btree, hash, and bloom indexes all set up their metapages in standard
format (that is, with pd_lower and pd_upper correctly delimiting the
unused area); but they mostly didn't inform the xlog routines of this.
When calling log_newpage[_buffer], this is bad because it loses the
opportunity to compress unused data out of the WAL record. When
calling XLogRegisterBuffer, it's not such a performance problem because
all of these call sites also use REGBUF_WILL_INIT, preventing an FPI
image from being written. But it's still a good idea to provide the
flag when relevant, because that aids WAL consistency checking.
This completes the project of getting all the in-core index AMs to
handle their metapage WAL operations similarly.
Amit Kapila, reviewed by Michael Paquier
Discussion: https://postgr.es/m/0d273805-0e9e-ec1a-cb84-d4da400b8f85@lab.ntt.co.jp
This was intended as infrastructure for weakening VACUUM's locking
requirements, similar to what was done for btree indexes in commit
2ed5b87f96. However, for hash indexes,
it seems that the improvements which are possible are actually
extremely marginal. Furthermore, performing the LSN cross-check will
end up skipping cleanup far more often than is necessary; we only care
about page modifications due to a VACUUM, but the LSN check will fail
if ANY modification has occurred. So, rather than pressing forward
with that "optimization", just rip the LSN field out.
Patch by me, reviewed by Ashutosh Sharma and Amit Kapila
Discussion: http://postgr.es/m/CAA4eK1JxqqcuC5Un7YLQVhOYSZBS+t=3xqZuEkt5RyquyuxpwQ@mail.gmail.com
Commit 09cb5c0e7d added a similar
optimization to btree back in 2006, but nobody bothered to implement
the same thing for hash indexes, probably because they weren't
WAL-logged and had lots of other performance problems as well. As
with the corresponding btree case, this eliminates the problem of
potentially needing to refind our position within the page, and cuts
down on pin/unpin traffic as well.
Ashutosh Sharma, reviewed by Alexander Korotkov, Jesper Pedersen,
Amit Kapila, and me. Some final edits to comments and README by
me.
Discussion: http://postgr.es/m/CAE9k0Pm3KTx93K8_5j6VMzG4h5F+SyknxUwXrN-zqSZ9X8ZS3w@mail.gmail.com
This will be useful for hash partitioning, which needs a way to seed
the hash functions to avoid problems such as a hash index on a hash
partitioned table clumping all values into a small portion of the
bucket space; it's also useful for anything that wants a 64-bit hash
value rather than a 32-bit hash value.
Just in case somebody wants a 64-bit hash value that is compatible
with the existing 32-bit hash values, make the low 32-bits of the
64-bit hash value match the 32-bit hash value when the seed is 0.
Robert Haas and Amul Sul
Discussion: http://postgr.es/m/CA+Tgmoafx2yoJuhCQQOL5CocEi-w_uG4S2xT0EtgiJnPGcHW3g@mail.gmail.com
If it works, then we won't be storing two copies of all the tuples
that were just moved. If not, VACUUM will still take care of it
eventually. Per a report from AP and analysis from Amit Kapila, it
seems that a bulk load can cause splits fast enough that VACUUM won't
deal with the problem in time to prevent bloat.
Amit Kapila; I rewrote the comment.
Discussion: http://postgr.es/m/20170704105728.mwb72jebfmok2nm2@zip.com.au
One, logging for CREATE INDEX was oblivious to the fact that when
an unlogged table is created, *only* operations on the init fork
should be logged.
Two, init fork buffers need to be flushed after they are written;
otherwise, a filesystem-level copy following recovery may do the
wrong thing. (There may be a better fix for this issue than the
one used here, but this is transposed from the similar logic already
present in XLogReadBufferForRedoExtended, and a broader refactoring
after beta2 seems inadvisable.)
Amit Kapila, reviewed by Ashutosh Sharma, Kyotaro Horiguchi,
and Michael Paquier
Discussion: http://postgr.es/m/CAA4eK1JpcMsEtOL_J7WODumeEfyrPi7FPYHeVdS7fyyrCrgp4w@mail.gmail.com
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Remove some gratuituous message differences by making the AM name
previously embedded in each message be a %s instead. While at it, get
rid of terminology that's unclear and unnecessary in one message.
Discussion: https://postgr.es/m/20170523001557.bq2hbq7hxyvyw62q@alvherre.pgsql
Standardize on testing a hash index page's type by doing
(opaque->hasho_flag & LH_PAGE_TYPE) == LH_xxx_PAGE
Various places were taking shortcuts like
opaque->hasho_flag & LH_BUCKET_PAGE
which while not actually wrong, is still bad practice because
it encourages use of
opaque->hasho_flag & LH_UNUSED_PAGE
which *is* wrong (LH_UNUSED_PAGE == 0, so the above is constant false).
hash_xlog.c's hash_mask() contained such an incorrect test.
This also ensures that we mask out the additional flag bits that
hasho_flag has accreted since 9.6. pgstattuple's pgstat_hash_page(),
for one, was failing to do that and was thus actively broken.
Also fix assorted comments that hadn't been updated to reflect the
extended usage of hasho_flag, and fix some macros that were testing
just "(hasho_flag & bit)" to use the less dangerous, project-approved
form "((hasho_flag & bit) != 0)".
Coverity found the bug in hash_mask(); I noted the one in
pgstat_hash_page() through code reading.
Make every page in a hash index which isn't all-zeroes have a valid
special space, so that tools like pageinspect don't error out.
Also, make pageinspect cope with all-zeroes pages, because
_hash_alloc_buckets can leave behind large numbers of those until
they're consumed by splits.
Ashutosh Sharma and Robert Haas, reviewed by Amit Kapila.
Original trouble report from Jeff Janes.
Discussion: http://postgr.es/m/CAMkU=1y6NjKmqbJ8wLMhr=F74WzcMALYWcVFhEpm7i=mV=XsOg@mail.gmail.com
Since hash indexes typically have very few overflow pages, adding a
new splitpoint essentially doubles the on-disk size of the index,
which can lead to large and abrupt increases in disk usage (and
perhaps long delays on occasion). To mitigate this problem to some
degree, divide larger splitpoints into four equal phases. This means
that, for example, instead of growing from 4GB to 8GB all at once, a
hash index will now grow from 4GB to 5GB to 6GB to 7GB to 8GB, which
is perhaps still not as smooth as we'd like but certainly an
improvement.
This changes the on-disk format of the metapage, so bump HASH_VERSION
from 2 to 3. This will force a REINDEX of all existing hash indexes,
but that's probably a good idea anyway. First, hash indexes from
pre-10 versions of PostgreSQL could easily be corrupted, and we don't
want to confuse corruption carried over from an older release with any
corruption caused despite the new write-ahead logging in v10. Second,
it will let us remove some backward-compatibility code added by commit
293e24e507.
Mithun Cy, reviewed by Amit Kapila, Jesper Pedersen and me. Regression
test outputs updated by me.
Discussion: http://postgr.es/m/CAD__OuhG6F1gQLCgMQNnMNgoCvOLQZz9zKYJQNYvYmmJoM42gA@mail.gmail.com
Discussion: http://postgr.es/m/CA+TgmoYty0jCf-pa+m+vYUJ716+AxM7nv_syvyanyf5O-L_i2A@mail.gmail.com
In a couple of places, _hash_kill_items was mistakenly called with
the buffer lock not held. Repair.
Ashutosh Sharma, per a report from Andreas Seltenreich
Discussion: http://postgr.es/m/87o9wo8o0j.fsf@credativ.de
Most seriously, fix use of incorrect block ID, per a report from
Jeff Janes that it causes a crash and a diagnosis from Amit Kapila.
Improve consistency between the hash and btree versions of this
code by adding back a PANIC that btree has, and by registering
data in the xlog record in the same way, per complaints from
Jeff Janes and Amit Kapila.
Tidy up some minor cosmetic points, per complaints from Amit
Kapila.
Patch by Ashutosh Sharma, reviewed by Amit Kapila, and tested by
Jeff Janes.
Discussion: http://postgr.es/m/CAMkU=1w-9Qe=Ff1o6bSaXpNO9wqpo7_9GL8_CVhw4BoVVHasqg@mail.gmail.com
Clear LH_PAGE_HAS_DEAD_TUPLES during replay, similar to what gets done
for btree. Update hashdesc.c for xl_hash_vacuum_one_page.
Oversights in commit 6977b8b7f4 spotted
by Amit Kapila. Patch by Ashutosh Sharma.
Bump WAL version. The original patch to make hash indexes write-ahead
logged probably should have done this, and the single page vacuuming
patch probably should have done it again, but better late than never.
Discussion: http://postgr.es/m/CAA4eK1Kd=mJ9xreovcsh0qMiAj-QqCphHVQ_Lfau1DR9oVjASQ@mail.gmail.com
The warning about hash indexes not being write-ahead logged and their
use being discouraged has been removed. "snapshot too old" is now
supported for tables with hash indexes. Most importantly, barring
bugs, hash indexes will now be crash-safe and usable on standbys.
This commit doesn't yet add WAL consistency checking for hash
indexes, as we now have for other index types; a separate patch has
been submitted to cure that lack.
Amit Kapila, reviewed and slightly modified by me. The larger patch
series of which this is a part has been reviewed and tested by Álvaro
Herrera, Ashutosh Sharma, Mark Kirkwood, Jeff Janes, and Jesper
Pedersen.
Discussion: http://postgr.es/m/CAA4eK1JOBX=YU33631Qh-XivYXtPSALh514+jR8XeD7v+K3r_Q@mail.gmail.com
The primary goal here is to move all of the related page modifications
to a single section of code, in preparation for adding write-ahead
logging. In passing, rename _hash_metapinit to _hash_init, since it
initializes more than just the metapage.
Amit Kapila. The larger patch series of which this is a part has been
reviewed and tested by Álvaro Herrera, Ashutosh Sharma, Mark Kirkwood,
Jeff Janes, and Jesper Pedersen.
As with commit 30df93f698 and commit
b0f18cb77f, the goal here is to move all
of the related page modifications to a single section of code, in
preparation for adding write-ahead logging.
Amit Kapila, with slight changes by me. The larger patch series of
which this is a part has been reviewed and tested by Álvaro Herrera,
Ashutosh Sharma, Mark Kirkwood, Jeff Janes, and Jesper Pedersen.
As with commit b0f18cb77f, the goal
here is to move all of the related page modifications to a single
section of code, in preparation for adding write-ahead logging.
Amit Kapila, with slight changes by me. The larger patch series
of which this is a part has been reviewed and tested by Álvaro
Herrera, Ashutosh Sharma, Mark Kirkwood, Jeff Janes, and Jesper
Pedersen, all of whom should also have been credited in the
previous commit message.
In preparation for adding write-ahead logging to hash indexes,
refactor _hash_freeovflpage and _hash_squeezebucket so that all
related page modifications happen in a single section of code. The
previous coding assumed that it would be fine to move tuples one at a
time, and also that the various operations involved in freeing an
overflow page didn't necessarily all need to be done together, all
of which is true if you don't care about write-ahead logging.
Amit Kapila, with slight changes by me.
In combination with 569174f1be, which
taught the btree AM how to perform parallel index scans, this allows
parallel index scan plans on btree indexes. This infrastructure
should be general enough to support parallel index scans for other
index AMs as well, if someone updates them to support parallel
scans.
Amit Kapila, reviewed and tested by Anastasia Lubennikova, Tushar
Ahuja, and Haribabu Kommi, and me.
It did that to verify that the page was an overflow page rather than
anything else, but that means that checking the status of all the
overflow bits requires reading the entire index. So don't do that.
The new code validates that the page is not a primary bucket page
or bitmap page by looking at the metapage, so that using this on
large numbers of pages can be reasonably efficient.
Ashutosh Sharma, per a complaint from me, and with further
modifications by me.
It's always been possible for index AMs to cache data across successive
amgettuple calls within a single SQL command: the IndexScanDesc.opaque
field is meant for precisely that. However, no comparable facility
exists for amortizing setup work across successive aminsert calls.
This patch adds such a feature and teaches GIN, GIST, and BRIN to use it
to amortize catalog lookups they'd previously been doing on every call.
(The other standard index AMs keep everything they need in the relcache,
so there's little to improve there.)
For GIN, the overall improvement in a statement that inserts many rows
can be as much as 10%, though it seems a bit less for the other two.
In addition, this makes a really significant difference in runtime
for CLOBBER_CACHE_ALWAYS tests, since in those builds the repeated
catalog lookups are vastly more expensive.
The reason this has been hard up to now is that the aminsert function is
not passed any useful place to cache per-statement data. What I chose to
do is to add suitable fields to struct IndexInfo and pass that to aminsert.
That's not widening the index AM API very much because IndexInfo is already
within the ken of ambuild; in fact, by passing the same info to aminsert
as to ambuild, this is really removing an inconsistency in the AM API.
Discussion: https://postgr.es/m/27568.1486508680@sss.pgh.pa.us
This avoids a very significant amount of buffer manager traffic and
contention when scanning hash indexes, because it's no longer
necessary to lock and pin the metapage for every scan. We do need
some way of figuring out when the cache is too stale to use any more,
so that when we lock the primary bucket page to which the cached
metapage points us, we can tell whether a split has occurred since we
cached the metapage data. To do that, we use the hash_prevblkno field
in the primary bucket page, which would otherwise always be set to
InvalidBuffer.
This patch contains code so that it will continue working (although
less efficiently) with hash indexes built before this change, but
perhaps we should consider bumping the hash version and ripping out
the compatibility code. That decision can be made later, though.
Mithun Cy, reviewed by Jesper Pedersen, Amit Kapila, and by me.
Before committing, I made a number of cosmetic changes to the last
posted version of the patch, adjusted _hash_getcachedmetap to be more
careful about order of operation, and made some necessary updates to
the pageinspect documentation and regression tests.
Patch by Jesper Pedersen and Ashutosh Sharma, with some error handling
improvements by me. Tests from Peter Eisentraut. Reviewed by Álvaro
Herrera, Michael Paquier, Jesper Pedersen, Jeff Janes, Peter
Eisentraut, Amit Kapila, Mithun Cy, and me.
Discussion: http://postgr.es/m/e2ac6c58-b93f-9dd9-f4e6-d6d30add7fdf@redhat.com
This patch doesn't actually make any index AM parallel-aware, but it
provides the necessary functions at the AM layer to do so.
Rahila Syed, Amit Kapila, Robert Haas
Gen_fmgrtab.pl creates a new file fmgrprotos.h, which contains
prototypes for all functions registered in pg_proc.h. This avoids
having to manually maintain these prototypes across a random variety of
header files. It also automatically enforces a correct function
signature, and since there are warnings about missing prototypes, it
will detect functions that are defined but not registered in
pg_proc.h (or otherwise used).
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Instead of relying on the page contents to know whether we have
advanced from the primary bucket page to an overflow page, track
that explicitly.
Amit Kapila, per a complaint by me.
hashname() asserted that the key string it is given is shorter than
NAMEDATALEN. That should surely always be true if the input is in fact a
regular value of type "name". However, for reasons of coding convenience,
we allow plain old C strings to be treated as "name" values in many places.
Some SQL functions accept arbitrary "text" inputs, convert them to C
strings, and pass them otherwise-untransformed to syscache lookups for name
columns, allowing an overlength input value to trigger hashname's Assert.
This would be a DOS problem, except that it only happens in assert-enabled
builds which aren't recommended for production. In a production build,
you'll just get a name lookup error, since regardless of the hash value
computed by hashname, the later equality comparison checks can't match.
Likewise, if the catalog lookup is done by seqscan or indexscan searches,
there will just be a lookup error, since the name comparison functions
don't contain any similar length checks, and will see an overlength input
as unequal to any stored entry.
After discussion we concluded that we should simply remove this Assert.
It's inessential to hashname's own functionality, and having such an
assertion in only some paths for name lookup is more of a foot-gun than
a useful check. There may or may not be a case for the affected callers
to do something other than let the name lookup fail, but we'll consider
that separately; in any case we probably don't want to change such
behavior in the back branches.
Per report from Tushar Ahuja. Back-patch to all supported branches.
Report: https://postgr.es/m/7d0809ee-6f25-c9d6-8e74-5b2967830d49@enterprisedb.com
Discussion: https://postgr.es/m/17691.1482523168@sss.pgh.pa.us
This is basically for the same reasons I got rid of _hash_wrtbuf()
in commit 25216c98938495fd741bf585dcbef45b3a9ffd40: it's not
convenient to have a function which encapsulates MarkBufferDirty(),
especially as we move towards having hash indexes be WAL-logged.
Patch by me, reviewed (but not entirely endorsed) by Amit Kapila.
You can't just cast a HashMetaPage to a Page, because the meta page
data is stored after the page header, not at offset 0. Fortunately,
this didn't break anything because it happens to find hashm_bsize
at the offset at which it expects to find pd_pagesize_version, and
the values are close enough to the same that this works out.
Still, it's a bug, so back-patch to all supported versions.
Mithun Cy, revised a bit by me.
A bucket squeeze operation needs to lock each page of the bucket
before releasing the prior page, but the previous coding fumbled the
locking when freeing an overflow page during a bucket squeeze
operation. Commit 6d46f4783e
introduced this bug.
Amit Kapila, with help from Kuntal Ghosh and Dilip Kumar, after
an initial trouble report by Jeff Janes. Reviewed by me. I also
fixed a problem with a comment.
In _hash_freeovflpage(), if we're freeing the overflow page that
immediate follows the page to which tuples are being moved (the
confusingly-named "write buffer"), don't forget to mark that
page dirty after updating its hasho_nextblkno.
In _hash_squeezebucket(), it's not necessary to mark the primary
bucket page dirty if there are no overflow pages, because there's
nothing to squeeze in that case.
Amit Kapila, with help from Kuntal Ghosh and Dilip Kumar, after
an initial trouble report by Jeff Janes.
The whole concept of _hash_wrtbuf() is that we need to know at the
time we're releasing the buffer lock (and pin) whether we dirtied the
buffer, but this is easy to get wrong. This patch actually fixes one
non-obvious bug of that form: hashbucketcleanup forgot to signal
_hash_squeezebucket, which gets the primary bucket page already
locked, as to whether it had already dirtied the page. Calling
MarkBufferDirty() at the places where we dirty the buffer is more
intuitive and lets us simplify the code in various places as well.
On top of all that, the ultimate goal here is to make hash indexes
WAL-logged, and as the comments to _hash_wrtbuf() note, it should
go away when that happens. Making it go away a little earlier than
that seems like a good preparatory step.
Report by Jeff Janes. Diagnosis by Amit Kapila, Kuntal Ghosh,
and Dilip Kumar. Patch by me, after studying an alternative patch
submitted by Amit Kapila.
Discussion: http://postgr.es/m/CAA4eK1Kf6tOY0oVz_SEdngiNFkeXrA3xUSDPPORQvsWVPdKqnA@mail.gmail.com
Commit 6d46f4783e failed to account for
the possibility that hashbulkdelete() might encounter a bucket that
has been split since it began scanning the bucket array. Repair.
Extracted from a larger pathc by Amit Kapila; I rewrote the comment.
It's possible for the metapage contents to change after we release
the lock, so we must read them before releasing the lock.
Amit Kapila. Submitted in response to a trouble report from
Andreas Seltenreich, though it is not certain this fixes the
problem.
Previously, the right to split a bucket was represented by a
heavyweight lock on the page number of the primary bucket page.
Unfortunately, this meant that every scan needed to take a heavyweight
lock on that bucket also, which was bad for concurrency. Instead, use
a cleanup lock on the primary bucket page to indicate the right to
begin a split, so that scans only need to retain a pin on that page,
which is they would have to acquire anyway, and which is also much
cheaper.
In addition to reducing the locking cost, this also avoids locking out
scans and inserts for the entire lifetime of the split: while the new
bucket is being populated with copies of the appropriate tuples from
the old bucket, scans and inserts can happen in parallel. There are
minor concurrency improvements for vacuum operations as well, though
the situation there is still far from ideal.
This patch also removes the unworldly assumption that a split will
never be interrupted. With the new code, a split is done in a series
of small steps and the system can pick up where it left off if it is
interrupted prior to completion. While this patch does not itself add
write-ahead logging for hash indexes, it is clearly a necessary first
step, since one of the things that could interrupt a split is the
removal of electrical power from the machine performing it.
Amit Kapila. I wrote the original design on which this patch is
based, and did a good bit of work on the comments and README through
multiple rounds of review, but all of the code is Amit's. Also
reviewed by Jesper Pedersen, Jeff Janes, and others.
Discussion: http://postgr.es/m/CAA4eK1LfzcZYxLoXS874Ad0+S-ZM60U9bwcyiUZx9mHZ-KCWhw@mail.gmail.com
When squeezing a bucket during vacuum, it's not necessary to retain
any tuples already marked as dead, so ignore them when deciding which
tuples must be moved in order to empty a bucket page. Similarly, when
splitting a bucket, relocating dead tuples to the new bucket is a
waste of effort; instead, just ignore them.
Amit Kapila, reviewed by me. Testing help provided by Ashutosh
Sharma.
These functions were originally added in commit d8cedf67a to support
use of int2vector columns as catcache lookup keys. However, there are
no catcaches that use such columns. (Indeed I now think it must always
have been dead code: a catcache with such a key column would need an
underlying unique index on the column, but we've never had an int2vector
btree opclass.)
Getting rid of the int2vector-specific operator and function does not
lose any functionality, because operations on int2vectors will now fall
back to the generic anyarray support. This avoids a wart that a btree
index on an int2vector column (made using anyarray_ops) would fail to
match equality searches, because int2vectoreq wasn't a member of the
opclass. We don't really care much about that, since int2vector is not
meant as a type for users to use, but it's silly to have extra code and
less functionality.
If we ever do want a catcache to be indexed by an int2vector column,
we'd need to put back full btree and hash opclasses for int2vector,
comparable to the support for oidvector. (The anyarray code can't be
used at such a low level, because it needs to do catcache lookups.)
But we'll deal with that if/when the need arises.
Also worth noting is that removal of the hash int2vector_ops opclass will
break any user-created hash indexes on int2vector columns. While hash
anyarray_ops would serve the same purpose, it would probably not compute
the same hash values and thus wouldn't be on-disk-compatible. Given that
int2vector isn't a user-facing type and we're planning other incompatible
changes in hash indexes for v10 anyway, this doesn't seem like something
to worry about, but it's probably worth mentioning here.
Amit Langote
Discussion: <d9bb74f8-b194-7307-9ebd-90645d377e45@lab.ntt.co.jp>
Since the hash AM is going to be revamped to have WAL, this is a good
opportunity to clean up the include file a little bit to avoid including
a lot of extra stuff in the future.
Author: Amit Kapila
Per discussion, we should provide such functions to replace the lost
ability to discover AM properties by inspecting pg_am (cf commit
65c5fcd35). The added functionality is also meant to displace any code
that was looking directly at pg_index.indoption, since we'd rather not
believe that the bit meanings in that field are part of any client API
contract.
As future-proofing, define the SQL API to not assume that properties that
are currently AM-wide or index-wide will remain so unless they logically
must be; instead, expose them only when inquiring about a specific index
or even specific index column. Also provide the ability for an index
AM to override the behavior.
In passing, document pg_am.amtype, overlooked in commit 473b93287.
Andrew Gierth, with kibitzing by me and others
Discussion: <87mvl5on7n.fsf@news-spur.riddles.org.uk>
We've broken this code path at least twice in the past, so it's prudent
to have a test case that covers it. To allow exercising the code path
without creating a very large (and slow to run) test case, redefine the
sort threshold to be bounded by maintenance_work_mem as well as the number
of available buffers. While at it, fix an ancient oversight that when
building a temp index, the number of available buffers is not NBuffers but
NLocBuffer. Also, if assertions are enabled, apply a direct test that the
sort actually does return the tuples in the expected order.
Peter Geoghegan
Patch: <CAM3SWZTBAo4hjbBd780+MrOKiKp_TMo1N3A0Rw9_im8gbD7fQA@mail.gmail.com>
When the index is predicted to need more than NBuffers buckets,
CREATE INDEX attempts to sort the index entries by hash key before
insertion, so as to reduce thrashing. This code path got broken by
commit 9f03ca9151, which overlooked that _hash_form_tuple() is not
just an alias for index_form_tuple(). The index got built anyway, but
with garbage data, so that searches for pre-existing tuples always
failed. Fix by refactoring to separate construction of the indexable
data from calling index_form_tuple().
Per bug #14210 from Daniel Newman. Back-patch to 9.5 where the
bug was introduced.
Report: <20160623162507.17237.39471@wrigleys.postgresql.org>
Hash indexes are not WAL-logged, and so do not maintain the LSN of
index pages. Since the "snapshot too old" feature counts on
detecting error conditions using the LSN of a table and all indexes
on it, this makes it impossible to safely do early vacuuming on any
table with a hash index, so add this to the tests for whether the
xid used to vacuum a table can be adjusted based on
old_snapshot_threshold.
While at it, add a paragraph to the docs for old_snapshot_threshold
which specifically mentions this and other aspects of the feature
which may otherwise surprise users.
Problem reported and patch reviewed by Amit Kapila
The reverted changes were intended to force a choice of whether any
newly-added BufferGetPage() calls needed to be accompanied by a
test of the snapshot age, to support the "snapshot too old"
feature. Such an accompanying test is needed in about 7% of the
cases, where the page is being used as part of a scan rather than
positioning for other purposes (such as DML or vacuuming). The
additional effort required for back-patching, and the doubt whether
the intended benefit would really be there, have indicated it is
best just to rely on developers to do the right thing based on
comments and existing usage, as we do with many other conventions.
This change should have little or no effect on generated executable
code.
Motivated by the back-patching pain of Tom Lane and Robert Haas
This feature is controlled by a new old_snapshot_threshold GUC. A
value of -1 disables the feature, and that is the default. The
value of 0 is just intended for testing. Above that it is the
number of minutes a snapshot can reach before pruning and vacuum
are allowed to remove dead tuples which the snapshot would
otherwise protect. The xmin associated with a transaction ID does
still protect dead tuples. A connection which is using an "old"
snapshot does not get an error unless it accesses a page modified
recently enough that it might not be able to produce accurate
results.
This is similar to the Oracle feature, and we use the same SQLSTATE
and error message for compatibility.
This patch is a no-op patch which is intended to reduce the chances
of failures of omission once the functional part of the "snapshot
too old" patch goes in. It adds parameters for snapshot, relation,
and an enum to specify whether the snapshot age check needs to be
done for the page at this point. This initial patch passes NULL
for the first two new parameters and BGP_NO_SNAPSHOT_TEST for the
third. The follow-on patch will change the places where the test
needs to be made.
Now indexes (but only B-tree for now) can contain "extra" column(s) which
doesn't participate in index structure, they are just stored in leaf
tuples. It allows to use index only scan by using single index instead
of two or more indexes.
Author: Anastasia Lubennikova with minor editorializing by me
Reviewers: David Rowley, Peter Geoghegan, Jeff Janes
The original coding was quite fast so long as objects were always
released in reverse order of addition; otherwise, it degenerated into
O(N^2) behavior due to searching for the array element to delete.
Improve matters by switching to hashed storage when the number of
objects of a given type exceeds 64. (The cutover point is open to
discussion, of course, but some simple performance testing suggests
that hashing has enough overhead to be a loser below there.)
Also, refactor resowner.c so that we don't need N copies of the array
management code. Since all the resource IDs the code currently needs
to deal with are either pointers or integers, it seems sufficient to
create a one-size-fits-all infrastructure in which everything is
converted to a Datum for storage.
Aleksander Alekseev, reviewed by Stas Kelvich, further fixes by me
The amvalidate functions added in commit 65c5fcd353 were on the
crude side. Improve them in a few ways:
* Perform signature checking for operators and support functions.
* Apply more thorough checks for missing operators and functions,
where possible.
* Instead of reporting problems as ERRORs, report most problems as INFO
messages and make the amvalidate function return FALSE. This allows
more than one problem to be discovered per run.
* Report object names rather than OIDs, and work a bit harder on making
the messages understandable.
Also, remove a few more opr_sanity regression test queries that are
now superseded by the amvalidate checks.
This patch reduces pg_am to just two columns, a name and a handler
function. All the data formerly obtained from pg_am is now provided
in a C struct returned by the handler function. This is similar to
the designs we've adopted for FDWs and tablesample methods. There
are multiple advantages. For one, the index AM's support functions
are now simple C functions, making them faster to call and much less
error-prone, since the C compiler can now check function signatures.
For another, this will make it far more practical to define index access
methods in installable extensions.
A disadvantage is that SQL-level code can no longer see attributes
of index AMs; in particular, some of the crosschecks in the opr_sanity
regression test are no longer possible from SQL. We've addressed that
by adding a facility for the index AM to perform such checks instead.
(Much more could be done in that line, but for now we're content if the
amvalidate functions more or less replace what opr_sanity used to do.)
We might also want to expose some sort of reporting functionality, but
this patch doesn't do that.
Alexander Korotkov, reviewed by Petr Jelínek, and rather heavily
editorialized on by me.
Commit ed9cc2b5df made it unnecessary to pass
start_nblkno to _hash_splitbucket(), and for that matter unnecessary to
have the internal nblkno variable either. My compiler didn't complain
about that, but some did. I also rearranged the use of oblkno a bit to
make that case more parallel.
Report and initial patch by Petr Jelinek, rearranged a bit by me.
Back-patch to all branches, like the previous patch.
_hash_splitbucket() obtained the base page of the new bucket by calling
_hash_getnewbuf(), but it held no exclusive lock that would prevent some
other process from calling _hash_getnewbuf() at the same time. This is
contrary to _hash_getnewbuf()'s API spec and could in fact cause failures.
In practice, we must only call that function while holding write lock on
the hash index's metapage.
An additional problem was that we'd already modified the metapage's bucket
mapping data, meaning that failure to extend the index would leave us with
a corrupt index.
Fix both issues by moving the _hash_getnewbuf() call to just before we
modify the metapage in _hash_expandtable().
Unfortunately there's still a large problem here, which is that we could
also incur ENOSPC while trying to get an overflow page for the new bucket.
That would leave the index corrupt in a more subtle way, namely that some
index tuples that should be in the new bucket might still be in the old
one. Fixing that seems substantially more difficult; even preallocating as
many pages as we could possibly need wouldn't entirely guarantee that the
bucket split would complete successfully. So for today let's just deal
with the base case.
Per report from Antonin Houska. Back-patch to all active branches.
Each WAL record now carries information about the modified relation and
block(s) in a standardized format. That makes it easier to write tools that
need that information, like pg_rewind, prefetching the blocks to speed up
recovery, etc.
There's a whole new API for building WAL records, replacing the XLogRecData
chains used previously. The new API consists of XLogRegister* functions,
which are called for each buffer and chunk of data that is added to the
record. The new API also gives more control over when a full-page image is
written, by passing flags to the XLogRegisterBuffer function.
This also simplifies the XLogReadBufferForRedo() calls. The function can dig
the relation and block number from the WAL record, so they no longer need to
be passed as arguments.
For the convenience of redo routines, XLogReader now disects each WAL record
after reading it, copying the main data part and the per-block data into
MAXALIGNed buffers. The data chunks are not aligned within the WAL record,
but the redo routines can assume that the pointers returned by XLogRecGet*
functions are. Redo routines are now passed the XLogReaderState, which
contains the record in the already-disected format, instead of the plain
XLogRecord.
The new record format also makes the fixed size XLogRecord header smaller,
by removing the xl_len field. The length of the "main data" portion is now
stored at the end of the WAL record, and there's a separate header after
XLogRecord for it. The alignment padding at the end of XLogRecord is also
removed. This compansates for the fact that the new format would otherwise
be more bulky than the old format.
Reviewed by Andres Freund, Amit Kapila, Michael Paquier, Alvaro Herrera,
Fujii Masao.
There was a window in RestoreBackupBlock where a page would be zeroed out,
but not yet locked. If a backend pinned and locked the page in that window,
it saw the zeroed page instead of the old page or new page contents, which
could lead to missing rows in a result set, or errors.
To fix, replace RBM_ZERO with RBM_ZERO_AND_LOCK, which atomically pins,
zeroes, and locks the page, if it's not in the buffer cache already.
In stable branches, the old RBM_ZERO constant is renamed to RBM_DO_NOT_USE,
to avoid breaking any 3rd party extensions that might use RBM_ZERO. More
importantly, this avoids renumbering the other enum values, which would
cause even bigger confusion in extensions that use ReadBufferExtended, but
haven't been recompiled.
Backpatch to all supported versions; this has been racy since hot standby
was introduced.
The previous code, perhaps out of concern for avoid memory leaks, formed
the tuple in one memory context and then copied it to another memory
context. However, this doesn't appear to be necessary, since
index_form_tuple and the functions it calls take precautions against
leaking memory. In my testing, building the tuple directly inside the
sort context shaves several percent off the index build time.
Rearrange things so we do that.
Patch by me. Review by Amit Kapila, Tom Lane, Andres Freund.
Since C99, it's been standard for printf and friends to accept a "z" size
modifier, meaning "whatever size size_t has". Up to now we've generally
dealt with printing size_t values by explicitly casting them to unsigned
long and using the "l" modifier; but this is really the wrong thing on
platforms where pointers are wider than longs (such as Win64). So let's
start using "z" instead. To ensure we can do that on all platforms, teach
src/port/snprintf.c to understand "z", and add a configure test to force
use of that implementation when the platform's version doesn't handle "z".
Having done that, modify a bunch of places that were using the
unsigned-long hack to use "z" instead. This patch doesn't pretend to have
gotten everyplace that could benefit, but it catches many of them. I made
an effort in particular to ensure that all uses of the same error message
text were updated together, so as not to increase the number of
translatable strings.
It's possible that this change will result in format-string warnings from
pre-C99 compilers. We might have to reconsider if there are any popular
compilers that will warn about this; but let's start by seeing what the
buildfarm thinks.
Andres Freund, with a little additional work by me
This avoids an assumption about the signed number representation. It is
anticipated to have no functional changes on supported configurations;
many two's complement assumptions remain elsewhere.
Per a suggestion from Andres Freund.
MarkBufferDirtyHint() writes WAL, and should know if it's got a
standard buffer or not. Currently, the only callers where buffer_std
is false are related to the FSM.
In passing, rename XLOG_HINT to XLOG_FPI, which is more descriptive.
Back-patch to 9.3.
Checksums are set immediately prior to flush out of shared buffers
and checked when pages are read in again. Hint bit setting will
require full page write when block is dirtied, which causes various
infrastructure changes. Extensive comments, docs and README.
WARNING message thrown if checksum fails on non-all zeroes page;
ERROR thrown but can be disabled with ignore_checksum_failure = on.
Feature enabled by an initdb option, since transition from option off
to option on is long and complex and has not yet been implemented.
Default is not to use checksums.
Checksum used is WAL CRC-32 truncated to 16-bits.
Simon Riggs, Jeff Davis, Greg Smith
Wide input and assistance from many community members. Thank you.
This patch addresses the problem that applications currently have to
extract object names from possibly-localized textual error messages,
if they want to know for example which index caused a UNIQUE_VIOLATION
failure. It adds new error message fields to the wire protocol, which
can carry the name of a table, table column, data type, or constraint
associated with the error. (Since the protocol spec has always instructed
clients to ignore unrecognized field types, this should not create any
compatibility problem.)
Support for providing these new fields has been added to just a limited set
of error reports (mainly, those in the "integrity constraint violation"
SQLSTATE class), but we will doubtless add them to more calls in future.
Pavel Stehule, reviewed and extensively revised by Peter Geoghegan, with
additional hacking by Tom Lane.
Avoid using LockPage(rel, 0, lockmode) to protect against changes to
the bucket mapping. Instead, an exclusive buffer content lock is now
viewed as sufficient permission to modify the metapage, and a shared
buffer content lock is used when such modifications need to be
prevented. This more relaxed locking regimen makes it possible that,
when we're busy getting a heavyweight bucket on the bucket we intend
to search or insert into, a bucket split might occur underneath us.
To compenate for that possibility, we use a loop-and-retry system:
release the metapage content lock, acquire the heavyweight lock on the
target bucket, and then reacquire the metapage content lock and check
that the bucket mapping has not changed. Normally it hasn't, and
we're done. But if by chance it has, we simply unlock the metapage,
release the heavyweight lock we acquired previously, lock the new
bucket, and loop around again. Even in the worst case we cannot loop
very many times here, since we don't split the same bucket again until
we've split all the other buckets, and 2^N gets big pretty fast.
This results in greatly improved concurrency, because we're
effectively replacing two lwlock acquire-and-release cycles in
exclusive mode (on one of the lock manager locks) with a single
acquire-and-release cycle in shared mode (on the metapage buffer
content lock). Testing shows that it's still not quite as good as
btree; for that, we'd probably have to find some way of getting rid
of the heavyweight bucket locks as well, which does not appear
straightforward.
Patch by me, review by Jeff Janes.
The latter was already the dominant use, and it's preferable because
in C the convention is that intXX means XX bits. Therefore, allowing
mixed use of int2, int4, int8, int16, int32 is obviously confusing.
Remove the typedefs for int2 and int4 for now. They don't seem to be
widely used outside of the PostgreSQL source tree, and the few uses
can probably be cleaned up by the time this ships.
For those variables only used when asserts are enabled, use a new
macro PG_USED_FOR_ASSERTS_ONLY, which expands to
__attribute__((unused)) when asserts are not enabled.
Add a column pg_class.relallvisible to remember the number of pages that
were all-visible according to the visibility map as of the last VACUUM
(or ANALYZE, or some other operations that update pg_class.relpages).
Use relallvisible/relpages, instead of an arbitrary constant, to estimate
how many heap page fetches can be avoided during an index-only scan.
This is pretty primitive and will no doubt see refinements once we've
acquired more field experience with the index-only scan mechanism, but
it's way better than using a constant.
Note: I had to adjust an underspecified query in the window.sql regression
test, because it was changing answers when the plan changed to use an
index-only scan. Some of the adjacent tests perhaps should be adjusted
as well, but I didn't do that here.
Tom Lane
Robert Haas
Alvaro Herrera
Magnus Hagander
Bruce Momjian
Heikki Linnakangas
Peter Eisentraut
Kevin Grittner
Teodor Sigaev
Noah Misch
Jeff Davis
Stephen Frost
Simon Riggs