An invalid index is skipped when doing REINDEX CONCURRENTLY at table
level, with INDEX_CORRUPTED used as errcode. This is confusing,
because an invalid index could exist after an interruption. The errcode
is switched to OBJECT_NOT_IN_PREREQUISITE_STATE instead, as per a
suggestion from Andres Freund.
While on it, the error messages are reworded, and a hint is added,
telling how to rebuild an invalid index in this case. This has been
suggested by Noah Misch.
Discussion: https://postgr.es/m/20231118230958.4fm3fhk4ypshxopa@awork3.anarazel.de
A REINDEX CONCURRENTLY run on a table with no indexes would always pop
the topmost snapshot from the active snapshot stack, making the snapshot
handling inconsistent between the multiple-relation and single-relation
cases. This commit slightly changes the snapshot stack handling so as a
snapshot is popped only ReindexMultipleInternal() in this case after a
relation has been reindexed, fixing a problem where an event trigger
function may need a snapshot but does not have one. This also keeps the
places where PopActiveSnapshot() is called closer to each other.
While on it, this expands the existing tests to cover all the cases that
could be faced with REINDEX commands and such event triggers, for one or
more relations, with or without indexes.
This behavior is inconsistent since 5dc92b844e, but we've never had a
need for an active snapshot at the end of a REINDEX until now.
Thanks also to Jian He for the input.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/cb538743-484c-eb6a-a8c5-359980cd3a17@gmail.com
This commit adds support for REINDEX in event triggers, making this
command react for the events ddl_command_start and ddl_command_end. The
indexes rebuilt are collected with the ReindexStmt emitted by the
caller, for the concurrent and non-concurrent paths.
Thanks to that, it is possible to know a full list of the indexes that a
single REINDEX command has worked on.
Author: Garrett Thornburg, Jian He
Reviewed-by: Jim Jones, Michael Paquier
Discussion: https://postgr.es/m/CAEEqfk5bm32G7sbhzHbES9WejD8O8DCEOaLkxoBP7HNWxjPpvg@mail.gmail.com
Commit 861f86beea changed hash_xlog_squeeze_page() to start reading
the write buffer conditionally but forgot to initialize it leading to an
uninitialized access.
Reported-by: Alexander Lakhin
Author: Hayato Kuroda
Reviewed-by: Alexander Lakhin, Amit Kapila
Discussion: http://postgr.es/m/62ed1a9f-746a-8e86-904b-51b9b806a1d9@gmail.com
The test module includes helper functions to quickly burn through lots
of XIDs. They are used in the tests, and are also handy for manually
testing XID wraparound.
Since these tests are very expensive the entire suite is disabled by
default. It requires to set PG_TEST_EXTRA to run it.
Reviewed-by: Daniel Gustafsson, John Naylor, Michael Paquier
Reviewed-by: vignesh C
Author: Heikki Linnakangas, Masahiko Sawada, Andres Freund
Discussion: https://www.postgresql.org/message-id/CAD21AoDVhkXp8HjpFO-gp3TgL6tCKcZQNxn04m01VAtcSi-5sA%40mail.gmail.com
Quotes are applied to GUCs in a very inconsistent way across the code
base, with a mix of double quotes or no quotes used. This commit
removes double quotes around all the GUC names that are obviously
referred to as parameters with non-English words (use of underscore,
mixed case, etc).
This is the result of a discussion with Álvaro Herrera, Nathan Bossart,
Laurenz Albe, Peter Eisentraut, Tom Lane and Daniel Gustafsson.
Author: Peter Smith
Discussion: https://postgr.es/m/CAHut+Pv-kSN8SkxSdoHano_wPubqcg5789ejhCDZAcLFceBR-w@mail.gmail.com
Previously, a background psql session uses the default timeout and it
cannot be overridden. This change adds a new option to set the timeout
during start.
There are no users of this new option. It is needed for an upcoming
patch adding tests for XID wraparound.
Reviewed-by: Daniel Gustafsson, Noah Misch
Discussion: https://postgr.es/m/C9CF2F76-0D81-4C9D-9832-202BE8517056%40yesql.se
The set_query_timer_restart() required an argument to define a value
to query_timer_restart, but none of the existing callers passes an
argument to this function.
This changes the function to set a value without an argument.
Backpatch through 16 where the background psql TAP functions were
refactored by 664d757531.
Reviewed-by: Bharath Rupireddy, Tom Lane
Discussion: https://postgr.es/m/CAD21AoA0B6VKe_5A9nZi8i5umwSN-zJJuPVNht9DaOZ9SJumMA@mail.gmail.com
Backpatch-through: 16
We've had repeated bugs in the area of handling SLRU wraparound in the past,
some of which have caused data loss. Switching to an indexing system for SLRUs
that does not wrap around should allow us to get rid of a whole bunch
of problems and improve the overall reliability of the system.
This particular patch however only changes the indexing and doesn't address
the wraparound per se. This is going to be done in the following patches.
Author: Maxim Orlov, Aleksander Alekseev, Alexander Korotkov, Teodor Sigaev
Author: Nikita Glukhov, Pavel Borisov, Yura Sokolov
Reviewed-by: Jacob Champion, Heikki Linnakangas, Alexander Korotkov
Reviewed-by: Japin Li, Pavel Borisov, Tom Lane, Peter Eisentraut, Andres Freund
Reviewed-by: Andrey Borodin, Dilip Kumar, Aleksander Alekseev
Discussion: https://postgr.es/m/CACG%3DezZe1NQSCnfHOr78AtAZxJZeCvxrts0ygrxYwe%3DpyyjVWA%40mail.gmail.com
Discussion: https://postgr.es/m/CAJ7c6TPDOYBYrnCAeyndkBktO0WG2xSdYduTF0nxq%2BvfkmTF5Q%40mail.gmail.com
We should have done it this way all along, but we accidentally got
away with using the wrong BIO field up until OpenSSL 3.2. There,
the library's BIO routines that we rely on use the "data" field
for their own purposes, and our conflicting use causes assorted
weird behaviors up to and including core dumps when SSL connections
are attempted. Switch to using the approved field for the purpose,
i.e. app_data.
While at it, remove our configure probes for BIO_get_data as well
as the fallback implementation. BIO_{get,set}_app_data have been
there since long before any OpenSSL version that we still support,
even in the back branches.
Also, update src/test/ssl/t/001_ssltests.pl to allow for a minor
change in an error message spelling that evidently came in with 3.2.
Tristan Partin and Bo Andreson. Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAN55FZ1eDDYsYaL7mv+oSLUij2h_u6hvD4Qmv-7PK7jkji0uyQ@mail.gmail.com
If the tuple being updated is not visible to the crosscheck snapshot,
we return TM_Updated but the assertions would not hold in that case.
Move them to before the cross-check.
Fixes bug #17893. Backpatch to all supported versions.
Author: Alexander Lakhin
Backpatch-through: 12
Discussion: https://www.postgresql.org/message-id/17893-35847009eec517b5%40postgresql.org
Some buildfarm members have been failing a test related to pg_stat_io,
as an effect of 23c8c0c8f4 that has switched pg_stat_reset_shared()
from being a no-op to reset all shared stats types.
This extra reset has the effect to make pg_stat_io's counters low enough
that little concurrent activity is enough to cause a failure. Another
thing I have considered is to move this sequence at the end of
stats.sql, but there are other instabilities, one being pg_stat_wal.
Knowing that there are already tests for the reset of each individual
shared stats target, this test has limited value, so let's remove it to
minimize the number of resets done for each shared stats type. This
should hopefully improve the stability of the whole.
Discussion: https://postgr.es/m/3500949.1700935734@sss.pgh.pa.us
Fix a bug introduced by c1ec02be1d. It may happen that the executor
opens indexes on the result relation, but no rows end up being inserted.
Then the index_insert_cleanup still gets executed, but passes down NULL
to the AM callback. The AM callback may not expect this, as is the case
of brininsertcleanup, leading to a crash.
Fixed by only calling the cleanup callback if (ii_AmCache != NULL). This
way the AM can simply assume to only see a valid cache.
Reported-by: Richard Guo
Discussion: https://postgr.es/m/CAMbWs4-w9qC-o9hQox9UHvdVZAYTp8OrPQOKtwbvzWaRejTT=Q@mail.gmail.com
52e4f0cd4 introduced a bug in pgoutput in which missing values in tuples
were incorrectly filled in with NULL. The problem was the use of
CreateTupleDescCopy where CreateTupleDescCopyConstr was required, as the
former drops the constraints in the tuple description (specifically, the
default value constraint) on the floor.
The bug could result in incorrectness when a table replicated via
`REPLICA IDENTITY FULL` underwent a schema change that added a column
with a default value. The problem is that in such cases updates fill NULL
values in old tuples for missing columns for default values. Then on the
subscriber, we failed to find a matching tuple and missed updating the
required row.
Author: Nikhil Benesch
Reviewed-by: Hou Zhijie, Amit Kapila
Backpatch-through: 15
Discussion: http://postgr.es/m/CAPWqQZTEpZQamYsGMn6ZDRvVywwpVPiKH6OY4KSgA+NmeqFNzA@mail.gmail.com
Values corresponding to STATISTIC_KIND_RANGE_LENGTH_HISTOGRAM and
STATISTIC_KIND_BOUNDS_HISTOGRAM were not exposed to pg_stats when these
slot kinds were introduced in 918eee0c49.
This commit adds the missing fields to pg_stats.
Catversion is bumped.
Discussion: https://postgr.es/m/flat/b67d8b57-9357-7e82-a2e7-f6ce6eaeec67@postgrespro.ru
Author: Egor Rogov, Soumyadeep Chakraborty
Reviewed-by: Tomas Vondra, Justin Pryzby, Jian He
The copy command formed for initial sync was using parenthesis for tables
with no columns leading to syntax error. This patch avoids adding
parenthesis for such tables.
Reported-by: Justin G
Author: Vignesh C
Reviewed-by: Peter Smith, Amit Kapila
Backpatch-through: 15
Discussion: http://postgr.es/m/18203-df37fe354b626670@postgresql.org
As written, the query checked for an access method of type 's', which is
not an AM type supported in the core code.
Error introduced by 8586bf7ed8. As this query is not checking what it
should, backpatch all the way down.
Reviewed-by: Aleksander Alekseev
Discussion: https://postgr.es/m/ZVxJkAJrKbfHETiy@paquier.xyz
Backpatch-through: 12
Commits 146604ec43 and a898b409f6 added overflow checks to
interval_mul(), but not to interval_div(), which contains almost
identical code, and so is susceptible to the same kinds of
overflows. In addition, those checks did not catch all possible
overflow conditions.
Add additional checks to the "cascade down" code in interval_mul(),
and copy all the overflow checks over to the corresponding code in
interval_div(), so that they both generate "interval out of range"
errors, rather than returning bogus results.
Given that these errors are relatively easy to hit, back-patch to all
supported branches.
Per bug #18200 from Alexander Lakhin, and subsequent investigation.
Discussion: https://postgr.es/m/18200-5ea288c7b2d504b1%40postgresql.org
examine_simple_variable() left this as an unimplemented case years
ago, with the result that plans for queries involving un-flattened
CTEs might be much stupider than necessary. It's not hard to extend
the existing logic for RTE_SUBQUERY cases to also be able to drill
down into CTEs, so let's do that.
There was some discussion of whether this patch breaks the idea
of a MATERIALIZED CTE being an optimization fence. We concluded
it's okay, because we already allow the outer planner level to
see the estimated width and rowcount of the CTE result, and
letting it see column statistics too seems fairly equivalent.
Basically, what we expect of the optimization fence is that the
outer query should not affect the plan chosen for the CTE query.
Once that plan is chosen, it's okay for the outer planner level
to make use of whatever information we have about it.
Jian Guo and Tom Lane, per complaint from Hans Buschmann
Discussion: https://postgr.es/m/4504e67078d648cdac3651b2960da6e7@nidsa.net
This adds alternative expected files for various tests.
In src/test/regress/sql/password.sql, we make a small change to the
test so that the CREATE ROLE still succeeds even if the ALTER ROLE
that attempts to set a password might fail. That way, the roles are
available for the rest of the test file in either case.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://www.postgresql.org/message-id/flat/dbbd927f-ef1f-c9a1-4ec6-c759778ac852%40enterprisedb.com
contain_mutable_functions and contain_volatile_functions give
reliable answers only after expression preprocessing (specifically
eval_const_expressions). Some places understand this, but some did
not get the memo --- which is not entirely their fault, because the
problem is documented only in places far away from those functions.
Introduce wrapper functions that allow doing the right thing easily,
and add commentary in hopes of preventing future mistakes from
copy-and-paste of code that's only conditionally safe.
Two actual bugs of this ilk are fixed here. We failed to preprocess
column GENERATED expressions before checking mutability, so that the
code could fail to detect the use of a volatile function
default-argument expression, or it could reject a polymorphic function
that is actually immutable on the datatype of interest. Likewise,
column DEFAULT expressions weren't preprocessed before determining if
it's safe to apply the attmissingval mechanism. A false negative
would just result in an unnecessary table rewrite, but a false
positive could allow the attmissingval mechanism to be used in a case
where it should not be, resulting in unexpected initial values in a
new column.
In passing, re-order the steps in ComputePartitionAttrs so that its
checks for invalid column references are done before applying
expression_planner, rather than after. The previous coding would
not complain if a partition expression contains a disallowed column
reference that gets optimized away by constant folding, which seems
to me to be a behavior we do not want.
Per bug #18097 from Jim Keener. Back-patch to all supported versions.
Discussion: https://postgr.es/m/18097-ebb179674f22932f@postgresql.org
Currently, pg_stat_reset_shared() cannot reset the counters in the view
pg_stat_slru even if it is a type of shared stats. This patch adds
support for a new value in pg_stat_reset_shared(), called "slru", able
to do that. Note that pg_stat_reset_shared(NULL) also resets SLRU
counters.
There may be a point in removing pg_stat_reset_slru() that was
introduced in 28cac71bd3 (v13~) as the new option overlaps with this
function, but we would lose the ability to reset individual SLRU
counters. This is left for future reconsideration.
Author: Atsushi Torikoshi
Discussion: https://postgr.es/m/e3c25d72e81378e7b64f3c52e0306fc9@oss.nttdata.com
This adds support for infinity to the interval data type, using the
same input/output representation as the other date/time data types
that support infinity. This allows various arithmetic operations on
infinite dates, timestamps and intervals.
The new values are represented by setting all fields of the interval
to INT32/64_MIN for -infinity, and INT32/64_MAX for +infinity. This
ensures that they compare as less/greater than all other interval
values, without the need for any special-case comparison code.
Note that, since those 2 values were formerly accepted as legal finite
intervals, pg_upgrade and dump/restore from an old database will turn
them from finite to infinite intervals. That seems OK, since those
exact values should be extremely rare in practice, and they are
outside the documented range supported by the interval type, which
gives us a certain amount of leeway.
Bump catalog version.
Joseph Koshakow, Jian He, and Ashutosh Bapat, reviewed by me.
Discussion: https://postgr.es/m/CAAvxfHea4%2BsPybKK7agDYOMo9N-Z3J6ZXf3BOM79pFsFNcRjwA%40mail.gmail.com
pg_stat_reset_slru currently requires an input argument, either:
- NULL to reset the SLRU counters of everything.
- A specific value to reset a single SLRU cache.
This commit adds support for a new pattern: pg_stat_reset_slru without
any argument works the same way as pg_stat_reset_slru(NULL), relying on
a DEFAULT in the function definition to handle this case. This makes
the function more consistent with 23c8c0c8f4.
Bump catalog version.
Author: Bharath Rupireddy
Reviewed-by: Atsushi Torikoshi
Discussion: https://postgr.es/m/CALj2ACW1VizYg01EeH_cA-7qA+4NzWVAoZ5Lw9_XYO1RRHAZbA@mail.gmail.com
checkExtensionMembership() set the DUMP_COMPONENT_SECLABEL and
DUMP_COMPONENT_POLICY flags for extension member objects, even though
we lack any infrastructure for tracking extensions' initial settings
of these properties. This is not OK. The result was that a dump
would always include commands to set these properties for extension
objects that have them, with at least three negative consequences:
1. The restoring user might not have privilege to set these properties
on these objects.
2. The properties might be incorrect/irrelevant for the version of the
extension that's installed in the destination database.
3. The dump itself might fail, in the case of RLS properties attached
to extension tables that the dumping user lacks privilege to LOCK.
(That's because we must get at least AccessShareLock to ensure that
we don't fail while trying to decompile the RLS expressions.)
When and if somebody cares to invent initial-state infrastructure for
extensions' RLS policies and security labels, we could think about
finding another way around problem #3. But in the absence of such
infrastructure, this whole thing is just wrong and we shouldn't do it.
(Note: this applies only to ordinary dumps; binary-upgrade dumps
still dump and restore extension member objects separately, with
all properties.)
Tom Lane and Jacob Champion. Back-patch to all supported branches.
Discussion: https://postgr.es/m/00d46a48-3324-d9a0-49bf-e7f0f11d1038@timescale.com
Default privileges are represented as NULL::aclitem[] in catalog ACL
columns, while revoking all privileges leaves an empty aclitem[].
These two cases used to produce identical output in psql meta-commands
like \dp. Using something like "\pset null '(default)'" as a
workaround for spotting the difference did not work, because null
values were always displayed as empty strings by describe.c's
meta-commands.
This patch improves that with two changes:
1. Print "(none)" for empty privileges so that the user is able to
distinguish them from default privileges, even without special
workarounds.
2. Remove the special handling of null values in describe.c,
so that "\pset null" is honored like everywhere else.
(This affects all output from these commands, not only ACLs.)
The privileges shown by \dconfig+ and \ddp as well as the column
privileges shown by \dp are not affected by change #1, because the
respective aclitem[] is reset to NULL or deleted from the catalog
instead of leaving an empty array.
Erik Wienhold and Laurenz Albe
Discussion: https://postgr.es/m/1966228777.127452.1694979110595@office.mailbox.org
Rewrite array_in() and its subroutines so that we make only one
pass over the input text, rather than two. This requires
potentially re-pallocing the working arrays values[] and nulls[]
larger than our initial guess, but that cost will hopefully be made
up by avoiding duplicate parsing. In any case this coding seems
much clearer and more straightforward than what we had before.
This also fixes array_in() to reject non-rectangular input (that is,
different brace depths in different parts of the input) more reliably
than before, and to give a better error message when it does so.
This is analogous to the plpython and plperl fixes in 0553528e7 and
f47004add. Like those PLs, we now accept input such as '{{},{}}'
as a valid representation of an empty array, which we did not before.
Additionally, reject explicit array subscripts that are outside the
integer range (previously you just got whatever atoi() converted
them to), and make some other minor improvements in error reporting.
Although this is arguably a bug fix, it's also a behavioral change
that might trip somebody up, so no back-patch.
Tom Lane, Heikki Linnakangas, and Jian He. Thanks to Alexander Lakhin
for the initial report and for review/testing.
Discussion: https://postgr.es/m/2794005.1683042087@sss.pgh.pa.us
Commit 00d7fb5e2e started to use REGBUF_NO_CHANGE at a few places in the
code where we register the buffer before marking it dirty but missed
updating one of the code flows in the hash index where we free the overflow
page without any live tuples on it.
Author: Amit Kapila and Hayato Kuroda
Discussion: http://postgr.es/m/f045c8f7-ee24-ead6-3679-c04a43d21351@gmail.com
Currently, pg_stat_reset_shared() can use an argument to specify the
target of statistics to reset, doing nothing for NULL as it is strict.
This patch adds to pg_stat_reset_shared() the possibility to reset all
the stats types already handled in this function rather than do nothing
if the argument value given is NULL or if nothing is specified
(proisstrict is switched to false). Like previously, SLRUs are not
included in what gets reset.
The idea to use NULL or no argument to control if all the shared stats
already covered by this function should be reset has been proposed by
Andres Freund.
Bump catalog version.
Author: Atsushi Torikoshi
Reviewed-by: Kyotaro Horiguchi, Michael Paquier, Bharath Rupireddy,
Matthias van de Meent
Discussion: https://postgr.es/m/4291a55137ddda77cf7cc5f46e846daf@oss.nttdata.com
Three queries did not consider partitioned indexes and tables, and
surrounding comments have not been updated in a while.
Like 4b9fbd6be4, this is only cosmetic currently as no such relkinds
exist at this stage of the regression tests, but running these queries
on existing clusters could lead to incorrect results.
Author: Jian He, Michael Paquier
Discussion: https://postgr.es/m/CACJufxGsB1ciahkNDccyxhw-Pfp_-_y+Wx+1BOdRyVVxKojAbg@mail.gmail.com
It seems that a PHV evaluated/needed at or below the self join should not have
a problem if we remove the self join. But this requires further investigation.
For now, we just do not remove self joins if the rel to be removed is laterally
referenced by PHVs.
Discussion: https://postgr.es/m/CAMbWs4-ns73VF9gi37q61G3dS6Xuos+HtryMaBh37WQn=BsaJw@mail.gmail.com
Author: Richard Guo
We can simplify FieldSelect on a whole-row Var into a plain Var
for the selected field. However, we should copy the whole-row Var's
varnullingrels when we do so, because the new Var is clearly nullable
by exactly the same rels as the original. Failure to do this led to
errors like "wrong varnullingrels (b) (expected (b 3)) for Var 2/2".
Richard Guo, per bug #18184 from Marian Krucina. Back-patch to
v16 where varnullingrels was introduced.
Discussion: https://postgr.es/m/18184-5868dd258782058e@postgresql.org
When casting an interval to a time, the original code suffered from
64-bit integer overflow for inputs with a sufficiently large negative
"time" field, leading to bogus results.
Fix by rewriting the algorithm in a simpler form, that more obviously
cannot overflow. While at it, improve the test coverage to include
negative interval inputs.
Discussion: https://postgr.es/m/CAEZATCXoUKHkcuq4q63hkiPsKZJd0kZWzgKtU%2BNT0aU4wbf_Pw%40mail.gmail.com
When executing a MERGE UPDATE action, if the UPDATE is turned into a
cross-partition DELETE then INSERT, do not attempt to invoke AFTER
UPDATE ROW triggers, or any of the other post-update actions in
ExecUpdateEpilogue().
For consistency with a plain UPDATE command, such triggers should not
be fired (and typically fail anyway), and similarly, other post-update
actions, such as WCO/RLS checks should not be executed, and might also
lead to unexpected failures.
Therefore, as with ExecUpdate(), make ExecMergeMatched() return
immediately if ExecUpdateAct() reports that a cross-partition update
was done, to be sure that no further processing is done for that
tuple.
Back-patch to v15, where MERGE was introduced.
Discussion: https://postgr.es/m/CAEZATCWjBgagyNZs02vgDF0DvASYj-iHTFtXG2-nP3orZhmtcw%40mail.gmail.com
When computing "0 - INT64_MIN", most platforms would report an
overflow error, which is correct. However, platforms without integer
overflow builtins or 128-bit integers would fail to spot the overflow,
and incorrectly return INT64_MIN.
Back-patch to all supported branches.
Patch be me. Thanks to Jian He for initial investigation, and Laurenz
Albe and Tom Lane for review.
Discussion: https://postgr.es/m/CAEZATCUNK-AZSD0jVdgkk0N%3DNcAXBWeAEX-QU9AnJPensikmdQ%40mail.gmail.com
Instead of having a separate array/hash for each resource kind, use a
single array and hash to hold all kinds of resources. This makes it
possible to introduce new resource "kinds" without having to modify
the ResourceOwnerData struct. In particular, this makes it possible
for extensions to register custom resource kinds.
The old approach was to have a small array of resources of each kind,
and if it fills up, switch to a hash table. The new approach also uses
an array and a hash, but now the array and the hash are used at the
same time. The array is used to hold the recently added resources, and
when it fills up, they are moved to the hash. This keeps the access to
recent entries fast, even when there are a lot of long-held resources.
All the resource-specific ResourceOwnerEnlarge*(),
ResourceOwnerRemember*(), and ResourceOwnerForget*() functions have
been replaced with three generic functions that take resource kind as
argument. For convenience, we still define resource-specific wrapper
macros around the generic functions with the old names, but they are
now defined in the source files that use those resource kinds.
The release callback no longer needs to call ResourceOwnerForget on
the resource being released. ResourceOwnerRelease unregisters the
resource from the owner before calling the callback. That needed some
changes in bufmgr.c and some other files, where releasing the
resources previously always called ResourceOwnerForget.
Each resource kind specifies a release priority, and
ResourceOwnerReleaseAll releases the resources in priority order. To
make that possible, we have to restrict what you can do between
phases. After calling ResourceOwnerRelease(), you are no longer
allowed to remember any more resources in it or to forget any
previously remembered resources by calling ResourceOwnerForget. There
was one case where that was done previously. At subtransaction commit,
AtEOSubXact_Inval() would handle the invalidation messages and call
RelationFlushRelation(), which temporarily increased the reference
count on the relation being flushed. We now switch to the parent
subtransaction's resource owner before calling AtEOSubXact_Inval(), so
that there is a valid ResourceOwner to temporarily hold that relcache
reference.
Other end-of-xact routines make similar calls to AtEOXact_Inval()
between release phases, but I didn't see any regression test failures
from those, so I'm not sure if they could reach a codepath that needs
remembering extra resources.
There were two exceptions to how the resource leak WARNINGs on commit
were printed previously: llvmjit silently released the context without
printing the warning, and a leaked buffer io triggered a PANIC. Now
everything prints a WARNING, including those cases.
Add tests in src/test/modules/test_resowner.
Reviewed-by: Aleksander Alekseev, Michael Paquier, Julien Rouhaud
Reviewed-by: Kyotaro Horiguchi, Hayato Kuroda, Álvaro Herrera, Zhihong Yu
Reviewed-by: Peter Eisentraut, Andres Freund
Discussion: https://www.postgresql.org/message-id/cbfabeb0-cd3c-e951-a572-19b365ed314d%40iki.fi
`openssl` is an optional dependency in the meson build as it may not be
installed in an environment even if SSL libraries are around. The meson
scripts assume that, but the SSL tests thought that it was a hard
dependency, causing a meson installation to fail if `openssl` could not
be found. Like similar tests that depend on external commands, and to
be consistent with ./configure for the SSL tests, this commit makes the
command existence optional in the tests.
Author: Tristan Partin
Discussion: https://postgr.es/m/CWSX6P5OUUM5.N7B74KQ06ZP6@neon.tech
Backpatch-through: 16
array_set_element() and related functions allow an array to be
enlarged by assigning to subscripts outside the current array bounds.
While these places were careful to check that the new bounds are
allowable, they neglected to consider the risk of integer overflow
in computing the new bounds. In edge cases, we could compute new
bounds that are invalid but get past the subsequent checks,
allowing bad things to happen. Memory stomps that are potentially
exploitable for arbitrary code execution are possible, and so is
disclosure of server memory.
To fix, perform the hazardous computations using overflow-detecting
arithmetic routines, which fortunately exist in all still-supported
branches.
The test cases added for this generate (after patching) errors that
mention the value of MaxArraySize, which is platform-dependent.
Rather than introduce multiple expected-files, use psql's VERBOSITY
parameter to suppress the printing of the message text. v11 psql
lacks that parameter, so omit the tests in that branch.
Our thanks to Pedro Gallegos for reporting this problem.
Security: CVE-2023-5869
transformAggregateCall() captures the datatypes of the aggregate's
arguments immediately to construct the Aggref.aggargtypes list.
This seems reasonable because the arguments have already been
transformed --- but there is an edge case where they haven't been.
Specifically, if we have an unknown-type literal in an ANY argument
position, nothing will have been done with it earlier. But if we
also have DISTINCT, then addTargetToGroupList() converts the literal
to "text" type, resulting in the aggargtypes list not matching the
actual runtime type of the argument. The end result is that the
aggregate tries to interpret a "text" value as being of type
"unknown", that is a zero-terminated C string. If the text value
contains no zero bytes, this could result in disclosure of server
memory following the text literal value.
To fix, move the collection of the aggargtypes list to the end
of transformAggregateCall(), after DISTINCT has been handled.
This requires slightly more code, but not a great deal.
Our thanks to Jingzhou Fu for reporting this problem.
Security: CVE-2023-5868
A PostgreSQL release tarball contains a number of prebuilt files, in
particular files produced by bison, flex, perl, and well as html and
man documentation. We have done this consistent with established
practice at the time to not require these tools for building from a
tarball. Some of these tools were hard to get, or get the right
version of, from time to time, and shipping the prebuilt output was a
convenience to users.
Now this has at least two problems:
One, we have to make the build system(s) work in two modes: Building
from a git checkout and building from a tarball. This is pretty
complicated, but it works so far for autoconf/make. It does not
currently work for meson; you can currently only build with meson from
a git checkout. Making meson builds work from a tarball seems very
difficult or impossible. One particular problem is that since meson
requires a separate build directory, we cannot make the build update
files like gram.h in the source tree. So if you were to build from a
tarball and update gram.y, you will have a gram.h in the source tree
and one in the build tree, but the way things work is that the
compiler will always use the one in the source tree. So you cannot,
for example, make any gram.y changes when building from a tarball.
This seems impossible to fix in a non-horrible way.
Second, there is increased interest nowadays in precisely tracking the
origin of software. We can reasonably track contributions into the
git tree, and users can reasonably track the path from a tarball to
packages and downloads and installs. But what happens between the git
tree and the tarball is obscure and in some cases non-reproducible.
The solution for both of these issues is to get rid of the step that
adds prebuilt files to the tarball. The tarball now only contains
what is in the git tree (*). Getting the additional build
dependencies is no longer a problem nowadays, and the complications to
keep these dual build modes working are significant. And of course we
want to get the meson build system working universally.
This commit removes the make distprep target altogether. The make
dist target continues to do its job, it just doesn't call distprep
anymore.
(*) - The tarball also contains the INSTALL file that is built at make
dist time, but not by distprep. This is unchanged for now.
The make maintainer-clean target, whose job it is to remove the
prebuilt files in addition to what make distclean does, is now just an
alias to make distprep. (In practice, it is probably obsolete given
that git clean is available.)
The following programs are now hard build requirements in configure
(they were already required by meson.build):
- bison
- flex
- perl
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/e07408d9-e5f2-d9fd-5672-f53354e9305e@eisentraut.org
Documentation says it cannot signal "a backend owned by a superuser".
On the contrary, it could signal background workers, including the
logical replication launcher. It could signal autovacuum workers and
the autovacuum launcher. Block all that. Signaling autovacuum workers
and those two launchers doesn't stall progress beyond what one could
achieve other ways. If a cluster uses a non-core extension with a
background worker that does not auto-restart, this could create a denial
of service with respect to that background worker. A background worker
with bugs in its code for responding to terminations or cancellations
could experience those bugs at a time the pg_signal_backend member
chooses. Back-patch to v11 (all supported versions).
Reviewed by Jelte Fennema-Nio. Reported by Hemanth Sandrana and
Mahendrakar Srinivasarao.
Security: CVE-2023-5870
This function implements the standard XMLTest function, which
converts text into xml text nodes. It uses the libxml2 function
xmlEncodeSpecialChars to escape predefined entities (&"<>), so
that those do not cause any conflict when concatenating the text
node output with existing xml documents.
This also adds a note in features.sgml about not supporting
XML(SEQUENCE). The SQL specification defines a RETURNING clause
to a set of XML functions, where RETURNING CONTENT or RETURNING
SEQUENCE can be defined. Since PostgreSQL doesn't support
XML(SEQUENCE) all of these functions operate with an
implicit RETURNING CONTENT.
Author: Jim Jones <jim.jones@uni-muenster.de>
Reviewed-by: Vik Fearing <vik@postgresfriends.org>
Discussion: https://postgr.es/m/86617a66-ec95-581f-8d54-08059cca8885@uni-muenster.de
recurse_set_operations() uses the parse tree for the group number estimation,
because of the "varno 0" hack. At the same time 2489d76c49 made root->parse
and corresponding parent_root->simple_rte_array[]->subquery distinct copies
of the parse tree, while d3d55ce571 introduced self-join removal replacing
relid of removed relation only in one of the copies.
The present commit fixes this bug by making recurse_set_operations() call
estimate_num_groups() with the copy of the parse tree processed by self-join
removal.
In future, we may think about maintaining just one copy of the parse tree
and/or keeping removed relids as aliases.
Reported-by: Zuming Jiang
Bug: #18170
Discussion: https://postgr.es/m/flat/18170-f1d17bf9a0d58b24%40postgresql.org
Author: Richard Guo, Alexander Korotkov
Reviewed-by: Andrei Lepikhov
Introduce unicode_version(), icu_unicode_version(), and
unicode_assigned().
The latter requires introducing a new lookup table for the Unicode
General Category, which is generated along with the other Unicode
lookup tables.
Discussion: https://postgr.es/m/CA+TgmoYzYR-yhU6k1XFCADeyj=Oyz2PkVsa3iKv+keM8wp-F_A@mail.gmail.com
Reviewed-by: Peter Eisentraut
The test missed that custom GUCs need to be ignored from the list of
parameters that can exist in postgresql.conf.sample. This caused the
test to fail on a server where such a module is loaded, when using
EXTRA_INSTALL and TEMP_CONFIG, for instance.
Author: Anton A. Melnikov
Discussion: https://postgr.es/m/fc5509ce-5144-4dac-8d13-21793da44fc5@postgrespro.ru
Backpatch-through: 15
Historically, the statistics of the checkpointer have been always part
of pg_stat_bgwriter. This commit removes a few columns from
pg_stat_bgwriter, and introduces pg_stat_checkpointer with equivalent,
renamed columns (plus a new one for the reset timestamp):
- checkpoints_timed -> num_timed
- checkpoints_req -> num_requested
- checkpoint_write_time -> write_time
- checkpoint_sync_time -> sync_time
- buffers_checkpoint -> buffers_written
The fields of PgStat_CheckpointerStats and its SQL functions are renamed
to match with the new field names, for consistency. Note that
background writer and checkpointer have been split into two different
processes in commits 806a2aee37 and bf405ba8e4. The pgstat
structures were already split, making this change straight-forward.
Bump catalog version.
Author: Bharath Rupireddy
Reviewed-by: Bertrand Drouvot, Andres Freund, Michael Paquier
Discussion: https://postgr.es/m/CALj2ACVxX2ii=66RypXRweZe2EsBRiPMj0aHfRfHUeXJcC7kHg@mail.gmail.com
Handling of login trigger FATAL error could cause a timing-dependant panic of
IPC::Run. This commit excludes checks which involves handling of such errors.
Reported-by: Tom Lane
Discussion: https://postgr.es/m/2268825.1698618066%40sss.pgh.pa.us
The original code did very little to guard against integer or floating
point overflow when computing the interval's fields. Detect any such
overflows and error out, rather than silently returning bogus results.
Joseph Koshakow, reviewed by Ashutosh Bapat and me.
Discussion: https://postgr.es/m/CAAvxfHcm1TPwH_zaGWuFoL8pZBestbRZTU6Z%3D-RvAdSXTPbKfg%40mail.gmail.com
When calculating distance for interval values, the code mostly mimicked
interval_mi, i.e. it built a new interval value for the difference.
That however does not work for sufficiently distant interval values,
when the difference overflows the interval range.
Instead, we can calculate the distance directly, without constructing
the intermediate (and unnecessary) interval value.
Backpatch to 14, where minmax-multi indexes were introduced.
Reported-by: Dean Rasheed
Reviewed-by: Ashutosh Bapat, Dean Rasheed
Backpatch-through: 14
Discussion: https://postgr.es/m/eef0ea8c-4aaa-8d0d-027f-58b1f35dd170@enterprisedb.com
Make sure that infinite values in date/timestamp columns are treated as
if in infinite distance. Infinite values should not be merged with other
values, leaving them as outliers. The code however returned distance 0
in this case, so that infinite values were merged first. While this does
not break the index (i.e. it still produces correct query results), it
may make it much less efficient.
We don't need explicit handling of infinite date/timestamp values when
calculating distances, because those values are represented as extreme
but regular values (e.g. INT64_MIN/MAX for the timestamp type).
We don't need an exact distance, just a value that is much larger than
distanced between regular values. With the added cast to double values,
we can simply subtract the values.
The regression test queries a value in the "gap" and checks the range
was properly eliminated by the BRIN index.
This only affects minmax-multi indexes on timestamp/date columns with
infinite values, which is not very common in practice. The affected
indexes may need to be rebuilt.
Backpatch to 14, where minmax-multi indexes were introduced.
Reported-by: Ashutosh Bapat
Reviewed-by: Ashutosh Bapat, Dean Rasheed
Backpatch-through: 14
Discussion: https://postgr.es/m/eef0ea8c-4aaa-8d0d-027f-58b1f35dd170@enterprisedb.com
When calculating the distance between date values, make sure to subtract
them in the right order, i.e. (larger - smaller).
The distance is used to determine which values to merge, and is expected
to be a positive value. The code unfortunately did the subtraction in
the opposite order, i.e. (smaller - larger), thus producing negative
values and merging values the most distant values first.
The resulting index is correct (i.e. produces correct results), but may
be significantly less efficient. This affects all minmax-multi indexes
on date columns.
Backpatch to 14, where minmax-multi indexes were introduced.
Reported-by: Ashutosh Bapat
Reviewed-by: Ashutosh Bapat, Dean Rasheed
Backpatch-through: 14
Discussion: https://postgr.es/m/eef0ea8c-4aaa-8d0d-027f-58b1f35dd170@enterprisedb.com
When calculating distances for timestamp values for BRIN minmax-multi
indexes, we need to be careful about overflows for extreme values. If
the value overflows into a negative value, the index may be inefficient.
The new regression test checks this for the timestamp type by adding a
table with enough values to force range compaction/merging. The values
are close to min/max, which means a risk of overflow.
Fixed by converting the int64 values to double first, before calculating
the distance. This prevents the overflow. We may lose some precision, of
course, but that's good enough. In the worst case we build a slightly
less efficient index, but for large distances this won't matter.
This only affects minmax-multi indexes on timestamp columns, with ranges
containing values sufficiently distant to cause an overflow. That seems
like a fairly rare case in practice.
Backpatch to 14, where minmax-multi indexes were introduced.
Reported-by: Ashutosh Bapat
Reviewed-by: Ashutosh Bapat, Dean Rasheed
Backpatch-through: 14
Discussion: https://postgr.es/m/eef0ea8c-4aaa-8d0d-027f-58b1f35dd170@enterprisedb.com
Two attributes related to checkpointer statistics are removed in this
commit:
- buffers_backend, that counts the number of buffers written directly by
a backend.
- buffers_backend_fsync, that counts the number of times a backend had
to do fsync() by its own.
These are actually not checkpointer properties but backend properties.
Also, pg_stat_io provides a more accurate and equivalent report of these
numbers, by tracking all the I/O stats related to backends, including
writes and fsyncs, so storing them in pg_stat_checkpointer was
redundant.
Thanks also to Robert Haas and Amit Kapila for their input.
Bump catalog version.
Author: Bharath Rupireddy
Reviewed-by: Bertrand Drouvot, Andres Freund
Discussion: https://postgr.es/m/20230210004604.mcszbscsqs3bc5nx@awork3.anarazel.de
Since C99, there can be a trailing comma after the last value in an
enum definition. A lot of new code has been introducing this style on
the fly. Some new patches are now taking an inconsistent approach to
this. Some add the last comma on the fly if they add a new last
value, some are trying to preserve the existing style in each place,
some are even dropping the last comma if there was one. We could
nudge this all in a consistent direction if we just add the trailing
commas everywhere once.
I omitted a few places where there was a fixed "last" value that will
always stay last. I also skipped the header files of libpq and ecpg,
in case people want to use those with older compilers. There were
also a small number of cases where the enum type wasn't used anywhere
(but the enum values were), which ended up confusing pgindent a bit,
so I left those alone.
Discussion: https://www.postgresql.org/message-id/flat/386f8c45-c8ac-4681-8add-e3b0852c1620%40eisentraut.org
The Self Join Elimination (SJE) feature removes an inner join of a plain table
to itself in the query tree if is proved that the join can be replaced with
a scan without impacting the query result. Self join and inner relation are
replaced with the outer in query, equivalence classes, and planner info
structures. Also, inner restrictlist moves to the outer one with removing
duplicated clauses. Thus, this optimization reduces the length of the range
table list (this especially makes sense for partitioned relations), reduces
the number of restriction clauses === selectivity estimations, and potentially
can improve total planner prediction for the query.
The SJE proof is based on innerrel_is_unique machinery.
We can remove a self-join when for each outer row:
1. At most one inner row matches the join clause.
2. Each matched inner row must be (physically) the same row as the outer one.
In this patch we use the next approach to identify a self-join:
1. Collect all merge-joinable join quals which look like a.x = b.x
2. Add to the list above the baseretrictinfo of the inner table.
3. Check innerrel_is_unique() for the qual list. If it returns false, skip
this pair of joining tables.
4. Check uniqueness, proved by the baserestrictinfo clauses. To prove
the possibility of self-join elimination inner and outer clauses must have
an exact match.
The relation replacement procedure is not trivial and it is partly combined
with the one, used to remove useless left joins. Tests, covering this feature,
were added to join.sql. Some regression tests changed due to self-join removal
logic.
Discussion: https://postgr.es/m/flat/64486b0b-0404-e39e-322d-0801154901f3%40postgrespro.ru
Author: Andrey Lepikhov, Alexander Kuzmenkov
Reviewed-by: Tom Lane, Robert Haas, Andres Freund, Simon Riggs, Jonathan S. Katz
Reviewed-by: David Rowley, Thomas Munro, Konstantin Knizhnik, Heikki Linnakangas
Reviewed-by: Hywel Carver, Laurenz Albe, Ronan Dunklau, vignesh C, Zhihong Yu
Reviewed-by: Greg Stark, Jaime Casanova, Michał Kłeczek, Alena Rybakina
Reviewed-by: Alexander Korotkov
Instead of connecting to the server with psql to check if it is ready
for running tests, this changes pg_regress to use PQPing which avoids
performing system() calls which are expensive on some platforms, like
Windows. The frequency of tests is also increased in order to connect
to the server faster.
This patch is part of a larger effort to make testing consume fewer
resources in order to be able to fit more tests into the available
CI system constraints.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20230823192239.jxew5s3sjru63lio@awork3.anarazel.de
When an UPDATE/DELETE/MERGE's target table is an old-style
inheritance tree, it's possible for the parent to get excluded
from the plan while some children are not. (I believe this is
only possible if we can prove that a CHECK ... NO INHERIT
constraint on the parent contradicts the query WHERE clause,
so it's a very unusual case.) In such a case, ExecInitModifyTable
mistakenly concluded that the first surviving child is the target
table, leading to at least two bugs:
1. The wrong table's statement-level triggers would get fired.
2. In v16 and up, it was possible to fail with "invalid perminfoindex
0 in RTE with relid nnnn" due to the child RTE not having permissions
data included in the query plan. This was hard to reproduce reliably
because it did not occur unless the update triggered some non-HOT
index updates.
In v14 and up, this is easy to fix by defining ModifyTable.rootRelation
to be the parent RTE in plain inheritance as well as partitioned cases.
While the wrong-triggers bug also appears in older branches, the
relevant code in both the planner and executor is quite a bit
different, so it would take a good deal of effort to develop and
test a suitable patch. Given the lack of field complaints about the
trigger issue, I'll desist for now. (Patching v11 for this seems
unwise anyway, given that it will have no more releases after next
month.)
Per bug #18147 from Hans Buschmann.
Amit Langote and Tom Lane
Discussion: https://postgr.es/m/18147-6fc796538913ee88@postgresql.org
Previously, ALTER SYSTEM failed if the target GUC wasn't present in
the session's GUC hashtable. That is a reasonable behavior for core
(single-part) GUC names, and for custom GUCs for which we have loaded
an extension that's reserved the prefix. But it's unnecessarily
restrictive otherwise, and it also causes inconsistent behavior:
you can "ALTER SYSTEM SET foo.bar" only if you did "SET foo.bar"
earlier in the session. That's fairly silly.
Hence, refactor things so that we can execute ALTER SYSTEM even
if the variable doesn't have a GUC hashtable entry, as long as the
name meets the custom-variable naming requirements and does not
have a reserved prefix. (It's safe to do this even if the
variable belongs to an extension we currently don't have loaded.
A bad value will at worst cause a WARNING when the extension
does get loaded.)
Also, adjust GRANT ON PARAMETER to have the same opinions about
whether to allow an unrecognized GUC name, and to throw the
same errors if not (it previously used a one-size-fits-all
message for several distinguishable conditions). By default,
only a superuser will be allowed to do ALTER SYSTEM SET on an
unrecognized name, but it's possible to GRANT the ability to
do it.
Patch by me, pursuant to a documentation complaint from
Gavin Panella. Arguably this is a bug fix, but given the
lack of other complaints I'll refrain from back-patching.
Discussion: https://postgr.es/m/2617358.1697501956@sss.pgh.pa.us
Discussion: https://postgr.es/m/169746329791.169914.16613647309012285391@wrigleys.postgresql.org
Allow the COMMUTATOR, NEGATOR, MERGES, and HASHES attributes to be set
by ALTER OPERATOR. However, we don't allow COMMUTATOR/NEGATOR to be
changed once set, nor allow the MERGES/HASHES flags to be unset once
set. Changes like that might invalidate plans already made, and
dealing with the consequences seems like more trouble than it's worth.
The main use-case we foresee for this is to allow addition of missed
properties in extension update scripts, such as extending an existing
operator to support hashing. So only transitions from not-set to set
states seem very useful.
This patch also causes us to reject some incorrect cases that formerly
resulted in inconsistent catalog state, such as trying to set the
commutator of an operator to be some other operator that already has a
(different) commutator.
While at it, move the InvokeObjectPostCreateHook call for CREATE
OPERATOR to not occur until after we've fixed up commutator or negator
links as needed. The previous ordering could only be justified by
thinking of the OperatorUpd call as a kind of ALTER OPERATOR step;
but we don't call InvokeObjectPostAlterHook therein. It seems better
to let the hook see the final state of the operator object.
In the documentation, move the discussion of how to establish
commutator pairs from xoper.sgml to the CREATE OPERATOR ref page.
Tommy Pavlicek, reviewed and editorialized a bit by me
Discussion: https://postgr.es/m/CAEhP-W-vGVzf4udhR5M8Bdv88UYnPrhoSkj3ieR3QNrsGQoqdg@mail.gmail.com
A couple of TAP tests make use of wal_level=logical for nodes that do
not need to do any kind of logical decoding operations, like
subscription nodes on which changes are only applied. This can be
confusing when reading these tests as setup examples, so let's remove
this configuration where not required (contrary to two-way logical
replication and similar more complex cases). This simplifies the tests
a bit, making them slightly cheaper with less WAL generated overall.
Author: Hayato Kuroda
Discussion: https://postgr.es/m/TYAPR01MB5866946BCEB747ABE513ACC6F5D5A@TYAPR01MB5866.jpnprd01.prod.outlook.com
There was no I/O timing statistics for counting read and write timings
on local blocks, contrary to the counterparts for temp and shared
blocks. This information is available when track_io_timing is enabled.
The output of EXPLAIN is updated to show this information. An update of
pg_stat_statements is planned next.
Author: Nazir Bilal Yavuz
Reviewed-by: Robert Haas, Melanie Plageman
Discussion: https://postgr.es/m/CAN55FZ19Ss279mZuqGbuUNxka0iPbLgYuOQXqAKewrjNrp27VA@mail.gmail.com
These two counters, defined in BufferUsage to track respectively the
time spent while reading and writing blocks have historically only
tracked data related to shared buffers, when track_io_timing is enabled.
An upcoming patch to add specific counters for local buffers will take
advantage of this rename as it has come up that no data is currently
tracked for local buffers, and tracking local and shared buffers using
the same fields would be inconsistent with the treatment done for temp
buffers. Renaming the existing fields clarifies what the block type of
each stats field is.
pg_stat_statement is updated to reflect the rename. No extension
version bump is required as 5a3423ad8e has done one, affecting v17~.
Author: Nazir Bilal Yavuz
Reviewed-by: Robert Haas, Melanie Plageman
Discussion: https://postgr.es/m/CAN55FZ19Ss279mZuqGbuUNxka0iPbLgYuOQXqAKewrjNrp27VA@mail.gmail.com
Use a modulo operator instead of implementing the same behavior
with a loop. The loop solution is doubtless microscopically
faster for the typical case of only wrapping into the very next
day, but maybe not so much for large interval values. In any
case, timetz is such a backwater that it's doubtful anybody
would notice any performance change anyway.
This avoids a compiler bug occurring in AIX's xlc, even in pretty
late-model revisions.
We did not have test coverage for the case where the initial
result->time value is negative, so add that.
For the moment, install this only in HEAD. My plan is to
back-patch the test case, and then the code change assuming that
buildfarm testing proves the bug occurs in the back branches.
(That seems pretty likely, but let's find out for sure.)
Per buildfarm results from commits 97957fdba and 2f0472030.
Thanks to Michael Paquier for the idea to use a modulo operation
to replace the faulty loop.
Discussion: https://postgr.es/m/CA+hUKGK=DOC+hE-62FKfZy=Ybt5uLkrg3zCZD-jFykM-iPn8yw@mail.gmail.com
Restart the apply worker if the subscription owner's superuser privileges
have been revoked. This is required so that the subscription connection
string gets revalidated and use the password option to connect to the
publisher for non-superusers, if required.
Author: Vignesh C
Reviewed-by: Amit Kapila
Discussion: http://postgr.es/m/CALDaNm2Dxmhq08nr4P6G+24QvdBo_GAVyZ_Q1TcGYK+8NHs9xw@mail.gmail.com
Extend the test added by commit 97957fdba so that it also covers
timetz_izone(), that is the "AT TIME ZONE interval" case.
This is mostly to see if xlc's apparent bug occurs there too,
but more code coverage is always welcome.
Discussion: https://postgr.es/m/2287835.1697464481@sss.pgh.pa.us
Dropping a temp table could entail TOAST table access to clean out
toasted catalog entries, such as large pg_constraint.conbin strings
for complex CHECK constraints. If we did that via ON COMMIT DROP,
we triggered the assertion in init_toast_snapshot(), because
there was no provision for setting up a snapshot for the drop
actions. Fix that.
(I assume here that the adjacent truncation actions for ON COMMIT
DELETE ROWS don't have a similar problem: it doesn't seem like
nontransactional truncations would need to touch any toasted fields.
If that proves wrong, we could refactor a bit to have the same
snapshot acquisition cover that too.)
The test case added here does not fail before v15, because that
assertion was added in 277692220 which was not back-patched.
However, the race condition the assertion warns of surely
exists further back, so back-patch to all supported branches.
Per report from Richard Guo.
Discussion: https://postgr.es/m/CAMbWs4-x26=_QxxgdJyNbiCDzvtr2WV5ZDso_v-CukKEe6cBZw@mail.gmail.com
This is a consequence of 4817da51f6 that has bumped up
max_worker_processes, where now the last worker started by the test
would be able to start by itself a parallel worker because there are
more slots available. This did not show up before as the number of
bgworkers reached exactly 8, as known as the previous limit, at the end
of the test.
Per report from buildfarm member crake, reproducible with
debug_parallel_query = regress in the same fashion as fd4d93d269.
mamba has detected a failure in the last test that should start a
bgworker while bypassing the role login check. The buildfarm did not
provide any information about its failure in the logs, but I suspect
that this is caused by an exhaustion of the max_worker_processes slots
set at 8 by default.
In "normal" test runs, the number of bgworkers running at this stage of
the test is already 7, so, if one of them spawns for example a parallel
worker all the slots would be taken, preventing the last worker of the
test to start.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/ZSyebsiub88pyJJO@paquier.xyz
This commit introduces trigger on login event, allowing to fire some actions
right on the user connection. This can be useful for logging or connection
check purposes as well as for some personalization of environment. Usage
details are described in the documentation included, but shortly usage is
the same as for other triggers: create function returning event_trigger and
then create event trigger on login event.
In order to prevent the connection time overhead when there are no triggers
the commit introduces pg_database.dathasloginevt flag, which indicates database
has active login triggers. This flag is set by CREATE/ALTER EVENT TRIGGER
command, and unset at connection time when no active triggers found.
Author: Konstantin Knizhnik, Mikhail Gribkov
Discussion: https://postgr.es/m/0d46d29f-4558-3af9-9c85-7774e14a7709%40postgrespro.ru
Reviewed-by: Pavel Stehule, Takayuki Tsunakawa, Greg Nancarrow, Ivan Panchenko
Reviewed-by: Daniel Gustafsson, Teodor Sigaev, Robert Haas, Andres Freund
Reviewed-by: Tom Lane, Andrey Sokolov, Zhihong Yu, Sergey Shinderuk
Reviewed-by: Gregory Stark, Nikita Malakhov, Ted Yu
Under interval_ops, some equal values are distinguishable. One such
pair is '24:00:00' and '1 day'. With that being so, btequalimage()
breaches the documented contract for the "equalimage" btree support
function. This can cause incorrect results from index-only scans.
Users should REINDEX any btree indexes having interval-type columns.
After updating, pg_amcheck will report an error for almost all such
indexes. This fix makes interval_ops simply omit the support function,
like numeric_ops does. Back-pack to v13, where btequalimage() first
appeared. In back branches, for the benefit of old catalog content,
btequalimage() code will return false for type "interval". Going
forward, back-branch initdb will include the catalog change.
Reviewed by Peter Geoghegan.
Discussion: https://postgr.es/m/20231011013317.22.nmisch@google.com
When COPYing into a partitioned table that does now permit the use of
table_multi_insert(), we could error out with
ERROR: could not read block NN in file "base/...": read only 0 of 8192 bytes
because BulkInsertState->next_free was not reset between partitions. This
problem occurred only when not able to use table_multi_insert(), as a
dedicated BulkInsertState for each partition is used in that case.
The bug was introduced in 00d1e02be2, but it was hard to hit at that point,
as commonly bulk relation extension is not used when not using
table_multi_insert(). It became more likely after 82a4edabd2, which expanded
the use of bulk extension.
To fix the bug, reset the bulk relation extension state in BulkInsertState in
ReleaseBulkInsertStatePin(). That was added (in b1ecb9b3fc) to tackle a very
similar issue. Obviously the name is not quite correct, but there might be
external callers, and bulk insert state needs to be reset in precisely in the
situations that ReleaseBulkInsertStatePin() already needed to be called.
Medium term the better fix likely is to disallow reusing BulkInsertState
across relations.
Add a test that, without the fix, reproduces #18130 in most
configurations. The test also catches the problem fixed in b1ecb9b3fc when
run with small shared_buffers.
Reported-by: Ivan Kolombet <enderstd@gmail.com>
Analyzed-by: Tom Lane <tgl@sss.pgh.pa.us>
Analyzed-by: Andres Freund <andres@anarazel.de>
Bug: #18130
Discussion: https://postgr.es/m/18130-7a86a7356a75209d%40postgresql.org
Discussion: https://postgr.es/m/257696.1695670946%40sss.pgh.pa.us
Backpatch: 16-
When converting a timestamp to/from with/without time zone, the SQL
Standard specifies an AT LOCAL variant of AT TIME ZONE which uses the
session's time zone. This includes three system functions able to do
the work in the same way as the existing flavors for AT TIME ZONE,
except that these need to be marked as stable as they depend on the
session's TimeZone GUC.
Bump catalog version.
Author: Vik Fearing
Reviewed-by: Laurenz Albe, Cary Huang, Michael Paquier
Discussion: https://postgr.es/m/8e25dec4-5667-c1a5-6581-167d710c2182@postgresfriends.org
This could only affect HASH partitioned tables with at least 2 partition
key columns.
If partition pruning was delayed until execution and the query contained
an IS NULL qual on one of the partitioned keys, and some subsequent
partitioned key was being compared to a non-Const, then this could result
in a crash due to the incorrect keyno being used to calculate the
stateidx for the expression evaluation code.
Here we fix this by properly skipping partitioned keys which have a
nullkey set. Effectively, this must be the same as what's going on
inside perform_pruning_base_step().
Sergei Glukhov also provided a patch, but that's not what's being used
here.
Reported-by: Sergei Glukhov
Reviewed-by: tender wang, Sergei Glukhov
Discussion: https://postgr.es/m/d05b26fa-af54-27e1-f693-6c31590802fa@postgrespro.ru
Backpatch-through: 11, where runtime partition pruning was added.
get_steps_using_prefix_recurse() incorrectly assumed that it could stop
recursive processing of the 'prefix' list when cur_keyno was one before
the step_lastkeyno. Since hash partition pruning can prune using IS
NULL quals, and these IS NULL quals are not present in the 'prefix'
list, then that logic could cause more levels of recursion than what is
needed and lead to there being no more items in the 'prefix' list to
process. This would manifest itself as a crash in some code that
expected the 'start' ListCell not to be NULL.
Here we adjust the logic so that instead of stopping recursion at 1 key
before the step_lastkeyno, we just look at the llast(prefix) item and
ensure we only recursively process up until just before whichever the last
key is. This effectively allows keys to be missing in the 'prefix' list.
This change does mean that step_lastkeyno is no longer needed, so we
remove that from the static functions. I also spent quite some time
reading this code and testing it to try to convince myself that there
are no other issues. That resulted in the irresistible temptation of
rewriting some comments, many of which were just not true or inconcise.
Reported-by: Sergei Glukhov
Reviewed-by: Sergei Glukhov, tender wang
Discussion: https://postgr.es/m/2f09ce72-315e-2a33-589a-8519ada8df61@postgrespro.ru
Backpatch-through: 11, where partition pruning was introduced.
This adds a new option called BGWORKER_BYPASS_ROLELOGINCHECK to the
flags available to BackgroundWorkerInitializeConnection() and
BackgroundWorkerInitializeConnectionByOid().
This gives the possibility to bgworkers to bypass the role login check,
making possible the use of a role that has no login rights while not
being a superuser. PostgresInit() gains a new flag called
INIT_PG_OVERRIDE_ROLE_LOGIN, taking advantage of the refactoring done in
4800a5dfb4.
Regression tests are added to worker_spi to check the behavior of this
new option with bgworkers.
Author: Bertrand Drouvot
Reviewed-by: Nathan Bossart, Michael Paquier, Bharath Rupireddy
Discussion: https://postgr.es/m/bcc36259-7850-4882-97ef-d6b905d2fc51@gmail.com
In commit 3fc6e2d7f, I (tgl) argued that we only need to check for
a constant-FALSE restriction clause when there's exactly one
restriction clause, on the grounds that const-folding would have
thrown away anything ANDed with a Const FALSE. That's true just after
const-folding has been applied, but subsequent processing such as
equivalence class expansion could result in cases where a Const FALSE
is ANDed with some other stuff. (Compare for instance joinrels.c's
restriction_is_constant_false.) Hence, tweak this logic to check all
the elements of the baserestrictinfo list, not just one; that's cheap
enough to not be worth worrying about.
There is one existing test case where this visibly improves the plan.
There would not be any savings in runtime, but the planner effort and
executor startup effort will be reduced, and anyway it's odd that
we can detect related cases but not this one.
Richard Guo (independently discovered by David Rowley)
Discussion: https://postgr.es/m/CAMbWs4_x3-CnVVrCboS1LkEhB5V+W7sLSCabsRiG+n7+5_kqbg@mail.gmail.com
While working on a8a968a82, I failed to consider that
cheapest_startup_path can be NULL when there is no non-parameterized
path in the pathlist. This is well documented in set_cheapest(), I just
failed to notice.
Here we adjust the code to just check if the RelOptInfo has a
cheapest_startup_path set before adding it to the startup_subpaths list.
Reported-by: Richard Guo
Author: Richard Guo
Discussion: https://postgr.es/m/CAMbWs49w3t03V69XhdCuw+GDwivny4uQUxrkVp6Gejaspt0wMQ@mail.gmail.com
Heikki Linnakangas
Michael Paquier
Amit Kapila
Masahiko Sawada
Alexander Korotkov
Tom Lane
Tomas Vondra
Peter Eisentraut
Bruce Momjian
Dean Rasheed
Noah Misch
Daniel Gustafsson
Jeff Davis
Andres Freund
David Rowley