While SH_STAT() is only used for debugging, the allocated array can be large,
and therefore should be freed.
It's unclear why coverity started warning now.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Reported-by: Coverity
Discussion: https://postgr.es/m/3005248.1712538233@sss.pgh.pa.us
Backpatch: 12-
Compute size first, then allocate, then update the structure.
Previously, an out-of-memory when growing could leave the hashtable in
an inconsistent state.
Discussion: https://postgr.es/m/20231117201334.eyb542qr5yk4gilq@awork3.anarazel.de
Reviewed-by: Andres Freund
Reviewed-by: Gurjeet Singh
Casting the result of palloc etc. to the intended type is more per
project style anyway.
(The fact that cpluspluscheck doesn't notice these problems is
because it doesn't expand any macros, which seems like a troubling
shortcoming. Don't have a good idea about improving that.)
Back-patch to v13, which is as far as the patch applies cleanly;
doesn't seem worth working harder.
David Geier
Discussion: https://postgr.es/m/aa5d88a3-71f4-3455-11cf-82de0372c941@gmail.com
In a similar effort to f01592f91, here we mostly rename shadowed local
variables to remove the warnings produced when compiling with
-Wshadow=compatible-local.
This fixes 63 warnings and leaves just 5.
Author: Justin Pryzby, David Rowley
Reviewed-by: Justin Pryzby
Discussion https://postgr.es/m/20220817145434.GC26426%40telsasoft.com
Get rid of the separate "FATAL" log level, as it was applied
so inconsistently as to be meaningless. This mostly involves
s/pg_log_fatal/pg_log_error/g.
Create a macro pg_fatal() to handle the common use-case of
pg_log_error() immediately followed by exit(1). Various
modules had already invented either this or equivalent macros;
standardize on pg_fatal() and apply it where possible.
Invent the ability to add "detail" and "hint" messages to a
frontend message, much as we have long had in the backend.
Except where rewording was needed to convert existing coding
to detail/hint style, I have (mostly) resisted the temptation
to change existing message wording.
Patch by me. Design and patch reviewed at various stages by
Robert Haas, Kyotaro Horiguchi, Peter Eisentraut and
Daniel Gustafsson.
Discussion: https://postgr.es/m/1363732.1636496441@sss.pgh.pa.us
The code does not expect sh_error() to return, but the patch
that made this header usable in frontend didn't get that memo.
While here, plaster unlikely() on the tests that decide whether
to invoke sh_error(), and add our standard copyright notice.
Noted by Andres Freund. Back-patch to v13 where this frontend
support came in.
Discussion: https://postgr.es/m/0D54435C-1199-4361-9D74-2FBDCF8EA164@anarazel.de
I just got burnt by trying to use pg_malloc instead of pg_malloc0
with this. Save the next hacker some time by not leaving this
API detail undocumented.
This fixes a bug in simplehash.h which caused an incorrect size mask to be
used when the hash table grew to SH_MAX_SIZE (2^32). The code was
incorrectly setting the size mask to 0 when the hash tables reached the
maximum possible number of buckets. This would result always trying to
use the 0th bucket causing an infinite loop of trying to grow the hash
table due to there being too many collisions.
Seemingly it's not that common for simplehash tables to ever grow this big
as this bug dates back to v10 and nobody seems to have noticed it before.
However, probably the most likely place that people would notice it would
be doing a large in-memory Hash Aggregate with something close to at least
2^31 groups.
After this fix, the code now works correctly with up to within 98% of 2^32
groups and will fail with the following error when trying to insert any
more items into the hash table:
ERROR: hash table size exceeded
However, the work_mem (or hash_mem_multiplier in newer versions) settings
will generally cause Hash Aggregates to spill to disk long before reaching
that many groups. The minimal test case I did took a work_mem setting of
over 192GB to hit the bug.
simplehash hash tables are used in a few other places such as Bitmap Index
Scans, however, again the size that the hash table can become there is
also limited to work_mem and it would take a relation of around 16TB
(2^31) pages and a very large work_mem setting to hit this. With smaller
work_mem values the table would become lossy and never grow large enough
to hit the problem.
Author: Yura Sokolov
Reviewed-by: David Rowley, Ranier Vilela
Discussion: https://postgr.es/m/b1f7f32737c3438136f64b26f4852b96@postgrespro.ru
Backpatch-through: 10, where simplehash.h was added
Previously simplehash.h only exposed a method to perform a hash table
delete using the hash table key. This meant that the delete function had
to perform a hash lookup in order to find the entry to delete. Here we
add a new function so that users of simplehash.h can perform a hash delete
directly using the entry pointer, thus saving the hash lookup.
An upcoming patch that uses simplehash.h already has performed the hash
lookup so already has the entry pointer. This change will allow the
code in that patch to perform the hash delete without the code in
simplehash.h having to perform an additional hash lookup.
Author: David Rowley
Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/CAApHDvqFLXXge153WmPsjke5VGOSt7Ez0yD0c7eBXLfmWxs3Kw@mail.gmail.com
When reading the code it's not obvious when one should prefer dynahash
over simplehash and vice-versa, so, for programmer-friendliness, add
comments to inform that decision.
Show sample simplehash method signatures.
Author: James Coleman <jtc331@gmail.com>
Discussion: https://postgr.es/m/CAAaqYe_dOF39gAJ8rL-a3YO3Qo96MHMRQ2whFjK5ZcU6YvMQSA%40mail.gmail.com
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
First pass of modifying various places that obtain the next power of 2 of
a number and make them use the new functions added in pg_bitutils.h
instead.
This also removes the _hash_log2() function. There are no longer any
callers in core. Other users can swap their _hash_log2(n) call to make use
of pg_ceil_log2_32(n).
Author: David Fetter, with some minor adjustments by me
Reviewed-by: John Naylor, Jesse Zhang
Discussion: https://postgr.es/m/20200114173553.GE32763%40fetter.org
Commit 48995040d5 removed the largest
barrier to use of simplehash in frontend code, but there's one more
problem: it uses elog(ERROR, ...) or elog(LOG, ...) in a couple of
places. Work around that by changing those to pg_log_error() and
pg_log_info() when FRONTEND is defined.
Patch by me, reviewed by Andres Freund.
Discussion: http://postgr.es/m/CA+Tgmob8oyh02NrZW=xCScB+5GyJ-jVowE3+TWTUmPF=FsGWTA@mail.gmail.com
If the SH_RAW_ALLOCATOR is defined, it will be used to allocate bytes
for the hash table, and no dependencies on MemoryContext will exist.
This means, in particular, that the SH_CREATE function will not take
a MemoryContext argument.
Patch by me, reviewed by Andres Freund.
Discussion: http://postgr.es/m/CA+Tgmob8oyh02NrZW=xCScB+5GyJ-jVowE3+TWTUmPF=FsGWTA@mail.gmail.com
Add _lookup_hash and _insert_hash functions for callers that have
already calculated the hash value of the key.
The immediate use case is for hash algorithms that write to disk in
partitions. The hash value can be calculated once, used to perform a
lookup, used to select the partition, then written to the partition
along with the tuple. When the tuple is read back, the hash value does
not need to be recalculated.
Author: Jeff Davis
Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/48abe675e1330f0c264ab2fe0d4ff23eb244f9ef.camel%40j-davis.com
Fix reference to non-existent file in comment.
Add SH_ prefix to the EMPTY and IN_USE tokens, to reduce likelihood of
collisions with unrelated macros.
Add include guards around the function definitions that are not
"parameterized", so the header can be used again in the same translation
unit.
Undefine SH_EQUAL macro where other "parameter" macros are undefined, for
the same reason.
Author: Thomas Munro
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/CAEepm%3D1LdXZ3mMTM8tHt_b%3DK1kREit%3Dp8sikesak%3DkzHHM07Nw%40mail.gmail.com
In cases where simplehash tables where filled with either a lot of
conflicting hash-values, or values that hash to consecutive
values (i.e. build "chains") the growth heuristics in
d4c62a6b62 could trigger rather
explosively.
To fix that, address some of the reasons (see previous commit) of why
the growth heuristics where needed, and only allow growth when the
table isn't too empty. While that means there's a few cases of bad
input that can be slower, that seems a lot better than running very
quickly out of memory.
Author: Tomas Vondra and Andres Freund, with additional input by
Thomas Munro, Tom Lane Todd A. Cook
Reported-By: Todd A. Cook, Tomas Vondra, Thomas Munro
Discussion: https://postgr.es/m/20171127185700.1470.20362@wrigleys.postgresql.org
Backpatch: 10, where simplehash was introduced
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Increase the size when either the distance between actual and optimal
slot grows too large, or when too many subsequent entries would have
to be moved.
This addresses reports that the simplehash performed, sometimes
considerably, worse than dynahash.
The reason turned out to be that insertions into the hashtable where,
due to the use of parallel query, in effect done from another
hashtable, in hash-value order. If the target hashtable, due to
mis-estimation, was sized a lot smaller than the source table(s) that
lead to very imbalanced tables; a lot of entries in many close-by
buckets from the source tables were inserted into a single, wider,
bucket on the target table. As the growth factor was solely computed
based on the fillfactor, the performance of the table decreased
further and further.
b81b5a96f4 was an attempt to address this problem for hash
aggregates (but not for bitmap scans), but it turns out that the
current method of mixing hash values often actually leaves neighboring
hash-values close to each other, just in different value range. It
might be worth revisiting that independently of the performance issues
addressed in this patch..
To address that problem resize tables in two additional cases: Firstly
when the optimal position for an entry would be far from the actual
position, secondly when many entries would have to be moved to make
space for the new entry (while satisfying the robin hood property).
Due to the additional resizing threshold it seems possible, and
testing confirms that so far, that a higher fillfactor doesn't hurt
performance and saves a bit of memory. It seems better to increase it
now, before a release containing any of this code, rather than wonder
in some later release.
The various boundaries aren't determined in a particularly scientific
manner, they might need some fine-tuning.
In all my tests the new code now, even with parallelism, performs at
least as good as the old code, in several scenarios significantly
better.
Reported-By: Dilip Kumar, Robert Haas, Kuntal Ghosh
Discussion:
https://postgr.es/m/CAFiTN-vagvuAydKG9VnWcoK=ADAhxmOa4ZTrmNsViBBooTnriQ@mail.gmail.comhttps://postgr.es/m/CAGz5QC+=fNTYgzMLTBUNeKt6uaWZFXJbkB5+7oWm-n9DwVxcLA@mail.gmail.com
Even if we don't emit definitions for SH_ALLOCATE and SH_FREE, we
still need prototypes. The user can't define them before including
simplehash.h because SH_TYPE isn't available yet.
For the allocator to be able to access private_data, it needs to
become an argument to SH_CREATE. Previously we relied on callers
to set that after returning from SH_CREATE, but SH_CREATE calls
SH_ALLOCATE before returning.
Dilip Kumar, reviewed by me.
This is infrastructure for a pending patch to allow parallel bitmap
heap scans.
Dilip Kumar, reviewed (in earlier versions) by Andres Freund and
(more recently) by me. Some further renaming by me, also.
dynahash.c hash tables aren't quite fast enough for some
use-cases. There are several reasons for lacking performance:
- the use of chaining for collision handling makes them cache
inefficient, that's especially an issue when the tables get bigger.
- as the element sizes for dynahash are only determined at runtime,
offset computations are somewhat expensive
- hash and element comparisons are indirect function calls, causing
unnecessary pipeline stalls
- it's two level structure has some benefits (somewhat natural
partitioning), but increases the number of indirections
to fix several of these the hash tables have to be adjusted to the
individual use-case at compile-time. C unfortunately doesn't provide a
good way to do compile code generation (like e.g. c++'s templates for
all their weaknesses do). Thus the somewhat ugly approach taken here is
to allow for code generation using a macro-templatized header file,
which generates functions and types based on a prefix and other
parameters.
Later patches use this infrastructure to use such hash tables for
tidbitmap.c (bitmap scans) and execGrouping.c (hash aggregation,
...). In queries where these use up a large fraction of the time, this
has been measured to lead to performance improvements of over 100%.
There are other cases where this could be useful (e.g. catcache.c).
The hash table design chosen is a variant of linear open-addressing. The
biggest disadvantage of simple linear addressing schemes are highly
variable lookup times due to clustering, and deletions leaving a lot of
tombstones around. To address these issues a variant of "robin hood"
hashing is employed. Robin hood hashing optimizes chaining lengths by
moving elements close to their optimal bucket ("rich" elements), out of
the way if a to-be-inserted element is further away from its optimal
position (i.e. it's "poor"). While that can make insertions slower, the
average lookup performance is a lot better, and higher fill factors can
be used in a still performant manner. To avoid tombstones - which
normally solve the issue that a deleted node's presence is relevant to
determine whether a lookup needs to continue looking or is done -
buckets following a deleted element are shifted backwards, unless
they're empty or already at their optimal position.
There's further possible improvements that can be made to this
implementation. Amongst others:
- Use distance as a termination criteria during searches. This is
generally a good idea, but I've been able to see the overhead of
distance calculations in some cases.
- Consider combining the 'empty' status into the hashvalue, and enforce
storing the hashvalue. That could, in some cases, increase memory
density and remove a few instructions.
- Experiment further with the, very conservatively choosen, fillfactor.
- Make maximum size of hashtable configurable, to allow storing very
very large tables. That'd require 64bit hash values to be more common
than now, though.
- some smaller memcpy calls could be optimized to copy larger chunks
But since the new implementation is already considerably faster than
dynahash it seem sensible to start using it.
Reviewed-By: Tomas Vondra
Discussion: <20160727004333.r3e2k2y6fvk2ntup@alap3.anarazel.de>
Andres Freund
Bruce Momjian
Peter Eisentraut
Jeff Davis
Daniel Gustafsson
Tom Lane
David Rowley
Thomas Munro
Michael Paquier
Robert Haas
Magnus Hagander
Heikki Linnakangas
Peter Eisentraut