Windows), arrange for each postmaster child process to be its own process
group leader, and deliver signals SIGINT, SIGTERM, SIGQUIT to the whole
process group not only the direct child process. This provides saner behavior
for archive and recovery scripts; in particular, it's possible to shut down a
warm-standby recovery server using "pg_ctl stop -m immediate", since delivery
of SIGQUIT to the startup subprocess will result in killing the waiting
recovery_command. Also, this makes Query Cancel and statement_timeout apply
to scripts being run from backends via system(). (There is no support in the
core backend for that, but it's widely done using untrusted PLs.) Per gripe
from Stephen Harris and subsequent discussion.
promoted to FATAL) end in exit(1) not exit(0). Then change the postmaster to
allow exit(1) without a system-wide panic, but not for the startup subprocess
or the bgwriter. There were a couple of places that were using exit(1) to
deliberately force a system-wide panic; adjust these to be exit(2) instead.
This fixes the problem noted back in July that if the startup process exits
with elog(ERROR), the postmaster would think everything is hunky-dory and
proceed to start up. Alternative solutions such as trying to run the entire
startup process as a critical section seem less clean, primarily because of
the fact that a fair amount of startup code is shared by all postmaster
children in the EXEC_BACKEND case. We'd need an ugly special case somewhere
near the head of main.c to make it work if it's the child process's
responsibility to determine what happens; and what's the point when the
postmaster already treats different children differently?
in PITR scenarios. We now WAL-log the replacement of old XIDs with
FrozenTransactionId, so that such replacement is guaranteed to propagate to
PITR slave databases. Also, rather than relying on hint-bit updates to be
preserved, pg_clog is not truncated until all instances of an XID are known to
have been replaced by FrozenTransactionId. Add new GUC variables and
pg_autovacuum columns to allow management of the freezing policy, so that
users can trade off the size of pg_clog against the amount of freezing work
done. Revise the already-existing code that forces autovacuum of tables
approaching the wraparound point to make it more bulletproof; also, revise the
autovacuum logic so that anti-wraparound vacuuming is done per-table rather
than per-database. initdb forced because of changes in pg_class, pg_database,
and pg_autovacuum catalogs. Heikki Linnakangas, Simon Riggs, and Tom Lane.
pgstat_bestart() has been called; else any lock-block occurring
during InitPostgres() is disastrous. I believe this explains
recent wasp regression failure; at least it explains the crash I
got while trying to duplicate the problem. I also made
pgstat_report_activity() safe against the same scenario, just
in case. The report_waiting hazard was created by my patch of
19-Aug to include waiting status in pg_stat_activity.
that ps_status provides by appending 'waiting' to the PS display. This
completes the project of making it feasible to turn off process title
updates and instead rely on pg_stat_activity. Per my suggestion a few
weeks ago.
than N seconds apart. This allows a simple, if not very high performance,
means of guaranteeing that a PITR archive is no more than N seconds behind
real time. Also make pg_current_xlog_location return the WAL Write pointer,
add pg_current_xlog_insert_location to return the Insert pointer, and fix
pg_xlogfile_name_offset to return its results as a two-element record instead
of a smashed-together string, as per recent discussion.
Simon Riggs
such as debugging and performance measurement. This consists of two features:
a table of "rendezvous variables" that allows separately-loaded shared
libraries to communicate, and a new GUC setting "local_preload_libraries"
that allows libraries to be loaded into specific sessions without explicit
cooperation from the client application. To make local_preload_libraries
as flexible as possible, we do not restrict its use to superusers; instead,
it is restricted to load only libraries stored in $libdir/plugins/. The
existing LOAD command has also been modified to allow non-superusers to
LOAD libraries stored in this directory.
This patch also renames the existing GUC variable preload_libraries to
shared_preload_libraries (after a suggestion by Simon Riggs) and does some
code refactoring in dfmgr.c to improve clarity.
Korry Douglas, with a little help from Tom Lane.
loaded libraries: call functions _PG_init() and _PG_fini() if the library
defines such symbols. Hence we no longer need to specify an initialization
function in preload_libraries: we can assume that the library used the
_PG_init() convention, instead. This removes one source of pilot error
in use of preloaded libraries. Original patch by Ralf Engelschall,
preload_libraries changes by me.
(table or index) before trying to open its relcache entry. This fixes
race conditions in which someone else commits a change to the relation's
catalog entries while we are in process of doing relcache load. Problems
of that ilk have been reported sporadically for years, but it was not
really practical to fix until recently --- for instance, the recent
addition of WAL-log support for in-place updates helped.
Along the way, remove pg_am.amconcurrent: all AMs are now expected to support
concurrent update.
it's handled just about like timezone; in particular, don't try
to read anything during InitializeGUCOptions. Should solve current
startup failure on Windows, and avoid wasted cycles if a nondefault
setting is specified in postgresql.conf too. Possibly we need to
think about a more general solution for handling 'expensive to set'
GUC options.
pg_usleep at all. Instead call the replacement function in
port/win32/signal.c by that name. Avoids tricky macro-redefinition
logic and suppresses a compiler warning; furthermore it ensures that
no one can accidentally use the non-signal-aware version of pg_usleep
in a Windows backend.
EINTR; the stats code was failing to do this and so were a couple of places
in the postmaster. The stats code assumed that recv() could not return EINTR
if a preceding select() showed the socket to be read-ready, but this is
demonstrably false with our Windows implementation of recv(), and it may
not be the case on all Unix variants either. I think this explains the
intermittent stats regression test failures we've been seeing, as well
as reports of stats collector instability under high load on Windows.
Backpatch as far as 8.0.
To this end, add a couple of columns to pg_class, relminxid and relvacuumxid,
based on which we calculate the pg_database columns after each vacuum.
We now force all databases to be vacuumed, even template ones. A backend
noticing too old a database (meaning pg_database.datminxid is in danger of
falling behind Xid wraparound) will signal the postmaster, which in turn will
start an autovacuum iteration to process the offending database. In principle
this is only there to cope with frozen (non-connectable) databases without
forcing users to set them to connectable, but it could force regular user
database to go through a database-wide vacuum at any time. Maybe we should
warn users about this somehow. Of course the real solution will be to use
autovacuum all the time ;-)
There are some additional improvements we could have in this area: for example
the vacuum code could be smarter about not updating pg_database for each table
when called by autovacuum, and do it only once the whole autovacuum iteration
is done.
I updated the system catalogs documentation, but I didn't modify the
maintenance section. Also having some regression tests for this would be nice
but it's not really a very straightforward thing to do.
Catalog version bumped due to system catalog changes.
be delivered directly to the collector process. The extra process context
swaps required to transfer data through the buffer process seem to outweigh
any value the buffering might have. Per recent discussion and tests.
I modified Bruce's draft patch to use poll() rather than select() where
available (this makes a noticeable difference on my system), and fixed
up the EXEC_BACKEND case.
analyzing, so that future analyze threshold calculations don't get confused.
Also, make sure we correctly track the decrease of live tuples cause by
deletes.
Per report from Dylan Hansen, patches by Tom Lane and me.
changing semantics too much. statement_timestamp is now set immediately
upon receipt of a client command message, and the various places that used
to do their own gettimeofday() calls to mark command startup are referenced
to that instead. I have also made stats_command_string use that same
value for pg_stat_activity.query_start for both the command itself and
its eventual replacement by <IDLE> or <idle in transaction>. There was
some debate about that, but no argument that seemed convincing enough to
justify an extra gettimeofday() call.
current commands; instead, store current-status information in shared
memory. This substantially reduces the overhead of stats_command_string
and also ensures that pg_stat_activity is fully up to date at all times.
Per my recent proposal.
o remove many WIN32_CLIENT_ONLY defines
o add WIN32_ONLY_COMPILER define
o add 3rd argument to open() for portability
o add include/port/win32_msvc directory for
system includes
Magnus Hagander
---------------------------------------------------------------------------
Delay write of pg_stats file to once every five minutes, during
shutdown, or when requested by a backend:
It changes so the file is only written once every 5 minutes (changeable
of course, I just picked something) instead of once every half second.
It's still written when the stats collector shuts down, just as before.
And it is now also written on backend request. A backend requests a
rewrite by simply sending a special stats message. It operates on the
assumption that the backends aren't actually going to read the
statistics file very often, compared to how frequent it's written today.
Magnus Hagander
issued by autovacuum. Add accessor functions to them, and use those in the
pg_stat_*_tables system views.
Catalog version bumped due to changes in the pgstat views and the pgstat file.
Patch from Larry Rosenman, minor improvements by me.
in various places that were previously doing ad hoc pg_database searches.
This may speed up database-related privilege checks a little bit, but
the main motivation is to eliminate the performance reason for having
ReverifyMyDatabase do such a lot of stuff (viz, avoiding repeat scans
of pg_database during backend startup). The locking reason for having
that routine is about to go away, and it'd be good to have the option
to break it up.
shutdown, or when requested by a backend:
It changes so the file is only written once every 5 minutes (changeable
of course, I just picked something) instead of once every half second.
It's still written when the stats collector shuts down, just as before.
And it is now also written on backend request. A backend requests a
rewrite by simply sending a special stats message. It operates on the
assumption that the backends aren't actually going to read the
statistics file very often, compared to how frequent it's written today.
Magnus Hagander
Per recent discussion, this seems to be making the stats less accurate
rather than more so, particularly on Windows where PID values may be
reused very quickly. Patch by Peter Brant.
byte-swapping on the port number which causes the call to fail on Intel
Macs.
This patch uses htons() instead of htonl() and fixes this bug.
Ashley Clark
it later. This fixes a problem where EXEC_BACKEND didn't have progname
set, causing a segfault if log_min_messages was set below debug2 and our
own snprintf.c was being used.
Also alway strdup() progname.
Backpatch to 8.1.X and 8.0.X.
temp table not only our own process' tables. It's not real important
since vacuum.c will skip temp tables anyway, but might as well make the
code do what it claims to do.
files: avoid creating stats hashtable entries for tables that aren't being
touched except by vacuum/analyze, ensure that entries for dropped tables are
removed promptly, and tweak the data layout to avoid storing useless struct
padding. Also improve the performance of pgstat_vacuum_tabstat(), and make
sure that autovacuum invokes it exactly once per autovac cycle rather than
multiple times or not at all. This should cure recent complaints about 8.1
showing much higher stats I/O volume than was seen in 8.0. It'd still be a
good idea to revisit the design with an eye to not re-writing the entire
stats dataset every half second ... but that would be too much to backpatch,
I fear.