In a synchronous logical setup, locking [user] catalog tables can cause
deadlock. This is because logical decoding of transactions can lock
catalog tables to access them so exclusively locking those in transactions
can lead to deadlock. To avoid this users must refrain from having
exclusive locks on catalog tables.
Author: Takamichi Osumi
Reviewed-by: Vignesh C, Amit Kapila
Backpatch-through: 9.6
Discussion: https://www.postgresql.org/message-id/20210222222847.tpnb6eg3yiykzpky%40alap3.anarazel.de
PersistHoldablePortal has long assumed that it should store the
entire output of the query-to-be-persisted, which requires rewinding
and re-reading the output. This is problematic if the query is not
stable: we might get different row contents, or even a different
number of rows, which'd confuse the cursor state mightily.
In the case where the cursor is NO SCROLL, this is very easy to
solve: just store the remaining query output, without any rewinding,
and tweak the portal's cursor state to match. Aside from removing
the semantic problem, this could be significantly more efficient
than storing the whole output.
If the cursor is scrollable, there's not much we can do, but it
was already the case that scrolling a volatile query's result was
pretty unsafe. We can just document more clearly that getting
correct results from that is not guaranteed.
There are already prohibitions in place on using SCROLL with
FOR UPDATE/SHARE, which is one way for a SELECT query to have
non-stable results. We could imagine prohibiting SCROLL when
the query contains volatile functions, but that would be
expensive to enforce. Moreover, it could break applications
that work just fine, if they have functions that are in fact
stable but the user neglected to mark them so. So settle for
documenting the hazard.
While this problem has existed in some guise for a long time,
it got a lot worse in v11, which introduced the possibility
of persisting plpgsql cursors (perhaps implicit ones) even
when they violate the rules for what can be marked WITH HOLD.
Hence, I've chosen to back-patch to v11 but not further.
Per bug #17050 from Алексей Булгаков.
Discussion: https://postgr.es/m/17050-f77aa827dc85247c@postgresql.org
The following parameters have been imprecise, or incorrect, about their
description (PGC_POSTMASTER or PGC_SIGHUP):
- autovacuum_work_mem (docs, as of 9.6~)
- huge_page_size (docs, as of 14~)
- max_logical_replication_workers (docs, as of 10~)
- max_sync_workers_per_subscription (docs, as of 10~)
- min_dynamic_shared_memory (docs, as of 14~)
- recovery_init_sync_method (postgresql.conf.sample, as of 14~)
- remove_temp_files_after_crash (docs, as of 14~)
- restart_after_crash (docs, as of 9.6~)
- ssl_min_protocol_version (docs, as of 12~)
- ssl_max_protocol_version (docs, as of 12~)
This commit adjusts the description of all these parameters to be more
consistent with the practice used for the others.
Revewed-by: Justin Pryzby
Discussion: https://postgr.es/m/YK2ltuLpe+FbRXzA@paquier.xyz
Backpatch-through: 9.6
Formerly we just relied on operator classes that assert longValuesOK
to eventually shorten the leaf value enough to fit on an index page.
That fails since the introduction of INCLUDE-column support (commit
09c1c6ab4), because the INCLUDE columns might alone take up more
than a page, meaning no amount of leaf-datum compaction will get
the job done. At least with spgtextproc.c, that leads to an infinite
loop, since spgtextproc.c won't throw an error for not being able
to shorten the leaf datum anymore.
To fix without breaking cases that would otherwise work, add logic
to spgdoinsert() to verify that the leaf tuple size is decreasing
after each "choose" step. Some opclasses might not decrease the
size on every single cycle, and in any case, alignment roundoff
of the tuple size could obscure small gains. Therefore, allow
up to 10 cycles without additional savings before throwing an
error. (Perhaps this number will need adjustment, but it seems
quite generous right now.)
As long as we've developed this logic, let's back-patch it.
The back branches don't have INCLUDE columns to worry about, but
this seems like a good defense against possible bugs in operator
classes. We already know that an infinite loop here is pretty
unpleasant, so having a defense seems to outweigh the risk of
breaking things. (Note that spgtextproc.c is actually the only
known opclass with longValuesOK support, so that this is all moot
for known non-core opclasses anyway.)
Per report from Dilip Kumar.
Discussion: https://postgr.es/m/CAFiTN-uxP_soPhVG840tRMQTBmtA_f_Y8N51G7DKYYqDh7XN-A@mail.gmail.com
Make sample like_regex match string values of the root object instead of the
whole document. The corrected example seems to represent a more relevant
use case.
Backpatch to 12, when jsonpath was introduced.
Discussion: https://postgr.es/m/13440f8b-4c1f-5875-c8e3-f3f65606af2f%40xs4all.nl
Author: Erik Rijkers
Reviewed-by: Michael Paquier, Alexander Korotkov
Backpatch-through: 12
Mention specifically that you can't call aggregates, window functions,
or procedures this way (the inability to call SRFs was already
mentioned).
Also, the claim that PQfn doesn't support NULL arguments or results
has been a lie since we invented protocol 3.0. Not sure why this
text was never updated for that, but do it now.
Discussion: https://postgr.es/m/2039442.1615317309@sss.pgh.pa.us
For some reason, the "julian" option for extract()/date_part() has
never gotten listed in the manual. Also, while Appendix B mentioned
in passing that we don't conform to the usual astronomical definition
that a Julian date starts at noon UTC, it was kind of vague about what
we do instead. Clarify that, and add an example showing how to get
the astronomical definition if you want it.
It's been like this for ages, so back-patch to all supported branches.
Discussion: https://postgr.es/m/1197050.1619123213@sss.pgh.pa.us
Previously it was documented that if using "-X none" option there was
no guarantee that all required WAL files were archived at the end of
pg_basebackup when taking a backup from the standby. But this limitation
was removed by commit 52f8a59dd9. Now, even when taking a backup
from the standby, pg_basebackup can wait for all required WAL files
to be archived. Therefore this commit removes such obsolete
description from the docs.
Also this commit adds new description about the limitation when
taking a backup from the standby, into the docs. The limitation is that
pg_basebackup cannot force the standbfy to switch to a new WAL file
at the end of backup, which may cause pg_basebackup to wait a long
time for the last required WAL file to be switched and archived,
especially when write activity on the primary is low.
Back-patch to v10 where the issue was introduced.
Reported-by: Kyotaro Horiguchi
Author: Kyotaro Horiguchi, Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/20210420.133235.1342729068750553399.horikyota.ntt@gmail.com
Comment fixes are applied on HEAD, and documentation improvements are
applied on back-branches where needed.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20210408164008.GJ6592@telsasoft.com
Backpatch-through: 9.6
Command-line options, or previous "ALTER (ROLE|DATABASE) ...
SET ROLE ..." commands, can change the value of the default role
for a session. In the presence of one of these, RESET ROLE will
change the current user identifier to the default role rather
than the session user identifier. Fix the documentation to
reflect this reality. Backpatch to all supported versions.
Author: Nathan Bossart
Reviewed-By: Laurenz Albe, David G. Johnston, Joe Conway
Reported by: Nathan Bossart
Discussion: https://postgr.es/m/flat/925134DB-8212-4F60-8AB1-B1231D750CB4%40amazon.com
Backpatch-through: 9.6
The current instructions describing how to write the backup_label and
tablespace_map files are confusing. For example, opening a file in text
mode on Windows and copy-pasting the file's contents would result in a
failure at recovery because of the extra CRLF characters generated. The
documentation was not stating that clearly, and per discussion this is
not considered as a supported scenario.
This commit extends a bit the documentation to mention that it may be
required to open the file in binary mode before writing its data.
Reported-by: Wang Shenhao
Author: David Steele
Reviewed-by: Andrew Dunstan, Magnus Hagander
Discussion: https://postgr.es/m/8373f61426074f2cb6be92e02f838389@G08CNEXMBPEKD06.g08.fujitsu.local
Backpatch-through: 9.6
Some sections of the documentation used "exclusive lock" to describe
that an ACCESS EXCLUSIVE lock is taken during a given operation. This
can be confusing to the reader as ACCESS SHARE is allowed with an
EXCLUSIVE lock is used, but that would not be the case with what is
described on those parts of the documentation.
Author: Greg Rychlewski
Discussion: https://postgr.es/m/CAKemG7VptD=7fNWckFMsMVZL_zzvgDO6v2yVmQ+ZiBfc_06kCQ@mail.gmail.com
Backpatch-through: 9.6
The new appendix groups information on renamed or removed settings,
commands, etc into an out-of-the-way part of the docs.
The original id elements are retained in each subsection to ensure that
the same filenames are produced for HTML docs. This prevents /current/
links on the web from breaking, and allows users of the web docs
to follow links from old version pages to info on the changes in the
new version. Prior to this change, a link to /current/ for renamed
sections like the recovery.conf docs would just 404. Similarly if
someone searched for recovery.conf they would find the pg11 docs,
but there would be no /12/ or /current/ link, so they couldn't easily
find out that it was removed in pg12 or how to adapt.
Index entries are also added so that there's a breadcrumb trail for
users to follow when they know the old name, but not what we changed it
to. So a user who is trying to find out how to set standby_mode in
PostgreSQL 12+, or where pg_resetxlog went, now has more chance of
finding that information.
Craig Ringer and Stephen Frost
Reviewed-by: Euler Taveira
Discussion: https://postgr.es/m/CAGRY4nzPNOyYQ_1-pWYToUVqQ0ThqP5jdURnJMZPm539fdizOg%40mail.gmail.com
Backpatch-through: 10
On partition detach, we acquire a SHARE lock on all tables that
reference the partitioned table that we're detaching a partition from,
but failed to document this fact. My oversight in commit f56f8f8da6.
Repair. Backpatch to 12.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20210325180244.GA12738@alvherre.pgsql
A couple error messages and comments used 'statistic kind', not the
correct 'statistics kind'. Fix and backpatch all the way back to 10,
where extended statistics were introduced.
Backpatch-through: 10
Robert Foggia of Trustwave reported that read_tablespace_map()
fails to prevent an overrun of its on-stack input buffer.
Since the tablespace map file is presumed trustworthy, this does
not seem like an interesting security vulnerability, but still
we should fix it just in the name of robustness.
While here, document that pg_basebackup's --tablespace-mapping option
doesn't work with tar-format output, because it doesn't. To make it
work, we'd have to modify the tablespace_map file within the tarball
sent by the server, which might be possible but I'm not volunteering.
(Less-painful solutions would require changing the basebackup protocol
so that the source server could adjust the map. That's not very
appetizing either.)
GENERATED ALWAYS AS IDENTITY implies NOT NULL, but the code failed
to complain if you overrode that with "GENERATED ALWAYS AS IDENTITY
NULL". One might think the old behavior was a feature, but it was
inconsistent because the outcome varied depending on the order of
the clauses, so it seems to have been just an oversight.
Per bug #16913 from Pavel Boev. Back-patch to v10 where identity
columns were introduced.
Vik Fearing (minor tweaks by me)
Discussion: https://postgr.es/m/16913-3b5198410f67d8c6@postgresql.org
Clarify the discussion in "User-Defined Procedures", by laying out
the key differences between functions and procedures in a bulleted
list. Notably, this avoids burying the lede about procedures being
able to do transaction control. Make the back-link in the CREATE
FUNCTION reference page more prominent, and add one in CREATE
PROCEDURE.
Per gripe from Guyren Howe. Thanks to David Johnston for discussion.
Discussion: https://postgr.es/m/BYAPR03MB4903C53A8BB7EFF5EA289674A6949@BYAPR03MB4903.namprd03.prod.outlook.com
Break the synopsis into named parts to make it less confusing.
Make more than zero effort at applying SGML markup. Do a bit
of copy-editing of nearby text.
The synopsis revision is by Alvaro Herrera and Paul Förster,
the rest is my fault. Back-patch to v10 where multi-host
connection strings appeared.
Discussion: https://postgr.es/m/6E752D6B-487C-463E-B6E2-C32E7FB007EA@gmail.com
FreeBSD 13 gained O_DSYNC, which would normally cause wal_sync_method to
choose open_datasync as its default value. That may not be a good
choice for all systems, and performs worse than fdatasync in some
scenarios. Let's preserve the existing default behavior for now.
Like commit 576477e73c, which did the same for Linux, back-patch to all
supported releases.
Discussion: https://postgr.es/m/CA%2BhUKGLsAMXBQrCxCXoW-JsUYmdOL8ALYvaX%3DCrHqWxm-nWbGA%40mail.gmail.com
When the .** jsonpath accessor handles the array, it selects both array and
each of its elements. When using lax mode, subsequent accessors automatically
unwrap arrays. So, the content of each array element may be selected twice.
Even though this behavior is counterintuitive, it's correct because everything
works as designed. This commit documents it.
Backpatch to 12 where the jsonpath language was introduced.
Reported-by: Thomas Kellerer
Bug: #16828
Discussion: https://postgr.es/m/16828-2b0229babfad2d8c%40postgresql.org
Discussion: https://postgr.es/m/CAPpHfdtS-nNidT%3DEqZbAYOPcnNOWh_sd6skVdu2CAQUGdvpT8Q%40mail.gmail.com
Author: Alexandex Korotkov, revised by Tom Lane
Reviewed-by: Alvaro Herrera, Thomas Kellerer, Tom Lane
Backpatch-through: 12
The page about privilege rights mentioned that TRUNCATE could be applied
to views or even other relation types. This is confusing as this
command can be used only on tables and on partitioned tables.
Oversight in afc4a78.
Reported-by: Harisai Hari
Reviewed-by: Laurenz Albe
Discussion: https://postgr.es/m/161157636877.14625.15340884663716426087@wrigleys.postgresql.org
Backpatch-through: 12
In light of recent discussions, we should instruct people to
install Apple's command line tools; installing Xcode is secondary.
Also, fix sample command for finding out the default sysroot,
as we now know that the command originally recommended can give
a result that doesn't match your OS version.
Also document the workaround to use if you really don't want
configure to select a sysroot at all.
Discussion: https://postgr.es/m/20210119111625.20435-1-james.hilliard1@gmail.com
This text claimed that the reconnection would occur "to the same
server", but there is no such guarantee in the code, nor would
insisting on that be an improvement.
Back-patch to v10 where multi-host connection strings were added.
Discussion: https://postgr.es/m/1095901.1611268376@sss.pgh.pa.us
When a tablespace is used in a partitioned relation (per commits
ca4103025d in pg12 for tables and 33e6c34c32 in pg11 for indexes),
it is possible to drop the tablespace, potentially causing various
problems. One such was reported in bug #16577, where a rewriting ALTER
TABLE causes a server crash.
Protect against this by using pg_shdepend to keep track of tablespaces
when used for relations that don't keep physical files; we now abort a
tablespace if we see that the tablespace is referenced from any
partitioned relations.
Backpatch this to 11, where this problem has been latent all along. We
don't try to create pg_shdepend entries for existing partitioned
indexes/tables, but any ones that are modified going forward will be
protected.
Note slight behavior change: when trying to drop a tablespace that
contains both regular tables as well as partitioned ones, you'd
previously get ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE and now you'll
get ERRCODE_DEPENDENT_OBJECTS_STILL_EXIST. Arguably, the latter is more
correct.
It is possible to add protecting pg_shdepend entries for existing
tables/indexes, by doing
ALTER TABLE ONLY some_partitioned_table SET TABLESPACE pg_default;
ALTER TABLE ONLY some_partitioned_table SET TABLESPACE original_tablespace;
for each partitioned table/index that is not in the database default
tablespace. Because these partitioned objects do not have storage, no
file needs to be actually moved, so it shouldn't take more time than
what's required to acquire locks.
This query can be used to search for such relations:
SELECT ... FROM pg_class WHERE relkind IN ('p', 'I') AND reltablespace <> 0
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/16577-881633a9f9894fd5@postgresql.org
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
The point of this restriction is to avoid trying to substitute variables
into timestamp literal values, which may contain strings like '12:34'.
There is a good deal more that should be done to reduce pgbench's
tendency to substitute where it shouldn't. But this is sufficient to
solve the case complained of by Jaime Soler, and it's simple enough
to back-patch.
Back-patch to v11; before commit 9d36a3866, pgbench had a slightly
different definition of what a variable name is, and anyway it seems
unwise to change long-stable branches for this.
Fabien Coelho
Discussion: https://postgr.es/m/alpine.DEB.2.22.394.2006291740420.805678@pseudo
The documentation of pg_rewind mentioned the use of restore_command and
primary_conninfo as options available at startup to fetch missing WAL
segments that could be used to find the point of divergence for the
rewind. This is confusing because when finding the point of divergence
the target cluster is offline, so this option is not available.
Issue introduced by 878bd9a, so backpatch down to 9.6. The
documentation of 13 and HEAD was already right as this sentence has been
changed by a7e8ece when introducing -c/--restore-target-wal.
Reported-by: Amine Tengilimoglu
Discussion: https://postgr.es/m/CADTdw-w_0MP=iQrfizeU4QU5fcZb+w8P_oPeLL+WznWf0kbn3w@mail.gmail.com
Backpatch-through: 9.6
The default value of recovery_target_timeline was changed in v12,
but the description about the default behavior of that was not updated.
Back-patch to v12 where the default behavior of recovery_target_timeline
was changed.
Author: Benoit Lobréau
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CAPE8EZ7c3aruEmM24GYkj8y8WmHKD1m9TtPtgCF0nQ3zw4LCkQ@mail.gmail.com
Amit Kapila
Tom Lane
Michael Paquier
Alexander Korotkov
Alvaro Herrera
Fujii Masao
Joe Conway
Bruce Momjian
Stephen Frost
Tomas Vondra
Magnus Hagander
Thomas Munro