One test case was meant to check that pg_basebackup does not succeed
when a slot is specified with -S but WAL streaming is not selected,
which used to require specifying -X stream. Since -X stream is the
default in PostgreSQL 10, this test case no longer covers that meaning,
but the pg_basebackup invocation happened to fail anyway for the
unrelated reason that the specified replication slot does not exist. To
fix, move the test case to later in the file where the slot does exist,
and add -X none to the invocation so that it covers the originally meant
behavior.
extracted from a patch by Michael Banck <michael.banck@credativ.de>
For performance reasons a larger segment size than the default 16MB
can be useful. A larger segment size has two main benefits: Firstly,
in setups using archiving, it makes it easier to write scripts that
can keep up with higher amounts of WAL, secondly, the WAL has to be
written and synced to disk less frequently.
But at the same time large segment size are disadvantageous for
smaller databases. So far the segment size had to be configured at
compile time, often making it unrealistic to choose one fitting to a
particularly load. Therefore change it to a initdb time setting.
This includes a breaking changes to the xlogreader.h API, which now
requires the current segment size to be configured. For that and
similar reasons a number of binaries had to be taught how to recognize
the current segment size.
Author: Beena Emerson, editorialized by Andres Freund
Reviewed-By: Andres Freund, David Steele, Kuntal Ghosh, Michael
Paquier, Peter Eisentraut, Robert Hass, Tushar Ahuja
Discussion: https://postgr.es/m/CAOG9ApEAcQ--1ieKbhFzXSQPw_YLmepaa4hNdnY5+ZULpt81Mw@mail.gmail.com
This is primarily useful for making tests of this utility more
deterministic, to avoid the complexity of starting pg_receivewal as a
deamon in TAP tests.
While this is less useful than the equivalent pg_recvlogical option,
users can as well use it for example to enforce WAL streaming up to a
end-of-backup position, to save only a minimal amount of WAL.
Use this new option to stream WAL data in a deterministic way within a
new set of TAP tests.
Author: Michael Paquier <michael.paquier@gmail.com>
Some informational messages showed up even if verbose mode was not
used. Move them to verbose mode.
Author: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
In the frontend Makefiles that pull in libpgfeutils, we'd generally
done it like this:
LDFLAGS += -L$(top_builddir)/src/fe_utils -lpgfeutils $(libpq_pgport)
That method is badly broken, as seen in bug #14742 from Chris Ruprecht.
The -L flag for src/fe_utils ends up being placed after whatever random
-L flags are in LDFLAGS already. That puts us at risk of pulling in
libpgfeutils.a from some previous installation rather than the freshly
built one in src/fe_utils. Also, the lack of an "override" is hazardous
if someone tries to specify some LDFLAGS on the make command line.
The correct way to do it is like this:
override LDFLAGS := -L$(top_builddir)/src/fe_utils -lpgfeutils $(libpq_pgport) $(LDFLAGS)
so that libpgfeutils, along with libpq, libpgport, and libpgcommon, are
guaranteed to be pulled in from the build tree and not from any referenced
system directory, because their -L flags will appear first.
In some places we'd been even lazier and done it like this:
LDFLAGS += -L$(top_builddir)/src/fe_utils -lpgfeutils -lpq
which is subtly wrong in an additional way: on platforms where we can't
restrict the symbols exported by libpq.so, it allows libpgfeutils to
latch onto libpgport and libpgcommon symbols from libpq.so, rather than
directly from those static libraries as intended. This carries hazards
like those explained in the comments for the libpq_pgport macro.
In addition to fixing the broken libpgfeutils usages, I tried to
standardize on using $(libpq_pgport) like so:
override LDFLAGS := $(libpq_pgport) $(LDFLAGS)
even where libpgfeutils is not in the picture. This makes no difference
right now but will hopefully discourage future mistakes of the same ilk.
And it's more like the way we handle CPPFLAGS in libpq-using Makefiles.
In passing, just for consistency, make pgbench include PTHREAD_LIBS the
same way everyplace else does, ie just after LIBS rather than in some
random place in the command line. This might have practical effect if
there are -L switches in that macro on some platform.
It looks to me like the MSVC build scripts are not affected by this
error, but someone more familiar with them than I might want to double
check.
Back-patch to 9.6 where libpgfeutils was introduced. In 9.6, the hazard
this error creates is that a reinstallation might link to the prior
installation's copy of libpgfeutils.a and thereby fail to absorb a
minor-version bug fix.
Discussion: https://postgr.es/m/20170714125106.9231.13772@wrigleys.postgresql.org
When writing a backup to stdout with pg_basebackup on Windows, put stdout
to binary mode. Any CR bytes in the output will otherwise be output
incorrectly as CR+LF.
In the passing, standardize on using "_setmode" instead of "setmode", for
the sake of consistency. They both do the same thing, but according to
MSDN documentation, setmode is deprecated.
Fixes bug #14634, reported by Henry Boehlert. Patch by Haribabu Kommi.
Backpatch to all supported versions.
Discussion: https://www.postgresql.org/message-id/20170428082818.24366.13134@wrigleys.postgresql.org
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Using the client pid can easily be non-unique when used on different
hosts. Using the backend pid should be guaranteed unique, since the
temporary slot gets removed when the client disconnects so it will be
gone even if the pid is renewed.
Reported by Ludovic Vaugeois-Pepin
Partially revert commit c079673dcb.
There were complaints that splitting switch descriptions would
complicate translation efforts. There are probably ways to resolve
the formatting problem without doing that, but undo it while we're
discussing.
Reformat various places in which pgindent will make a mess, and
fix a few small violations of coding style that I happened to notice
while perusing the diffs from a pgindent dry run.
There is one actual bug fix here: the need-to-enlarge-the-buffer code
path in icu_convert_case was obviously broken. Perhaps it's unreachable
in our usage? Or maybe this is just sadly undertested.
Per discussion, "location" is a rather vague term that could refer to
multiple concepts. "LSN" is an unambiguous term for WAL locations and
should be preferred. Some function names, view column names, and function
output argument names used "lsn" already, but others used "location",
as well as yet other terms such as "wal_position". Since we've already
renamed a lot of things in this area from "xlog" to "wal" for v10,
we may as well incur a bit more compatibility pain and make these names
all consistent.
David Rowley, minor additional docs hacking by me
Discussion: https://postgr.es/m/CAKJS1f8O0njDKe8ePFQ-LK5-EjwThsDws6ohJ-+c6nWK+oUxtg@mail.gmail.com
pg_basebackup's child process did not pay any attention to the pipe
from its parent while waiting for input from the source server.
If no server data was arriving, it would only wake up and check the
pipe every standby_message_timeout or so. This creates a problem
since the parent process might determine and send the desired stop
position only after the server has reached end-of-WAL and stopped
sending data. In the src/test/recovery regression tests, the timing
is repeatably such that it takes nearly 10 seconds for the child
process to realize that it should shut down. It's not clear how
often that would happen in real-world cases, but it sure seems like
a bug --- and if the user turns off standby_message_timeout or sets
it very large, the delay could be a lot worse.
To fix, expand the StreamCtl API to allow the pipe input FD to be
passed down to the low-level wait routine, and watch both sockets
when sleeping.
(Note: AFAICS this issue doesn't affect the Windows port, since
it doesn't rely on a pipe to transfer the stop position to the
child thread.)
Discussion: https://postgr.es/m/6456.1493263884@sss.pgh.pa.us
While at it also update the comments in walmethods.h to make it less
likely for mistakes like this to appear in the future (thanks to Tom for
improvements to the comments).
And finally, in passing change the return type of walmethod.getlasterror
to being const, also per suggestion from Tom.
When reporting progress, make the "waiting for checkpoint" test be
overwritten by the file-based progress once it's completed. This is more
consistent with how we report the rest of the progress.
Suggested by Jeff Janes
Fix all perlcritic warnings of severity level 5, except in
src/backend/utils/Gen_dummy_probes.pl, which is automatically generated.
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
We used to export snapshots unconditionally in CREATE_REPLICATION_SLOT
in the replication protocol, but several upcoming patches want more
control over what happens.
Suppress snapshot export in pg_recvlogical, which neither needs nor can
use the exported snapshot. Since snapshot exporting can fail this
improves reliability.
This also paves the way for allowing the creation of replication slots
on standbys, which cannot export snapshots because they cannot allocate
new XIDs.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
initdb now initializes a pg_hba.conf that allows replication connections
from the local host, same as it does for regular connections. The
connecting user still needs to have the REPLICATION attribute or be a
superuser.
The intent is to allow pg_basebackup from the local host to succeed
without requiring additional configuration.
Michael Paquier <michael.paquier@gmail.com> and me
The syslogger will write out the current stderr and csvlog names, if
it's running and there are any, to a new file in the data directory
called "current_logfiles". We take care to remove this file when it
might no longer be valid (but not at shutdown). The function
pg_current_logfile() can be used to read the entries in the file.
Gilles Darold, reviewed and modified by Karl O. Pinc, Michael
Paquier, and me. Further review by Álvaro Herrera and Christoph Berg.
Output a message about checkpoint starting in verbose mode of
pg_basebackup, and make the documentation state more clearly that this
happens.
Author: Michael Banck
c.h #includes a number of core libc header files, such as <stdio.h>.
There's no point in re-including these after having read postgres.h,
postgres_fe.h, or c.h; so remove code that did so.
While at it, also fix some places that were ignoring our standard pattern
of "include postgres[_fe].h, then system header files, then other Postgres
header files". While there's not any great magic in doing it that way
rather than system headers last, it's silly to have just a few files
deviating from the general pattern. (But I didn't attempt to enforce this
globally, only in files I was touching anyway.)
I'd be the first to say that this is mostly compulsive neatnik-ism,
but over time it might save enough compile cycles to be useful.
Twiddle the replication-related code so that its timestamp variables
are declared TimestampTz, rather than the uninformative "int64" that
was previously used for meant-to-be-always-integer timestamps.
This resolves the int64-vs-TimestampTz declaration inconsistencies
introduced by commit 7c030783a, though in the opposite direction to
what was originally suggested.
This required including datatype/timestamp.h in a couple more places
than before. I decided it would be a good idea to slim down that
header by not having it pull in <float.h> etc, as those headers are
no longer at all relevant to its purpose. Unsurprisingly, a small number
of .c files turn out to have been depending on those inclusions, so add
them back in the .c files as needed.
Discussion: https://postgr.es/m/26788.1487455319@sss.pgh.pa.us
Discussion: https://postgr.es/m/27694.1487456324@sss.pgh.pa.us
The recovery.conf file that's generated is specifically for replication,
and not needed (or wanted) for regular backup restore, so indicate that
in the message.
Commit f82ec32ac3 renamed the pg_xlog
directory to pg_wal. To make things consistent, and because "xlog" is
terrible terminology for either "transaction log" or "write-ahead log"
rename all SQL-callable functions that contain "xlog" in the name to
instead contain "wal". (Note that this may pose an upgrade hazard for
some users.)
Similarly, rename the xlog_position argument of the functions that
create slots to be called wal_position.
Discussion: https://www.postgresql.org/message-id/CA+Tgmob=YmA=H3DbW1YuOXnFVgBheRmyDkWcD9M8f=5bGWYEoQ@mail.gmail.com
Temporary replication slots will be used by default when wal streaming
is used and no slot name is specified with -S. If a slot name is
specified, then a permanent slot with that name is used. If --no-slot is
specified, then no permanent or temporary slot will be used.
Temporary slots are only used on 10.0 and newer, of course.
Allow pg_recvlogical to specify an ending LSN, complementing
the existing -—startpos=LSN option.
Craig Ringer, reviewed by Euler Taveira and Naoki Okano
Since streaming is now supported for all output formats, make this the
default as this is what most people want.
To get the old behavior, the parameter -X none can be specified to turn
it off.
This also removes the parameter -x for fetch, now requiring -X fetch to
be specified to use that.
Reviewed by Vladimir Rusinov, Michael Paquier and Simon Riggs
In 56c7d8d the behavior to keep .partial segments around
(considered corrupt) in case an connection failure occurs was
accidentally removed. This would lead to an incomplete segment
being considered complete.
Author: Michael Paquier
Commit 56c7d8d455 allowed pg_basebackup
to stream WAL in tar mode. But there is the restriction that WAL
streaming in tar mode works only when the value - (dash) is not
specified as output directory. This means that the combination of
three options "-D -", "-F t" and "-X stream" is invalid. However,
previously, even when those options were specified at the same time,
pg_basebackup background process unexpectedly started streaming WAL.
And then it exited with an error.
This commit changes pg_basebackup so that it errors out on such
invalid combination of options at the beginning.
Reviewed by Magnus Hagander, and patch by me.
In each case, absence of a trailing newline would itself constitute a
PostgreSQL bug. Therefore, this slightly enhances the changed tests.
This works around a bug that last appeared in Perl 5.8.8, fixing
src/test/modules/test_pg_dump when run against that version. Commit
e7293e3271 worked around the bug, but the
subsequent addition of test_pg_dump introduced affected code. As that
commit had shown, slight increases in pattern complexity can suppress
the bug. This commit edits qr/foo$/m patterns too complex to encounter
the bug today, for style consistency and robustness against unrelated
pattern changes. Back-patch to 9.6, where test_pg_dump was introduced.
As of this writing, a fresh MSYS installation includes an affected Perl
5.8.8. The Perl 5.8.8 in Red Hat Enterprise Linux 5.11 carries a patch
that renders it unaffected, but the Perl 5.8.5 of Red Hat Enterprise
Linux 4.4 is affected.
Using the name fsync clashed with the #define we have on Windows that
redefines it to _commit. Naming it sync should remove that conflict.
Per all the Windows buildfarm members
This will write the received transaction log into a file called
pg_wal.tar(.gz) next to the other tarfiles instead of writing it to
base.tar. When using fetch mode, the transaction log is still written to
base.tar like before, and when used against a pre-10 server, the file
is named pg_xlog.tar.
To do this, implement a new concept of a "walmethod", which is
responsible for writing the WAL. Two implementations exist, one that
writes to a plain directory (which is also used by pg_receivexlog) and
one that writes to a tar file with optional compression.
Reviewed by Michael Paquier
"xlog" is not a particularly clear abbreviation for "write-ahead log",
and it sometimes confuses users into believe that the contents of the
"pg_xlog" directory are not critical data, leading to unpleasant
consequences. So, rename the directory to "pg_wal".
This patch modifies pg_upgrade and pg_basebackup to understand both
the old and new directory layouts; the former is necessary given the
purpose of the tool, while the latter merely avoids an unnecessary
backward-compatibility break.
We may wish to consider renaming other programs, switches, and
functions which still use the old "xlog" naming to also refer to
"wal". However, that's still under discussion, so let's do just this
much for now.
Discussion: CAB7nPqTeC-8+zux8_-4ZD46V7YPwooeFxgndfsq5Rg8ibLVm1A@mail.gmail.com
Michael Paquier
--noclean and --nosync were the only options spelled without a hyphen,
so change this for consistency with other options. The options in
pg_basebackup have not been in a release, so we just rename them. For
initdb, we retain the old variants.
Vik Fearing and me
Fixes errors introduced in commit bc34223bc, as detected by Coverity.
In passing, report ENOSPC for a short write while padding a new wal file in
open_walfile, make certain that close_walfile closes walfile in all cases,
and improve a couple of comments.
Michael Paquier and Tom Lane
Several places weren't careful about fsyncing in the way. See 1d4a0ab1
and 606e0f98 for details about required fsyncs.
This adds a couple of functions in src/common/ that have an equivalent
in the backend: durable_rename(), fsync_parent_path()
From: Michael Paquier <michael.paquier@gmail.com>
The list of files and directories that pg_basebackup excludes from the
backup was somewhat incomplete and unorganized. Change that with having
the exclusion driven from tables. Clean up some code around it. Also
document the exclusions in more detail so that users of pg_start_backup
can make use of it as well.
The contents of these directories are now excluded from the backup:
pg_dynshmem, pg_notify, pg_serial, pg_snapshots, pg_subtrans
Also fix a bug that a pg_repl_slot or pg_stat_tmp being a symlink would
cause a corrupt tar header to be created. Now such symlinks are
included in the backup as empty directories. Bug found by Ashutosh
Sharma <ashu.coek88@gmail.com>.
From: David Steele <david@pgmasters.net>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
<sys/select.h> is required by POSIX.1-2001 to get the prototype of
select(2), but nearly no systems enforce that because older standards
let you get away with including some other headers. Recent OpenBSD
hacking has removed that frail touch of friendliness, however, which
broke some compiles; fix all the way back to 9.1 by adding the required
standard. Only vacuumdb.c was reported to fail, but it seems easier to
fix the whole lot in a fell swoop.
Per bug #14334 by Sean Farrell.
Like initdb, clean up created data and xlog directories, unless the new
-n/--noclean option is specified.
Tablespace directories are not cleaned up, but a message is written
about that.
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
The previous API for this function had it returning a malloc'd string.
That meant that callers had to check for NULL return, which few of them
were doing, and it also meant that callers had to remember to free()
the string later, which required extra logic in most cases.
Instead, make simple_prompt() write into a buffer supplied by the caller.
Anywhere that the maximum required input length is reasonably small,
which is almost all of the callers, we can just use a local or static
array as the buffer instead of dealing with malloc/free.
A fair number of callers used "pointer == NULL" as a proxy for "haven't
requested the password yet". Maintaining the same behavior requires
adding a separate boolean flag for that, which adds back some of the
complexity we save by removing free()s. Nonetheless, this nets out
at a small reduction in overall code size, and considerably less code
than we would have had if we'd added the missing NULL-return checks
everywhere they were needed.
In passing, clean up the API comment for simple_prompt() and get rid
of a very-unnecessary malloc/free in its Windows code path.
This is nominally a bug fix, but it does not seem worth back-patching,
because the actual risk of an OOM failure in any of these places seems
pretty tiny, and all of them are client-side not server-side anyway.
This patch is by me, but it owes a great deal to Michael Paquier
who identified the problem and drafted a patch for fixing it the
other way.
Discussion: <CAB7nPqRu07Ot6iht9i9KRfYLpDaF2ZuUv5y_+72uP23ZAGysRg@mail.gmail.com>
It is redundant with appendConnStrVal(), which became an extern function
in commit 41f18f021a. This changes the
handling of out-of-memory and of certain inputs for which quoting is
optional, but pg_basebackup has no need for unusual treatment thereof.
Due to simplistic quoting and confusion of database names with conninfo
strings, roles with the CREATEDB or CREATEROLE option could escalate to
superuser privileges when a superuser next ran certain maintenance
commands. The new coding rule for PQconnectdbParams() calls, documented
at conninfo_array_parse(), is to pass expand_dbname=true and wrap
literal database names in a trivial connection string. Escape
zero-length values in appendConnStrVal(). Back-patch to 9.1 (all
supported versions).
Nathan Bossart, Michael Paquier, and Noah Misch. Reviewed by Peter
Eisentraut. Reported by Nathan Bossart.
Security: CVE-2016-5424
The help message for pg_basebackup specifies that the numbers 0 through 9
are accepted as valid values of -Z option. But, previously -Z 0 was rejected
as an invalid compression level.
Per discussion, it's better to make pg_basebackup treat 0 as valid
compression level meaning no compression, like pg_dump.
Back-patch to all supported versions.
Reported-By: Jeff Janes
Reviewed-By: Amit Kapila
Discussion: CAMkU=1x+GwjSayc57v6w87ij6iRGFWt=hVfM0B64b1_bPVKRqg@mail.gmail.com
Adjust the way we detect the locale. As a result the minumum Windows
version supported by VS2015 and later is Windows Vista. Add some tweaks
to remove new compiler warnings. Remove documentation references to the
now obsolete msysGit.
Michael Paquier, somewhat edited by me, reviewed by Christian Ullrich.
Backpatch to 9.5
The distinction between "archive" and "hot_standby" existed only because
at the time "hot_standby" was added, there was some uncertainty about
stability. This is now a long time ago. We would like to move forward
with simplifying the replication configuration, but this distinction is
in the way, because a primary server cannot tell (without asking a
standby or predicting the future) which one of these would be the
appropriate level.
Pick a new name for the combined setting to make it clearer that it
covers all (non-logical) backup and replication uses. The old values
are still accepted but are converted internally.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: David Steele <david@pgmasters.net>
Much cruft had accumulated over time with a large number of parameters
passed down between functions very deep. With this refactoring, instead
introduce a StreamCtl structure that holds the parameters, and pass around
a pointer to this structure instead. This makes it much easier to add or
remove fields that are needed deeper down in the implementation without
having to modify every function header in the file.
Patch by me after much nagging from Andres
Reviewed by Craig Ringer and Daniel Gustafsson
This makes the psql() method much more capable: it captures both stdout
and stderr; it now returns the psql exit code rather than stdout; a
timeout can now be specified, as can ON_ERROR_STOP behavior; it gained a
new "on_error_die" (defaulting to off) parameter to raise an exception
if there's any problem. Finally, additional parameters to psql can be
passed if there's need for further tweaking.
For convenience, a new safe_psql() method retains much of the old
behavior of psql(), except that it uses on_error_die on, so that
problems like syntax errors in SQL commands can be detected more easily.
Many existing TAP test files now use safe_psql, which is what is really
wanted. A couple of ->psql() calls are now added in the commit_ts
tests, which verify that the right thing is happening on certain errors.
Some ->command_fails() calls in recovery tests that were verifying that
psql failed also became ->psql() calls now.
Author: Craig Ringer. Some tweaks by Álvaro Herrera
Reviewed-By: Michaël Paquier
A pointless and confusing error message is shown to the user when
attempting to identify a 9.3 or older remote server with a 9.5/9.6
pg_receivexlog, because the return signature of IDENTIFY_SYSTEM was
changed in 9.4. There's no good reason for the warning message, so
shuffle code around to keep it quiet.
(pg_recvlogical is also affected by this commit, but since it obviously
cannot work with 9.3 that doesn't actually matter much.)
Backpatch to 9.5.
Reported by Marco Nenciarini, who also wrote the initial patch. Further
tweaked by Robert Haas and Fujii Masao; reviewed by Michael Paquier and
Craig Ringer.
Peter Eisentraut
Andres Freund
Tom Lane
Heikki Linnakangas
Alvaro Herrera
Magnus Hagander
Robert Haas
Bruce Momjian
Fujii Masao
Simon Riggs
Noah Misch
Andrew Dunstan