built-in procedures are named after the prosrc field of pg_proc (ie,
the actual C function name), not the proname field. This did not use
to make a difference back when the two were always the same, but in the
presence of overloaded proname values we'd best try to use the C name
instead. AFAICT this change affects no existing code, but it is
necessary to be able to get at some built-in functions that no macro
was being generated for before.
to 10, and be consistent about whether it counts the trailing null (it
does not). Also increase MAXDATELEN to be sure no buffer overflows are
caused by the longer MAXTZLEN.
key call sites are changed, but most called functions are still oldstyle.
An exception is that the PL managers are updated (so, for example, NULL
handling now behaves as expected in plperl and plpgsql functions).
NOTE initdb is forced due to added column in pg_proc.
Most (nearly all) of the work was done by David Wragg <dpw@doc.ic.ac.uk>
He patched 6.5.3. I've updated it for 7.0RC5.
It works for MIT kerberos 1.1.1 (and previously for 1.0.6 as well).
I've got the patch against 6.5.3, plus kerberized RPMS.
Mike Wyer <mw@doc.ic.ac.uk> || "Woof?"
other than the most common value in a column. We had had 0.5, make it
0.1 to make it more likely that an indexscan will be chosen. Really
need better statistics instead, but this should stem the bleeding
meanwhile ...
subsequent I/O attempts fail cleanly. I'm speculating about failure
scenarios in which we do pq_close, then something in a proc_exit routine
opens a file (re-using that kernel FD number), then something else
fails and tries to write an elog message to the frontend ... message
ends up in opened file, oops. No known examples of this but it seems
like a potential hole.
the oper field should be a valid Node structure so it can be dumped by
outfuncs.c without risk of coredump. (We had been using a raw pointer
to character string, which surely is NOT a valid Node.) This doesn't
cause any backwards compatibility problems for stored rules, since
raw unanalyzed parsetrees are never stored.
*last*, after all updating of system catalogs. In old code, an error
detected during TypeRename left the relation hosed. Also, add a call
to flush the relation's relcache entry, rather than trusting to shared
cache invalidation to flush it for us.
think that both sides of indexqual look like index keys. An example is
create table inside (f1 float8 primary key);
create table outside (g1 float8, g2 float8);
select * from inside,outside where f1 = atan2(g1+1, g2);
ERROR: ExecInitIndexScan: both left and right ops are rel-vars
(note that failure is potentially platform-dependent). Solution is a
cleanup I had had in mind to make anyway: functional index keys should
be represented as Var nodes in the fixed indexqual, just like regular
index keys.
it exists) before testing 'using namespace std'. This is necessary
on some C++ setups where the compiler won't take a 'using' until
you've included a header that mentions namespace std. (Pretty braindead
if you ask me, but...)
--with-includes) to makefiles for pltcl and plperl, so that these
switches will be used even though we do not want other top-level
CFLAGS. Ain't it fun trying to support multiple-compiler platforms?
project I am working on (Recall - a distributed, fault-tolerant,
replicated, storage framework @ http://www.fault-tolerant.org).
Recall is written in C++. I need to include the postgres headers and
there are some problems when including the headers w/C++.
Attached is a patch generated from postgres/src that fixes my problems.
I was hoping to get this into the main source. It's very small (2k) and
3 files are changed: backend/utils/fmgr/fmgr.c,
backend/utils/Gen_fmgrtab.sh.in, and include/access/tupdesc.h.
In C++, you get a multiply defined symbol because the variable
(FmgrInfo *fmgr_pl_finfo) is defined in the header (the patch moves it
to the .c file). The other problem in tupdesc.h is the use of typeid
is a problem in c++ (I renamed it to oidtypeid).
Thanks,
Neal Norwitz
some platforms --- and I also see that it is documented as not thread-
safe on HPUX and possibly other platforms. No good reason not to just
use IPPROTO_TCP constant from <netinet/in.h> instead.
really ought to fix relcache entry construction so that it does not
do so much with CurrentMemoryContext = CacheCxt. As is, relatively
harmless leaks in either sequential or index scanning translate to
permanent leaks if they occur when called from relcache build.
For the moment, however, the path of least resistance is to repair
all such leaks...
Hiroshi. ReleaseRelationBuffers now removes rel's buffers from pool,
instead of merely marking them nondirty. The old code would leave valid
buffers for a deleted relation, which didn't cause any known problems
but can't possibly be a good idea. There were several places which called
ReleaseRelationBuffers *and* FlushRelationBuffers, which is now
unnecessary; but there were others that did not. FlushRelationBuffers
no longer emits a warning notice if it finds dirty buffers to flush,
because with the current bufmgr behavior that's not an unexpected
condition. Also, FlushRelationBuffers will flush out all dirty buffers
for the relation regardless of block number. This ensures that
pg_upgrade's expectations are met about tuple on-row status bits being
up-to-date on disk. Lastly, tweak BufTableDelete() to clear the
buffer's tag so that no one can mistake it for being a still-valid
buffer for the page it once held. Formerly, the buffer would not be
found by buffer hashtable searches after BufTableDelete(), but it would
still be thought to belong to its old relation by the routines that
sequentially scan the shared-buffer array. Again I know of no bugs
caused by that, but it still can't be a good idea.
RowExclusive (my fault). Also, install a check to prevent people
from trying COPY BINARY to stdout/from stdin. No way that will
work unless we redesign the frontend COPY protocol ... which is
not worth the trouble in the near future ...
is in <string> and not in <string.h> on QNX4/egcs-2.91.60.
Probably this can be changed for all platforms. The test in line 1705 uses
<string> as well. Because I am not sure, I havn't this included into the
patch.
doc/Makefile has to be sligthly modified as it has been done for
src/backend/Makefile due to a QNX4 problem (patch attached)
Furthermore src/test/regress/run_check.sh needs to be patched as it has been
done for regress.sh (patch attached). Please note that in the patch the
postmaster is started always with the -i option.
run_check.sh reports the test "limit" as failed, but in reallity it is OK.
regress.sh reports it as OK.
Andreas Kardos
IRIX systems using the native compilers. A summary is:
- Various files use "//" as a comment delimiter in c files.
- Problems caused by assuming "char" is signed.
cash.in: building -signed the rules regression test fails as described
in FAQ_QNX4. If CHAR_MAX is "255U" then ((signed char)CHAR_MAX) is -1.
postmaster.c: random number regression test failed without this change.
- Some generic build issues and warning message cleanup.
David Kaelbling
just use the portable form,
tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz
There were a bunch of places that weren't paying attention to configure's
result anyway (including configure itself!?); clean them up too.
I'm including a diff of
postgresql-7.0/src/interfaces/jdbc/org/postgresql/jdbc2/ResultSet.java.
I've clearly marked all the fixes I did. Would *someone* who has access
to the cvs please put this in?
Joseph Shraibman
days. It seems to be a FAQ, and I think I know why. When creating a 'c'
language function, CREATE FUNCTION is fed the shared object filename,
and seems to succeed. Only when trying to use the function is an error
thrown, by which time the coder thinks something's wrong with executing
the code, not with loading it.
I think I once saw it proposed to load shared objects at function creation
time, but that idea was shot down on the grounds of resident memory bloat,
ISTR. Here's a patch for a compromise: all it does is stat() the file,
just like the loader code does, so that the errors caused by non existent
files, and no directory 'x' permissions (the most common ones, it seems),
get caught while the developer is still thinking about code loading. It
doesn't catch all errors (like the code not being readable by the postgres
user) but seems to catch the most common, without actually opening the file.
What do you think?
Ross
indexes, apparently, nor on functional indexes with more than one input
column (force of natts = 1 was in the wrong branch of IF statement).
Coredumped if source relation contained any uncommitted tuples, due to
failure to test for success return from heap_fetch. Fetched tuple
was passed directly to heap_insert, which clobbers the TID and commit
status in the tuple header it's given, which meant that the source
relation's tuples all got trashed as the copy proceeded. Abort partway
through, and you're left with a lot of missing tuples.
I wonder what else is lurking here ...
under FreeBSD ... basically, if setproctitle() exists, use it ...
the draw back right now is the PS_SET_STATUS stuff doesn't work, but am looking
into that one right now ... at lesat now you can see who is connecting where
and from where ...
mappings. In fact, it had them backward because it was using the 6.5.*
code. Copied them from parser/gram.y, so it is fixed now. Looks like
our first 7.0.1 fix. Oops, seems Tom has beat me to it as I was typing
this.
Rearrange handling of VACUUMs so that they are certain to be executed
as superuser not some random user; also, do not forget to vacuum
template1 itself.
pg_char_to_encoding() in multibyte disbaled case so that it does not
throw an error, rather return HARD CODED default value (currently SQL_ASCII).
This would solve the "non-mb backend vs. mb-enabled frontend" problem.
cleanup, ie, as soon as we have caught the longjmp. This ensures that
current context will be a valid context throughout error cleanup. Before
it was possible that current context was pointing at a context that would
get deleted during cleanup, leaving any subsequent pallocs in deep
trouble. I was able to provoke an Assert failure when compiled with
asserts + -DCLOBBER_FREED_MEMORY, if I did something that would cause
an error to be reported by the backend large-object code, because indeed
that code operates in a context that gets deleted partway through xact
abort --- and CurrentMemoryContext was still pointing at it! Boo hiss.
cases where joinclauses were present but some joins have to be made
by cartesian-product join anyway. An example is
SELECT * FROM a,b,c WHERE (a.f1 + b.f2 + c.f3) = 0;
Even though all the rels have joinclauses, we must join two of them
in cartesian style before we can use the join clause...
than BIND_DEFERRED. That way, if the loaded library has unresolved
references, shl_load fails cleanly. As we had it, shl_load would
succeed and then the dynlinker would call abort() when we try to call
into the loaded library. abort()ing a backend is uncool.
always failed if Perl makefile's INSTALLSITELIB variable was specified
in terms of another variable. Fix by adding an echo-installdir target
to the Perl makefile, which the upper-level Makefile can invoke.
