When estimating the number of groups using extended statistics, the code
was discarding information about system attributes. This led to strange
situation that
SELECT 1 FROM t GROUP BY ctid;
could have produced higher estimate (equal to pg_class.reltuples) than
SELECT 1 FROM t GROUP BY a, b, ctid;
with extended statistics on (a,b). Fixed by retaining information about
the system attribute.
Backpatch all the way to 10, where extended statistics were introduced.
Author: Tomas Vondra
Backpatch-through: 10
I introduced this duplicate code in commit 8b08f7d482 for no good
reason. Remove it, and backpatch to 11 where it was introduced.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Previously the WAL replay of COMMIT_TS_SETTS record called
TransactionTreeSetCommitTsData() with the argument write_xlog=true,
which generated and wrote new COMMIT_TS_SETTS record.
This should not be acceptable because it's during recovery.
This commit fixes the WAL replay of COMMIT_TS_SETTS record
so that it calls TransactionTreeSetCommitTsData() with write_xlog=false
and doesn't generate new WAL during recovery.
Back-patch to all supported branches.
Reported-by: lx zou <zoulx1982@163.com>
Author: Fujii Masao
Reviewed-by: Alvaro Herrera
Discussion: https://postgr.es/m/16931-620d0f2fdc6108f1@postgresql.org
Jasen Betts reported yet another unintended side effect of commit
85c54287a: reconnecting with "\c service=whatever" did not have the
expected results. The reason is that starting from the output of
PQconndefaults() effectively allows environment variables (such
as PGPORT) to override entries in the service file, whereas the
normal priority is the other way around.
Not using PQconndefaults at all would require yet a third main code
path in do_connect's parameter setup, so I don't really want to fix
it that way. But we can have the logic effectively ignore all the
default values for just a couple more lines of code.
This patch doesn't change the behavior for "\c -reuse-previous=on
service=whatever". That remains significantly different from before
85c54287a, because many more parameters will be re-used, and thus
not be possible for service entries to replace. But I think this
is (mostly?) intentional. In any case, since libpq does not report
where it got parameter values from, it's hard to do differently.
Per bug #16936 from Jasen Betts. As with the previous patches,
back-patch to all supported branches. (9.5 is unfortunately now
out of support, so this won't get fixed there.)
Discussion: https://postgr.es/m/16936-3f524322a53a29f0@postgresql.org
A couple error messages and comments used 'statistic kind', not the
correct 'statistics kind'. Fix and backpatch all the way back to 10,
where extended statistics were introduced.
Backpatch-through: 10
pg_waldump --stats=record identifies a record by a combination
of the RmgrId and the four bits of the xl_info field of the record.
But XACT records use the first bit of those four bits for an optional
flag variable, and the following three bits for the opcode to
identify a record. So previously the same type of XACT record
could have different four bits (three bits are the same but the
first one bit is different), and which could cause
pg_waldump --stats=record to show two lines of per-record statistics
for the same XACT record. This is a bug.
This commit changes pg_waldump --stats=record so that it processes
only XACT record differently, i.e., filters the opcode out of xl_info
and uses a combination of the RmgrId and those three bits as
the identifier of a record, only for XACT record. For other records,
the four bits of the xl_info field are still used.
Back-patch to all supported branches.
Author: Kyotaro Horiguchi
Reviewed-by: Shinya Kato, Fujii Masao
Discussion: https://postgr.es/m/2020100913412132258847@highgo.ca
The test added by 595b9cb forgot that on Windows it is necessary to set
up pg_hba.conf (see PostgresNode::set_replication_conf) with a specific
entry or base backups fail. Any node that requires to support
replication just needs to pass down allows_streaming at initialization.
This updates the test to do so. Simplify things a bit while on it.
Per buildfarm member fairywren. Any Windows hosts running this test
would have failed, and I have reproduced the problem as well.
Backpatch-through: 10
Any transactions found as still prepared by a checkpoint have their
state data read from the WAL records generated by PREPARE TRANSACTION
before being moved into their new location within pg_twophase/. While
reading such records, the WAL reader uses the callback
read_local_xlog_page() to read a page, that is shared across various
parts of the system. This callback, since 1148e22a, has introduced an
update of ThisTimeLineID when reading a record while in recovery, which
is potentially helpful in the context of cascading WAL senders.
This update of ThisTimeLineID interacts badly with the checkpointer if a
promotion happens while some 2PC data is read from its record, as, by
changing ThisTimeLineID, any follow-up WAL records would be written to
an timeline older than the promoted one. This results in consistency
issues. For instance, a subsequent server restart would cause a failure
in finding a valid checkpoint record, resulting in a PANIC, for
instance.
This commit changes the code reading the 2PC data to reset the timeline
once the 2PC record has been read, to prevent messing up with the static
state of the checkpointer. It would be tempting to do the same thing
directly in read_local_xlog_page(). However, based on the discussion
that has led to 1148e22a, users may rely on the updates of
ThisTimeLineID when a WAL record page is read in recovery, so changing
this callback could break some cases that are working currently.
A TAP test reproducing the issue is added, relying on a PITR to
precisely trigger a promotion with a prepared transaction still
tracked.
Per discussion with Heikki Linnakangas, Kyotaro Horiguchi, Fujii Masao
and myself.
Author: Soumyadeep Chakraborty, Jimmy Yih, Kevin Yeap
Discussion: https://postgr.es/m/CAE-ML+_EjH_fzfq1F3RJ1=XaaNG=-Jz-i3JqkNhXiLAsM3z-Ew@mail.gmail.com
Backpatch-through: 10
While back-patching e0e569e1d, I noted that there were some other
places where we ought to be applying DH_free(); namely, where we
load some DH parameters from a file and then reject them as not
being sufficiently secure. While it seems really unlikely that
anybody would hit these code paths in production, let alone do
so repeatedly, let's fix it for consistency.
Back-patch to v10 where this code was introduced.
Discussion: https://postgr.es/m/16160-18367e56e9a28264@postgresql.org
When loading DH parameters used for the generation of ephemeral DH keys
in the backend, the code has never bothered releasing the memory used
for the DH information loaded from a file or from libpq's default. This
commit makes sure that the information is properly free()'d.
Back-patch of e0e569e1d. We originally thought the leak was minor and
not worth back-patching, but Jelte Fennema pointed out that repeated
SIGHUP's can result in very serious bloat of the postmaster, which is
then multiplied by being duplicated into eadh forked child.
Back-patch to v10; the code looked different before c0a15e07c,
and didn't have a leak in the actually-live code paths.
Michael Paquier
Discussion: https://postgr.es/m/16160-18367e56e9a28264@postgresql.org
We leaked the error report from PQconninfoParse, when there was
one. It seems unlikely that real usage patterns would repeat
the failure often enough to create serious bloat, but let's
back-patch anyway to keep the code similar in all branches.
Found via valgrind testing.
Back-patch to v10 where this code was added.
Discussion: https://postgr.es/m/3816764.1616104288@sss.pgh.pa.us
Because guc.c prefers to keep all its string values in malloc'd
not palloc'd storage, it has to be more careful than usual to
avoid leaks. Error exits out of string GUC hook checks failed
to clear the proposed value string, and error exits out of
ProcessGUCArray() failed to clear the malloc'd results of
ParseLongOption().
Found via valgrind testing.
This problem is ancient, so back-patch to all supported branches.
Discussion: https://postgr.es/m/3816764.1616104288@sss.pgh.pa.us
The text search cache mechanisms assume that we can clean up
an invalidated dictionary cache entry simply by resetting the
associated long-lived memory context. However, that does not work
for ispell affixes that make use of regular expressions, because
the regex library deals in plain old malloc. Hence, we leaked
compiled regex(es) any time we dropped such a cache entry. That
could quickly add up, since even a fairly trivial regex can use up
tens of kB, and a large one can eat megabytes. Add a memory context
callback to ensure that a regex gets freed when its owning cache
entry is cleared.
Found via valgrind testing.
This problem is ancient, so back-patch to all supported branches.
Discussion: https://postgr.es/m/3816764.1616104288@sss.pgh.pa.us
Although these lists are usually NIL, and even when not empty
are unlikely to be large, constant relcache update traffic could
eventually result in visible bloat of CacheMemoryContext.
Found via valgrind testing.
Back-patch to v10 where this field was added.
Discussion: https://postgr.es/m/3816764.1616104288@sss.pgh.pa.us
pg_read_file() is the function that's in core, pg_file_read() is in
adminpack. But when using pg_file_read() in adminpack it calls the *C*
level function pg_read_file() in core, which probably threw the original
author off. But the error hint should be about the SQL function.
Reported-By: Sergei Kornilov
Backpatch-through: 11
Discussion: https://postgr.es/m/373021616060475@mail.yandex.ru
Robert Foggia of Trustwave reported that read_tablespace_map()
fails to prevent an overrun of its on-stack input buffer.
Since the tablespace map file is presumed trustworthy, this does
not seem like an interesting security vulnerability, but still
we should fix it just in the name of robustness.
While here, document that pg_basebackup's --tablespace-mapping option
doesn't work with tar-format output, because it doesn't. To make it
work, we'd have to modify the tablespace_map file within the tarball
sent by the server, which might be possible but I'm not volunteering.
(Less-painful solutions would require changing the basebackup protocol
so that the source server could adjust the map. That's not very
appetizing either.)
With very unlucky timing and parallel_leader_participation off, PHJ
could attempt to access per-batch state just as it was being freed.
There was code intended to prevent that by checking for a cleared
pointer, but it was buggy.
Fix, by introducing an extra barrier phase. The new phase
PHJ_BUILD_RUNNING means that it's safe to access the per-batch state to
find a batch to help with, and PHJ_BUILD_DONE means that it is too late.
The last to detach will free the array of per-batch state as before, but
now it will also atomically advance the phase at the same time, so that
late attachers can avoid the hazard, without the data race. This
mirrors the way per-batch hash tables are freed (see phases
PHJ_BATCH_PROBING and PHJ_BATCH_DONE).
Revealed by a one-off build farm failure, where BarrierAttach() failed a
sanity check assertion, because the memory had been clobbered by
dsa_free().
Back-patch to 11, where the code arrived.
Reported-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/20200929061142.GA29096%40paquier.xyz
After reading the root cert list from the ssl_ca_file, immediately
install it as client CA list of the new SSL context. That gives the
SSL context ownership of the list, so that SSL_CTX_free will free it.
This avoids a permanent memory leak if we fail further down in
be_tls_init(), which could happen if bogus CRL data is offered.
The leak could only amount to something if the CRL parameters get
broken after server start (else we'd just quit) and then the server
is SIGHUP'd many times without fixing the CRL data. That's rather
unlikely perhaps, but it seems worth fixing, if only because the
code is clearer this way.
While we're here, add some comments about the memory management
aspects of this logic.
Noted by Jelte Fennema and independently by Andres Freund.
Back-patch to v10; before commit de41869b6 it doesn't matter,
since we'd not re-execute this code during SIGHUP.
Discussion: https://postgr.es/m/16160-18367e56e9a28264@postgresql.org
psql's editing commands decide whether the user has edited the file
by checking for change of modification timestamp. This is probably
fine for a pre-existing file, but with a temporary file that is
created within the command, it's possible for a fast typist to
save-and-exit in less than the one-second granularity of stat(2)
timestamps. On Windows FAT filesystems the granularity is even
worse, 2 seconds, making the race a bit easier to hit.
To fix, try to set the temp file's mod time to be two seconds ago.
It's unlikely this would fail, but then again the race condition
itself is unlikely, so just ignore any error.
Also, we might as well check the file size as well as its mod time.
While this is a difficult bug to hit, it still seems worth
back-patching, to ensure that users' edits aren't lost.
Laurenz Albe, per gripe from Jacob Champion; based on fix suggestions
from Jacob and myself
Discussion: https://postgr.es/m/0ba3f2a658bac6546d9934ab6ba63a805d46a49b.camel@cybertec.at
GENERATED ALWAYS AS IDENTITY implies NOT NULL, but the code failed
to complain if you overrode that with "GENERATED ALWAYS AS IDENTITY
NULL". One might think the old behavior was a feature, but it was
inconsistent because the outcome varied depending on the order of
the clauses, so it seems to have been just an oversight.
Per bug #16913 from Pavel Boev. Back-patch to v10 where identity
columns were introduced.
Vik Fearing (minor tweaks by me)
Discussion: https://postgr.es/m/16913-3b5198410f67d8c6@postgresql.org
Revert two recent commits that had btree_index.sql drop regression test
indexes rather than leave them behind for pg_dump testing.
This is intended to restore pg_upgrade coverage of indexes with the
vacuum_cleanup_index_scale_factor storage parameter set on buildfarm
member crake.
Backpatch: 11-12 only
Commit 92785dac2 copied some logic related to advancement of inStart
from pqParseInput3 into getRowDescriptions and getAnotherTuple,
because it wanted to allow user-defined row processor callbacks to
potentially longjmp out of the library, and inStart would have to be
updated before that happened to avoid an infinite loop. We later
decided that that API was impossibly fragile and reverted it, but
we didn't undo all of the related code changes, and this bit of
messiness survived. Undo it now so that there's just one place in
pqParseInput3's processing where inStart is advanced; this will
simplify addition of better tracing support.
getParamDescriptions had grown similar processing somewhere along
the way (not in 92785dac2; I didn't track down just when), but it's
actually buggy because its handling of corrupt-message cases seems to
have been copied from the v2 logic where we lacked a known message
length. The cases where we "goto not_enough_data" should not simply
return EOF, because then we won't consume the message, potentially
creating an infinite loop. That situation now represents a
definitively corrupt message, and we should report it as such.
Although no field reports of getParamDescriptions getting stuck in
a loop have been seen, it seems appropriate to back-patch that fix.
I chose to back-patch all of this to keep the logic looking more alike
in supported branches.
Discussion: https://postgr.es/m/2217283.1615411989@sss.pgh.pa.us
The vacuum_cleanup_index_scale_factor storage parameter was set in a
btree index that was previously left behind in the regression test
database. As a result, the index gets tested within pg_dump and
pg_restore tests, as well as pg_upgrade testing. This won't work when
upgrading to Postgres 14, though, because the storage parameter was
removed on that version by commit 9f3665fb.
Fix the test failure by dropping the index in question.
Per buildfarm member crake.
Discussion: https://postgr.es/m/CAH2-WzmeXYBWdhF7BMhNjhq9exsk=E1ohqBFAwzPdXJZ1XDMUA@mail.gmail.com
Backpatch: 11-12 only
Clarify the discussion in "User-Defined Procedures", by laying out
the key differences between functions and procedures in a bulleted
list. Notably, this avoids burying the lede about procedures being
able to do transaction control. Make the back-link in the CREATE
FUNCTION reference page more prominent, and add one in CREATE
PROCEDURE.
Per gripe from Guyren Howe. Thanks to David Johnston for discussion.
Discussion: https://postgr.es/m/BYAPR03MB4903C53A8BB7EFF5EA289674A6949@BYAPR03MB4903.namprd03.prod.outlook.com
"SELECT pg_import_system_collations(0)" caused an assertion failure.
With a random nonzero argument --- or indeed with zero, in non-assert
builds --- it would happily make pg_collation entries with garbage
values of collnamespace. These are harmless as far as I can tell
(unless maybe the OID happens to become used for a schema, later on?).
In any case this isn't a security issue, since the function is
superuser-only. But it seems like a gotcha for unwary DBAs, so let's
add a check that the given OID belongs to some schema.
Back-patch to v10 where this function was introduced.
On Windows, CMD.EXE allegedly does not run a command that uses forward slashes,
so let's convert the path to use backslashes instead.
Backpatch to 10.
Author: Nitin Jadhav <nitinjadhavpostgres@gmail.com>
Reviewed-by: Juan José Santamaría Flecha <juanjo.santamaria@gmail.com>
Discussion: https://postgr.es/m/CAMm1aWaNDuaPYFYMAqDeJrZmPtNvLcJRS++CcZWY8LT6KcoBZw@mail.gmail.com
AfterTriggerSaveEvent() wrongly allocates the slot in execution-span
memory context, whereas the correct thing is to allocate it in
a transaction-span context, because that's where the enclosing
AfterTriggersTableData instance belongs into.
Backpatch to 12 (the test back to 11, where it works well with no code
changes, and it's good to have to confirm that the case was previously
well supported); this bug seems introduced by commit ff11e7f4b9.
Reported-by: Bertrand Drouvot <bdrouvot@amazon.com>
Author: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/39a71864-b120-5a5c-8cc5-c632b6f16761@amazon.com
Break the synopsis into named parts to make it less confusing.
Make more than zero effort at applying SGML markup. Do a bit
of copy-editing of nearby text.
The synopsis revision is by Alvaro Herrera and Paul Förster,
the rest is my fault. Back-patch to v10 where multi-host
connection strings appeared.
Discussion: https://postgr.es/m/6E752D6B-487C-463E-B6E2-C32E7FB007EA@gmail.com
Commit 866e24d47d added an assert that HEAP_XMAX_LOCK_ONLY and
HEAP_KEYS_UPDATED cannot appear together, on the faulty assumption that
the latter necessarily referred to an update and not a tuple lock; but
that's wrong, because SELECT FOR UPDATE can use precisely that
combination, as evidenced by the amcheck test case added here.
Remove the Assert(), and also patch amcheck's verify_heapam.c to not
complain if the combination is found. Also, out of overabundance of
caution, update (across all branches) README.tuplock to be more explicit
about this.
Author: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Mahendra Singh Thalor <mahi6run@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Discussion: https://postgr.es/m/20210124061758.GA11756@nol
While poking at the regex code, I happened to notice that the bug
squashed in commit afcc8772e had a sibling: next() failed to return
a specific value associated with the '}' token for a "\{m,n\}"
quantifier when parsing in basic RE mode. Again, this could result
in treating the quantifier as non-greedy, which it never should be in
basic mode. For that to happen, the last character before "\}" that
sets "nextvalue" would have to set it to zero, or it'd have to have
accidentally been zero from the start. The failure can be provoked
repeatably with, for example, a bound ending in digit "0".
Like the previous patch, back-patch all the way.
If ExecGetInsertedCols(), ExecGetUpdatedCols() or ExecGetExtraUpdatedCols()
were called with a ResultRelInfo that's not in the range table and isn't a
partition routing target, the functions would dereference a NULL pointer,
relinfo->ri_RootResultRelInfo. Such ResultRelInfos are created when firing
RI triggers in tables that are not modified directly. None of the current
callers of these functions pass such relations, so this isn't a live bug,
but let's make them more robust.
Also update comment in ResultRelInfo; after commit 6214e2b228,
ri_RangeTableIndex is zero for ResultRelInfos created for partition tuple
routing.
Noted by Coverity. Backpatch down to v11, like commit 6214e2b228.
Reviewed-by: Tom Lane, Amit Langote
FreeBSD 13 gained O_DSYNC, which would normally cause wal_sync_method to
choose open_datasync as its default value. That may not be a good
choice for all systems, and performs worse than fdatasync in some
scenarios. Let's preserve the existing default behavior for now.
Like commit 576477e73c, which did the same for Linux, back-patch to all
supported releases.
Discussion: https://postgr.es/m/CA%2BhUKGLsAMXBQrCxCXoW-JsUYmdOL8ALYvaX%3DCrHqWxm-nWbGA%40mail.gmail.com
While cleaning up after a parallel query or parallel index creation that
created temporary files, we could be interrupted by a statement timeout.
The error handling path would then fail to clean up the files when it
ran dsm_detach() again, because the callback was already popped off the
list. Prevent this hazard by holding interrupts while the cleanup code
runs.
Thanks to Heikki Linnakangas for this suggestion, and also to Kyotaro
Horiguchi, Masahiko Sawada, Justin Pryzby and Tom Lane for discussion of
this and earlier ideas on how to fix the problem.
Back-patch to all supported releases.
Reported-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20191212180506.GR2082@telsasoft.com
Modern gcc and clang compilers offer alignment sanitizers, which help to detect
pointer misalignment. However, our codebase already contains x86-specific
crc32 computation code, which uses unalignment access. Thankfully, those
compilers also support the attribute, which disables alignment sanitizers at
the function level. This commit adds pg_attribute_no_sanitize_alignment(),
which wraps this attribute, and applies it to pg_comp_crc32c_sse42() function.
Back-patch of commits 993bdb9f9 and ad2ad698a, to enable doing
alignment testing in all supported branches.
Discussion: https://postgr.es/m/CAPpHfdsne3%3DT%3DfMNU45PtxdhSL_J2PjLTeS8rwKnJzUR4YNd4w%40mail.gmail.com
Discussion: https://postgr.es/m/475514.1612745257%40sss.pgh.pa.us
Author: Alexander Korotkov, revised by Tom Lane
Reviewed-by: Tom Lane
Given a regex pattern with a very long fixed prefix (approaching 500
characters), the result of pow(FIXED_CHAR_SEL, fixed_prefix_len) can
underflow to zero. Typically the preceding selectivity calculation
would have underflowed as well, so that we compute 0/0 and get NaN.
In released branches this leads to an assertion failure later on.
That doesn't happen in HEAD, for reasons I've not explored yet,
but it's surely still a bug.
To fix, just skip the division when the pow() result is zero, so
that we'll (most likely) return a zero selectivity estimate. In
the edge cases where "sel" didn't yet underflow, perhaps this
isn't desirable, but I'm not sure that the case is worth spending
a lot of effort on. The results of regex_selectivity_sub() are
barely worth the electrons they're written on anyway :-(
Per report from Alexander Lakhin. Back-patch to all supported versions.
Discussion: https://postgr.es/m/6de0a0c3-ada9-cd0c-3e4e-2fa9964b41e3@gmail.com
If a cross-partition UPDATE violates a constraint on the target partition,
and the columns in the new partition are in different physical order than
in the parent, the error message can reveal columns that the user does not
have SELECT permission on. A similar bug was fixed earlier in commit
804b6b6db4.
The cause of the bug is that the callers of the
ExecBuildSlotValueDescription() function got confused when constructing
the list of modified columns. If the tuple was routed from a parent, we
converted the tuple to the parent's format, but the list of modified
columns was grabbed directly from the child's RTE entry.
ExecUpdateLockMode() had a similar issue. That lead to confusion on which
columns are key columns, leading to wrong tuple lock being taken on tables
referenced by foreign keys, when a row is updated with INSERT ON CONFLICT
UPDATE. A new isolation test is added for that corner case.
With this patch, the ri_RangeTableIndex field is no longer set for
partitions that don't have an entry in the range table. Previously, it was
set to the RTE entry of the parent relation, but that was confusing.
NOTE: This modifies the ResultRelInfo struct, replacing the
ri_PartitionRoot field with ri_RootResultRelInfo. That's a bit risky to
backpatch, because it breaks any extensions accessing the field. The
change that ri_RangeTableIndex is not set for partitions could potentially
break extensions, too. The ResultRelInfos are visible to FDWs at least,
and this patch required small changes to postgres_fdw. Nevertheless, this
seem like the least bad option. I don't think these fields widely used in
extensions; I don't think there are FDWs out there that uses the FDW
"direct update" API, other than postgres_fdw. If there is, you will get a
compilation error, so hopefully it is caught quickly.
Backpatch to 11, where support for both cross-partition UPDATEs, and unique
indexes on partitioned tables, were added.
Reviewed-by: Amit Langote
Security: CVE-2021-3393
rewriteRuleAction() neglected this step, although it was careful to
propagate other similar flags such as hasSubLinks or hasRowSecurity.
Omitting to transfer hasRecursive is just cosmetic at the moment,
but omitting hasModifyingCTE is a live bug, since the executor
certainly looks at that.
The proposed test case only fails back to v10, but since the executor
examines hasModifyingCTE in 9.x as well, I suspect that a test case
could be devised that fails in older branches. Given the nearness
of the release deadline, though, I'm not going to spend time looking
for a better test.
Report and patch by Greg Nancarrow, cosmetic changes by me
Discussion: https://postgr.es/m/CAJcOf-fAdj=nDKMsRhQzndm-O13NY4dL6xGcEvdX5Xvbbi0V7g@mail.gmail.com
Generally, members of inheritance trees must be plain tables (or,
in more recent versions, foreign tables). ALTER TABLE INHERIT
rejects creating an inheritance relationship that has a view at
either end. When DefineQueryRewrite attempts to convert a relation
to a view, it already had checks prohibiting doing so for partitioning
parents or children as well as traditional-inheritance parents ...
but it neglected to check that a traditional-inheritance child wasn't
being converted. Since the planner assumes that any inheritance
child is a table, this led to making plans that tried to do a physical
scan on a view, causing failures (or even crashes, in recent versions).
One could imagine trying to support such a case by expanding the view
normally, but since the rewriter runs before the planner does
inheritance expansion, it would take some very fundamental refactoring
to make that possible. There are probably a lot of other parts of the
system that don't cope well with such a situation, too. For now,
just forbid it.
Per bug #16856 from Yang Lin. Back-patch to all supported branches.
(In versions before v10, this includes back-patching the portion of
commit 501ed02cf that added has_superclass(). Perhaps the lack of
that infrastructure partially explains the missing check.)
Discussion: https://postgr.es/m/16856-0363e05c6e1612fd@postgresql.org
If a multi-byte character is escaped with a backslash in TEXT mode input,
and the encoding is one of the client-only encodings where the bytes after
the first one can have an ASCII byte "embedded" in the char, we didn't
skip the character correctly. After a backslash, we only skipped the first
byte of the next character, so if it was a multi-byte character, we would
try to process its second byte as if it was a separate character. If it
was one of the characters with special meaning, like '\n', '\r', or
another '\\', that would cause trouble.
One such exmple is the byte sequence '\x5ca45c2e666f6f' in Big5 encoding.
That's supposed to be [backslash][two-byte character][.][f][o][o], but
because the second byte of the two-byte character is 0x5c, we incorrectly
treat it as another backslash. And because the next character is a dot, we
parse it as end-of-copy marker, and throw an "end-of-copy marker corrupt"
error.
Backpatch to all supported versions.
Reviewed-by: John Naylor, Kyotaro Horiguchi
Discussion: https://www.postgresql.org/message-id/a897f84f-8dca-8798-3139-07da5bb38728%40iki.fi
