-t will now match views, foreign tables, materialized views, and sequences,
not only plain tables. This is more useful, and also more consistent with
the behavior of pg_dump's -t switch, which has always matched all relation
types.
We're still not there on matching pg_dump's behavior entirely, so mention
that in the docs.
Craig Ringer, reviewed by Pavel Stehule
Patch by David Rowley. Backpatch to 9.5, as some of the calls were new in
9.5, and keeping the code in sync with master makes future backpatching
easier.
Somebody apparently threw darts at the code to decide where to insert
these. They certainly didn't proceed by adding them where other similar
SETs were handled. This at least broke pg_restore, and perhaps other
use-cases too.
strncpy() has a well-deserved reputation for being unsafe, so make an
effort to get rid of nearly all occurrences in HEAD.
A large fraction of the remaining uses were passing length less than or
equal to the known strlen() of the source, in which case no null-padding
can occur and the behavior is equivalent to memcpy(), though doubtless
slower and certainly harder to reason about. So just use memcpy() in
these cases.
In other cases, use either StrNCpy() or strlcpy() as appropriate (depending
on whether padding to the full length of the destination buffer seems
useful).
I left a few strncpy() calls alone in the src/timezone/ code, to keep it
in sync with upstream (the IANA tzcode distribution). There are also a
few such calls in ecpg that could possibly do with more analysis.
AFAICT, none of these changes are more than cosmetic, except for the four
occurrences in fe-secure-openssl.c, which are in fact buggy: an overlength
source leads to a non-null-terminated destination buffer and ensuing
misbehavior. These don't seem like security issues, first because no stack
clobber is possible and second because if your values of sslcert etc are
coming from untrusted sources then you've got problems way worse than this.
Still, it's undesirable to have unpredictable behavior for overlength
inputs, so back-patch those four changes to all active branches.
Commit 0eea8047bf introduced some overly
optimistic assumptions about what could be in a local struct variable's
initializer. (This might in fact be valid code according to C99, but I've
got at least one pre-C99 compiler that falls over on those nonconstant
address expressions.) There is no reason whatsoever for main()'s workspace
to not be static, so revert long_options[] to a static and make the
DumpOptions struct static as well.
As pointed out by Robert, we should really have named pg_rowsecurity
pg_policy, as the objects stored in that catalog are policies. This
patch fixes that and updates the column names to start with 'pol' to
match the new catalog name.
The security consideration for COPY with row level security, also
pointed out by Robert, has also been addressed by remembering and
re-checking the OID of the relation initially referenced during COPY
processing, to make sure it hasn't changed under us by the time we
finish planning out the query which has been built.
Robert and Alvaro also commented on missing OCLASS and OBJECT entries
for POLICY (formerly ROWSECURITY or POLICY, depending) in various
places. This patch fixes that too, which also happens to add the
ability to COMMENT on policies.
In passing, attempt to improve the consistency of messages, comments,
and documentation as well. This removes various incarnations of
'row-security', 'row-level security', 'Row-security', etc, in favor
of 'policy', 'row level security' or 'row_security' as appropriate.
Happy Thanksgiving!
Commit ad5d46a449 thought that we could
get around the known portability issues of strftime's %Z specifier by
using %z instead. However, that idea seems to have been innocent of
any actual research, as it certainly missed the facts that
(1) %z is not portable to pre-C99 systems, and
(2) %z doesn't actually act differently from %Z on Windows anyway.
Per failures on buildfarm member hamerkop.
While at it, centralize the code defining what strftime format we
want to use in pg_dump; three copies of that string seems a bit much.
Most pg_dump.c global variables, which were passed down individually to
dumping routines, are now grouped as members of the new DumpOptions
struct, which is used as a local variable and passed down into routines
that need it. This helps future development efforts; in particular it
is said to enable a mode in which a parallel pg_dump run can output
multiple streams, and have them restored in parallel.
Also take the opportunity to clean up the pg_dump header files somewhat,
to avoid circularity.
Author: Joachim Wieland, revised by Álvaro Herrera
Reviewed by Peter Eisentraut
Without this fix, parallel restore of a schema-only dump can deadlock,
because when the dump is schema-only, the dependency will still be
pointing at the TABLE item rather than the TABLE DATA item.
Robert Haas and Tom Lane
Buildfarm member tick identified an issue where the policies in the
relcache for a relation were were being replaced underneath a running
query, leading to segfaults while processing the policies to be added
to a query. Similar to how TupleDesc RuleLocks are handled, add in a
equalRSDesc() function to check if the policies have actually changed
and, if not, swap back the rsdesc field (using the original instead of
the temporairly built one; the whole structure is swapped and then
specific fields swapped back). This now passes a CLOBBER_CACHE_ALWAYS
for me and should resolve the buildfarm error.
In addition to addressing this, add a new chapter in Data Definition
under Privileges which explains row security and provides examples of
its usage, change \d to always list policies (even if row security is
disabled- but note that it is disabled, or enabled with no policies),
rework check_role_for_policy (it really didn't need the entire policy,
but it did need to be using has_privs_of_role()), and change the field
in pg_class to relrowsecurity from relhasrowsecurity, based on
Heikki's suggestion. Also from Heikki, only issue SET ROW_SECURITY in
pg_restore when talking to a 9.5+ server, list Bypass RLS in \du, and
document --enable-row-security options for pg_dump and pg_restore.
Lastly, fix a number of minor whitespace and typo issues from Heikki,
Dimitri, add a missing #include, per Peter E, fix a few minor
variable-assigned-but-not-used and resource leak issues from Coverity
and add tab completion for role attribute bypassrls as well.
Building on the updatable security-barrier views work, add the
ability to define policies on tables to limit the set of rows
which are returned from a query and which are allowed to be added
to a table. Expressions defined by the policy for filtering are
added to the security barrier quals of the query, while expressions
defined to check records being added to a table are added to the
with-check options of the query.
New top-level commands are CREATE/ALTER/DROP POLICY and are
controlled by the table owner. Row Security is able to be enabled
and disabled by the owner on a per-table basis using
ALTER TABLE .. ENABLE/DISABLE ROW SECURITY.
Per discussion, ROW SECURITY is disabled on tables by default and
must be enabled for policies on the table to be used. If no
policies exist on a table with ROW SECURITY enabled, a default-deny
policy is used and no records will be visible.
By default, row security is applied at all times except for the
table owner and the superuser. A new GUC, row_security, is added
which can be set to ON, OFF, or FORCE. When set to FORCE, row
security will be applied even for the table owner and superusers.
When set to OFF, row security will be disabled when allowed and an
error will be thrown if the user does not have rights to bypass row
security.
Per discussion, pg_dump sets row_security = OFF by default to ensure
that exports and backups will have all data in the table or will
error if there are insufficient privileges to bypass row security.
A new option has been added to pg_dump, --enable-row-security, to
ask pg_dump to export with row security enabled.
A new role capability, BYPASSRLS, which can only be set by the
superuser, is added to allow other users to be able to bypass row
security using row_security = OFF.
Many thanks to the various individuals who have helped with the
design, particularly Robert Haas for his feedback.
Authors include Craig Ringer, KaiGai Kohei, Adam Brightwell, Dean
Rasheed, with additional changes and rework by me.
Reviewers have included all of the above, Greg Smith,
Jeff McCormick, and Robert Haas.
We used to print this information only in verbose mode, but it's argued
that it's useful enough to print always; one reason being that this
provides some documentation about which Postgres versions the dump is
meant to reload into.
Jing Wang, reviewed by Jeevan Chalke
Prior to 9.0, pg_dump handled comments on large objects by dumping a bunch
of COMMENT commands into a single BLOB COMMENTS archive object. With
sufficiently many such comments, some of the commands would likely get
split across bufferloads when restoring, causing failures in
direct-to-database restores (though no problem would be evident in text
output). This is the same type of issue we have with table data dumped as
INSERT commands, and it can be fixed in the same way, by using a mini SQL
lexer to figure out where the command boundaries are. Fortunately, the
COMMENT commands are no more complex to lex than INSERTs, so we can just
re-use the existing lexer for INSERTs.
Per bug #10611 from Jacek Zalewski. Back-patch to all active branches.
This option makes pg_dump, pg_dumpall and pg_restore inject an IF EXISTS
clause to each DROP command they emit. (In pg_dumpall, the clause is
not added to individual objects drops, but rather to the CREATE DATABASE
commands, as well as CREATE ROLE and CREATE TABLESPACE.)
This allows for a better user dump experience when using --clean in case
some objects do not already exist. Per bug #7873 by Dave Rolsky.
Author: Pavel Stěhule
Reviewed-by: Jeevan Chalke, Álvaro Herrera, Josh Kupershmidt
A number of issues were identified by the Coverity scanner and are
addressed in this patch. None of these appear to be security issues
and many are mostly cosmetic changes.
Short comments for each of the changes follows.
Correct the semi-colon placement in be-secure.c regarding SSL retries.
Remove a useless comparison-to-NULL in proc.c (value is dereferenced
prior to this check and therefore can't be NULL).
Add checking of chmod() return values to initdb.
Fix a couple minor memory leaks in initdb.
Fix memory leak in pg_ctl- involves free'ing the config file contents.
Use an int to capture fgetc() return instead of an enum in pg_dump.
Fix minor memory leaks in pg_dump.
(note minor change to convertOperatorReference()'s API)
Check fclose()/remove() return codes in psql.
Check fstat(), find_my_exec() return codes in psql.
Various ECPG memory leak fixes.
Check find_my_exec() return in ECPG.
Explicitly ignore pqFlush return in libpq error-path.
Change PQfnumber() to avoid doing an strdup() when no changes required.
Remove a few useless check-against-NULL's (value deref'd beforehand).
Check rmtree(), malloc() results in pg_regress.
Also check get_alternative_expectfile() return in pg_regress.
Make ftello error-checking consistent to all calls and remove a
bit of ftello-related code which has been #if 0'd out since 2001.
Note that we are not concerned with the ftello() call under
snprintf() failing as it is just building a string to call
exit_horribly() with; printing -1 in such a case is fine.
Improve pg_dump by checking results on various fgetc() calls which
previously were unchecked, ditto for ftello. Also clean up a couple
of very minor memory leaks by waiting to allocate structures until
after the initial check(s).
Issues spotted by Coverity.
There was an apparent attempt to limit the target database for
pg_restore to version 7.1.0 or later. Due to a leading zero this
was interpreted as an octal number, which allowed targets with
version numbers down to 2.87.36. The lowest actual release above
that was 6.0.0, so that was effectively the limit.
Since the success of the restore attempt will depend primarily on
on what statements were generated by the dump run, we don't want
pg_restore trying to guess whether a given target should be allowed
based on version number. Allow a connection to any version. Since
it is very unlikely that anyone would be using a recent version of
pg_restore to restore to a pre-6.0 database, this has little to no
practical impact, but it makes the code less confusing to read.
Issue reported and initial patch suggestion from Joel Jacobson
based on an article by Andrey Karpov reporting on issues found by
PVS-Studio static code analyzer. Final patch based on analysis by
Tom Lane. Back-patch to all supported branches.
When we are using a C99-compliant vsnprintf implementation (which should be
most places, these days) it is worth the trouble to make use of its report
of how large the buffer needs to be to succeed. This patch adjusts
stringinfo.c and some miscellaneous usages in pg_dump to do that, relying
on the logic recently added in libpgcommon's psprintf.c. Since these
places want to know the number of bytes written once we succeed, modify the
API of pvsnprintf() to report that.
There remains near-duplicate logic in pqexpbuffer.c, but since that code
is in libpq, psprintf.c's approach of exit()-on-error isn't appropriate
for use there. Also note that I didn't bother touching the multitude
of places that call (v)snprintf without any attempt to provide a resizable
buffer.
Release-note-worthy incompatibility: the API of appendStringInfoVA()
changed. If there's any third-party code that's calling that directly,
it will need tweaking along the same lines as in this patch.
David Rowley and Tom Lane
We already did this for -t (--table) in 9.3, but missed the other similar
options. For consistency, allow all of them to be specified multiple times.
Unfortunately it's too late to sneak this into 9.3, so commit to master
only.
Move functions used only by pg_dump and pg_restore from dumputils.c to a new
file, pg_backup_utils.c. dumputils.c is linked into psql and some programs
in bin/scripts, so it seems good to keep it slim. The parallel functionality
is moved to parallel.c, as is exit_horribly, because the interesting code in
exit_horribly is parallel-related.
This refactoring gets rid of the on_exit_msg_func function pointer. It was
problematic, because a modern gcc version with -Wmissing-format-attribute
complained if it wasn't marked with PF_PRINTF_ATTRIBUTE, but the ancient gcc
version that Tom Lane's old HP-UX box has didn't accept that attribute on a
function pointer, and gave an error. We still use a similar function pointer
trick for getLocalPQBuffer() function, to use a thread-local version of that
in parallel mode on Windows, but that dodges the problem because it doesn't
take printf-like arguments.
New infrastructure is added which creates a set number of workers
(threads on Windows, forked processes on Unix). Jobs are then
handed out to these workers by the master process as needed.
pg_restore is adjusted to use this new infrastructure in place of the
old setup which created a new worker for each step on the fly. Parallel
dumps acquire a snapshot clone in order to stay consistent, if
available.
The parallel option is selected by the -j / --jobs command line
parameter of pg_dump.
Joachim Wieland, lightly editorialized by Andrew Dunstan.
This GUC allows limiting the time spent waiting to acquire any one
heavyweight lock.
In support of this, improve the recently-added timeout infrastructure
to permit efficiently enabling or disabling multiple timeouts at once.
That reduces the performance hit from turning on lock_timeout, though
it's still not zero.
Zoltán Böszörményi, reviewed by Tom Lane,
Stephen Frost, and Hari Babu
A materialized view has a rule just like a view and a heap and
other physical properties like a table. The rule is only used to
populate the table, references in queries refer to the
materialized data.
This is a minimal implementation, but should still be useful in
many cases. Currently data is only populated "on demand" by the
CREATE MATERIALIZED VIEW and REFRESH MATERIALIZED VIEW statements.
It is expected that future releases will add incremental updates
with various timings, and that a more refined concept of defining
what is "fresh" data will be developed. At some point it may even
be possible to have queries use a materialized in place of
references to underlying tables, but that requires the other
above-mentioned features to be working first.
Much of the documentation work by Robert Haas.
Review by Noah Misch, Thom Brown, Robert Haas, Marko Tiikkaja
Security review by KaiGai Kohei, with a decision on how best to
implement sepgsql still pending.
libpgcommon is a new static library to allow sharing code among the
various frontend programs and backend; this lets us eliminate duplicate
implementations of common routines. We avoid libpgport, because that's
intended as a place for porting issues; per discussion, it seems better
to keep them separate.
The first use case, and the only implemented by this patch, is pg_malloc
and friends, which many frontend programs were already using.
At the same time, we can use this to provide palloc emulation functions
for the frontend; this way, some palloc-using files in the backend can
also be used by the frontend cleanly. To do this, we change palloc() in
the backend to be a function instead of a macro on top of
MemoryContextAlloc(). This was previously believed to cause loss of
performance, but this implementation has been tweaked by Tom and Andres
so that on modern compilers it provides a slight improvement over the
previous one.
This lets us clean up some places that were already with
localized hacks.
Most of the pg_malloc/palloc changes in this patch were authored by
Andres Freund. Zoltán Böszörményi also independently provided a form of
that. libpgcommon infrastructure was authored by Álvaro.
On top of the previous support in pg_dump, add support to specify
multiple tables (by using the -t option multiple times) to
pg_restore, clsuterdb, reindexdb and vacuumdb.
Josh Kupershmidt, reviewed by Karl O. Pinc
In commit 4317e0246c, I accidentally broke
this behavior while rearranging code to ensure that --create wouldn't
affect whether a DATABASE entry gets put into archive-format output.
Thus, 9.2 would issue a DROP DATABASE command in --clean mode, which is
either useless or dangerous depending on the usage scenario.
It should not do that, and no longer does.
A bright spot is that this refactoring makes it easy to allow the
combination of --clean and --create to work sensibly, ie, emit DROP
DATABASE then CREATE DATABASE before reconnecting. Ordinarily we'd
consider that a feature addition and not back-patch it, but it seems
silly to not include the extra couple of lines required in the 9.2
version of the code.
Per report from Guillaume Lelarge, though this is slightly more extensive
than his proposed patch.
We had a number of variants on the theme of "malloc or die", with the
majority named like "pg_malloc", but by no means all. Standardize on the
names pg_malloc, pg_malloc0, pg_realloc, pg_strdup. Get rid of pg_calloc
entirely in favor of using pg_malloc0.
This is an essentially cosmetic change, so no back-patch. (I did find
a couple of places where psql and pg_dump were using plain malloc or
strdup instead of the pg_ versions, but they don't look significant
enough to bother back-patching.)
The same message is used in both pg_restore and pg_dump, and it's
confusing to output "restoring data for table xyz" when the user
is just doing a pg_dump.
While pg_dump has included dependency information in archive-format output
ever since 7.3, it never made any large effort to ensure that that
information was actually useful. In particular, in common situations where
dependency chains include objects that aren't separately emitted in the
dump, the dependencies shown for objects that were emitted would reference
the dump IDs of these un-dumped objects, leaving no clue about which other
objects the visible objects indirectly depend on. So far, parallel
pg_restore has managed to avoid tripping over this misfeature, but only
by dint of some crude hacks like not trusting dependency information in
the pre-data section of the archive.
It seems prudent to do something about this before it rises up to bite us,
so instead of emitting the "raw" dependencies of each dumped object,
recursively search for its actual dependencies among the subset of objects
that are being dumped.
Back-patch to 9.2, since that code hasn't yet diverged materially from
HEAD. At some point we might need to back-patch further, but right now
there are no known cases where this is actively necessary. (The one known
case, bug #6699, is fixed in a different way by my previous patch.) Since
this patch depends on 9.2 changes that made TOC entries be marked before
output commences as to whether they'll be dumped, back-patching further
would require additional surgery; and as of now there's no evidence that
it's worth the risk.
As of 9.2, with the --section option, it is very important that the concept
of "pre data", "data", and "post data" sections of the output be honored
strictly; else a dump divided into separate sectional files might be
unrestorable. However, the dependency-sorting logic knew nothing of
sections and would happily select output orderings that didn't fit that
structure. Doing so was mostly harmless before 9.2, but now we need to be
sure it doesn't do that. To fix, create dummy objects representing the
section boundaries and add dependencies between them and all the normal
objects. (This might sound expensive but it seems to only add a percent or
two to pg_dump's runtime.)
This also fixes a problem introduced in 9.1 by the feature that allows
incomplete GROUP BY lists when a primary key is given in GROUP BY.
That means that views can depend on primary key constraints. Previously,
pg_dump would deal with that by simply emitting the primary key constraint
before the view definition (and hence before the data section of the
output). That's bad enough for simple serial restores, where creating an
index before the data is loaded works, but is undesirable for speed
reasons. But it could lead to outright failure of parallel restores, as
seen in bug #6699 from Joe Van Dyk. That happened because pg_restore would
switch into parallel mode as soon as it reached the constraint, and then
very possibly would try to emit the view definition before the primary key
was committed (as a consequence of another bug that causes the view not to
be correctly marked as depending on the constraint). Adding the section
boundary constraints forces the dependency-sorting code to break the view
into separate table and rule declarations, allowing the rule, and hence the
primary key constraint it depends on, to revert to their intended location
in the post-data section. This also somewhat accidentally works around the
bogus-dependency-marking problem, because the rule will be correctly shown
as depending on the constraint, so parallel pg_restore will now do the
right thing. (We will fix the bogus-dependency problem for real in a
separate patch, but that patch is not easily back-portable to 9.1, so the
fact that this patch is enough to dodge the only known symptom is
fortunate.)
Back-patch to 9.1, except for the hunk that adds verification that the
finished archive TOC list is in correct section order; the place where
it was convenient to add that doesn't exist in 9.1.
The initial implementation of pg_dump's --section option supposed that the
existing --schema-only and --data-only options could be made equivalent to
--section settings. This is wrong, though, due to dubious but long since
set-in-stone decisions about where to dump SEQUENCE SET items, as seen in
bug report from Martin Pitt. (And I'm not totally convinced there weren't
other bugs, either.) Undo that coupling and instead drive --section
filtering off current-section state tracked as we scan through the TOC
list to call _tocEntryRequired().
To make sure those decisions don't shift around and hopefully save a few
cycles, run _tocEntryRequired() only once per TOC entry and save the result
in a new TOC field. This required minor rejiggering of ACL handling but
also allows a far cleaner implementation of inhibit_data_for_failed_table.
Also, to ensure that pg_dump and pg_restore have the same behavior with
respect to the --section switches, add _tocEntryRequired() filtering to
WriteToc() and WriteDataChunks(), rather than trying to implement section
filtering in an entirely orthogonal way in dumpDumpableObject(). This
required adjusting the handling of the special ENCODING and STDSTRINGS
items, but they were pretty weird before anyway.
Minor other code review for the patch, too.
This patch fixes three places (which AFAICT is all of them) where runtime
was O(N^2) in the number of TOC entries, by using an index array to replace
linear searches of the TOC list. This performance issue is a bit less bad
than those recently fixed, because it depends on the number of items dumped
not the number in the source database, so the problem can be dodged by
doing partial dumps.
The previous coding already had an instance of one of the two index arrays
needed, but it was only calculated in parallel-restore cases; now we need
it all the time. I also chose to move the arrays into the ArchiveHandle
data structure, to make this code a bit more ready for the day that we
try to sling multiple ArchiveHandles around in pg_dump or pg_restore.
Since we still need some server-side work before pg_dump can really cope
nicely with tens of thousands of tables, there's probably little point in
back-patching.
Tom Lane
Heikki Linnakangas
Bruce Momjian
Stephen Frost
Alvaro Herrera
Robert Haas
Kevin Grittner
Fujii Masao
Andrew Dunstan
Magnus Hagander
Peter Eisentraut