GetWalRcvWriteRecPtr() previously reported the latest *flushed*
location. Adopt the conventional terminology used elsewhere in the tree
by renaming it to GetWalRcvFlushRecPtr(), and likewise for some related
variables that used the term "received".
Add a new definition of GetWalRcvWriteRecPtr(), which returns the latest
*written* value. This will allow later patches to use the value for
non-data-integrity purposes, without having to wait for the flush
pointer to advance.
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq%3DAovOddfHpA%40mail.gmail.com
0f5ca02f53 introduces 3 new keywords. It appears to be too much for relatively
small feature. Given now we past feature freeze, it's already late for
discussion of the new syntax. So, revert.
Discussion: https://postgr.es/m/28209.1586294824%40sss.pgh.pa.us
The goal of separating hotly accessed per-backend data from PGPROC
into PGXACT is to make accesses fast (GetSnapshotData() in
particular). But delayChkpt is not actually accessed frequently; only
when starting a checkpoint. As it is frequently modified (multiple
times in the course of a single transaction), storing it in the same
cacheline as hotly accessed data unnecessarily dirties a contended
cacheline.
Therefore move delayChkpt to PGPROC.
This is part of a larger series of patches intending to improve
GetSnapshotData() scalability. It is committed and pushed separately,
as it is independently beneficial (small but measurable win, limited
by the other frequent modifications of PGXACT).
Author: Andres Freund
Reviewed-By: Robert Haas, Thomas Munro, David Rowley
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
SLRU page hits were tracked only in SimpleLruReadPage, but that's not
enough because we may hit the page in SimpleLruReadPage_ReadOnly in
which case we don't call SimpleLruReadPage at all.
Reported-by: Kuntal Ghosh
Discussion: https://postgr.es/m/20200119143707.gyinppnigokesjok@development
Before the fix every 2PC commit/abort leaked a file descriptor. As the
files are opened using BasicOpenFile(), that quickly leads to the
backend running out of file descriptors.
Once enough 2PC abort/commit have caused enough FDs to leak, any IO
in the backend will fail with "Too many open files", as
BasicOpenFilePerm() will have triggered all open files known to fd.c
to be closed.
The leak causing the problem at hand is a consequence of 0dc8ead46,
but is only exascerbated by it. Previously most XLogPageReadCB
callbacks used static variables to cache one open file, but after the
commit the cache is private to each XLogReader instance. There never
was infrastructure to close FDs at the time of XLogReaderFree, but the
way XLogReader was used limited the leak to one FD.
This commit just closes the during XLogReaderFree() if the FD is
stored in XLogReaderState.seg.ws_segno. This may not be the way to
solve this medium/long term, but at least unbreaks 2PC.
Discussion: https://postgr.es/m/20200406025651.fpzdb5yyb7qyhqko@alap3.anarazel.de
Replication slots are useful to retain data that may be needed by a
replication system. But experience has shown that allowing them to
retain excessive data can lead to the primary failing because of running
out of space. This new feature allows the user to configure a maximum
amount of space to be reserved using the new option
max_slot_wal_keep_size. Slots that overrun that space are invalidated
at checkpoint time, enabling the storage to be released.
Author: Kyotaro HORIGUCHI <horiguchi.kyotaro@lab.ntt.co.jp>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20170228.122736.123383594.horiguchi.kyotaro@lab.ntt.co.jp
This commit adds following optional clause to BEGIN and START TRANSACTION
commands.
WAIT FOR LSN lsn [ TIMEOUT timeout ]
New clause pospones transaction start till given lsn is applied on standby.
This clause allows user be sure, that changes previously made on primary would
be visible on standby.
New shared memory struct is used to track awaited lsn per backend. Recovery
process wakes up backend once required lsn is applied.
Author: Ivan Kartyshov, Anna Akenteva
Reviewed-by: Craig Ringer, Thomas Munro, Robert Haas, Kyotaro Horiguchi
Reviewed-by: Masahiko Sawada, Ants Aasma, Dmitry Ivanov, Simon Riggs
Reviewed-by: Amit Kapila, Alexander Korotkov
Discussion: https://postgr.es/m/0240c26c-9f84-30ea-fca9-93ab2df5f305%40postgrespro.ru
Previously when there were multiple timelines listed in the history file
of the recovery target timeline, archive recovery searched all of them,
starting from the newest timeline to the oldest one, to find the segment
to read. That is, archive recovery had to continuously fail scanning
the segment until it reached the timeline that the segment belonged to.
These scans for non-existent segment could be harmful on the recovery
performance especially when archival area was located on the remote
storage and each scan could take a long time.
To address the issue, this commit changes archive recovery so that
it skips scanning the timeline that the segment to read doesn't belong to.
Author: Kyotaro Horiguchi, tweaked a bit by Fujii Masao
Reviewed-by: David Steele, Pavel Suderevsky, Grigory Smolkin
Discussion: https://postgr.es/m/16159-f5a34a3a04dc67e0@postgresql.org
Discussion: https://postgr.es/m/20200129.120222.1476610231001551715.horikyota.ntt@gmail.com
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Bump XLOG_PAGE_MAGIC, since this introduces XLOG_GIST_ASSIGN_LSN.
Future servers accept older WAL, so this bump is discretionary.
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
This allows gathering the WAL generation statistics for each statement
execution. The three statistics that we collect are the number of WAL
records, the number of full page writes and the amount of WAL bytes
generated.
This helps the users who have write-intensive workload to see the impact
of I/O due to WAL. This further enables us to see approximately what
percentage of overall WAL is due to full page writes.
In the future, we can extend this functionality to allow us to compute the
the exact amount of WAL data due to full page writes.
This patch in itself is just an infrastructure to compute WAL usage data.
The upcoming patches will expose this data via explain, auto_explain,
pg_stat_statements and verbose (auto)vacuum output.
Author: Kirill Bychik, Julien Rouhaud
Reviewed-by: Dilip Kumar, Fujii Masao and Amit Kapila
Discussion: https://postgr.es/m/CAB-hujrP8ZfUkvL5OYETipQwA=e3n7oqHFU=4ZLxWS_Cza3kQQ@mail.gmail.com
A manifest is a JSON document which includes (1) the file name, size,
last modification time, and an optional checksum for each file backed
up, (2) timelines and LSNs for whatever WAL will need to be replayed
to make the backup consistent, and (3) a checksum for the manifest
itself. By default, we use CRC-32C when checksumming data files,
because we are trying to detect corruption and user error, not foil an
adversary. However, pg_basebackup and the server-side BASE_BACKUP
command now have options to select a different algorithm, so users
wanting a cryptographic hash function can select SHA-224, SHA-256,
SHA-384, or SHA-512. Users not wanting file checksums at all can
disable them, or disable generating of the backup manifest altogether.
Using a cryptographic hash function in place of CRC-32C consumes
significantly more CPU cycles, which may slow down backups in some
cases.
A new tool called pg_validatebackup can validate a backup against the
manifest. If no checksums are present, it can still check that the
right files exist and that they have the expected sizes. If checksums
are present, it can also verify that each file has the expected
checksum. Additionally, it calls pg_waldump to verify that the
expected WAL files are present and parseable. Only plain format
backups can be validated directly, but tar format backups can be
validated after extracting them.
Robert Haas, with help, ideas, review, and testing from David Steele,
Stephen Frost, Andrew Dunstan, Rushabh Lathia, Suraj Kharage, Tushar
Ahuja, Rajkumar Raghuwanshi, Mark Dilger, Davinder Singh, Jeevan
Chalke, Amit Kapila, Andres Freund, and Noah Misch.
Discussion: http://postgr.es/m/CA+TgmoZV8dw1H2bzZ9xkKwdrk8+XYa+DC9H=F7heO2zna5T6qg@mail.gmail.com
There's a number of SLRU caches used to access important data like clog,
commit timestamps, multixact, asynchronous notifications, etc. Until now
we had no easy way to monitor these shared caches, compute hit ratios,
number of reads/writes etc.
This commit extends the statistics collector to track this information
for a predefined list of SLRUs, and also introduces a new system view
pg_stat_slru displaying the data.
The list of built-in SLRUs is fixed, but additional SLRUs may be defined
in extensions. Unfortunately, there's no suitable registry of SLRUs, so
this patch simply defines a fixed list of SLRUs with entries for the
built-in ones and one entry for all additional SLRUs. Extensions adding
their own SLRU are fairly rare, so this seems acceptable.
This patch only allows monitoring of SLRUs, not tuning. The SLRU sizes
are still fixed (hard-coded in the code) and it's not entirely clear
which of the SLRUs might need a GUC to tune size. In a way, allowing us
to determine that is one of the goals of this patch.
Bump catversion as the patch introduces new functions and system view.
Author: Tomas Vondra
Reviewed-by: Alvaro Herrera
Discussion: https://www.postgresql.org/message-id/flat/20200119143707.gyinppnigokesjok@development
When recovery target is reached and recovery is paused because of
recovery_target_action=pause, executing pg_wal_replay_resume() causes
the standby to promote, i.e., the recovery to end. So, in this case,
the previous message "Execute pg_wal_replay_resume() to continue"
logged was confusing because pg_wal_replay_resume() doesn't cause
the recovery to continue.
This commit improves the message logged when recovery is paused,
and the proper message is output based on what (pg_wal_replay_pause
or recovery_target_action) causes recovery to be paused.
Author: Sergei Kornilov, revised by Fujii Masao
Reviewed-by: Robert Haas
Discussion: https://postgr.es/m/19168211580382043@myt5-b646bde4b8f3.qloud-c.yandex.net
The definitions of the routines defined in xlogarchive.c have been part
of xlog_internal.h which is included by several frontend tools, but all
those routines are only called by the backend. More cleanup could be
done within xlog_internal.h, but that's already a nice cut.
This will help a follow-up patch for pg_rewind where handling of
restore_command is added for frontends.
Author: Alexey Kondratov, Michael Paquier
Reviewed-by: Álvaro Herrera, Alexander Korotkov
Discussion: https://postgr.es/m/a3acff50-5a0d-9a2c-b3b2-ee36168955c1@postgrespro.ru
When certain parameters are changed on a physical replication primary,
this is communicated to standbys using the XLOG_PARAMETER_CHANGE WAL
record. The standby then checks whether its own settings are at least
as big as the ones on the primary. If not, the standby shuts down
with a fatal error.
The correspondence of settings between primary and standby is required
because those settings influence certain shared memory sizings that
are required for processing WAL records that the primary might send.
For example, if the primary sends a prepared transaction, the standby
must have had max_prepared_transaction set appropriately or it won't
be able to process those WAL records.
However, fatally shutting down the standby immediately upon receipt of
the parameter change record might be a bit of an overreaction. The
resources related to those settings are not required immediately at
that point, and might never be required if the activity on the primary
does not exhaust all those resources. If we just let the standby roll
on with recovery, it will eventually produce an appropriate error when
those resources are used.
So this patch relaxes this a bit. Upon receipt of
XLOG_PARAMETER_CHANGE, we still check the settings but only issue a
warning and set a global flag if there is a problem. Then when we
actually hit the resource issue and the flag was set, we issue another
warning message with relevant information. At that point we pause
recovery, so a hot standby remains usable. We also repeat the last
warning message once a minute so it is harder to miss or ignore.
Reviewed-by: Sergei Kornilov <sk@zsrv.org>
Reviewed-by: Masahiko Sawada <masahiko.sawada@2ndquadrant.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/4ad69a4c-cc9b-0dfe-0352-8b1b0cd36c7b@2ndquadrant.com
The parameters primary_conninfo, primary_slot_name and
wal_receiver_create_temp_slot can now be changed with a simple "reload"
signal, no longer requiring a server restart. This is achieved by
signalling the walreceiver process to terminate and having it start
again with the new values.
Thanks to Andres Freund, Kyotaro Horiguchi, Fujii Masao for discussion.
Author: Sergei Kornilov <sk@zsrv.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/19513901543181143@sas1-19a94364928d.qloud-c.yandex.net
Commit 3297308278 gave walreceiver the ability to create and use a
temporary replication slot, and made it controllable by a GUC (enabled
by default) that can be changed with SIGHUP. That's useful but has two
problems: one, it's possible to cause the origin server to fill its disk
if the slot doesn't advance in time; and also there's a disconnect
between state passed down via the startup process and GUCs that
walreceiver reads directly.
We handle the first problem by setting the option to disabled by
default. If the user enables it, its on their head to make sure that
disk doesn't fill up.
We handle the second problem by passing the flag via startup rather than
having walreceiver acquire it directly, and making it PGC_POSTMASTER
(which ensures a walreceiver always has the fresh value). A future
commit can relax this (to PGC_SIGHUP again) by having the startup
process signal walreceiver to shutdown whenever the value changes.
Author: Sergei Kornilov <sk@zsrv.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20200122055510.GH174860@paquier.xyz
Previously if a promotion was triggered while recovery was paused,
the paused state continued. Also recovery could be paused by executing
pg_wal_replay_pause() even while a promotion was ongoing. That is,
recovery pause had higher priority over a standby promotion.
But this behavior was not desirable because most users basically wanted
the recovery to complete as soon as possible and the server to become
the master when they requested a promotion.
This commit changes recovery so that it prefers a promotion over
recovery pause. That is, if a promotion is triggered while recovery
is paused, the paused state ends and a promotion continues. Also
this commit makes recovery pause functions like pg_wal_replay_pause()
throw an error if they are executed while a promotion is ongoing.
Internally, this commit adds new internal function PromoteIsTriggered()
that returns true if a promotion is triggered. Since the name of
this function and the existing function IsPromoteTriggered() are
confusingly similar, the commit changes the name of IsPromoteTriggered()
to IsPromoteSignaled, as more appropriate name.
Author: Fujii Masao
Reviewed-by: Atsushi Torikoshi, Sergei Kornilov
Discussion: https://postgr.es/m/00c194b2-dbbb-2e8a-5b39-13f14048ef0a@oss.nttdata.com
restore_command has only been used until now by the backend, but there
is a pending patch for pg_rewind to make use of that in the frontend.
Author: Alexey Kondratov
Reviewed-by: Andrey Borodin, Andres Freund, Alvaro Herrera, Alexander
Korotkov, Michael Paquier
Discussion: https://postgr.es/m/a3acff50-5a0d-9a2c-b3b2-ee36168955c1@postgrespro.ru
This commit introduces new wait events BackupWaitWalArchive and
RecoveryPause. The former is reported while waiting for the WAL files
required for the backup to be successfully archived. The latter is
reported while waiting for recovery in pause state to be resumed.
Author: Fujii Masao
Reviewed-by: Michael Paquier, Atsushi Torikoshi, Robert Haas
Discussion: https://postgr.es/m/f0651f8c-9c96-9f29-0ff9-80414a15308a@oss.nttdata.com
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Back-patch to 9.5 (all supported versions). This introduces a new WAL
record type, XLOG_GIST_ASSIGN_LSN, without bumping XLOG_PAGE_MAGIC. As
always, update standby systems before master systems. This changes
sizeof(RelationData) and sizeof(IndexStmt), breaking binary
compatibility for affected extensions. (The most recent commit to
affect the same class of extensions was
089e4d405d0f3b94c74a2c6a54357a84a681754b.)
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
The function assumed forkNum=MAIN_FORKNUM and page_std=true, ignoring
the actual arguments. Existing callers passed exactly those values, so
there's no live bug. Back-patch to v12, where the function first
appeared, because another fix needs this.
Discussion: https://postgr.es/m/20191118045434.GA1173436@rfd.leadboat.com
This commit renames RecoveryWalAll and RecoveryWalStream wait events to
RecoveryWalStream and RecoveryRetrieveRetryInterval, respectively,
in order to make the names and what they are more consistent. For example,
previously RecoveryWalAll was reported as a wait event while the recovery
was waiting for WAL from a stream, and which was confusing because the name
was very different from the situation where the wait actually could happen.
The names of macro variables for those wait events also are renamed
accordingly.
This commit also changes the category of RecoveryRetrieveRetryInterval to
Timeout from Activity because the wait event is reported while waiting based
on wal_retrieve_retry_interval.
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Atsushi Torikoshi
Discussion: https://postgr.es/m/124997ee-096a-5d09-d8da-2c7a57d0816e@oss.nttdata.com
We don't need to manually clean up allocations in a SRF's
multi_call_memory_ctx, because the SRF_RETURN_DONE infrastructure
takes care of that (and also ensures that it will happen even if the
function never gets a final call, which simple manual cleanup cannot
do).
Hence, the code removed by this patch is a waste of code and cycles.
Worse, it gives the impression that cleaning up manually is a thing,
which can lead to more serious errors such as those fixed in
commits 085b6b667 and b4570d33a. So we should get rid of it.
These are not quite actual bugs though, so I couldn't muster the
enthusiasm to back-patch. Fix in HEAD only.
Justin Pryzby
Discussion: https://postgr.es/m/20200308173103.GC1357@telsasoft.com
The init_ps_display() arguments were mostly lies by now, so to match
typical usage, just use one argument and let the caller assemble it
from multiple sources if necessary. The only user of the additional
arguments is BackendInitialize(), which was already doing string
assembly on the caller side anyway.
Remove the second argument of set_ps_display() ("force") and just
handle that in init_ps_display() internally.
BackendInitialize() also used to set the initial status as
"authentication", but that was very far from where authentication
actually happened. So now it's set to "initializing" and then
"authentication" just before the actual call to
ClientAuthentication().
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Kuntal Ghosh <kuntalghosh.2007@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/c65e5196-4f04-4ead-9353-6088c19615a3@2ndquadrant.com
Previously, hard links were not used on Windows and Cygwin, but they
support them just fine in currently supported OS versions, so we can
use them there as well.
Since all supported platforms now support hard links, we can remove
the alternative code paths.
Rename durable_link_or_rename() to durable_rename_excl() to make the
purpose more clear without referencing the implementation details.
Discussion: https://www.postgresql.org/message-id/flat/72fff73f-dc9c-4ef4-83e8-d2e60c98df48%402ndquadrant.com
This commit replaces 0 used as an initial value of XLogSource variable,
with XLOG_FROM_ANY. Also this commit changes those variable so that
XLogSource instead of int is used as the type for them. These changes
are for code readability and debugger-friendliness.
Author: Kyotaro Horiguchi
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/20200227.124830.2197604521555566121.horikyota.ntt@gmail.com
At the end of recovery, standby mode is turned off to re-fetch the last
valid record from archive or pg_wal. Previously, if recovery target was
reached and standby mode was turned off while the current WAL source
was stream, recovery could try to retrieve WAL file containing the last
valid record unexpectedly from stream even though not in standby mode.
This caused an assertion failure. That is, the assertion test confirms that
WAL file should not be retrieved from stream if standby mode is not true.
This commit moves back the current WAL source to archive if it's stream
even though not in standby mode, to avoid that assertion failure.
This issue doesn't cause the server to crash when built with assertion
disabled. In this case, the attempt to retrieve WAL file from stream not
in standby mode just fails. And then recovery tries to retrieve WAL file
from archive or pg_wal.
Back-patch to all supported branches.
Author: Kyotaro Horiguchi
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/20200227.124830.2197604521555566121.horikyota.ntt@gmail.com
This commit adds pg_stat_progress_basebackup view that reports
the progress while an application like pg_basebackup is taking
a base backup. This uses the progress reporting infrastructure
added by c16dc1aca5, adding support for streaming base backup.
Bump catversion.
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Amit Langote, Sergei Kornilov
Discussion: https://postgr.es/m/9ed8b801-8215-1f3d-62d7-65bff53f6e94@oss.nttdata.com
The comments in fd.c have long claimed that all file allocations should
go through that module, but in reality that's not always practical.
fd.c doesn't supply APIs for invoking some FD-producing syscalls like
pipe() or epoll_create(); and the APIs it does supply for non-virtual
FDs are mostly insistent on releasing those FDs at transaction end;
and in some cases the actual open() call is in code that can't be made
to use fd.c, such as libpq.
This has led to a situation where, in a modern server, there are likely
to be seven or so long-lived FDs per backend process that are not known
to fd.c. Since NUM_RESERVED_FDS is only 10, that meant we had *very*
few spare FDs if max_files_per_process is >= the system ulimit and
fd.c had opened all the files it thought it safely could. The
contrib/postgres_fdw regression test, in particular, could easily be
made to fall over by running it under a restrictive ulimit.
To improve matters, invent functions Acquire/Reserve/ReleaseExternalFD
that allow outside callers to tell fd.c that they have or want to allocate
a FD that's not directly managed by fd.c. Add calls to track all the
fixed FDs in a standard backend session, so that we are honestly
guaranteeing that NUM_RESERVED_FDS FDs remain unused below the EMFILE
limit in a backend's idle state. The coding rules for these functions say
that there's no need to call them in code that just allocates one FD over
a fairly short interval; we can dip into NUM_RESERVED_FDS for such cases.
That means that there aren't all that many places where we need to worry.
But postgres_fdw and dblink must use this facility to account for
long-lived FDs consumed by libpq connections. There may be other places
where it's worth doing such accounting, too, but this seems like enough
to solve the immediate problem.
Internally to fd.c, "external" FDs are limited to max_safe_fds/3 FDs.
(Callers can choose to ignore this limit, but of course it's unwise
to do so except for fixed file allocations.) I also reduced the limit
on "allocated" files to max_safe_fds/3 FDs (it had been max_safe_fds/2).
Conceivably a smarter rule could be used here --- but in practice,
on reasonable systems, max_safe_fds should be large enough that this
isn't much of an issue, so KISS for now. To avoid possible regression
in the number of external or allocated files that can be opened,
increase FD_MINFREE and the lower limit on max_files_per_process a
little bit; we now insist that the effective "ulimit -n" be at least 64.
This seems like pretty clearly a bug fix, but in view of the lack of
field complaints, I'll refrain from risking a back-patch.
Discussion: https://postgr.es/m/E1izCmM-0005pV-Co@gemulon.postgresql.org
We used to strategically place newlines after some function call left
parentheses to make pgindent move the argument list a few chars to the
left, so that the whole line would fit under 80 chars. However,
pgindent no longer does that, so the newlines just made the code
vertically longer for no reason. Remove those newlines, and reflow some
of those lines for some extra naturality.
Reviewed-by: Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/20200129200401.GA6303@alvherre.pgsql
Before, if a recovery target is configured, but the archive ended
before the target was reached, recovery would end and the server would
promote without further notice. That was deemed to be pretty wrong.
With this change, if the recovery target is not reached, it is a fatal
error.
Based-on-patch-by: Leif Gunnar Erlandsen <leif@lako.no>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/993736dd3f1713ec1f63fc3b653839f5@lako.no
The signature of XLogReadRecord() required the caller to pass the starting
WAL position as argument, or InvalidXLogRecPtr to continue reading at the
end of previous record. That's slightly awkward to the callers, as most
of them don't want to randomly jump around in the WAL stream, but start
reading at one position and then read everything from that point onwards.
Remove the 'RecPtr' argument and add a new function XLogBeginRead() to
specify the starting position instead. That's more convenient for the
callers. Also, xlogreader holds state that is reset when you change the
starting position, so having a separate function for doing that feels like
a more natural fit.
This changes XLogFindNextRecord() function so that it doesn't reset the
xlogreader's state to what it was before the call anymore. Instead, it
positions the xlogreader to the found record, like XLogBeginRead().
Reviewed-by: Kyotaro Horiguchi, Alvaro Herrera
Discussion: https://www.postgresql.org/message-id/5382a7a3-debe-be31-c860-cb810c08f366%40iki.fi
Detection of WAL records having references to invalid pages
during recovery causes PostgreSQL to raise a PANIC-level error,
aborting the recovery. Setting ignore_invalid_pages to on causes
the system to ignore those WAL records (but still report a warning),
and continue recovery. This behavior may cause crashes, data loss,
propagate or hide corruption, or other serious problems.
However, it may allow you to get past the PANIC-level error,
to finish the recovery, and to cause the server to start up.
Author: Fujii Masao
Reviewed-by: Michael Paquier
Discussion: https://www.postgresql.org/message-id/CAHGQGwHCK6f77yeZD4MHOnN+PaTf6XiJfEB+Ce7SksSHjeAWtg@mail.gmail.com
This feature allows the vacuum to leverage multiple CPUs in order to
process indexes. This enables us to perform index vacuuming and index
cleanup with background workers. This adds a PARALLEL option to VACUUM
command where the user can specify the number of workers that can be used
to perform the command which is limited by the number of indexes on a
table. Specifying zero as a number of workers will disable parallelism.
This option can't be used with the FULL option.
Each index is processed by at most one vacuum process. Therefore parallel
vacuum can be used when the table has at least two indexes.
The parallel degree is either specified by the user or determined based on
the number of indexes that the table has, and further limited by
max_parallel_maintenance_workers. The index can participate in parallel
vacuum iff it's size is greater than min_parallel_index_scan_size.
Author: Masahiko Sawada and Amit Kapila
Reviewed-by: Dilip Kumar, Amit Kapila, Robert Haas, Tomas Vondra,
Mahendra Singh and Sergei Kornilov
Tested-by: Mahendra Singh and Prabhat Sahu
Discussion:
https://postgr.es/m/CAD21AoDTPMgzSkV4E3SFo1CH_x50bf5PqZFQf4jmqjk-C03BWg@mail.gmail.comhttps://postgr.es/m/CAA4eK1J-VoR9gzS5E75pcD-OH0mEyCdp8RihcwKrcuw7J-Q0+w@mail.gmail.com
Make the value null only at pg_stat_activity-output time, as suggested
by Tom Lane, instead of messing with the internal state. This should
appease buildfarm members with force_parallel_mode=regress, which are
running parallel queries on logical replication walsenders.
The fact that walsenders can run parallel queries should perhaps be
studied more carefully, but for the moment let's get rid of the red
blots in buildfarm.
Backpatch to pg10, like the previous commit.
Discussion: https://postgr.es/m/30804.1578438763@sss.pgh.pa.us
Returning a non-NULL time is pointless, sinc a walsender is not a
process that would be running normal transactions anyway, but the code
was unintentionally exposing the process start time intermittently,
which was not only bogus but it also confused monitoring systems looking
for idle transactions. Fix by avoiding all updates in walsenders.
Backpatch to 11, where walsenders started appearing in pg_stat_activity.
Reported-by: Tomas Vondra
Discussion: https://postgr.es/m/20191209234409.exe7osmyalwkt5j4@development
Using \ is unnecessary and ugly, so remove that. While at it, stitch
the literals back into a single line: we've long discouraged splitting
error message literals even when they go past the 80 chars line limit,
to improve greppability.
Leave contrib/tablefunc alone.
Discussion: https://postgr.es/m/20191223195156.GA12271@alvherre.pgsql
The previous coding imagined that it could call before_shmem_exit()
when a non-exclusive backup began and then remove the previously-added
handler by calling cancel_before_shmem_exit() when that backup
ended. However, this only works provided that nothing else in the
system has registered a before_shmem_exit() hook in the interim,
because cancel_before_shmem_exit() is documented to remove a callback
only if it is the latest callback registered. It also only works
if nothing can ERROR out between the time that sessionBackupState
is reset and the time that cancel_before_shmem_exit(), which doesn't
seem to be strictly true.
To fix, leave the handler installed for the lifetime of the session,
arrange to install it just once, and teach it to quietly do nothing if
there isn't a non-exclusive backup in process.
This is a bug, but for now I'm not going to back-patch, because the
consequences are minor. It's possible to cause a spurious warning
to be generated, but that doesn't really matter. It's also possible
to trigger an assertion failure, but production builds shouldn't
have assertions enabled.
Patch by me, reviewed by Kyotaro Horiguchi, Michael Paquier (who
preferred a different approach, but got outvoted), Fujii Masao,
and Tom Lane, and with comments by various others.
Discussion: http://postgr.es/m/CA+TgmobMjnyBfNhGTKQEDbqXYE3_rXWpc4CM63fhyerNCes3mA@mail.gmail.com
This changes the routines in charge of recycling WAL segments past the
last redo LSN to not use anymore "RedoRecPtr" as a local variable, which
is also available in the context of the session as a static declaration,
replacing it with "lastredoptr". This confusion has been introduced by
d9fadbf, so backpatch down to v11 like the other commit.
Thanks to Tom Lane, Robert Haas, Alvaro Herrera, Mark Dilger and Kyotaro
Horiguchi for the input provided.
Author: Ranier Vilela
Discussion: https://postgr.es/m/MN2PR18MB2927F7B5F690065E1194B258E35D0@MN2PR18MB2927.namprd18.prod.outlook.com
Backpatch-through: 11
This Assert thought that an overflowed transaction can never get registered
for the group update. But that is not true, because even when the number
of children for a transaction got reduced, the overflow flag is not
changed. And, for group update, we only care about the current number of
children for a transaction that is being committed.
Based on comments by Andres Freund, remove a redundant Assert in
TransactionIdSetPageStatus as we already had a static Assert for the same
condition a few lines earlier.
Reported-by: Vignesh C
Author: Dilip Kumar
Reviewed-by: Amit Kapila
Backpatch-through: 11
Discussion: https://postgr.es/m/CAFiTN-s5=uJw-Z6JC9gcqtBSjXsrHnU63PXBrA=pnBjqnkm5UA@mail.gmail.com
recoveryDelayUntilTime was introduced by commit 36da3cfb45 as a global
because its method of operation was devilishly intrincate. Commit
c945af80cf removed all that complexity and could have turned it into a
local variable, but didn't. Do so now.
Discussion: https://postgr.es/m/20191213200751.GA10731@alvherre.pgsql
Reviewed-by: Michaël Paquier, Daniel Gustafsson
Error messages referring to incorrect WAL segment names could have been
generated for a fsync() failure or when creating a new segment at the
end of recovery.
XLogFileNameP() is a wrapper routine able to build a palloc'd string for
a WAL segment name, which is used for error string generation. There
were several code paths where it gets called in a critical section,
where memory allocation is not allowed. This results in triggering
an assertion failure instead of generating the wanted error message.
Another, more annoying, problem is that if the allocation to generate
the WAL segment name fails on OOM, then the failure would be escalated
to a PANIC.
This removes the routine and all its callers are replaced with a logic
using a fixed-size buffer. This way, all the existing mistakes are
fixed and future ones are prevented.
Author: Masahiko Sawada
Reviewed-by: Michael Paquier, Álvaro Herrera
Discussion: https://postgr.es/m/CA+fd4k5gC9H4uoWMLg9K_QfNrnkkdEw+-AFveob9YX7z8JnKTA@mail.gmail.com
XLogReader, walsender and pg_waldump all had their own routines to read
data from WAL files to memory, with slightly different approaches
according to the particular conditions of each environment. There's a
lot of commonality, so we can refactor that into a single routine
WALRead in XLogReader, and move the differences to a separate (simpler)
callback that just opens the next WAL-segment. This results in a
clearer (ahem) code flow.
The error reporting needs are covered by filling in a new error-info
struct, WALReadError, and it's the caller's responsibility to act on it.
The backend has WALReadRaiseError() to do so.
We no longer ever need to seek in this interface; switch to using
pg_pread().
Author: Antonin Houska, with contributions from Álvaro Herrera
Reviewed-by: Michaël Paquier, Kyotaro Horiguchi
Discussion: https://postgr.es/m/14984.1554998742@spoje.net
If LISTEN is the only action in a serializable-mode transaction,
and the session was not previously listening, and the notify queue
is not empty, predicate.c reported an assertion failure. That
happened because we'd acquire the transaction's initial snapshot
during PreCommit_Notify, which was called *after* predicate.c
expects any such snapshot to have been established.
To fix, just swap the order of the PreCommit_Notify and
PreCommit_CheckForSerializationFailure calls during CommitTransaction.
This will imply holding the notify-insertion lock slightly longer,
but the difference could only be meaningful in serializable mode,
which is an expensive option anyway.
It appears that this is just an assertion failure, with no
consequences in non-assert builds. A snapshot used only to scan
the notify queue could not have been involved in any serialization
conflicts, so there would be nothing for
PreCommit_CheckForSerializationFailure to do except assign it a
prepareSeqNo and set the SXACT_FLAG_PREPARED flag. And given no
conflicts, neither of those omissions affect the behavior of
ReleasePredicateLocks. This admittedly once-over-lightly analysis
is backed up by the lack of field reports of trouble.
Per report from Mark Dilger. The bug is old, so back-patch to all
supported branches; but the new test case only goes back to 9.6,
for lack of adequate isolationtester infrastructure before that.
Discussion: https://postgr.es/m/3ac7f397-4d5f-be8e-f354-440020675694@gmail.com
Discussion: https://postgr.es/m/13881.1574557302@sss.pgh.pa.us
This commit changes xact_desc() so that it reports the detail information about
PREPARE TRANSACTION record, like GID (global transaction identifier),
timestamp at prepare transaction, delete-on-abort/commit relations,
XID of subtransactions, and invalidation messages. These are helpful
when diagnosing 2PC-related troubles.
Author: Fujii Masao
Reviewed-by: Michael Paquier, Andrey Lepikhov, Kyotaro Horiguchi, Julien Rouhaud, Alvaro Herrera
Discussion: https://postgr.es/m/CAHGQGwEvhASad4JJnCv=0dW2TJypZgW_Vpb-oZik2a3utCqcrA@mail.gmail.com
If the passed in xid is the current top transaction, we can do a fast
check and exit early. This should work well for the current heap but
also works very well for proposed AMs that don't use a separate xid
for subtransactions.
Author: Ashwin Agrawal, based on a suggestion from Andres Freund
Reviewed-by: Thomas Munro
Discussion: https://postgr.es/m/CALfoeiv0k3hkEb3Oqk%3DziWqtyk2Jys1UOK5hwRBNeANT_yX%2Bng%40mail.gmail.com
If there is the WAL page that the continuation WAL record just fits within
(i.e., the continuation record ends just at the end of the page) and
the LSN in such page is specified with -s option, previously pg_waldump
caused an assertion failure. The cause of this assertion failure was that
XLogFindNextRecord() that pg_waldump -s calls mistakenly handled
such special WAL page.
This commit changes XLogFindNextRecord() so that it can handle
such WAL page correctly.
Back-patch to all supported versions.
Author: Andrey Lepikhov
Reviewed-by: Fujii Masao, Michael Paquier
Discussion: https://postgr.es/m/99303554-5dd5-06e6-f943-b3005ccd6edd@postgrespro.ru
When maintaining or merging patches, one of the most common sources
for conflicts are the list of objects in makefiles. Especially when
the split across lines has been changed on both sides, which is
somewhat common due to attempting to stay below 80 columns, those
conflicts are unnecessarily laborious to resolve.
By splitting, and alphabetically sorting, OBJS style lines into one
object per line, conflicts should be less frequent, and easier to
resolve when they still occur.
Author: Andres Freund
Discussion: https://postgr.es/m/20191029200901.vww4idgcxv74cwes@alap3.anarazel.de
9155580 has changed the value of the first fake LSN for unlogged
relations from 1 to FirstNormalUnloggedLSN (aka 1000), GiST requiring a
non-zero LSN on some pages to allow an interlocking logic to work, but
its value was still initialized to 1 at the beginning of recovery or
after running pg_resetwal. This fixes the initialization for both code
paths.
Author: Takayuki Tsunakawa
Reviewed-by: Dilip Kumar, Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/OSBPR01MB2503CE851940C17DE44AE3D9FE6F0@OSBPR01MB2503.jpnprd01.prod.outlook.com
Backpatch-through: 12
recovery_min_apply_delay parameter is intended for use with streaming
replication deployments. However, the document clearly explains that
the parameter will be honored in all cases if it's specified. So it should
take effect even if in archive recovery. But, previously, archive recovery
with recovery_min_apply_delay enabled always failed, and caused assertion
failure if --enable-caasert is enabled.
The cause of this problem is that; the ownership of recoveryWakeupLatch
that recovery_min_apply_delay uses was taken only when standby mode
is requested. So unowned latch could be used in archive recovery, and
which caused the failure.
This commit changes recovery code so that the ownership of
recoveryWakeupLatch is taken even in archive recovery. Which prevents
archive recovery with recovery_min_apply_delay from failing.
Back-patch to v9.4 where recovery_min_apply_delay was added.
Author: Fujii Masao
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CAHGQGwEyD6HdZLfdWc+95g=VQFPR4zQL4n+yHxQgGEGjaSVheQ@mail.gmail.com
In v11 or before, this setting could not take effect in crash recovery
because it's specified in recovery.conf and crash recovery always
starts without recovery.conf. But commit 2dedf4d9a8 integrated
recovery.conf into postgresql.conf and which unexpectedly allowed
this setting to take effect even in crash recovery. This is definitely
not good behavior.
To fix the issue, this commit makes crash recovery always ignore
recovery_min_apply_delay setting.
Back-patch to v12 where the issue was added.
Author: Fujii Masao
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CAHGQGwEyD6HdZLfdWc+95g=VQFPR4zQL4n+yHxQgGEGjaSVheQ@mail.gmail.com
Discussion: https://postgr.es/m/e445616d-023e-a268-8aa1-67b8b335340c@pgmasters.net
In v11 or before, those settings could not take effect in crash recovery
because they are specified in recovery.conf and crash recovery always
starts without recovery.conf. But commit 2dedf4d9a8 integrated
recovery.conf into postgresql.conf and which unexpectedly allowed
those settings to take effect even in crash recovery. This is definitely
not good behavior.
To fix the issue, this commit makes crash recovery always ignore
restore_command and recovery_end_command settings.
Back-patch to v12 where the issue was added.
Author: Fujii Masao
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/e445616d-023e-a268-8aa1-67b8b335340c@pgmasters.net
cbc55da has reworked the order of some actions at the end of archive
recovery. Unfortunately this overlooked the fact that the startup
process needs to remove RECOVERYXLOG (for temporary WAL segment newly
recovered from archives) and RECOVERYHISTORY (for temporary history
file) at this step, leaving the files around even after recovery ended.
Backpatch to 9.5, like the previous commit.
Author: Sawada Masahiko
Reviewed-by: Fujii Masao, Michael Paquier
Discussion: https://postgr.es/m/CAD21AoBO_eDQub6zojFnWtnmutRBWvYf7=cW4Hsqj+U_R26w3Q@mail.gmail.com
Backpatch-through: 9.5
In v11 or before, recovery target settings could not take effect in
crash recovery because they are specified in recovery.conf and
crash recovery always starts without recovery.conf. But commit
2dedf4d9a8 integrated recovery.conf into postgresql.conf and
which unexpectedly allowed recovery target settings to take effect
even in crash recovery. This is definitely not good behavior.
To fix the issue, this commit makes crash recovery always ignore
recovery target settings.
Back-patch to v12.
Author: Peter Eisentraut
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/e445616d-023e-a268-8aa1-67b8b335340c@pgmasters.net
The state-tracking of WAL reading in various places was pretty messy,
mostly because the ancient physical-replication WAL reading code wasn't
using the XLogReader abstraction. This led to some untidy code. Make
it prettier by creating two additional supporting structs,
WALSegmentContext and WALOpenSegment which keep track of WAL-reading
state. This makes code cleaner, as well as supports more future
cleanup.
Author: Antonin Houska
Reviewed-by: Álvaro Herrera and (older versions) Robert Haas
Discussion: https://postgr.es/m/14984.1554998742@spoje.net
When using COMMIT AND CHAIN or ROLLBACK AND CHAIN not in an explicit
transaction block, the previous implementation would leave a
transaction block active in the ROLLBACK case but not the COMMIT case.
To fix for now, error out when using these commands not in an explicit
transaction block. This restriction could be lifted if a sensible
definition and implementation is found.
Bug: #15977
Author: fn ln <emuser20140816@gmail.com>
Reviewed-by: Fabien COELHO <coelho@cri.ensmp.fr>
Previously even if postmaster died and WaitLatch() woke up with that event
while pg_promote() was waiting for the standby promotion to finish,
pg_promote() did nothing special and kept waiting until timeout occurred.
This could cause a busy loop.
This patch make pg_promote() return false immediately when postmaster
dies, to avoid such a busy loop.
Back-patch to v12 where pg_promote() was added.
Author: Fujii Masao
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CAHGQGwEs9ROgSp+QF+YdDU+xP8W=CY1k-_Ov-d_Z3JY+to3eXA@mail.gmail.com
detoast.c/h contain functions required to detoast a datum, partially
or completely, plus a few other utility functions for examining the
size of toasted datums.
toast_internals.c/h contain functions that are used internally to the
TOAST subsystem but which (mostly) do not need to be accessed from
outside.
heaptoast.c/h contains code that is intrinsically specific to the
heap AM, either because it operates on HeapTuples or is based on the
layout of a heap page.
detoast.c and toast_internals.c are placed in
src/backend/access/common rather than src/backend/access/heap. At
present, both files still have dependencies on the heap, but that will
be improved in a future commit.
Patch by me, reviewed and tested by Prabhat Sabu, Thomas Munro,
Andres Freund, and Álvaro Herrera.
Discussion: http://postgr.es/m/CA+TgmoZv-=2iWM4jcw5ZhJeL18HF96+W1yJeYrnGMYdkFFnEpQ@mail.gmail.com
This function is only used by xlogreader.c itself, so there's no need to
export it. It was introduced by commit 3b02ea4f07 with the apparent
intention that it could be used externally, but I couldn't find any
external code calling it.
I (Álvaro) couldn't resist the urge to sort nearby function prototypes
properly while at it.
Author: Antonin Houska
Discussion: https://postgr.es/m/14984.1554998742@spoje.net
This is numbered take 7, and addresses a set of issues around:
- Fixes for typos and incorrect reference names.
- Removal of unneeded comments.
- Removal of unreferenced functions and structures.
- Fixes regarding variable name consistency.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/10bfd4ac-3e7c-40ab-2b2e-355ed15495e8@gmail.com
In order to be able to work with FullTransactionId values during replay
without increasing the size of the WAL, infer the epoch. In general we
can't do that safely, but during replay we can because we know that
nextFullXid can't advance concurrently.
Prevent frontend code from seeing this new function, due to the above
restriction. Perhaps in future it will be possible to extract the value
entirely from independent WAL records, and then this restriction can be
lifted.
Author: Thomas Munro, based on earlier code from Andres Freund
Discussion: https://postgr.es/m/CA%2BhUKG%2BmLmuDjMi6o1dxkKvGRL56Y2Rz%2BiXAcrZV03G9ZuFQ8Q%40mail.gmail.com
This addresses a couple of issues in the code:
- Typos and inconsistencies in comments and function declarations.
- Removal of unreferenced function declarations.
- Removal of unnecessary compile flags.
- A cleanup error in regressplans.sh.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/0c991fdf-2670-1997-c027-772a420c4604@gmail.com
Because there is no portable int64/uint64 format specifier and we
can't stick macros like INT64_FORMAT into the middle of a translatable
string, we have been using various workarounds that put the number to
be printed into a string buffer first. Now that we always use our own
sprintf(), we can rely on %lld and %llu to work, so we can use those.
This patch undoes this workaround in a few places where it was
egregiously verbose.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/CAH2-Wz%3DWbNxc5ob5NJ9yqo2RMJ0q4HXDS30GVCobeCvC9A1L9A%40mail.gmail.com
Instead of calling pg_lsn_in() in check_recovery_target_lsn and
timestamptz_in() in check_recovery_target_time, reorganize the
respective code so that we don't raise any errors in the check hooks.
The previous code tried to use PG_TRY/PG_CATCH to handle errors in a
way that is not safe, so now the code contains no ereport() calls and
can operate safely within the GUC error handling system.
Moreover, since the interpretation of the recovery_target_time string
may depend on the time zone, we cannot do the final processing of that
string until all the GUC processing is done. Instead,
check_recovery_target_time() now does some parsing for syntax
checking, but the actual conversion to a timestamptz value is done
later in the recovery code that uses it.
Reported-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/20190611061115.njjwkagvxp4qujhp%40alap3.anarazel.de
There were a number of issues in the recent commits which include typos,
code and comments mismatch, leftover function declarations. Fix them.
Reported-by: Alexander Lakhin
Author: Alexander Lakhin, Amit Kapila and Amit Langote
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/ef0c0232-0c1d-3a35-63d4-0ebd06e31387@gmail.com
This is still using the 2.0 version of pg_bsd_indent.
I thought it would be good to commit this separately,
so as to document the differences between 2.0 and 2.1 behavior.
Discussion: https://postgr.es/m/16296.1558103386@sss.pgh.pa.us
The right way for IsCatalogRelation/Class to behave is to return true
for OIDs less than FirstBootstrapObjectId (not FirstNormalObjectId),
without any of the ad-hoc fooling around with schema membership.
The previous code was wrong because (1) it claimed that
information_schema tables were not catalog relations but their toast
tables were, which is silly; and (2) if you dropped and recreated
information_schema, which is a supported operation, the behavior
changed. That's even sillier. With this definition, "catalog
relations" are exactly the ones traceable to the postgres.bki data,
which seems like what we want.
With this simplification, we don't actually need access to the pg_class
tuple to identify a catalog relation; we only need its OID. Hence,
replace IsCatalogClass with "IsCatalogRelationOid(oid)". But keep
IsCatalogRelation as a convenience function.
This allows fixing some arguably-wrong semantics in contrib/sepgsql and
ReindexRelationConcurrently, which were using an IsSystemNamespace test
where what they really should be using is IsCatalogRelationOid. The
previous coding failed to protect toast tables of system catalogs, and
also was not on board with the general principle that user-created tables
do not become catalogs just by virtue of being renamed into pg_catalog.
We can also get rid of a messy hack in ReindexMultipleTables.
While we're at it, also rename IsSystemNamespace to IsCatalogNamespace,
because the previous name invited confusion with the more expansive
semantics used by IsSystemRelation/Class.
Also improve the comments in catalog.c.
There are a few remaining places in replication-related code that are
special-casing OIDs below FirstNormalObjectId. I'm inclined to think
those are wrong too, and if there should be any special case it should
just extend to FirstBootstrapObjectId. But first we need to debate
whether a FOR ALL TABLES publication should include information_schema.
Discussion: https://postgr.es/m/21697.1557092753@sss.pgh.pa.us
Discussion: https://postgr.es/m/15150.1557257111@sss.pgh.pa.us
This feature was using a process local map to track the first few blocks
in the relation. The map was reset each time we get the block with enough
freespace. It was discussed that it would be better to track this map on
a per-relation basis in relcache and then invalidate the same whenever
vacuum frees up some space in the page or when FSM is created. The new
design would be better both in terms of API design and performance.
List of commits reverted, in reverse chronological order:
06c8a5090e Improve code comments in b0eaa4c51b.
13e8643bfc During pg_upgrade, conditionally skip transfer of FSMs.
6f918159a9 Add more tests for FSM.
9c32e4c350 Clear the local map when not used.
29d108cdec Update the documentation for FSM behavior..
08ecdfe7e5 Make FSM test portable.
b0eaa4c51b Avoid creation of the free space map for small heap relations.
Discussion: https://postgr.es/m/20190416180452.3pm6uegx54iitbt5@alap3.anarazel.de
Transient files and wait events get normally cleaned up when seeing an
exception (be it in the context of a transaction for a backend or
another process like the checkpointer), hence there is little point in
complicating error code paths to do this work. This shaves a bit of
code, and removes some extra handling with errno which needed to be
preserved during the cleanup steps done.
Reported-by: Masahiko Sawada
Author: Michael Paquier
Reviewed-by: Tom Lane, Masahiko Sawada
Discussion: https://postgr.es/m/CAD21AoDhHYVq5KkXfkaHhmjA-zJYj-e4teiRAJefvXuKJz1tKQ@mail.gmail.com
Commit ad308058 switched to returning a FullTransactionId, but
failed to load the potentially updated value in the case where
xidVacLimit is reached and we release and reacquire the lock.
Repair, closing bug #15727.
While reviewing that commit, also fix the size computation used
by EstimateTransactionStateSize() and switch to the mul_size()
macro traditionally used in such expressions.
Author: Thomas Munro
Reported-by: Roman Zharkov
Discussion: https://postgr.es/m/15727-0be246e7d852d229%40postgresql.org
transaction.
The transaction that is initiated by the parallel worker to cooperate
with the actual transaction started by the main backend to complete the
query execution should not be counted as a separate transaction. The
other internal transactions started and committed by the parallel worker
are still counted as separate transactions as we that is what we do in
other places like autovacuum.
This will partially fix the bloat in transaction stats due to additional
transactions performed by parallel workers. For a complete fix, we need to
decide how we want to show all the transactions that are started internally
for various operations and that is a matter of separate patch.
Reported-by: Haribabu Kommi
Author: Haribabu Kommi
Reviewed-by: Amit Kapila, Jamison Kirk and Rahila Syed
Backpatch-through: 9.6
Discussion: https://postgr.es/m/CAJrrPGc9=jKXuScvNyQ+VNhO0FZk7LLAShAJRyZjnedd2D61EQ@mail.gmail.com
Previously, md.c and checkpointer.c were tightly integrated so that
fsync calls could be handed off and processed in the background.
Introduce a system of callbacks and file tags, so that other modules
can hand off fsync work in the same way.
For now only md.c uses the new interface, but other users are being
proposed. Since there may be use cases that are not strictly SMGR
implementations, use a new function table for sync handlers rather
than extending the traditional SMGR one.
Instead of using a bitmapset of segment numbers for each RelFileNode
in the checkpointer's hash table, make the segment number part of the
key. This requires sending explicit "forget" requests for every
segment individually when relations are dropped, but suits the file
layout schemes of proposed future users better (ie sparse or high
segment numbers).
Author: Shawn Debnath and Thomas Munro
Reviewed-by: Thomas Munro, Andres Freund
Discussion: https://postgr.es/m/CAEepm=2gTANm=e3ARnJT=n0h8hf88wqmaZxk0JYkxw+b21fNrw@mail.gmail.com
This is useful to obtain a view of the different transaction types in an
application, regardless of the durations of the statements each runs.
Author: Adrien Nayrat
Reviewed-by: Masahiko Sawada, Hayato Kuroda, Andres Freund
Instead of WAL-logging every modification during the build separately,
first build the index without any WAL-logging, and make a separate pass
through the index at the end, to write all pages to the WAL. This
significantly reduces the amount of WAL generated, and is usually also
faster, despite the extra I/O needed for the extra scan through the index.
WAL generated this way is also faster to replay.
For GiST, the LSN-NSN interlock makes this a little tricky. All pages must
be marked with a valid (i.e. non-zero) LSN, so that the parent-child
LSN-NSN interlock works correctly. We now use magic value 1 for that during
index build. Change the fake LSN counter to begin from 1000, so that 1 is
safely smaller than any real or fake LSN. 2 would've been enough for our
purposes, but let's reserve a bigger range, in case we need more special
values in the future.
Author: Anastasia Lubennikova, Andrey V. Lepikhov
Reviewed-by: Heikki Linnakangas, Dmitry Dolgov
When asked for a slice of a TOAST entry, decompress enough to return the
slice instead of decompressing the entire object.
For use cases where the slice is at, or near, the beginning of the entry,
this avoids a lot of unnecessary decompression work.
This changes the signature of pglz_decompress() by adding a boolean to
indicate if it's ok for the call to finish before consuming all of the
source or destination buffers.
Author: Paul Ramsey
Reviewed-By: Rafia Sabih, Darafei Praliaskouski, Regina Obe
Discussion: https://postgr.es/m/CACowWR07EDm7Y4m2kbhN_jnys%3DBBf9A6768RyQdKm_%3DNpkcaWg%40mail.gmail.com
On at least ZFS, it can be beneficial to create new WAL files every
time and not to bother zero-filling them. Since it's not clear which
other filesystems might benefit from one or both of those things,
add individual GUCs to control those two behaviors independently and
make only very general statements in the docs.
Author: Jerry Jelinek, with some adjustments by Thomas Munro
Reviewed-by: Alvaro Herrera, Andres Freund, Tomas Vondra, Robert Haas and others
Discussion: https://postgr.es/m/CACPQ5Fo00QR7LNAcd1ZjgoBi4y97%2BK760YABs0vQHH5dLdkkMA%40mail.gmail.com
This unifies the various ad hoc logging (message printing, error
printing) systems used throughout the command-line programs.
Features:
- Program name is automatically prefixed.
- Message string does not end with newline. This removes a common
source of inconsistencies and omissions.
- Additionally, a final newline is automatically stripped, simplifying
use of PQerrorMessage() etc., another common source of mistakes.
- I converted error message strings to use %m where possible.
- As a result of the above several points, more translatable message
strings can be shared between different components and between
frontends and backend, without gratuitous punctuation or whitespace
differences.
- There is support for setting a "log level". This is not meant to be
user-facing, but can be used internally to implement debug or
verbose modes.
- Lazy argument evaluation, so no significant overhead if logging at
some level is disabled.
- Some color in the messages, similar to gcc and clang. Set
PG_COLOR=auto to try it out. Some colors are predefined, but can be
customized by setting PG_COLORS.
- Common files (common/, fe_utils/, etc.) can handle logging much more
simply by just using one API without worrying too much about the
context of the calling program, requiring callbacks, or having to
pass "progname" around everywhere.
- Some programs called setvbuf() to make sure that stderr is
unbuffered, even on Windows. But not all programs did that. This
is now done centrally.
Soft goals:
- Reduces vertical space use and visual complexity of error reporting
in the source code.
- Encourages more deliberate classification of messages. For example,
in some cases it wasn't clear without analyzing the surrounding code
whether a message was meant as an error or just an info.
- Concepts and terms are vaguely aligned with popular logging
frameworks such as log4j and Python logging.
This is all just about printing stuff out. Nothing affects program
flow (e.g., fatal exits). The uses are just too varied to do that.
Some existing code had wrappers that do some kind of print-and-exit,
and I adapted those.
I tried to keep the output mostly the same, but there is a lot of
historical baggage to unwind and special cases to consider, and I
might not always have succeeded. One significant change is that
pg_rewind used to write all error messages to stdout. That is now
changed to stderr.
Reviewed-by: Donald Dong <xdong@csumb.edu>
Reviewed-by: Arthur Zakirov <a.zakirov@postgrespro.ru>
Discussion: https://www.postgresql.org/message-id/flat/6a609b43-4f57-7348-6480-bd022f924310@2ndquadrant.com
Especially, warn about the hazards of mishandling the backup_label
file. Adjust a couple of server messages to be more clear about
the hazards associated with removing backup_label files, too.
David Steele and Robert Haas, reviewed by Laurenz Albe, Martín
Marqués, Peter Eisentraut, and Magnus Hagander.
Discussion: http://postgr.es/m/7d85c387-000e-16f0-e00b-50bf83c22127@pgmasters.net
Provide GetTopFullTransactionId() and GetCurrentFullTransactionId().
The intended users of these interfaces are access methods that use
xids for visibility checks but don't want to have to go back and
"freeze" existing references some time later before the 32 bit xid
counter wraps around.
Use a new struct to serialize the transaction state for parallel
query, because FullTransactionId doesn't fit into the previous
serialization scheme very well.
Author: Thomas Munro
Reviewed-by: Heikki Linnakangas
Discussion: https://postgr.es/m/CAA4eK1%2BMv%2Bmb0HFfWM9Srtc6MVe160WFurXV68iAFMcagRZ0dQ%40mail.gmail.com
Instead of inferring epoch progress from xids and checkpoints,
introduce a 64 bit FullTransactionId type and use it to track xid
generation. This fixes an unlikely bug where the epoch is reported
incorrectly if the range of active xids wraps around more than once
between checkpoints.
The only user-visible effect of this commit is to correct the epoch
used by txid_current() and txid_status(), also visible with
pg_controldata, in those rare circumstances. It also creates some
basic infrastructure so that later patches can use 64 bit
transaction IDs in more places.
The new type is a struct that we pass by value, as a form of strong
typedef. This prevents the sort of accidental confusion between
TransactionId and FullTransactionId that would be possible if we
were to use a plain old uint64.
Author: Thomas Munro
Reported-by: Amit Kapila
Reviewed-by: Andres Freund, Tom Lane, Heikki Linnakangas
Discussion: https://postgr.es/m/CAA4eK1%2BMv%2Bmb0HFfWM9Srtc6MVe160WFurXV68iAFMcagRZ0dQ%40mail.gmail.com
Add command variants COMMIT AND CHAIN and ROLLBACK AND CHAIN, which
start new transactions with the same transaction characteristics as the
just finished one, per SQL standard.
Support for transaction chaining in PL/pgSQL is also added. This
functionality is especially useful when running COMMIT in a loop in
PL/pgSQL.
Reviewed-by: Fabien COELHO <coelho@cri.ensmp.fr>
Discussion: https://www.postgresql.org/message-id/flat/28536681-324b-10dc-ade8-ab46f7645a5a@2ndquadrant.com
ce6afc6 has begun the refactoring work by plugging pg_rewind into a
central routine to update the control file, and left around two extra
copies, with one in xlog.c for the backend and one in pg_resetwal.c. By
adding an extra option to the central routine in controldata_utils.c to
control if a flush of the control file needs to be done, it is proving
to be straight-forward to make xlog.c and pg_resetwal.c use the central
code path at the condition of moving the wait event tracking there.
Hence, this allows to have only one central code path to update the
control file, shaving the code from the duplicates.
This refactoring actually fixes a problem in pg_resetwal. Previously,
the control file was first removed before being recreated. So if a
crash happened between the moment the file was removed and the moment
the file was created, then it would have been possible to not have a
control file anymore in the database folder.
Author: Fabien Coelho
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/alpine.DEB.2.21.1903170935210.2506@lancre
Previously, the SERIALIZABLE isolation level prevented parallel query
from being used. Allow the two features to be used together by
sharing the leader's SERIALIZABLEXACT with parallel workers.
An extra per-SERIALIZABLEXACT LWLock is introduced to make it safe to
share, and new logic is introduced to coordinate the early release
of the SERIALIZABLEXACT required for the SXACT_FLAG_RO_SAFE
optimization, as follows:
The first backend to observe the SXACT_FLAG_RO_SAFE flag (set by
some other transaction) will 'partially release' the SERIALIZABLEXACT,
meaning that the conflicts and locks it holds are released, but the
SERIALIZABLEXACT itself will remain active because other backends
might still have a pointer to it.
Whenever any backend notices the SXACT_FLAG_RO_SAFE flag, it clears
its own MySerializableXact variable and frees local resources so that
it can skip SSI checks for the rest of the transaction. In the
special case of the leader process, it transfers the SERIALIZABLEXACT
to a new variable SavedSerializableXact, so that it can be completely
released at the end of the transaction after all workers have exited.
Remove the serializable_okay flag added to CreateParallelContext() by
commit 9da0cc35, because it's now redundant.
Author: Thomas Munro
Reviewed-by: Haribabu Kommi, Robert Haas, Masahiko Sawada, Kevin Grittner
Discussion: https://postgr.es/m/CAEepm=0gXGYhtrVDWOTHS8SQQy_=S9xo+8oCxGLWZAOoeJ=yzQ@mail.gmail.com
93473c6 has removed openLogOff, changing on the way the error message
which is used to report partial writes to WAL segments. The
newly-introduced error message used the offset up to which the write has
happened, keeping always the same total length to write. This changes
the error message so as the number of bytes left to write are reported.
Reported-by: Michael Paquier
Author: Robert Haas
Discussion: https://postgr.es/m/20190306235251.GA17293@paquier.xyz
This fixes two sets of issues related to the use of transient files in
the backend:
1) OpenTransientFile() has been used in some code paths with read-write
flags while read-only is sufficient, so switch those calls to be
read-only where necessary. These have been reported by Joe Conway.
2) When opening transient files, it is up to the caller to close the
file descriptors opened. In error code paths, CloseTransientFile() gets
called to clean up things before issuing an error. However in normal
exit paths, a lot of callers of CloseTransientFile() never actually
reported errors, which could leave a file descriptor open without
knowing about it. This is an issue I complained about a couple of
times, but never had the courage to write and submit a patch, so here we
go.
Note that one frontend code path is impacted by this commit so as an
error is issued when fetching control file data, making backend and
frontend to be treated consistently.
Reported-by: Joe Conway, Michael Paquier
Author: Michael Paquier
Reviewed-by: Álvaro Herrera, Georgios Kokolatos, Joe Conway
Discussion: https://postgr.es/m/20190301023338.GD1348@paquier.xyz
Discussion: https://postgr.es/m/c49b69ec-e2f7-ff33-4f17-0eaa4f2cef27@joeconway.com
When preparing a transaction in two-phase commit, a dummy PGPROC entry
holding the GID used for the transaction is registered, which gets
released once COMMIT PREPARED is run. Prior releasing its shared memory
state, all the locks taken in the prepared transaction are released
using a dedicated set of callbacks (pgstat and multixact having similar
callbacks), which may cause the locks to be released before the GID is
set free.
Hence, there is a small window where lock conflicts could happen, for
example:
- Transaction A releases its locks, still holding its GID in shared
memory.
- Transaction B held a lock which conflicted with locks of transaction
A.
- Transaction B continues its processing, reusing the same GID as
transaction A.
- Transaction B fails because of a conflicting GID, already in use by
transaction A.
This commit changes the shared memory state release so as post-commit
callbacks and predicate lock cleanup happen consistently with the shared
memory state cleanup for the dummy PGPROC entry. The race window is
small and 2PC had this issue from the start, so no backpatch is done.
On top if that fixes discussed involved ABI breakages, which are not
welcome in stable branches.
Reported-by: Oleksii Kliukin, Ildar Musin
Diagnosed-by: Oleksii Kliukin, Ildar Musin
Author: Michael Paquier
Reviewed-by: Masahiko Sawada, Oleksii Kliukin
Discussion: https://postgr.es/m/BF9B38A4-2BFF-46E8-BA87-A2D00A8047A6@hintbits.com
When reading a new page internally and depending on the way the WAL
reader facility gets used by plugins, the current implementation of the
WAL reader may finish by reading a block multiple times while it is not
actually necessary as the requested data length may be equal to what has
been already read. This can happen for any size, but is more likely to
happen at the end of a page. This can cause performance penalties in
plugins which rely on the block reads to be purely sequential, zlib not
liking backward reads for example. The new behavior also shaves some
cycles when doing recovery.
Author: Arthur Zakirov
Reviewed-by: Andrey Lepikhov, Michael Paquier, Grigory Smolkin
Discussion: https://postgr.es/m/2ddf4a32-517e-d6f4-d992-4a63b6035bfd@postgrespro.ru
Since its introduction, max_wal_senders is counted as part of
max_connections when it comes to define how many connection slots can be
used for replication connections with a WAL sender context. This can
lead to confusion for some users, as it could be possible to block a
base backup or replication from happening because other backend sessions
are already taken for other purposes by an application, and
superuser-only connection slots are not a correct solution to handle
that case.
This commit makes max_wal_senders independent of max_connections for its
handling of PGPROC entries in ProcGlobal, meaning that connection slots
for WAL senders are handled using their own free queue, like autovacuum
workers and bgworkers.
One compatibility issue that this change creates is that a standby now
requires to have a value of max_wal_senders at least equal to its
primary. So, if a standby created enforces the value of
max_wal_senders to be lower than that, then this could break failovers.
Normally this should not be an issue though, as any settings of a
standby are inherited from its primary as postgresql.conf gets normally
copied as part of a base backup, so parameters would be consistent.
Author: Alexander Kukushkin
Reviewed-by: Kyotaro Horiguchi, Petr Jelínek, Masahiko Sawada, Oleksii
Kliukin
Discussion: https://postgr.es/m/CAFh8B=nBzHQeYAu0b8fjK-AF1X4+_p6GRtwG+cCgs6Vci2uRuQ@mail.gmail.com
Previously, all heaps had FSMs. For very small tables, this means that the
FSM took up more space than the heap did. This is wasteful, so now we
refrain from creating the FSM for heaps with 4 pages or fewer. If the last
known target block has insufficient space, we still try to insert into some
other page before giving up and extending the relation, since doing
otherwise leads to table bloat. Testing showed that trying every page
penalized performance slightly, so we compromise and try every other page.
This way, we visit at most two pages. Any pages with wasted free space
become visible at next relation extension, so we still control table bloat.
As a bonus, directly attempting one or two pages can even be faster than
consulting the FSM would have been.
Once the FSM is created for a heap we don't remove it even if somebody
deletes all the rows from the corresponding relation. We don't think it is
a useful optimization as it is quite likely that relation will again grow
to the same size.
Author: John Naylor, Amit Kapila
Reviewed-by: Amit Kapila
Tested-by: Mithun C Y
Discussion: https://www.postgresql.org/message-id/CAJVSVGWvB13PzpbLEecFuGFc5V2fsO736BsdTakPiPAcdMM5tQ@mail.gmail.com
A timeout of 5s is used when waiting for WAL to become available at
recovery so as the startup process is able to react promptly if a
trigger file shows up. However this missed the fact that the startup
process also relies on the timeout to check periodically the status of
any active WAL receiver.
Discussion: https://postgr.es/m/20190131070956.GE13429@paquier.xyz
Create a new header optimizer/optimizer.h, which exposes just the
planner functions that can be used "at arm's length", without need
to access Paths or the other planner-internal data structures defined
in nodes/relation.h. This is intended to provide the whole planner
API seen by most of the rest of the system; although FDWs still need
to use additional stuff, and more thought is also needed about just
what selfuncs.c should rely on.
The main point of doing this now is to limit the amount of new
#include baggage that will be needed by "planner support functions",
which I expect to introduce later, and which will be in relevant
datatype modules rather than anywhere near the planner.
This commit just moves relevant declarations into optimizer.h from
other header files (a couple of which go away because everything
got moved), and adjusts #include lists to match. There's further
cleanup that could be done if we want to decide that some stuff
being exposed by optimizer.h doesn't belong in the planner at all,
but I'll leave that for another day.
Discussion: https://postgr.es/m/11460.1548706639@sss.pgh.pa.us
Previously, all heaps had FSMs. For very small tables, this means that the
FSM took up more space than the heap did. This is wasteful, so now we
refrain from creating the FSM for heaps with 4 pages or fewer. If the last
known target block has insufficient space, we still try to insert into some
other page before giving up and extending the relation, since doing
otherwise leads to table bloat. Testing showed that trying every page
penalized performance slightly, so we compromise and try every other page.
This way, we visit at most two pages. Any pages with wasted free space
become visible at next relation extension, so we still control table bloat.
As a bonus, directly attempting one or two pages can even be faster than
consulting the FSM would have been.
Once the FSM is created for a heap we don't remove it even if somebody
deletes all the rows from the corresponding relation. We don't think it is
a useful optimization as it is quite likely that relation will again grow
to the same size.
Author: John Naylor with design inputs and some code contribution by Amit Kapila
Reviewed-by: Amit Kapila
Tested-by: Mithun C Y
Discussion: https://www.postgresql.org/message-id/CAJVSVGWvB13PzpbLEecFuGFc5V2fsO736BsdTakPiPAcdMM5tQ@mail.gmail.com
There were two flags used to track the access to temporary tables and
to the temporary namespace of a session which are used to restrict
PREPARE TRANSACTION, however the first control flag is a concept
included in the second. This removes the flag for temporary table
tracking, keeping around only the one at namespace level.
Author: Michael Paquier
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/20190118053126.GH1883@paquier.xyz
Given these routines are heap specific, and that there will be more
generic visibility support in via table AM, it makes sense to move the
prototypes to heapam.h (routines like HeapTupleSatisfiesVacuum will
not be exposed in a generic fashion, because they are too storage
specific).
Similarly, the code in tqual.c is specific to heap, so moving it into
access/heap/ makes sense.
Author: Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
Attempting to use a temporary table within a two-phase transaction is
forbidden for ages. However, there have been uncovered grounds for
a couple of other object types and commands which work on temporary
objects with two-phase commit. In short, trying to create, lock or drop
an object on a temporary schema should not be authorized within a
two-phase transaction, as it would cause its state to create
dependencies with other sessions, causing all sorts of side effects with
the existing session or other sessions spawned later on trying to use
the same temporary schema name.
Regression tests are added to cover all the grounds found, the original
report mentioned function creation, but monitoring closer there are many
other patterns with LOCK, DROP or CREATE EXTENSION which are involved.
One of the symptoms resulting in combining both is that the session
which used the temporary schema is not able to shut down completely,
waiting for being able to drop the temporary schema, something that it
cannot complete because of the two-phase transaction involved with
temporary objects. In this case the client is able to disconnect but
the session remains alive on the backend-side, potentially blocking
connection backend slots from being used. Other problems reported could
also involve server crashes.
This is back-patched down to v10, which is where 9b013dc has introduced
MyXactFlags, something that this patch relies on.
Reported-by: Alexey Bashtanov
Author: Michael Paquier
Reviewed-by: Masahiko Sawada
Discussion: https://postgr.es/m/5d910e2e-0db8-ec06-dd5f-baec420513c3@imap.cc
Backpatch-through: 10
This removes a portion of infrastructure introduced by fe0a0b5 to allow
compilation of Postgres in environments where no strong random source is
available, meaning that there is no linking to OpenSSL and no
/dev/urandom (Windows having its own CryptoAPI). No systems shipped
this century lack /dev/urandom, and the buildfarm is actually not
testing this switch at all, so just remove it. This simplifies
particularly some backend code which included a fallback implementation
using shared memory, and removes a set of alternate regression output
files from pgcrypto.
Author: Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/20181230063219.GG608@paquier.xyz
The function name pg_stop_backup() has been included for ages in some
log messages when stopping the backup, which is confusing for base
backups taken with the replication protocol because this function is
never called. Some other comments and messages in this area are
improved while on it.
The new wording is based on input and suggestions from several people,
all listed below.
Author: Michael Paquier
Reviewed-by: Peter Eisentraut, Álvaro Herrera, Tom Lane
Discussion: https://postgr.es/m/20181221040510.GA12599@paquier.xyz
While it seems OK to not be concerned about fsync() failure for a
pre-existing signal file, it's not OK to not even check for open()
failure. This at least causes complaints from static analyzers,
and I think on some platforms passing -1 to fsync() or close() might
trigger assertion-type failures. Also add (void) casts to make clear
that we're ignoring fsync's result intentionally.
Oversights in commit 2dedf4d9a, noted by Coverity.
Commit ffa4cbd62 added logic to detect SIGPIPE failure of a COPY child
process, but it only worked correctly if the SIGPIPE occurred in the
immediate child process. Depending on the shell in use and the
complexity of the shell command string, we might instead get back
an exit code of 128 + SIGPIPE, representing a shell error exit
reporting SIGPIPE in the child process.
We could just hack up ClosePipeToProgram() to add the extra case,
but it seems like this is a fairly general issue deserving a more
general and better-documented solution. I chose to add a couple
of functions in src/common/wait_error.c, which is a natural place
to know about wait-result encodings, that will test for either a
specific child-process signal type or any child-process signal failure.
Then, adjust other places that were doing ad-hoc tests of this type
to use the common functions.
In RestoreArchivedFile, this fixes a race condition affecting whether
the process will report an error or just silently proc_exit(1): before,
that depended on whether the intermediate shell got SIGTERM'd itself
or reported a child process failing on SIGTERM.
Like the previous patch, back-patch to v10; we could go further
but there seems no real need to.
Per report from Erik Rijkers.
Discussion: https://postgr.es/m/f3683f87ab1701bea5d86a7742b22432@xs4all.nl
Skipping over the "hole" in full page images in the XLOG code was
described as being a form of compression, but this got a bit confusing
since we now have PGLZ-based compression happening, so adjust the
wording to discuss "removing" the "hole" and keeping the talk about
compression to where we're talking about using PGLZ-based compression of
the full page images.
Reviewed-By: Kyotaro Horiguchi
Discussion: https://postgr.es/m/20181127234341.GM3415@tamriel.snowman.net
recovery.conf settings are now set in postgresql.conf (or other GUC
sources). Currently, all the affected settings are PGC_POSTMASTER;
this could be refined in the future case by case.
Recovery is now initiated by a file recovery.signal. Standby mode is
initiated by a file standby.signal. The standby_mode setting is
gone. If a recovery.conf file is found, an error is issued.
The trigger_file setting has been renamed to promote_trigger_file as
part of the move.
The documentation chapter "Recovery Configuration" has been integrated
into "Server Configuration".
pg_basebackup -R now appends settings to postgresql.auto.conf and
creates a standby.signal file.
Author: Fujii Masao <masao.fujii@gmail.com>
Author: Simon Riggs <simon@2ndquadrant.com>
Author: Abhijit Menon-Sen <ams@2ndquadrant.com>
Author: Sergei Kornilov <sk@zsrv.org>
Discussion: https://www.postgresql.org/message-id/flat/607741529606767@web3g.yandex.ru/
Users of the WaitEventSet and WaitLatch() APIs can now choose between
asking for WL_POSTMASTER_DEATH and then handling it explicitly, or asking
for WL_EXIT_ON_PM_DEATH to trigger immediate exit on postmaster death.
This reduces code duplication, since almost all callers want the latter.
Repair all code that was previously ignoring postmaster death completely,
or requesting the event but ignoring it, or requesting the event but then
doing an unconditional PostmasterIsAlive() call every time through its
event loop (which is an expensive syscall on platforms for which we don't
have USE_POSTMASTER_DEATH_SIGNAL support).
Assert that callers of WaitLatchXXX() under the postmaster remember to
ask for either WL_POSTMASTER_DEATH or WL_EXIT_ON_PM_DEATH, to prevent
future bugs.
The only process that doesn't handle postmaster death is syslogger. It
waits until all backends holding the write end of the syslog pipe
(including the postmaster) have closed it by exiting, to be sure to
capture any parting messages. By using the WaitEventSet API directly
it avoids the new assertion, and as a by-product it may be slightly
more efficient on platforms that have epoll().
Author: Thomas Munro
Reviewed-by: Kyotaro Horiguchi, Heikki Linnakangas, Tom Lane
Discussion: https://postgr.es/m/CAEepm%3D1TCviRykkUb69ppWLr_V697rzd1j3eZsRMmbXvETfqbQ%40mail.gmail.com,
https://postgr.es/m/CAEepm=2LqHzizbe7muD7-2yHUbTOoF7Q+qkSD5Q41kuhttRTwA@mail.gmail.com
Previously tables declared WITH OIDS, including a significant fraction
of the catalog tables, stored the oid column not as a normal column,
but as part of the tuple header.
This special column was not shown by default, which was somewhat odd,
as it's often (consider e.g. pg_class.oid) one of the more important
parts of a row. Neither pg_dump nor COPY included the contents of the
oid column by default.
The fact that the oid column was not an ordinary column necessitated a
significant amount of special case code to support oid columns. That
already was painful for the existing, but upcoming work aiming to make
table storage pluggable, would have required expanding and duplicating
that "specialness" significantly.
WITH OIDS has been deprecated since 2005 (commit ff02d0a05280e0).
Remove it.
Removing includes:
- CREATE TABLE and ALTER TABLE syntax for declaring the table to be
WITH OIDS has been removed (WITH (oids[ = true]) will error out)
- pg_dump does not support dumping tables declared WITH OIDS and will
issue a warning when dumping one (and ignore the oid column).
- restoring an pg_dump archive with pg_restore will warn when
restoring a table with oid contents (and ignore the oid column)
- COPY will refuse to load binary dump that includes oids.
- pg_upgrade will error out when encountering tables declared WITH
OIDS, they have to be altered to remove the oid column first.
- Functionality to access the oid of the last inserted row (like
plpgsql's RESULT_OID, spi's SPI_lastoid, ...) has been removed.
The syntax for declaring a table WITHOUT OIDS (or WITH (oids = false)
for CREATE TABLE) is still supported. While that requires a bit of
support code, it seems unnecessary to break applications / dumps that
do not use oids, and are explicit about not using them.
The biggest user of WITH OID columns was postgres' catalog. This
commit changes all 'magic' oid columns to be columns that are normally
declared and stored. To reduce unnecessary query breakage all the
newly added columns are still named 'oid', even if a table's column
naming scheme would indicate 'reloid' or such. This obviously
requires adapting a lot code, mostly replacing oid access via
HeapTupleGetOid() with access to the underlying Form_pg_*->oid column.
The bootstrap process now assigns oids for all oid columns in
genbki.pl that do not have an explicit value (starting at the largest
oid previously used), only oids assigned later by oids will be above
FirstBootstrapObjectId. As the oid column now is a normal column the
special bootstrap syntax for oids has been removed.
Oids are not automatically assigned during insertion anymore, all
backend code explicitly assigns oids with GetNewOidWithIndex(). For
the rare case that insertions into the catalog via SQL are called for
the new pg_nextoid() function can be used (which only works on catalog
tables).
The fact that oid columns on system tables are now normal columns
means that they will be included in the set of columns expanded
by * (i.e. SELECT * FROM pg_class will now include the table's oid,
previously it did not). It'd not technically be hard to hide oid
column by default, but that'd mean confusing behavior would either
have to be carried forward forever, or it'd cause breakage down the
line.
While it's not unlikely that further adjustments are needed, the
scope/invasiveness of the patch makes it worthwhile to get merge this
now. It's painful to maintain externally, too complicated to commit
after the code code freeze, and a dependency of a number of other
patches.
Catversion bump, for obvious reasons.
Author: Andres Freund, with contributions by John Naylor
Discussion: https://postgr.es/m/20180930034810.ywp2c7awz7opzcfr@alap3.anarazel.de
On some operating systems, it doesn't make sense to retry fsync(),
because dirty data cached by the kernel may have been dropped on
write-back failure. In that case the only remaining copy of the
data is in the WAL. A subsequent fsync() could appear to succeed,
but not have flushed the data. That means that a future checkpoint
could apparently complete successfully but have lost data.
Therefore, violently prevent any future checkpoint attempts by
panicking on the first fsync() failure. Note that we already
did the same for WAL data; this change extends that behavior to
non-temporary data files.
Provide a GUC data_sync_retry to control this new behavior, for
users of operating systems that don't eject dirty data, and possibly
forensic/testing uses. If it is set to on and the write-back error
was transient, a later checkpoint might genuinely succeed (on a
system that does not throw away buffers on failure); if the error is
permanent, later checkpoints will continue to fail. The GUC defaults
to off, meaning that we panic.
Back-patch to all supported releases.
There is still a narrow window for error-loss on some operating
systems: if the file is closed and later reopened and a write-back
error occurs in the intervening time, but the inode has the bad
luck to be evicted due to memory pressure before we reopen, we could
miss the error. A later patch will address that with a scheme
for keeping files with dirty data open at all times, but we judge
that to be too complicated to back-patch.
Author: Craig Ringer, with some adjustments by Thomas Munro
Reported-by: Craig Ringer
Reviewed-by: Robert Haas, Thomas Munro, Andres Freund
Discussion: https://postgr.es/m/20180427222842.in2e4mibx45zdth5%40alap3.anarazel.de
When reading a WAL record, its contents are copied into an intermediate
buffer. However, doing so is not necessary if the record fits fully
into the current page, saving one memcpy for each such record. The
allocation handling of the intermediate buffer is also now done only
when a record crosses a page boundary, shaving some extra cycles when
reading a WAL record.
Author: Andrey Lepikhov
Reviewed-by: Kyotaro Horiguchi, Heikki Linnakangas
Discussion: https://postgr.es/m/c2ea54dd-a1d3-80eb-ddbf-7e6f258e615e@postgrespro.ru
Amit Kapila
Thomas Munro
Alexander Korotkov
Andres Freund
Tomas Vondra
Alvaro Herrera
Fujii Masao
Noah Misch
Peter Eisentraut
Robert Haas
Michael Paquier
Tom Lane
Heikki Linnakangas
Bruce Momjian
Stephen Frost
Peter Eisentraut