When a stored expression depends on a user-defined cast, the backend
records the dependency as being on the cast's implementation function
--- or indeed, if there's no cast function involved but just
RelabelType or CoerceViaIO, no dependency is recorded at all. This
is problematic for pg_dump, which is at risk of dumping things in the
wrong order leading to restore failures. Given the lack of previous
reports, the risk isn't that high, but it can be demonstrated if the
cast is used in some view whose rowtype is then used as an input or
result type for some other function. (That results in the view
getting hoisted into the functions portion of the dump, ahead of
the cast.)
A logically bulletproof fix for this would require including the
cast's OID in the parsed form of the expression, whence it could be
extracted by dependency.c, and then the stored dependency would force
pg_dump to do the right thing. Such a change would be fairly invasive,
and certainly not back-patchable. Moreover, since we'd prefer that
an expression using cast syntax be equal() to one doing the same
thing by explicit function call, the cast OID field would have to
have special ignored-by-comparisons semantics, making things messy.
So, let's instead fix this by a very simple hack in pg_dump: change
the object-type priority order so that casts are initially sorted
before functions, immediately after types. This fixes the problem
in a fairly direct way for casts that have no implementation function.
For those that do, the implementation function will be hoisted to just
before the cast by the dependency sorting step, so that we still have
a valid dump order. (I'm not sure that this provides a full guarantee
of no problems; but since it's been like this for many years without
any previous reports, this is probably enough to fix it in practice.)
Per report from Дмитрий Иванов.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAPL5KHoGa3uvyKp6z6m48LwCnTsK+LRQ_mcA4uKGfqAVSEjV_A@mail.gmail.com
If a table contains a generated column that's preceded by a dropped
column, dumpTableData_insert failed to account for the dropped
column, and would emit DEFAULT placeholder(s) in the wrong column(s).
This resulted in failures at restore time. The default COPY code path
did not have this bug, likely explaining why it wasn't noticed sooner.
While we're fixing this, we can be a little smarter about the
situation: (1) avoid unnecessarily fetching the values of generated
columns, (2) omit generated columns from the output, too, if we're
using --column-inserts. While these modes aren't expected to be
as high-performance as the COPY path, we might as well be as
efficient as we can; it doesn't add much complexity.
Per report from Дмитрий Иванов.
Back-patch to v12 where generated columns came in.
Discussion: https://postgr.es/m/CAPL5KHrkBniyQt5e1rafm5DdXvbgiiqfEQEJ9GjtVzN71Jj5pA@mail.gmail.com
Previously it was impossible to terminate these programs via control-C
while they were prompting for a password. We can fix that trivially
for their initial password prompts, by moving setup of the SIGINT
handler from just before to just after their initial GetConnection()
calls.
This fix doesn't permit escaping out of later re-prompts, but those
should be exceedingly rare, since the user's password or the server's
authentication setup would have to have changed meanwhile. We
considered applying a fix similar to commit 46d665bc2, but that
seemed more complicated than it'd be worth. Moreover, this way is
back-patchable, which that wasn't.
The misbehavior exists in all supported versions, so back-patch to all.
Tom Lane and Nathan Bossart
Discussion: https://postgr.es/m/747443.1635536754@sss.pgh.pa.us
The error handling here was a mess, as a result of a fundamentally
bad design (relying on errno to keep its value much longer than is
safe to assume) as well as a lot of just plain sloppiness, both as
to noticing errors at all and as to reporting the correct errno.
Moreover, the recent addition of LZ4 compression broke things
completely, because liblz4 doesn't use errno to report errors.
To improve matters, keep the error state in the DirectoryMethodData or
TarMethodData struct, and add a string field so we can handle cases
that don't set errno. (The tar methods already had a version of this,
but it can be done more efficiently since all these cases use a
constant error string.) Make the dir and tar methods handle errors
in basically identical ways, which they didn't before.
This requires copying errno into the state struct in a lot of places,
which is a bit tedious, but it has the virtue that we can get rid of
ad-hoc code to save and restore errno in a number of places ... not
to mention that it fixes other places that should've saved/restored
errno but neglected to.
In passing, fix some pointlessly static buffers to be ordinary
local variables.
There remains an issue about exactly how to handle errors from
fsync(), but that seems like material for its own patch.
While the LZ4 problems are new, all the rest of this is fixes for
old bugs, so backpatch to v10 where walmethods.c was introduced.
Patch by me; thanks to Michael Paquier for review.
Discussion: https://postgr.es/m/1343113.1636489231@sss.pgh.pa.us
Coverity complained that applying get_gz_error after a failed gzclose,
as we did in one place in pg_basebackup, is unsafe. I think it's
right: it's entirely likely that the call is touching freed memory.
Change that to inspect errno, as we do for other gzclose calls.
Also, be careful to initialize errno to zero immediately before any
gzclose() call where we care about the error status. (There are
some calls where we don't, because we already failed at some previous
step.) This ensures that we don't get a misleadingly irrelevant
error code if gzclose() fails in a way that doesn't set errno.
We could work harder at that, but it looks to me like all such cases
are basically can't-happen if we're not misusing zlib, so it's
not worth the extra notational cruft that would be required.
Also, fix several places that simply failed to check for close-time
errors at all, mostly at some remove from the close or gzclose itself;
and one place that did check but didn't bother to report the errno.
Back-patch to v12. These mistakes are older than that, but between
the frontend logging API changes that happened in v12 and the fact
that frontend code can't rely on %m before that, the patch would need
substantial revision to work in older branches. It doesn't quite
seem worth the trouble given the lack of related field complaints.
Patch by me; thanks to Michael Paquier for review.
Discussion: https://postgr.es/m/1343113.1636489231@sss.pgh.pa.us
The documentation says plainly that \password acts on "the current user"
by default. What it actually acted on, or tried to, was the username
used to log into the current session. This is not the same thing if
one has since done SET ROLE or SET SESSION AUTHENTICATION. Aside from
the possible surprise factor, it's quite likely that the current role
doesn't have permissions to set the password of the original role.
To fix, use "SELECT CURRENT_USER" to get the role name to act on.
(This syntax works with servers at least back to 7.0.) Also, in
hopes of reducing confusion, include the role name that will be
acted on in the password prompt.
The discrepancy from the documentation makes this a bug, so
back-patch to all supported branches.
Patch by me; thanks to Nathan Bossart for review.
Discussion: https://postgr.es/m/747443.1635536754@sss.pgh.pa.us
CIC and REINDEX CONCURRENTLY assume backends see their catalog changes
no later than each backend's next transaction start. That failed to
hold when a backend absorbed a relevant invalidation in the middle of
running RelationBuildDesc() on the CIC index. Queries that use the
resulting index can silently fail to find rows. Fix this for future
index builds by making RelationBuildDesc() loop until it finishes
without accepting a relevant invalidation. It may be necessary to
reindex to recover from past occurrences; REINDEX CONCURRENTLY suffices.
Back-patch to 9.6 (all supported versions).
Noah Misch and Andrey Borodin, reviewed (in earlier versions) by Andres
Freund.
Discussion: https://postgr.es/m/20210730022548.GA1940096@gust.leadboat.com
Non-global default privilege entries should be dumped as-is,
not made relative to the default ACL for their object type.
This would typically only matter if one had revoked some
on-by-default privileges in a global entry, and then wanted
to grant them again in a non-global entry.
Per report from Boris Korzun. This is an old bug, so back-patch
to all supported branches.
Neil Chen, test case by Masahiko Sawada
Discussion: https://postgr.es/m/111621616618184@mail.yandex.ru
Discussion: https://postgr.es/m/CAA3qoJnr2+1dVJObNtfec=qW4Z0nz=A9+r5bZKoTSy5RDjskMw@mail.gmail.com
If the blob TOC file cannot be parsed, the error message was failing
to print the filename as the variable holding it was shadowed by the
destination buffer for parsing. When the filename fails to parse,
the error will print an empty string:
./pg_restore -d foo -F d dump
pg_restore: error: invalid line in large object TOC file "": ..
..instead of the intended error message:
./pg_restore -d foo -F d dump
pg_restore: error: invalid line in large object TOC file "dump/blobs.toc": ..
Fix by renaming both variables as the shared name was too generic to
store either and still convey what the variable held.
Backpatch all the way down to 9.6.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/A2B151F5-B32B-4F2C-BA4A-6870856D9BDE@yesql.se
Backpatch-through: 9.6
Make sure that the string parsing is limited by the size of the
destination buffer.
In pg_basebackup the available values sent from the server
is limited to two characters so there was no risk of overflow.
In pg_dump the buffer is bounded by MAXPGPATH, and thus the limit
must be inserted via preprocessor expansion and the buffer increased
by one to account for the terminator. There is no risk of overflow
here, since in this case, the buffer scanned is smaller than the
destination buffer.
Backpatch the pg_basebackup fix to 11 where it was introduced, and
the pg_dump fix all the way down to 9.6.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/B14D3D7B-F98C-4E20-9459-C122C67647FB@yesql.se
Backpatch-through: 11 and 9.6
It was clearly the intent to do so all along, but the original coding
fat-fingered this by checking the wrong array element. We fixed it
in passing in 403a3d91c, but that later got reverted, and we forgot
to keep this bug fix.
Most of the time this'd be relatively harmless, since once we lock
any of the partitioned table's leaf partitions, that would suffice
to prevent major DDL on the partitioned table itself. However, a
childless partitioned table would get dumped with no relevant lock
whatsoever, possibly allowing dump failure or inconsistent output.
Unlike 403a3d91c, there are no versioning concerns, since every server
version that has partitioned tables will allow you to lock one.
Back-patch to v10 where partitioned tables were introduced.
Discussion: https://postgr.es/m/1018205.1634346327@sss.pgh.pa.us
Avoid calling contrib/amcheck functions with relations that are
unsuitable for checking. Specifically, don't attempt verification of
temporary relations, or indexes whose pg_index entry indicates that the
index is invalid, or not ready.
These relations are not supported by any of the contrib/amcheck
functions, for reasons that are pretty fundamental. For example, the
implementation of REINDEX CONCURRENTLY can add its own "transient"
pg_index entries, which has rather unclear implications for the B-Tree
verification functions, at least in the general case -- so they just
treat it as an error. It falls to the amcheck caller (in this case
pg_amcheck) to deal with the situation at a higher level.
pg_amcheck now simply treats these conditions as additional "visibility
concerns" when it queries system catalogs. This is a little arbitrary.
It seems to have the least problems among any of the available
alternatives.
Author: Mark Dilger <mark.dilger@enterprisedb.com>
Reported-By: Alexander Lakhin <exclusion@gmail.com>
Reviewed-By: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Bug: #17212
Discussion: https://postgr.es/m/17212-34dd4a1d6bba98bf@postgresql.org
Backpatch: 14-, where pg_amcheck was introduced.
This fixes a set of issues that cause different breakages or annoyances
when using pg_upgrade's test.sh to do upgrades across different major
versions:
- test.sh is completely broken when using v14 as new version because of
the removal of testtablespace/ as Makefile rule. Older versions of
pg_regress don't support --make-tablespacedir, blocking the creation of
the tablespace. In order to fix that, it is simple enough to create
those directories in the script itself, but only do that when an old
version is involved. This fix is needed on HEAD and REL_14_STABLE.
- The script would fail when using PG <= v11 as old version because of
WITH OIDS relations not supported in v12. In order to fix this, this
steals a method from the buildfarm that uses a DO block to change all
the relations marked as WITH OIDS, allowing pg_upgrade to pass. This is
more portable than using ALTER TABLE queries on the relations causing
issues. This is fixed down to v12, and authored originally by Andrew
Dunstan.
- Not using --extra-float-digits=0 with v11 as old version causes
a lot of diffs in the dumps, making the whole unreadable. This gets
only done when using v11 as old version. This is fixed down to v12.
The buildfarm code uses that already.
Note that the addition of --wal-segsize and --allow-group-access breaks
the script when using v10 or older at initdb time as these got added in
11. 10 would be EOL'd next year and nobody has complained about those
problems yet, so nothing is done about that. This means that this
commit fixes upgrade tests using test.sh with v11 as minimum older
version, up to HEAD, and that it is enough to apply this change down to
12. The old and new dumps still generate diffs, still require manual
checks, and more could be done to reduce the noise, but this allows the
tests to run with a rather minimal amount of them.
I have tested this commit and test.sh with v11 as minimum across all the
branches where this is applied. Note that this commit has no impact on
the normal pg_upgrade test run with a simple "make check".
Author: Justin Pryzby, Andrew Dunstan, Michael Paquier
Discussion: https://postgr.es/m/20201206180248.GI24052@telsasoft.com
Backpatch-through: 12
Incrementing the level of the call stack reported is useful for
debugging purposes as it allows to control which part of the test is
exactly failing, especially if a test is structured with subroutines
that call routines from Test::More.
This adds more incrementations of $Test::Builder::Level where debugging
gets improved (for example it does not make sense for some paths like
pg_rewind where long subroutines are used).
A note is added to src/test/perl/README about that, based on a
suggestion from Andrew Dunstan and a wording coming from both of us.
Usage of Test::Builder::Level has spread in 12, so a backpatch down to
this version is done.
Reviewed-by: Andrew Dunstan, Peter Eisentraut, Daniel Gustafsson
Discussion: https://postgr.es/m/YV1CCFwgM1RV1LeS@paquier.xyz
Backpatch-through: 12
Per discussion, let's just follow CLDR's default zone mappings
faithfully. There are two changes here that are clear improvements:
* Mapping "Greenwich Standard Time" to Atlantic/Reykjavik is actually
a better fit than using London, because Iceland hasn't observed DST
since 1968, so this is more nearly what people might expect.
* Since the "Samoa" zone is specified to be UTC+13:00, we must map
it to Pacific/Apia not Pacific/Samoa; the latter refers to American
Samoa which is now on the other side of the date line.
The rest of these changes look like they're choosing the most populous
IANA zone as representative. Whatever the details, we're just going
to say "if you don't like this mapping, complain to CLDR".
Discussion: https://postgr.es/m/3266414.1633045628@sss.pgh.pa.us
This corrects a bunch of entries in win32_tzmap[], and adds a few
new ones, based on the CLDR project's windowsZones.xml file.
Non-cosmetic changes fall into four main categories:
* Flat-out errors:
US/Aleutan doesn't exist
America/Salvador doesn't exist
Asia/Baku is wrong for Yerevan
Asia/Dhaka (Bangladesh) is wrong for Astana (Kazakhstan)
Europe/Bucharest is wrong for Chisinau
America/Mexico_City is wrong for Chetumal
America/Buenos_Aires is wrong for Cayenne
America/Caracas has its own zone, so poor fit for La Paz
US/Eastern is wrong for Haiti
US/Eastern is wrong for Indiana (East)
Asia/Karachi is wrong for Tashkent
Etc/UTC+12 doesn't exist
Signs of Etc/GMT zones were backwards
* Judgment calls:
(These changes follow CLDR's choices, except for the first one)
Use Europe/London for "Greenwich Standard Time", since that seems much
more likely than Africa/Casablanca to be what people will think that
zone name means. CLDR has Atlantic/Reykjavik here, but that's no better.
Asia/Shanghai seems a better fit than Hong Kong for "China Standard
Time".
Europe/Sarajevo is now a link to Belgrade, ie "Central Europe Standard
Time"; so use Warsaw for "Central European Standard Time".
America/Sao_Paulo seems more representative than Araguaina for
"E. South America Standard Time".
Africa/Johannesburg seems more representative than Harare for
"South Africa Standard Time".
* New Windows zone names:
"Israel Standard Time"
"Kaliningrad Standard Time"
"Russia Time Zone N" for various N
"Singapore Standard Time"
"South Sudan Standard Time"
"W. Central Africa Standard Time"
"West Bank Standard Time"
"Yukon Standard Time"
Some of these replace older spellings, but I kept the older spellings
too in case our code runs on a machine with the older data.
* Replace aliases (tzdb Links) with underlying city-named zones:
(This tracks tzdb's longstanding practice, and reduces inconsistency
with the rest of the entries, as well as with CLDR.)
US/Alaska
Asia/Kuwait
Asia/Muscat
Canada/Atlantic
Australia/Canberra
Canada/Saskatchewan
US/Central
US/Eastern
US/Hawaii
US/Mountain
Canada/Newfoundland
US/Pacific
Back-patch to all supported branches, as is our usual practice for
time zone data updates.
Discussion: https://postgr.es/m/3266414.1633045628@sss.pgh.pa.us
The original intent seems to have been to sort case-insensitively
by the Windows zone name, but various changes over the years did
not get that memo. This commit just moves a few entries to
restore exact alphabetic order, to ease comparison to the outputs
of processing scripts.
Back-patch to all supported branches, as is our usual practice for
time zone data updates.
Discussion: https://postgr.es/m/3266414.1633045628@sss.pgh.pa.us
Previously socket errors such as invalid socket or socket wait method failures
during benchmark caused pgbench to exit with status 0. Instead, errors during
the run should result in exit status 2.
Back-patch to v12 where pgbench started reporting exit status.
Original complaint and patch by Hayato Kuroda.
Author: Yugo Nagata, Fabien COELHO
Reviewed-by: Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/TYCPR01MB5870057375ACA8A73099C649F5349@TYCPR01MB5870.jpnprd01.prod.outlook.com
The failure of socket wait method like "select()" doesn't terminate pgbench.
So the log level of error message when that failure happens should be ERROR.
But previously FATAL was used in that case.
Back-patch to v13 where pgbench started using common logging API.
Author: Yugo Nagata, Fabien COELHO
Reviewed-by: Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/20210617005934.8bd37bf72efd5f1b38e6f482@sraoss.co.jp
That allows to include just visibilitymapdefs.h from file.c, and in turn,
remove include of postgres.h from relcache.h.
Reported-by: Andres Freund
Discussion: https://postgr.es/m/20210913232614.czafiubr435l6egi%40alap3.anarazel.de
Author: Alexander Korotkov
Reviewed-by: Andres Freund, Tom Lane, Alvaro Herrera
Backpatch-through: 13
When throttling is used, transactions that lag behind schedule by
more than the latency limit are counted and reported as skipped.
Previously, there was the case where pgbench counted all skipped
transactions even if the timer specified in -T option was exceeded.
This could take a very long time to do that especially when unrealistically
high rate setting in -R option caused quite a lot of transactions that
lagged behind schedule. This could prevent pgbench from ending
immediately, and so pgbench could look like it got stuck to users.
To fix the issue, this commit changes pgbench so that it stops counting
skipped transactions as soon as the timer is exceeded. The timer can
make pgbench end soon even when there are lots of skipped transactions
that have not been counted yet.
Note that there is no guarantee that all skipped transactions are
counted under -T though there is under -t. This is OK in practice
because it's very unlikely to happen with realistic setting. Also this is
not the issue that this commit newly introdues. There used to be
the case where pgbench ended without counting all skipped
transactions since before.
Back-patch to v14. Per discussion, we decided not to bother
back-patch to the stable branches because it's hard to imagine
the issue happens in practice (with realistic setting).
Author: Yugo Nagata, Fabien COELHO
Reviewed-by: Greg Sabino Mullane, Fujii Masao
Discussion: https://postgr.es/m/20210613040151.265ff59d832f835bbcf8b3ba@sraoss.co.jp
Coverity complained that one caller of getFormattedTypeName() failed
to free the returned string. Which is true, but rather than fixing
that one, let's get rid of this tedious and error-prone requirement.
Now that getFormattedTypeName() caches its result, strdup'ing that
result and expecting the caller to free it accomplishes little except
to waste cycles. We do create a leak in the case where getTypes didn't
make a TypeInfo for the type, but that basically shouldn't ever happen.
Back-patch, as commit 6c450a861 was. This isn't a particularly
interesting bug fix, but the API change seems like a hazard for
future back-patching activity if we don't back-patch it.
Replace fixed-length command buffers with psprintf() calls. We didn't
have anything as convenient as psprintf() when this code was written,
but now that we do, there's little reason for the limitation to
stand. Removing it eliminates some corner cases where (for example)
starting the postmaster with a whole lot of options fails.
Most individual file names that pg_ctl deals with are still restricted
to MAXPGPATH, but we've seldom had complaints about that limitation
so long as it only applies to one filename.
Back-patch to all supported branches.
Phil Krylov
Discussion: https://postgr.es/m/567e199c6b97ee19deee600311515b86@krylov.eu
When -C/--connect option is specified, pgbench establishes and closes
the connection for each transaction. In this case pgbench needs to
measure the times taken for all those connections and disconnections,
to include the average connection time in the benchmark result.
But previously pgbench could not measure those disconnection delays.
To fix the bug, this commit makes pgbench measure the disconnection
delays whenever the connection is closed at the end of transaction,
if -C/--connect option is specified.
Back-patch to v14. Per discussion, we concluded not to back-patch to v13
or before because changing that behavior in stable branches would
surprise users rather than providing benefits.
Author: Yugo Nagata
Reviewed-by: Fabien COELHO, Tatsuo Ishii, Asif Rehman, Fujii Masao
Discussion: https://postgr.es/m/20210614151155.a393bc7d8fed183e38c9f52a@sraoss.co.jp
The code printing expressions for extended statistics doubled the
parens, producing results like ((a+1)), which is unnecessary and not
consistent with how we print expressions elsewhere.
Fixed by tweaking the code to produce just a single set of parens.
Reported by Mark Dilger, fix by me. Backpatch to 14, where support for
extended statistics on expressions was added.
Reported-by: Mark Dilger
Discussion: https://postgr.es/m/20210122040101.GF27167%40telsasoft.com
For no particularly good reason, getPolicies() queried pg_policy
separately for each table. We can collect all the policies in
a single query instead, and attach them to the correct TableInfo
objects using findTableByOid() lookups. On the regression
database, this reduces the number of queries substantially, and
provides a visible savings even when running against a local
server.
Per complaint from Hubert Depesz Lubaczewski. Since this is such
a simple fix and can have a visible performance benefit, back-patch
to all supported branches.
Discussion: https://postgr.es/m/20210826084430.GA26282@depesz.com
There's long been a "TODO: there might be some value in caching
the results" annotation on pg_dump's getFormattedTypeName function;
but we hadn't gotten around to checking what it was costing us to
repetitively look up type names. It turns out that when dumping the
current regression database, about 10% of the total number of queries
issued are duplicative format_type() queries. However, Hubert Depesz
Lubaczewski reported a not-unusual case where these account for over
half of the queries issued by pg_dump. Individually these queries
aren't expensive, but when network lag is a factor, they add up to a
problem. We can very easily add some caching to getFormattedTypeName
to solve it.
Since this is such a simple fix and can have a visible performance
benefit, back-patch to all supported branches.
Discussion: https://postgr.es/m/20210826084430.GA26282@depesz.com
Per our message style guidelines, for human consumption we quote
qualified names as a whole rather than each part separately; but commits
bc085205c8 introduced a deviation for extended statistics and
a4d75c86bf copied it. I don't agree with this policy applying to
names shown by psql, but that's a poor reason to deviate from the
practice only in two obscure corners, so make said corners use the same
style as everywhere else.
Backpatch to 14. The first of these is older, but I'm not sure we want
to destabilize the psql output in the older branches for such a small
thing.
Discussion: https://postgr.es/m/20210828181618.GS26465@telsasoft.com
Commit 547f04e734 changed pgbench so that it used the measurement result
of connection delays in its benchmark report only when -C/--connect option
is specified. But previously those delays were unnecessarily measured
even when that option is not specified. Which was a waste of cycles.
This commit improves pgbench so that it avoids such unnecessary measurement.
Back-patch to v14 where commit 547f04e734 first appeared.
Author: Yugo Nagata
Reviewed-by: Fabien COELHO, Asif Rehman, Fujii Masao
Discussion: https://postgr.es/m/20210614151155.a393bc7d8fed183e38c9f52a@sraoss.co.jp
Déjà vu of commit fc40ba1296, for another backslash command.
Strictly speaking this isn't a bug, but since all references to catalog
objects are schema-qualified, we might as well be consistent. The
omission first appeared in commit ad600bba04 and replicated in
a4d75c86bf15; backpatch to 14.
Author: Justin Pryzby <pryzbyj@telsasoft.com>
Discussion: https://postgr.es/m/20210827193151.GN26465@telsasoft.com
Strictly speaking this isn't a bug, but since all references to catalog
objects are schema-qualified, we might as well be consistent. The
omission first appeared in commit 1c5d9270e3, so backpatch to 12.
Author: Justin Pryzby <pryzbyj@telsasoft.com>
Discussion: https://postgr.es/m/20210827193151.GN26465@telsasoft.com
The current refresh behavior tries to just refresh added/dropped
publications but that leads to removing wrong tables from subscription. We
can't refresh just the dropped publication because it is quite possible
that some of the tables are removed from publication by that time and now
those will remain as part of the subscription. Also, there is a chance
that the tables that were part of the publication being dropped are also
part of another publication, so we can't remove those.
So, we decided that by default, add/drop commands will also act like
REFRESH PUBLICATION which means they will refresh all the publications. We
can keep the old behavior for "add publication" but it is better to be
consistent with "drop publication".
Author: Hou Zhijie
Reviewed-by: Masahiko Sawada, Amit Kapila
Backpatch-through: 14, where it was introduced
Discussion: https://postgr.es/m/OS0PR01MB5716935D4C2CC85A6143073F94EF9@OS0PR01MB5716.jpnprd01.prod.outlook.com
In a backup manifest, WAL-Ranges stores the range of WAL that is
required for the backup to be valid. pg_verifybackup would then
internally use pg_waldump for the checks based on this data.
When the timeline where the backup started was more than 1 with a
history file looked at for the manifest data generation, the calculation
of the WAL range for the first timeline to check was incorrect. The
previous logic used as start LSN the start position of the first
timeline, but it needs to use the start LSN of the backup. This would
cause failures with pg_verifybackup, or any tools making use of the
backup manifests.
This commit adds a test based on a logic using a self-promoted node,
making it rather cheap.
Author: Kyotaro Horiguchi
Discussion: https://postgr.es/m/20210818.143031.1867083699202617521.horikyota.ntt@gmail.com
Backpatch-through: 13
Using --quiet in combination with --no-strict-names didn't work as
documented, a warning message was still emitted. Since the --quiet
flag was working in an unconventional way to other utilities, fix
by removing the functionality instead.
Backpatch through 14 where pg_amcheck was introduced.
Bug: 17148
Reported-by: Chen Jiaoqian <chenjq.jy@fujitsu.com>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://postgr.es/m/17148-b5087318e2b04fc6@postgresql.org
Backpatch-through: 14
The skip options set for all-visible and all-frozen were incorrect
as they used space rather than hyphen, causing a syntax error when
invoked. Also, the option for not skipping any pages at all, none,
was documented but not implemented.
Backpatch through 14 where pg_amcheck was introduced.
Bug: #17149
Reported-by: Chen Jiaoqian <chenjq.jy@fujitsu.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/17149-5918ea748da36b15@postgresql.org
Backpatch-through: 14
Up to now we did a PQconsumeInput() for each pipelined query, asking the OS
for more input - which it often won't have, as all results might already have
been sent. That turns out to have a noticeable performance impact.
Alvaro Herrera reviewed the idea to add the PQisBusy() check, but not this
concrete patch.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210720180039.23rivhdft3l4mayn@alap3.anarazel.de
Backpatch: 14, where libpq/pgbench pipelining was introduced.
Certain versions of msys2/Windows have been observed to resolve symlinks
in perl2host rather than just follow them. This defeats using a
symlinked shorter path to a longer path, and makes certain tests fail.
We therefore call perl2host on the parent directory of the symlink and
thereafter just use that result.
Apply to release 14 where the problem has been observed.
pg_verifybackup needs by default pg_waldump to check after a range of
WAL segments required for a backup, except if --no-parse-wal is
specified. The code checked for the presence of the binary pg_waldump
in an installation and reported an error, but it forgot to properly
exit(). This could lead to confusing errors reported.
Reviewed-by: Robert Haas, Fabien Coelho
Discussion: https://postgr.es/m/YQDMdB+B68yePFeT@paquier.xyz
Backpatch-through: 13
Add pg_resetxlog -u option to set the oldest xid in pg_control.
Previously -x set this value be -2 billion less than the -x value.
However, this causes the server to immediately scan all relation's
relfrozenxid so it can advance pg_control's oldest xid to be inside the
autovacuum_freeze_max_age range, which is inefficient and might disrupt
diagnostic recovery. pg_upgrade will use this option to better create
the new cluster to match the old cluster.
Reported-by: Jason Harvey, Floris Van Nee
Discussion: https://postgr.es/m/20190615183759.GB239428@rfd.leadboat.com, 87da83168c644fd9aae38f546cc70295@opammb0562.comp.optiver.com
Author: Bertrand Drouvot
Backpatch-through: 9.6
Commit ad600bba04 added psql command \dX listing extended statistics
objects, but it failed to consider search_path when selecting the
elements so some of the returned elements might be invisible.
The visibility was already considered for tab completion (added by
commit d99d58cdc8), so adding it to the query is fairly simple.
Reported and fix by Justin Pryzby, regression tests by me. Backpatch
to PostgreSQL 14, where \dX was introduced.
Batchpatch-through: 14
Author: Justin Pryzby
Reviewed-by: Tatsuro Yamada
Discussion: https://postgr.es/m/c027a541-5856-75a5-0868-341301e1624b%40nttcom.co.jp_1
These have been introduced by 7fbe0c8, and could happen for
pg_basebackup and pg_receivewal.
Per report from Coverity for the ones in walmethods.c, I have spotted
the ones in receivelog.c after more review.
Backpatch-through: 10
The logic handling the opening of new WAL segments was fuzzy when using
--compress if a partial, non-compressed, segment with the same base name
existed in the repository storing those files. In this case, using
--compress would cause the code to first check for the existence and the
size of a non-compressed segment, followed by the opening of a new
compressed, partial, segment. The code was accidentally working
correctly on most platforms as the buildfarm has proved, except
bowerbird where gzflush() could fail in this code path. It is wrong
anyway to take the code path used pre-padding when creating a new
partial, non-compressed, segment, so let's fix it.
Note that this issue exists when users mix successive runs of
pg_receivewal with or without compression, as discovered with the tests
introduced by ffc9dda.
While on it, this refactors the code so as code paths that need to know
about the ".gz" suffix are down from four to one in walmethods.c, easing
a bit the introduction of new compression methods. This addresses a
second issue where log messages generated for an unexpected failure
would not show the compressed segment name involved, which was
confusing, printing instead the name of the non-compressed equivalent.
Reported-by: Georgios Kokolatos
Discussion: https://postgr.es/m/YPDLz2x3o1aX2wRh@paquier.xyz
Backpatch-through: 10
Commit 3499df0d added a comment that incorrectly suggested that
--force-index-cleanup did not appear in the same major version as the
similar --no-index-cleanup option. In fact, both options are new to
PostgreSQL 14.
Backpatch: 14-, where both options were introduced.
pg_dump failed to preserve the 'enabled' flag (which can be not only
disabled, but also REPLICA or ALWAYS) for partitions which had it
changed from their respective parents. Attempt to handle that by
including a definition for such triggers in the dump, but replace the
standard CREATE TRIGGER line with an ALTER TRIGGER line.
Backpatch to 11, where these triggers can exist. In branches 11 and 12,
pick up a few test lines from commit b9b408c487 to verify that
pg_upgrade is okay with these arrangements.
Co-authored-by: Justin Pryzby <pryzby@telsasoft.com>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20200930223450.GA14848@telsasoft.com
Commit 547f04e changed pgbench to use microsecond accounting, but
introduced a couple of logging and aggregation bugs:
1. We print Unix epoch timestamps so that you can correlate them with
other logs, but these were inadvertently changed to use a
system-dependent reference epoch. Compute Unix timestamps, and begin
aggregation intervals on the boundaries of whole Unix epoch seconds, as
before.
2. The user-supplied aggregation interval needed to be scaled.
Back-patch to 14.
Author: Fabien COELHO <coelho@cri.ensmp.fr>
Author: Yugo NAGATA <nagata@sraoss.co.jp>
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reported-by: YoungHwan Joo <rulyox@gmail.com>
Reported-by: Gregory Smith <gregsmithpgsql@gmail.com>
Discussion: https://postgr.es/m/CAF7igB1r6wRfSCEAB-iZBKxkowWY6%2BdFF2jObSdd9%2BiVK%2BvHJg%40mail.gmail.com
Discussion: https://postgr.es/m/CAHLJuCW_8Vpcr0%3Dt6O_gozrg3wXXWXZXDioYJd3NhvKriqgpfQ%40mail.gmail.com
Commit 4656e3d66 replaced the "#define CLOBBER_CACHE_ALWAYS"
testing mechanism with a GUC, which has been a great help for
doing cache-clobber testing in more efficient ways; but there
is a gap in the implementation. The only way to do cache-clobber
testing during an initdb run is to use the old method with #define,
because one can't set the GUC from outside. Improve this by
adding a switch to initdb for the purpose.
(Perhaps someday we should let initdb pass through arbitrary
"-c NAME=VALUE" switches. Quoting difficulties dissuaded me
from attempting that right now, though.)
Back-patch to v14 where 4656e3d66 came in.
Discussion: https://postgr.es/m/1582507.1624227029@sss.pgh.pa.us
Instead use the common/int.h functions to check for integer overflow
in a more C-standard-compliant fashion. This is motivated by recent
failures on buildfarm member moonjelly, where it appears that
development-tip gcc is optimizing without regard to the -fwrapv
switch. Presumably that's a gcc bug that will be fixed soon, but
we might as well install cleaner coding here rather than wait.
(This does not address the question of whether we'll ever be able
to get rid of using -fwrapv. Testing shows that this spot is the
only place where doing so creates visible regression test failures,
but unfortunately that proves very little.)
Back-patch to v12. The common/int.h functions exist in v11, but
that branch doesn't use them in any client-side code. I judge
that this case isn't interesting enough in the real world to take
even a small risk of issues from being the first such use.
Tom Lane and Fabien Coelho
Discussion: https://postgr.es/m/73927.1624815543@sss.pgh.pa.us
002_pgbench_no_server was printing some array pointers instead of the
actual contents of those arrays for the expected outputs of stdout and
stderr for a tested command. This does not add any new information that
can help with debugging as the test names allow to track failure
locations, if any.
This commit simply removes those logs as the rest of the printed
information is redundant with command_checks_all().
Per discussion with Andrew Dunstan and Álvaro Herrera.
Discussion: https://postgr.es/m/YNXNFaG7IgkzZanD@paquier.xyz
Backpatch-through: 11
This fixes a couple of problems within the so-said code of this commit
subject:
- Replace the use of open() with slurp_file(), fixing an issue reported
by buildfarm member fairywren whose perl installation keep around CRLF
characters, causing the matching patterns for the logs to fail.
- Remove the eval block, which is not really necessary.
This set of issues has come into light after fixing a different issue
with c13585fe, and this is wrong since this code has been introduced.
Reported-by: Andrew Dunstan, and buildfarm member fairywren
Author: Michael Paquier
Reviewed-by: Andrew Dunstan
Discussion: https://postgr.es/m/0f49303e-7784-b3ee-200b-cbf67be2eb9e@dunslane.net
Backpatch-through: 11
ALTER SUBSCRIPTION DROP PUBLICATION does not actually support
copy_data option, so remove it from tab completion.
Also, reword the error message that is thrown when all the
publications from a subscription are specified to be dropped.
Also, made few doc and cosmetic adjustments.
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddy@enterprisedb.com>
Reviewed-by: Japin Li <japinli@hotmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CALDaNm21RwsDzs4xj14ApteAF7auyyomHNnp+NEL-sH8m-jMvQ@mail.gmail.com
fairywren is not happy with the pattern checks introduced by c13585f.
I am not sure if this outlines a bug in pgbench or if the regex patterns
used in the tests are too restrictive for this buildfarm member's
environment. This adds more debugging information to show the log
entries that do not match with the expected pattern, to help in finding
out what's happening. That seems like a good addition in the long-term
anyway as that may not be the only issue in this area.
Discussion: https://postgr.es/m/YNUad2HvgW+6eXyo@paquier.xyz
The logic checking for the format of per-thread logs used grep() with
directly "$re", which would cause the test to consider all the logs as
a match without caring about their format at all. Using "/$re/" makes
grep() perform a regex test, which is what we want here.
While on it, improve some of the tests to be more picky with the
patterns expected and add more comments to describe the tests.
Issue discovered while digging into a separate patch.
Author: Fabien Coelho, Michael Paquier
Discussion: https://postgr.es/m/YNPsPAUoVDCpPOGk@paquier.xyz
Backpatch-through: 11
Generalize the INDEX_CLEANUP VACUUM parameter (and the corresponding
reloption): make it into a ternary style boolean parameter. It now
exposes a third option, "auto". The "auto" option (which is now the
default) enables the "bypass index vacuuming" optimization added by
commit 1e55e7d1.
"VACUUM (INDEX_CLEANUP TRUE)" is redefined to once again make VACUUM
simply do any required index vacuuming, regardless of how few dead
tuples are encountered during the first scan of the target heap relation
(unless there are exactly zero). This gives users a way of opting out
of the "bypass index vacuuming" optimization, if for whatever reason
that proves necessary. It is also expected to be used by PostgreSQL
developers as a testing option from time to time.
"VACUUM (INDEX_CLEANUP FALSE)" does the same thing as it always has: it
forcibly disables both index vacuuming and index cleanup. It's not
expected to be used much in PostgreSQL 14. The failsafe mechanism added
by commit 1e55e7d1 addresses the same problem in a simpler way.
INDEX_CLEANUP can now be thought of as a testing and compatibility
option.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CAH2-WznrBoCST4_Gxh_G9hA8NzGUbeBGnOUC8FcXcrhqsv6OHQ@mail.gmail.com
Commit 547f04e73 caused pgbench to start printing its version number,
which seems like a fine idea, but it needs a bit more work:
* Print the server version number too, when different.
* Print the PG_VERSION string, not some reconstructed approximation.
This patch copies psql's well-tested code for the same purpose.
Discussion: https://postgr.es/m/1226654.1624036821@sss.pgh.pa.us
Recent glibc versions have made mktime() fail if tm_isdst is
inconsistent with the prevailing timezone; in particular it fails for
tm_isdst = 1 when the zone is UTC. (This seems wildly inconsistent
with the POSIX-mandated treatment of "incorrect" values for the other
fields of struct tm, so if you ask me it's a bug, but I bet they'll
say it's intentional.) This has been observed to cause cosmetic
problems when pg_restore'ing an archive created in a different
timezone.
To fix, do mktime() using the field values from the archive, and if
that fails try again with tm_isdst = -1. This will give a result
that's off by the UTC-offset difference from the original zone, but
that was true before, too. It's not terribly critical since we don't
do anything with the result except possibly print it. (Someday we
should flush this entire bit of logic and record a standard-format
timestamp in the archive instead. That's not okay for a back-patched
bug fix, though.)
Also, guard our only other use of mktime() by having initdb's
build_time_t() set tm_isdst = -1 not 0. This case could only have
an issue in zones that are DST year-round; but I think some do exist,
or could in future.
Per report from Wells Oliver. Back-patch to all supported
versions, since any of them might need to run with a newer glibc.
Discussion: https://postgr.es/m/CAOC+FBWDhDHO7G-i1_n_hjRzCnUeFO+H-Czi1y10mFhRWpBrew@mail.gmail.com
We've accumulated quite a mix of instances of "an SQL" and "a SQL" in the
documents. It would be good to be a bit more consistent with these.
The most recent version of the SQL standard I looked at seems to prefer
"an SQL". That seems like a good lead to follow, so here we change all
instances of "a SQL" to become "an SQL". Most instances correctly use
"an SQL" already, so it also makes sense to use the dominant variation in
order to minimise churn.
Additionally, there were some other abbreviations that needed to be
adjusted. FSM, SSPI, SRF and a few others. Also fix some pronounceable,
abbreviations to use "a" instead of "an". For example, "a SASL" instead
of "an SASL".
Here I've only adjusted the documents and error messages. Many others
still exist in source code comments. Translator hint comments seem to be
the biggest culprit. It currently does not seem worth the churn to change
these.
Discussion: https://postgr.es/m/CAApHDvpML27UqFXnrYO1MJddsKVMQoiZisPvsAGhKE_tsKXquw%40mail.gmail.com
Commit 2453ea142 redefined pg_proc.proargtypes to include the types of
OUT parameters, for procedures only. While that had some advantages
for implementing the SQL-spec behavior of DROP PROCEDURE, it was pretty
disastrous from a number of other perspectives. Notably, since the
primary key of pg_proc is name + proargtypes, this made it possible to
have multiple procedures with identical names + input arguments and
differing output argument types. That would make it impossible to call
any one of the procedures by writing just NULL (or "?", or any other
data-type-free notation) for the output argument(s). The change also
seems likely to cause grave confusion for client applications that
examine pg_proc and expect the traditional definition of proargtypes.
Hence, revert the definition of proargtypes to what it was, and
undo a number of complications that had been added to support that.
To support the SQL-spec behavior of DROP PROCEDURE, when there are
no argmode markers in the command's parameter list, we perform the
lookup both ways (that is, matching against both proargtypes and
proallargtypes), succeeding if we get just one unique match.
In principle this could result in ambiguous-function failures
that would not happen when using only one of the two rules.
However, overloading of procedure names is thought to be a pretty
rare usage, so this shouldn't cause many problems in practice.
Postgres-specific code such as pg_dump can defend against any
possibility of such failures by being careful to specify argmodes
for all procedure arguments.
This also fixes a few other bugs in the area of CALL statements
with named parameters, and improves the documentation a little.
catversion bump forced because the representation of procedures
with OUT arguments changes.
Discussion: https://postgr.es/m/3742981.1621533210@sss.pgh.pa.us
The set of subcommands supported by \dAp, \do and \dy was described
incorrectly in psql's --help. The documentation was already consistent
with the code.
Reported-by: inoas, from IRC
Author: Matthijs van der Vleuten
Reviewed-by: Neil Chen
Discussion: https://postgr.es/m/6a984e24-2171-4039-9050-92d55e7b23fe@www.fastmail.com
Backpatch-through: 9.6
An incorrectly-encoded multibyte character near the end of a string
could cause various processing loops to run past the string's
terminating NUL, with results ranging from no detectable issue to
a program crash, depending on what happens to be in the following
memory.
This isn't an issue in the server, because we take care to verify
the encoding of strings before doing any interesting processing
on them. However, that lack of care leaked into client-side code
which shouldn't assume that anyone has validated the encoding of
its input.
Although this is certainly a bug worth fixing, the PG security team
elected not to regard it as a security issue, primarily because
any untrusted text should be sanitized by PQescapeLiteral or
the like before being incorporated into a SQL or psql command.
(If an app fails to do so, the same technique can be used to
cause SQL injection, with probably much more dire consequences
than a mere client-program crash.) Those functions were already
made proof against this class of problem, cf CVE-2006-2313.
To fix, invent PQmblenBounded() which is like PQmblen() except it
won't return more than the number of bytes remaining in the string.
In HEAD we can make this a new libpq function, as PQmblen() is.
It seems imprudent to change libpq's API in stable branches though,
so in the back branches define PQmblenBounded as a macro in the files
that need it. (Note that just changing PQmblen's behavior would not
be a good idea; notably, it would completely break the escaping
functions' defense against this exact problem. So we just want a
version for those callers that don't have any better way of handling
this issue.)
Per private report from houjingyi. Back-patch to all supported branches.
The previous arrangement was just one big list, and the internal order
was not all consistent either. Now arrange the options by group and
sort them, the way it's already done in the --help output and one
other reference pages. Also fix some ordering in the --help output.
Fix a few places that were using appendStringInfo() when they should have
been using appendStringInfoString(). Also some cases of
appendPQExpBuffer() that would have been better suited to use
appendPQExpBufferChar(), and finally, some places that used
appendPQExpBuffer() when appendPQExpBufferStr() would have suited better.
There are no bugs are being fixed here. The aim is just to make the code
use the most optimal function for the job.
All the code being changed here is new to PG14. It makes sense to fix
these before we branch for PG15. There are a few other places that we
could fix, but those cases are older code so fixing those seems less
worthwhile as it may cause unnecessary back-patching pain in the future.
Author: Hou Zhijie
Discussion: https://postgr.es/m/OS0PR01MB5716732158B1C4142C6FE375943D9@OS0PR01MB5716.jpnprd01.prod.outlook.com
Redefine '\0' (InvalidCompressionMethod) as meaning "if we need to
compress, use the current setting of default_toast_compression".
This allows '\0' to be a suitable default choice regardless of
datatype, greatly simplifying code paths that initialize tupledescs
and the like. It seems like a more user-friendly approach as well,
because now the default compression choice doesn't migrate into table
definitions, meaning that changing default_toast_compression is
usually sufficient to flip an installation's behavior; one needn't
tediously issue per-column ALTER SET COMPRESSION commands.
Along the way, fix a few minor bugs and documentation issues
with the per-column-compression feature. Adopt more robust
APIs for SetIndexStorageProperties and GetAttributeCompression.
Bump catversion because typical contents of attcompression will now
be different. We could get away without doing that, but it seems
better to ensure v14 installations all agree on this. (We already
forced initdb for beta2, anyway.)
Discussion: https://postgr.es/m/626613.1621787110@sss.pgh.pa.us
The error messages, docs, and one of the options were using
'parallel degree' to indicate parallelism used by vacuum command. We
normally use 'parallel workers' at other places so change it for parallel
vacuum accordingly.
Author: Bharath Rupireddy
Reviewed-by: Dilip Kumar, Amit Kapila
Backpatch-through: 13
Discussion: https://postgr.es/m/CALj2ACWz=PYrrFXVsEKb9J1aiX4raA+UBe02hdRp_zqDkrWUiw@mail.gmail.com
"typename" is a C++ keyword, so pg_upgrade.h fails to compile in C++.
Fortunately, there seems no likely reason for somebody to need to
do that. Nonetheless, it's project policy that all .h files should
pass cpluspluscheck, so rename the argument to fix that.
Oversight in 57c081de0; back-patch as that was. (The policy requiring
pg_upgrade.h to pass cpluspluscheck only goes back to v12, but it
seems best to keep this code looking the same in all branches.)
One of the tests for the pgbench permute() function added by
6b258e3d68 fails on some 32-bit platforms, due to variations in the
floating point computations in getrand(). The remaining tests give
sufficient coverage, so just remove the failing test.
Reported by Christoph Berg. Analysis by Thomas Munro and Tom Lane.
Based on patch by Fabien Coelho.
Discussion: https://postgr.es/m/YKQnUoYV63GRJBDD@msg.df7cb.de
This is an oversight from bbe0a81d, where the equivalent option exists
in pg_dump. This is useful to be able to reset the compression methods
cluster-wide when restoring the data based on default_toast_compression.
Reviewed-by: Daniel Gustafsson, Tom Lane
Discussion: https://postgr.es/m/YKHC+qCJvzCRVCpY@paquier.xyz
When specified directly as DML queries, INSERT was not getting always
completed to "INSERT INTO", same for DELETE with "DELETE FROM". This
makes the completion behavior more consistent for both commands, saving
a few keystrokes.
Commands on policies, triggers, grant/revoke, etc. require only DELETE
as completion keyword.
Author: Haiying Tang
Reviewed-by: Dilip Kumar, Julien Rouhaud
Discussion: https://postgr.es/m/OS0PR01MB61135AE2B07CCD1AB8C6A0F6FB549@OS0PR01MB6113.jpnprd01.prod.outlook.com
Also "make reformat-dat-files".
The only change worthy of note is that pgindent messed up the formatting
of launcher.c's struct LogicalRepWorkerId, which led me to notice that
that struct wasn't used at all anymore, so I just took it out.
This set of commits has some bugs with known fixes, but at this late
stage in the release cycle it seems best to revert and resubmit next
time, along with some new automated test coverage for this whole area.
Commits reverted:
dc88460c: Doc: Review for "Optionally prefetch referenced data in recovery."
1d257577: Optionally prefetch referenced data in recovery.
f003d9f8: Add circular WAL decoding buffer.
323cbe7c: Remove read_page callback from XLogReader.
Remove the new GUC group WAL_RECOVERY recently added by a55a9847, as the
corresponding section of config.sgml is now reverted.
Discussion: https://postgr.es/m/CAOuzzgrn7iKnFRsB4MHp3UisEQAGgZMbk_ViTN4HV4-Ksq8zCg%40mail.gmail.com
Some relations with LZ4 used as the toast compression methods have been
left around in the main regression test suite to stress pg_upgrade, but
pg_dump, that includes tests much more picky in terms of output
generated, had no actual coverage with this feature.
Similarly to collations, tests only working with LZ4 are tracked with an
additional flag, and this uses TestLib::check_pg_config() to check if
the build supports LZ4 or not. This stresses more scenarios with
tables, materialized views and pg_dump --no-toast-compression.
Author: Dilip Kumar
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CAFiTN-twgPmohG7qj1HXhySq16h123y5OowsQR+5h1YeZE9fmQ@mail.gmail.com
Design problems were discovered in the handling of composite types and
record types that would cause some relevant versions not to be recorded.
Misgivings were also expressed about the use of the pg_depend catalog
for this purpose. We're out of time for this release so we'll revert
and try again.
Commits reverted:
1bf946bd: Doc: Document known problem with Windows collation versions.
cf002008: Remove no-longer-relevant test case.
ef387bed: Fix bogus collation-version-recording logic.
0fb0a050: Hide internal error for pg_collation_actual_version(<bad OID>).
ff942057: Suppress "warning: variable 'collcollate' set but not used".
d50e3b1f: Fix assertion in collation version lookup.
f24b1569: Rethink extraction of collation dependencies.
257836a7: Track collation versions for indexes.
cd6f479e: Add pg_depend.refobjversion.
7d1297df: Remove pg_collation.collversion.
Discussion: https://postgr.es/m/CA%2BhUKGLhj5t1fcjqAu8iD9B3ixJtsTNqyCCD4V0aTO9kAKAjjA%40mail.gmail.com
Tom Lane
Peter Eisentraut
Magnus Hagander
Noah Misch
Daniel Gustafsson
Peter Geoghegan
Michael Paquier
Fujii Masao
Alexander Korotkov
Tomas Vondra
Alvaro Herrera
Amit Kapila
Andres Freund
Bruce Momjian
Andrew Dunstan
Thomas Munro
David Rowley
Dean Rasheed