When 2dedf4d9 has integrated recovery.conf into postgresql.conf, it also
changed pg_basebackup -R in the way recovery configuration is
generated. However this implementation forgot the fact that
pg_basebackup needs to keep compatibility with older server versions as
well.
Reported-by: Devrim Gündüz
Author: Sergei Kornilov, Michael Paquier
Discussion: https://postgr.es/m/3458f7cd12d74acd90180a671c8d5a081d60e162.camel@gunduz.org
Commit c0d0e54084 replaced the ones in the documentation, but missed out
on the ones in the code. Replace those as well, but unlike c0d0e54084,
don't backpatch the code changes to avoid breaking translations.
At least as far back as the 2008 spec, POSIX has defined strsignal(3)
for looking up descriptive strings for signal numbers. We hadn't gotten
the word though, and were still using the crufty old sys_siglist array,
which is in no standard even though most Unixen provide it.
Aside from not being formally standards-compliant, this was just plain
ugly because it involved #ifdef's at every place using the code.
To eliminate the #ifdef's, create a portability function pg_strsignal,
which wraps strsignal(3) if available and otherwise falls back to
sys_siglist[] if available. The set of Unixen with neither API is
probably empty these days, but on any platform with neither, you'll
just get "unrecognized signal". All extant callers print the numeric
signal number too, so no need to work harder than that.
Along the way, upgrade pg_basebackup's child-error-exit reporting
to match the rest of the system.
Discussion: https://postgr.es/m/25758.1544983503@sss.pgh.pa.us
recovery.conf settings are now set in postgresql.conf (or other GUC
sources). Currently, all the affected settings are PGC_POSTMASTER;
this could be refined in the future case by case.
Recovery is now initiated by a file recovery.signal. Standby mode is
initiated by a file standby.signal. The standby_mode setting is
gone. If a recovery.conf file is found, an error is issued.
The trigger_file setting has been renamed to promote_trigger_file as
part of the move.
The documentation chapter "Recovery Configuration" has been integrated
into "Server Configuration".
pg_basebackup -R now appends settings to postgresql.auto.conf and
creates a standby.signal file.
Author: Fujii Masao <masao.fujii@gmail.com>
Author: Simon Riggs <simon@2ndquadrant.com>
Author: Abhijit Menon-Sen <ams@2ndquadrant.com>
Author: Sergei Kornilov <sk@zsrv.org>
Discussion: https://www.postgresql.org/message-id/flat/607741529606767@web3g.yandex.ru/
This is useful to know when the data copy has been finished. The
current situation can be confusing for users as the last message is
"waiting for background process to finish streaming", so it looks like
this is taking time but the final sync is instead.
Author: Jeff Janes
Discussion: https://postgr.es/m/CAMkU=1ypeoMJ=tFBG8vP13sxEtXd4Pm_x1SqsJdW_RvzpcvN=A@mail.gmail.com
Allow the cluster to be optionally init'd with read access for the
group.
This means a relatively non-privileged user can perform a backup of the
cluster without requiring write privileges, which enhances security.
The mode of PGDATA is used to determine whether group permissions are
enabled for directory and file creates. This method was chosen as it's
simple and works well for the various utilities that write into PGDATA.
Changing the mode of PGDATA manually will not automatically change the
mode of all the files contained therein. If the user would like to
enable group access on an existing cluster then changing the mode of all
the existing files will be required. Note that pg_upgrade will
automatically change the mode of all migrated files if the new cluster
is init'd with the -g option.
Tests are included for the backend and all the utilities which operate
on the PG data directory to ensure that the correct mode is set based on
the data directory permissions.
Author: David Steele <david@pgmasters.net>
Reviewed-By: Michael Paquier, with discussion amongst many others.
Discussion: https://postgr.es/m/ad346fe6-b23e-59f1-ecb7-0e08390ad629%40pgmasters.net
Consolidate directory and file create permissions for tools which work
with the PG data directory by adding a new module (common/file_perm.c)
that contains variables (pg_file_create_mode, pg_dir_create_mode) and
constants to initialize them (0600 for files and 0700 for directories).
Convert mkdir() calls in the backend to MakePGDirectory() if the
original call used default permissions (always the case for regular PG
directories).
Add tests to make sure permissions in PGDATA are set correctly by the
tools which modify the PG data directory.
Authors: David Steele <david@pgmasters.net>,
Adam Brightwell <adam.brightwell@crunchydata.com>
Reviewed-By: Michael Paquier, with discussion amongst many others.
Discussion: https://postgr.es/m/ad346fe6-b23e-59f1-ecb7-0e08390ad629%40pgmasters.net
When base backups are run over the replication protocol (for example
using pg_basebackup), verify the checksums of all data blocks if
checksums are enabled. If checksum failures are encountered, log them
as warnings but don't abort the backup.
This becomes the default behaviour in pg_basebackup (provided checksums
are enabled on the server), so add a switch (-k) to disable the checks
if necessary.
Author: Michael Banck
Reviewed-By: Magnus Hagander, David Steele
Discussion: https://postgr.es/m/20180228180856.GE13784@nighthawk.caipicrew.dd-dns.de
The progress messages print out \r to keep overwriting the same line on
the screen. But this does not yield useful results when writing the
output to a file. So in that case, print out \n instead.
Author: Martín Marqués <martin@2ndquadrant.com>
Reviewed-by: Arthur Zakirov <a.zakirov@postgrespro.ru>
Doing this suppresses Coverity warnings and might allow improved
code in some cases. The prospects of that are not so bright as
to warrant back-patching, though.
Michael Paquier, per Coverity
A candidate path needs to be canonicalized before being checked against
the mappings, because the mappings are also canonicalized. This is
especially relevant on Windows
Reported-by: nb <nbedxp@gmail.com>
Author: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: Ashutosh Sharma <ashu.coek88@gmail.com>
When requesting a particular replication slot, the new pg_basebackup
option -C/--create-slot creates it before starting to replicate from it.
Further refactor the slot creation logic to include the temporary slot
creation logic into the same function. Add new arguments is_temporary
and preserve_wal to CreateReplicationSlot(). Print in --verbose mode
that a slot has been created.
Author: Michael Banck <michael.banck@credativ.de>
The --slot option somehow ended up under options controlling the output,
and some other options were in a nonsensical place or were not moved
after recent renamings, so tidy all that up a bit.
For performance reasons a larger segment size than the default 16MB
can be useful. A larger segment size has two main benefits: Firstly,
in setups using archiving, it makes it easier to write scripts that
can keep up with higher amounts of WAL, secondly, the WAL has to be
written and synced to disk less frequently.
But at the same time large segment size are disadvantageous for
smaller databases. So far the segment size had to be configured at
compile time, often making it unrealistic to choose one fitting to a
particularly load. Therefore change it to a initdb time setting.
This includes a breaking changes to the xlogreader.h API, which now
requires the current segment size to be configured. For that and
similar reasons a number of binaries had to be taught how to recognize
the current segment size.
Author: Beena Emerson, editorialized by Andres Freund
Reviewed-By: Andres Freund, David Steele, Kuntal Ghosh, Michael
Paquier, Peter Eisentraut, Robert Hass, Tushar Ahuja
Discussion: https://postgr.es/m/CAOG9ApEAcQ--1ieKbhFzXSQPw_YLmepaa4hNdnY5+ZULpt81Mw@mail.gmail.com
When writing a backup to stdout with pg_basebackup on Windows, put stdout
to binary mode. Any CR bytes in the output will otherwise be output
incorrectly as CR+LF.
In the passing, standardize on using "_setmode" instead of "setmode", for
the sake of consistency. They both do the same thing, but according to
MSDN documentation, setmode is deprecated.
Fixes bug #14634, reported by Henry Boehlert. Patch by Haribabu Kommi.
Backpatch to all supported versions.
Discussion: https://www.postgresql.org/message-id/20170428082818.24366.13134@wrigleys.postgresql.org
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Using the client pid can easily be non-unique when used on different
hosts. Using the backend pid should be guaranteed unique, since the
temporary slot gets removed when the client disconnects so it will be
gone even if the pid is renewed.
Reported by Ludovic Vaugeois-Pepin
Partially revert commit c079673dcb.
There were complaints that splitting switch descriptions would
complicate translation efforts. There are probably ways to resolve
the formatting problem without doing that, but undo it while we're
discussing.
Reformat various places in which pgindent will make a mess, and
fix a few small violations of coding style that I happened to notice
while perusing the diffs from a pgindent dry run.
There is one actual bug fix here: the need-to-enlarge-the-buffer code
path in icu_convert_case was obviously broken. Perhaps it's unreachable
in our usage? Or maybe this is just sadly undertested.
pg_basebackup's child process did not pay any attention to the pipe
from its parent while waiting for input from the source server.
If no server data was arriving, it would only wake up and check the
pipe every standby_message_timeout or so. This creates a problem
since the parent process might determine and send the desired stop
position only after the server has reached end-of-WAL and stopped
sending data. In the src/test/recovery regression tests, the timing
is repeatably such that it takes nearly 10 seconds for the child
process to realize that it should shut down. It's not clear how
often that would happen in real-world cases, but it sure seems like
a bug --- and if the user turns off standby_message_timeout or sets
it very large, the delay could be a lot worse.
To fix, expand the StreamCtl API to allow the pipe input FD to be
passed down to the low-level wait routine, and watch both sockets
when sleeping.
(Note: AFAICS this issue doesn't affect the Windows port, since
it doesn't rely on a pipe to transfer the stop position to the
child thread.)
Discussion: https://postgr.es/m/6456.1493263884@sss.pgh.pa.us
When reporting progress, make the "waiting for checkpoint" test be
overwritten by the file-based progress once it's completed. This is more
consistent with how we report the rest of the progress.
Suggested by Jeff Janes
Output a message about checkpoint starting in verbose mode of
pg_basebackup, and make the documentation state more clearly that this
happens.
Author: Michael Banck
c.h #includes a number of core libc header files, such as <stdio.h>.
There's no point in re-including these after having read postgres.h,
postgres_fe.h, or c.h; so remove code that did so.
While at it, also fix some places that were ignoring our standard pattern
of "include postgres[_fe].h, then system header files, then other Postgres
header files". While there's not any great magic in doing it that way
rather than system headers last, it's silly to have just a few files
deviating from the general pattern. (But I didn't attempt to enforce this
globally, only in files I was touching anyway.)
I'd be the first to say that this is mostly compulsive neatnik-ism,
but over time it might save enough compile cycles to be useful.
The recovery.conf file that's generated is specifically for replication,
and not needed (or wanted) for regular backup restore, so indicate that
in the message.
Temporary replication slots will be used by default when wal streaming
is used and no slot name is specified with -S. If a slot name is
specified, then a permanent slot with that name is used. If --no-slot is
specified, then no permanent or temporary slot will be used.
Temporary slots are only used on 10.0 and newer, of course.
Since streaming is now supported for all output formats, make this the
default as this is what most people want.
To get the old behavior, the parameter -X none can be specified to turn
it off.
This also removes the parameter -x for fetch, now requiring -X fetch to
be specified to use that.
Reviewed by Vladimir Rusinov, Michael Paquier and Simon Riggs
Commit 56c7d8d455 allowed pg_basebackup
to stream WAL in tar mode. But there is the restriction that WAL
streaming in tar mode works only when the value - (dash) is not
specified as output directory. This means that the combination of
three options "-D -", "-F t" and "-X stream" is invalid. However,
previously, even when those options were specified at the same time,
pg_basebackup background process unexpectedly started streaming WAL.
And then it exited with an error.
This commit changes pg_basebackup so that it errors out on such
invalid combination of options at the beginning.
Reviewed by Magnus Hagander, and patch by me.
