It was confusing that to other commands, like initdb and postgres, you would
pass the data directory with "-D datadir", but pg_controldata and
pg_resetxlog would take just plain path, without the "-D". With this patch,
pg_controldata and pg_resetxlog also accept "-D datadir".
Abhijit Menon-Sen, with minor kibitzing by me
Address a few typos in the row security update, pointed out
off-list by Adam Brightwell. Also include 'ALL' in the list
of commands supported, for completeness.
Buildfarm member tick identified an issue where the policies in the
relcache for a relation were were being replaced underneath a running
query, leading to segfaults while processing the policies to be added
to a query. Similar to how TupleDesc RuleLocks are handled, add in a
equalRSDesc() function to check if the policies have actually changed
and, if not, swap back the rsdesc field (using the original instead of
the temporairly built one; the whole structure is swapped and then
specific fields swapped back). This now passes a CLOBBER_CACHE_ALWAYS
for me and should resolve the buildfarm error.
In addition to addressing this, add a new chapter in Data Definition
under Privileges which explains row security and provides examples of
its usage, change \d to always list policies (even if row security is
disabled- but note that it is disabled, or enabled with no policies),
rework check_role_for_policy (it really didn't need the entire policy,
but it did need to be using has_privs_of_role()), and change the field
in pg_class to relrowsecurity from relhasrowsecurity, based on
Heikki's suggestion. Also from Heikki, only issue SET ROW_SECURITY in
pg_restore when talking to a 9.5+ server, list Bypass RLS in \du, and
document --enable-row-security options for pg_dump and pg_restore.
Lastly, fix a number of minor whitespace and typo issues from Heikki,
Dimitri, add a missing #include, per Peter E, fix a few minor
variable-assigned-but-not-used and resource leak issues from Coverity
and add tab completion for role attribute bypassrls as well.
This has been broken since commit af7914c662,
which added the EXPLAIN (TIMING) option. Although that commit included
updates to auto_explain, they evidently weren't tested very carefully,
because the code failed to print node timings even when it should, due to
failure to set es.timing in the ExplainState struct. Reported off-list by
Neelakanth Nadgir of Salesforce.
In passing, clean up the documentation for auto_explain's options a
little bit, including re-ordering them into what seems to me a more
logical order.
Building on the updatable security-barrier views work, add the
ability to define policies on tables to limit the set of rows
which are returned from a query and which are allowed to be added
to a table. Expressions defined by the policy for filtering are
added to the security barrier quals of the query, while expressions
defined to check records being added to a table are added to the
with-check options of the query.
New top-level commands are CREATE/ALTER/DROP POLICY and are
controlled by the table owner. Row Security is able to be enabled
and disabled by the owner on a per-table basis using
ALTER TABLE .. ENABLE/DISABLE ROW SECURITY.
Per discussion, ROW SECURITY is disabled on tables by default and
must be enabled for policies on the table to be used. If no
policies exist on a table with ROW SECURITY enabled, a default-deny
policy is used and no records will be visible.
By default, row security is applied at all times except for the
table owner and the superuser. A new GUC, row_security, is added
which can be set to ON, OFF, or FORCE. When set to FORCE, row
security will be applied even for the table owner and superusers.
When set to OFF, row security will be disabled when allowed and an
error will be thrown if the user does not have rights to bypass row
security.
Per discussion, pg_dump sets row_security = OFF by default to ensure
that exports and backups will have all data in the table or will
error if there are insufficient privileges to bypass row security.
A new option has been added to pg_dump, --enable-row-security, to
ask pg_dump to export with row security enabled.
A new role capability, BYPASSRLS, which can only be set by the
superuser, is added to allow other users to be able to bypass row
security using row_security = OFF.
Many thanks to the various individuals who have helped with the
design, particularly Robert Haas for his feedback.
Authors include Craig Ringer, KaiGai Kohei, Adam Brightwell, Dean
Rasheed, with additional changes and rework by me.
Reviewers have included all of the above, Greg Smith,
Jeff McCormick, and Robert Haas.
The new --stats/--stats=record options to pg_xlogdump display per
rmgr/per record statistics about the parsed WAL. This is useful to
understand what the WAL primarily consists of, to allow targeted
optimizations on application, configuration, and core code level.
It is likely that we will want to fine tune the statistics further,
but the feature already is quite helpful.
Author: Abhijit Menon-Sen, slightly editorialized by me
Reviewed-By: Andres Freund, Dilip Kumar and Furuya Osamu
Discussion: 20140604104716.GA3989@toroid.org
They were marked to return a boolean, but they actually return a
GinTernaryValue, which is more like a "char". It makes no practical
difference, as the triConsistent functions cannot be called directly from
SQL because they have "internal" arguments, but this nevertheless seems
more correct.
Also fix the GinTernaryValue name in the documentation. I renamed the enum
earlier, but neglected the docs.
Alexander Korotkov. This is new in 9.4, so backpatch there.
This new GUC context option allows GUC parameters to have the combined
properties of PGC_BACKEND and PGC_SUSET, ie, they don't change after
session start and non-superusers can't change them. This is a more
appropriate choice for log_connections and log_disconnections than their
previous context of PGC_BACKEND, because we don't want non-superusers
to be able to affect whether their sessions get logged.
Note: the behavior for log_connections is still a bit odd, in that when
a superuser attempts to set it from PGOPTIONS, the setting takes effect
but it's too late to enable or suppress connection startup logging.
It's debatable whether that's worth fixing, and in any case there is
a reasonable argument for PGC_SU_BACKEND to exist.
In passing, re-pgindent the files touched by this commit.
Fujii Masao, reviewed by Joe Conway and Amit Kapila
Instead of just erroring out when a tool is missing, wrap the call with
the "missing" script that we are already using for bison, flex, and
perl, so that the users get a useful error message.
Previously replication commands like IDENTIFY_COMMAND were not logged
even when log_statements is set to all. Some users who want to audit
all types of statements were not satisfied with this situation. To
address the problem, this commit adds new GUC log_replication_commands.
If it's enabled, all replication commands are logged in the server log.
There are many ways to allow us to enable that logging. For example,
we can extend log_statement so that replication commands are logged
when it's set to all. But per discussion in the community, we reached
the consensus to add separate GUC for that.
Reviewed by Ian Barwick, Robert Haas and Heikki Linnakangas.
With the unicode linestyle, this adds support to control if the
column, header, or border style should be single or double line
unicode characters. The default remains 'single'.
In passing, clean up the border documentation and address some
minor formatting/spelling issues.
Pavel Stehule, with some additional changes by me.
Provide an option to skip NULL values in a row when generating a JSON
object from that row with row_to_json. This can reduce the size of the
JSON object in cases where columns are NULL without really reducing the
information in the JSON object.
This also makes row_to_json into a single function with default values,
rather than having multiple functions. In passing, change array_to_json
to also be a single function with default values (we don't add an
'ignore_nulls' option yet- it's not clear that there is a sensible
use-case there, and it hasn't been asked for in any case).
Pavel Stehule
The reported latency values now include the "schedule lag" time, that is,
the time between the transaction's scheduled start time and the time it
actually started. This relates better to a model where requests arrive at a
certain rate, and we are interested in the response time to the end user or
application, rather than the response time of the database itself.
Also, when --rate is used, include the schedule lag time in the log output.
The --rate option is new in 9.4, so backpatch to 9.4. It seems better to
make this change in 9.4, while we're still in the beta period, than ship a
9.4 version that calculates the values differently than 9.5.
Add --help=<topic> for the commandline, and \? <topic> as a backslash
command, to show more help than the invocations without parameters
do. "commands", "variables" and "options" currently exist as help
topics describing, respectively, backslash commands, psql variables,
and commandline switches. Without parameters the help commands show
their previous topic.
Some further wordsmithing or extending of the added help content might
be needed; but there seems little benefit delaying the overall feature
further.
Author: Pavel Stehule, editorialized by many
Reviewed-By: Andres Freund, Petr Jelinek, Fujii Masao, MauMau, Abhijit
Menon-Sen and Erik Rijkers.
Discussion: CAFj8pRDVGuC-nXBfe2CK8vpyzd2Dsr9GVpbrATAnZO=2YQ0s2Q@mail.gmail.com,
CAFj8pRA54AbTv2RXDTRxiAd8hy8wxmoVLqhJDRCwEnhdd7OUkw@mail.gmail.com
This provides a convenient method of classifying input values into buckets
that are not necessarily equal-width. It works on any sortable data type.
The choice of function name is a bit debatable, perhaps, but showing that
there's a relationship to the SQL standard's width_bucket() function seems
more attractive than the other proposals.
Petr Jelinek, reviewed by Pavel Stehule
psql's \s (print command history) doesn't work at all with recent libedit
versions when printing to the terminal, because libedit tries to do an
fchmod() on the target file which will fail if the target is /dev/tty.
(We'd already noted this in the context of the target being /dev/null.)
Even before that, it didn't work pleasantly, because libedit likes to
encode the command history file (to ensure successful reloading), which
renders it nigh unreadable, not to mention significantly different-looking
depending on exactly which libedit version you have. So let's forget using
write_history() for this purpose, and instead print the data ourselves,
using logic similar to that used to iterate over the history for newline
encoding/decoding purposes.
While we're at it, insert the ability to use the pager when \s is printing
to the terminal. This has been an acknowledged shortcoming of \s for many
years, so while you could argue it's not exactly a back-patchable bug fix
it still seems like a good improvement. Anyone who's seriously annoyed
at this can use "\s /dev/tty" or local equivalent to get the old behavior.
Experimentation with this showed that the history iteration logic was
actually rather broken when used with libedit. It turns out that with
libedit you have to use previous_history() not next_history() to advance
to more recent history entries. The easiest and most robust fix for this
seems to be to make a run-time test to verify which function to call.
We had not noticed this because libedit doesn't really need the newline
encoding logic: its own encoding ensures that command entries containing
newlines are reloaded correctly (unlike libreadline). So the effective
behavior with recent libedits was that only the oldest history entry got
newline-encoded or newline-decoded. However, because of yet other bugs in
history_set_pos(), some old versions of libedit allowed the existing loop
logic to reach entries besides the oldest, which means there may be libedit
~/.psql_history files out there containing encoded newlines in more than
just the oldest entry. To ensure we can reload such files, it seems
appropriate to back-patch this fix, even though that will result in some
incompatibility with older psql versions (ie, multiline history entries
written by a psql with this fix will look corrupted to a psql without it,
if its libedit is reasonably up to date).
Stepan Rutz and Tom Lane
The old claim is from my commit d06ebdb8d3 of
2000-07-17, but it seems to have been a plain old thinko; sum(float4) has
been distinct from sum(float8) since Berkeley days. Noted by KaiGai Kohei.
While at it, mention the existence of sum(money), which is also of
embarrassingly ancient vintage.
The link to the NIST web page about DES standards leads to nowhere, and
according to archive.org has been forwarded to an unrelated page for
many years. Therefore, just remove that link. More up to date
information can be found via Wikipedia, for example.
The number of % parameter markers in RAISE statement should match the number
of parameters given. We used to check that at execution time, but we have
all the information needed at compile time, so let's check it at compile
time instead. It's generally better to find mistakes earlier.
Marko Tiikkaja, reviewed by Fabien Coelho
The new %l substitution shows the line number inside a (potentially
multi-line) statement starting from one.
Author: Sawada Masahiko, heavily editorialized by me.
Reviewed-By: Jeevan Chalke, Alvaro Herrera
This patch allows us to execute ALTER SYSTEM RESET command to
remove the configuration entry from postgresql.auto.conf.
Vik Fearing, reviewed by Amit Kapila and me.
Errors detected using Topy (https://github.com/intgr/topy), all
changes verified by hand and some manual tweaks added.
Marti Raudsepp
Individual changes backpatched, where applicable, as far as 9.0.
This is useful to allow to set GUCs to values that include spaces;
something that wasn't previously possible. The primary case motivating
this is the desire to set default_transaction_isolation to 'repeatable
read' on a per connection basis, but other usecases like seach_path do
also exist.
This introduces a slight backward incompatibility: Previously a \ in
an option value would have been passed on literally, now it'll be
taken as an escape.
The relevant mailing list discussion starts with
20140204125823.GJ12016@awork2.anarazel.de.
This enables changing permanent (logged) tables to unlogged and
vice-versa.
(Docs for ALTER TABLE / SET TABLESPACE got shuffled in an order that
hopefully makes more sense than the original.)
Author: Fabrízio de Royes Mello
Reviewed by: Christoph Berg, Andres Freund, Thom Brown
Some tweaking by Álvaro Herrera
Cause the path extraction operators to return their lefthand input,
not NULL, if the path array has no elements. This seems more consistent
since the case ought to correspond to applying the simple extraction
operator (->) zero times.
Cause other corner cases in field/element/path extraction to return NULL
rather than failing. This behavior is arguably more useful than throwing
an error, since it allows an expression index using these operators to be
built even when not all values in the column are suitable for the
extraction being indexed. Moreover, we already had multiple
inconsistencies between the path extraction operators and the simple
extraction operators, as well as inconsistencies between the JSON and
JSONB code paths. Adopt a uniform rule of returning NULL rather than
throwing an error when the JSON input does not have a structure that
permits the request to be satisfied.
Back-patch to 9.4. Update the release notes to list this as a behavior
change since 9.3.
As 'ALTER TABLESPACE .. MOVE ALL' really didn't change the tablespace
but instead changed objects inside tablespaces, it made sense to
rework the syntax and supporting functions to operate under the
'ALTER (TABLE|INDEX|MATERIALIZED VIEW)' syntax and to be in
tablecmds.c.
Pointed out by Alvaro, who also suggested the new syntax.
Back-patch to 9.4.
The new column shows how many backends have a buffer pinned. That can
be useful during development or to diagnose production issues
e.g. caused by vacuum waiting for cleanup locks.
To handle upgrades transparently - the extension might be used in
views - deal with callers expecting the old number of columns.
Reviewed by Fujii Masao and Rajeev rastogi.
While the space is optional, it seems nicer to be consistent with what
you get if you do "SET search_path=...". SET always normalizes the
separator to be comma+space.
Christoph Martin
The aboriginal sample placed connection parameters in
groupOfUniqueNames/uniqueMember. OpenLDAP, at least as early as version
2.4.23, rejects uniqueMember entries that do not conform to the syntax
for a distinguished name. Use device/description, which is free-form.
Back-patch to 9.4 for web site visibility.
Oversight in commit 7cbe57c34d.
Back-patch to 9.4, where that commit first appeared. In passing,
release-note the FDW API postcondition change from the same commit.
The old text explained what happened if we didn't have working int64
arithmetic. Since that case has been explicitly rejected by configure
since 8.4.3, documenting it in the 9.x branches can only produce confusion.