than adding an
arbitrary number of XML preambles as before).
The libxml memory management via palloc had to be disabled because it
crashes when libxml tries to access memory that was helpfully freed
earlier by PostgreSQL. This needs further thought.
The purpose is to allow autovacuum-esq conditional vacuuming and
clustering using SQL to discover the required stats.
No documentation updates required. Catalog version updated.
Glen Parker
valid result from a computation if one of the input values was infinity.
The previous code assumed an operation that returned infinity was an
overflow.
Handle underflow/overflow consistently, and add checks for aggregate
overflow.
Consistently prevent Inf/Nan from being cast to integer data types.
Fix INT_MIN % -1 to prevent overflow.
Update regression results for new error text.
Per report from Roman Kononov.
the XmlExpr code in various lists, use a representation that has some hope
of reverse-listing correctly (though it's still a de-escaping function
shy of correctness), generally try to make it look more like Postgres
coding conventions.
cases. Operator classes now exist within "operator families". While most
families are equivalent to a single class, related classes can be grouped
into one family to represent the fact that they are semantically compatible.
Cross-type operators are now naturally adjunct parts of a family, without
having to wedge them into a particular opclass as we had done originally.
This commit restructures the catalogs and cleans up enough of the fallout so
that everything still works at least as well as before, but most of the work
needed to actually improve the planner's behavior will come later. Also,
there are not yet CREATE/DROP/ALTER OPERATOR FAMILY commands; the only way
to create a new family right now is to allow CREATE OPERATOR CLASS to make
one by default. I owe some more documentation work, too. But that can all
be done in smaller pieces once this infrastructure is in place.
operator strategy numbers, ie, GiST and GIN. This is almost cosmetic
enough to not need a catversion bump, but since the opr_sanity regression
test has to change in sync with the catalog entry, I figured I'd better
do one.
identify long-running transactions. Since we already need to record
the transaction-start time (e.g. for now()), we don't need any
additional system calls to report this information.
Catversion bumped, initdb required.
vacuum/analyze timestamp columns at the end, rather than at a random
spot in the middle as in the original patch. This was deemed more usable
as well as less likely to break existing application code. initdb forced
accordingly. In passing, remove former kluge for initializing
pg_stat_file()'s pg_proc entry --- bootstrap mode was fixed recently
so that this can be done without any hacks, but I overlooked this usage.
input routines. Remove the former "DecodePosixTimezone" function in favor of
letting the zic code handle POSIX-style zone specs (see tzparse()). In
particular this means that "PST+3" now means the same as "-03", whereas it
used to mean "-11" --- the zone abbreviation is effectively just a noise word
in this syntax. Make sure that all named and POSIX-style zone names will be
parsed as a single token. Fix long-standing bogosities in printing and input
of fractional-hour timezone offsets (since the tzparse() code will accept
these, we'd better make 'em work). Also correct an error in the original
coding of the zic-zone-name patch: in "timestamp without time zone" input,
zone names are supposed to be allowed but ignored, but the coding was such
that the zone changed the interpretation anyway.
I introduced in 7.4.1 :-(. It's correct to allow unknown to be coerced to
ANY or ANYELEMENT, since it's a real-enough data type, but it most certainly
isn't an array datatype. This can cause a backend crash but AFAICT is not
exploitable as a security hole. Per report from Michael Fuhr.
Note: as fixed in HEAD, this changes a constant in the pg_stats view,
resulting in a change in the expected regression outputs. The back-branch
patches have been hacked to avoid that, so that pre-existing installations
won't start failing their regression tests.
present; intervening positions are filled with nulls. This behavior
is required by SQL99 but was not implementable before 8.2 due to lack
of support for nulls in arrays. I have only made it work for the
one-dimensional case, which is all that SQL99 requires. It seems quite
complex to get it right in higher dimensions, and since we never allowed
extension at all in higher dimensions, I think that must count as a
future feature addition not a bug fix.
'postmaster', so as not to depend on the existence of the postmaster
symlink. Also, implement postmaster-still-alive and postmaster-kill
operations for Windows, per Magnus.
and create a new view pg_timezone_names that provides information about
the zones known in the 'zic' database. Magnus Hagander, with some
additional work by Tom Lane.
agreed these symbols are less easily confused. I made new pg_operator
entries (with new OIDs) for the old names, so as to provide backward
compatibility while making it pretty easy to remove the old names in
some future release cycle. This commit only touches the core datatypes,
contrib will be fixed separately.
can create or modify rules for the table. Do setRuleCheckAsUser() while
loading rules into the relcache, rather than when defining a rule. This
ensures that permission checks for tables referenced in a rule are done with
respect to the current owner of the rule's table, whereas formerly ALTER TABLE
OWNER would fail to update the permission checking for associated rules.
Removal of separate RULE privilege is needed to prevent various scenarios
in which a grantee of RULE privilege could effectively have any privilege
of the table owner. For backwards compatibility, GRANT/REVOKE RULE is still
accepted, but it doesn't do anything. Per discussion here:
http://archives.postgresql.org/pgsql-hackers/2006-04/msg01138.php
cascaded first to days and only what is leftover into seconds. This
seems to satisfy the principle of least surprise given the general
conversion to three-part interval values --- it was an oversight that
these cases weren't dealt with in 8.1. Michael Glaesemann
of the syntax as this fundamentally dead-end approach can, in particular
combinations of single and multi column assignments. Improve rather
inadequate documentation and provide some regression tests.
RETURNING play nice with views/rules. To wit, have the rule rewriter
rewrite any RETURNING clause found in a rule to produce what the rule's
triggering query asked for in its RETURNING clause, in particular drop
the RETURNING clause if no RETURNING in the triggering query. This
leaves the responsibility for knowing how to produce the view's output
columns on the rule author, without requiring any fundamental changes
in rule semantics such as adding new rule event types would do. The
initial implementation constrains things to ensure that there is
exactly one, unconditionally invoked RETURNING clause among the rules
for an event --- later we might be able to relax that, but for a post
feature freeze fix it seems better to minimize how much invention we do.
Per gripe from Jaime Casanova.
by abandoning the idea that it should say SERIAL in the dump. Instead,
dump serial sequences and column defaults just like regular ones.
Add a new backend command ALTER SEQUENCE OWNED BY to let pg_dump recreate
the sequence-to-column dependency that was formerly created "behind the
scenes" by SERIAL. This restores SERIAL to being truly "just a macro"
consisting of component operations that can be stated explicitly in SQL.
Furthermore, the new command allows sequence ownership to be reassigned,
so that old mistakes can be cleaned up.
Also, downgrade the OWNED-BY dependency from INTERNAL to AUTO, since there
is no longer any very compelling argument why the sequence couldn't be
dropped while keeping the column. (This forces initdb, to be sure the
right kinds of dependencies are in there.)
Along the way, add checks to prevent ALTER OWNER or SET SCHEMA on an
owned sequence; you can now only do this indirectly by changing the
owning table's owner or schema. This is an oversight in previous
releases, but probably not worth back-patching.
that ps_status provides by appending 'waiting' to the PS display. This
completes the project of making it feasible to turn off process title
updates and instead rely on pg_stat_activity. Per my suggestion a few
weeks ago.
well as vacuum_cost_delay. Since datestyle is a string variable,
this exercises memory allocation issues that might not appear when
modifying an integer GUC variable. Also, we can observe the side
effects of changing datestyle to check that assign hooks are called
at the right times.
nonunique join value, leading to plan-choice-dependent results ... and
it seems some platforms will choose a different plan. Tweak the test
so that it has well-defined results. Per report from Olivier Prenant.
plpgsql support to come later. Along the way, convert execMain's
SELECT INTO support into a DestReceiver, in order to eliminate some ugly
special cases.
Jonah Harris and Tom Lane
without indexes) but not to display temp tables. It's a bit hard to
credit that sanity_check could get through a database-wide VACUUM
while the preceding create_index test is still trying to clean up
its temp tables ... but I see no other explanation for the current
failure report from buildfarm member sponge.
check). This isn't supported by pg_regress since the recent rewrite
into C. While we could add char classes to pg_regress.c's code, it's
not really needed at the moment: thanks to Andrew's patch to make
pg_regress always accept the 'standard' comparison file, we can just
drop the version check.
because they are used for testing the return value from system().
(WIN32 doesn't overlay the return code with other failure conditions
like Unix does, so they are just simple macros.)
Fix regression checks to properly handle diff failures on Win32 using
the new macros.
the float8 versions of the aggregates, which is all that the standard requires.
Sergey's original patch also provided versions using numeric arithmetic,
but given the size and slowness of the code, I doubt we ought to include
those in core.
the opportunity to treat COUNT(*) as a zero-argument aggregate instead
of the old hack that equated it to COUNT(1); this is materially cleaner
(no more weird ANYOID cases) and ought to be at least a tiny bit faster.
Original patch by Sergey Koposov; review, documentation, simple regression
tests, pg_dump and psql support by moi.
configuration files that can be altered by a DBA. The australian_timezones
GUC setting disappears, replaced by a timezone_abbreviations setting (set this
to 'Australia' to get the effect of australian_timezones). The list of zone
names defined by default has undergone a bit of cleanup, too. Documentation
still needs some work --- in particular, should we fix Table B-4, or just get
rid of it? Joachim Wieland, with some editorializing by moi.
pg_regress: there's no other way to cope with testing a relocated
installation. Seems better to call it --psqldir though, since the
only thing we need to find in that case is psql. It'd be better if
we could use find_other_exec, but that's not happening unless we are
willing to install pg_regress alongside psql, which seems unlikely
to happen.
the check on diff's exit status to check for literally 0 or 1. Someone
should look into why WIFEXITED/WEXITSTATUS don't work for this, but I've
spent more than enough time on it already.
just exec instead of creating a subprocess. This reduces process usage
from four processes per parallel test to two. I have no idea whether
a comparable optimization is possible or useful in the Windows port.
This allows it to be used on Windows without installing mingw
(though you do still need 'diff'), and opens the door to future
improvements such as message localization.
Magnus Hagander and Tom Lane.
code to forcibly drop regressuser[1-4] and regressgroup[1-2]. Instead,
let the privileges.sql test do that for itself (this is made easy by
the recent addition of DROP ROLE IF EXISTS). Per a recent patch proposed
by Joachim Wieland --- the rest of his patch is superseded by the
rewrite into C, but this is a good idea we should adopt.
the read lock we hold on the table's parent relation until commit.
Update equalfuncs.c for the new field in AlterTableCmd. Various
improvements to comments, variable names, and error reporting.
There is room for further improvement here, but this is at least
a step in the right direction.
Open items:
There were a few tangentially related issues that have come up that I think
are TODOs. I'm likely to tackle one or two of these next so I'm interested in
hearing feedback on them as well.
. Constraints currently do not know anything about inheritance. Tom suggested
adding a coninhcount and conislocal like attributes have to track their
inheritance status.
. Foreign key constraints currently do not get copied to new children (and
therefore my code doesn't verify them). I don't think it would be hard to
add them and treat them like CHECK constraints.
. No constraints at all are copied to tables defined with LIKE. That makes it
hard to use LIKE to define new partitions. The standard defines LIKE and
specifically says it does not copy constraints. But the standard already has
an option called INCLUDING DEFAULTS; we could always define a non-standard
extension LIKE table INCLUDING CONSTRAINTS that gives the user the option to
request a copy including constraints.
. Personally, I think the whole attislocal thing is bunk. The decision about
whether to drop a column from children tables or not is something that
should be up to the user and trying to DWIM based on whether there was ever
a local definition or the column was acquired purely through inheritance is
hardly ever going to match up with user expectations.
. And of course there's the whole unique and primary key constraint issue. I
think to get any traction at all on this you have a prerequisite of a real
partitioned table implementation where the system knows what the partition
key is so it can recognize when it's a leading part of an index key.
Greg Stark
the order in which it visits tables is not dependent on the physical order
of pg_constraint entries, and neither are the error messages it gives.
This should correct recently-noticed instability in regression tests.
Tom Lane
Bruce Momjian
Andrew Dunstan
Neil Conway
Peter Eisentraut
Alvaro Herrera
Magnus Hagander
Tatsuo Ishii
Teodor Sigaev