Oversight in commit e2f0f8ed. Also add this file to the exclusion lists
in headerscheck and cpluscpluscheck, because Unix systems don't have a
header it includes.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/2760528.1641929756%40sss.pgh.pa.us
The point of this patch is to reduce inclusion spam by not needing
to #include <netdb.h> or <pwd.h> in port.h (which is read by every
compile in our tree). To do that, we must remove port.h's
declarations of pqGetpwuid and pqGethostbyname.
pqGethostbyname is only used, and is only ever likely to be used,
in src/port/getaddrinfo.c --- which isn't even built on most
platforms, making pqGethostbyname dead code for most people.
Hence, deal with that by just moving it into getaddrinfo.c.
To clean up pqGetpwuid, invent a couple of simple wrapper
functions with less-messy APIs. This allows removing some
duplicate error-handling code, too.
In passing, remove thread.c from the MSVC build, since it
contains nothing we use on Windows.
Noted while working on 376ce3e40.
Discussion: https://postgr.es/m/1634252654444.90107@mit.edu
The existing cryptohash facility was causing problems in some code paths
related to MD5 (frontend and backend) that relied on the fact that the
only type of error that could happen would be an OOM, as the MD5
implementation used in PostgreSQL ~13 (the in-core implementation is
used when compiling with or without OpenSSL in those older versions),
could fail only under this circumstance.
The new cryptohash facilities can fail for reasons other than OOMs, like
attempting MD5 when FIPS is enabled (upstream OpenSSL allows that up to
1.0.2, Fedora and Photon patch OpenSSL 1.1.1 to allow that), so this
would cause incorrect reports to show up.
This commit extends the cryptohash APIs so as callers of those routines
can fetch more context when an error happens, by using a new routine
called pg_cryptohash_error(). The error states are stored within each
implementation's internal context data, so as it is possible to extend
the logic depending on what's suited for an implementation. The default
implementation requires few error states, but OpenSSL could report
various issues depending on its internal state so more is needed in
cryptohash_openssl.c, and the code is shaped so as we are always able to
grab the necessary information.
The core code is changed to adapt to the new error routine, painting
more "const" across the call stack where the static errors are stored,
particularly in authentication code paths on variables that provide
log details. This way, any future changes would warn if attempting to
free these strings. The MD5 authentication code was also a bit blurry
about the handling of "logdetail" (LOG sent to the postmaster), so
improve the comments related that, while on it.
The origin of the problem is 87ae969, that introduced the centralized
cryptohash facility. Extra changes are done for pgcrypto in v14 for the
non-OpenSSL code path to cope with the improvements done by this
commit.
Reported-by: Michael Mühlbeyer
Author: Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/89B7F072-5BBE-4C92-903E-D83E865D9367@trivadis.com
Backpatch-through: 14
Try to disable ASLR when building in EXEC_BACKEND mode, to avoid random
memory mapping failures while testing. For developer use only, no
effect on regular builds.
Suggested-by: Andres Freund <andres@anarazel.de>
Tested-by: Bossart, Nathan <bossartn@amazon.com>
Discussion: https://postgr.es/m/20210806032944.m4tz7j2w47mant26%40alap3.anarazel.de
Instead of using a hardcoded or default path to the perl file the .bat
file is a wrapper for, we use a path that means the file is found in
the same directory as the .bat file.
Patch by Anton Voloshin, slightly tweaked by me.
Backpatch to all live branches
Discussion: https://postgr.es/m/2b7a674b-5fb0-d264-75ef-ecc7a31e54f8@postgrespro.ru
Commit db7d1a7b05 missed a couple of places that needed adjustment now
we are not building pgcrypto when openssl is not configured, causing
contrib installcheck to fail in such a case.
Currently FreeBSD, Linux, macOS and Windows (Visual Studio) are tested.
The main goal of this integration is to make it easier to test in-development
patches across multiple platforms. This includes improving the testing done
automatically by cfbot [1] for commitfest entries. It is *not* the goal to
supersede the buildfarm.
cirrus-ci [2] was chosen because it was already in use for cfbot, allows using
full VMs, has good OS coverage and allows accessing the full test results
without authentication (like a github account). It might be worth adding
support for further CI providers, particularly ones supporting other git
forges, in the future.
To keep CI times tolerable, most platforms use pre-generated images. Some
platforms use containers, others use full VMs.
For instructions on how to enable the CI integration in a repository and
further details, see src/tools/ci/README
[1] http://cfbot.cputube.org/
[2] https://cirrus-ci.org/
Author: Andres Freund <andres@anarazel.de>
Author: Thomas Munro <tmunro@postgresql.org>
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-By: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-By: Thomas Munro <tmunro@postgresql.org>
Reviewed-By: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20211001222752.wrz7erzh4cajvgp6@alap3.anarazel.de
This commit moves parallel vacuum related code to a new file
commands/vacuumparallel.c so that any table AM supporting indexes can
utilize parallel vacuum in order to call index AM callbacks (ambulkdelete
and amvacuumcleanup) with parallel workers.
Another reason for this refactoring is that the parallel vacuum isn't
specific to heap so it doesn't make sense to keep this code in
heap/vacuumlazy.c.
Author: Masahiko Sawada, based on suggestion from Andres Freund
Reviewed-by: Hou Zhijie, Amit Kapila, Haiying Tang
Discussion: https://www.postgresql.org/message-id/20211030212101.ae3qcouatwmy7tbr%40alap3.anarazel.de
This is an option consistent with what the other tools of src/bin/
(pg_checksums, pg_dump, pg_rewind and pg_basebackup) provide which is
useful for leveraging the I/O effort when testing things. This is not
to be used in a production environment.
All the regression tests of pg_upgrade are updated to use this new
option. This happens to cut at most a couple of seconds in environments
constrained on I/O, by avoiding a flush of data folder for the new
cluster upgraded.
Author: Michael Paquier
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/YbrhzuBmBxS/DkfX@paquier.xyz
Previously, in parallel vacuum, we allocated shmem area of
IndexBulkDeleteResult only for indexes where parallel index vacuuming is
safe and had null-bitmap in shmem area to access them. This logic was too
complicated with a small benefit of saving only a few bits per indexes.
In this commit, we allocate a dedicated shmem area for the array of
LVParallelIndStats that includes a parallel-safety flag, the index vacuum
status, and IndexBulkdeleteResult. There is one array element for every
index, even those indexes where parallel index vacuuming is unsafe or not
worthwhile. This commit makes the code clear by removing all
bitmap-related code.
Also, add the check each index vacuum status after parallel index vacuum
to make sure that all indexes have been processed.
Finally, rename parallel vacuum functions to parallel_vacuum_* for
consistency.
Author: Masahiko Sawada, based on suggestions by Andres Freund
Reviewed-by: Hou Zhijie, Amit Kapila
Discussion: https://www.postgresql.org/message-id/20211030212101.ae3qcouatwmy7tbr%40alap3.anarazel.de
edc2332 has introduced in vcregress.pl some control on the environment
variables LZ4, TAR and GZIP_PROGRAM to allow any TAP tests to be able
use those commands. This makes the settings more consistent with
src/Makefile.global.in, as the same default gets used for Make and MSVC
builds.
Each parameter can be changed in buildenv.pl, but as a default gets
assigned after loading buldenv.pl, it is not possible to unset any of
these, and using an empty value would not work with "||=" either. As
some environments may not have a compatible command in their PATH (tar
coming from MinGW is an issue, for one), this could break tests without
an exit path to bypass any failing test. This commit changes things so
as the default values for LZ4, TAR and GZIP_PROGRAM are assigned before
loading buildenv.pl, not after. This way, we keep the same amount of
compatibility as a GNU build with the same defaults, and it becomes
possible to unset any of those values.
While on it, this adds some documentation about those three variables in
the section dedicated to the TAP tests for MSVC.
Per discussion with Andrew Dunstan.
Discussion: https://postgr.es/m/YbGYe483803il3X7@paquier.xyz
Backpatch-through: 10
1. Update our open() wrapper to check for NT's STATUS_DELETE_PENDING
and translate it to Unix-like errors. This is done with
RtlGetLastNtStatus(), which is dynamically loaded from ntdll. A new
file win32ntdll.c centralizes lookup of NT functions, in case we decide
to add more in the future.
2. Remove non-working code that was trying to do something similar for
stat(), and just reuse the open() wrapper code. As a side effect,
stat() also gains resilience against "sharing violation" errors.
3. Since stat() is used very early in process startup, remove the
requirement that the Win32 signal event has been created before
pgwin32_open_handle() is reached. Instead, teach pg_usleep() to fall
back to a non-interruptible sleep if reached before the signal event is
available.
This could be back-patched, but for now it's in master only. The
problem has apparently been with us for a long time and generated only a
few complaints. Proposed patches trigger it more often, which led to
this investigation and fix.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Juan José Santamaría Flecha <juanjo.santamaria@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKGJz_pZTF9mckn6XgSv69%2BjGwdgLkxZ6b3NWGLBCVjqUZA%40mail.gmail.com
Certain settings from configuration or the Makefile infrastructure are
used by the TAP tests, but were not being set up by vcregress.pl. This
remedies those omissions. This should increase test coverage, especially
on the buildfarm.
Reviewed by Noah Misch
Discussion: https://postgr.es/m/17093da5-e40d-8335-d53a-2bd803fc38b0@dunslane.net
Backpatch to all live branches.
The C4101 warning for unused variable cannot be individually suppressed
with PG_USED_FOR_ASSERTS_ONLY, and thus cause false-positive warnings
for variables which are defined but only read/written in an assertion.
Until a satisfactory solution for per-variable suppression like how we
do for gcc and clang, disable the warning.
Discussion: https://postgr.es/m/CAJcOf-c+KniGAp31pn8TC=9a-WHXpkX-3+8-2BkaCsZchhu=8w@mail.gmail.com
This commit adds a new system view pg_stat_subscription_workers, that
shows information about any errors which occur during the application of
logical replication changes as well as during performing initial table
synchronization. The subscription statistics entries are removed when the
corresponding subscription is removed.
It also adds an SQL function pg_stat_reset_subscription_worker() to reset
single subscription errors.
The contents of this view can be used by an upcoming patch that skips the
particular transaction that conflicts with the existing data on the
subscriber.
This view can be extended in the future to track other xact related
statistics like the number of xacts committed/aborted for subscription
workers.
Author: Masahiko Sawada
Reviewed-by: Greg Nancarrow, Hou Zhijie, Tang Haiying, Vignesh C, Dilip Kumar, Takamichi Osumi, Amit Kapila
Discussion: https://postgr.es/m/CAD21AoDeScrsHhLyEPYqN3sydg6PxAPVBboK=30xJfUVihNZDA@mail.gmail.com
Standardize on xoroshiro128** as our basic PRNG algorithm, eliminating
a bunch of platform dependencies as well as fundamentally-obsolete PRNG
code. In addition, this API replacement will ease replacing the
algorithm again in future, should that become necessary.
xoroshiro128** is a few percent slower than the drand48 family,
but it can produce full-width 64-bit random values not only 48-bit,
and it should be much more trustworthy. It's likely to be noticeably
faster than the platform's random(), depending on which platform you
are thinking about; and we can have non-global state vectors easily,
unlike with random(). It is not cryptographically strong, but neither
are the functions it replaces.
Fabien Coelho, reviewed by Dean Rasheed, Aleksander Alekseev, and myself
Discussion: https://postgr.es/m/alpine.DEB.2.22.394.2105241211230.165418@pseudo
Documentation and any code paths related to VS are updated to keep the
whole consistent. Similarly to 2017 and 2019, the version of VS and the
version of nmake that we use to determine which code paths to use for
the build are still inconsistent in their own way.
Backpatch down to 10, so as buildfarm members are able to use this new
version of Visual Studio on all the stable branches supported.
Author: Hans Buschmann
Discussion: https://postgr.es/m/1633101364685.39218@nidsa.net
Backpatch-through: 10
This check was used to accommodate a staggering variety in particular
in the type of the third argument of accept(). This is no longer of
concern on currently supported systems. We can just use socklen_t in
the code and put in a simple check that substitutes int for socklen_t
if it's missing, to cover the few stragglers.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/3538f4c4-1886-64f2-dcff-aaad8267fb82@enterprisedb.com
Commit db7d1a7b0 pulled out Mkvcbuild.pm's custom support for building
contrib/pgcrypto, but neglected to inform it that that module can now
be built normally. Or at least I guess it can now be built normally.
But this is definitely causing bowerbird to fail, since it's trying to
test a module it hasn't built.
Commit 23a1c6578 thought it'd be cute to refactor
pg_basebackup/Makefile with a new variable BBOBJS,
but our MSVC build system knows nothing of that.
Per buildfarm.
pgcrypto had internal implementations of some encryption algorithms,
as an alternative to calling out to OpenSSL. These were rarely used,
since most production installations are built with OpenSSL. Moreover,
maintaining parallel code paths makes the code more complex and
difficult to maintain.
This patch removes these internal implementations. Now, pgcrypto is
only built if OpenSSL support is configured.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://www.postgresql.org/message-id/flat/0b42f1df-8cba-6a30-77d7-acc241cc88c1%40enterprisedb.com
pg_receivewal includes since cada1af the option --compress, to allow the
compression of WAL segments using gzip, with a value of 0 (the default)
meaning that no compression can be used.
This commit introduces a new option, called --compression-method, able
to use as values "none", the default, and "gzip", to make things more
extensible. The case of --compress=0 becomes fuzzy with this option
layer, so we have made the choice to make pg_receivewal return an error
when using "none" and a non-zero compression level, meaning that the
authorized values of --compress are now [1,9] instead of [0,9]. Not
specifying --compress with "gzip" as compression method makes
pg_receivewal use the default of zlib instead (Z_DEFAULT_COMPRESSION).
The code in charge of finding the streaming start LSN when scanning the
existing archives is refactored and made more extensible. While on it,
rename "compression" to "compression_level" in walmethods.c, to reduce
the confusion with the introduction of the compression method, even if
the tar method used by pg_basebackup does not rely on the compression
method (yet, at least), but just on the compression level (this area
could be improved more, actually).
This is in preparation for an upcoming patch that adds LZ4 support to
pg_receivewal.
Author: Georgios Kokolatos
Reviewed-by: Michael Paquier, Jian Guo, Magnus Hagander, Dilip Kumar,
Robert Haas
Discussion: https://postgr.es/m/ZCm1J5vfyQ2E6dYvXz8si39HQ2gwxSZ3IpYaVgYa3lUwY88SLapx9EEnOf5uEwrddhx2twG7zYKjVeuP5MwZXCNPybtsGouDsAD1o2L_I5E=@pm.me
A new option "FOR ALL TABLES IN SCHEMA" in Create/Alter Publication allows
one or more schemas to be specified, whose tables are selected by the
publisher for sending the data to the subscriber.
The new syntax allows specifying both the tables and schemas. For example:
CREATE PUBLICATION pub1 FOR TABLE t1,t2,t3, ALL TABLES IN SCHEMA s1,s2;
OR
ALTER PUBLICATION pub1 ADD TABLE t1,t2,t3, ALL TABLES IN SCHEMA s1,s2;
A new system table "pg_publication_namespace" has been added, to maintain
the schemas that the user wants to publish through the publication.
Modified the output plugin (pgoutput) to publish the changes if the
relation is part of schema publication.
Updates pg_dump to identify and dump schema publications. Updates the \d
family of commands to display schema publications and \dRp+ variant will
now display associated schemas if any.
Author: Vignesh C, Hou Zhijie, Amit Kapila
Syntax-Suggested-by: Tom Lane, Alvaro Herrera
Reviewed-by: Greg Nancarrow, Masahiko Sawada, Hou Zhijie, Amit Kapila, Haiying Tang, Ajin Cherian, Rahila Syed, Bharath Rupireddy, Mark Dilger
Tested-by: Haiying Tang
Discussion: https://www.postgresql.org/message-id/CALDaNm0OANxuJ6RXqwZsM1MSY4s19nuH3734j4a72etDwvBETQ@mail.gmail.com
The command is supported for physical slots for now, and returns the
type of slot, its restart_lsn and its restart_tli.
This will be useful for an upcoming patch related to pg_receivewal, to
allow the tool to be able to stream from the position of a slot, rather
than the last WAL position flushed by the backend (as reported by
IDENTIFY_SYSTEM) if the archive directory is found as empty, which would
be an advantage in the case of switching to a different archive
locations with the same slot used to avoid holes in WAL segment
archives.
Author: Ronan Dunklau
Reviewed-by: Kyotaro Horiguchi, Michael Paquier, Bharath Rupireddy
Discussion: https://postgr.es/m/18708360.4lzOvYHigE@aivenronan
CIC and REINDEX CONCURRENTLY assume backends see their catalog changes
no later than each backend's next transaction start. That failed to
hold when a backend absorbed a relevant invalidation in the middle of
running RelationBuildDesc() on the CIC index. Queries that use the
resulting index can silently fail to find rows. Fix this for future
index builds by making RelationBuildDesc() loop until it finishes
without accepting a relevant invalidation. It may be necessary to
reindex to recover from past occurrences; REINDEX CONCURRENTLY suffices.
Back-patch to 9.6 (all supported versions).
Noah Misch and Andrey Borodin, reviewed (in earlier versions) by Andres
Freund.
Discussion: https://postgr.es/m/20210730022548.GA1940096@gust.leadboat.com
For non-MSVC builds this is make's $(CURDIR), while for MSVC builds it
is $topdir/$Config/$module. The directory is added as the second element
in the PATH, so that the install location takes precedence, but the
added PATH element takes precedence over the rest of the PATH.
The reason for this is to allow tests to find built products that are
not installed, such as the libpq_pipeline test driver.
The libpq_pipeline test is adjusted to take advantage of this.
Based on a suggestion from Andres Freund.
Backpatch to release 14.
Discussion: https://postgr.es/m/4941f5a5-2d50-1a0e-6701-14c5fefe92d6@dunslane.net
The build scripts of Visual Studio would fail to detect properly a 3.0.0
build as the check on the second digit was failing. This is adjusted
where needed, allowing the builds to complete. Note that the MSIs of
OpenSSL mentioned in the documentation have not changed any library
names for Win32 and Win64, making this change straight-forward.
Reported-by: htalaco, via github
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/YW5XKYkq6k7OtrFq@paquier.xyz
Backpatch-through: 9.6
Physical replication always ships WAL segment files to replicas once
they are complete. This is a problem if one WAL record is split across
a segment boundary and the primary server crashes before writing down
the segment with the next portion of the WAL record: WAL writing after
crash recovery would happily resume at the point where the broken record
started, overwriting that record ... but any standby or backup may have
already received a copy of that segment, and they are not rewinding.
This causes standbys to stop following the primary after the latter
crashes:
LOG: invalid contrecord length 7262 at A8/D9FFFBC8
because the standby is still trying to read the continuation record
(contrecord) for the original long WAL record, but it is not there and
it will never be. A workaround is to stop the replica, delete the WAL
file, and restart it -- at which point a fresh copy is brought over from
the primary. But that's pretty labor intensive, and I bet many users
would just give up and re-clone the standby instead.
A fix for this problem was already attempted in commit 515e3d84a0, but
it only addressed the case for the scenario of WAL archiving, so
streaming replication would still be a problem (as well as other things
such as taking a filesystem-level backup while the server is down after
having crashed), and it had performance scalability problems too; so it
had to be reverted.
This commit fixes the problem using an approach suggested by Andres
Freund, whereby the initial portion(s) of the split-up WAL record are
kept, and a special type of WAL record is written where the contrecord
was lost, so that WAL replay in the replica knows to skip the broken
parts. With this approach, we can continue to stream/archive segment
files as soon as they are complete, and replay of the broken records
will proceed across the crash point without a hitch.
Because a new type of WAL record is added, users should be careful to
upgrade standbys first, primaries later. Otherwise they risk the standby
being unable to start if the primary happens to write such a record.
A new TAP test that exercises this is added, but the portability of it
is yet to be seen.
This has been wrong since the introduction of physical replication, so
backpatch all the way back. In stable branches, keep the new
XLogReaderState members at the end of the struct, to avoid an ABI
break.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Nathan Bossart <bossartn@amazon.com>
Discussion: https://postgr.es/m/202108232252.dh7uxf6oxwcy@alvherre.pgsql
unicode_east_asian_fw_table.h should not be compiled standalone, similarly
to unicode_combining_table.h, but cpluspluscheck did not get the memo.
Oversight in bab982161.
Per report from Tom Lane
Session statistics, as introduced by 960869da08, had several shortcomings:
- an additional GetCurrentTimestamp() call that also impaired the accuracy of
the data collected
This can be avoided by passing the current timestamp we already have in
pgstat_report_stat().
- an additional statistics UDP packet sent every 500ms
This is solved by adding the new statistics to PgStat_MsgTabstat.
This is conceptually ugly, because session statistics are not
table statistics. But the struct already contains data unrelated
to tables, so there is not much damage done.
Connection and disconnection are reported in separate messages, which
reduces the number of additional messages to two messages per session and a
slight increase in PgStat_MsgTabstat size (but the same number of table
stats fit).
- Session time computation could overflow on systems where long is 32 bit.
Reported-By: Andres Freund <andres@anarazel.de>
Author: Andres Freund <andres@anarazel.de>
Author: Laurenz Albe <laurenz.albe@cybertec.at>
Discussion: https://postgr.es/m/20210801205501.nyxzxoelqoo4x2qc%40alap3.anarazel.de
Backpatch: 14-, where the feature was introduced.
These encapsulate a relation when referred from replication DDL.
Currently they don't do anything useful (they're just wrappers around
RangeVar and Relation respectively) but in the future they'll be used to
carry column lists.
Extracted from a larger patch by Rahila Syed.
Author: Rahila Syed <rahilasyed90@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/CAH2L28vddB_NFdRVpuyRBJEBWjz4BSyTB=_ektNRH8NJ1jf95g@mail.gmail.com
map and grep are not intended to be used as mutators, iterating
with side-effects should be done with for or foreach loops. This
fixes the one occurrence of the pattern, and bumps the perlcritic
policy to severity 5 for the map and grep policies.
Author: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://postgr.es/m/87fsvzhhc4.fsf@wibble.ilmari.org
Move fileset related implementation out of sharedfileset.c to allow its
usage by backends that don't want to share filesets among different
processes. After this split, fileset infrastructure is used by both
sharedfileset.c and worker.c for the named temporary files that survive
across transactions.
Author: Dilip Kumar, based on suggestion by Andres Freund
Reviewed-by: Hou Zhijie, Masahiko Sawada, Amit Kapila
Discussion: https://postgr.es/m/E1mCC6U-0004Ik-Fs@gemulon.postgresql.org
Previously, on the subscriber, we set the error context callback for the
tuple data conversion failures. This commit replaces the existing error
context callback with a comprehensive one so that it shows not only the
details of data conversion failures but also the details of logical change
being applied by the apply worker or table sync worker. The additional
information displayed will be the command, transaction id, and timestamp.
The error context is added to an error only when applying a change but not
while doing other work like receiving data etc.
This will help users in diagnosing the problems that occur during logical
replication. It also can be used for future work that allows skipping a
particular transaction on the subscriber.
Author: Masahiko Sawada
Reviewed-by: Hou Zhijie, Greg Nancarrow, Haiying Tang, Amit Kapila
Tested-by: Haiying Tang
Discussion: https://postgr.es/m/CAD21AoDeScrsHhLyEPYqN3sydg6PxAPVBboK=30xJfUVihNZDA@mail.gmail.com
This is a combined revert of the following commits:
- c3826f8, a refactoring piece that moved the hex decoding code to
src/common/. This code was cleaned up by aef8948, as it originally
included no overflow checks in the same way as the base64 routines in
src/common/ used by SCRAM, making it unsafe for its purpose.
- aef8948, a more advanced refactoring of the hex encoding/decoding code
to src/common/ that added sanity checks on the result buffer for hex
decoding and encoding. As reported by Hans Buschmann, those overflow
checks are expensive, and it is possible to see a performance drop in
the decoding/encoding of bytea or LOs the longer they are. Simple SQLs
working on large bytea values show a clear difference in perf profile.
- ccf4e27, a cleanup made possible by aef8948.
The reverts of all those commits bring back the performance of hex
decoding and encoding back to what it was in ~13. Fow now and
post-beta3, this is the simplest option.
Reported-by: Hans Buschmann
Discussion: https://postgr.es/m/1629039545467.80333@nidsa.net
Backpatch-through: 14
Sets of Unicode keys are picky about the primes used when generating
a perfect hash function for them. Callers can spend many seconds
iterating through all the possible combinations of candidate
multipliers and seeds to find one that works.
Unicode updates typically happen only once a year, but it still makes
development and testing of Unicode scripts unnecessarily slow. To fix,
iterate over the primes in the innermost loop. This does not change
any existing functions checked into the tree.
Here we add additional parsing of Makefiles to determine when to add
references to libpgport and libpgcommon. We also remove the need for
adding the current contrib_extrasource by adding sine very basic logic to
implement the Makefile rules which add .l and .y files when they exist for
a given .o file in the Makefile.
This is just some very basic additional parsing of Makefiles to try to
keep things more consistent between builds using make and MSVC builds.
This happens to work with how our current Makefiles are laid out, but it
could easily be broken in the future if someone chooses do something in
the Makefile that we don't have parsing support for. We will cross that
bridge when we come to it.
Author: David Rowley
Discussion: https://postgr.es/m/CAApHDvoPULi5JW3933NxgwxOmu9Ncvpcyt87UhEHAUX16QqmpA@mail.gmail.com
This adjusts the MSVC build scripts to look at the compile flags mentioned
in the Makefile to look for -D arguments in order to determine which
constants should be defined in Visual Studio builds.
One small anomaly that appeared as a result of this change is that the
Makefile for the ltree contrib module defined LOWER_NODE, but this was
not properly defined in the MSVC build scripts. This meant that MSVC
builds would differ in case sensitivity in the ltree module when
compared to builds using a make build environment. To maintain the same
behavior here we remove the -DLOWER_NODE from the Makefile and just always
define it in ltree.h for non-MSVC builds. We need to maintain the old
behavior here as this affects the on-disk compatibility of GiST indexes
when using the ltree type.
The only other resulting change here is that REFINT_VERBOSE is now defined
for the autoinc, insert_username and moddatetime contrib modules.
Previously on MSVC, this was only defined for the refint module. This
aligns the behavior to build environments using make as all 4 of these
modules share the same Makefile.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/CAApHDvpo6g5csCTjc_0C7DMvgFPomVb0Rh-AcW5afd=Ya=LRuw@mail.gmail.com
In order not to duplicate references and libraries in the Visual Studio
project files produced by the MSVC build scripts, have them check if a
particular reference or library already exists before adding the same one
again.
Reviewed-by: Álvaro Herrera, Andrew Dunstan, Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/CAApHDvpo6g5csCTjc_0C7DMvgFPomVb0Rh-AcW5afd=Ya=LRuw@mail.gmail.com
Previously the 'includes' field was a string. It's slightly nicer to
manage this when it's defined as an array instead. This allows us to
more easily detect and eliminate duplicates.
Reviewed-by: Álvaro Herrera, Andrew Dunstan, Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/CAApHDvpo6g5csCTjc_0C7DMvgFPomVb0Rh-AcW5afd=Ya=LRuw@mail.gmail.com
This appears to have been added way back in ee3b4188a but it's a little
unclear why the change made in that commit is even needed given that
320c7eb8c, dated 18 months earlier, added code to copy fmgroids.h to
src/include/utils.
amcheck seems to get away without adding the additional include directory,
so perhaps dblink can get away with it too.
This builds ok in my VS2017 environment, but the buildfarm may serve as a
reminder about why ee3b4188a was required. There's only one way to find
out for sure.
Discussion: https://postgr.es/m/CAApHDvpo6g5csCTjc_0C7DMvgFPomVb0Rh-AcW5afd=Ya=LRuw@mail.gmail.com
Autoconf's AC_CHECK_DECLS() always defines HAVE_DECL_whatever
as 1 or 0, but some of the entries in msvc/Solution.pm showed
such symbols as "undef" instead of 0. Fix that for consistency.
There's no live bug in current usages AFAICS, but it's not hard
to imagine one creeping in if more-complex #if tests get added.
Back-patch to v13, which is as far back as Solution.pm contains
this data. The inconsistency still exists in the manually-filled
pg_config_ext.h.win32 files of older branches; but as long as the
problem is only latent, it doesn't seem worth the trouble to
clean things up there.
Discussion: https://postgr.es/m/3185430.1626133592@sss.pgh.pa.us
Build farm animals running ancient HPUX and Solaris have a non-standard
sigwait() from draft versions of POSIX, so they didn't like commit
7c09d279. To avoid the problem in general, only try to use sigwait() if
it's declared by <signal.h> and matches the expected declaration. To
select the modern declaration on Solaris (even in non-threaded
programs), move -D_POSIX_PTHREAD_SEMANTICS into the right place to
affect all translation units.
Also fix the error checking. Modern sigwait() doesn't set errno.
Thanks to Tom Lane for help with this.
Discussion: https://postgr.es/m/3187588.1626136248%40sss.pgh.pa.us
To add support for streaming transactions at prepare time into the
built-in logical replication, we need to do the following things:
* Modify the output plugin (pgoutput) to implement the new two-phase API
callbacks, by leveraging the extended replication protocol.
* Modify the replication apply worker, to properly handle two-phase
transactions by replaying them on prepare.
* Add a new SUBSCRIPTION option "two_phase" to allow users to enable
two-phase transactions. We enable the two_phase once the initial data sync
is over.
We however must explicitly disable replication of two-phase transactions
during replication slot creation, even if the plugin supports it. We
don't need to replicate the changes accumulated during this phase,
and moreover, we don't have a replication connection open so we don't know
where to send the data anyway.
The streaming option is not allowed with this new two_phase option. This
can be done as a separate patch.
We don't allow to toggle two_phase option of a subscription because it can
lead to an inconsistent replica. For the same reason, we don't allow to
refresh the publication once the two_phase is enabled for a subscription
unless copy_data option is false.
Author: Peter Smith, Ajin Cherian and Amit Kapila based on previous work by Nikhil Sontakke and Stas Kelvich
Reviewed-by: Amit Kapila, Sawada Masahiko, Vignesh C, Dilip Kumar, Takamichi Osumi, Greg Nancarrow
Tested-By: Haiying Tang
Discussion: https://postgr.es/m/02DA5F5E-CECE-4D9C-8B4B-418077E2C010@postgrespro.ru
Discussion: https://postgr.es/m/CAA4eK1+opiV4aFTmWWUF9h_32=HfPOW9vZASHarT0UA5oBrtGw@mail.gmail.com
Thomas Munro
Tom Lane
Michael Paquier
Andrew Dunstan
Bruce Momjian
Andres Freund
Amit Kapila
Daniel Gustafsson
Peter Eisentraut
Noah Misch
Alvaro Herrera
John Naylor
David Rowley