The check to test whether the subscription workers were restarting after a
change in the subscription was failing. The reason was that the test was
assuming the walsender started before it reaches the 'streaming' state and
the walsender was exiting due to an error before that. Now, the walsender
was erroring out before reaching the 'streaming' state because it tries to
acquire the slot before the previous walsender has exited.
In passing, improve the die messages so that it is easier to investigate
the failures in the future if any.
Reported-by: Michael Paquier, as per buildfarm
Author: Ajin Cherian
Reviewed-by: Masahiko Sawada, Amit Kapila
Backpatch-through: 10, where this test was introduced
Discussion: https://postgr.es/m/YRnhFxa9bo73wfpV@paquier.xyz
For no particularly good reason, getPolicies() queried pg_policy
separately for each table. We can collect all the policies in
a single query instead, and attach them to the correct TableInfo
objects using findTableByOid() lookups. On the regression
database, this reduces the number of queries substantially, and
provides a visible savings even when running against a local
server.
Per complaint from Hubert Depesz Lubaczewski. Since this is such
a simple fix and can have a visible performance benefit, back-patch
to all supported branches.
Discussion: https://postgr.es/m/20210826084430.GA26282@depesz.com
There's long been a "TODO: there might be some value in caching
the results" annotation on pg_dump's getFormattedTypeName function;
but we hadn't gotten around to checking what it was costing us to
repetitively look up type names. It turns out that when dumping the
current regression database, about 10% of the total number of queries
issued are duplicative format_type() queries. However, Hubert Depesz
Lubaczewski reported a not-unusual case where these account for over
half of the queries issued by pg_dump. Individually these queries
aren't expensive, but when network lag is a factor, they add up to a
problem. We can very easily add some caching to getFormattedTypeName
to solve it.
Since this is such a simple fix and can have a visible performance
benefit, back-patch to all supported branches.
Discussion: https://postgr.es/m/20210826084430.GA26282@depesz.com
Commit 5be8ce82e8 added a new role to the stats_ext regression suite,
but the role name did not start with regress_ causing failures when
running with ENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS. Fixed by
renaming the role to start with the expected regress_ prefix.
Backpatch-through: 10, same as the new regression test
Discussion: https://postgr.es/m/1F238937-7CC2-4703-A1B1-6DC225B8978A%40enterprisedb.com
When an ownership check on extended statistics object failed, the code
was calling aclcheck_error_type to report the failure, which is clearly
wrong, resulting in cache lookup errors. Fix by calling aclcheck_error.
This issue exists since the introduction of extended statistics, so
backpatch all the way back to PostgreSQL 10. It went unnoticed because
there were no tests triggering the error, so add one.
Reported-by: Mark Dilger
Backpatch-through: 10, where extended stats were introduced
Discussion: https://postgr.es/m/1F238937-7CC2-4703-A1B1-6DC225B8978A%40enterprisedb.com
Most data-corruption reports mention the location of the problem, but
this one failed to. Add it.
Backpatch all the way back. In 12 and older, also assign the
ERRCODE_DATA_CORRUPTED error code as was done in commit fd6ec93bf8 for
13 and later.
Discussion: https://postgr.es/m/202108191637.oqyzrdtnheir@alvherre.pgsql
Strictly speaking this isn't a bug, but since all references to catalog
objects are schema-qualified, we might as well be consistent. The
omission first appeared in commit 1c5d9270e3, so backpatch to 12.
Author: Justin Pryzby <pryzbyj@telsasoft.com>
Discussion: https://postgr.es/m/20210827193151.GN26465@telsasoft.com
If the system crashed between CREATE TABLESPACE and the next checkpoint,
the result could be some files in the tablespace unexpectedly containing
no rows. Affected files would be those for which the system did not
write WAL; see the wal_skip_threshold documentation. Before v13, a
different set of conditions governed the writing of WAL; see v12's
<sect2 id="populate-pitr">. (The v12 conditions were broader in some
ways and narrower in others.) Users may want to audit non-default
tablespaces for unexpected short files. The bug could have truncated an
index without affecting the associated table, and reindexing the index
would fix that particular problem.
This fixes the bug by making create_tablespace_directories() more like
TablespaceCreateDbspace(). create_tablespace_directories() was
recursively removing tablespace contents, reasoning that WAL redo would
recreate everything removed that way. That assumption holds for other
wal_level values. Under wal_level=minimal, the old approach could
delete files for which no other copy existed. Back-patch to 9.6 (all
supported versions).
Reviewed by Robert Haas and Prabhat Sahu. Reported by Robert Haas.
Discussion: https://postgr.es/m/CA+TgmoaLO9ncuwvr2nN-J4VEP5XyAcy=zKiHxQzBbFRxxGxm0w@mail.gmail.com
Somehow, spgist overlooked the need to call pgstat_count_index_scan().
Hence, pg_stat_all_indexes.idx_scan and equivalent columns never
became nonzero for an SP-GiST index, although the related per-tuple
counters worked fine.
This fix works a bit differently from other index AMs, in that the
counter increment occurs in spgrescan not spggettuple/spggetbitmap.
It looks like this won't make the user-visible semantics noticeably
different, so I won't go to the trouble of introducing an is-this-
the-first-call flag just to make the counter bumps happen in the
same places.
Per bug #17163 from Christian Quest. Back-patch to all supported
versions.
Discussion: https://postgr.es/m/17163-b8c5cc88322a5e92@postgresql.org
Pengchengliu reported an assertion failure in a parallel woker while
performing a parallel scan using an overflowed snapshot. The proximate
cause is that TransactionXmin was set to an incorrect value. The
underlying cause is incorrect snapshot handling in parallel.c.
In particular, InitializeParallelDSM() was unconditionally calling
GetTransactionSnapshot(), because I (rhaas) mistakenly thought that
was always retrieving an existing snapshot whereas, at isolation
levels less than REPEATABLE READ, it's actually taking a new one. So
instead do this only at higher isolation levels where there actually
is a single snapshot for the whole transaction.
By itself, this is not a sufficient fix, because we still need to
guarantee that TransactionXmin gets set properly in the workers. The
easiest way to do that seems to be to install the leader's active
snapshot as the transaction snapshot if the leader did not serialize a
transaction snapshot. This doesn't affect the results of future
GetTrasnactionSnapshot() calls since those have to take a new snapshot
anyway; what we care about is the side effect of setting TransactionXmin.
Report by Pengchengliu. Patch by Greg Nancarrow, except for some comment
text which I supplied.
Discussion: https://postgr.es/m/002f01d748ac$eaa781a0$bff684e0$@tju.edu.cn
Commit 325f2ec555 introduced pg_class.relwrite to skip operations on
tables created as part of a heap rewrite during DDL. It links such
transient heaps to the original relation OID via this new field in
pg_class but forgot to do anything about toast tables. So, logical
decoding was not able to skip operations on internally created toast
tables. This leads to an error when we tried to decode the WAL for the
next operation for which it appeared that there is a toast data where
actually it didn't have any toast data.
To fix this, we set pg_class.relwrite for internally created toast tables
as well which allowed skipping operations on them during logical decoding.
Author: Bertrand Drouvot
Reviewed-by: David Zhang, Amit Kapila
Backpatch-through: 11, where it was introduced
Discussion: https://postgr.es/m/b5146fb1-ad9e-7d6e-f980-98ed68744a7c@amazon.com
There are two identical error messages about valid value of modulus for
hash partition, in PostgreSQL source code. Commit 0e1275fb07 improved
only one of them so that ambiguous word "positive" was avoided there,
and forgot to improve the other. This commit improves the other.
Which would reduce translator burden.
Back-pach to v11 where the error message exists.
Author: Kyotaro Horiguchi
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/20210819.170315.1413060634876301811.horikyota.ntt@gmail.com
The distance in phrase operator must be an integer value between zero
and MAXENTRYPOS inclusive. But previously the error message about
its valid value included the information about its upper limit
but not lower limit (i.e., zero). This commit improves the error message
so that it also includes the information about its lower limit.
Back-patch to v9.6 where full-text phrase search was supported.
Author: Kyotaro Horiguchi
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/20210819.170315.1413060634876301811.horikyota.ntt@gmail.com
Regexps like "(.){0}...\1" drew an "invalid backreference number".
That's not unreasonable on its face, since the capture group will
never be matched if it's iterated zero times. However, other engines
such as Perl's don't complain about this, nor do we throw an error for
related cases such as "(.)|\1", even though that backref can never
succeed either. Also, if the zero-iterations case happens at runtime
rather than compile time --- say, "(x)*...\1" when there's no "x" to
be found --- that's not an error, we just deem the backref to not
match. Making this even less defensible, no error was thrown for
nested cases such as "((.)){0}...\2"; and to add insult to injury,
those cases could result in assertion failures instead. (It seems
that nothing especially bad happened in non-assert builds, though.)
Let's just fix it so that no error is thrown and instead the backref
is deemed to never match, so that compile-time detection of no
iterations behaves the same as run-time detection.
Per report from Mark Dilger. This appears to be an aboriginal error
in Spencer's library, so back-patch to all supported versions.
Pre-v14, it turns out to also be necessary to back-patch one aspect of
commits cb76fbd7e/00116dee5, namely to create capture-node subREs with
the begin/end states of their subexpressions, not the current lp/rp
of the outer parseqatom invocation. Otherwise delsub complains that
we're trying to disconnect a state from itself. This is a bit scary
but code examination shows that it's safe: in the pre-v14 code, if we
want to wrap iteration around the subexpression, the first thing we do
is overwrite the atom's begin/end fields with new states. So the
bogus values didn't survive long enough to be used for anything, except
if no iteration is required, in which case it doesn't matter.
Discussion: https://postgr.es/m/A099E4A8-4377-4C64-A98C-3DEDDC075502@enterprisedb.com
The recursion in cdissect() was careless about clearing match data
for capturing parentheses after rejecting a partial match. This
could allow a later back-reference to succeed when by rights it
should fail for lack of a defined referent.
To fix, think a little more rigorously about what the contract
between different levels of cdissect's recursion needs to be.
With the right spec, we can fix this using fewer rather than more
resets of the match data; the key decision being that a failed
sub-match is now explicitly responsible for clearing any matches
it may have set.
There are enough other cross-checks and optimizations in the code
that it's not especially easy to exhibit this problem; usually, the
match will fail as-expected. Plus, regexps that are even potentially
vulnerable are most likely user errors, since there's just not much
point in writing a back-ref that doesn't always have a referent.
These facts perhaps explain why the issue hasn't been detected,
even though it's almost certainly a couple of decades old.
Discussion: https://postgr.es/m/151435.1629733387@sss.pgh.pa.us
WAL records may span multiple segments, but XLogWrite() does not
wait for the entire record to be written out to disk before
creating archive status files. Instead, as soon as the last WAL page of
the segment is written, the archive status file is created, and the
archiver may process it. If PostgreSQL crashes before it is able to
write and flush the rest of the record (in the next WAL segment), the
wrong version of the first segment file lingers in the archive, which
causes operations such as point-in-time restores to fail.
To fix this, keep track of records that span across segments and ensure
that segments are only marked ready-for-archival once such records have
been completely written to disk.
This has always been wrong, so backpatch all the way back.
Author: Nathan Bossart <bossartn@amazon.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Ryo Matsumura <matsumura.ryo@fujitsu.com>
Reviewed-by: Andrey Borodin <x4mmm@yandex-team.ru>
Discussion: https://postgr.es/m/CBDDFA01-6E40-46BB-9F98-9340F4379505@amazon.com
In a backup manifest, WAL-Ranges stores the range of WAL that is
required for the backup to be valid. pg_verifybackup would then
internally use pg_waldump for the checks based on this data.
When the timeline where the backup started was more than 1 with a
history file looked at for the manifest data generation, the calculation
of the WAL range for the first timeline to check was incorrect. The
previous logic used as start LSN the start position of the first
timeline, but it needs to use the start LSN of the backup. This would
cause failures with pg_verifybackup, or any tools making use of the
backup manifests.
This commit adds a test based on a logic using a self-promoted node,
making it rather cheap.
Author: Kyotaro Horiguchi
Discussion: https://postgr.es/m/20210818.143031.1867083699202617521.horikyota.ntt@gmail.com
Backpatch-through: 13
After detecting a sub-match "dissect" failure (i.e., a backref match
failure) in the i'th sub-match of an iteration node, we should proceed
by adjusting the attempted length of the i'th submatch. As coded,
though, these functions changed the attempted length of the *last*
sub-match, and only after exhausting all possibilities for that would
they back up to adjust the next-to-last sub-match, and then the
second-from-last, etc; all of which is wasted effort, since only
changing the start or length of the i'th sub-match can possibly make
it succeed. This oversight creates the possibility for exponentially
bad performance. Fortunately the problem is masked in most cases by
optimizations or constraints applied elsewhere; which explains why
we'd not noticed it before. But it is possible to reach the problem
with fairly simple, if contrived, regexps.
Oversight in my commit 173e29aa5. That's pretty ancient now,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/1808998.1629412269@sss.pgh.pa.us
transformLockingClause neglected to exclude the pseudo-RTEs for
OLD/NEW when processing a rule's query. This led to odd errors
or even crashes later on. This bug is very ancient, but it's
not terribly surprising that nobody noticed, since the use-case
for SELECT FOR UPDATE in a non-view rule is somewhere between
thin and non-existent. Still, crashing is not OK.
Per bug #17151 from Zhiyong Wu. Thanks to Masahiko Sawada
for analysis of the problem.
Discussion: https://postgr.es/m/17151-c03a3e6e4ec9aadb@postgresql.org
Recursion into the FILTER clause was mis-implemented, such that a
relevant Var or Aggref at the very top of the FILTER clause would
be ignored. (Of course, that'd have to be a plain boolean Var or
boolean-returning aggregate.) The consequence would be
mis-identification of the correct semantic level of the aggregate,
which could lead to not-per-spec query behavior. If the FILTER
expression is an aggregate, this could also lead to failure to issue
an expected "aggregate function calls cannot be nested" error, which
would likely result in a core dump later on, since the planner and
executor aren't expecting such cases to appear.
The root cause is that commit b560ec1b0 blindly copied some code
that assumed it's recursing into a List, and thus didn't examine the
top-level node. To forestall questions about why this call doesn't
look like the others, as well as possible future copy-and-paste
mistakes, let's change all three check_agg_arguments_walker calls in
check_agg_arguments, even though only the one for the filter clause
is really broken.
Per bug #17152 from Zhiyong Wu. This has been wrong since we
implemented FILTER, so back-patch to all supported versions.
(Testing suggests that pre-v11 branches manage to avoid crashing
in the bad-Aggref case, thanks to "redundant" checks in ExecInitAgg.
But I'm not sure how thorough that protection is, and anyway the
wrong-behavior issue remains, so fix 9.6 and 10 too.)
Discussion: https://postgr.es/m/17152-c7f906cc1a88e61b@postgresql.org
If recordDependencyOnCurrentExtension is invoked on a pre-existing,
free-standing object during an extension update script, that object
will become owned by the extension. In our current code this is
possible in three cases:
* Replacing a "shell" type or operator.
* CREATE OR REPLACE overwriting an existing object.
* ALTER TYPE SET, ALTER DOMAIN SET, and ALTER OPERATOR SET.
The first of these cases is intentional behavior, as noted by the
existing comments for GenerateTypeDependencies. It seems like
appropriate behavior for CREATE OR REPLACE too; at least, the obvious
alternatives are not better. However, the fact that it happens during
ALTER is an artifact of trying to share code (GenerateTypeDependencies
and makeOperatorDependencies) between the CREATE and ALTER cases.
Since an extension script would be unlikely to ALTER an object that
didn't already belong to the extension, this behavior is not very
troubling for the direct target object ... but ALTER TYPE SET will
recurse to dependent domains, and it is very uncool for those to
become owned by the extension if they were not already.
Let's fix this by redefining the ALTER cases to never change extension
membership, full stop. We could minimize the behavioral change by
only changing the behavior when ALTER TYPE SET is recursing to a
domain, but that would complicate the code and it does not seem like
a better definition.
Per bug #17144 from Alex Kozhemyakin. Back-patch to v13 where ALTER
TYPE SET was added. (The other cases are older, but since they only
affect the directly-named object, there's not enough of a problem to
justify changing the behavior further back.)
Discussion: https://postgr.es/m/17144-e67d7a8f049de9af@postgresql.org
In OpenSSL there are two types of BIO's (I/O abstractions):
source/sink and filters. A source/sink BIO is a source and/or
sink of data, ie one acting on a socket or a file. A filter
BIO takes a stream of input from another BIO and transforms it.
In order for BIO_find_type() to be able to traverse the chain
of BIO's and correctly find all BIO's of a certain type they
shall have the type bit set accordingly, source/sink BIO's
(what PostgreSQL implements) use BIO_TYPE_SOURCE_SINK and
filter BIO's use BIO_TYPE_FILTER. In addition to these, file
descriptor based BIO's should have the descriptor bit set,
BIO_TYPE_DESCRIPTOR.
The PostgreSQL implementation didn't set the type bits, which
went unnoticed for a long time as it's only really relevant
for code auditing the OpenSSL installation, or doing similar
tasks. It is required by the API though, so this fixes it.
Backpatch through 9.6 as this has been wrong for a long time.
Author: Itamar Gafni
Discussion: https://postgr.es/m/SN6PR06MB39665EC10C34BB20956AE4578AF39@SN6PR06MB3966.namprd06.prod.outlook.com
Backpatch-through: 9.6
This commit ensures that the wait interval in the replay delay loop
waiting for an amount of time defined by recovery_min_apply_delay is
correctly handled on reload, recalculating the delay if this GUC value
is updated, based on the timestamp of the commit record being replayed.
The previous behavior would be problematic for example with replay
still waiting even if the delay got reduced or just cancelled. If the
apply delay was increased to a larger value, the wait would have just
respected the old value set, finishing earlier.
Author: Soumyadeep Chakraborty, Ashwin Agrawal
Reviewed-by: Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/CAE-ML+93zfr-HLN8OuxF0BjpWJ17O5dv1eMvSE5jsj9jpnAXZA@mail.gmail.com
Backpatch-through: 9.6
Like the ARM case, just use gcc's __sync_lock_test_and_set();
that will compile into AMOSWAP.W.AQ which does what we need.
At some point it might be worth doing some work on atomic ops
for RISC-V, but this should be enough for a creditable port.
Back-patch to all supported branches, just in case somebody
wants to try them on RISC-V.
Marek Szuba
Discussion: https://postgr.es/m/dea97b6d-f55f-1f6d-9109-504aa7dfa421@gentoo.org
This fixes a bug in simplehash.h which caused an incorrect size mask to be
used when the hash table grew to SH_MAX_SIZE (2^32). The code was
incorrectly setting the size mask to 0 when the hash tables reached the
maximum possible number of buckets. This would result always trying to
use the 0th bucket causing an infinite loop of trying to grow the hash
table due to there being too many collisions.
Seemingly it's not that common for simplehash tables to ever grow this big
as this bug dates back to v10 and nobody seems to have noticed it before.
However, probably the most likely place that people would notice it would
be doing a large in-memory Hash Aggregate with something close to at least
2^31 groups.
After this fix, the code now works correctly with up to within 98% of 2^32
groups and will fail with the following error when trying to insert any
more items into the hash table:
ERROR: hash table size exceeded
However, the work_mem (or hash_mem_multiplier in newer versions) settings
will generally cause Hash Aggregates to spill to disk long before reaching
that many groups. The minimal test case I did took a work_mem setting of
over 192GB to hit the bug.
simplehash hash tables are used in a few other places such as Bitmap Index
Scans, however, again the size that the hash table can become there is
also limited to work_mem and it would take a relation of around 16TB
(2^31) pages and a very large work_mem setting to hit this. With smaller
work_mem values the table would become lossy and never grow large enough
to hit the problem.
Author: Yura Sokolov
Reviewed-by: David Rowley, Ranier Vilela
Discussion: https://postgr.es/m/b1f7f32737c3438136f64b26f4852b96@postgrespro.ru
Backpatch-through: 10, where simplehash.h was added
It's hard to disable ASLR on current macOS releases, for testing with
-DEXEC_BACKEND. You could already set the environment variable
PG_SHMEM_ADDR to something not likely to collide with mappings created
earlier in process startup. Let's also provide a default value that
works on current releases and architectures, for developer convenience.
As noted in the pre-existing comment, this is a horrible hack, but
-DEXEC_BACKEND is only used by Unix-based PostgreSQL developers for
testing some otherwise Windows-only code paths, so it seems excusable.
Back-patch to all supported branches.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20210806032944.m4tz7j2w47mant26%40alap3.anarazel.de
As a result of confusion about whether the "char" type is signed or
unsigned, scans for index searches like "col < 'x'" or "col <= 'x'"
would start at the middle of the index not the left end, thus missing
many or all of the entries they should find. Fortunately, this
is not a symptom of index corruption. It's only the search logic
that is broken, and we can fix it without unpleasant side-effects.
Per report from Jason Kim. This has been wrong since btree_gin's
beginning, so back-patch to all supported branches.
Discussion: https://postgr.es/m/20210810001649.htnltbh7c63re42p@jasonk.me
In ec34040af I added a mention that there was no point in setting
maintenance_work_limit to anything higher than 1GB for vacuum, but that
was incorrect as ginInsertCleanup() also looks at what
maintenance_work_mem is set to during VACUUM and that's not limited to
1GB.
Here I attempt to make it more clear that the limitation is only around
the number of dead tuple identifiers that we can collect during VACUUM.
I've also added a note to autovacuum_work_mem to mention this limitation.
I didn't do that in ec34040af as I'd had some wrong-headed ideas about
just limiting the maximum value for that GUC to 1GB.
Author: David Rowley
Discussion: https://postgr.es/m/CAApHDvpGwOAvunp-E-bN_rbAs3hmxMoasm5pzkYDbf36h73s7w@mail.gmail.com
Backpatch-through: 9.6, same as ec34040af
Since commit e462856a7a, pg_upgrade automatically creates a script to
update extensions, so mention that instead of ALTER EXTENSION.
Backpatch-through: 9.6
Copy-and-pasteo in 665c5855e, evidently. The 9.6 docs toolchain
whined about duplicate index entries, though our modern toolchain
doesn't. In any case, these GUCs surely are not about the
default settings of these values.
Rather than trying to pick table aliases that won't conflict with
any possible user-defined matview column name, adjust the queries'
syntax so that the aliases are only used in places where they can't be
mistaken for column names. Mostly this consists of writing "alias.*"
not just "alias", which adds clarity for humans as well as machines.
We do have the issue that "SELECT alias.*" acts differently from
"SELECT alias", but we can use the same hack ruleutils.c uses for
whole-row variables in SELECT lists: write "alias.*::compositetype".
We might as well revert to the original aliases after doing this;
they're a bit easier to read.
Like 75d66d10e, back-patch to all supported branches.
Discussion: https://postgr.es/m/2488325.1628261320@sss.pgh.pa.us
Formerly, the numeric code tested whether an integer value of a larger
type would fit in a smaller type by casting it to the smaller type and
then testing if the reverse conversion produced the original value.
That's perfectly fine, except that it caused a test failure on
buildfarm animal castoroides, most likely due to a compiler bug.
Instead, do these tests by comparing against PG_INT16/32_MIN/MAX. That
matches existing code in other places, such as int84(), which is more
widely tested, and so is less likely to go wrong.
While at it, add regression tests covering the numeric-to-int8/4/2
conversions, and adjust the recently added tests to the style of
434ddfb79a (on the v11 branch) to make failures easier to diagnose.
Per buildfarm via Tom Lane, reviewed by Tom Lane.
Discussion: https://postgr.es/m/2394813.1628179479%40sss.pgh.pa.us
postgres_fdw imported generated columns from the remote tables as plain
columns, and caused failures like "ERROR: cannot insert a non-DEFAULT
value into column "foo"" when inserting into the foreign tables, as it
tried to insert values into the generated columns. To fix, we do the
following under the assumption that generated columns in a postgres_fdw
foreign table are defined so that they represent generated columns in
the underlying remote table:
* Send DEFAULT for the generated columns to the foreign server on insert
or update, not generated column values computed on the local server.
* Add to postgresImportForeignSchema() an option "import_generated" to
include column generated expressions in the definitions of foreign
tables imported from a foreign server. The option is true by default.
The assumption seems reasonable, because that would make a query of the
postgres_fdw foreign table return values for the generated columns that
are consistent with the generated expression.
While here, fix another issue in postgresImportForeignSchema(): it tried
to include column generated expressions as column default expressions in
the foreign table definitions when the import_default option was enabled.
Per bug #16631 from Daniel Cherniy. Back-patch to v12 where generated
columns were added.
Discussion: https://postgr.es/m/16631-e929fe9db0ffc7cf%40postgresql.org
This fixes a long-standing bug when using to_char() to format a
numeric value in scientific notation -- if the value's exponent is
less than -NUMERIC_MAX_DISPLAY_SCALE-1 (-1001), it produced a
division-by-zero error.
The reason for this error was that get_str_from_var_sci() divides its
input by 10^exp, which it produced using power_var_int(). However, the
underflow test in power_var_int() causes it to return zero if the
result scale is too small. That's not a problem for power_var_int()'s
only other caller, power_var(), since that limits the rscale to 1000,
but in get_str_from_var_sci() the exponent can be much smaller,
requiring a much larger rscale. Fix by introducing a new function to
compute 10^exp directly, with no rscale limit. This also allows 10^exp
to be computed more efficiently, without any numeric multiplication,
division or rounding.
Discussion: https://postgr.es/m/CAEZATCWhojfH4whaqgUKBe8D5jNHB8ytzemL-PnRx+KCTyMXmg@mail.gmail.com
As of commit 84f5c2908, executing SQL commands (via SPI or otherwise)
requires having either an active Portal, or a caller-established
active snapshot. We were simply Assert'ing that that's the case.
But we've now had a couple different reports of people testing
extensions that didn't meet this requirement, and were confused by
the resulting crash. Let's convert the Assert to a test-and-elog,
in hopes of making the issue clearer for extension authors.
Per gripes from Liu Huailing and RekGRpth. Back-patch to v11,
like the prior commit.
Discussion: https://postgr.es/m/OSZPR01MB6215671E3C5956A034A080DFBEEC9@OSZPR01MB6215.jpnprd01.prod.outlook.com
Discussion: https://postgr.es/m/17035-14607d308ac8643c@postgresql.org
Amit Kapila
Tom Lane
Tomas Vondra
Alvaro Herrera
Noah Misch
Daniel Gustafsson
Robert Haas
Fujii Masao
Michael Paquier
Heikki Linnakangas
David Rowley
Thomas Munro
Peter Eisentraut
Bruce Momjian
Dean Rasheed
Etsuro Fujita