exec_for_query() normally tries to prefetch a few rows at a time
from the query being iterated over, so as to reduce executor
entry/exit overhead. Unfortunately this is unsafe if we have
COMMIT or ROLLBACK within the loop, because there might be
TOAST references in the data that we prefetched but haven't
yet examined. Immediately after the COMMIT/ROLLBACK, we have
no snapshots in the session, meaning that VACUUM is at liberty
to remove recently-deleted TOAST rows.
This was originally reported as a case triggering the "no known
snapshots" error in init_toast_snapshot(), but even if you miss
hitting that, you can get "missing toast chunk", as illustrated
by the added isolation test case.
To fix, just disable prefetching in non-atomic contexts. Maybe
there will be performance complaints prompting us to work harder
later, but it's not clear at the moment that this really costs
much, and I doubt we'd want to back-patch any complicated fix.
In passing, adjust that error message in init_toast_snapshot()
to be a little clearer about the likely cause of the problem.
Patch by me, based on earlier investigation by Konstantin Knizhnik.
Per bug #15990 from Andreas Wicht. Back-patch to v11 where
intra-procedure COMMIT was added.
Discussion: https://postgr.es/m/15990-eee2ac466b11293d@postgresql.org
"typename" is a C++ keyword, so pg_upgrade.h fails to compile in C++.
Fortunately, there seems no likely reason for somebody to need to
do that. Nonetheless, it's project policy that all .h files should
pass cpluspluscheck, so rename the argument to fix that.
Oversight in 57c081de0; back-patch as that was. (The policy requiring
pg_upgrade.h to pass cpluspluscheck only goes back to v12, but it
seems best to keep this code looking the same in all branches.)
ForgetBackgroundWorker lacked any memory barrier at all, while
BackgroundWorkerStateChange had one but unaccountably did
additional manipulation of the slot after the barrier. AFAICS,
the rule must be that the barrier is immediately before setting
or clearing slot->in_use.
It looks like back in 9.6 when ForgetBackgroundWorker was first
written, there might have been some case for not needing a
barrier there, but I'm not very convinced of that --- the fact
that the load of bgw_notify_pid is in the caller doesn't seem
to guarantee no memory ordering problem. So patch 9.6 too.
It's likely that this doesn't fix any observable bug on Intel
hardware, but machines with weaker memory ordering rules could
have problems here.
Discussion: https://postgr.es/m/4046084.1620244003@sss.pgh.pa.us
Formerly we just relied on operator classes that assert longValuesOK
to eventually shorten the leaf value enough to fit on an index page.
That fails since the introduction of INCLUDE-column support (commit
09c1c6ab4), because the INCLUDE columns might alone take up more
than a page, meaning no amount of leaf-datum compaction will get
the job done. At least with spgtextproc.c, that leads to an infinite
loop, since spgtextproc.c won't throw an error for not being able
to shorten the leaf datum anymore.
To fix without breaking cases that would otherwise work, add logic
to spgdoinsert() to verify that the leaf tuple size is decreasing
after each "choose" step. Some opclasses might not decrease the
size on every single cycle, and in any case, alignment roundoff
of the tuple size could obscure small gains. Therefore, allow
up to 10 cycles without additional savings before throwing an
error. (Perhaps this number will need adjustment, but it seems
quite generous right now.)
As long as we've developed this logic, let's back-patch it.
The back branches don't have INCLUDE columns to worry about, but
this seems like a good defense against possible bugs in operator
classes. We already know that an infinite loop here is pretty
unpleasant, so having a defense seems to outweigh the risk of
breaking things. (Note that spgtextproc.c is actually the only
known opclass with longValuesOK support, so that this is all moot
for known non-core opclasses anyway.)
Per report from Dilip Kumar.
Discussion: https://postgr.es/m/CAFiTN-uxP_soPhVG840tRMQTBmtA_f_Y8N51G7DKYYqDh7XN-A@mail.gmail.com
Knowing that a buggy opclass could cause an infinite insertion loop,
spgdoinsert() intended to allow its loop to be interrupted by query
cancel. However, that never actually worked, because in iterations
after the first, we'd be holding buffer lock(s) which would cause
InterruptHoldoffCount to be positive, preventing servicing of the
interrupt.
To fix, check if an interrupt is pending, and if so fall out of
the insertion loop and service the interrupt after we've released
the buffers. If it was indeed a query cancel, that's the end of
the matter. If it was a non-canceling interrupt reason, make use
of the existing provision to retry the whole insertion. (This isn't
as wasteful as it might seem, since any upper-level index tuples we
already created should be usable in the next attempt.)
While there's no known instance of such a bug in existing release
branches, it still seems like a good idea to back-patch this to
all supported branches, since the behavior is fairly nasty if a
loop does happen --- not only is it uncancelable, but it will
quickly consume memory to the point of an OOM failure. In any
case, this code is certainly not working as intended.
Per report from Dilip Kumar.
Discussion: https://postgr.es/m/CAFiTN-uxP_soPhVG840tRMQTBmtA_f_Y8N51G7DKYYqDh7XN-A@mail.gmail.com
Split up CHECK_FOR_INTERRUPTS() to provide an additional macro
INTERRUPTS_PENDING_CONDITION(), which just tests whether an
interrupt is pending without attempting to service it. This is
useful in situations where the caller knows that interrupts are
blocked, and would like to find out if it's worth the trouble
to unblock them.
Also add INTERRUPTS_CAN_BE_PROCESSED(), which indicates whether
CHECK_FOR_INTERRUPTS() can be relied on to clear the pending interrupt.
This commit doesn't actually add any uses of the new macros,
but a follow-on bug fix will do so. Back-patch to all supported
branches to provide infrastructure for that fix.
Alvaro Herrera and Tom Lane
Discussion: https://postgr.es/m/20210513155351.GA7848@alvherre.pgsql
Make sample like_regex match string values of the root object instead of the
whole document. The corrected example seems to represent a more relevant
use case.
Backpatch to 12, when jsonpath was introduced.
Discussion: https://postgr.es/m/13440f8b-4c1f-5875-c8e3-f3f65606af2f%40xs4all.nl
Author: Erik Rijkers
Reviewed-by: Michael Paquier, Alexander Korotkov
Backpatch-through: 12
The worker.c global wrconn is only meant to be used by logical apply/
tablesync workers, but there are other variables with the same name. To
reduce future confusion rename the global from "wrconn" to
"LogRepWorkerWalRcvConn".
While this is just cosmetic, it seems better to backpatch it all the way
back to 10 where this code appeared, to avoid future backpatching
issues.
Author: Peter Smith <smithpb2250@gmail.com>
Discussion: https://postgr.es/m/CAHut+Pu7Jv9L2BOEx_Z0UtJxfDevQSAUW2mJqWU+CtmDrEZVAg@mail.gmail.com
It's unusual to have any resjunk columns in an ON CONFLICT ... UPDATE
list, but it can happen when MULTIEXPR_SUBLINK SubPlans are present.
If it happens, the ON CONFLICT UPDATE code path would end up storing
tuples that include the values of the extra resjunk columns. That's
fairly harmless in the short run, but if new columns are added to
the table then the values would become accessible, possibly leading
to malfunctions if they don't match the datatypes of the new columns.
This had escaped notice through a confluence of missing sanity checks,
including
* There's no cross-check that a tuple presented to heap_insert or
heap_update matches the table rowtype. While it's difficult to
check that fully at reasonable cost, we can easily add assertions
that there aren't too many columns.
* The output-column-assignment cases in execExprInterp.c lacked
any sanity checks on the output column numbers, which seems like
an oversight considering there are plenty of assertion checks on
input column numbers. Add assertions there too.
* We failed to apply nodeModifyTable's ExecCheckPlanOutput() to
the ON CONFLICT UPDATE tlist. That wouldn't have caught this
specific error, since that function is chartered to ignore resjunk
columns; but it sure seems like a bad omission now that we've seen
this bug.
In HEAD, the right way to fix this is to make the processing of
ON CONFLICT UPDATE tlists work the same as regular UPDATE tlists
now do, that is don't add "SET x = x" entries, and use
ExecBuildUpdateProjection to evaluate the tlist and combine it with
old values of the not-set columns. This adds a little complication
to ExecBuildUpdateProjection, but allows removal of a comparable
amount of now-dead code from the planner.
In the back branches, the most expedient solution seems to be to
(a) use an output slot for the ON CONFLICT UPDATE projection that
actually matches the target table, and then (b) invent a variant of
ExecBuildProjectionInfo that can be told to not store values resulting
from resjunk columns, so it doesn't try to store into nonexistent
columns of the output slot. (We can't simply ignore the resjunk columns
altogether; they have to be evaluated for MULTIEXPR_SUBLINK to work.)
This works back to v10. In 9.6, projections work much differently and
we can't cheaply give them such an option. The 9.6 version of this
patch works by inserting a JunkFilter when it's necessary to get rid
of resjunk columns.
In addition, v11 and up have the reverse problem when trying to
perform ON CONFLICT UPDATE on a partitioned table. Through a
further oversight, adjust_partition_tlist() discarded resjunk columns
when re-ordering the ON CONFLICT UPDATE tlist to match a partition.
This accidentally prevented the storing-bogus-tuples problem, but
at the cost that MULTIEXPR_SUBLINK cases didn't work, typically
crashing if more than one row has to be updated. Fix by preserving
resjunk columns in that routine. (I failed to resist the temptation
to add more assertions there too, and to do some minor code
beautification.)
Per report from Andres Freund. Back-patch to all supported branches.
Security: CVE-2021-32028
While we were (mostly) careful about ensuring that the dimensions of
arrays aren't large enough to cause integer overflow, the lower bound
values were generally not checked. This allows situations where
lower_bound + dimension overflows an integer. It seems that that's
harmless so far as array reading is concerned, except that array
elements with subscripts notionally exceeding INT_MAX are inaccessible.
However, it confuses various array-assignment logic, resulting in a
potential for memory stomps.
Fix by adding checks that array lower bounds aren't large enough to
cause lower_bound + dimension to overflow. (Note: this results in
disallowing cases where the last subscript position would be exactly
INT_MAX. In principle we could probably allow that, but there's a lot
of code that computes lower_bound + dimension and would need adjustment.
It seems doubtful that it's worth the trouble/risk to allow it.)
Somewhat independently of that, array_set_element() was careless
about possible overflow when checking the subscript of a fixed-length
array, creating a different route to memory stomps. Fix that too.
Security: CVE-2021-32027
This patch replaces use of the global "wrconn" variable in
AlterSubscription_refresh with a local variable of the same name, making
it consistent with other functions in subscriptioncmds.c (e.g.
DropSubscription).
The global wrconn is only meant to be used for logical apply/tablesync worker.
Abusing it this way is known to cause trouble if an apply worker
manages to do a subscription refresh, such as reported by Jeremy Finzel
and diagnosed by Andres Freund back in November 2020, at
https://www.postgresql.org/message-id/20201111215820.qihhrz7fayu6myfi@alap3.anarazel.de
Backpatch to 10. In branch master, also move the connection establishment
to occur outside the PG_TRY block; this way we can remove a test for NULL in
PG_FINALLY, and it also makes the code more consistent with similar code in
the same file.
Author: Peter Smith <peter.b.smith@fujitsu.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Japin Li <japinli@hotmail.com>
Discussion: https://postgr.es/m/CAHut+Pu7Jv9L2BOEx_Z0UtJxfDevQSAUW2mJqWU+CtmDrEZVAg@mail.gmail.com
When ALTER TABLE .. ALTER CONSTRAINT changes deferrability properties
changed in a partitioned table, we failed to propagate those changes
correctly to partitions and to triggers. Repair by adding a recursion
mechanism to affect all derived constraints and all derived triggers.
(In particular, recurse to partitions even if their respective parents
are already in the desired state: it is possible for the partitions to
have been altered individually.) Because foreign keys involve tables in
two sides, we cannot use the standard ALTER TABLE recursion mechanism,
so we invent our own by following pg_constraint.conparentid down.
When ALTER TABLE .. ALTER CONSTRAINT is invoked on the derived
pg_constraint object that's automaticaly created in a partition as a
result of a constraint added to its parent, raise an error instead of
pretending to work and then failing to modify all the affected triggers.
Before this commit such a command would be allowed but failed to affect
all triggers, so it would silently misbehave. (Restoring dumps of
existing databases is not affected, because pg_dump does not produce
anything for such a derived constraint anyway.)
Add some tests for the case.
Backpatch to 11, where foreign key support was added to partitioned
tables by commit 3de241dba8. (A related change is commit f56f8f8da6
in pg12 which added support for FKs *referencing* partitioned tables;
this is what forces us to use an ad-hoc recursion mechanism for this.)
Diagnosed by Tom Lane from bug report from Ron L Johnson. As of this
writing, no reviews were offered.
Discussion: https://postgr.es/m/75fe0761-a291-86a9-c8d8-4906da077469@gmail.com
Discussion: https://postgr.es/m/3144850.1607369633@sss.pgh.pa.us
The OID of the constraint is used instead of the OID of the trigger --
an easy mistake to make. Apparently the object-alter hooks are not very
well tested :-(
Backpatch to 12, where this typo was introduced by 578b229718
Discussion: https://postgr.es/m/20210503231633.GA6994@alvherre.pgsql
When running ALTER TABLE t2 INHERIT t1, we must check that columns in
t2 that correspond to a generated column in t1 are also generated and
have the same generation expression. Otherwise, this would allow
creating setups that a normal CREATE TABLE sequence would not allow.
Discussion: https://www.postgresql.org/message-id/22de27f6-7096-8d96-4619-7b882932ca25@2ndquadrant.com
Mention specifically that you can't call aggregates, window functions,
or procedures this way (the inability to call SRFs was already
mentioned).
Also, the claim that PQfn doesn't support NULL arguments or results
has been a lie since we invented protocol 3.0. Not sure why this
text was never updated for that, but do it now.
Discussion: https://postgr.es/m/2039442.1615317309@sss.pgh.pa.us
Reject aggregates, window functions, and procedures. Aggregates
failed anyway, though with a somewhat obscure error message.
Window functions would hit an Assert or null-pointer dereference.
Procedures seemed to work as long as you didn't try to do
transaction control, but (a) transaction control is sort of the
point of a procedure, and (b) it's not entirely clear that no
bugs lurk in that path. Given the lack of testing of this area,
it seems safest to be conservative in what we support.
Also reject proretset functions, as the fastpath protocol can't
support returning a set.
Also remove an easily-triggered assertion that the given OID
isn't 0; the subsequent lookups can handle that case themselves.
Per report from Theodor-Arsenij Larionov-Trichkin.
Back-patch to all supported branches. (The procedure angle
only applies in v11+, of course.)
Discussion: https://postgr.es/m/2039442.1615317309@sss.pgh.pa.us
Commits 29aeda6e4 et al closed up some oversights involving not checking
for non-upgradable types within container types, such as arrays and
ranges. However, I only looked at version.c, failing to notice that
there were substantially-equivalent tests in check.c. (The division
of responsibility between those files is less than clear...)
In addition, because genbki.pl does not guarantee that auto-generated
rowtype OIDs will hold still across versions, we need to consider that
the composite type associated with a system catalog or view is
non-upgradable. It seems unlikely that someone would have a user
column declared that way, but if they did, trying to read it in another
PG version would likely draw "no such pg_type OID" failures, thanks
to the type OID embedded in composite Datums.
To support the composite and reg*-type cases, extend the recursive
query that does the search to allow any base query that returns
a column of pg_type OIDs, rather than limiting it to exactly one
starting type.
As before, back-patch to all supported branches.
Discussion: https://postgr.es/m/2798740.1619622555@sss.pgh.pa.us
Attempting to use this function with event triggers failed, as, since
its introduction in a676201, this code has never associated an object
name with event triggers. This addresses the failure by adding the
event trigger name to the set defining its object address.
Note that regression tests are added within event_trigger and not
object_address to avoid issues with concurrent connections in parallel
schedules.
Author: Joel Jacobson
Discussion: https://postgr.es/m/3c905e77-a026-46ae-8835-c3f6cd1d24c8@www.fastmail.com
Backpatch-through: 9.6
For some reason, the "julian" option for extract()/date_part() has
never gotten listed in the manual. Also, while Appendix B mentioned
in passing that we don't conform to the usual astronomical definition
that a Julian date starts at noon UTC, it was kind of vague about what
we do instead. Clarify that, and add an example showing how to get
the astronomical definition if you want it.
It's been like this for ages, so back-patch to all supported branches.
Discussion: https://postgr.es/m/1197050.1619123213@sss.pgh.pa.us
Previously it was documented that if using "-X none" option there was
no guarantee that all required WAL files were archived at the end of
pg_basebackup when taking a backup from the standby. But this limitation
was removed by commit 52f8a59dd9. Now, even when taking a backup
from the standby, pg_basebackup can wait for all required WAL files
to be archived. Therefore this commit removes such obsolete
description from the docs.
Also this commit adds new description about the limitation when
taking a backup from the standby, into the docs. The limitation is that
pg_basebackup cannot force the standbfy to switch to a new WAL file
at the end of backup, which may cause pg_basebackup to wait a long
time for the last required WAL file to be switched and archived,
especially when write activity on the primary is low.
Back-patch to v10 where the issue was introduced.
Reported-by: Kyotaro Horiguchi
Author: Kyotaro Horiguchi, Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/20210420.133235.1342729068750553399.horikyota.ntt@gmail.com
Adopt a more consistent policy about what slot-type-specific
getsysattr functions should do when system attributes are not
available. To wit, they should all throw the same user-oriented
error, rather than variously crashing or emitting developer-oriented
messages.
This closes a identifiable problem in commits a71cfc56b and
3fb93103a (in v13 and v12), so back-patch into those branches,
along with a test case to try to ensure we don't break it again.
It is not known that any of the former crash cases are reachable
in HEAD, but this seems like a good safety improvement in any case.
Discussion: https://postgr.es/m/141051591267657@mail.yandex.ru
If the source and destination partitions don't have identical
rowtypes (for example, one has dropped columns the other lacks),
then the planSlot contents will be different because of that.
If the query has a RETURNING list that tries to return resjunk
columns out of the planSlot, that is columns from tables that
were joined to the target table, we'd get errors or wrong answers.
That's because we used the RETURNING list generated for the
destination partition, which expects a planSlot matching that
partition's subplan.
The most practical fix seems to be to convert the updated destination
tuple back to the source partition's rowtype, and then apply the
RETURNING list generated for the source partition. This avoids making
fragile assumptions about whether the per-subpartition subplans
generated all the resjunk columns in the same order.
This has been broken since v11 introduced cross-partition UPDATE.
The lack of field complaints shows that non-identical partitions
aren't a common case; therefore, don't stress too hard about
making the conversion efficient.
There's no such bug in HEAD, because commit 86dc90056 got rid of
per-target-relation variance in the contents of the planSlot.
Hence, patch v11-v13 only.
Amit Langote and Etsuro Fujita, small changes by me
Discussion: https://postgr.es/m/CA+HiwqE_UK1jTSNrjb8mpTdivzd3dum6mK--xqKq0Y9VmfwWQA@mail.gmail.com
In order to avoid getting old logfile contents certain functions in
PostgresNode were doing one of two things. On Windows it rotated the
logfile and restarted the server, while elsewhere it truncated the log
file. Both of these are unnecessary. We borrow from the buildfarm which
does this instead: note the size of the logfile before we start, and
then when fetching the logfile skip to that position before accumulating
contents. This is spelled differently on Windows but the effect is the
same. This is largely centralized in TestLib's slurp_file function,
which has a new optional parameter, the offset to skip to before
starting to reading the file. Code in the client becomes much neater.
Backpatch to all live branches.
Michael Paquier, slightly modified by me.
Discussion: https://postgr.es/m/YHajnhcMAI3++pJL@paquier.xyz
Most GUC check hooks that inspect database state have special checks
that prevent them from throwing hard errors for state-dependent issues
when source == PGC_S_TEST. This allows, for example,
"ALTER DATABASE d SET default_text_search_config = foo" when the "foo"
configuration hasn't been created yet. Without this, we have problems
during dump/reload or pg_upgrade, because pg_dump has no idea about
possible dependencies of GUC values and can't ensure a safe restore
ordering.
However, check_role() and check_session_authorization() hadn't gotten
the memo about that, and would throw hard errors anyway. It's not
entirely clear what is the use-case for "ALTER ROLE x SET role = y",
but we've now heard two independent complaints about that bollixing
an upgrade, so apparently some people are doing it.
Hence, fix these two functions to act more like other check hooks
with similar needs. (But I did not change their insistence on
being inside a transaction, as it's still not apparent that setting
either GUC from the configuration file would be wise.)
Also fix check_temp_buffers, which had a different form of the disease
of making state-dependent checks without any exception for PGC_S_TEST.
A cursory survey of other GUC check hooks did not find any more issues
of this ilk. (There are a lot of interdependencies among
PGC_POSTMASTER and PGC_SIGHUP GUCs, which may be a bad idea, but
they're not relevant to the immediate concern because they can't be
set via ALTER ROLE/DATABASE.)
Per reports from Charlie Hornsby and Nathan Bossart. Back-patch
to all supported branches.
Discussion: https://postgr.es/m/HE1P189MB0523B31598B0C772C908088DB7709@HE1P189MB0523.EURP189.PROD.OUTLOOK.COM
Discussion: https://postgr.es/m/20160711223641.1426.86096@wrigleys.postgresql.org
Previously, get_cached_rowtype() cached a pointer to a reference-counted
tuple descriptor from the typcache, relying on the ExprContextCallback
mechanism to release the tupdesc refcount when the expression tree
using the tupdesc was destroyed. This worked fine when it was designed,
but the introduction of within-DO-block COMMITs broke it. The refcount
is logged in a transaction-lifespan resource owner, but plpgsql won't
destroy simple expressions made within the DO block (before its first
commit) until the DO block is exited. That results in a warning about
a leaked tupdesc refcount when the COMMIT destroys the original resource
owner, and then an error about the active resource owner not holding a
matching refcount when the expression is destroyed.
To fix, get rid of the need to have a shutdown callback at all, by
instead caching a pointer to the relevant typcache entry. Those
survive for the life of the backend, so we needn't worry about the
pointer becoming stale. (For registered RECORD types, we can still
cache a pointer to the tupdesc, knowing that it won't change for the
life of the backend.) This mechanism has been in use in plpgsql
and expandedrecord.c since commit 4b93f5799, and seems to work well.
This change requires modifying the ExprEvalStep structs used by the
relevant expression step types, which is slightly worrisome for
back-patching. However, there seems no good reason for extensions
to be familiar with the details of these particular sub-structs.
Per report from Rohit Bhogate. Back-patch to v11 where within-DO-block
COMMITs became a thing.
Discussion: https://postgr.es/m/CAAV6ZkQRCVBh8qAY+SZiHnz+U+FqAGBBDaDTjF2yiKa2nJSLKg@mail.gmail.com
heap_update needs to clear any existing "all visible" flag on
the old tuple's page (and on the new page too, if different).
Per coding rules, to do this it must acquire pin on the appropriate
visibility-map page while not holding exclusive buffer lock;
which creates a race condition since someone else could set the
flag whenever we're not holding the buffer lock. The code is
supposed to handle that by re-checking the flag after acquiring
buffer lock and retrying if it became set. However, one code
path through heap_update itself, as well as one in its subroutine
RelationGetBufferForTuple, failed to do this. The end result,
in the unlikely event that a concurrent VACUUM did set the flag
while we're transiently not holding lock, is a non-recurring
"PANIC: wrong buffer passed to visibilitymap_clear" failure.
This has been seen a few times in the buildfarm since recent VACUUM
changes that added code paths that could set the all-visible flag
while holding only exclusive buffer lock. Previously, the flag
was (usually?) set only after doing LockBufferForCleanup, which
would insist on buffer pin count zero, thus preventing the flag
from becoming set partway through heap_update. However, it's
clear that it's heap_update not VACUUM that's at fault here.
What's less clear is whether there is any hazard from these bugs
in released branches. heap_update is certainly violating API
expectations, but if there is no code path that can set all-visible
without a cleanup lock then it's only a latent bug. That's not
100% certain though, besides which we should worry about extensions
or future back-patch fixes that could introduce such code paths.
I chose to back-patch to v12. Fixing RelationGetBufferForTuple
before that would require also back-patching portions of older
fixes (notably 0d1fe9f74), which is more code churn than seems
prudent to fix a hypothetical issue.
Discussion: https://postgr.es/m/2247102.1618008027@sss.pgh.pa.us
With the Oracle Developer Studio 12.6 compiler, #line directives alter
the current source file location for purposes of #include "..."
directives. Hence, a VPATH build failed with 'cannot find include file:
"specscanner.c"'. With two exceptions, parser-containing directories
already add "-I. -I$(srcdir)"; eliminate the exceptions. Back-patch to
9.6 (all supported versions).
There are hacks in parse_coerce.c to push down a requested coercion
to below any CollateExpr that may appear. However, we did that even
if the requested data type is non-collatable, leading to an invalid
expression tree in which CollateExpr is applied to a non-collatable
type. The fix is just to drop the CollateExpr altogether, reasoning
that it's useless.
This bug is ten years old, dating to the original addition of
COLLATE support. The lack of field complaints suggests that there
aren't a lot of user-visible consequences. We noticed the problem
because it would trigger an assertion in DefineVirtualRelation if
the invalid structure appears as an output column of a view; however,
in a non-assert build, you don't see a crash just a (subtly incorrect)
complaint about applying collation to a non-collatable type. I found
that by putting the incorrect structure further down in a view, I could
make a view definition that would fail dump/reload, per the added
regression test case. But CollateExpr doesn't do anything at run-time,
so this likely doesn't lead to any really exciting consequences.
Per report from Yulin Pei. Back-patch to all supported branches.
Discussion: https://postgr.es/m/HK0PR01MB22744393C474D503E16C8509F4709@HK0PR01MB2274.apcprd01.prod.exchangelabs.com
Using Roman numbers (via "RM" or "rm") for a conversion to calculate a
number of months has never considered the case of negative numbers,
where a conversion could easily cause out-of-bound memory accesses. The
conversions in themselves were not completely consistent either, as
specifying 12 would result in NULL, but it should mean XII.
This commit reworks the conversion calculation to have a more
consistent behavior:
- If the number of months and years is 0, return NULL.
- If the number of months is positive, return the exact month number.
- If the number of months is negative, do a backward calculation, with
-1 meaning December, -2 November, etc.
Reported-by: Theodor Arsenij Larionov-Trichkin
Author: Julien Rouhaud
Discussion: https://postgr.es/m/16953-f255a18f8c51f1d5@postgresql.org
backpatch-through: 9.6
Comment fixes are applied on HEAD, and documentation improvements are
applied on back-branches where needed.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20210408164008.GJ6592@telsasoft.com
Backpatch-through: 9.6
The code in bringetbitmap() simply added the whole matching page range
to the TID bitmap, as determined by pages_per_range, even if some of the
pages were beyond the end of the heap. The query then might fail with
an error like this:
ERROR: could not open file "base/20176/20228.2" (target block
262144): previous segment is only 131021 blocks
In this case, the relation has 262093 pages (131072 and 131021 pages),
but we're trying to acess block 262144, i.e. first block of the 3rd
segment. At that point _mdfd_getseg() notices the preceding segment is
incomplete, and fails.
Hitting this in practice is rather unlikely, because:
* Most indexes use power-of-two ranges, so segments and page ranges
align perfectly (segment end is also a page range end).
* The table size has to be just right, with the last segment being
almost full - less than one page range from full segment, so that the
last page range actually crosses the segment boundary.
* Prefetch has to be enabled. The regular page access checks that
pages are not beyond heap end, but prefetch does not. On older
releases (before 12) the execution stops after hitting the first
non-existent page, so the prefetch distance has to be sufficient
to reach the first page in the next segment to trigger the issue.
Since 12 it's enough to just have prefetch enabled, the prefetch
distance does not matter.
Fixed by not adding non-existent pages to the TID bitmap. Backpatch
all the way back to 9.6 (BRIN indexes were introduced in 9.5, but that
release is EOL).
Backpatch-through: 9.6
Instead of writing a query to psql's stdin, which can cause a failure
where psql exits before writing, reporting a write failure with a broken
pipe, this changes the logic to use -c. This was not seen in the
buildfarm as no animals with a sensitive environment are running the
kerberos tests, but let's be safe.
HEAD is able to handle the situation as of 6d41dd0 for all the test
suites doing connection checks. f44b9b6 has fixed the same problem for
the LDAP tests.
Discussion: https://postgr.es/m/YGu7ceWAiSNQDgH5@paquier.xyz
Backpatch-through: 11
Tom Lane
David Rowley
Alexander Korotkov
Alvaro Herrera
Peter Eisentraut
Michael Paquier
Fujii Masao
Andrew Dunstan
Magnus Hagander
Noah Misch
Tomas Vondra