place of time_t, as per prior discussion. The behavior does not change
on machines without a 64-bit-int type, but on machines with one, which
is most, we are rid of the bizarre boundary behavior at the edges of
the 32-bit-time_t range (1901 and 2038). The system will now treat
times over the full supported timestamp range as being in your local
time zone. It may seem a little bizarre to consider that times in
4000 BC are PST or EST, but this is surely at least as reasonable as
propagating Gregorian calendar rules back that far.
I did not modify the format of the zic timezone database files, which
means that for the moment the system will not know about daylight-savings
periods outside the range 1901-2038. Given the way the files are set up,
it's not a simple decision like 'widen to 64 bits'; we have to actually
think about the range of years that need to be supported. We should
probably inquire what the plans of the upstream zic people are before
making any decisions of our own.
. only use the -W flag on pwd for $pkglibdir. All the other paths need
to be seen as MSys type paths, whereas $pkglibdir needs to be expressed
as a genuine windows path.
. run single tests in the background and explicitly wait for them -
solves the problem of the MSys shell not waiting properly for the copy
test to finish.
. use pg_ctl to shut down the test postmaster - no more use of ad hoc
kill programs or the task manager.
Andrew Dunstan
environment variable processing to libpq.
The patch also adds code to our client apps so we set the environment
variable directly based on our binary location, unless it is already
set. This will allow our applications to emit proper locale messages
that are generated in libpq.
locking conflict against concurrent CHECKPOINT that was discussed a few
weeks ago. Also, if not using WAL archiving (which is always true ATM
but won't be if PITR makes it into this release), there's no need to
WAL-log the index build process; it's sufficient to force-fsync the
completed index before commit. This seems to gain about a factor of 2
in my tests, which is consistent with writing half as much data. I did
not try it with WAL on a separate drive though --- probably the gain would
be a lot less in that scenario.
of bug report #1150. Also, arrange that the object owner's irrevocable
grant-option permissions are handled implicitly by the system rather than
being listed in the ACL as self-granted rights (which was wrong anyway).
I did not take the further step of showing these permissions in an
explicit 'granted by _SYSTEM' ACL entry, as that seemed more likely to
bollix up existing clients than to do anything really useful. It's still
a possible future direction, though.
temp tables, and avoid WAL-logging truncations of temp tables. Do issue
fsync on truncated files (not sure this is necessary but it seems like
a good idea).
rather than an error code, and does elog(ERROR) not elog(WARNING)
when it detects a problem. All callers were simply elog(ERROR)'ing on
failure return anyway, and I find it hard to envision a caller that would
not, so we may as well simplify the callers and produce the more useful
error message directly.
issue in timestamp conversion that we hacked around for so long by
ignoring the seconds field from localtime(). It's simple: you have
to watch out for platform-specific roundoff error when reducing a
possibly-fractional timestamp to integral time_t form. In particular
we should subtract off the already-determined fractional fsec field.
This should be enough to get an exact answer with int64 timestamps;
with float timestamps, throw in a rint() call just to be sure.
explicitly fsync'ing every (non-temp) file we have written since the
last checkpoint. In the vast majority of cases, the burden of the
fsyncs should fall on the bgwriter process not on backends. (To this
end, we assume that an fsync issued by the bgwriter will force out
blocks written to the same file by other processes using other file
descriptors. Anyone have a problem with that?) This makes the world
safe for WIN32, which ain't even got sync(2), and really makes the world
safe for Unixen as well, because sync(2) never had the semantics we need:
it offers no way to wait for the requested I/O to finish.
Along the way, fix a bug I recently introduced in xlog recovery:
file truncation replay failed to clear bufmgr buffers for the dropped
blocks, which could result in 'PANIC: heap_delete_redo: no block'
later on in xlog replay.
than being random pieces of other files. Give bgwriter responsibility
for all checkpoint activity (other than a post-recovery checkpoint);
so this child process absorbs the functionality of the former transient
checkpoint and shutdown subprocesses. While at it, create an actual
include file for postmaster.c, which for some reason never had its own
file before.
this is an aclmask function and does not have the same return convention
as aclcheck functions. Also adjust the behavior so that users without
CREATE TEMP permission still have USAGE permission on their session's
temp schema. This allows privileged code to create a temp table and
make it accessible to code that's not got the same privilege. (Since
the default permissions on a table are no-access, an explicit grant on
the table will still be needed; but I see no reason that the temp schema
itself should prohibit such access.)
about a third, make it work on non-Windows platforms again. (But perhaps
I broke the WIN32 code, since I have no way to test that.) Fold all the
paths that fork postmaster child processes to go through the single
routine SubPostmasterMain, which takes care of resurrecting the state that
would normally be inherited from the postmaster (including GUC variables).
Clean up some places where there's no particularly good reason for the
EXEC and non-EXEC cases to work differently. Take care of one or two
FIXMEs that remained in the code.
of ThisStartUpID and RedoRecPtr into new backends. It's a lot easier just
to make them all grab the values out of shared memory during startup.
This helps to decouple the postmaster from checkpoint execution, which I
need since I'm intending to let the bgwriter do it instead, and it also
fixes a bug in the Win32 port: ThisStartUpID wasn't getting propagated at
all AFAICS. (Doesn't give me a lot of faith in the amount of testing that
port has gotten.)
ListCells are only 8 bytes instead of 12 (on 4-byte-pointer machines
anyway), it's worth maintaining a separate freelist for 8-byte objects.
Remembering that alloc chunks carry 8 bytes of overhead, this should
reduce the net storage requirement for a long List by about a third.
the four functions.
> Also, please justify the temp-related changes. I was not aware that we
> had any breakage there.
patch-tmp-schema.txt contains the following bits:
*) Changes pg_namespace_aclmask() so that the superuser is always able
to create objects in the temp namespace.
*) Changes pg_namespace_aclmask() so that if this is a temp namespace,
objects are only allowed to be created in the temp namespace if the
user has TEMP privs on the database. This encompasses all object
creation, not just TEMP tables.
*) InitTempTableNamespace() checks to see if the current user, not the
session user, has access to create a temp namespace.
The first two changes are necessary to support the third change. Now
it's possible to revoke all temp table privs from non-super users and
limiting all creation of temp tables/schemas via a function that's
executed with elevated privs (security definer). Before this change,
it was not possible to have a setuid function to create a temp
table/schema if the session user had no TEMP privs.
patch-area-path.txt contains:
*) Can now determine the area of a closed path.
patch-dfmgr.txt contains:
*) Small tweak to add the library path that's being expanded.
I was using $lib/foo.so and couldn't easily figure out what the error
message, "invalid macro name in dynamic library path" meant without
looking through the source code. With the path in there, at least I
know where to start looking in my config file.
Sean Chittenden
(1) boolean-and and boolean-or aggregates named bool_and and bool_or.
they (SHOULD;-) correspond to standard sql every and some/any aggregates.
they do not have the right name as there is a problem with
the standard and the parser for some/any. Tom also think that
the standard name is misleading because NULL are ignored.
Also add 'every' aggregate.
(2) bitwise integer aggregates named bit_and and bit_or for
int2, int4, int8 and bit types. They are not standard, but I find
them useful. I needed them once.
The patches adds:
- 2 new very short strict functions for boolean aggregates in
src/backed/utils/adt/bool.c,
src/include/utils/builtins.h and src/include/catalog/pg_proc.h
- the new aggregates declared in src/include/catalog/pg_proc.h and
src/include/catalog/pg_aggregate.h
- some documentation and validation about these new aggregates.
Fabien COELHO
extend the GUC variable set".
Plugin modules like the pl<lang> modules needs a way to declare
configuration parameters. The postmaster has no knowledge of such
modules when it reads the postgresql.conf file. Rather than allowing
totally unknown configuration parameters, the concept of a variable
"class" is introduced. Variables that belongs to a declared classes will
create a placeholder value of string type and will not generate an
error. When a module is loaded, it will declare variables for such a
class and make those variables "consume" any placeholders that has been
defined. Finally, the module will generate warnings for unrecognized
placeholders defined for its class.
More detail:
The design is outlined after the suggestions made by Tom Lane and Joe
Conway in this thread:
http://archives.postgresql.org/pgsql-hackers/2004-02/msg00229.php
A new string variable 'custom_variable_classes' is introduced. This
variable is a comma separated string of identifiers. Each identifier
denots a 'class' that will allow its members to be added without error.
This variable must be defined in postmaster.conf.
The lexer (guc_file.l) is changed so that it can accept a qualified name
in the form <ID>.<ID> as the name of a variable. I also changed so that
the 'custom_variable_classes', if found, is added first of all variables
in order to remove the order of declaration issue.
The guc_variables table is made more dynamic. It is originally created
with 20% slack and can grow dynamically. A capacity is introduced to
avoid resizing every time a new variable is added. guc_variables and
num_guc_variables becomes static (hidden).
The GucInfoMain now uses the new function get_guc_variables() and
GetNumConfigOptions instead or using the guc_variables directly.
The find_option() function, when passed a missing name, will check if
the name is qualified. If the name is qualified and if the qualifier
denotes a class included in the 'custom_variable_classes', a placeholder
variable will be created. Such a placeholder will not participate in a
list operation but will otherwise function as a normal string variable.
Define<type>GucVariable() functions will be added, one for each variable
type. They are inteded to be used by add-on modules like the pl<lang>
mappings. Example:
extern void DefineCustomBoolVariable(
const char* name,
const char* short_desc,
const char* long_desc,
bool* valueAddr,
GucContext context,
GucBoolAssignHook assign_hook,
GucShowHook show_hook);
(I created typedefs for the assign-hook and show-hook functions). A call
to these functions will define a new GUC-variable. If a placeholder
exists it will be replaced but it's value will be used in place of the
default value. The valueAddr is assumed ot point at a default value when
the define function is called. The only constraint that is imposed on a
Custom variable is that its name is qualified.
Finally, a function:
void EmittWarningsOnPlacholders(const char* className)
was added. This function should be called when a module has completed
its variable definitions. At that time, no placeholders should remain
for the class that the module uses. If they do, elog(INFO, ...) messages
will be issued to inform the user that unrecognized variables are
present.
Thomas Hallgren
It was necessary to touch in grammar and create a new node to make home
to the new syntax. The command is also supported in E
CPG. Doc updates are attached too. Only superusers can change the owner
of the database. New owners don't need any aditional
privileges.
Euler Taveira de Oliveira
In the past, we used a 'Lispy' linked list implementation: a "list" was
merely a pointer to the head node of the list. The problem with that
design is that it makes lappend() and length() linear time. This patch
fixes that problem (and others) by maintaining a count of the list
length and a pointer to the tail node along with each head node pointer.
A "list" is now a pointer to a structure containing some meta-data
about the list; the head and tail pointers in that structure refer
to ListCell structures that maintain the actual linked list of nodes.
The function names of the list API have also been changed to, I hope,
be more logically consistent. By default, the old function names are
still available; they will be disabled-by-default once the rest of
the tree has been updated to use the new API names.
database, not just ones that we cons up POSIX names for. This looks
grim but it seems to take less than a second even on a relatively slow
machine, and since it only happens once during postmaster startup, that
seems acceptable.
of correctly identifying the system's daylight-savings transition rules.
This still begs the question of how to look through the zic database to
find a matching zone definition, but at least now we'll have some chance
of recognizing the match when we find it.
ago. This should give significantly better results when the density of
live tuples is not uniform throughout a table. Manfred Koizar, with
minor kibitzing from Tom Lane.
(SIGUSR1, which we have not been using recently) instead of piggybacking
on SIGUSR2-driven NOTIFY processing. This has several good results:
the processing needed to drain the sinval queue is a lot less than the
processing needed to answer a NOTIFY; there's less contention since we
don't have a bunch of backends all trying to acquire exclusive lock on
pg_listener; backends that are sitting inside a transaction block can
still drain the queue, whereas NOTIFY processing can't run if there's
an open transaction block. (This last is a fairly serious issue that
I don't think we ever recognized before --- with clients like JDBC that
tend to sit with open transaction blocks, the sinval queue draining
mechanism never really worked as intended, probably resulting in a lot
of useless cache-reset overhead.) This is the last of several proposed
changes in response to Philip Warner's recent report of sinval-induced
performance problems.
to ExclusiveLock. This still serializes the operations of this module,
but doesn't conflict with concurrent ANALYZE operations. Per trouble
report from Philip Warner a few weeks ago.
functions. This allows these functions to work correctly with Unicode and
other multibyte encodings. Per prior discussion.
Also, revert my earlier change to move installation path mashing from
Makefile.global to configure. Turns out not to work well because configure
script is working with unexpanded variables, and so fails to match in
cases where it should match.
several different module Makefiles with it. Also, do any adjustment
of installation paths during configure, rather than every time Makefile.global
is read.
and should do now that we control our own destiny for timezone handling,
but this commit gets the bulk of the picayune diffs in place.
Magnus Hagander and Tom Lane.
timezone code and other places.
Remove elog() calls from find_my_exec; do fprintf(stderr) instead. We
can then remove the exec.c handling in the makefile because it doesn't
have to be built to suppress elog calls.
a variant of the function for the 'numeric' datatype; it would be possible
to add additional variants for other datatypes, but I haven't done so yet.
This commit includes regression tests and minimal documentation; if we
want developers to actually use this function in applications, we'll
probably need to document what it does more fully.
by Ken Ashcraft's report. I think there is no actual bug here since if
the int32 value does wrap a little bit, palloc will still reject it.
Still it's better that the code be obviously correct.
find_my_exec/find_other_exec(). Remove passing of progname to these
functions as they can find that out from argv[0], which they already
have.
Make get_progname return const char *, and update all progname variables
to be const char *.
all the code that looks for other binaries. I move FindExec into
port/exec.c (and renamed it to find_my_binary()). I also added
find_other_binary that looks for another binary in the same directory as
the calling program, and checks the version string.
The only behavior change was that initdb and pg_dump would look in the
hard-coded bindir directory if it can't find the requested binary in the
same directory as the caller. The new code throws an error. The old
behavior seemed too error prone for version mismatches.
permissions tests in about the same amount of code as before. Exactly what
the GRANT/REVOKE code ought to be doing is still up for debate, but this
should be helpful in any case, and it already solves an efficiency problem
in executor startup.
Didier Moens. Bug is new in 7.4, and was caused by not updating everyplace
I should've when replacing locParam markers by allParam.
Add a regression test to catch related errors in future.
rather than allowing them only in a few special cases as before. In
particular you can now pass a ROW() construct to a function that accepts
a rowtype parameter. Internal generation of RowExprs fixes a number of
corner cases that used to not work very well, such as referencing the
whole-row result of a JOIN or subquery. This represents a further step in
the work I started a month or so back to make rowtype values into
first-class citizens.
This simplifies and speeds up the reader by letting it get the representation
right the first time, rather than correcting it after-the-fact. Also,
after int and OID lists become separate node types per Neil's pending
patch, this will let us treat these lists as just plain Nodes instead
of requiring separate read/write macros the way we have now.
costing us lots more to maintain than it was worth. On shared tables
it was of exactly zero benefit because we couldn't trust it to be
up to date. On temp tables it sometimes saved an lseek, but not often
enough to be worth getting excited about. And the real problem was that
we forced an lseek on every relcache flush in order to update the field.
So all in all it seems best to lose the complexity.
in favor of using the REINDEX TABLE apparatus, which does the same thing
simpler and faster. Also, make TRUNCATE not use cluster.c at all, but
just assign a new relfilenode and REINDEX. This partially addresses
Hartmut Raschick's complaint from last December that 7.4's TRUNCATE is
an order of magnitude slower than prior releases. By getting rid of
a lot of unnecessary catalog updates, these changes buy back about a
factor of two (on my system). The remaining overhead seems associated
with creating and deleting storage files, which we may not be able to
do much about without abandoning transaction safety for TRUNCATE.
conversion of basic ASCII letters. Remove all uses of strcasecmp and
strncasecmp in favor of new functions pg_strcasecmp and pg_strncasecmp;
remove most but not all direct uses of toupper and tolower in favor of
pg_toupper and pg_tolower. These functions use the same notions of
case folding already developed for identifier case conversion. I left
the straight locale-based folding in place for situations where we are
just manipulating user data and not trying to match it to built-in
strings --- for example, the SQL upper() function is still locale
dependent. Perhaps this will prove not to be what's wanted, but at
the moment we can initdb and pass regression tests in Turkish locale.
modify. Also fix a passel of problems with ALTER TABLE CLUSTER ON:
failure to check that the index is safe to cluster on (or even belongs
to the indicated rel, or even exists), and failure to broadcast a relcache
flush event when changing an index's state.
* ALTER ... ADD COLUMN with defaults and NOT NULL constraints works per SQL
spec. A default is implemented by rewriting the table with the new value
stored in each row.
* ALTER COLUMN TYPE. You can change a column's datatype to anything you
want, so long as you can specify how to convert the old value. Rewrites
the table. (Possible future improvement: optimize no-op conversions such
as varchar(N) to varchar(N+1).)
* Multiple ALTER actions in a single ALTER TABLE command. You can perform
any number of column additions, type changes, and constraint additions with
only one pass over the table contents.
Basic documentation provided in ALTER TABLE ref page, but some more docs
work is needed.
Original patch from Rod Taylor, additional work from Tom Lane.
> Please find a attached a small patch that adds accessor functions
> for "aclitem" so that it is not an opaque datatype.
>
> I needed these functions to browse aclitems from user land. I can load
> them when necessary, but it seems to me that these accessors for a
> backend type belong to the backend, so I submit them.
>
> Fabien Coelho
for "aclitem" so that it is not an opaque datatype.
I needed these functions to browse aclitems from user land. I can load
them when necessary, but it seems to me that these accessors for a
backend type belong to the backend, so I submit them.
Fabien Coelho
-D_REENTRANT -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS
for all ports. It can't hurt if they are not supported, but it makes
our job easier for porting.
Should fix Darwin compile and other platforms without mucking with the
thread detection code.
Regression tests and documentation have both been updated.
SQL2003 requires that both ceiling() and ceil() be present, so I have
documented both spellings. SQL2003 doesn't mention pow() as far as I
can see, so I decided to replace pow() with power() in the documentation:
there is little reason to encourage the continued usage of a function
that isn't compliant with the standard, given a standard-compliant
alternative.
RELEASE NOTES: should state that pow() is considered deprecated
(although I don't see the need to ever remove it.)
Allow additional thread flags to be added via port templates.
Change thread flag names to PTHREAD_CFLAGS and PTHREAD_LIBS to match new
configure script.
errors. This is the second submission, which integrates Tom comments about
localisation and exit code. I also added some comments about one sql
command which is not ignored.
Fabien COELHO
the next are handled by ReleaseAndReadBuffer rather than separate
ReleaseBuffer and ReadBuffer calls. This cuts the number of acquisitions
of the BufMgrLock by a factor of 2 (possibly more, if an indexscan happens
to pull successive rows from the same heap page). Unfortunately this
doesn't seem enough to get us out of the recently discussed context-switch
storm problem, but it's surely worth doing anyway.
of whether we have successfully read data into a buffer; this makes the
error behavior a bit more transparent (IMHO anyway), and also makes it
work correctly for local buffers which don't use Start/TerminateBufferIO.
Collapse three separate functions for writing a shared buffer into one.
This overlaps a bit with cleanups that Neil proposed awhile back, but
seems not to have committed yet.
of VACUUM cases so that VACUUM requests don't affect the ARC state at all,
avoid corner case where BufferSync would uselessly rewrite a buffer that
no longer contains the page that was to be flushed. Make some minor
other cleanups in and around the bufmgr as well, such as moving PinBuffer
and UnpinBuffer into bufmgr.c where they really belong.
* removed a few redundant defines
* get_user_name safe under win32
* rationalized pipe read EOF for win32 (UPDATED PATCH USED)
* changed all backend instances of sleep() to pg_usleep
- except for the SLEEP_ON_ASSERT in assert.c, as it would exceed a
32-bit long [Note to patcher: If a SLEEP_ON_ASSERT of 2000 seconds is
acceptable, please replace with pg_usleep(2000000000L)]
I added a comment to that part of the code:
/*
* It would be nice to use pg_usleep() here, but only does 2000 sec
* or 33 minutes, which seems too short.
*/
sleep(1000000);
Claudio Natoli
o -Allow dump/load of CSV format
This adds new keywords to COPY and \copy:
CSV - enable CSV mode (comma separated variable)
QUOTE - specify quote character
ESCAPE - specify escape character
FORCE - force quoting of specified column
LITERAL - suppress null comparison for columns
Doc changes included. Regression updates coming from Andrew.
are sought first as local FROM columns, then as local SELECT-list aliases,
and finally as outer FROM columns; the former behavior made outer FROM
columns take precedence over aliases. This does not change spec
conformance because SQL99 allows only the first case anyway, and it seems
more useful and self-consistent. Per gripe from Dennis Bjorklund 2004-04-05.
It works on the principle of turning sockets into non-blocking, and then
emulate blocking behaviour on top of that, while allowing signals to
run. Signals are now implemented using an event instead of APCs, thus
getting rid of the issue of APCs not being compatible with "old style"
sockets functions.
It also moves the win32 specific code away from pqsignal.h/c into
port/win32, and also removes the "thread style workaround" of the APC
issue previously in place.
In order to make things work, a few things are also changed in pgstat.c:
1) There is now a separate pipe to the collector and the bufferer. This
is required because the pipe will otherwise only be signalled in one of
the processes when the postmaster goes down. The MS winsock code for
select() must have some kind of workaround for this behaviour, but I
have found no stable way of doing that. You really are not supposed to
use the same socket from more than one process (unless you use
WSADuplicateSocket(), in which case the docs specifically say that only
one will be flagged).
2) The check for "postmaster death" is moved into a separate select()
call after the main loop. The previous behaviour select():ed on the
postmaster pipe, while later explicitly saying "we do NOT check for
postmaster exit inside the loop".
The issue was that the code relies on the same select() call seeing both
the postmaster pipe *and* the pgstat pipe go away. This does not always
happen, and it appears that useing WSAEventSelect() makes it even more
common that it does not.
Since it's only called when the process exits, I don't think using a
separate select() call will have any significant impact on how the stats
collector works.
Magnus Hagander
"millennium" date part implementation in postgresql, both in the code
and the documentation, so that it conforms to the official definition.
If you do not agree with the official definition, please send your
complaint to "pope@vatican.org". I'm not responsible for them;-)
With the previous version, the centuries and millenniums had a wrong
number and started the wrong year. Moreover century number 0, which does
not exist in reality, lasted 200 years. Also, millennium number 0 lasted
2000 years.
If you want postgresql to have it's own definition of "century" and
"millennium" that does not conform to the one of the society, just give
them another name. I would suggest "pgCENTURY" and "pgMILLENNIUM";-)
IMO, if someone may use the options, it means that postgresql is used for
historical data, so it make sense to have an historical definition. Also,
I just want to divide the year by 100 or 1000, I can do that quite easily.
BACKWARD INCOMPATIBLE CHANGE
Fabien Coelho - coelho@cri.ensmp.fr
by the set operation, so that redundant sorts at higher levels can be
avoided. This was foreseen a good while back, but not done. Per request
from Karel Zak.
> >>with allowed values of "all, mod, ddl, none" with default "none".
OK, here is a patch that implements #1. Here is sample output:
test=> set client_min_messages = 'log';
SET
test=> set log_statement = 'mod';
SET
test=> select 1;
?column?
----------
1
(1 row)
test=> update test set x=1;
LOG: statement: update test set x=1;
ERROR: relation "test" does not exist
test=> update test set x=1;
LOG: statement: update test set x=1;
ERROR: relation "test" does not exist
test=> copy test from '/tmp/x';
LOG: statement: copy test from '/tmp/x';
ERROR: relation "test" does not exist
test=> copy test to '/tmp/x';
ERROR: relation "test" does not exist
test=> prepare xx as select 1;
PREPARE
test=> prepare xx as update x set y=1;
LOG: statement: prepare xx as update x set y=1;
ERROR: relation "x" does not exist
test=> explain analyze select 1;;
QUERY PLAN
------------------------------------------------------------------------------------
Result (cost=0.00..0.01 rows=1 width=0) (actual time=0.006..0.007 rows=1 loops=1)
Total runtime: 0.046 ms
(2 rows)
test=> explain analyze update test set x=1;
LOG: statement: explain analyze update test set x=1;
ERROR: relation "test" does not exist
test=> explain update test set x=1;
ERROR: relation "test" does not exist
It checks PREPARE and EXECUTE ANALYZE too. The log_statement values are
'none', 'mod', 'ddl', and 'all'. For 'all', it prints before the query
is parsed, and for ddl/mod, it does it right after parsing using the
node tag (or command tag for CREATE/ALTER/DROP), so any non-parse errors
will print after the log line.
That particular corner case is not exactly compelling, but given 7.4's
ability to discard redundant join clauses, it is possible for the situation
to arise from queries that are not so obviously silly. Per bug report
of 6-Apr-04.
the COPY NULL string:
test=> copy pg_language to '/tmp/x' with delimiter '|';
COPY
test=> copy pg_language to '/tmp/x' with delimiter '|' null '|x';
ERROR: COPY delimiter must not appear in the NULL specification
test=> copy pg_language from '/tmp/x' with delimiter '|' null '|x';
ERROR: COPY delimiter must not appear in the NULL specification
It also throws an error if it conflicts with the default NULL string:
test=> copy pg_language to '/tmp/x' with delimiter '\\';
ERROR: COPY delimiter must not appear in the NULL specification
test=> copy pg_language to '/tmp/x' with delimiter '\\' NULL 'x';
COPY
'SELECT foo()' in a SQL function returning a rowtype, to simply pass
back the results of another function returning the same rowtype.
However, that hasn't actually worked in many years. Now it works again.
results with tuples as ordinary varlena Datums. This commit does not
in itself do much for us, except eliminate the horrid memory leak
associated with evaluation of whole-row variables. However, it lays the
groundwork for allowing composite types as table columns, and perhaps
some other useful features as well. Per my proposal of a few days ago.
boxes. Change interface to user-defined GiST support methods union and
picksplit. Now instead of bytea struct it used special GistEntryVector
structure.
same path keys and nearly equivalent costs will be considered redundant.
The exact nature of the fuzziness may get adjusted later based on current
discussions, but no one has shot a hole in the basic idea yet ...
only stable and not immutable, pred_test_simple_clause has to guard
against making invalid deductions. Add a test for immutability of
the selected test_op.
a whole row or record variable into a SQL function. Eventually this case
should be made to actually work, but for now this is better than what it
did before.
is measured in kilobytes and checked against actual physical execution
stack depth, as per my proposal of 30-Dec. This gives us a fairly
bulletproof defense against crashing due to runaway recursive functions.
>>equivalent to "-h localhost", shouldn't it?
>>
>>
>
>Now that is something I had not thought of. Seems we can assume a Win32
>psql can never use unix domain sockets, so defaulting that to localhost
>is a good solution too.
Andrew Dunstan
WITH/WITHOUT OIDS in dump files. This makes dump files more portable.
I have updated the pg_dump version so old binary dumps will load fine.
Pre-7.5 dumps use WITHOUT OIDS in SQL were needed, so they should be
fine.
in s_lock.c were not updated, and still refers to select. Made my grep
hit the wrong files, so I figured a simple patch was in order.. (other
refs in the same comment block was changed..)
Magnus Hagander
remove separate implementation of ALTER TABLE SET WITHOUT OIDS in favor
of doing a regular DROP. Also, cause CREATE TABLE to account completely
correctly for the inheritance status of the OID column. This fixes
problems with dropping OID columns that have dependencies, as noted by
Christopher Kings-Lynne, as well as making sure that you can't drop an
OID column that was inherited from a parent.
listen_addresses parameter, as per recent discussion. The default behavior
is now to listen on localhost, which eliminates the need for the -i
postmaster switch in many scenarios.
Andrew Dunstan
in one query, rather than making a separate query for each object that
could have a comment. This costs relatively little space (a few tens of
K typically) and saves substantial time in databases with many objects.
I find it reduces the runtime of 'pg_dump -s regression' by about a
third.
is done at creation time for plpgsql functions. Improve createlang and
droplang to support adding/dropping validators for PLs. Initial steps
towards producing a syntax error position from plpgsql syntax errors
(this part is a work in progress, and will change depending on outcome
of current discussions).
of fighting it, avoid hard-wired (and wrong) assumption about max length
of prefix, cause %l to actually work as documented, don't compute data
we may not need.
Compare fsync before and after write's close:
Compare one o_sync write to two:
Compare file sync methods with one 8k write:
Compare file sync methods with 2 8k writes:
TID (heap position). This doesn't do anything to the validity of the
finished index, but by pretending to qsort() that there are no really
equal keys in the sort, we can avoid performance problems with qsort
implementations that have trouble with large numbers of equal keys.
Patch from Manfred Koizar.
so that the 'val' is computed only once, per recent discussion. The
speedup is not much when 'val' is just a simple variable, but could be
significant for larger expressions. More importantly this avoids issues
with multiple evaluations of a volatile 'val', and it allows the CASE
expression to be reverse-listed in its original form by ruleutils.c.
directly to the appropriate per-node execution function, using a function
pointer stored by ExecInitExpr. This speeds things up by eliminating one
level of function call. The function-pointer technique also enables further
small improvements such as only making one-time tests once (and then
changing the function pointer). Overall this seems to gain about 10%
on evaluation of simple expressions, which isn't earthshaking but seems
a worthwhile gain for a relatively small hack. Per recent discussion
on pghackers.
i've attached this again.
Additionally I include a small patch to remove mutex locking when a
DEFAULT/NULL connection is being retrieved. This is consistent with
libpq.
Lee Kindness
that by querying the environment explicitly first for LC_COLLATE and
LC_CTYPE. We have to do this because initdb passes those values in the
environment. If there is nothing there we fall back on the codepage.
Andrew Dunstan
implemented casts to varchar and bpchar using a cast-to-text function.
This is a holdover from before we had pg_cast; it now makes more sense
to just list these casts in pg_cast. While at it, add pg_cast entries
for the other direction (casts from varchar/bpchar) where feasible.
> possibly should look there too.)
[snip]
>
I think I have the fix for part of it, but this remains...
gcc -O2 -fno-strict-aliasing -Wall -Wmissing-prototypes
-Wmissing-declarations -fPIC -I. -I../../../src/include
-D_POSIX_PTHREAD_SEMANTICS -DFRONTEND
-DSYSCONFDIR='"/usr/local/pgsql/etc"' -c -o thread.o thread.c
thread.c: In function `pqGethostbyname':
thread.c:189: error: `resbuf' undeclared (first use in this
function)
Looking at src/port/thread.c, line 189, it looks like somebody typo'd.
Looks like that second parameter should be "resultbuf", not "resbuf"?
Jim Seymour
In particular, don't depend on strtod() to accept 'NaN' and 'Infinity'
inputs (while this is required by C99, not all platforms are compliant
with that yet). Also, don't require glibc's behavior from isinf():
it seems that on a lot of platforms isinf() does not itself distinguish
between negative and positive infinity.
discussions. Patch by Fabien Coelho and Tom Lane. Still needs to be
taught about multi-screen-column kanji characters; Tatsuo has promised
to provide the needed infrastructure for that.
message that is reporting a prechecking error in a SQL function.
This is to cue client-side code that the syntax error position,
if any, is with respect to the function body and not the outer command.
incompatible enough to prevent indexscanning the referenced table. Also,
improve the error message that pops out when we can't implement the FK at
all for lack of a usable equality operator. Fabien Coelho, with some review
by Tom Lane.
7.4 rewrite for hashed aggregate support. If the transition data type
is pass-by-reference, the transValue must be pfreed when starting a new
group boundary, else we have a one-value-per-group leakage. Thanks to
Rae Steining for providing a reproducible test case.
[ Note: int8-exp-three-digits.out needs the same treatment]
Will review recent changes for float4/8 and implications for win32 when
I get a chance.
Claudio Natoli