(table or index) before trying to open its relcache entry. This fixes
race conditions in which someone else commits a change to the relation's
catalog entries while we are in process of doing relcache load. Problems
of that ilk have been reported sporadically for years, but it was not
really practical to fix until recently --- for instance, the recent
addition of WAL-log support for in-place updates helped.
Along the way, remove pg_am.amconcurrent: all AMs are now expected to support
concurrent update.
set to the large object context ("fscxt"), as this is inevitably a source of
transaction-duration memory leaks. Not sure why we'd not noticed it before;
maybe people weren't touching a whole lot of LOs in the same transaction
before the 8.1 pg_dump changes. Per report from Wayne Conrad.
Backpatched as far as 8.1, but the problem doubtless goes all the way back.
I'm disinclined to spend the time to try to verify that the older branches
would still work if patched, seeing that this code was significantly modified
for 8.0 and again for 8.1, and that we don't have any trouble reports before
8.1. (Maybe the leaks were smaller before?)
if we already have a stronger lock due to the index's table being the
update target table of the query. Same optimization I applied earlier
at the table level. There doesn't seem to be much interest in the more
radical idea of not locking indexes at all, so do what we can ...
whenever we generate a new OID. This prevents occasional duplicate-OID
errors that can otherwise occur once the OID counter has wrapped around.
Duplicate relfilenode values are also checked for when creating new
physical files. Per my recent proposal.
a descriptor that uses the current transaction snapshot, rather than
SnapshotNow as it did before (and still does if INV_WRITE is set).
This means pg_dump will now dump a consistent snapshot of large object
contents, as it never could do before. Also, add a lo_create() function
that is similar to lo_creat() but allows the desired OID of the large
object to be specified. This will simplify pg_restore considerably
(but I'll fix that in a separate commit).
indexes. Replace all heap_openr and index_openr calls by heap_open
and index_open. Remove runtime lookups of catalog OID numbers in
various places. Remove relcache's support for looking up system
catalogs by name. Bulky but mostly very boring patch ...
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
as per recent discussions. Invent SubTransactionIds that are managed like
CommandIds (ie, counter is reset at start of each top transaction), and
use these instead of TransactionIds to keep track of subtransaction status
in those modules that need it. This means that a subtransaction does not
need an XID unless it actually inserts/modifies rows in the database.
Accordingly, don't assign it an XID nor take a lock on the XID until it
tries to do that. This saves a lot of overhead for subtransactions that
are only used for error recovery (eg plpgsql exceptions). Also, arrange
to release a subtransaction's XID lock as soon as the subtransaction
exits, in both the commit and abort cases. This avoids holding many
unique locks after a long series of subtransactions. The price is some
additional overhead in XactLockTableWait, but that seems acceptable.
Finally, restructure the state machine in xact.c to have a more orthogonal
set of states for subtransactions.
possible to trap an error inside a function rather than letting it
propagate out to PostgresMain. You still have to use AbortCurrentTransaction
to clean up, but at least the error handling itself will cooperate.
password/group files. Also allow read-only subtransactions of a read-write
parent, but not vice versa. These are the reasonably noncontroversial
parts of Alvaro's recent mop-up patch, plus further work on large objects
to minimize use of the TopTransactionResourceOwner.
large objects. Dump all these in pg_dump; also add code to pg_dump
user-defined conversions. Make psql's large object code rely on
the backend for inserting/deleting LOB comments, instead of trying to
hack pg_description directly. Documentation and regression tests added.
Christopher Kings-Lynne, code reviewed by Tom
pghackers proposal of 8-Nov. All the existing cross-type comparison
operators (int2/int4/int8 and float4/float8) have appropriate support.
The original proposal of storing the right-hand-side datatype as part of
the primary key for pg_amop and pg_amproc got modified a bit in the event;
it is easier to store zero as the 'default' case and only store a nonzero
when the operator is actually cross-type. Along the way, remove the
long-since-defunct bigbox_ops operator class.
Remove the 'strategy map' code, which was a large amount of mechanism
that no longer had any use except reverse-mapping from procedure OID to
strategy number. Passing the strategy number to the index AM in the
first place is simpler and faster.
This is a preliminary step in planned support for cross-datatype index
operations. I'm committing it now since the ScanKeyEntryInitialize()
API change touches quite a lot of files, and I want to commit those
changes before the tree drifts under me.
width types and varlena types, since with the introduction of CSTRING as
a more-or-less-real type, these concepts aren't identical. I've tried to
use varlena consistently to denote datatypes with typlen = -1, ie, they
have a length word and are potentially TOASTable; while the term variable
width covers both varlena and cstring (and, perhaps, someday other types
with other rules for computing the actual width). No code changes in this
commit except for renaming a couple macros.
hardwired lists of index names for each catalog, use the relcache's
mechanism for caching lists of OIDs of indexes of any table. This
reduces the common case of updating system catalog indexes to a single
line, makes it much easier to add a new system index (in fact, you
can now do so on-the-fly if you want to), and as a nice side benefit
improves performance a little. Per recent pghackers discussion.
in snapshots, per my proposal of a few days ago. Also, tweak heapam.c
routines (heap_insert, heap_update, heap_delete, heap_mark4update) to
be passed the command ID to use, instead of doing GetCurrentCommandID.
For catalog updates they'll still get passed current command ID, but
for updates generated from the main executor they'll get passed the
command ID saved in the snapshot the query is using. This should fix
some corner cases associated with functions and triggers that advance
current command ID while an outer query is still in progress.
yesterday's proposal to pghackers. Also remove unnecessary parameters
to heap_beginscan, heap_rescan. I modified pg_proc.h to reflect the
new numbers of parameters for the AM interface routines, but did not
force an initdb because nothing actually looks at those fields.
are now separate files "postgres.h" and "postgres_fe.h", which are meant
to be the primary include files for backend .c files and frontend .c files
respectively. By default, only include files meant for frontend use are
installed into the installation include directory. There is a new make
target 'make install-all-headers' that adds the whole content of the
src/include tree to the installed fileset, for use by people who want to
develop server-side code without keeping the complete source tree on hand.
Cleaned up a whole lot of crufty and inconsistent header inclusions.
bothering to check the return value --- which meant that in case the
update or delete failed because of a concurrent update, you'd not find
out about it, except by observing later that the transaction produced
the wrong outcome. There are now subroutines simple_heap_update and
simple_heap_delete that should be used anyplace that you're not prepared
to do the full nine yards of coping with concurrent updates. In
practice, that seems to mean absolutely everywhere but the executor,
because *noplace* else was checking.
here is the patch attached which do check in each BLOB operation, if we are
in transaction, and raise an error otherwise. This will prevent such mistakes.
--
Sincerely Yours,
Denis Perchine
kibitzing from Tom Lane. Large objects are now all stored in a single
system relation "pg_largeobject" --- no more xinv or xinx files, no more
relkind 'l'. This should offer substantial performance improvement for
large numbers of LOs, since there won't be directory bloat anymore.
It'll also fix problems like running out of locktable space when you
access thousands of LOs in one transaction.
Also clean up cruft in read/write routines. LOs with "holes" in them
(never-written byte ranges) now work just like Unix files with holes do:
a hole reads as zeroes but doesn't occupy storage space.
INITDB forced!
> Regression tests opr_sanity and sanity_check are now failing.
Um, Bruce, I've said several times that I didn't think Perchine's large
object changes should be applied until someone had actually reviewed
them.
I tested it restoring my database with > 100000 BLOBS, and dumping it out.
But unfortunatly I can not restore it back due to problems in pg_dump.
--
Sincerely Yours,
Denis Perchine
> this is patch v 0.4 to support transactions with BLOBs.
> All BLOBs are in one table. You need to make initdb.
>
> --
> Sincerely Yours,
> Denis Perchine
pass-by-ref data types --- eg, an index on lower(textfield) --- no longer
leak memory during index creation or update. Clean up a lot of redundant
code ... did you know that copy, vacuum, truncate, reindex, extend index,
and bootstrap each basically duplicated the main executor's logic for
extracting information about an index and preparing index entries?
Functional indexes should be a little faster now too, due to removal
of repeated function lookups.
CREATE INDEX 'opt_type' clause is deimplemented by these changes,
but I haven't removed it from the parser yet (need to merge with
Thomas' latest change set first).
Don't go through pg_exec_query_dest(), but directly to the execution
routines. Also, extend parameter lists so that there's no need to
change the global setting of allowSystemTableMods, a hack that was
certain to cause trouble in the event of any error.
for details). It doesn't really do that much yet, since there are no
short-term memory contexts in the executor, but the infrastructure is
in place and long-term contexts are handled reasonably. A few long-
standing bugs have been fixed, such as 'VACUUM; anything' in a single
query string crashing. Also, out-of-memory is now considered a
recoverable ERROR, not FATAL.
Eliminate a large amount of crufty, now-dead code in and around
memory management.
Fix problem with holding off SIGTRAP, SIGSEGV, etc in postmaster and
backend startup.
passing the index-is-unique flag to index build routines (duh! ...
why wasn't it done this way to begin with?). Aside from eliminating
an eyesore, this should save a few milliseconds in btree index creation
because a full scan of pg_index is not needed any more.
was inappropriately relying on rel->rd_nblocks to tell if the LO is
empty (apparently a hack to get around a long-dead index bug), causing
misbehavior on a written-but-never-vacuumed LO. Also, inv_read failed
to cope gracefully with 'holes' (unwritten regions) in the object.
inputs have been converted to newstyle. This should go a long way towards
fixing our portability problems with platforms where char and short
parameters are passed differently from int-width parameters. Still
more to do for the Alpha port however.
key call sites are changed, but most called functions are still oldstyle.
An exception is that the PL managers are updated (so, for example, NULL
handling now behaves as expected in plperl and plpgsql functions).
NOTE initdb is forced due to added column in pg_proc.
relcache entry no longer leaks a small amount of memory. index_endscan
now releases all the memory acquired by index_beginscan, so callers of it
should NOT pfree the scan descriptor anymore.
BufFile so that it handles multi-segment temporary files transparently.
This allows sorts and hashes to work with data exceeding 2Gig (or whatever
the local limit on file size is). Change psort.c to use relative seeks
instead of absolute seeks for backwards scanning, so that it won't fail
when the data volume exceeds 2Gig.
additional argument specifying the kind of lock to acquire/release (or
'NoLock' to do no lock processing). Ensure that all relations are locked
with some appropriate lock level before being examined --- this ensures
that relevant shared-inval messages have been processed and should prevent
problems caused by concurrent VACUUM. Fix several bugs having to do with
mismatched increment/decrement of relation ref count and mismatched
heap_open/close (which amounts to the same thing). A bogus ref count on
a relation doesn't matter much *unless* a SI Inval message happens to
arrive at the wrong time, which is probably why we got away with this
sloppiness for so long. Repair missing grab of AccessExclusiveLock in
DROP TABLE, ALTER/RENAME TABLE, etc, as noted by Hiroshi.
Recommend 'make clean all' after pulling this update; I modified the
Relation struct layout slightly.
Will post further discussion to pghackers list shortly.
a field was labelled as a primary key, the system automatically
created a unique index on the field. This patch extends it so
that the index has the indisprimary field set. You can pull a list
of primary keys with the followiing select.
SELECT pg_class.relname, pg_attribute.attname
FROM pg_class, pg_attribute, pg_index
WHERE pg_class.oid = pg_attribute.attrelid AND
pg_class.oid = pg_index.indrelid AND
pg_index.indkey[0] = pg_attribute.attnum AND
pg_index.indisunique = 't';
There is nothing in this patch that modifies the template database to
set the indisprimary attribute for system tables. Should they be
changed or should we only be concerned with user tables?
D'Arcy
no longer returns buffer pointer, can be gotten from scan;
descriptor; bootstrap can create multi-key indexes;
pg_procname index now is multi-key index; oidint2, oidint4, oidname
are gone (must be removed from regression tests); use System Cache
rather than sequential scan in many places; heap_modifytuple no
longer takes buffer parameter; remove unused buffer parameter in
a few other functions; oid8 is not index-able; remove some use of
single-character variable names; cleanup Buffer variables usage
and scan descriptor looping; cleaned up allocation and freeing of
tuples; 18k lines of diff;
calls. Outside a transaction, the backend detects them as buffer
leaks; it sends a NOTICE, and frees them. This sometimes cause a
segmentation fault (at least on Linux). These indexes are initialized
on the first lo_read/lo_write/lo_tell call, and (normally) closed
on a lo_close call. Thus the buffer leaks appear when lo direct
access functions are used, and not with lo_import/lo_export functions
(libpq version calls lo_close before ending the command, and the
backend version uses another path).
The included patches (against recent snapshot, and against 6.3.2)
cause indexes to be closed on transaction end (that is on explicit
'END' statment, or on command termination outside trasaction blocks),
thus preventing the buffer leaks while increasing performance inside
transactions. Some (all?) 'classic' memory leaks are also removed.
I hope it will be ok.
--- Pascal ANDRE, graduated from Ecole Centrale Paris andre@via.ecp.fr
1. Removes the unnecessary "#define AbcRegProcedure 123"'s from
pg_proc.h.
2. Changes those #defines to use the names already defined in
fmgr.h.
3. Forces the make of fmgr.h in backend/Makefile instead of having
it
made as a dependency in access/common/Makefile *hack*hack*hack*
4. Rearranged the #includes to a less helter-skelter arrangement,
also
changing <file.h> to "file.h" to signify a non-system header.
5. Removed "pg_proc.h" from files where its only purpose was for
the
#defines removed in item #1.
6. Added "fmgr.h" to each file changed for completeness sake.
Turns out that #6 was not necessary for some files because fmgr.h
was being included in a roundabout way SIX levels deep by the first
include.
"access/genam.h"
->"access/relscan.h"
->"utils/rel.h"
->"access/strat.h"
->"access/skey.h"
->"fmgr.h"
So adding fmgr.h really didn't add anything to the compile, hopefully
just made it clearer to the programmer.
S Darren.
Bruce Momjian
Tom Lane
Neil Conway
PostgreSQL Daemon
Jan Wieck
Vadim B. Mikheev