Temporary WAL segments are created in pg_wal and named as xlogtemp.pid
before being renamed to the real deal when creating a new segment. If
an instance crashes after the temporary segment is created and before
the rename is done, then the server would finish with unremovable data.
After an instance crash, scan pg_wal and remove any such segments. With
repetitive unlucky crashes this would contribute to disk bloat and
presents risks of ENOSPC especially with max_wal_size close to the
maximum allowed.
Author: Michael Paquier
Reviewed-by: Yugo Nagata, Heikki Linnakangas
Discussion: https://postgr.es/m/20180514054955.GF1528@paquier.xyz
A critical failure in some of the end-of-recovery actions before the
end-of-recovery record is written can cause PostgreSQL to react
inconsistently with the rest of the cluster in the event of a crash
before the final record is written. Two such failures are for example
an error while processing a two-phase state files or when operating on
recovery.conf. With this commit, the failures are still considered
FATAL, but the write of the timeline history file is delayed as much as
possible so as the window between the moment the file is written and the
end-of-recovery record is generated gets minimized. This way, in the
event of a crash or a failure, the new timeline decided at promotion
will not seem taken by other nodes in the cluster. It is not really
possible to reduce to zero this window, hence one could still see
failures if a crash happens between the history file write and the
end-of-recovery record, so any future code should be careful when
adding new end-of-recovery actions. The original report from Magnus
Hagander mentioned a renamed recovery.conf as original end-of-recovery
failure which caused a timeline to be seen as taken but the subsequent
processing on the now-missing recovery.conf cause the startup process to
issue stop on FATAL, which at follow-up startup made the system
inconsistent because of on-disk changes which already happened.
Processing of two-phase state files still needs some work as corrupted
entries are simply ignored now. This is left as a future item and this
commit fixes the original complain.
Reported-by: Magnus Hagander
Author: Heikki Linnakangas
Reviewed-by: Alexander Korotkov, Michael Paquier, David Steele
Discussion: https://postgr.es/m/CABUevEz09XY2EevA2dLjPCY-C5UO4Hq=XxmXLmF6ipNFecbShQ@mail.gmail.com
If a standby crashes after promotion before having completed its first
post-recovery checkpoint, then the minimal recovery point which marks
the LSN position where the cluster is able to reach consistency may be
set to a position older than the first end-of-recovery checkpoint while
all the WAL available should be replayed. This leads to the instance
thinking that it contains inconsistent pages, causing a PANIC and a hard
instance crash even if all the WAL available has not been replayed for
certain sets of records replayed. When in crash recovery,
minRecoveryPoint is expected to always be set to InvalidXLogRecPtr,
which forces the recovery to replay all the WAL available, so this
commit makes sure that the local copy of minRecoveryPoint from the
control file is initialized properly and stays as it is while crash
recovery is performed. Once switching to archive recovery or if crash
recovery finishes, then the local copy minRecoveryPoint can be safely
updated.
Pavan Deolasee has reported and diagnosed the failure in the first
place, and the base fix idea to rely on the local copy of
minRecoveryPoint comes from Kyotaro Horiguchi, which has been expanded
into a full-fledged patch by me. The test included in this commit has
been written by Álvaro Herrera and Pavan Deolasee, which I have modified
to make it faster and more reliable with sleep phases.
Backpatch down to all supported versions where the bug appears, aka 9.3
which is where the end-of-recovery checkpoint is not run by the startup
process anymore. The test gets easily supported down to 10, still it
has been tested on all branches.
Reported-by: Pavan Deolasee
Diagnosed-by: Pavan Deolasee
Reviewed-by: Pavan Deolasee, Kyotaro Horiguchi
Author: Michael Paquier, Kyotaro Horiguchi, Pavan Deolasee, Álvaro
Herrera
Discussion: https://postgr.es/m/CABOikdPOewjNL=05K5CbNMxnNtXnQjhTx2F--4p4ruorCjukbA@mail.gmail.com
This has been visibly a forgotten spot in the first implementation of
wait events for I/O added by 249cf07, and what has been missing is a
fsync call for WAL segments which is a wrapper reacting on the value of
GUC wal_sync_method.
Reported-by: Konstantin Knizhnik
Author: Konstantin Knizhnik
Reviewed-by: Craig Ringer, Michael Paquier
Discussion: https://postgr.es/m/4a243897-0ad8-f471-aa40-242591f2476e@postgrespro.ru
System calls mixed up in error code paths are causing two issues which
several code paths have not correctly handled:
1) For write() calls, sometimes the system may return less bytes than
what has been written without errno being set. Some paths were careful
enough to consider that case, and assumed that errno should be set to
ENOSPC, other calls missed that.
2) errno generated by a system call is overwritten by other system calls
which may succeed once an error code path is taken, causing what is
reported to the user to be incorrect.
This patch uses the brute-force approach of correcting all those code
paths. Some refactoring could happen in the future, but this is let as
future work, which is not targeted for back-branches anyway.
Author: Michael Paquier
Reviewed-by: Ashutosh Sharma
Discussion: https://postgr.es/m/20180622061535.GD5215@paquier.xyz
If a continuation record is split so that its first half has already been
removed from the master, and is only present in pg_wal, and there is a
recycled WAL segment in the standby server that looks like it would
contain the second half, recovery would get stuck. The code in
XLogPageRead() incorrectly started streaming at the beginning of the
WAL record, even if we had already read the first page.
Backpatch to 9.4. In principle, older versions have the same problem, but
without replication slots, there was no straightforward mechanism to
prevent the master from recycling old WAL that was still needed by standby.
Without such a mechanism, I think it's reasonable to assume that there's
enough slack in how many old segments are kept around to not run into this,
or you have a WAL archive.
Reported by Jonathon Nelson. Analysis and patch by Kyotaro HORIGUCHI, with
some extra comments by me.
Discussion: https://www.postgresql.org/message-id/CACJqAM3xVz0JY1XFDKPP%2BJoJAjoGx%3DGNuOAshEDWCext7BFvCQ%40mail.gmail.com
The nextOid value is from the start of the checkpoint and may well be stale
compared to values from more recent XLOG_NEXTOID records. Previously, we
adopted it anyway, allowing the OID counter to go backwards during a crash.
While this should be harmless, it contributed to the severity of the bug
fixed in commit 0408e1ed5, by allowing duplicate TOAST OIDs to be assigned
immediately following a crash. Without this error, that issue would only
have arisen when TOAST objects just younger than a multiple of 2^32 OIDs
were deleted and then not vacuumed in time to avoid a conflict.
Pavan Deolasee
Discussion: https://postgr.es/m/CABOikdOgWT2hHkYG3Wwo2cyZJq2zfs1FH0FgX-=h4OLosXHf9w@mail.gmail.com
This reverts the backend sides of commit 1fde38beaa.
I have, at least for now, left the pg_verify_checksums tool in place, as
this tool can be very valuable without the rest of the patch as well,
and since it's a read-only tool that only runs when the cluster is down
it should be a lot safer.
Consolidate directory and file create permissions for tools which work
with the PG data directory by adding a new module (common/file_perm.c)
that contains variables (pg_file_create_mode, pg_dir_create_mode) and
constants to initialize them (0600 for files and 0700 for directories).
Convert mkdir() calls in the backend to MakePGDirectory() if the
original call used default permissions (always the case for regular PG
directories).
Add tests to make sure permissions in PGDATA are set correctly by the
tools which modify the PG data directory.
Authors: David Steele <david@pgmasters.net>,
Adam Brightwell <adam.brightwell@crunchydata.com>
Reviewed-By: Michael Paquier, with discussion amongst many others.
Discussion: https://postgr.es/m/ad346fe6-b23e-59f1-ecb7-0e08390ad629%40pgmasters.net
This makes it possible to turn checksums on in a live cluster, without
the previous need for dump/reload or logical replication (and to turn it
off).
Enabling checkusm starts a background process in the form of a
launcher/worker combination that goes through the entire database and
recalculates checksums on each and every page. Only when all pages have
been checksummed are they fully enabled in the cluster. Any failure of
the process will revert to checksums off and the process has to be
started.
This adds a new WAL record that indicates the state of checksums, so
the process works across replicated clusters.
Authors: Magnus Hagander and Daniel Gustafsson
Review: Tomas Vondra, Michael Banck, Heikki Linnakangas, Andrey Borodin
In the previous coding, skipped pages were mostly zeroes, but they still
had valid WAL page headers. That makes them very much less compressible
than an unbroken string of zeroes would be --- about 10X worse for bzip2
compression, for instance. We don't need those headers, so tweak the logic
so that we zero them out.
Chapman Flack, reviewed by Daniel Gustafsson
Discussion: https://postgr.es/m/579297F8.7020107@anastigmatix.net
Per the project style guide, details and hints should have leading
capitalization and end with a period. On the other hand, errcontext should
not be capitalized and should not end with a period. To support well
formatted error contexts in dblink, extend dblink_res_error() to take a
format+arguments rather than a hardcoded string.
Daniel Gustafsson
Discussion: https://postgr.es/m/B3C002C8-21A0-4F53-A06E-8CAB29FCF295@yesql.se
Previously an assertion failure occurred when pg_stop_backup() for
non-exclusive backup was aborted while it's waiting for WAL files to
be archived. This assertion failure happened in do_pg_abort_backup()
which was called when a non-exclusive backup was canceled.
do_pg_abort_backup() assumes that there is at least one non-exclusive
backup running when it's called. But pg_stop_backup() can be canceled
even after it marks the end of non-exclusive backup (e.g.,
during waiting for WAL archiving). This broke the assumption that
do_pg_abort_backup() relies on, and which caused an assertion failure.
This commit changes do_pg_abort_backup() so that it does nothing
when non-exclusive backup has been already marked as completed.
That is, the asssumption is also changed, and do_pg_abort_backup()
now can handle even the case where it's called when there is
no running backup.
Backpatch to 9.6 where SQL-callable non-exclusive backup was added.
Author: Masahiko Sawada and Michael Paquier
Reviewed-By: Robert Haas and Fujii Masao
Discussion: https://www.postgresql.org/message-id/CAD21AoD2L1Fu2c==gnVASMyFAAaq3y-AQ2uEVj-zTCGFFjvmDg@mail.gmail.com
do_pg_start_backup() expects its callers to pass in an open DIR pointer
for the pg_tblspc directory, but there's no apparent advantage in that.
It complicates the callers without adding any flexibility, and there's no
robustness advantage, since we surely have to be prepared for errors during
the scan of pg_tblspc anyway. In fact, by holding an extra kernel resource
during operations like the preliminary checkpoint, we might be making
things a fraction more failure-prone not less. Hence, remove that argument
and open the directory just for the duration of the actual scan.
Discussion: https://postgr.es/m/28752.1512413887@sss.pgh.pa.us
This patch fixes a couple of low-probability bugs that could lead to
reporting an irrelevant errno value (and hence possibly a wrong SQLSTATE)
concerning directory-open or file-open failures. It also fixes places
where we took shortcuts in reporting such errors, either by using elog
instead of ereport or by using ereport but forgetting to specify an
errcode. And it eliminates a lot of just plain redundant error-handling
code.
In service of all this, export fd.c's formerly-static function
ReadDirExtended, so that external callers can make use of the coding
pattern
dir = AllocateDir(path);
while ((de = ReadDirExtended(dir, path, LOG)) != NULL)
if they'd like to treat directory-open failures as mere LOG conditions
rather than errors. Also fix FreeDir to be a no-op if we reach it
with dir == NULL, as such a coding pattern would cause.
Then, remove code at many call sites that was throwing an error or log
message for AllocateDir failure, as ReadDir or ReadDirExtended can handle
that job just fine. Aside from being a net code savings, this gets rid of
a lot of not-quite-up-to-snuff reports, as mentioned above. (In some
places these changes result in replacing a custom error message such as
"could not open tablespace directory" with more generic wording "could not
open directory", but it was agreed that the custom wording buys little as
long as we report the directory name.) In some other call sites where we
can't just remove code, change the error reports to be fully
project-style-compliant.
Also reorder code in restoreTwoPhaseData that was acquiring a lock
between AllocateDir and ReadDir; in the unlikely but surely not
impossible case that LWLockAcquire changes errno, AllocateDir failures
would be misreported. There is no great value in opening the directory
before acquiring TwoPhaseStateLock, so just do it in the other order.
Also fix CheckXLogRemoved to guarantee that it preserves errno,
as quite a number of call sites are implicitly assuming. (Again,
it's unlikely but I think not impossible that errno could change
during a SpinLockAcquire. If so, this function was broken for its
own purposes as well as breaking callers.)
And change a few places that were using not-per-project-style messages,
such as "could not read directory" when "could not open directory" is
more correct.
Back-patch the exporting of ReadDirExtended, in case we have occasion
to back-patch some fix that makes use of it; it's not needed right now
but surely making it global is pretty harmless. Also back-patch the
restoreTwoPhaseData and CheckXLogRemoved fixes. The rest of this is
essentially cosmetic and need not get back-patched.
Michael Paquier, with a bit of additional work by me
Discussion: https://postgr.es/m/CAB7nPqRpOCxjiirHmebEFhXVTK7V5Jvw4bz82p7Oimtsm3TyZA@mail.gmail.com
The lower case spellings are C and C++ standard and are used in most
parts of the PostgreSQL sources. The upper case spellings are only used
in some files/modules. So standardize on the standard spellings.
The APIs for ICU, Perl, and Windows define their own TRUE and FALSE, so
those are left as is when using those APIs.
In code comments, we use the lower-case spelling for the C concepts and
keep the upper-case spelling for the SQL concepts.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Previously server reserved WAL for last two checkpoints,
which used too much disk space for small servers.
Bumps PG_CONTROL_VERSION
Author: Simon Riggs <simon@2ndQuadrant.com>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
The file handling functions from fd.c were called with a diverse mix of
notations for the file permissions when they were opening new files.
Almost all files created by the server should have the same permissions
set. So change the API so that e.g. OpenTransientFile() automatically
uses the standard permissions set, and OpenTransientFilePerm() is a new
function that takes an explicit permissions set for the few cases where
it is needed. This also saves an unnecessary argument for call sites
that are just opening an existing file.
While we're reviewing these APIs, get rid of the FileName typedef and
use the standard const char * for the file name and mode_t for the file
mode. This makes these functions match other file handling functions
and removes an unnecessary layer of mysteriousness. We can also get rid
of a few casts that way.
Author: David Steele <david@pgmasters.net>
For performance reasons a larger segment size than the default 16MB
can be useful. A larger segment size has two main benefits: Firstly,
in setups using archiving, it makes it easier to write scripts that
can keep up with higher amounts of WAL, secondly, the WAL has to be
written and synced to disk less frequently.
But at the same time large segment size are disadvantageous for
smaller databases. So far the segment size had to be configured at
compile time, often making it unrealistic to choose one fitting to a
particularly load. Therefore change it to a initdb time setting.
This includes a breaking changes to the xlogreader.h API, which now
requires the current segment size to be configured. For that and
similar reasons a number of binaries had to be taught how to recognize
the current segment size.
Author: Beena Emerson, editorialized by Andres Freund
Reviewed-By: Andres Freund, David Steele, Kuntal Ghosh, Michael
Paquier, Peter Eisentraut, Robert Hass, Tushar Ahuja
Discussion: https://postgr.es/m/CAOG9ApEAcQ--1ieKbhFzXSQPw_YLmepaa4hNdnY5+ZULpt81Mw@mail.gmail.com
The bug was caused by not re-reading the control file during crash
recovery restarts, which lead to an attempt to pfree() shared memory
contents. The fix is to re-read the control file, which seems good
anyway.
It's unclear as of this moment, whether we want to keep the
refactoring introduced in the commit referenced above, or come up with
an alternative approach. But fixing the bug in the mean time seems
like a good idea regardless.
A followup commit will introduce regression test coverage for crash
restarts.
Reported-By: Tom Lane
Discussion: https://postgr.es/m/14134.1505572349@sss.pgh.pa.us
Previously we read the control file in multiple places. But soon the
segment size will be configurable and stored in the control file, and
that needs to be available earlier than it currently is needed.
Instead of adding yet another place where it's read, refactor things
so there's a single processing of the control file during startup (in
EXEC_BACKEND that's every individual backend's startup).
Author: Andres Freund
Discussion: http://postgr.es/m/20170913092828.aozd3gvvmw67gmyc@alap3.anarazel.de
Previously, it had no effect. Now, if archive_mode=always, it will
work, and if not, you'll get a warning.
Masahiko Sawada, Michael Paquier, and Robert Haas. The patch as
submitted also changed the behavior so that we would write and remove
history files on standbys, but that seems like material for a separate
patch to me.
Discussion: http://postgr.es/m/CAD21AoC2Xw6M=ZJyejq_9d_iDkReC_=rpvQRw5QsyzKQdfYpkw@mail.gmail.com
When pg_control was first designed, sizeof(ControlFileData) was small
enough that a comment seemed like plenty to document the assumption that
it'd fit into one disk sector. Now it's nearly 300 bytes, raising the
possibility that somebody would carelessly add enough stuff to create
a problem. Let's add a StaticAssertStmt() to ensure that the situation
doesn't pass unnoticed if it ever occurs.
While at it, rename PG_CONTROL_SIZE to PG_CONTROL_FILE_SIZE to make it
clearer what that symbol means, and convert the existing runtime
comparisons of sizeof(ControlFileData) vs. PG_CONTROL_FILE_SIZE to be
static asserts --- we didn't have that technology when this code was
first written.
Discussion: https://postgr.es/m/9192.1500490591@sss.pgh.pa.us
When promoting a standby just after a XLOG_SWITCH record was replayed,
and next segment(s) are already are locally available (via walsender,
restore_command + trigger/recovery target), that segment could
accidentally be recycled onto the past of the new timeline. Later
checkpointer would create a .ready file for it, assuming there was an
error during creation, and it would get archived. That causes trouble
if another standby is later brought up from a basebackup from before
the timeline creation, because it would try to read the
segment, because XLogFileReadAnyTLI just tries all possible timelines,
which doesn't have valid contents. Thus replay would fail.
The problem, if already occurred, can be fixed by removing the segment
and/or having restore_command filter it out.
The reason for the creation of such "phantom" segments was, that after
an XLOG_SWITCH record the EndOfLog variable points to the beginning of
the next segment, and RemoveXlogFile() used XLByteToPrevSeg().
Normally RemoveXlogFile() doing so is harmless, because the last
segment will still exist preventing InstallXLogFileSegment() from
causing harm, but just after promotion there's no previous segment on
the new timeline.
Fix that by using XLByteToSeg() instead of XLByteToPrevSeg().
Author: Andres Freund
Reported-By: Greg Burek
Discussion: https://postgr.es/m/20170619073026.zcwpe6mydsaz5ygd@alap3.anarazel.de
Backpatch: 9.2-, bug older than all supported versions
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
When the checkpointer writes the shutdown checkpoint, it checks
afterwards whether any WAL has been written since it started and
throws a PANIC if so. At that point, only walsenders are still
active, so one might think this could not happen, but walsenders can
also generate WAL, for instance in BASE_BACKUP and logical decoding
related commands (e.g. via hint bits). So they can trigger this panic
if such a command is run while the shutdown checkpoint is being
written.
To fix this, divide the walsender shutdown into two phases. First,
checkpointer, itself triggered by postmaster, sends a
PROCSIG_WALSND_INIT_STOPPING signal to all walsenders. If the backend
is idle or runs an SQL query this causes the backend to shutdown, if
logical replication is in progress all existing WAL records are
processed followed by a shutdown. Otherwise this causes the walsender
to switch to the "stopping" state. In this state, the walsender will
reject any further replication commands. The checkpointer begins the
shutdown checkpoint once all walsenders are confirmed as
stopping. When the shutdown checkpoint finishes, the postmaster sends
us SIGUSR2. This instructs walsender to send any outstanding WAL,
including the shutdown checkpoint record, wait for it to be replicated
to the standby, and then exit.
Author: Andres Freund, based on an earlier patch by Michael Paquier
Reported-By: Fujii Masao, Andres Freund
Reviewed-By: Michael Paquier
Discussion: https://postgr.es/m/20170602002912.tqlwn4gymzlxpvs2@alap3.anarazel.de
Backpatch: 9.4, where logical decoding was introduced
This reverts commit 086221cf6b, which
was made to master only.
The approach implemented in the above commit has some issues. While
those could easily be fixed incrementally, doing so would make
backpatching considerably harder, so instead first revert this patch.
Discussion: https://postgr.es/m/20170602002912.tqlwn4gymzlxpvs2@alap3.anarazel.de
When the checkpointer writes the shutdown checkpoint, it checks
afterwards whether any WAL has been written since it started and throws
a PANIC if so. At that point, only walsenders are still active, so one
might think this could not happen, but walsenders can also generate WAL,
for instance in BASE_BACKUP and certain variants of
CREATE_REPLICATION_SLOT. So they can trigger this panic if such a
command is run while the shutdown checkpoint is being written.
To fix this, divide the walsender shutdown into two phases. First, the
postmaster sends a SIGUSR2 signal to all walsenders. The walsenders
then put themselves into the "stopping" state. In this state, they
reject any new commands. (For simplicity, we reject all new commands,
so that in the future we do not have to track meticulously which
commands might generate WAL.) The checkpointer waits for all walsenders
to reach this state before proceeding with the shutdown checkpoint.
After the shutdown checkpoint is done, the postmaster sends
SIGINT (previously unused) to the walsenders. This triggers the
existing shutdown behavior of sending out the shutdown checkpoint record
and then terminating.
Author: Michael Paquier <michael.paquier@gmail.com>
Reported-by: Fujii Masao <masao.fujii@gmail.com>
Previously they were defined using multiples of XLogSegSize.
Remove GUC_UNIT_XSEGS. Introduce GUC_UNIT_MB
Extracted from patch series on XLogSegSize infrastructure.
Beena Emerson
2PC state info held in shmem at PREPARE, then cleaned at COMMIT PREPARED/ABORT PREPARED,
avoiding writing/fsyncing any state information to disk in the normal path, greatly enhancing replay speed.
Prepared transactions that live past one checkpoint redo horizon will be written to disk as now.
Similar conceptually to 978b2f65aa and building upon
the infrastructure created by that commit.
Authors, in equal measure: Stas Kelvich, Nikhil Sontakke and Michael Paquier
Discussion: https://postgr.es/m/CAMGcDxf8Bn9ZPBBJZba9wiyQq-Qk5uqq=VjoMnRnW5s+fKST3w@mail.gmail.com
We were assigning values near 255 through "char *" pointers. On machines
where char is signed, that's not entirely kosher, and it's reasonable
for compilers to warn about it.
A better solution would be to change the pointer type to "unsigned char *",
but that would be vastly more invasive. For the moment, let's just apply
this simple backpatchable solution.
Aleksander Alekseev
Discussion: https://postgr.es/m/20170220141239.GD12278@e733.localdomain
Discussion: https://postgr.es/m/2839.1490714708@sss.pgh.pa.us
If file was created/deleted just before powerloss it's possible that
file system will miss that. To prevent it, call fsync() where creating/
unlinkg file is critical.
Author: Michael Paquier
Reviewed-by: Ashutosh Bapat, Takayuki Tsunakawa, me
Assert-enabled build crashes but without asserts it works by wrong way:
it may not reset forcing full page write and preventing from starting
exclusive backup with the same name as cancelled.
Patch replaces pair of booleans
nonexclusive_backup_running/exclusive_backup_running to single enum to
correctly describe backup state.
Backpatch to 9.6 where bug was introduced
Reported-by: David Steele
Authors: Michael Paquier, David Steele
Reviewed-by: Anastasia Lubennikova
https://commitfest.postgresql.org/13/1068/
This provides infrastructure for looking up arbitrary, user-supplied
XIDs without a risk of scary-looking failures from within the clog
module. Normally, the oldest XID that can be safely looked up in CLOG
is the same as the oldest XID that can reused without causing
wraparound, and the latter is already tracked. However, while
truncation is in progress, the values are different, so we must
keep track of them separately.
Craig Ringer, reviewed by Simon Riggs and by me.
Discussion: http://postgr.es/m/CAMsr+YHQiWNEi0daCTboS40T+V5s_+dst3PYv_8v2wNVH+Xx4g@mail.gmail.com
Adds write_lag, flush_lag and replay_lag cols to pg_stat_replication.
Implements a lag tracker module that reports the lag times based upon
measurements of the time taken for recent WAL to be written, flushed and
replayed and for the sender to hear about it. These times
represent the commit lag that was (or would have been) introduced by each
synchronous commit level, if the remote server was configured as a
synchronous standby. For an asynchronous standby, the replay_lag column
approximates the delay before recent transactions became visible to queries.
If the standby server has entirely caught up with the sending server and
there is no more WAL activity, the most recently measured lag times will
continue to be displayed for a short time and then show NULL.
Physical replication lag tracking is automatic. Logical replication tracking
is possible but is the responsibility of the logical decoding plugin.
Tracking is a private module operating within each walsender individually,
with values reported to shared memory. Module not used outside of walsender.
Design and code is good enough now to commit - kudos to the author.
In many ways a difficult topic, with important and subtle behaviour so this
shoudl be expected to generate discussion and multiple open items: Test now!
Author: Thomas Munro, following designs by Fujii Masao and Simon Riggs
Review: Simon Riggs, Ian Barwick and Craig Ringer
Internally, we have supported the option to either wait for all of the
WAL associated with a backup to be archived, or to return immediately.
This option is useful to users of pg_stop_backup() as well, when they
are reading the stop backup record position and checking that the WAL
they need has been archived independently.
This patch adds an additional, optional, argument to pg_stop_backup()
which allows the user to indicate if they wish to wait for the WAL to be
archived or not. The default matches current behavior, which is to
wait.
Author: David Steele, with some minor changes, doc updates by me.
Reviewed by: Takayuki Tsunakawa, Fujii Masao
Discussion: https://postgr.es/m/758e3fd1-45b4-5e28-75cd-e9e7f93a4c02@pgmasters.net
Previous commits, notably 53be0b1add and
6f3bd98ebf, made it possible to see from
pg_stat_activity when a backend was stuck waiting for another backend,
but it's also fairly common for a backend to be stuck waiting for an
I/O. Add wait events for those operations, too.
Rushabh Lathia, with further hacking by me. Reviewed and tested by
Michael Paquier, Amit Kapila, Rajkumar Raghuwanshi, and Rahila Syed.
Discussion: http://postgr.es/m/CAGPqQf0LsYHXREPAZqYGVkDqHSyjf=KsD=k0GTVPAuzyThh-VQ@mail.gmail.com
The original messaging design, introduced in commit 068cfadf9, seems too
chatty now that some time has elapsed since the bug fix; most installations
will be in good shape and don't really need a reminder about this on every
postmaster start.
Hence, arrange to suppress the "wraparound protections are now enabled"
message during startup (specifically, during the TrimMultiXact() call).
The message will still appear if protection becomes effective at some
later point.
Discussion: https://postgr.es/m/17211.1489189214@sss.pgh.pa.us
This introduces a new generic SASL authentication method, similar to the
GSS and SSPI methods. The server first tells the client which SASL
authentication mechanism to use, and then the mechanism-specific SASL
messages are exchanged in AuthenticationSASLcontinue and PasswordMessage
messages. Only SCRAM-SHA-256 is supported at the moment, but this allows
adding more SASL mechanisms in the future, without changing the overall
protocol.
Support for channel binding, aka SCRAM-SHA-256-PLUS is left for later.
The SASLPrep algorithm, for pre-processing the password, is not yet
implemented. That could cause trouble, if you use a password with
non-ASCII characters, and a client library that does implement SASLprep.
That will hopefully be added later.
Authorization identities, as specified in the SCRAM-SHA-256 specification,
are ignored. SET SESSION AUTHORIZATION provides more or less the same
functionality, anyway.
If a user doesn't exist, perform a "mock" authentication, by constructing
an authentic-looking challenge on the fly. The challenge is derived from
a new system-wide random value, "mock authentication nonce", which is
created at initdb, and stored in the control file. We go through these
motions, in order to not give away the information on whether the user
exists, to unauthenticated users.
Bumps PG_CONTROL_VERSION, because of the new field in control file.
Patch by Michael Paquier and Heikki Linnakangas, reviewed at different
stages by Robert Haas, Stephen Frost, David Steele, Aleksander Alekseev,
and many others.
Discussion: https://www.postgresql.org/message-id/CAB7nPqRbR3GmFYdedCAhzukfKrgBLTLtMvENOmPrVWREsZkF8g%40mail.gmail.com
Discussion: https://www.postgresql.org/message-id/CAB7nPqSMXU35g%3DW9X74HVeQp0uvgJxvYOuA4A-A3M%2B0wfEBv-w%40mail.gmail.com
Discussion: https://www.postgresql.org/message-id/55192AFE.6080106@iki.fi
Twiddle the replication-related code so that its timestamp variables
are declared TimestampTz, rather than the uninformative "int64" that
was previously used for meant-to-be-always-integer timestamps.
This resolves the int64-vs-TimestampTz declaration inconsistencies
introduced by commit 7c030783a, though in the opposite direction to
what was originally suggested.
This required including datatype/timestamp.h in a couple more places
than before. I decided it would be a good idea to slim down that
header by not having it pull in <float.h> etc, as those headers are
no longer at all relevant to its purpose. Unsurprisingly, a small number
of .c files turn out to have been depending on those inclusions, so add
them back in the .c files as needed.
Discussion: https://postgr.es/m/26788.1487455319@sss.pgh.pa.us
Discussion: https://postgr.es/m/27694.1487456324@sss.pgh.pa.us
We don't need it any more.
pg_controldata continues to report that date/time type storage is
"64-bit integers", but that's now a hard-wired behavior not something
it sees in the data. This avoids breaking pg_upgrade, and perhaps other
utilities that inspect pg_control this way. Ditto for pg_resetwal.
I chose to remove the "bigint_timestamps" output column of
pg_control_init(), though, as that function hasn't been around long
and probably doesn't have ossified users.
Discussion: https://postgr.es/m/26788.1487455319@sss.pgh.pa.us
Commit f82ec32ac3 renamed the pg_xlog
directory to pg_wal. To make things consistent, and because "xlog" is
terrible terminology for either "transaction log" or "write-ahead log"
rename all SQL-callable functions that contain "xlog" in the name to
instead contain "wal". (Note that this may pose an upgrade hazard for
some users.)
Similarly, rename the xlog_position argument of the functions that
create slots to be called wal_position.
Discussion: https://www.postgresql.org/message-id/CA+Tgmob=YmA=H3DbW1YuOXnFVgBheRmyDkWcD9M8f=5bGWYEoQ@mail.gmail.com
When the new GUC wal_consistency_checking is set to a non-empty value,
it triggers recording of additional full-page images, which are
compared on the standby against the results of applying the WAL record
(without regard to those full-page images). Allowable differences
such as hints are masked out, and the resulting pages are compared;
any difference results in a FATAL error on the standby.
Kuntal Ghosh, based on earlier patches by Michael Paquier and Heikki
Linnakangas. Extensively reviewed and revised by Michael Paquier and
by me, with additional reviews and comments from Amit Kapila, Álvaro
Herrera, Simon Riggs, and Peter Eisentraut.
Previously multiple sessions could execute pg_start_backup() and
pg_stop_backup() to start and stop an exclusive backup at the same time.
This could trigger the assertion failure of
"FailedAssertion("!(XLogCtl->Insert.exclusiveBackup)".
This happend because, even while pg_start_backup() was starting
an exclusive backup, other session could run pg_stop_backup()
concurrently and mark the backup as not-in-progress unconditionally.
This patch introduces ExclusiveBackupState indicating the state of
an exclusive backup. This state is used to ensure that there is only
one session running pg_start_backup() or pg_stop_backup() at
the same time, to avoid the assertion failure.
Back-patch to all supported versions.
Author: Michael Paquier
Reviewed-By: Kyotaro Horiguchi and me
Reported-By: Andreas Seltenreich
Discussion: <87mvktojme.fsf@credativ.de>
Some background activity (like checkpoints, archive timeout, standby
snapshots) is not supposed to happen on an idle system. Unfortunately
so far it was not easy to determine when a system is idle, which
defeated some of the attempts to avoid redundant activity on an idle
system.
To make that easier, allow to make individual WAL insertions as not
being "important". By checking whether any important activity happened
since the last time an activity was performed, it now is easy to check
whether some action needs to be repeated.
Use the new facility for checkpoints, archive timeout and standby
snapshots.
The lack of a facility causes some issues in older releases, but in my
opinion the consequences (superflous checkpoints / archived segments)
aren't grave enough to warrant backpatching.
Author: Michael Paquier, editorialized by Andres Freund
Reviewed-By: Andres Freund, David Steele, Amit Kapila, Kyotaro HORIGUCHI
Bug: #13685
Discussion:
https://www.postgresql.org/message-id/20151016203031.3019.72930@wrigleys.postgresql.orghttps://www.postgresql.org/message-id/CAB7nPqQcPqxEM3S735Bd2RzApNqSNJVietAC=6kfkYv_45dKwA@mail.gmail.com
Backpatch: -
array_base and array_stride were added so that we could identify the
offset of an LWLock within a tranche, but this facility is only very
marginally used apart from the main tranche. So, give every lock in
the main tranche its own tranche ID and get rid of array_base,
array_stride, and all that's attached. For debugging facilities
(Trace_lwlocks and LWLOCK_STATS) print the pointer address of the
LWLock using %p instead of the offset. This is arguably more useful,
and certainly a lot cheaper. Drop the offset-within-tranche from
the information reported to dtrace and from one can't-happen message
inside lwlock.c.
The main user-visible impact of this change is that pg_stat_activity
will now report all waits for LWLocks as "LWLock" rather than
reporting some as "LWLockTranche" and others as "LWLockNamed".
The main motivation for this change is that the need to specify an
array_base and an array_stride is awkward for parallel query. There
is only a very limited supply of tranche IDs so we can't just keep
allocating new ones, and if we try to use the same tranche IDs every
time then we run into trouble when multiple parallel contexts are
use simultaneously. So if we didn't get rid of this mechanism we'd
have to make it even more complicated. By simplifying it in this
way, we instead reduce the size of the generated code for lwlock.c
by about 5%.
Discussion: http://postgr.es/m/CA+TgmoYsFn6NUW1x0AZtupJGUAs1UDY4dJtCN47_Q6D0sP80PA@mail.gmail.com
Instead of confusingly stating platform-dependent defaults for these
parameters in the comments in postgresql.conf.sample (with the main
entry being a lie on Linux), teach initdb to install the correct
platform-dependent value in postgresql.conf, similarly to the way
we handle other platform-dependent defaults. This won't do anything
for existing 9.6 installations, but since it's effectively only a
documentation improvement, that seems OK.
Since this requires initdb to have access to the default values,
move the #define's for those to pg_config_manual.h; the original
placement in bufmgr.h is unworkable because that file can't be
included by frontend programs.
Adjust the default value for wal_writer_flush_after so that it is 1MB
regardless of XLOG_BLCKSZ, conforming to what is stated in both the
SGML docs and postgresql.conf. (We could alternatively make it scale
with XLOG_BLCKSZ, but I'm not sure I see the point.)
Copy-edit related SGML documentation.
Fabien Coelho and Tom Lane, per a gripe from Tomas Vondra.
Discussion: <30ebc6e3-8358-09cf-44a8-578252938424@2ndquadrant.com>
A new thing also called a "barrier" is proposed, but whether we decide
to take that patch or not, this file seems to have outlived its
usefulness.
Thomas Munro
Generally, WAL resource managers are only supposed to examine the
top 4 bits of a WAL record's xl_info; the rest are reserved for
the WAL mechanism itself. A few places were not consistent about
doing this with respect to XLOG_CHECKPOINT and XLOG_SWITCH records.
There's no bug currently, since no additional bits ever get set in
these specific record types, but that might not be true forever.
Let's follow the generic coding rule here too.
Michael Paquier
If a restartpoint flushed no dirty buffers, it could fail to update
the minimum recovery point, leading to a minimum recovery point prior
to the starting REDO location. perform_base_backup() would interpret
that as meaning that no WAL files at all needed to be included in the
backup, failing an internal sanity check. To fix, have restartpoints
always update the minimum recovery point to just after the checkpoint
record itself, so that the file (or files) containing the checkpoint
record will always be included in the backup.
Code by Amit Kapila, per a design suggestion by me, with some
additional work on the code comment by me. Test case by Michael
Paquier. Report by Kyotaro Horiguchi.
"xlog" is not a particularly clear abbreviation for "write-ahead log",
and it sometimes confuses users into believe that the contents of the
"pg_xlog" directory are not critical data, leading to unpleasant
consequences. So, rename the directory to "pg_wal".
This patch modifies pg_upgrade and pg_basebackup to understand both
the old and new directory layouts; the former is necessary given the
purpose of the tool, while the latter merely avoids an unnecessary
backward-compatibility break.
We may wish to consider renaming other programs, switches, and
functions which still use the old "xlog" naming to also refer to
"wal". However, that's still under discussion, so let's do just this
much for now.
Discussion: CAB7nPqTeC-8+zux8_-4ZD46V7YPwooeFxgndfsq5Rg8ibLVm1A@mail.gmail.com
Michael Paquier
WaitLatch, WaitLatchOrSocket, and WaitEventSetWait now taken an
additional wait_event_info parameter; legal values are defined in
pgstat.h. This makes it possible to uniquely identify every point in
the core code where we are waiting for a latch; extensions can pass
WAIT_EXTENSION.
Because latches were the major wait primitive not previously covered
by this patch, it is now possible to see information in
pg_stat_activity on a large number of important wait events not
previously addressed, such as ClientRead, ClientWrite, and SyncRep.
Unfortunately, many of the wait events added by this patch will fail
to appear in pg_stat_activity because they're only used in background
processes which don't currently appear in pg_stat_activity. We should
fix this either by creating a separate view for such information, or
else by deciding to include them in pg_stat_activity after all.
Michael Paquier and Robert Haas, reviewed by Alexander Korotkov and
Thomas Munro.
Move the updating of the control file to "in production" status until
the point where WAL writes are allowed. Before, there could be a
significant gap between the control file update and write transactions
actually being allowed. This makes it more reliable to use the control
status to verify the end of a promotion.
From: Michael Paquier <michael.paquier@gmail.com>
This can't really work because standby_mode expects there to be more
WAL arriving, which there will not ever be because there's no WAL
receiver process to fetch it. Moreover, if standby_mode is on then
hot standby might also be turned on, causing even more strangeness
because that expects read-only sessions to be executing in parallel.
Bernd Helmle reported a case where btree_xlog_delete_get_latestRemovedXid
got confused, but rather than band-aiding individual problems it seems
best to prevent getting anywhere near this state in the first place.
Back-patch to all supported branches.
In passing, also fix some omissions of errcodes in other ereport's in
readRecoveryCommandFile().
Michael Paquier (errcode hacking by me)
Discussion: <00F0B2CEF6D0CEF8A90119D4@eje.credativ.lan>
I found that half a dozen (nearly 5%) of our AllocSetContextCreate calls
had typos in the context-sizing parameters. While none of these led to
especially significant problems, they did create minor inefficiencies,
and it's now clear that expecting people to copy-and-paste those calls
accurately is not a great idea. Let's reduce the risk of future errors
by introducing single macros that encapsulate the common use-cases.
Three such macros are enough to cover all but two special-purpose contexts;
those two calls can be left as-is, I think.
While this patch doesn't in itself improve matters for third-party
extensions, it doesn't break anything for them either, and they can
gradually adopt the simplified notation over time.
In passing, change TopMemoryContext to use the default allocation
parameters. Formerly it could only be extended 8K at a time. That was
probably reasonable when this code was written; but nowadays we create
many more contexts than we did then, so that it's not unusual to have a
couple hundred K in TopMemoryContext, even without considering various
dubious code that sticks other things there. There seems no good reason
not to let it use growing blocks like most other contexts.
Back-patch to 9.6, mostly because that's still close enough to HEAD that
it's easy to do so, and keeping the branches in sync can be expected to
avoid some future back-patching pain. The bugs fixed by these changes
don't seem to be significant enough to justify fixing them further back.
Discussion: <21072.1472321324@sss.pgh.pa.us>
On a standby, ThisTimelineID is always 0, so we would generate a
filename in timeline 0 even for other timelines. Instead, use starttli
which we have retreived from the controlfile.
Report by: Francesco Canovai in bug #14230
Author: Marco Nenciarini
Reviewed by: Michael Paquier and Amit Kapila
Previously non-exclusive backups had to be done using the replication protocol
and pg_basebackup. With this commit it's now possible to make them using
pg_start_backup/pg_stop_backup as well, as long as the backup program can
maintain a persistent connection to the database.
Doing this, backup_label and tablespace_map are returned as results from
pg_stop_backup() instead of being written to the data directory. This makes
the server safe from a crash during an ongoing backup, which can be a problem
with exclusive backups.
The old syntax of the functions remain and work exactly as before, but since the
new syntax is safer this should eventually be deprecated and removed.
Only reference documentation is included. The main section on backup still needs
to be rewritten to cover this, but since that is already scheduled for a separate
large rewrite, it's not included in this patch.
Reviewed by David Steele and Amit Kapila
In this mode, the master waits for the transaction to be applied on
the remote side, not just written to disk. That means that you can
count on a transaction started on the standby to see all commits
previously acknowledged by the master.
To make this work, the standby sends a reply after replaying each
commit record generated with synchronous_commit >= 'remote_apply'.
This introduces a small inefficiency: the extra replies will be sent
even by standbys that aren't the current synchronous standby. But
previously-existing synchronous_commit levels make no attempt at all
to optimize which replies are sent based on what the primary cares
about, so this is no worse, and at least avoids any extra replies for
people not using the feature at all.
Thomas Munro, reviewed by Michael Paquier and by me. Some additional
tweaks by me.
The distinction between "archive" and "hot_standby" existed only because
at the time "hot_standby" was added, there was some uncertainty about
stability. This is now a long time ago. We would like to move forward
with simplifying the replication configuration, but this distinction is
in the way, because a primary server cannot tell (without asking a
standby or predicting the future) which one of these would be the
appropriate level.
Pick a new name for the combined setting to make it clearer that it
covers all (non-logical) backup and replication uses. The old values
are still accepted but are converted internally.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: David Steele <david@pgmasters.net>
Michael Paquier
Alvaro Herrera
Andrew Dunstan
Magnus Hagander
Peter Eisentraut
Heikki Linnakangas
Tom Lane
Stephen Frost
Robert Haas
Simon Riggs
Bruce Momjian
Fujii Masao
Andres Freund
Teodor Sigaev