Gen_fmgrtab.pl creates a new file fmgrprotos.h, which contains
prototypes for all functions registered in pg_proc.h. This avoids
having to manually maintain these prototypes across a random variety of
header files. It also automatically enforces a correct function
signature, and since there are warnings about missing prototypes, it
will detect functions that are defined but not registered in
pg_proc.h (or otherwise used).
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
The operators money*int8, int8*money, and money/int8 were implemented in
code but not registered in pg_operator or pg_proc.
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Between 6eeb95f0f5 and
7b1c2a0f20, builtins.h contained
additional prototypes that have now been moved elsewhere, so we don't
need to include nodes/parsenodes.h anymore.
Fix some files that were relying on builtins.h implicitly pulling in
some unrelated stuff they needed.
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Previously multiple sessions could execute pg_start_backup() and
pg_stop_backup() to start and stop an exclusive backup at the same time.
This could trigger the assertion failure of
"FailedAssertion("!(XLogCtl->Insert.exclusiveBackup)".
This happend because, even while pg_start_backup() was starting
an exclusive backup, other session could run pg_stop_backup()
concurrently and mark the backup as not-in-progress unconditionally.
This patch introduces ExclusiveBackupState indicating the state of
an exclusive backup. This state is used to ensure that there is only
one session running pg_start_backup() or pg_stop_backup() at
the same time, to avoid the assertion failure.
Back-patch to all supported versions.
Author: Michael Paquier
Reviewed-By: Kyotaro Horiguchi and me
Reported-By: Andreas Seltenreich
Discussion: <87mvktojme.fsf@credativ.de>
INSERT ... VALUES with a single VALUES row is implemented quite differently
from the general VALUES case. A user-visible implication of that is that
we accept SRFs in the single-row case, but not in the multi-row case.
That's a historical artifact no doubt, but in view of the lack of field
complaints, I'm not excited about fixing it right now.
However, check_srf_call_placement() needs to know about this, first because
it should throw an error in the unsupported case, and second because it
should set p_hasTargetSRFs in the single-row case (because we treat that
like a SELECT tlist). That's an oversight in commit a4c35ea1c.
To fix, split EXPR_KIND_VALUES into two values. So far as I can see,
this is the only place where we need to distinguish the two cases at
present; but there might be more later.
Patch by me, per report from Andres Freund.
Discussion: https://postgr.es/m/20170116081548.zg63zltblwimpfgp@alap3.anarazel.de
Temporary replication slots will be used by default when wal streaming
is used and no slot name is specified with -S. If a slot name is
specified, then a permanent slot with that name is used. If --no-slot is
specified, then no permanent or temporary slot will be used.
Temporary slots are only used on 10.0 and newer, of course.
Normally, if we have a WHERE clause like "indexcol = constant",
the planner will figure out that that index column can be ignored
when determining whether the index has a desired sort ordering.
But this failed to work for boolean index columns, because a
condition like "boolcol = true" is canonicalized to just "boolcol"
which does not give rise to an EquivalenceClass. Add a check to
allow the same type of deduction to be made in this case too.
Per a complaint from Dima Pavlov. Arguably this is a bug, but given the
limited impact and the small number of complaints so far, I won't risk
destabilizing plans in stable branches by back-patching.
Patch by me, reviewed by Michael Paquier
Discussion: https://postgr.es/m/1788.1481605684@sss.pgh.pa.us
This patch makes several changes that improve the consistency of
representation of lists of statements. It's always been the case
that the output of parse analysis is a list of Query nodes, whatever
the types of the individual statements in the list. This patch brings
similar consistency to the outputs of raw parsing and planning steps:
* The output of raw parsing is now always a list of RawStmt nodes;
the statement-type-dependent nodes are one level down from that.
* The output of pg_plan_queries() is now always a list of PlannedStmt
nodes, even for utility statements. In the case of a utility statement,
"planning" just consists of wrapping a CMD_UTILITY PlannedStmt around
the utility node. This list representation is now used in Portal and
CachedPlan plan lists, replacing the former convention of intermixing
PlannedStmts with bare utility-statement nodes.
Now, every list of statements has a consistent head-node type depending
on how far along it is in processing. This allows changing many places
that formerly used generic "Node *" pointers to use a more specific
pointer type, thus reducing the number of IsA() tests and casts needed,
as well as improving code clarity.
Also, the post-parse-analysis representation of DECLARE CURSOR is changed
so that it looks more like EXPLAIN, PREPARE, etc. That is, the contained
SELECT remains a child of the DeclareCursorStmt rather than getting flipped
around to be the other way. It's now true for both Query and PlannedStmt
that utilityStmt is non-null if and only if commandType is CMD_UTILITY.
That allows simplifying a lot of places that were testing both fields.
(I think some of those were just defensive programming, but in many places,
it was actually necessary to avoid confusing DECLARE CURSOR with SELECT.)
Because PlannedStmt carries a canSetTag field, we're also able to get rid
of some ad-hoc rules about how to reconstruct canSetTag for a bare utility
statement; specifically, the assumption that a utility is canSetTag if and
only if it's the only one in its list. While I see no near-term need for
relaxing that restriction, it's nice to get rid of the ad-hocery.
The API of ProcessUtility() is changed so that what it's passed is the
wrapper PlannedStmt not just the bare utility statement. This will affect
all users of ProcessUtility_hook, but the changes are pretty trivial; see
the affected contrib modules for examples of the minimum change needed.
(Most compilers should give pointer-type-mismatch warnings for uncorrected
code.)
There's also a change in the API of ExplainOneQuery_hook, to pass through
cursorOptions instead of expecting hook functions to know what to pick.
This is needed because of the DECLARE CURSOR changes, but really should
have been done in 9.6; it's unlikely that any extant hook functions
know about using CURSOR_OPT_PARALLEL_OK.
Finally, teach gram.y to save statement boundary locations in RawStmt
nodes, and pass those through to Query and PlannedStmt nodes. This allows
more intelligent handling of cases where a source query string contains
multiple statements. This patch doesn't actually do anything with the
information, but a follow-on patch will. (Passing this information through
cleanly is the true motivation for these changes; while I think this is all
good cleanup, it's unlikely we'd have bothered without this end goal.)
catversion bump because addition of location fields to struct Query
affects stored rules.
This patch is by me, but it owes a good deal to Fabien Coelho who did
a lot of preliminary work on the problem, and also reviewed the patch.
Discussion: https://postgr.es/m/alpine.DEB.2.20.1612200926310.29821@lancre
A client copy can't work inside a function because the FE/BE wire protocol
doesn't support nesting of a COPY operation within query results. (Maybe
it could, but the protocol spec doesn't suggest that clients should support
this, and libpq for one certainly doesn't.)
In most PLs, this prohibition is enforced by spi.c, but SQL functions don't
use SPI. A comparison of _SPI_execute_plan() and init_execution_state()
shows that rejecting client COPY is the only discrepancy in what they
allow, so there's no other similar bugs.
This is an astonishingly ancient oversight, so back-patch to all supported
branches.
Report: https://postgr.es/m/BY2PR05MB2309EABA3DEFA0143F50F0D593780@BY2PR05MB2309.namprd05.prod.outlook.com
This changes the default values of the following parameters:
wal_level = replica
max_wal_senders = 10
max_replication_slots = 10
in order to make it possible to make a backup and set up simple
replication on the default settings, without requiring a system restart.
Discussion: https://postgr.es/m/CABUevEy4PR_EAvZEzsbF5s+V0eEvw7shJ2t-AUwbHOjT+yRb3A@mail.gmail.com
Reviewed by Peter Eisentraut. Benchmark help from Tomas Vondra.
The different actions in pg_ctl had different defaults for -w and -W,
mostly for historical reasons. Most users will want the -w behavior, so
make that the default.
Remove the -w option in most example and test code, so avoid confusion
and reduce verbosity. pg_upgrade is not touched, so it can continue to
work with older installations.
Reviewed-by: Beena Emerson <memissemerson@gmail.com>
Reviewed-by: Ryan Murphy <ryanfmurphy@gmail.com>
Various example and test code used -m fast explicitly, but since it's
the default, this can be omitted now or should be replaced by a better
example.
pg_upgrade is not touched, so it can continue to operate with older
installations.
Commit 0563a3a8b just introduced another instance of the same unsafe
testing methodology that appeared in 2ac3ef7a0, which I corrected in
257d81572. Robert/Amit, please stop doing that.
Also look through the rest of f0e44751d's test cases, and correct some
other queries with underdetermined ordering of results from the system
catalogs. These haven't failed in the buildfarm yet, but I don't
have any confidence in that staying true.
Per multiple buildfarm members.
This fixes a portability issue introduced by commit 961bed020: with a
compiler that doesn't support PG_FUNCNAME_MACRO, the "funcname" field of
errorCode won't be provided, leading to a failure of the unset command.
I added -nocomplain to the unset commands for filename and lineno too, just
in case, though I know of no platform that wouldn't populate those fields.
(BTW, -nocomplain is new in Tcl 8.4, but fortunately we dropped support
for pre-8.4 Tcl some time ago.)
Per buildfarm member pademelon.
In 9.5, the default pg_ctl stop mode was changed from "smart" to "fast".
pg_upgrade still thought the default mode was "smart" and only specified
the mode when "fast" was asked for. This results in using "fast" all
the time. It's not clear what the effect in practice is, but fix it
nonetheless to restore the previous behavior.
Move the code for doing parent attnos to child attnos mapping for Vars
in partition constraint expressions to a separate function
map_partition_varattnos() and call it from the appropriate places.
Doing it in get_qual_from_partbound(), as is now, would produce wrong
result in certain multi-level partitioning cases, because it only
considers the current pair of parent-child relations. In certain
multi-level partitioning cases, attnums for the same key attribute(s)
might differ between various levels causing the same attribute to be
numbered differently in different instances of the Var corresponding
to a given attribute.
With this commit, in generate_partition_qual(), we first generate the
the whole partition constraint (considering all levels of partitioning)
and then do the mapping, so that Vars in the final expression are
numbered according the leaf relation (to which it is supposed to apply).
Amit Langote, reviewed by me.
For a partial path, the cardinality estimate needs to reflect the
number of rows we think each worker will see, rather than the total
number of rows; otherwise, costing will go wrong. The previous coding
got this completely wrong for parallel joins.
Unfortunately, this change may destabilize plans for users of 9.6 who
have enabled parallel query, but since 9.6 is still fairly new I'm
hoping expectations won't be too settled yet. Also, this is really a
brown-paper-bag bug, so leaving it unfixed for the entire lifetime of
9.6 seems unwise.
Related reports (whose import I initially failed to recognize) by
Tomas Vondra and Tom Lane.
Discussion: http://postgr.es/m/CA+TgmoaDxZ5z5Kw_oCQoymNxNoVaTCXzPaODcOuao=CzK8dMZw@mail.gmail.com
Somebody failed to grasp the point of having the #ifdef CATCACHE_STATS
fields at the end of the struct. Put that back the way it should be,
and add a comment making it more explicit why it should be that way.
pg_restore will currently accept invalid values for the number of
parallel jobs to run (eg: -1), unlike pg_dump which does check that the
value provided is reasonable.
Worse, '-1' is actually a valid, independent, parameter (as an alias for
--single-transaction), leading to potentially completely unexpected
results from a command line such as:
-> pg_restore -j -1
Where a user would get neither parallel jobs nor a single-transaction.
Add in validity checking of the parallel jobs option, as we already have
in pg_dump, before we try to open up the archive. Also move the check
that we haven't been asked to run more parallel jobs than possible on
Windows to the same place, so we do all the option validity checking
before opening the archive.
Back-patch all the way, though for 9.2 we're adding the Windows-specific
check against MAXIMUM_WAIT_OBJECTS as that check wasn't back-patched
originally.
Discussion: https://www.postgresql.org/message-id/20170110044815.GC18360%40tamriel.snowman.net
The previous --path documentation and --help output were wrong in both
its meaning and the defaults.
Reviewed-by: Michael Paquier
Backpatch-through: 9.6
When using pg_dump --strict-names and a schema pattern which doesn't
match any schemas (eg: --schema='nonexistant*'), we were incorrectly
throwing an error claiming no tables were found when, really, there
were no schemas found:
-> pg_dump --strict-names --schema='nonexistant*'
pg_dump: no matching tables were found for pattern "nonexistant*"
Fix that by changing the error message to say 'schemas' instead, since
that is what we are actually complaining about.
Noticed while testing pg_dump error cases.
Back-patch to 9.6 where --strict-names and this error message were
introduced.
Instead of relying on the page contents to know whether we have
advanced from the primary bucket page to an overflow page, track
that explicitly.
Amit Kapila, per a complaint by me.
Including the program name twice is not helpful:
-> pg_dump -j -1
pg_dump: pg_dump: invalid number of parallel jobs
Correct by removing the progname from the exit_horribly() call used when
validating the number of parallel jobs.
Noticed while testing various pg_dump error cases.
Back-patch to 9.3 where parallel pg_dump was added.
We can't throw elog(ERROR) out of a Tcl command procedure; we have
to catch the error and return TCL_ERROR to the Tcl interpreter.
pltcl_returnnext failed to meet this requirement, so that errors
detected by pltcl_build_tuple_result or other functions called here
led to longjmp'ing out of the Tcl interpreter and thereby leaving it
in a bad state. Use the existing subtransaction support to prevent
that. Oversight in commit 26abb50c4, found more or less accidentally
by the buildfarm thanks to the tests added in 961bed020.
Report: https://postgr.es/m/30647.1483989734@sss.pgh.pa.us
If inherited tables don't have exactly the same schema, the USING clause
in an ALTER TABLE / SET DATA TYPE misbehaves when applied to the
children tables since commit 9550e8348b. Starting with that commit,
the attribute numbers in the USING expression are fixed during parse
analysis. This can lead to bogus errors being reported during
execution, such as:
ERROR: attribute 2 has wrong type
DETAIL: Table has type smallint, but query expects integer.
Since it wouldn't do to revert to the original coding, we now apply a
transformation to map the attribute numbers to the correct ones for each
child.
Reported by Justin Pryzby
Analysis by Tom Lane; patch by me.
Discussion: https://postgr.es/m/20170102225618.GA10071@telsasoft.com
... and therefore we ought not to tell XLogRegisterBuffer the opposite,
when writing XLog for a brin update that moves the index tuple to a
different page. Otherwise, xlog insertion would try to "compress the
hole" when producing a full-page image for it; but since we don't update
pd_lower/upper, the hole covers the whole page. On WAL replay, the
revmap page becomes empty and so the entire portion of the index is
useless and needs to be recomputed.
This is low-probability: a BRIN update only moves an index tuple to a
different page when the summary tuple is larger than the existing one,
which doesn't happen with fixed-width datatypes. Also, the revmap
page must be first after a checkpoint.
Report and patch: Kuntal Ghosh
Bug is alleged to have detected by a WAL-consistency-checking tool.
Discussion: https://postgr.es/m/CAGz5QCJ=00UQjScSEFbV=0qO5ShTZB9WWz_Fm7+Wd83zPs9Geg@mail.gmail.com
I posted a test case demonstrating the problem, but I'm refraining from
adding it to the test suite; if the WAL consistency tool makes it in,
that will be a better way to catch this from regressing. (We should
definitely have someting that causes not-same-page updates, though.)
I noticed that p_value_substitute, which is a single-purpose kluge I added
in 2002 (commit b0422b215), could be replaced by having domainAddConstraint
install a parser hook that looks for the name "value". The parser hook
code only dates back to 2009, so it's not surprising that we had to kluge
this in 2002, but we can do it more cleanly now.
I got annoyed about how some fields of ParseState were documented in the
struct's block comment and some weren't; not all of the latter are trivial.
Fix that. Also reorder a couple of fields that seem to have been placed
rather randomly, or maybe with an idea of avoiding padding space; but there
are never so many ParseStates in existence at one time that we ought to
value pad space over readability.
For reasons unknown, pg_dumpall and pg_restore managed to escape the
basic set of TAP tests that were added for pg_dump in 6bd356c3, so
let's get them added now. A few minor adjustments are also made to the
dump/restore tests to improve code coverage for pg_restore/pg_dumpall.
Make pltcl_trigger_handler() construct modified tuples using
pltcl_build_tuple_result(), rather than its own copy of essentially
the same logic. This results in slightly different message wording for
the error cases, and in one case a different SQLSTATE, but it seems
unlikely that any existing applications are depending on any of those
details.
While at it, fix a typo in commit 26abb50c4: pltcl_build_tuple_result was
applying encoding conversion in the wrong direction. That would be a
back-patchable bug fix, except the code hasn't shipped yet.
Jim Nasby, reviewed by me
Discussion: https://postgr.es/m/d2c6425a-d9e0-f034-f774-4a872c234d89@BlueTreble.com
findTableByOid() is allowed to return NULL and we should therefore be
checking for that case. getOwnedSeqs() and dumpSequence() shouldn't
ever actually see this happen, but given odd circumstances it might and
commit f9e439b1 probably shouldn't have removed that check.
Pointed out by Coverity. Initial patch from Michael Paquier.
Back-patch to 9.6, where that commit had removed the check.
This fixes problems where a plan must change but fails to do so,
as seen in a bug report from Rajkumar Raghuwanshi.
For ALTER FOREIGN TABLE OPTIONS, do this through the standard method of
forcing a relcache flush on the table. For ALTER FOREIGN DATA WRAPPER
and ALTER SERVER, just flush the whole plan cache on any change in
pg_foreign_data_wrapper or pg_foreign_server. That matches the way
we handle some other low-probability cases such as opclass changes, and
it's unclear that the case arises often enough to be worth working harder.
Besides, that gives a patch that is simple enough to back-patch with
confidence.
Back-patch to 9.3. In principle we could apply the code change to 9.2 as
well, but (a) we lack postgres_fdw to test it with, (b) it's doubtful that
anyone is doing anything exciting enough with FDWs that far back to need
this desperately, and (c) the patch doesn't apply cleanly.
Patch originally by Amit Langote, reviewed by Etsuro Fujita and Ashutosh
Bapat, who each contributed substantial changes as well.
Discussion: https://postgr.es/m/CAKcux6m5cA6rRPTKkqVdJ-R=KKDfe35Q_ZuUqxDSV_4hwga=og@mail.gmail.com
This commit purported to use a variable hash seed for Partial
HashAggregate, but actually did the opposite - it made us use a
variable seed for any HashAggregate that is NOT partial. Woops.
Commit 4aec49899e reorganized the order
of operations here so that we no longer increment the number of "extra
waits" before locking the semaphore, but it did not change the
starting value of extraWaits from 0 to -1 to compensate. In the worst
case, this could leak a semaphore count, but that seems to be unlikely
in practice.
Discussion: http://postgr.es/m/CAA4eK1JyVqXiMba+-a589Rk0pyHsyKkGxeumVKjU6Y74hdrVLQ@mail.gmail.com
Amit Kapila, per an off-list report by Dilip Kumar. Reviewed by me.
With the old code, a backend that read pg_stat_activity without ever
having executed a parallel query might see a backend in the midst of
executing one waiting on a DSA LWLock, resulting in a crash. The
solution is for backends to register the tranche at startup time, not
the first time a parallel query is executed.
Report by Andreas Seltenreich. Patch by me, reviewed by Thomas Munro.
array_fill(..., array[0]) produced an empty array, which is probably
what users expect, but it was a one-dimensional zero-length array
which is not our standard representation of empty arrays. Also, for
no very good reason, it rejected empty input arrays; that case should
be allowed and produce an empty output array.
In passing, remove the restriction that the input array(s) have lower
bound 1. That seems rather pointless, and it would have needed extra
complexity to make the check deal with empty input arrays.
Per bug #14487 from Andrew Gierth. It's been broken all along, so
back-patch to all supported branches.
Discussion: https://postgr.es/m/20170105152156.10135.64195@wrigleys.postgresql.org
Inheritance operations must treat the OID column, if any, much like
regular user columns. But MergeAttributesIntoExisting() neglected to
do that, leading to weird results after a table with OIDs is associated
to a parent with OIDs via ALTER TABLE ... INHERIT.
Report and patch by Amit Langote, reviewed by Ashutosh Bapat, some
adjustments by me. It's been broken all along, so back-patch to
all supported branches.
Discussion: https://postgr.es/m/cb13cfe7-a48c-5720-c383-bb843ab28298@lab.ntt.co.jp
RelationGetPartitionQual() and generate_partition_qual() are always
called with recurse = true, so we don't need an argument for that.
Extracted by me from a larger patch by Amit Langote.
After a tuple is routed to a partition, it has been converted from the
root table's row type to the partition's row type. ExecConstraints
needs to report the failure using the original tuple and the parent's
tuple descriptor rather than the ones for the selected partition.
Amit Langote
Allow pg_recvlogical to specify an ending LSN, complementing
the existing -—startpos=LSN option.
Craig Ringer, reviewed by Euler Taveira and Naoki Okano
configure can only probe the existence of gcc intrinsics, not how well
they're implemented, and unfortunately the answer is sometimes "badly".
In particular we've found that multiple compilers fail to implement
char-width __sync_lock_test_and_set() correctly on PPC; and even a correct
implementation would necessarily be pretty inefficient, since that hardware
has only a word-wide primitive to work with.
Given the knowledge we've accumulated in s_lock.h, it appears that it's
best to rely on int-width TAS operations on most non-Intel architectures.
Hence, pick int not char when both are nominally available to us in
generic-gcc.h (note that that code is not used for x86[_64]).
Back-patch to fix regression test failures on FreeBSD/PPC. Ordinarily
back-patching a change like this would be verboten because of ABI breakage.
But since pg_atomic_flag is not yet used in any Postgres data structure,
there's no ABI to break. It seems safer to back-patch to avoid possible
gotchas, if someday we do back-patch something that uses pg_atomic_flag.
Discussion: https://postgr.es/m/25414.1483076673@sss.pgh.pa.us
Commit 2ac3ef7a01 added a TupleTapleSlot
for partition tuple slot to EState (es_partition_tuple_slot) but it's
more logical to have it as part of ModifyTableState
(mt_partition_tuple_slot) and CopyState (partition_tuple_slot).
Discussion: http://postgr.es/m/1bd459d9-4c0c-197a-346e-e5e59e217d97@lab.ntt.co.jp
Amit Langote, per a gripe from me
Leave OpenSSL's default passphrase collection callback in place during
the first call of secure_initialize() in server startup. Although that
doesn't work terribly well in daemon contexts, some people feel we should
not break it for anyone who was successfully using it before. We still
block passphrase demands during SIGHUP, meaning that you can't adjust SSL
configuration on-the-fly if you used a passphrase, but this is no worse
than what it was before commit de41869b6. And we block passphrase demands
during EXEC_BACKEND reloads; that behavior wasn't useful either, but at
least now it's documented.
Tweak some related log messages for more readability, and avoid issuing
essentially duplicate messages about reload failure caused by a passphrase.
Discussion: https://postgr.es/m/29982.1483412575@sss.pgh.pa.us
The typical size of an LWLock is now 16 bytes even on 64-bit platforms,
and the size of slock_t is now irrelevant. But pg_atomic_uint32 can
(perhaps surprisingly) still be larger than 4 bytes, so there's still
some marginal point to allowing LWLOCK_MINIMAL_SIZE == 64.
Commit 008608b9d5 made the changes
that led to the need for these updates.
Add methods to the core test framework PostgresNode.pm to allow us to
test that standby nodes have caught up with the master, as well as
basic LSN handling. Used in tests recovery/t/001_stream_rep.pl and
recovery/t/004_timeline_switch.pl
Craig Ringer, reviewed by Aleksander Alekseev and Simon Riggs
The purpose of the test was to check access to the sequence relation on
a hot standby, so change the test to read a different column from the
sequence, instead of just reading the catalog.
From: Andreas Karlsson <andreas@proxel.se>
These files are deleted but not yet gone from the filesystem. Operations
on them will return ERROR_DELETE_PENDING.
With this we start treating that as ENOENT, meaning files does not
exist (which is the state it will soon reach). This should be safe in
every case except when we try to recreate a file with exactly the same
name. This is an operation that PostgreSQL does very seldom, so
hopefully that won't happen much -- and even if it does, this treatment
should be no worse than treating it as an unhandled error.
We've been un able to reproduce the bug reliably, so pushing this to
master to get buildfarm coverage and other testing. Once it's proven to
be stable, it should be considered for backpatching.
Discussion: https://postgr.es/m/20160712083220.1426.58667%40wrigleys.postgresql.org
Patch by me and Michael Paquier
Since streaming is now supported for all output formats, make this the
default as this is what most people want.
To get the old behavior, the parameter -X none can be specified to turn
it off.
This also removes the parameter -x for fetch, now requiring -X fetch to
be specified to use that.
Reviewed by Vladimir Rusinov, Michael Paquier and Simon Riggs
OpenSSL's default behavior when loading a passphrase-protected key file
is to open /dev/tty and demand the password from there. It was kinda
sorta okay to allow that to happen at server start, but really that was
never workable in standard daemon environments. And it was a complete
fail on Windows, where the same thing would happen at every backend launch.
Yesterday's commit de41869b6 put the final nail in the coffin by causing
that to happen at every SIGHUP; even if you've still got a terminal acting
as the server's TTY, having the postmaster freeze until you enter the
passphrase again isn't acceptable.
Hence, override the default behavior with a callback that returns an empty
string, ensuring failure. Change the documentation to say that you can't
have a passphrase-protected server key, period.
If we can think of a production-grade way of collecting a passphrase from
somewhere, we might do that once at server startup and use this callback
to feed it to OpenSSL, but it's far from clear that anyone cares enough
to invest that much work in the feature. The lack of complaints about
the existing fractionally-baked behavior suggests nobody's using it anyway.
Discussion: https://postgr.es/m/29982.1483412575@sss.pgh.pa.us
It is no longer necessary to restart the server to enable, disable,
or reconfigure SSL. Instead, we just create a new SSL_CTX struct
(by re-reading all relevant files) whenever we get SIGHUP. Testing
shows that this is fast enough that it shouldn't be a problem.
In conjunction with that, downgrade the logic that complains about
pg_hba.conf "hostssl" lines when SSL isn't active: now that's just
a warning condition not an error.
An issue that still needs to be addressed is what shall we do with
passphrase-protected server keys? As this stands, the server would
demand the passphrase again on every SIGHUP, which is certainly
impractical. But the case was only barely supported before, so that
does not seem a sufficient reason to hold up committing this patch.
Andreas Karlsson, reviewed by Michael Banck and Michael Paquier
Discussion: https://postgr.es/m/556A6E8A.9030400@proxel.se
The advantage of clock_gettime() is that the API allows the result to
be precise to nanoseconds, not just microseconds as in gettimeofday().
Now that it's routinely possible to do tens of plan node executions
in 1us, we really need more precision than gettimeofday() can offer
for EXPLAIN ANALYZE to accumulate statistics with.
Some research shows that clock_gettime() is available on pretty nearly
every modern Unix-ish platform, and as far as I have been able to test,
it has about the same execution time as gettimeofday(), so there's no
loss in switching over. (By the same token, this doesn't do anything
to fix the fact that we really wish clock readings were faster. But
there's enough win here to justify changing anyway.)
A small side benefit is that on most platforms, we can use CLOCK_MONOTONIC
instead of CLOCK_REALTIME and thereby render EXPLAIN impervious to
concurrent resets of the system clock. (This means that code must not
assume that the contents of struct instr_time have any well-defined
interpretation as timestamps, but really that was true before.)
Some platforms offer nonstandard clock IDs that might be of interest.
This patch knows we should use CLOCK_MONOTONIC_RAW on macOS, because it
provides more precision and is faster to read than their CLOCK_MONOTONIC.
If there turn out to be many more cases where we need special rules, it
might be appropriate to handle the selection of clock ID in configure,
but for the moment that doesn't seem worth the trouble.
Discussion: https://postgr.es/m/31856.1400021891@sss.pgh.pa.us
For aggregated logging, pg_bench supposed that printing the integer part of
INSTR_TIME_GET_DOUBLE() would produce a Unix timestamp. That was already
broken on Windows, and it's about to get broken on most other platforms as
well. As in commit 74baa1e3b, we can remove the entanglement at the price
of one extra syscall per transaction; though here it seems more convenient
to use time(NULL) instead of gettimeofday(), since we only need
integral-second precision.
I took the time to do some wordsmithing on the documentation about
pgbench's logging features, too.
Discussion: https://postgr.es/m/8837.1483216839@sss.pgh.pa.us
This code was presuming undue familiarity with the contents of the
instr_time struct. That was already broken on Windows, and it's about
to get broken on most other platforms as well. The simplest solution
that preserves the current output definition is to just do our own
gettimeofday() call here. Realistically, the extra cost is probably
negligible in comparison to everything else that's going on in a
pgbench transaction, so it's not worth sweating over.
On Windows, the precision delivered by gettimeofday() is lower than
one could wish, but this is still a big improvement over printing
zeroes, as the code did before.
Discussion: https://postgr.es/m/8837.1483216839@sss.pgh.pa.us
Commit 2ac3ef7a0 added a query with an underdetermined output row order;
it has failed multiple times in the buildfarm since then. Add an ORDER BY
to fix. Also, don't rely on a DROP CASCADE to drop in a well-determined
order; that hasn't failed yet but I don't trust it much, and we're not
saving any typing by using CASCADE anyway.
Commit f0e44751d added new node tags at a place in the tag numbering
where there was no daylight left before the next hard-coded number,
resulting in some duplicate tag assignments. This doesn't seem to have
caused any big problem so far, but it's surely trouble waiting to happen.
We could adjust the manually assigned breakpoints to make more room,
but that just leaves the same hazard waiting to strike again in future.
What seems like a better idea is to get rid of the manual assignments
and leave NodeTags to be automatically assigned, consecutively from one
on up. This means that any change in the tag list forces a backend-wide
recompile, but realistically that's usually needed anyway.
Discussion: https://postgr.es/m/29670.1482942811@sss.pgh.pa.us
Most code was casting this through a generic Node. By declaring
everything as RoleSpec appropriately, we can remove a bunch of casts and
ad-hoc node type checking.
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
interval_transform() contained two separate bugs that caused it to
sometimes mistakenly decide that a cast from interval to restricted
interval is a no-op and throw it away.
First, it was wrong to rely on dt.h's field type macros to have an
ordering consistent with the field's significance; in one case they do
not. This led to mistakenly treating YEAR as less significant than MONTH,
so that a cast from INTERVAL MONTH to INTERVAL YEAR was incorrectly
discarded.
Second, fls(1<<k) produces k+1 not k, so comparing its output directly
to SECOND was wrong. This led to supposing that a cast to INTERVAL
MINUTE was really a cast to INTERVAL SECOND and so could be discarded.
To fix, get rid of the use of fls(), and make a function based on
intervaltypmodout to produce a field ID code adapted to the need here.
Per bug #14479 from Piotr Stefaniak. Back-patch to 9.2 where transform
functions were introduced, because this code was born broken.
Discussion: https://postgr.es/m/20161227172307.10135.7747@wrigleys.postgresql.org
In 56c7d8d the behavior to keep .partial segments around
(considered corrupt) in case an connection failure occurs was
accidentally removed. This would lead to an incomplete segment
being considered complete.
Author: Michael Paquier
hashname() asserted that the key string it is given is shorter than
NAMEDATALEN. That should surely always be true if the input is in fact a
regular value of type "name". However, for reasons of coding convenience,
we allow plain old C strings to be treated as "name" values in many places.
Some SQL functions accept arbitrary "text" inputs, convert them to C
strings, and pass them otherwise-untransformed to syscache lookups for name
columns, allowing an overlength input value to trigger hashname's Assert.
This would be a DOS problem, except that it only happens in assert-enabled
builds which aren't recommended for production. In a production build,
you'll just get a name lookup error, since regardless of the hash value
computed by hashname, the later equality comparison checks can't match.
Likewise, if the catalog lookup is done by seqscan or indexscan searches,
there will just be a lookup error, since the name comparison functions
don't contain any similar length checks, and will see an overlength input
as unequal to any stored entry.
After discussion we concluded that we should simply remove this Assert.
It's inessential to hashname's own functionality, and having such an
assertion in only some paths for name lookup is more of a foot-gun than
a useful check. There may or may not be a case for the affected callers
to do something other than let the name lookup fail, but we'll consider
that separately; in any case we probably don't want to change such
behavior in the back branches.
Per report from Tushar Ahuja. Back-patch to all supported branches.
Report: https://postgr.es/m/7d0809ee-6f25-c9d6-8e74-5b2967830d49@enterprisedb.com
Discussion: https://postgr.es/m/17691.1482523168@sss.pgh.pa.us
\crosstabview's complaint about multiple entries for the same crosstab
cell quoted the wrong row and/or column values. It would accidentally
appear to work if the data had been in strcmp() order to start with,
which probably explains how we missed noticing this during development.
This could be fixed in more than one way, but the way I chose was to
hang onto both result pointers from bsearch() and use those to get at
the value names.
In passing, avoid casting away const in the bsearch comparison functions.
No bug there, just poor style.
Per bug #14476 from Tomonari Katsumata. Back-patch to 9.6 where
\crosstabview was introduced.
Report: https://postgr.es/m/20161225021519.10139.45460@wrigleys.postgresql.org
The -v/--verbose option was not included in the output from --help for
pg_dumpall even though it's in the pg_dumpall documentation and has
apparently been around since pg_dumpall was reimplemented in C in 2002.
Fix that by adding it.
Pointed out by Daniel Westermann.
Back-patch to all supported branches.
Discussion: https://www.postgresql.org/message-id/2020970042.4589542.1482482101585.JavaMail.zimbra%40dbi-services.com
When providing tab completion for ALTER DEFAULT PRIVILEGES, we are
including the list of roles as possible options for completion after the
GRANT or REVOKE. Further, we accept FOR ROLE/IN SCHEMA at the same time
and in either order, but the tab completion was only working for one or
the other. Lastly, we weren't using the actual list of allowed kinds of
objects for default privileges for completion after the 'GRANT X ON' but
instead were completeing to what 'GRANT X ON' supports, which isn't the
ssame at all.
Address these issues by improving the forward tab-completion for ALTER
DEFAULT PRIVILEGES and then constrain and correct how the tail
completion is done when it is for ALTER DEFAULT PRIVILEGES.
Back-patch the forward/tail tab-completion to 9.6, where we made it easy
to handle such cases.
For 9.5 and earlier, correct the initial tab-completion to at least be
correct as far as it goes and then add a check for GRANT/REVOKE to only
tab-complete when the GRANT/REVOKE is the start of the command, so we
don't try to do tab-completion after we get to the GRANT/REVOKE part of
the ALTER DEFAULT PRIVILEGES command, which is better than providing
incorrect completions.
Initial patch for master and 9.6 by Gilles Darold, though I cleaned it
up and added a few comments. All bugs in the 9.5 and earlier patch are
mine.
Discussion: https://www.postgresql.org/message-id/1614593c-e356-5b27-6dba-66320a9bc68b@dalibo.com
Now that it has only INH_NO and INH_YES values, it's just weird that
it's not a plain bool, so make it that way.
Also rename RangeVar.inhOpt to "inh", to be like RangeTblEntry.inh.
My recollection is that we gave it a different name specifically because
it had a different representation than the derived bool value, but it
no longer does. And this is a good forcing function to be sure we
catch any places that are affected by the change.
Bump catversion because of possible effect on stored RangeVar nodes.
I'm not exactly convinced that we ever store RangeVar on disk, but
we have a readfuncs function for it, so be cautious. (If we do do so,
then commit e13486eba was in error not to bump catversion.)
Follow-on to commit e13486eba.
Discussion: http://postgr.es/m/CA+TgmoYe+EG7LdYX6pkcNxr4ygkP4+A=jm9o-CPXyOvRiCNwaQ@mail.gmail.com
I got a little annoyed by reading documentation paragraphs containing
both spellings within a few lines of each other. My dictionary says
"descendant" is the preferred spelling, and it's certainly the majority
usage in our tree, so standardize on that.
For one usage in parallel.sgml, I thought it better to rewrite to avoid
the term altogether.
There was code that attempted to check whether the sequence name stored
inside the sequence was the same as the name in pg_class. But that code
was already ifdef'ed out, and now that the sequence no longer stores its
own name, it's altogether obsolete, so remove it.
This is basically for the same reasons I got rid of _hash_wrtbuf()
in commit 25216c98938495fd741bf585dcbef45b3a9ffd40: it's not
convenient to have a function which encapsulates MarkBufferDirty(),
especially as we move towards having hash indexes be WAL-logged.
Patch by me, reviewed (but not entirely endorsed) by Amit Kapila.
The previous coding failed to work correctly when we have a
multi-level partitioned hierarchy where tables at successive levels
have different attribute numbers for the partition key attributes. To
fix, have each PartitionDispatch object store a standalone
TupleTableSlot initialized with the TupleDesc of the corresponding
partitioned table, along with a TupleConversionMap to map tuples from
the its parent's rowtype to own rowtype. After tuple routing chooses
a leaf partition, we must use the leaf partition's tuple descriptor,
not the root table's. To that end, a dedicated TupleTableSlot for
tuple routing is now allocated in EState.
Amit Langote
When we are altering a text search configuration, we are getting the
tuple from pg_ts_config and using its OID, so use TSConfigRelationId
when invoking any post-alter hooks and setting the object address.
Further, in the functions called from AlterTSConfiguration(), we're
saving information about the command via
EventTriggerCollectAlterTSConfig(), so we should be setting
commandCollected to true. Also add a regression test to
test_ddl_deparse for ALTER TEXT SEARCH CONFIGURATION.
Author: Artur Zakirov, a few additional comments by me
Discussion: https://www.postgresql.org/message-id/57a71eba-f2c7-e7fd-6fc0-2126ec0b39bd%40postgrespro.ru
Back-patch the fix for the InvokeObjectPostAlterHook() call to 9.3 where
it was introduced, and the fix for the ObjectAddressSet() call and
setting commandCollected to true to 9.5 where those changes to
ProcessUtilitySlow() were introduced.
Having a WITH OIDS specification should result in the creation of an OID
column, but commit b943f502b broke that in the case that there were LIKE
tables without OIDS. Commentary in that patch makes it look like this was
intentional, but if so it was based on a faulty reading of what inheritance
does: the parent tables can add an OID column, but they can't subtract one.
AFAICS, the behavior ought to be that you get an OID column if any of the
inherited tables, LIKE tables, or WITH clause ask for one.
Also, revert that patch's unnecessary split of transformCreateStmt's loop
over the tableElts list into two passes. That seems to have been based on
a misunderstanding as well: we already have two-pass processing here,
we don't need three passes.
Per bug #14474 from Jeff Dafoe. Back-patch to 9.6 where the misbehavior
was introduced.
Report: https://postgr.es/m/20161222145304.25620.47445@wrigleys.postgresql.org
When the input value to a CoerceToDomain expression node is a read-write
expanded datum, we should pass a read-only pointer to any domain CHECK
expressions and then return the original read-write pointer as the
expression result. Previously we were blindly passing the same pointer to
all the consumers of the value, making it possible for a function in CHECK
to modify or even delete the expanded value. (Since a plpgsql function
will absorb a passed-in read-write expanded array as a local variable
value, it will in fact delete the value on exit.)
A similar hazard of passing the same read-write pointer to multiple
consumers exists in domain_check() and in ExecEvalCase, so fix those too.
The fix requires adding MakeExpandedObjectReadOnly calls at the appropriate
places, which is simple enough except that we need to get the data type's
typlen from somewhere. For the domain cases, solve this by redefining
DomainConstraintRef.tcache as okay for callers to access; there wasn't any
reason for the original convention against that, other than not wanting the
API of typcache.c to be any wider than it had to be. For CASE, there's
no good solution except to add a syscache lookup during executor start.
Per bug #14472 from Marcos Castedo. Back-patch to 9.5 where expanded
values were introduced.
Discussion: https://postgr.es/m/15225.1482431619@sss.pgh.pa.us
Some background activity (like checkpoints, archive timeout, standby
snapshots) is not supposed to happen on an idle system. Unfortunately
so far it was not easy to determine when a system is idle, which
defeated some of the attempts to avoid redundant activity on an idle
system.
To make that easier, allow to make individual WAL insertions as not
being "important". By checking whether any important activity happened
since the last time an activity was performed, it now is easy to check
whether some action needs to be repeated.
Use the new facility for checkpoints, archive timeout and standby
snapshots.
The lack of a facility causes some issues in older releases, but in my
opinion the consequences (superflous checkpoints / archived segments)
aren't grave enough to warrant backpatching.
Author: Michael Paquier, editorialized by Andres Freund
Reviewed-By: Andres Freund, David Steele, Amit Kapila, Kyotaro HORIGUCHI
Bug: #13685
Discussion:
https://www.postgresql.org/message-id/20151016203031.3019.72930@wrigleys.postgresql.orghttps://www.postgresql.org/message-id/CAB7nPqQcPqxEM3S735Bd2RzApNqSNJVietAC=6kfkYv_45dKwA@mail.gmail.com
Backpatch: -
You can't just cast a HashMetaPage to a Page, because the meta page
data is stored after the page header, not at offset 0. Fortunately,
this didn't break anything because it happens to find hashm_bsize
at the offset at which it expects to find pd_pagesize_version, and
the values are close enough to the same that this works out.
Still, it's a bug, so back-patch to all supported versions.
Mithun Cy, revised a bit by me.
No more indirect blocks. The blocks form a linked list instead.
This saves some memory, because we don't need to have a buffer in memory to
hold the indirect block (or blocks). To reflect that, TAPE_BUFFER_OVERHEAD
is reduced from 3 to 1 buffer, which allows using more memory for building
the initial runs.
Reviewed by Peter Geoghegan and Robert Haas.
Discussion: https://www.postgresql.org/message-id/34678beb-938e-646e-db9f-a7def5c44ada%40iki.fi
The U&'...' and U&"..." syntaxes silently discarded a surrogate pair
start (that is, a code between U+D800 and U+DBFF) if it occurred at
the very end of the string. This seems like an obvious oversight,
since we throw an error for every other invalid combination of surrogate
characters, including the very same situation in E'...' syntax.
This has been wrong since the pair processing was added (in 9.0),
so back-patch to all supported branches.
Discussion: https://postgr.es/m/19113.1482337898@sss.pgh.pa.us
In an attempt to simplify the tsquery matching engine, the original
phrase search patch invented rewrite rules that would rearrange a
tsquery so that no AND/OR/NOT operator appeared below a PHRASE operator.
But this approach had numerous problems. The rearrangement step was
missed by ts_rewrite (and perhaps other places), allowing tsqueries
to be created that would cause Assert failures or perhaps crashes at
execution, as reported by Andreas Seltenreich. The rewrite rules
effectively defined semantics for operators underneath PHRASE that were
buggy, or at least unintuitive. And because rewriting was done in
tsqueryin() rather than at execution, the rearrangement was user-visible,
which is not very desirable --- for example, it might cause unexpected
matches or failures to match in ts_rewrite.
As a somewhat independent problem, the behavior of nested PHRASE operators
was only sane for left-deep trees; queries like "x <-> (y <-> z)" did not
behave intuitively at all.
To fix, get rid of the rewrite logic altogether, and instead teach the
tsquery execution engine to manage AND/OR/NOT below a PHRASE operator
by explicitly computing the match location(s) and match widths for these
operators.
This requires introducing some additional fields into the publicly visible
ExecPhraseData struct; but since there's no way for third-party code to
pass such a struct to TS_phrase_execute, it shouldn't create an ABI problem
as long as we don't move the offsets of the existing fields.
Another related problem was that index searches supposed that "!x <-> y"
could be lossily approximated as "!x & y", which isn't correct because
the latter will reject, say, "x q y" which the query itself accepts.
This required some tweaking in TS_execute_ternary along with the main
tsquery engine.
Back-patch to 9.6 where phrase operators were introduced. While this
could be argued to change behavior more than we'd like in a stable branch,
we have to do something about the crash hazards and index-vs-seqscan
inconsistency, and it doesn't seem desirable to let the unintuitive
behaviors induced by the rewriting implementation stand as precedent.
Discussion: https://postgr.es/m/28215.1481999808@sss.pgh.pa.us
Discussion: https://postgr.es/m/26706.1482087250@sss.pgh.pa.us
In pg_dump.c dumpCast() and dumpTransform(), we would happily ignore the
cast or transform if it happened to use a built-in function because we
weren't including the information about built-in functions when querying
pg_proc from getFuncs().
Modify the query in getFuncs() to also gather information about
functions which are used by user-defined casts and transforms (where
"user-defined" means "has an OID >= FirstNormalObjectId"). This also
adds to the TAP regression tests for 9.6 and master to cover these
types of objects.
Back-patch all the way for casts, back to 9.5 for transforms.
Discussion: https://www.postgresql.org/message-id/flat/20160504183952.GE10850%40tamriel.snowman.net
We didn't start ensuring that all built-in objects had OIDs less than
16384 until 8.1, so for 8.0 servers we still need to query the value out
of pg_database. We need this, in particular, to distinguish which casts
were built-in and which were user-defined.
For HEAD, we only worry about going back to 8.0, for the back-branches,
we also ensure that 7.0-7.4 work.
Discussion: https://www.postgresql.org/message-id/flat/20160504183952.GE10850%40tamriel.snowman.net
When CREATE OR REPLACE VIEW acts on an existing view, don't update the
view options until after the view query has been updated.
This is necessary in the case where CREATE OR REPLACE VIEW is used on
an existing view that is not updatable, and the new view is updatable
and specifies the WITH CHECK OPTION. In this case, attempting to apply
the new options to the view before updating its query fails, because
the options are applied using the ALTER TABLE infrastructure which
checks that WITH CHECK OPTION is only applied to an updatable view.
If new columns are being added to the view, that is also done using
the ALTER TABLE infrastructure, but it is important that that still be
done before updating the view query, because the rules system checks
that the query columns match those on the view relation. Added a
comment to explain that, in case someone is tempted to move that to
where the view options are now being set.
Back-patch to 9.4 where WITH CHECK OPTION was added.
Report: https://postgr.es/m/CAEZATCUp%3Dz%3Ds4SzZjr14bfct_bdJNwMPi-gFi3Xc5k1ntbsAgQ%40mail.gmail.com
It's not entirely clear that we should log a message here at all, but
it's certainly wrong to use elog() for a message that should clearly
be translatable.
Amit Langote
If we do not reset the FD_READ event, WaitForMultipleObjects won't
return it again again unless we've meanwhile read from the socket,
which is generally true but not guaranteed. WaitEventSetWaitBlock
itself may fail to return the event to the caller if the latch is
also set, and even if we changed that, the caller isn't obliged to
handle all returned events at once. On non-Windows systems, the
socket-read event is purely level-triggered, so this issue does
not exist. To fix, make Windows reset the event when needed.
This bug was introduced by 98a64d0bd7,
and causes hangs when trying to use the pldebugger extension.
Patch by Amit Kapial. Reported and tested by Ashutosh Sharma, who
also provided some analysis. Further analysis by Michael Paquier.
This shouldn't change the set of paths that get generated in any
way, but it is preparatory work for further changes to allow a
partial path to be merge-joined witih a non-partial path to produce
a partial join path.
Dilip Kumar, with cosmetic adjustments by me.
On AIX, doubles are aligned at 4 bytes, but int64 is aligned at 8 bytes.
Our code assumes that doubles have alignment that can also be applied to
int64, but that fails in this case. One effect is that
heap_form_tuple() writes tuples in a different layout than
Form_pg_sequence expects.
Rather than rewrite the whole alignment code, work around the issue by
reordering the columns in pg_sequence so that the first int64 column
naturally comes out at an 8-byte boundary.
Commit 56c7d8d455 allowed pg_basebackup
to stream WAL in tar mode. But there is the restriction that WAL
streaming in tar mode works only when the value - (dash) is not
specified as output directory. This means that the combination of
three options "-D -", "-F t" and "-X stream" is invalid. However,
previously, even when those options were specified at the same time,
pg_basebackup background process unexpectedly started streaming WAL.
And then it exited with an error.
This commit changes pg_basebackup so that it errors out on such
invalid combination of options at the beginning.
Reviewed by Magnus Hagander, and patch by me.
aggstate->evalproj is always set up by ExecInitAgg, so there's no
need to test. Doing so led Coverity to think that we might be
intending "slot" to be possibly NULL here, and it quite properly
complained that the rest of combine_aggregates() wasn't prepared
for that.
Also fix a couple of obvious thinkos in Asserts checking that
"inputoff" isn't past the end of the slot.
Errors introduced in commit 8ed3f11bb, so no need for back-patch.
Move sequence metadata (start, increment, etc.) into a proper system
catalog instead of storing it in the sequence heap object. This
separates the metadata from the sequence data. Sequence metadata is now
operated on transactionally by DDL commands, whereas previously
rollbacks of sequence-related DDL commands would be ignored.
Reviewed-by: Andreas Karlsson <andreas@proxel.se>
If a query contained two aggregates that could share the transition value,
we would correctly collect the input into a tuplesort only once, but
incorrectly run the transition function over the accumulated input twice,
in finalize_aggregates(). That caused a crash, when we tried to call
tuplesort_performsort() on an already-freed NULL tuplestore.
Backport to 9.6, where sharing of transition state and this bug were
introduced.
Analysis by Tom Lane.
Discussion: https://www.postgresql.org/message-id/ac5b0b69-744c-9114-6218-8300ac920e61@iki.fi
The distance of a removed phrase operator should propagate up to a
parent phrase operator if there is one, but this only worked correctly
in left-deep trees. Throwing in a few parentheses confused it completely,
as indeed was illustrated by bizarre results in existing regression test
cases.
To fix, track unaccounted-for distances that should propagate to the left
and to the right of the current node, rather than trying to make it work
with only one returned distance.
Also make some adjustments to behave as well as we can for cases of
intermixed phrase and regular (AND/OR) operators. I don't think it's
possible to be 100% correct for that without a rethinking of the tsquery
representation; for example, maybe we should just not drop stopword nodes
at all underneath phrase operators. But this is better than it was,
and changing tsquery representation wouldn't be safely back-patchable.
While at it, I simplified the API of the clean_fakeval_intree function
a bit by getting rid of the "char *result" output parameter; that wasn't
doing anything that wasn't redundant with whether the result node is
NULL or not, and testing for NULL seems a lot clearer/safer.
This is part of a larger project to fix various infelicities in the
phrase-search implementation, but this part seems comittable on its own.
Back-patch to 9.6 where phrase operators were introduced.
Discussion: https://postgr.es/m/28215.1481999808@sss.pgh.pa.us
Discussion: https://postgr.es/m/26706.1482087250@sss.pgh.pa.us
A bucket squeeze operation needs to lock each page of the bucket
before releasing the prior page, but the previous coding fumbled the
locking when freeing an overflow page during a bucket squeeze
operation. Commit 6d46f4783e
introduced this bug.
Amit Kapila, with help from Kuntal Ghosh and Dilip Kumar, after
an initial trouble report by Jeff Janes. Reviewed by me. I also
fixed a problem with a comment.
This feature is also known as "quorum commit" especially in discussion
on pgsql-hackers.
This commit adds the following new syntaxes into synchronous_standby_names
GUC. By using FIRST and ANY keywords, users can specify the method to
choose synchronous standbys from the listed servers.
FIRST num_sync (standby_name [, ...])
ANY num_sync (standby_name [, ...])
The keyword FIRST specifies a priority-based synchronous replication
which was available also in 9.6 or before. This method makes transaction
commits wait until their WAL records are replicated to num_sync
synchronous standbys chosen based on their priorities.
The keyword ANY specifies a quorum-based synchronous replication
and makes transaction commits wait until their WAL records are
replicated to *at least* num_sync listed standbys. In this method,
the values of sync_state.pg_stat_replication for the listed standbys
are reported as "quorum". The priority is still assigned to each standby,
but not used in this method.
The existing syntaxes having neither FIRST nor ANY keyword are still
supported. They are the same as new syntax with FIRST keyword, i.e.,
a priorirty-based synchronous replication.
Author: Masahiko Sawada
Reviewed-By: Michael Paquier, Amit Kapila and me
Discussion: <CAD21AoAACi9NeC_ecm+Vahm+MMA6nYh=Kqs3KB3np+MBOS_gZg@mail.gmail.com>
Many thanks to the various individuals who were involved in
discussing and developing this feature.
This case wasn't thought through sufficiently in commit 100340e2d.
It's true that the FK proves that every outer row has a match in the
inner table, but we forgot that some of the inner rows might be filtered
away by WHERE conditions located within the semijoin's RHS.
If the RHS is just one table, we can reasonably take the semijoin
selectivity as equal to the fraction of the referenced table's rows
that are expected to survive its restriction clauses.
If the RHS is a join, it's not clear how much of the referenced table
might get through the join, so fall back to the same rule we were
already using for other outer-join cases: use the minimum of the
regular per-clause selectivity estimates. This gives the same result
as if we hadn't considered the FK at all when there's a single FK
column, but it should still help for multi-column FKs, which is the
case that 100340e2d is really meant to help with.
Back-patch to 9.6 where the previous commit came in.
Discussion: https://postgr.es/m/16149.1481835103@sss.pgh.pa.us
Previously num_sync could be set to zero and this setting caused
an assertion failure. This means that multiple synchronous standbys
code should assume that num_sync is greater than zero.
Also setting num_sync to zero is nonsense because it's basically
the configuration for synchronous replication. If users want not to
make transaction commits wait for any standbys,
synchronous_standby_names should be emptied to disable synchronous
replication instead of setting num_sync to zero.
This patch forbids users from setting num_sync to zero in
synchronous_standby_names. If zero is specified, an error will
happen during processing the parameter settings.
Back-patch to 9.6 where multiple synchronous standbys feature was added.
Patch by me. Reviewed by Tom Lane.
Discussion: <CAHGQGwHWB3izc6cXuFLh5kOcAbFXaRhhgwd-X5PeN9TEjxqXwg@mail.gmail.com>
I got frustrated by the lack of commentary in this area, so here is some
reverse-engineered documentation, along with minor stylistic cleanup.
No code changes more significant than removal of unused variables.
Back-patch to 9.6, not because that's useful in itself, but because
we have some bugs to fix in phrase search and this would cause merge
failures if it's only in HEAD.
array_base and array_stride were added so that we could identify the
offset of an LWLock within a tranche, but this facility is only very
marginally used apart from the main tranche. So, give every lock in
the main tranche its own tranche ID and get rid of array_base,
array_stride, and all that's attached. For debugging facilities
(Trace_lwlocks and LWLOCK_STATS) print the pointer address of the
LWLock using %p instead of the offset. This is arguably more useful,
and certainly a lot cheaper. Drop the offset-within-tranche from
the information reported to dtrace and from one can't-happen message
inside lwlock.c.
The main user-visible impact of this change is that pg_stat_activity
will now report all waits for LWLocks as "LWLock" rather than
reporting some as "LWLockTranche" and others as "LWLockNamed".
The main motivation for this change is that the need to specify an
array_base and an array_stride is awkward for parallel query. There
is only a very limited supply of tranche IDs so we can't just keep
allocating new ones, and if we try to use the same tranche IDs every
time then we run into trouble when multiple parallel contexts are
use simultaneously. So if we didn't get rid of this mechanism we'd
have to make it even more complicated. By simplifying it in this
way, we instead reduce the size of the generated code for lwlock.c
by about 5%.
Discussion: http://postgr.es/m/CA+TgmoYsFn6NUW1x0AZtupJGUAs1UDY4dJtCN47_Q6D0sP80PA@mail.gmail.com
Commit 5dfc198146 introduced the use
of a new type of hash table with linear reprobing for hash aggregates.
Such a hash table behaves very poorly if keys are inserted in hash
order, which does in fact happen in the case where a query use a
Finalize HashAggregate node fed (via Gather) by a Partial
HashAggregate node. In fact, queries with this type of plan tend
to run effectively forever.
Fix that by seeding the hash value differently in each worker
(and in the leader, if it participates).
Andres Freund and Robert Haas
In _hash_freeovflpage(), if we're freeing the overflow page that
immediate follows the page to which tuples are being moved (the
confusingly-named "write buffer"), don't forget to mark that
page dirty after updating its hasho_nextblkno.
In _hash_squeezebucket(), it's not necessary to mark the primary
bucket page dirty if there are no overflow pages, because there's
nothing to squeeze in that case.
Amit Kapila, with help from Kuntal Ghosh and Dilip Kumar, after
an initial trouble report by Jeff Janes.
The whole concept of _hash_wrtbuf() is that we need to know at the
time we're releasing the buffer lock (and pin) whether we dirtied the
buffer, but this is easy to get wrong. This patch actually fixes one
non-obvious bug of that form: hashbucketcleanup forgot to signal
_hash_squeezebucket, which gets the primary bucket page already
locked, as to whether it had already dirtied the page. Calling
MarkBufferDirty() at the places where we dirty the buffer is more
intuitive and lets us simplify the code in various places as well.
On top of all that, the ultimate goal here is to make hash indexes
WAL-logged, and as the comments to _hash_wrtbuf() note, it should
go away when that happens. Making it go away a little earlier than
that seems like a good preparatory step.
Report by Jeff Janes. Diagnosis by Amit Kapila, Kuntal Ghosh,
and Dilip Kumar. Patch by me, after studying an alternative patch
submitted by Amit Kapila.
Discussion: http://postgr.es/m/CAA4eK1Kf6tOY0oVz_SEdngiNFkeXrA3xUSDPPORQvsWVPdKqnA@mail.gmail.com
This is a trivial update (consisting in fact only in the addition of
a comment). The point is just to get back to being synced with an
official release of tzcode, rather than some ad-hoc point in their
commit history, which is where commit 1f87181e1 left it.
There's no good reason why plpgsql's GET DIAGNOSTICS statement can't
support an array element as target variable, since the execution code
already uses the generic exec_assign_value() function to assign to it.
Hence, refactor the grammar to allow that, by making getdiag_target
depend on the assign_var production.
Ideally we'd also let a cursor_variable expand to an element of a
refcursor[] array, but that's substantially harder since those statements
also have to handle bound-cursor-variable cases. For now, just make sure
the reported error is sensible, ie "cursor variable must be a simple
variable" not "variable must be of type cursor or refcursor". The latter
was quite confusing from the user's viewpoint, since what he wrote
satisfies the claimed restriction.
Per bug #14463 from Zhou Digoal. Given the lack of previous complaints,
I see no need for a back-patch.
Discussion: https://postgr.es/m/20161213152548.14897.81245@wrigleys.postgresql.org
The existing tests in preprocess_minmax_aggregates() usually prevent it
from trying to do anything with queries containing CTEs, but there's an
exception: a CTE could be present as a member of an appendrel, if we
flattened a UNION ALL that contains CTE references. If it did try to
generate an optimized path for a query using a CTE, it failed with
"could not find plan for CTE", as reported by Torsten Förtsch.
The proximate cause is an unwise decision in commit 3fc6e2d7f to clear
subroot->cte_plan_ids in build_minmax_path(). That left the subroot's
cte_plan_ids list out of step with its parse->cteList.
Removing the "subroot->cte_plan_ids = NIL;" assignment is enough to let
the case work again, but really it's pretty silly to be expending any
cycles at all in this module when there are CTEs: we always treat their
outputs as unordered so there's no way for the optimization to win.
Hence, also add an early-exit test so we don't waste time like that.
Back-patch to 9.6 where the misbehavior was introduced.
Report: https://postgr.es/m/CAKkG4_=gjY5QiHtqSZyWMwDuTd_CftKoTaCqxjJ7uUz1-Gw=qw@mail.gmail.com
Commit 6d46f4783e failed to account for
the possibility that hashbulkdelete() might encounter a bucket that
has been split since it began scanning the bucket array. Repair.
Extracted from a larger pathc by Amit Kapila; I rewrote the comment.
Previously, the "sem" field of PGPROC varied in size depending on which
kernel semaphore API we were using. That was okay as long as there was
only one likely choice per platform, but in the wake of commit ecb0d20a9,
that assumption seems rather shaky. It doesn't seem out of the question
anymore that an extension compiled against one API choice might be loaded
into a postmaster built with another choice. Moreover, this prevents any
possibility of selecting the semaphore API at postmaster startup, which
might be something we want to do in future.
Hence, change PGPROC.sem to be PGSemaphore (i.e. a pointer) for all Unix
semaphore APIs, and turn the pointed-to data into an opaque struct whose
contents are only known within the responsible modules.
For the SysV and unnamed-POSIX APIs, the pointed-to data has to be
allocated elsewhere in shared memory, which takes a little bit of
rejiggering of the InitShmemAllocation code sequence. (I invented a
ShmemAllocUnlocked() function to make that a little cleaner than it used
to be. That function is not meant for any uses other than the ones it
has now, but it beats having InitShmemAllocation() know explicitly about
allocation of space for semaphores and spinlocks.) This change means an
extra indirection to access the semaphore data, but since we only touch
that when blocking or awakening a process, there shouldn't be any
meaningful performance penalty. Moreover, at least for the unnamed-POSIX
case on Linux, the sem_t type is quite a bit wider than a pointer, so this
reduces sizeof(PGPROC) which seems like a good thing.
For the named-POSIX API, there's effectively no change: the PGPROC.sem
field was and still is a pointer to something returned by sem_open() in
the postmaster's memory space. Document and check the pre-existing
limitation that this case can't work in EXEC_BACKEND mode.
It did not seem worth unifying the Windows semaphore ABI with the Unix
cases, since there's no likelihood of needing ABI compatibility much less
runtime switching across those cases. However, we can simplify the Windows
code a bit if we define PGSemaphore as being directly a HANDLE, rather than
pointer to HANDLE, so let's do that while we're here. (This also ends up
being no change in what's physically stored in PGPROC.sem. We're just
moving the HANDLE fetch from callees to callers.)
It would take a bunch of additional code shuffling to get to the point of
actually choosing a semaphore API at postmaster start, but the effects
of that would now be localized in the port/XXX_sema.c files, so it seems
like fit material for a separate patch. The need for it is unproven as
yet, anyhow, whereas the ABI risk to extensions seems real enough.
Discussion: https://postgr.es/m/4029.1481413370@sss.pgh.pa.us
Or at least I suppose that's what was really meant here. But even
aside from the not-per-project-style use of "0" to mean "NULL",
I doubt it's safe to assume that all valid pointers are > NULL.
Per buildfarm member pademelon.
This allows creating temporary replication slots that are removed
automatically at the end of the session or on error.
From: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Split md5_crypt_verify() into three functions:
* get_role_password() to fetch user's password from pg_authid, and check
its expiration.
* md5_crypt_verify() to check an MD5 authentication challenge
* plain_crypt_verify() to check a plaintext password.
get_role_password() will be needed as a separate function by the upcoming
SCRAM authentication patch set. Most of the remaining functionality in
md5_crypt_verify() was different for MD5 and plaintext authentication, so
split that for readability.
While we're at it, simplify the *_crypt_verify functions by using
stack-allocated buffers to hold the temporary MD5 hashes, instead of
pallocing.
Reviewed by Michael Paquier.
Discussion: https://www.postgresql.org/message-id/3029e460-d47c-710e-507e-d8ba759d7cbb@iki.fi
Also use the new facility for generating RADIUS authenticator requests,
and salt in chkpass extension.
Reword the error messages to be nicer. Fix bogus error code used in the
message in BackendStartup.
pg_backend_random() is used for MD5 salt generation, but it can fail, and
no checks were done on its status code.
Fix memory leak, if generating a random number for a cancel key failed.
Both issues were spotted by Coverity. Fix by Michael Paquier.
Clean up some technical debt left behind by commit 72b1e3a21: instead of
quickly hacking the name of base_yylex() with a #define, set it properly
with "%option prefix". This causes the names of pgc.l's other exported
symbols to change as well, so run around and modify the outside references
to them as needed. Similarly, make pgc.l's external references to
base_yylval use that variable's true name instead of a macro.
The reason for doing this now is that the quick-hack solution will fail
with future versions of flex, as reported by Дилян Палаузов.
Hence, back-patch into 9.6 where the previous commit appeared, since
it's likely people will build 9.6 with newer flex versions during
its lifetime.
Discussion: https://postgr.es/m/d845c1af-e18d-6651-178f-9f08cdf37e10@aegee.org
When ts_rewrite()'s replacement argument is an empty tsquery, it's supposed
to simplify any operator nodes whose operand(s) become NULL; but it failed
to do that reliably, because dropvoidsubtree() only examined the top level
of the result tree. Rather than make a second recursive pass, let's just
give the responsibility to dofindsubquery() to simplify while it's doing
the main replacement pass. Per report from Andreas Seltenreich.
Artur Zakirov, with some cosmetic changes by me. Back-patch to all
supported branches.
Discussion: https://postgr.es/m/8737i01dew.fsf@credativ.de
PLy_generate_spi_exceptions neglected to do Py_INCREF on the new exception
objects, evidently supposing that PyModule_AddObject would do that --- but
it doesn't. This left us in a situation where a Python garbage collection
cycle could result in deletion of exception object(s), causing server
crashes or wrong answers if the exception objects are used later in the
session.
In addition, PLy_generate_spi_exceptions didn't bother to test for
a null result from PyErr_NewException, which at best is inconsistent
with the code in PLy_add_exceptions. And PLy_add_exceptions, while it
did do Py_INCREF on the exceptions it makes, waited to do that till
after some PyModule_AddObject calls, creating a similar risk for
failure if garbage collection happened within those calls.
To fix, refactor to have just one piece of code that creates an
exception object and adds it to the spiexceptions module, bumping the
refcount first.
Also, let's add an additional refcount to represent the pointer we're
going to store in a C global variable or hash table. This should only
matter if the user does something weird like delete the spiexceptions
Python module, but lack of paranoia has caused us enough problems in
PL/Python already.
The fact that PyModule_AddObject doesn't do a Py_INCREF of its own
explains the need for the Py_INCREF added in commit 4c966d920, so we
can improve the comment about that; also, this means we really want
to do that before not after the PyModule_AddObject call.
The missing Py_INCREF in PLy_generate_spi_exceptions was reported and
diagnosed by Rafa de la Torre; the other fixes by me. Back-patch
to all supported branches.
Discussion: https://postgr.es/m/CA+Fz15kR1OXZv43mDrJb3XY+1MuQYWhx5kx3ea6BRKQp6ezGkg@mail.gmail.com
array_position and its cousin array_positions were caching the element
type equality function's FmgrInfo without being careful enough to put it
in a long-lived context. This is obviously broken but it didn't matter
in most cases; only when using arrays of records (involving record_eq)
it becomes a problem. The fix is to ensure that the type's equality
function's FmgrInfo is cached in the array_position's flinfo->fn_mcxt
rather than the current memory context.
Apart from record types, the only other case that seems complex enough
to possibly cause the same problem are range types. I didn't find a way
to reproduce the problem with those, so I only include the test case
submitted with the bug report as regression test.
Bug report and patch: Junseok Yang
Discussion: https://postgr.es/m/CAE+byMupUURYiZ6bKYgMZb9pgV1CYAijJGqWj-90W=nS7uEOeA@mail.gmail.com
Backpatch to 9.5, where array_position appeared.
Commit 4212cb7326 rendered a comment
in execMain.c incorrect. Per complaint from Tom Lane, repair.
Patch from Amit Kapila, per wording suggested by Tom Lane and me.
Previously, it was thought that this only needed to be done for the
benefit of possible standbys, so wal_level = minimal skipped it.
But that's not safe, because during crash recovery we might replay
XLOG_DBASE_CREATE or XLOG_TBLSPC_CREATE record which recursively
removes the directory that contains the new init fork. So log it
always.
The user-visible effect of this bug is that if you create a database
or tablespace, then create an unlogged table, then crash without
checkpointing, then restart, accessing the table will fail, because
the it won't have been properly reset. This commit fixes that.
Michael Paquier, per a report from Konstantin Knizhnik. Wording of
the comments per a suggestion from me.
expandRTE() and get_rte_attribute_type() reported the exprType() and
exprTypmod() values of the expressions in the first row of the VALUES as
being the column type/typmod returned by the VALUES RTE. That's fine for
the data type, since we coerce all expressions in a column to have the same
common type. But we don't coerce them to have a common typmod, so it was
possible for rows after the first one to return values that violate the
claimed column typmod. This leads to the incorrect result seen in bug
#14448 from Hassan Mahmood, as well as some other corner-case misbehaviors.
The desired behavior is the same as we use in other type-unification
cases: report the common typmod if there is one, but otherwise return -1
indicating no particular constraint. It's cheap for transformValuesClause
to determine the common typmod while transforming a multi-row VALUES, but
it'd be less cheap for expandRTE() and get_rte_attribute_type() to
re-determine that info every time they're asked --- possibly a lot less
cheap, if the VALUES has many rows. Therefore, the best fix is to record
the common typmods explicitly in a list in the VALUES RTE, as we were
already doing for column collations. This looks quite a bit like what
we're doing for CTE RTEs, so we can save a little bit of space and code by
unifying the representation for those two RTE types. They both now share
coltypes/coltypmods/colcollations fields. (At some point it might seem
desirable to populate those fields for all RTE types; but right now it
looks like constructing them for other RTE types would add more code and
cycles than it would save.)
The RTE change requires a catversion bump, so this fix is only usable
in HEAD. If we fix this at all in the back branches, the patch will
need to look quite different.
Report: https://postgr.es/m/20161205143037.4377.60754@wrigleys.postgresql.org
Discussion: https://postgr.es/m/27429.1480968538@sss.pgh.pa.us
Partition name needs to be quoted in the ATTACH PARTITION command
constructed in binary-upgrade mode.
Silence compiler warning about set but unused variable, without
--enable-cassert.
Commit fe0a0b59, which moved code to do MD5 authentication to a separate
CheckMD5Auth() function, left behind a comment that really belongs inside
the function, too. Also move the check for db_user_namespace inside the
function, seems clearer that way.
Now that the md5 salt is passed as argument to md5_crypt_verify, it's a bit
silly that it peeks into the Port struct to see if MD5 authentication was
used. Seems more straightforward to treat it as an MD5 authentication, if
the md5 salt argument is given. And after that, md5_crypt_verify only used
the Port argument to look at port->user_name, but that is redundant,
because it is also passed as a separate 'role' argument. So remove the Port
argument altogether.
We allegedly allocated all remaining memory for the read buffers of the
sort tapes, but we allocated the merge heap only after that. That means
that the allocation of the merge heap was guaranteed to go over the memory
limit. Fix by allocating the merge heap first. This makes little difference
in practice, because the merge heap is tiny, but let's tidy.
While we're at it, add a safeguard for the case that we are already over
the limit when allocating the read buffers. That shouldn't happen, but
better safe than sorry.
The memory accounting error was reported off-list by Peter Geoghegan.
Table partitioning is like table inheritance and reuses much of the
existing infrastructure, but there are some important differences.
The parent is called a partitioned table and is always empty; it may
not have indexes or non-inherited constraints, since those make no
sense for a relation with no data of its own. The children are called
partitions and contain all of the actual data. Each partition has an
implicit partitioning constraint. Multiple inheritance is not
allowed, and partitioning and inheritance can't be mixed. Partitions
can't have extra columns and may not allow nulls unless the parent
does. Tuples inserted into the parent are automatically routed to the
correct partition, so tuple-routing ON INSERT triggers are not needed.
Tuple routing isn't yet supported for partitions which are foreign
tables, and it doesn't handle updates that cross partition boundaries.
Currently, tables can be range-partitioned or list-partitioned. List
partitioning is limited to a single column, but range partitioning can
involve multiple columns. A partitioning "column" can be an
expression.
Because table partitioning is less general than table inheritance, it
is hoped that it will be easier to reason about properties of
partitions, and therefore that this will serve as a better foundation
for a variety of possible optimizations, including query planner
optimizations. The tuple routing based which this patch does based on
the implicit partitioning constraints is an example of this, but it
seems likely that many other useful optimizations are also possible.
Amit Langote, reviewed and tested by Robert Haas, Ashutosh Bapat,
Amit Kapila, Rajkumar Raghuwanshi, Corey Huinker, Jaime Casanova,
Rushabh Lathia, Erik Rijkers, among others. Minor revisions by me.
Ancient oversight in PageOutput(): if popen() fails, we'd better reset
the SIGPIPE handler before returning stdout, because ClosePager() won't.
Noticed while fixing the empty-PAGER issue.
If the PAGER environment variable is set but contains an empty string,
psql would pass it to "sh" which would silently exit, causing whatever
query output we were printing to vanish entirely. This is quite
mystifying; it took a long time for us to figure out that this was the
cause of Joseph Brenner's trouble report. Rather than allowing that
to happen, we should treat this as another way to specify "no pager".
(We could alternatively treat it as selecting the default pager, but
it seems more likely that the former is what the user meant to achieve
by setting PAGER this way.)
Nonempty, but all-white-space, PAGER values have the same behavior, and
it's pretty easy to test for that, so let's handle that case the same way.
Most other cases of faulty PAGER values will result in the shell printing
some kind of complaint to stderr, which should be enough to diagnose the
problem, so we don't need to work harder than this. (Note that there's
been an intentional decision not to be very chatty about apparent failure
returns from the pager process, since that may happen if, eg, the user
quits the pager with control-C or some such. I'd just as soon not start
splitting hairs about which exit codes might merit making our own report.)
libpq's old PQprint() function was already on board with ignoring empty
PAGER values, but for consistency, make it ignore all-white-space values
as well.
It's been like this a long time, so back-patch to all supported branches.
Discussion: https://postgr.es/m/CAFfgvXWLOE2novHzYjmQK8-J6TmHz42G8f3X0SORM44+stUGmw@mail.gmail.com
In commit fe0a0b59, the datatype used for MyCancelKey and other variables
that store cancel keys were changed from long to uint32, but I missed this
one. That broke query cancellation on platforms where long is wider than 32
bits.
Report by Andres Freund, fix by Michael Paquier.
Rearrange a bit of code to ensure that 'mode' in LWLockRelease is
obviously always set, which seems a bit cleaner and avoids a compiler
warning (thanks to Robert for the suggestion!).
In GetCachedPlan(), initialize 'plan' to silence a compiler warning, but
also add an Assert() to make sure we don't ever actually fall through
with 'plan' still being set to NULL, since we are about to dereference
it.
Neither of these appear to be live bugs but at least gcc
5.4.0-6ubuntu1~16.04.4 doesn't quite have the smarts to realize that.
Discussion: https://www.postgresql.org/message-id/20161129152102.GR13284%40tamriel.snowman.net
It typically is a "long", but it seems possible that on some platforms
it wouldn't be. In any case, this silences a compiler warning on
OpenBSD (cf buildfarm member curculio).
While at it, use snprintf not sprintf. This format string couldn't
possibly overrun the supplied buffer, but that doesn't seem like
a good reason not to use the safer style.
Oversight in commit f828654e1. Back-patch to 9.6 where that came in.
Previously, a prepared statement created via a Parse message could get
a parallel plan, but one created with a PREPARE statement could not.
This state of affairs was due to confusion on my (rhaas) part: I
erroneously believed that a CREATE TABLE .. AS EXECUTE statement could
only be performed with a prepared statement by PREPARE, but in fact
one created by a Prepare message works just as well. Therefore, it
makes no sense to allow parallel query in one case but not the other.
To fix, allow parallel query with all prepared statements, but run
the parallel plan serially (i.e. without workers) in the case of
CREATE TABLE .. AS EXECUTE. Also, document this.
Amit Kapila and Tobias Bussman, plus an extra sentence of
documentation by me.
If we're going to write a semicolon after calls of relptr_declare(),
then we don't need one inside the macro, and removing it suppresses
"empty declaration" warnings from pickier compilers (eg pademelon).
While at it, we might as well use relptr() inside relptr_declare(),
because otherwise that macro would likely go unused altogether.
Also improve the comment, which I for one found unclear,
and provide a specific example of intended usage.
The previously code worked OK as long as a Gather node was never
rescanned, or if it was rescanned, as long as it got at least as
many workers on rescan as it had originally. But if the number
of workers ever decreased on a rescan, then it could crash.
Andreas Seltenreich
We have had support for restrictive RLS policies since 9.5, but they
were only available through extensions which use the appropriate hooks.
This adds support into the grammer, catalog, psql and pg_dump for
restrictive RLS policies, thus reducing the cases where an extension is
necessary.
In passing, also move away from using "AND"d and "OR"d in comments.
As pointed out by Alvaro, it's not really appropriate to attempt
to make verbs out of "AND" and "OR", so reword those comments which
attempted to.
Reviewed By: Jeevan Chalke, Dean Rasheed
Discussion: https://postgr.es/m/20160901063404.GY4028@tamriel.snowman.net
If we failed to connect to one or more hosts, and then afterwards we
find one that fails to be read-write, the latter error message was
clobbering any earlier ones. Repair.
Mithun Cy, slightly revised by me.
It's possible for the metapage contents to change after we release
the lock, so we must read them before releasing the lock.
Amit Kapila. Submitted in response to a trouble report from
Andreas Seltenreich, though it is not certain this fixes the
problem.
Commit b460f5d669 -- at my suggestion --
increased the default value of max_worker_processes from 8 to 16, on
the theory that this would be harmless and convenient for users.
Unfortunately, this caused some buildfarm machines with low connection
limits to start failing, so apparently it's not harmless after all.
On 32-bit systems, don't try to use 64-bit DSA pointers, because the
computation of DSA_MAX_SEGMENT_SIZE overflows Size.
Cast 1 to Size before shifting it, so that the compiler doesn't
produce a result of the wrong width.
In passing, change one use of size_t to Size.
Commit 13df76a537 was overconfident
about how portable %016lx is. Some compilers complain because they
need %016llx, while platforms where DSA pointers are only 32 bits
get unhappy about using a 64-bit format for a 32-bit quantity.
Thomas Munro, per an off-list suggestion from me.
This adds a new routine, pg_strong_random() for generating random bytes,
for use in both frontend and backend. At the moment, it's only used in
the backend, but the upcoming SCRAM authentication patches need strong
random numbers in libpq as well.
pg_strong_random() is based on, and replaces, the existing implementation
in pgcrypto. It can acquire strong random numbers from a number of sources,
depending on what's available:
- OpenSSL RAND_bytes(), if built with OpenSSL
- On Windows, the native cryptographic functions are used
- /dev/urandom
Unlike the current pgcrypto function, the source is chosen by configure.
That makes it easier to test different implementations, and ensures that
we don't accidentally fall back to a less secure implementation, if the
primary source fails. All of those methods are quite reliable, it would be
pretty surprising for them to fail, so we'd rather find out by failing
hard.
If no strong random source is available, we fall back to using erand48(),
seeded from current timestamp, like PostmasterRandom() was. That isn't
cryptographically secure, but allows us to still work on platforms that
don't have any of the above stronger sources. Because it's not very secure,
the built-in implementation is only used if explicitly requested with
--disable-strong-random.
This replaces the more complicated Fortuna algorithm we used to have in
pgcrypto, which is unfortunate, but all modern platforms have /dev/urandom,
so it doesn't seem worth the maintenance effort to keep that. pgcrypto
functions that require strong random numbers will be disabled with
--disable-strong-random.
Original patch by Magnus Hagander, tons of further work by Michael Paquier
and me.
Discussion: https://www.postgresql.org/message-id/CAB7nPqRy3krN8quR9XujMVVHYtXJ0_60nqgVc6oUk8ygyVkZsA@mail.gmail.com
Discussion: https://www.postgresql.org/message-id/CAB7nPqRWkNYRRPJA7-cF+LfroYV10pvjdz6GNvxk-Eee9FypKA@mail.gmail.com
Previously gin_desc() displayed incorrect output "unknown action 0"
for XLOG_GIN_INSERT and XLOG_GIN_VACUUM_DATA_LEAF_PAGE records with
valid actions. The cause of this problem was that gin_desc() wrongly
used XLogRecGetData() to extract data from those records.
Since they were registered by XLogRegisterBufData(), gin_desc() should
have used XLogRecGetBlockData(), instead, like gin_redo().
Also there were other differences about how to treat XLOG_GIN_INSERT
record between gin_desc() and gin_redo().
This commit fixes gin_desc() routine so that it treats those records
in the same way as gin_redo().
Batch-patch to 9.5 where WAL record format was revamped and
XLogRegisterBufData() was added.
Reported-By: Andres Freund
Reviewed-By: Tom Lane
Discussion: <20160509194645.7lewnpw647zegx2m@alap3.anarazel.de>
transformOnConflictClause incremented p_next_resno while generating the
phony targetlist for the EXCLUDED pseudo-rel. Then that field got
incremented some more during transformTargetList, possibly leading to
free_parsestate concluding that we'd overrun the allowed length of a tlist,
as reported by Justin Pryzby.
We could fix this by resetting p_next_resno to 1 after using it for the
EXCLUDED pseudo-rel tlist, but it seems easier and less coupled to other
places if we just don't use that field at all in this loop. (Note that
this doesn't change anything about the resnos that end up appearing in
the main target list, because those are all replaced with target-column
numbers by updateTargetListEntry.)
In passing, fix incorrect type OID assigned to the whole-row Var for
"EXCLUDED.*" (somehow this escaped having any bad consequences so far,
but it's certainly wrong); remove useless assignment to var->location;
pstrdup the column names in case of a relcache flush; and improve
nearby comments.
Back-patch to 9.5 where ON CONFLICT was introduced.
Report: https://postgr.es/m/20161204163237.GA8030@telsasoft.com
This extends to MinGW builds the provision for MSVC-built libraries to
see putenv() effects. Doing so repairs, for example, the handling of
the krb_server_keyfile parameter when linked with MSVC-built MIT
Kerberos. Like the previous commit, no back-patch.
Until now, the first putenv() call of a given postgres.exe process would
cache the set of loaded CRTs. If a CRT unloaded after that call, the
next putenv() would crash. That risk was largely theoretical, because
the first putenv() precedes all PostgreSQL-initiated module loading.
However, this might explain bad interactions with antivirus and other
software that injects threads asynchronously. If an additional CRT
loaded after the first putenv(), pgwin32_putenv() would not discover it.
That CRT would have all environment changes predating its load, but it
would not receive later PostgreSQL-initiated changes. An additional CRT
loading concurrently with the first putenv() might miss that change in
addition to missing later changes. Fix all those problems. This
removes the cache mechanism from pgwin32_putenv(); the cost, less than
100 μs per backend startup, is negligible.
No resulting misbehavior was known to be user-visible given the core
distribution alone, but one can readily construct an affected extension
module. No back-patch given the lack of complaints and the potential
for behavior changes in non-PostgreSQL code running in the backend.
Christian Ullrich, reviewed by Michael Paquier.
This has no effect in the most conventional case, where no relevant DLL
uses a debug build. For an example where it does matter, given a debug
build of MIT Kerberos, the krb_server_keyfile parameter usually had no
effect. Since nobody wants a Heisenbug, back-patch to 9.2 (all
supported versions).
Christian Ullrich, reviewed by Michael Paquier.
In accordance with its own documentation, invoke CloseHandle() only when
directed in the documentation for the function that furnished the
handle. GetModuleHandle() does not so direct. We have been issuing
this call only in the rare event that a CRT DLL contains no "_putenv"
symbol, so lack of bug reports is uninformative. Back-patch to 9.2 (all
supported versions).
Christian Ullrich, reviewed by Michael Paquier.
Replace use of plain 0 as a null pointer constant. In comments, update
terminology and lessen redundancy. Back-patch to 9.2 (all supported
versions) for the convenience of back-patching the next two commits.
Christian Ullrich and Noah Misch, reviewed (in earlier versions) by
Michael Paquier.
Must do pg_stat_clear_snapshot() inside test's loop, or our snapshot of
pg_stat_activity will never change :-(. Thinko in b3427dade -- evidently
my workstation never really iterated the loop in testing. Per buildfarm.
deleteWhatDependsOn() had grown an uncomfortably large number of
assumptions about what it's used for. There are actually only two minor
differences between what it does and what a regular performDeletion() call
can do, so let's invent additional bits in performDeletion's existing flags
argument that specify those behaviors, and get rid of deleteWhatDependsOn()
as such. (We'd probably have done it this way from the start, except that
performDeletion didn't originally have a flags argument, IIRC.)
Also, add a SKIP_EXTENSIONS flag bit that prevents ever recursing to an
extension, and use that when dropping temporary objects at session end.
This provides a more general solution to the problem addressed in a hacky
way in commit 08dd23cec: if an extension script creates temp objects and
forgets to remove them again, the whole extension went away when its
contained temp objects were deleted. The previous solution only covered
temp relations, but this solves it for all object types.
These changes require minor additions in dependency.c to pass the flags
to subroutines that previously didn't get them, but it's still a net
savings of code, and it seems cleaner than before.
Having done this, revert the special-case code added in 08dd23cec that
prevented addition of pg_depend records for temp table extension
membership, because that caused its own oddities: dropping an extension
that had created such a table didn't automatically remove the table,
leading to a failure if the table had another dependency on the extension
(such as use of an extension data type), or to a duplicate-name failure if
you then tried to recreate the extension. But we keep the part that
prevents the pg_temp_nnn schema from becoming an extension member; we never
want that to happen. Add a regression test case covering these behaviors.
Although this fixes some arguable bugs, we've heard few field complaints,
and any such problems are easily worked around by explicitly dropping temp
objects at the end of extension scripts (which seems like good practice
anyway). So I won't risk a back-patch.
Discussion: https://postgr.es/m/e51f4311-f483-4dd0-1ccc-abec3c405110@BlueTreble.com
Programmers discovered decades ago that it was useful to have a simple
interface for allocating and freeing memory, which is why malloc() and
free() were invented. Unfortunately, those handy tools don't work
with dynamic shared memory segments because those are specific to
PostgreSQL and are not necessarily mapped at the same address in every
cooperating process. So invent our own allocator instead. This makes
it possible for processes cooperating as part of parallel query
execution to allocate and free chunks of memory without having to
reserve them prior to the start of execution. It could also be used
for longer lived objects; for example, we could consider storing data
for pg_stat_statements or the stats collector in shared memory using
these interfaces, rather than writing them to files. Basically,
anything that needs shared memory but can't predict in advance how
much it's going to need might find this useful.
Thomas Munro and Robert Haas. The original code (of mine) on which
Thomas based his work was actually designed to be a new backend-local
memory allocator for PostgreSQL, but that hasn't gone anywhere - or
not yet, anyway. Thomas took that work and performed major
refactoring and extensive modifications to make it work with dynamic
shared memory, including the addition of appropriate locking.
Discussion: CA+TgmobkeWptGwiNa+SGFWsTLzTzD-CeLz0KcE-y6LFgoUus4A@mail.gmail.com
Discussion: CAEepm=1z5WLuNoJ80PaCvz6EtG9dN0j-KuHcHtU6QEfcPP5-qA@mail.gmail.com
This is intended as infrastructure for a full-fledged allocator for
dynamic shared memory. The interface looks a bit like a real
allocator, but only supports allocating and freeing memory in
multiples of the 4kB page size. Further, to free memory, you must
know the size of the span you wish to free, in pages. While these are
make it unsuitable as an allocator in and of itself, it still serves
as very useful scaffolding for a full-fledged allocator.
Robert Haas and Thomas Munro. This code is mostly the same as my 2014
submission, but Thomas fixed quite a few bugs and made some changes to
the interface.
Discussion: CA+TgmobkeWptGwiNa+SGFWsTLzTzD-CeLz0KcE-y6LFgoUus4A@mail.gmail.com
Discussion: CAEepm=1z5WLuNoJ80PaCvz6EtG9dN0j-KuHcHtU6QEfcPP5-qA@mail.gmail.com
C doesn't have any sort of built-in understanding of a pointer
relative to some arbitrary base address, but dynamic shared memory
segments can be mapped at different addresses in different processes,
so any sort of shared data structure stored within a dynamic shared
memory segment can't use absolute pointers. We could use something
like Size to represent a relative pointer, but then the compiler
provides no type-checking. Use stupid macro tricks to get some
type-checking.
Patch originally by me. Concept suggested by Andres Freund. Recently
resubmitted as part of Thomas Munro's work on dynamic shared memory
allocation.
Discussion: 20131205144434.GG12398@alap2.anarazel.de
Discussion: CAEepm=1z5WLuNoJ80PaCvz6EtG9dN0j-KuHcHtU6QEfcPP5-qA@mail.gmail.com
Increase the default value of the existing max_worker_processes GUC
from 8 to 16, and add a new max_parallel_workers GUC with a maximum
of 8. This way, even if the maximum amount of parallel query is
happening, there is still room for background workers that do other
things, as originally envisioned when max_worker_processes was added.
Julien Rouhaud, reviewed by Amit Kapila and by revised by me.
Our documentation states that our maximum field size is 1 GB, and that
our maximum row size of 1.6 TB. However, while this might be attainable
in theory with enough contortions, it is not workable in practice; for
starters, pg_dump fails to dump tables containing rows larger than 1 GB,
even if individual columns are well below the limit; and even if one
does manage to manufacture a dump file containing a row that large, the
server refuses to load it anyway.
This commit enables dumping and reloading of such tuples, provided two
conditions are met:
1. no single column is larger than 1 GB (in output size -- for bytea
this includes the formatting overhead)
2. the whole row is not larger than 2 GB
There are three related changes to enable this:
a. StringInfo's API now has two additional functions that allow creating
a string that grows beyond the typical 1GB limit (and "long" string).
ABI compatibility is maintained. We still limit these strings to 2 GB,
though, for reasons explained below.
b. COPY now uses long StringInfos, so that pg_dump doesn't choke
trying to emit rows longer than 1GB.
c. heap_form_tuple now uses the MCXT_ALLOW_HUGE flag in its allocation
for the input tuple, which means that large tuples are accepted on
input. Note that at this point we do not apply any further limit to the
input tuple size.
The main reason to limit to 2 GB is that the FE/BE protocol uses 32 bit
length words to describe each row; and because the documentation is
ambiguous on its signedness and libpq does consider it signed, we cannot
use the highest-order bit. Additionally, the StringInfo API uses "int"
(which is 4 bytes wide in most platforms) in many places, so we'd need
to change that API too in order to improve, which has lots of fallout.
Backpatch to 9.5, which is the oldest that has
MemoryContextAllocExtended, a necessary piece of infrastructure. We
could apply to 9.4 with very minimal additional effort, but any further
than that would require backpatching "huge" allocations too.
This is the largest set of changes we could find that can be
back-patched without breaking compatibility with existing systems.
Fixing a bigger set of problems (for example, dumping tuples bigger than
2GB, or dumping fields bigger than 1GB) would require changing the FE/BE
protocol and/or changing the StringInfo API in an ABI-incompatible way,
neither of which would be back-patchable.
Authors: Daniel Vérité, Álvaro Herrera
Reviewed by: Tomas Vondra
Discussion: https://postgr.es/m/20160229183023.GA286012@alvherre.pgsql
The whole walreceiver API is now wrapped into a struct, like most of our
other loadable module APIs. The libpq connection is no longer a global
variable in libpqwalreceiver. Instead, it is encapsulated into a struct
that is passed around the functions. This allows multiple walreceivers
to run at the same time.
Add some rudimentary support for logical replication connections to
libpqwalreceiver.
These changes are mostly cosmetic and are going to be useful for the
future logical replication patches.
From: Petr Jelinek <petr@2ndquadrant.com>
Replace use of poll()/select() by WaitLatchOrSocket(), which is more
portable and flexible.
Also change walreceiver to use its procLatch instead of a custom latch.
From: Petr Jelinek <petr@2ndquadrant.com>
This works like function_with_argtypes, but aggregates allow slightly
different arguments.
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
It was apparently added for use by GRANT/REVOKE, but move it closer to
where other function signature related things are kept.
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Instead of sometimes referring to a function signature like func_name
func_args, use the existing function_with_argtypes symbol, which
combines the two.
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Commit 274bb2b385 caused PQhost() to
return the value of the hostaddr parameter rather than the relevant
host when the latter parameter was specified. That's wrong. Commit
9a1d0af4ad then amplified the damage by
using PQhost() in more places, so that the SSL test suite started
failing.
Report by Andreas Karlsson; patch by me.
So far the hashtable stored representative tuples in the form of its
input slot, with all columns in the hashtable that are not
needed (i.e. not grouped upon or functionally dependent) set to NULL.
Thats good for saving memory, but it turns out that having tuples full
of NULL isn't free. slot_deform_tuple is faster if there's no NULL
bitmap even if no NULLs are encountered, and skipping over leading NULLs
isn't free.
So compute a separate tuple descriptor that only contains the needed
columns. As columns have already been moved in/out the slot for the
hashtable that does not imply additional per-row overhead.
Author: Andres Freund
Reviewed-By: Heikki Linnakangas
Discussion: https://postgr.es/m/20161103110721.h5i5t5saxfk5eeik@alap3.anarazel.de
Previously we did a ExecProject() for each individual aggregate
argument. That turned out to be a performance bottleneck in queries with
multiple aggregates.
Doing all the argument computations in one ExecProject() is quite a bit
cheaper because ExecProject's fastpath can do the work at once in a
relatively tight loop, and because it can get all the required columns
with a single slot_getsomeattr and save some other redundant setup
costs.
Author: Andres Freund
Reviewed-By: Heikki Linnakangas
Discussion: https://postgr.es/m/20161103110721.h5i5t5saxfk5eeik@alap3.anarazel.de
Previously, the right to split a bucket was represented by a
heavyweight lock on the page number of the primary bucket page.
Unfortunately, this meant that every scan needed to take a heavyweight
lock on that bucket also, which was bad for concurrency. Instead, use
a cleanup lock on the primary bucket page to indicate the right to
begin a split, so that scans only need to retain a pin on that page,
which is they would have to acquire anyway, and which is also much
cheaper.
In addition to reducing the locking cost, this also avoids locking out
scans and inserts for the entire lifetime of the split: while the new
bucket is being populated with copies of the appropriate tuples from
the old bucket, scans and inserts can happen in parallel. There are
minor concurrency improvements for vacuum operations as well, though
the situation there is still far from ideal.
This patch also removes the unworldly assumption that a split will
never be interrupted. With the new code, a split is done in a series
of small steps and the system can pick up where it left off if it is
interrupted prior to completion. While this patch does not itself add
write-ahead logging for hash indexes, it is clearly a necessary first
step, since one of the things that could interrupt a split is the
removal of electrical power from the machine performing it.
Amit Kapila. I wrote the original design on which this patch is
based, and did a good bit of work on the comments and README through
multiple rounds of review, but all of the code is Amit's. Also
reviewed by Jesper Pedersen, Jeff Janes, and others.
Discussion: http://postgr.es/m/CAA4eK1LfzcZYxLoXS874Ad0+S-ZM60U9bwcyiUZx9mHZ-KCWhw@mail.gmail.com
Generate EUC_CN mappings from gb-18030-2000.xml, because GB2312.TXT is no
longer available.
Get UHC from windows-949-2000.xml, it's more up-to-date.
Plus tons more small changes. With these changes, the perl scripts
faithfully produce the *.map files we have in the repository, from the
external source files.
In the passing, fix the Makefile to also download CP932.TXT and CP950.TXT.
Based on patches by Kyotaro Horiguchi, reviewed by Daniel Gustafsson.
Discussion: https://postgr.es/m/08e7892a-d55c-eefe-76e6-7910bc8dd1f3@iki.fi
The common style is to pad to 4 digits.
Running the current perl scripts to generate these map files would override
this change, but the next commit will rewrite the perl scripts to produce
this style. I'm doing this as a separate commit, to make it more clear what
non-cosmetic changes the next commit makes to the map files.
Discussion: https://postgr.es/m/08e7892a-d55c-eefe-76e6-7910bc8dd1f3@iki.fi
PostgreSQL treats characters with < 0x80 leading byte as plain ASCII, and
they are not even passed to the conversion routines. There is no point in
having them in the conversion tables.
Everything in the tables were direct ASCII-ASCII mappings, except for two:
* SHIFT_JIS_2004 code point 0x5C (backslash in ASCII) was mapped to Unicode
YEN SIGN character.
* Unicode 0x5C (backslash again) was mapped to "REVERSE SOLIDUS" in
SHIFT_JIS_2004
These mappings never had any effect, so there's no functional change from
removing them.
Discussion: https://postgr.es/m/08e7892a-d55c-eefe-76e6-7910bc8dd1f3@iki.fi
consider_parallel_nestloop passed the wrong jointype down to its
subroutines for JOIN_UNIQUE_INNER cases (it should pass JOIN_INNER), and it
thought that it could pass paths other than innerrel->cheapest_total_path
to create_unique_path, which create_unique_path is not on board with.
These bugs would lead to assertion failures or other errors, suggesting
that this code path hasn't been tested much.
hash_inner_and_outer's code for parallel join effectively treated both
JOIN_UNIQUE_OUTER and JOIN_UNIQUE_INNER the same as JOIN_INNER (for
different reasons :-(), leading to incorrect plans that treated a semijoin
as if it were a plain join.
Michael Day submitted a test case demonstrating that hash_inner_and_outer
failed for JOIN_UNIQUE_OUTER, and I found the other cases through code
review.
Report: https://postgr.es/m/D0E8A029-D1AC-42E8-979A-5DE4A77E4413@rcmail.com
If we don't have any MCV statistics for the inner relation, and we don't
trust its numdistinct estimate either, eqjoinsel_semi falls back to a very
conservative estimate (that 50% of the outer rows have matches). This is
particularly problematic if the inner relation is completely empty, since
then even an explicit ANALYZE won't produce any pg_statistic entries,
so there's no way to budge the planner off the bad estimate.
We'd produce a better estimate in such cases if we used the nd2/nd1
selectivity heuristic, so an easy fix is to treat the nd2 estimate as
non-default if we derive it from clamping to the inner rel's rowcount
estimate. This won't fix every related case (mainly because the rowcount
estimate might be larger than DEFAULT_NUM_DISTINCT), but it seems like a
sane extension of the existing logic, so let's apply the change in HEAD
and see if anyone complains. Per bug #14438 from Nikolay Nikitin.
Report: https://postgr.es/m/20161128182113.6527.58926@wrigleys.postgresql.org
Discussion: https://postgr.es/m/31089.1480384713@sss.pgh.pa.us
Commit 274bb2b385 made it possible to
specify multiple IPs in a connection string, but that's not good
enough for the case where you have a read-write master and a bunch of
read-only standbys and want to connect to whichever server is the
master at the current time. This commit allows that, by making it
possible to specify target_session_attrs=read-write as a connection
parameter.
There was extensive discussion of the best name for the connection
parameter and its values as well as the best way to distinguish master
and standbys. For now, adopt the same solution as JDBC: if the user
wants a read-write connection, issue 'show transaction_read_only' and
rejection the connection if the result is 'on'. In the future, we
could add additional values of this new target_session_attrs parameter
that issue different queries; or we might have some way of
distinguishing the server type without resorting to an SQL query; but
right now, we have this, and that's (hopefully) a good start.
Victor Wagner and Mithun Cy. Design review by Álvaro Herrera, Catalin
Iacob, Takayuki Tsunakawa, and Craig Ringer; code review by me. I
changed Mithun's patch to skip all remaining IPs for a host if we
reject a connection based on this new parameter, rewrote the
documentation, and did some other cosmetic cleanup.
Discussion: http://postgr.es/m/CAD__OuhqPRGpcsfwPHz_PDqAGkoqS1UvnUnOnAB-LBWBW=wu4A@mail.gmail.com
Add an option to exclude blobs when running pg_dump. By default, blobs
are included but this option can be used to exclude them while keeping
the rest of the dump.
Commment updates and regression tests from me.
Author: Guillaume Lelarge
Reviewed-by: Amul Sul
Discussion: https://postgr.es/m/VisenaEmail.48.49926ea6f91dceb6.15355a48249@tc7-visena
Oversight in my commit 0bb51aa96. Noted while poking at a recent
bug report --- HEAD's estimates for a query using CURRENT_DATE
were unexpectedly much worse than 9.6's.
Commit a734fd5d1 exposed some race conditions that existed previously
in the autovac code, but were basically harmless because autovac would
not try to delete orphaned relations immediately. Specifically, the test
for orphaned-ness was made on a pg_class tuple that might be dead by now,
allowing autovac to try to remove a table that the owning backend had just
finished deleting. This resulted in a hard crash due to inadequate caution
about accessing the table's catalog entries without any lock. We must take
a relation lock and then recheck whether the table is still present and
still looks deletable before we do anything.
Also, it seemed to me that deleting multiple tables per transaction, and
trying to continue after errors, represented unjustifiable complexity.
We do not expect this code path to be taken often in the field, nor even
during testing, which means that prioritizing performance over correctness
is a bad tradeoff. Rip all that out in favor of just starting a new
transaction after each successful temp table deletion. If we're unlucky
enough to get an error, which shouldn't happen anyway now that we're being
more cautious, let the autovacuum worker fail as it normally would.
In passing, improve the order of operations in the initial scan loop.
Now that we don't care about whether a temp table is a wraparound hazard,
there's no need to perform extract_autovac_opts, get_pgstat_tabentry_relid,
or relation_needs_vacanalyze for temp tables.
Also, if GetTempNamespaceBackendId returns InvalidBackendId (indicating
it doesn't recognize the schema as temp), treat that as meaning it's NOT
an orphaned temp table, not that it IS one, which is what happened before
because BackendIdGetProc necessarily failed. The case really shouldn't
come up for a table that has RELPERSISTENCE_TEMP, but the consequences
if it did seem undesirable. (This might represent a back-patchable bug
fix; not sure if it's worth the trouble.)
Discussion: https://postgr.es/m/21299.1480272347@sss.pgh.pa.us
Commit 08dd23cec introduced an exception to the rule that extension member
objects can only be dropped as part of dropping the whole extension,
intending to allow such drops while running the extension's own creation or
update scripts. However, the exception was only applied at the outermost
recursion level, because it was modeled on a pre-existing check to ignore
dependencies on objects listed in pendingObjects. Bug #14434 from Philippe
Beaudoin shows that this is inadequate: in some cases we can reach an
extension member object by recursion from another one. (The bug concerns
the serial-sequence case; I'm not sure if there are other cases, but there
might well be.)
To fix, revert 08dd23cec's changes to findDependentObjects() and instead
apply the creating_extension exception regardless of stack level.
Having seen this example, I'm a bit suspicious that the pendingObjects
logic is also wrong and such cases should likewise be allowed at any
recursion level. However, changing that would interact in subtle ways
with the recursion logic (at least it would need to be moved to after the
recursing-from check). Given that the code's been like that a long time,
I'll refrain from touching it without a clear example showing it's wrong.
Back-patch to all active branches. In HEAD and 9.6, where suitable
test infrastructure exists, add a regression test case based on the
bug report.
Report: <20161125151448.6529.33039@wrigleys.postgresql.org>
Discussion: <13224.1480177514@sss.pgh.pa.us>
Instead of confusingly stating platform-dependent defaults for these
parameters in the comments in postgresql.conf.sample (with the main
entry being a lie on Linux), teach initdb to install the correct
platform-dependent value in postgresql.conf, similarly to the way
we handle other platform-dependent defaults. This won't do anything
for existing 9.6 installations, but since it's effectively only a
documentation improvement, that seems OK.
Since this requires initdb to have access to the default values,
move the #define's for those to pg_config_manual.h; the original
placement in bufmgr.h is unworkable because that file can't be
included by frontend programs.
Adjust the default value for wal_writer_flush_after so that it is 1MB
regardless of XLOG_BLCKSZ, conforming to what is stated in both the
SGML docs and postgresql.conf. (We could alternatively make it scale
with XLOG_BLCKSZ, but I'm not sure I see the point.)
Copy-edit related SGML documentation.
Fabien Coelho and Tom Lane, per a gripe from Tomas Vondra.
Discussion: <30ebc6e3-8358-09cf-44a8-578252938424@2ndquadrant.com>
Andreas Seltenreich found another case where we were being too optimistic
about allowing a plan to be considered parallelizable despite it containing
initPlans. It seems like the real issue here is that if we know we are
going to tack initPlans onto the topmost Plan node for a subquery, we
had better mark that subquery's result Paths as not-parallel-safe. That
fixes this problem and allows reversion of a kluge (added in commit
7b67a0a49 and extended in f24cf960d) to not trust the parallel_safe flag
at top level.
Discussion: <874m2w4k5d.fsf@ex.ansel.ydns.eu>
When dropping a foreign key constraint with ALTER TABLE DROP CONSTRAINT,
we refuse the drop if there are any pending trigger events on the named
table; this ensures that we won't remove the pg_trigger row that will be
consulted by those events. But we should make the same check for the
referenced relation, else we might remove a due-to-be-referenced pg_trigger
row for that relation too, resulting in "could not find trigger NNN" or
"relation NNN has no triggers" errors at commit. Per bug #14431 from
Benjie Gillam. Back-patch to all supported branches.
Report: <20161124114911.6530.31200@wrigleys.postgresql.org>
Previously, requesting commit timestamp for transactions
FrozenTransactionId and BootstrapTransactionId resulted in an error.
But since those values can validly appear in committed tuples' Xmin,
this behavior is unhelpful and error prone: each caller would have to
special-case those values before requesting timestamp data for an Xid.
We already have a perfectly good interface for returning "the Xid you
requested is too old for us to have commit TS data for it", so let's use
that instead.
Backpatch to 9.5, where commit timestamps appeared.
Author: Craig Ringer
Discussion: https://www.postgresql.org/message-id/CAMsr+YFM5Q=+ry3mKvWEqRTxrB0iU3qUSRnS28nz6FJYtBwhJg@mail.gmail.com
When rebuilding an existing index, ALTER TABLE correctly kept the
physical file in the same tablespace, but it messed up the pg_class
entry if the index had been in the database's default tablespace
and "default_tablespace" was set to some non-default tablespace.
This led to an inaccessible index.
Fix by fixing pg_get_indexdef_string() to always include a tablespace
clause, whether or not the index is in the default tablespace. The
previous behavior was installed in commit 537e92e41, and I think it just
wasn't thought through very clearly; certainly the possible effect of
default_tablespace wasn't considered. There's some risk in changing the
behavior of this function, but there are no other call sites in the core
code. Even if it's being used by some third party extension, it's fairly
hard to envision a usage that is okay with a tablespace clause being
appended some of the time but can't handle it being appended all the time.
Back-patch to all supported versions.
Code fix by me, investigation and test cases by Michael Paquier.
Discussion: <1479294998857-5930602.post@n3.nabble.com>
A new thing also called a "barrier" is proposed, but whether we decide
to take that patch or not, this file seems to have outlived its
usefulness.
Thomas Munro
Avoid memory leak in conninfo_uri_parse_options. Use the current host
rather than the comma-separated list of host names when the host name
is needed for GSS, SSPI, or SSL authentication. Document the way
connect_timeout interacts with multiple host specifications.
Takayuki Tsunakawa
Previously, the right-hand side of a multiple-column assignment, if it
wasn't a sub-SELECT, had to be a simple parenthesized expression list,
because gram.y was responsible for "bursting" the construct into
independent column assignments. This had the minor defect that you
couldn't write ROW (though you should be able to, since the standard says
this is a row constructor), and the rather larger defect that unlike other
uses of row constructors, we would not expand a "foo.*" item into multiple
columns.
Fix that by changing the RHS to be just "a_expr" in the grammar, leaving
it to transformMultiAssignRef to separate the elements of a RowExpr;
which it will do only after performing standard transformation of the
RowExpr, so that "foo.*" behaves as expected.
The key reason we didn't do that before was the hard-wired handling of
DEFAULT tokens (SetToDefault nodes). This patch deals with that issue by
allowing DEFAULT in any a_expr and having parse analysis throw an error
if SetToDefault is found in an unexpected place. That's an improvement
anyway since the error can be more specific than just "syntax error".
The SQL standard suggests that the RHS could be any a_expr yielding a
suitable row value. This patch doesn't really move the goal posts in that
respect --- you're still limited to RowExpr or a sub-SELECT --- but it does
fix the grammar restriction, so it provides some tangible progress towards
a full implementation. And the limitation is now documented by an explicit
error message rather than an unhelpful "syntax error".
Discussion: <8542.1479742008@sss.pgh.pa.us>
Condition variables provide a flexible way to sleep until a
cooperating process causes an arbitrary condition to become true. In
simple cases, this can be accomplished with a WaitLatch/ResetLatch
loop; the cooperating process can call SetLatch after performing work
that might cause the condition to be satisfied, and the waiting
process can recheck the condition each time. However, if the process
performing the work doesn't have an easy way to identify which
processes might be waiting, this doesn't work, because it can't
identify which latches to set. Condition variables solve that problem
by internally maintaining a list of waiters; a process that may have
caused some waiter's condition to be satisfied must "signal" or
"broadcast" on the condition variable.
Robert Haas and Thomas Munro
The code was intentionally not very careful about leaking strdup'd
strings in case of an error. That was forgivable probably, but it
also failed to notice strdup() failures, which could lead to subsequent
null-pointer-dereference crashes, since many callers unsurprisingly
didn't check for null pointers in the struct lconv fields. An even
worse problem is that it could throw error while we were setlocale'd
to a non-C locale, causing unwanted behavior in subsequent libc calls.
Rewrite to ensure that we cannot throw elog(ERROR) until after we've
restored the previous locale settings, or at least attempted to.
(I'm sorely tempted to make restore failure be a FATAL error, but
will refrain for the moment.) Having done that, it's not much more
work to ensure that we clean up strdup'd storage on the way out, too.
This code is substantially the same in all supported branches, so
back-patch all the way.
Michael Paquier and Tom Lane
Discussion: <CAB7nPqRMbGqa_mesopcn4MPyTs34eqtVEK7ELYxvvV=oqS00YA@mail.gmail.com>
Fix thinko in commit da1c91631: even if the original query was free of
parallel hazards, we might introduce such a hazard by adding PARAM_EXEC
Param nodes. Adjust is_parallel_safe() so that it will scan the given
expression whenever any such nodes have been created. Per report from
Andreas Seltenreich.
Discussion: <878tse6yvf.fsf@credativ.de>
Previously, we only dropped an orphan temp table when it became old
enough to threaten wraparound; instead, doing it immediately. The
only value of waiting is that someone might be able to examine the
contents of the orphan temp table for forensic purposes, but it's
pretty difficult to actually do that and few users will wish to do so.
On the flip side, not performing the drop immediately generates log
spam and bloats pg_class.
In addition, per a report from Grigory Smolkin, if a temporary schema
contains a very large number of temporary tables, a backend attempting
to clear the temporary schema might fail due to lock table exhaustion.
It's helpful for autovacuum to clean up after such cases, and we don't
want it to wait for wraparound to threaten before doing so. To
prevent autovacuum from failing in the same manner as a backend trying
to drop an entire temp schema, remove orphan temp tables in batches of
50, committing after each batch, so that we don't accumulate an
unbounded number of locks. If a drop fails, retry other orphan tables
that need to be dropped up to 10 times before giving up. With this
system, if a backend does fail to clean a temporary schema due to
lock table exhaustion, autovacuum should hopefully put things right
the next time it processes the database.
Discussion: CAB7nPqSbYT6dRwsXVgiKmBdL_ARemfDZMPA+RPeC_ge0GK70hA@mail.gmail.com
Michael Paquier, with a bunch of comment changes by me.
We mustn't force parallel mode if the query has any subplans, since
ExecSerializePlan doesn't transmit them to workers. Testing
top_plan->initPlan is inadequate because (1) there might be initPlans
attached to lower plan nodes, and (2) non-initPlan subplans don't
work either. There's certainly room for improvement in those
restrictions, but for the moment that's what we've got.
Amit Kapila, per report from Andreas Seltenreich
Discussion: <8737im6pmh.fsf@credativ.de>
Because we use transformTargetList() for UPDATE as well as SELECT
tlists, the code accidentally tried to expand a "*" reference into
several columns. This is nonsensical, because the UPDATE syntax
provides exactly one target column to put the value into. The
immediate result was that transformUpdateTargetList() got confused
and reported "UPDATE target count mismatch --- internal error".
It seems better to treat such a reference as a plain whole-row
variable, as it would be in other contexts. (This could produce
useful results when the target column is of composite type.)
Fix by tweaking transformTargetList() to perform *-expansion only
conditionally, depending on its exprKind parameter.
Back-patch to 9.3. The problem exists further back, but a fix would be
much more invasive before that, because transformTargetList() wasn't
told what kind of list it was working on. Doesn't seem worth the
trouble given the lack of field reports. (I only noticed it because
I was checking the code while trying to improve the documentation about
how we handle "foo.*".)
Discussion: <4308.1479595330@sss.pgh.pa.us>
create_merge_append_path should use the path rowcount it just computed,
not rel->tuples, for costing purposes. Those numbers should always be
the same at present, but if we ever support parameterized MergeAppend
paths (a case this function is otherwise prepared for), the former would
be right and the latter wrong.
No need for back-patch since the problem is only latent.
Ashutosh Bapat
Discussion: <CAFjFpRek+cLCnTo24youuGtsq4zRphEB8EUUPjDxZjnL4n4HYQ@mail.gmail.com>
The serialization code dumped core for a string-valued GUC whose value
is NULL, which is a legal state. The infrastructure isn't capable of
transmitting that state exactly, but fortunately, transmitting an empty
string instead should be close enough (compare, eg, commit e45e990e4).
The code potentially underestimated the space required to format a
real-valued variable, both because it made an unwarranted assumption that
%g output would never be longer than %e output, and because it didn't count
right even for %e format. In practice this would pretty much always be
masked by overestimates for other variables, but it's still wrong.
Also fix boundary-case error in read_gucstate, incorrect handling of the
case where guc_sourcefile is non-NULL but zero length (not clear that can
happen, but if it did, this code would get totally confused), and
confusingly useless check for a NULL result from read_gucstate.
Andreas Seltenreich discovered the core dump; other issues noted while
reading nearby code. Back-patch to 9.5 where this code was introduced.
Michael Paquier and Tom Lane
Discussion: <871sy78wno.fsf@credativ.de>
Like pg_tables, pg_views, and others, this view contains information
about sequences in a way that is independent of the system catalog
layout but more comprehensive than the information schema.
To help implement the view, add a new internal function
pg_sequence_last_value() to return the last value of a sequence. This
is kept separate from pg_sequence_parameters() to separate querying
run-time state from catalog-like information.
Reviewed-by: Andreas Karlsson <andreas@proxel.se>
Add a loop to check that each test covers all of the pg_dump runs. We
(I) had been a bit sloppy when adding new runs and not making sure to
mark if they should be under like or unlike for each test, this loop
makes sure that the test system will complain if any are forgotten in
the future.
The loop also correctly handles the 'catch all' cases, which are used to
avoid running unnecessary specific checks when a single catch-all can be
done (eg: a no-acl run should not have any GRANT commands).
Also, re-enable the testing of blobs, but use lo_from_bytea() instead of
trying to be cute and writing out to a file and then reading it back in
with psql, which proved to be difficult for some buildfarm members.
This allows us to add support for testing the --no-blobs option which
will be getting added shortly, provided the buildfarm doesn't blow up on
this.
The debug messages that merely print StartTransactionCommand,
CommitTransactionCommand, ProcessUtilty, or ProcessQuery with no
additional details seem to be useless. Get rid of them.
The transaction status messages produced by ShowTransactionState are
occasionally useful, but they are extremely verbose, producing
multiple lines of log output every time they fire, which can happens
multiple times per transaction. So, reduce the level to DEBUG5; avoid
emitting an extra line just to explain which debug point is at issue;
and tighten up the rest of the message so it doesn't use quite so much
horizontal space.
With these changes, it's possible to run a somewhat busy system with a
log level even as high as DEBUG4, whereas previously anything above
DEBUG2 would flood the log with output that probably wasn't really all
that useful.
pg_dump's traditional solution for breaking a circular dependency involving
a view was to create the view with CREATE TABLE and then later issue CREATE
RULE "_RETURN" ... to convert the table to a view, relying on the backend's
very very ancient code that supports making views that way. We've wanted
to get rid of that kluge for a long time, but the thing that finally
motivates doing something about it is the recognition that this method
fails with the --clean option, because it leads to issuing DROP RULE
"_RETURN" followed by DROP TABLE --- and the backend won't let you drop a
view's _RETURN rule.
Instead, let's break circular dependencies by initially creating the view
using CREATE VIEW AS SELECT NULL::columntype AS columnname, ... (so that
it has the right column names and types to support external references,
but no dependencies beyond the column data types), and then later dumping
the ON SELECT rule using the spelling CREATE OR REPLACE VIEW. This method
wasn't available when this code was originally written, but it's been
possible since PG 7.3, so it seems fine to start relying on it now.
To solve the --clean problem, make the dropStmt for an ON SELECT rule
be CREATE OR REPLACE VIEW with the same dummy target list as above.
In this way, during the DROP phase, we first reduce the view to have
no extra dependencies, and then we can drop it entirely when we've
gotten rid of whatever had a circular dependency on it.
(Note: this should work adequately well with the --if-exists option, since
the CREATE OR REPLACE VIEW will go through whether the view exists or not.
It could fail if the view exists with a conflicting column set, but we
don't really support --clean against a non-matching database anyway.)
This allows cleaning up some other kluges inside pg_dump, notably that
we don't need a notion of reloptions attached to a rule anymore.
Although this is a bug fix, commit to HEAD only for now. The problem's
existed for a long time and we've had relatively few complaints, so it
doesn't really seem worth taking risks to fix it in the back branches.
We might revisit that choice if no problems emerge.
Discussion: <19092.1479325184@sss.pgh.pa.us>
Teach it not to complain if the dropStmt attached to an archive entry
is actually spelled CREATE OR REPLACE VIEW, since that will happen due to
an upcoming bug fix. Also, if it doesn't recognize a dropStmt, have it
print a WARNING and then emit the dropStmt unmodified. That seems like a
much saner behavior than Assert'ing or dumping core due to a null-pointer
dereference, which is what would happen before :-(.
Back-patch to 9.4 where this option was introduced.
Discussion: <19092.1479325184@sss.pgh.pa.us>
Replay of XLOG_BTREE_VACUUM during Hot Standby was previously thought to
require complex interlocking that matched the requirements on the
master. This required an O(N) operation that became a significant
problem with large indexes, causing replication delays of seconds or in
some cases minutes while the XLOG_BTREE_VACUUM was replayed.
This commit skips the “pin scan” that was previously required, by
observing in detail when and how it is safe to do so, with full
documentation. The pin scan is skipped only in replay; the VACUUM code
path on master is not touched here.
No tests included. Manual tests using an additional patch to view WAL records
and their timing have shown the change in WAL records and their handling has
successfully reduced replication delay.
This is a back-patch of commits 687f2cd7a0, 3e4b7d8798, b602842613
by Simon Riggs, to branches 9.4 and 9.5. No further backpatch is
possible because this depends on catalog scans being MVCC. I (Álvaro)
additionally updated a slight problem in the README, which explains why
this touches the 9.6 and master branches.
Previously, the handle for the control segment could not be zero, but
some other DSM segment could potentially have a handle value of zero.
However, that means that if someone wanted to store a dsm_handle that
might or might not be valid, they would need a separate boolean to
keep track of whether the associated value is legal. That's annoying,
so change things so that no DSM segment can ever have a handle of 0 -
or as we call it here, DSM_HANDLE_INVALID.
Thomas Munro. This was submitted as part of a much larger patch to
add an malloc-like allocator for dynamic shared memory, but this part
seems like a good idea independently of the rest of the patch.
On Windows, libc will mask \r\n line endings for us, since we read the
password file in text mode. But that doesn't happen on Unix. People
who share password files across both systems might have \r\n line endings
in a file they use on Unix, so as a convenience, ignore trailing \r.
Per gripe from Josh Berkus.
In passing, put the existing check for empty line somewhere where it's
actually useful, ie after stripping the newline not before.
Vik Fearing, adjusted a bit by me
Discussion: <0de37763-5843-b2cc-855e-5d0e5df25807@agliodbs.com>
The CatalogSnapshot was not plugged into SnapshotResetXmin()'s accounting
for whether MyPgXact->xmin could be cleared or advanced. In normal
transactions this was masked by the fact that the transaction snapshot
would be older, but during backend startup and certain utility commands
it was possible to re-use the CatalogSnapshot after MyPgXact->xmin had
been cleared, meaning that recently-deleted rows could be pruned even
though this snapshot could still see them, causing unexpected catalog
lookup failures. This effect appears to be the explanation for a recent
failure on buildfarm member piculet.
To fix, add the CatalogSnapshot to the RegisteredSnapshots heap whenever
it is valid.
In the previous logic, it was possible for the CatalogSnapshot to remain
valid across waits for client input, but with this change that would mean
it delays advance of global xmin in cases where it did not before. To
avoid possibly causing new table-bloat problems with clients that sit idle
for long intervals, add code to invalidate the CatalogSnapshot before
waiting for client input. (When the backend is busy, it's unlikely that
the CatalogSnapshot would be the oldest snap for very long, so we don't
worry about forcing early invalidation of it otherwise.)
In passing, remove the CatalogSnapshotStale flag in favor of using
"CatalogSnapshot != NULL" to represent validity, as we do for the other
special snapshots in snapmgr.c. And improve some obsolete comments.
No regression test because I don't know a deterministic way to cause this
failure. But the stress test shown in the original discussion provokes
"cache lookup failed for relation 1255" within a few dozen seconds for me.
Back-patch to 9.4 where MVCC catalog scans were introduced. (Note: it's
quite easy to produce similar failures with the same test case in branches
before 9.4. But MVCC catalog scans were supposed to fix that.)
Discussion: <16447.1478818294@sss.pgh.pa.us>
Commit 41124a91e6 allowed the
transaction log file prefix to be changed but left in place the
existing 64-character limit on the total length of a log file name.
It's possible that could be inconvenient for somebody, so increase the
limit to MAXPGPATH, which ought to be enough for anybody.
Per a suggestion from Tom Lane.
This allows us to avoid running the regression tests in contrib modules
like pg_stat_statement in a less ugly manner.
Discussion: <22432.1478968242@sss.pgh.pa.us>
Add a new optional Makefile variable PROVE_TESTS that, if passed as a
space-separated list of paths relative to the Makefile invoking
$(prove_check) or $(prove_installcheck), runs just those tests instead
of t/*.pl .
From: Craig Ringer <craig@2ndquadrant.com>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Previously, pg_upgrade migrated sequence data like tables by copying the
on-disk file. This does not allow any changes in the on-disk format for
sequences. It's simpler to just have pg_dump set the new sequence
values as it normally does. To do that, create a hidden submode in
pg_dump that dumps sequence data even when a schema-only dump is
requested, and trigger that submode in binary upgrade mode. (This new
submode could easily be exposed as a command-line option, but it has
limited use outside of pg_dump and would probably cause some confusion,
so we don't do that at this time.)
Reviewed-by: Anastasia Lubennikova <a.lubennikova@postgrespro.ru>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Instead of handling both sequence data and table data internally as
"table data", handle sequences separately under a "sequence set" type.
We already handled materialized view data differently, so it makes the
code somewhat cleaner to handle each relation kind separately at the top
level.
This does not change the output format, since there already was a
separate "SEQUENCE SET" archive entry type. A noticeable difference is
that SEQUENCE SET entries now always appear after TABLE DATA entries.
And in parallel mode there is less sorting to do, because the sequence
data entries are no longer considered table data.
Reviewed-by: Anastasia Lubennikova <a.lubennikova@postgrespro.ru>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Be sure to pull up the subquery's hasRowSecurity flag when flattening a
subquery in pull_up_simple_subquery(). This isn't a bug today because
we don't look at the hasRowSecurity flag during planning, but it could
easily be a bug tomorrow.
Likewise, make rewriteRuleAction() pull up the hasRowSecurity flag when
absorbing RTEs from a rule action. This isn't a bug either, for the
opposite reason: the flag should never be set yet. But again, it seems
like good future proofing.
Add a comment explaining why rewriteTargetView() should *not* set
hasRowSecurity when adding stuff to securityQuals.
Improve some nearby comments about securityQuals processing, and document
that field more completely in parsenodes.h.
Patch by me, analysis by Dean Rasheed.
Discussion: <CAEZATCXZ8tb2DV6f=bkhsMV6u_gRcZ0CZBw2J-qU84RxSukZog@mail.gmail.com>
The reloptions stuff allows this option to be set on a matview.
While it's questionable whether that is useful or was really intended,
it does work, and we shouldn't change that in minor releases. Commit
e3e66d8a9 disabled the option since I didn't realize that it was
possible for it to be set on a matview. Tweak the test to re-allow it.
Discussion: <19749.1478711862@sss.pgh.pa.us>
We just pass the data to the INSTEAD trigger.
Haribabu Kommi, reviewed by Dilip Kumar
Patch: <CAJrrPGcSQkrNkO+4PhLm4B8UQQQmU9YVUuqmtgM=pmzMfxWaWQ@mail.gmail.com>
The plan generated for sorted partial aggregation with "GROUP BY constant"
included a Sort node with no sort keys, which the executor does not like.
Per report from Steve Randall. I'd add a regression test case if I could
think of a compact one, but it doesn't seem worth expending lots of cycles
on.
Report: <CABVd52UAdGXpg_rCk46egpNKYdXOzCjuJ1zG26E2xBe_8bj+Fg@mail.gmail.com>
The idea behind SPI_push was to allow transitioning back into an
"unconnected" state when a SPI-using procedure calls unrelated code that
might or might not invoke SPI. That sounds good, but in practice the only
thing it does for us is to catch cases where a called SPI-using function
forgets to call SPI_connect --- which is a highly improbable failure mode,
since it would be exposed immediately by direct testing of said function.
As against that, we've had multiple bugs induced by forgetting to call
SPI_push/SPI_pop around code that might invoke SPI-using functions; these
are much harder to catch and indeed have gone undetected for years in some
cases. And we've had to band-aid around some problems of this ilk by
introducing conditional push/pop pairs in some places, which really kind
of defeats the purpose altogether; if we can't draw bright lines between
connected and unconnected code, what's the point?
Hence, get rid of SPI_push[_conditional], SPI_pop[_conditional], and the
underlying state variable _SPI_curid. It turns out SPI_restore_connection
can go away too, which is a nice side benefit since it was never more than
a kluge. Provide no-op macros for the deleted functions so as to avoid an
API break for external modules.
A side effect of this removal is that SPI_palloc and allied functions no
longer permit being called when unconnected; they'll throw an error
instead. The apparent usefulness of the previous behavior was a mirage
as well, because it was depended on by only a few places (which I fixed in
preceding commits), and it posed a risk of allocations being unexpectedly
long-lived if someone forgot a SPI_push call.
Discussion: <20808.1478481403@sss.pgh.pa.us>
For ALTER TYPE .. RENAME, add "VALUE" to the list of possible
completions. Complete ALTER TYPE .. RENAME VALUE with possible
enum values. After that, complete with "TO".
Dagfinn Ilmari Mannsåker, reviewed by Artur Zakirov.
Invent a new function heap_modify_tuple_by_cols() that is functionally
equivalent to SPI_modifytuple except that it always allocates its result
by simple palloc. I chose however to make the API details a bit more
like heap_modify_tuple: pass a tupdesc rather than a Relation, and use
bool convention for the isnull array.
Use this function in place of SPI_modifytuple at all call sites where the
intended behavior is to allocate in current context. (There actually are
only two call sites left that depend on the old behavior, which makes me
wonder if we should just drop this function rather than keep it.)
This new function is easier to use than heap_modify_tuple() for purposes
of replacing a single column (or, really, any fixed number of columns).
There are a number of places where it would simplify the code to change
over, but I resisted that temptation for the moment ... everywhere except
in plpgsql's exec_assign_value(); changing that might offer some small
performance benefit, so I did it.
This is on the way to removing SPI_push/SPI_pop, but it seems like
good code cleanup in its own right.
Discussion: <9633.1478552022@sss.pgh.pa.us>
There's basically no scenario where it's sensible for this to match
dropped columns, so put a test for dropped-ness into SPI_fnumber()
itself, and excise the test from the small number of callers that
were paying attention to the case. (Most weren't :-(.)
In passing, normalize tests at call sites: always reject attnum <= 0
if we're disallowing system columns. Previously there was a mixture
of "< 0" and "<= 0" tests. This makes no practical difference since
SPI_fnumber() never returns 0, but I'm feeling pedantic today.
Also, in the places that are actually live user-facing code and not
legacy cruft, distinguish "column not found" from "can't handle
system column".
Per discussion with Jim Nasby; thi supersedes his original patch
that just changed the behavior at one call site.
Discussion: <b2de8258-c4c0-1cb8-7b97-e8538e5c975c@BlueTreble.com>
The intent of the test is to check whether XLOG_SEG_SIZE is in a
particular range, but actually in one case it compares XLOG_BLCKSZ
by mistake. Repair.
Commit 88e9823026 introduced this
faulty test.
Kuntal Ghosh, reviewed by Michael Paquier.
The code here would need some change anyway given planned change in
SPI_modifytuple semantics, since this executes after we've exited the
SPI environment. But really it's better to just use heap_modify_tuple.
While at it, normalize use of SPI_fnumber: make error messages distinguish
no-such-column from can't-set-system-column, and remove test for deleted
column which is going to migrate into SPI_fnumber. The lack of a check
for system column names is actually a pre-existing bug here, and might
even qualify as a security bug except that we don't have any trusted
version of plpython.
The code here would need some change anyway given planned change in
SPI_modifytuple semantics, since this executes after we've exited the
SPI environment. But really it's better to just use heap_modify_tuple.
The code's actually shorter this way, and this avoids depending on some
rather indirect reasoning about why the temporary arrays can't be overrun.
(I think the old code is safe, as long as Perl hashes can't contain
duplicate keys; but with this way we don't need that assumption, only
the assumption that SPI_fnumber doesn't return an out-of-range attnum.)
While at it, normalize use of SPI_fnumber: make error messages distinguish
no-such-column from can't-set-system-column, and remove test for deleted
column which is going to migrate into SPI_fnumber.
When squeezing a bucket during vacuum, it's not necessary to retain
any tuples already marked as dead, so ignore them when deciding which
tuples must be moved in order to empty a bucket page. Similarly, when
splitting a bucket, relocating dead tuples to the new bucket is a
waste of effort; instead, just ignore them.
Amit Kapila, reviewed by me. Testing help provided by Ashutosh
Sharma.
In each case, absence of a trailing newline would itself constitute a
PostgreSQL bug. Therefore, this slightly enhances the changed tests.
This works around a bug that last appeared in Perl 5.8.8, fixing
src/test/modules/test_pg_dump when run against that version. Commit
e7293e3271 worked around the bug, but the
subsequent addition of test_pg_dump introduced affected code. As that
commit had shown, slight increases in pattern complexity can suppress
the bug. This commit edits qr/foo$/m patterns too complex to encounter
the bug today, for style consistency and robustness against unrelated
pattern changes. Back-patch to 9.6, where test_pg_dump was introduced.
As of this writing, a fresh MSYS installation includes an affected Perl
5.8.8. The Perl 5.8.8 in Red Hat Enterprise Linux 5.11 carries a patch
that renders it unaffected, but the Perl 5.8.5 of Red Hat Enterprise
Linux 4.4 is affected.
We really ought to make StdRdOptions and the other decoded forms of
reloptions self-identifying, but for the moment, assume that only plain
relations could possibly be user_catalog_tables. Fixes problem with bogus
"ON CONFLICT is not supported on table ... used as a catalog table" error
when target is a view with cascade option.
Discussion: <26681.1477940227@sss.pgh.pa.us>
This reverts commit c8ead2a397.
Seems there is no way to do this that doesn't cause MSVC to give
warnings, so let's just go back to the way we've been doing it.
Discussion: <11843.1478358206@sss.pgh.pa.us>
Use a macro to generate the in and out functions for pseudotypes that
reject all input and output, saving many lines of redundant code.
Parameterize the error messages to reduce translatable strings.
Use Tcl_ListObjGetElements instead of Tcl_SplitList. Aside from being
possibly more efficient in its own right, this means we are no longer
responsible for freeing a malloc'd result array, so we can get rid of
a PG_TRY/PG_CATCH block.
Use heap_form_tuple instead of SPI_modifytuple. We don't need the
extra generality of the latter, since we're always replacing all
columns. Nor do we need its memory-context-munging, since at this
point we're already out of the SPI environment.
Per comparison of this code to tuple-building code submitted by Jim Nasby.
I've abandoned the thought of merging the two cases into a single routine,
but we may as well make the older code simpler and faster where we can.
For a very long time, pltcl's spi_exec and spi_execp commands have had
a behavior of storing the current row number as an element of output
arrays, but this was never documented. Fix that.
For an equally long time, pltcl_trigger_handler had a behavior of silently
ignoring ".tupno" as an output column name, evidently so that the result
of spi_exec could be used directly as a trigger result tuple. Not sure
how useful that really is, but in any case it's bad that it would break
attempts to use ".tupno" as an actual column name. We can fix it by not
checking for ".tupno" until after we check for a column name match. This
comports with the effective behavior of spi_exec[p] that ".tupno" is only
magic when you don't have an actual column named that.
In passing, wordsmith the description of returning modified tuples from
a pltcl trigger.
Noted while working on Jim Nasby's patch to support composite results
from pltcl. The inability to return trigger tuples using ".tupno" as
a column name is a bug, so back-patch to all supported branches.
We must do this in case the expression evaluation results in calling
another plpgsql function (or, really, anything using SPI). I missed
the need for this when I converted exec_cast_value() from doing a
simple InputFunctionCall() to doing ExecEvalExpr() in commit 1345cc67b.
There is a SPI_push_conditional in InputFunctionCall(), so that there
was no bug before that.
Per bug #14414 from Marcos Castedo. Add a regression test based on his
example, which was that a plpgsql function in a domain check constraint
didn't work when assigning to a domain-type variable within plpgsql.
Report: <20161106010947.1387.66380@wrigleys.postgresql.org>
The workaround the IANA guys chose to get rid of the clang warning
we'd silenced in commit 23ed2ba81 turns out not to satisfy Coverity.
Go back to the previous solution, ie, remove the useless comparison
to SIZE_MAX. (In principle, there could be machines out there where
it's not useless because ptrdiff_t is wider than size_t. But the whole
thing is pretty academic anyway, as we could never approach this limit
for any sane estimate of the amount of data that zic will ever be asked
to work with.)
Also, s/lineno/lineno_t/g, because if we accept their decision to start
using "lineno" as a typedef, it is going to have very unpleasant
consequences in our next pgindent run. Noted that while fooling with
pltcl yesterday.
Don't ask Tcl_GetIndexFromObj to store an error message in the interpreter
in cases where the next argument isn't necessarily one of the options
we're asking it to check for. At best that is a waste of time, and at
worst it might cause an inappropriate error result to get left behind.
Be sure to check for valid syntax (ie, no command arguments) in
pltcl_SPI_lastoid.
Extracted from a larger and otherwise-unrelated patch.
Jim Nasby
Patch: <f2134651-14b3-efeb-f274-c69f3c084031@BlueTreble.com>
Commit 7a2fe9bd0 improved merge append so that replacement of a tuple
takes log(N) operations, not twice log(N). Since cost_merge_append knew
about that explicitly, we should adjust it. This probably makes little
difference in practice, but the obsolete comment is confusing.
Ideally this would have been put in in 9.3 with the underlying behavior
change; but I'm not going to back-patch it, since there's some small chance
of changing a plan choice that somebody's optimized for.
Thomas Munro
Discussion: <CAEepm=0WQBSvuYcMOUj4Ga4NXpu2J=ejZcE=e=eiTjTX-6_gDw@mail.gmail.com>
Second try at the change originally made in commit 8518583cd;
this time with contrib updates so that manual extern declarations
are also marked with PGDLLEXPORT. The release notes should point
this out as a significant source-code change for extension authors,
since they'll have to make similar additions to avoid trouble on Windows.
Laurenz Albe, doc change by me
Patch: <A737B7A37273E048B164557ADEF4A58B53962ED8@ntex2010a.host.magwien.gv.at>
Generally, WAL resource managers are only supposed to examine the
top 4 bits of a WAL record's xl_info; the rest are reserved for
the WAL mechanism itself. A few places were not consistent about
doing this with respect to XLOG_CHECKPOINT and XLOG_SWITCH records.
There's no bug currently, since no additional bits ever get set in
these specific record types, but that might not be true forever.
Let's follow the generic coding rule here too.
Michael Paquier
This is infrastructure for the complete SQL standard feature. No
support is included at this point for execution nodes or PLs. The
intent is to add that soon.
As this patch leaves things, standard syntax can create tuplestores
to contain old and/or new versions of rows affected by a statement.
References to these tuplestores are in the TriggerData structure.
C triggers can access the tuplestores directly, so they are usable,
but they cannot yet be referenced within a SQL statement.
LockBufferForCleanup() acquires a cleanup lock unconditionally, and
ConditionalLockBufferForCleanup() acquires a cleanup lock if it is
possible to do so without waiting; this patch adds a new API,
IsBufferCleanupOK(), which tests whether an exclusive lock already
held happens to be a cleanup lock. This is possible because a cleanup
lock simply means an exclusive lock plus the assurance any other pins
on the buffer are newer than our own pin. Therefore, just as the
existing functions decide that the exclusive lock that they've just
taken is a cleanup lock if they observe the pin count to be 1, this
new function allows us to observe that the pin count is 1 on a buffer
we've already locked.
This is useful in situations where a backend definitely wishes to
modify the buffer and also wishes to perform cleanup operations if
possible. The patch to eliminate heavyweight locking by hash indexes
uses this, and it may have other applications as well.
Amit Kapila, per a suggestion from me. Some comment adjustments by me
as well.
This patch absorbs some unreleased fixes for symlink manipulation bugs
introduced in tzcode 2016g. Ordinarily I'd wait around for a released
version, but in this case it seems like we could do with extra testing,
in particular checking whether it works in EDB's VMware build environment.
This corresponds to commit aec59156abbf8472ba201b6c7ca2592f9c10e077 in
https://github.com/eggert/tz.
Per a report from Sandeep Thakkar, building in an environment where hard
links are not supported in the timezone data installation directory failed,
because upstream code refactoring had broken the case of symlinking from an
existing symlink. Further experimentation also showed that the symlinks
were sometimes made incorrectly, with too many or too few "../"'s in the
symlink contents.
This should get back-patched, but first let's see what the buildfarm
makes of it. I'm not too sure about the new dependency on linkat(2).
Report: <CANFyU94_p6mqRQc2i26PFp5QAOQGB++AjGX=FO8LDpXw0GSTjw@mail.gmail.com>
Discussion: http://mm.icann.org/pipermail/tz/2016-November/024431.html
It's also possible to specify a separate port for each host.
Previously, we'd loop over every address returned by looking up the
host name; now, we'll try every address for every host name.
Patch by me. Victor Wagner wrote an earlier patch for this feature,
which I read, but I didn't use any of his code. Review by Mithun Cy.
The foreign-key-aware logic for estimation of join sizes (added in commit
100340e2d) blindly tried to apply the concept to rels that are actually
parents of inheritance trees. This is just plain wrong so far as the
referenced relation is concerned, since the inheritance scan may well
produce lots of rows that are not participating in the constraint. It's
wrong for the referencing relation too, for the same reason; although on
that end we could conceivably detect whether all members of the inheritance
tree have equivalent FK constraints pointing to the same referenced rel,
and then proceed more or less as we do now. But pending somebody writing
code to do that, we must disable this, because it's producing completely
silly estimates when there's an FK linking the heads of inheritance trees.
Per bug #14404 from Clinton Adams. Back-patch to 9.6 where the new
estimation logic came in.
Report: <20161028200412.15987.96482@wrigleys.postgresql.org>
While converting expressions in an upper-level plan node so that they
reference Vars and expressions provided by the input plan node(s),
don't convert plain Const items, even if there happens to be a matching
Const in the input. It's silly to do so because a Var is more expensive to
execute than a Const. Moreover, converting can fool ExecCheckPlanOutput's
check that an insert or update query inserts nulls into dropped columns,
leading to "query provides a value for a dropped column" errors during
INSERT or UPDATE on a table with a dropped column. We could solve this
by making that check more complicated, but I don't see the point; this fix
should save a marginal number of cycles, and it also makes for less messy
EXPLAIN output, as shown by the ensuing regression test result changes.
Per report from Pavel Hanák. I have not incorporated a test case based
on that example, as there doesn't seem to be a simple way of checking
this in isolation without making a bunch of assumptions about other
planner and SQL-function behavior.
Back-patch to 9.6. This setrefs.c behavior exists much further back,
but there is not currently reason to think that it causes problems
before 9.6.
Discussion: <83shraampf.fsf@is-it.eu>
This serves as implicit documentation and is handy if someone wants to
tweak things. The rules are not part of a normal build, like this
entire directory.
Commit 2bd9e412f9 added these in error.
They were part of an earlier design for that patch and survived in the
committed version only by inadvertency.
Julien Rouhaud
tsquery_rewrite() tries to find matches to subsets of AND/OR conditions;
for example, in the query 'a | b | c' the substitution subquery 'a | c'
should match and lead to replacement of the first and third items.
That's fine, but the matching algorithm apparently takes about O(2^N)
for an N-clause query (I say "apparently" because the code is also both
unintelligible and uncommented). We could probably do better than that
even without any extra assumptions --- but actually, we know that the
subclauses are sorted, indeed are depending on that elsewhere in this very
same function. So we can just scan the two lists a single time to detect
matches, as though we were doing a merge join.
Also do a re-flattening call (QTNTernary()) in tsquery_rewrite_query, just
to make sure that the tree fits the expectations of the next search cycle.
I didn't try to devise a test case for this, but I'm pretty sure that the
oversight could have led to failure to match in some cases where a match
would be expected.
Improve comments, and also stick a CHECK_FOR_INTERRUPTS into
dofindsubquery, just in case it's still too slow for somebody.
Per report from Andreas Seltenreich. Back-patch to all supported branches.
Discussion: <8760oasf2y.fsf@credativ.de>
QTNTernary() contains logic to flatten, eg, '(a & b) & c' into 'a & b & c',
which is all well and good, but it tries to do that to NOT nodes as well,
so that '!!a' gets changed to '!a'. Explicitly restrict the conversion to
be done only on AND and OR nodes, and add a test case illustrating the bug.
In passing, provide some comments for the sadly naked functions in
tsquery_util.c, and simplify some baroque logic in QTNFree(), which
I think may have been leaking some items it intended to free.
Noted while investigating a complaint from Andreas Seltenreich.
Back-patch to all supported versions.
In the previous coding, if an aggregate's transition function returned an
expanded array, nodeAgg.c and nodeWindowAgg.c would always copy it and thus
force it into the flat representation. This led to ping-ponging between
flat and expanded formats, which costs a lot. For an aggregate using
array_append as transition function, I measured about a 15X slowdown
compared to the pre-9.5 code, when working on simple int[] arrays.
Of course, the old code was already O(N^2) in this usage due to copying
flat arrays all the time, but it wasn't quite this inefficient.
To fix, teach nodeAgg.c and nodeWindowAgg.c to allow expanded transition
values without copying, so long as the transition function takes care to
return the transition value already properly parented under the aggcontext.
That puts a bit of extra responsibility on the transition function, but
doing it this way allows us to not need any extra logic in the fast path
of advance_transition_function (ie, with a pass-by-value transition value,
or with a modified-in-place pass-by-reference value). We already know
that that's a hot spot so I'm loath to add any cycles at all there. Also,
while only array_append currently knows how to follow this convention,
this solution allows other transition functions to opt-in without needing
to have a whitelist in the core aggregation code.
(The reason we would need a whitelist is that currently, if you pass a
R/W expanded-object pointer to an arbitrary function, it's allowed to do
anything with it including deleting it; that breaks the core agg code's
assumption that it should free discarded values. Returning a value under
aggcontext is the transition function's signal that it knows it is an
aggregate transition function and will play nice. Possibly the API rules
for expanded objects should be refined, but that would not be a
back-patchable change.)
With this fix, an aggregate using array_append is no longer O(N^2), so it's
much faster than pre-9.5 code rather than much slower. It's still a bit
slower than the bespoke infrastructure for array_agg, but the differential
seems to be only about 10%-20% rather than orders of magnitude.
Discussion: <6315.1477677885@sss.pgh.pa.us>
The error message when we couldn't determine the encoding from a locale
said to report a bug about that. That might have been appropriate when
this code was first added, but by now this works pretty solidly and any
encodings we don't recognize we probably just don't support. We still
print the warning, but no longer invite the bug report.
This causes the supplied function name to appear in any error message,
making the error message friendlier and relieving us from having to
provide our own in some cases.
This bug exists as far back as 9.0, when Hot Standby was introduced,
so back-patch to all supported branches.
Report and patch by Takayuki Tsunakawa, reviewed by Michael Paquier
and Kuntal Ghosh.
If a restartpoint flushed no dirty buffers, it could fail to update
the minimum recovery point, leading to a minimum recovery point prior
to the starting REDO location. perform_base_backup() would interpret
that as meaning that no WAL files at all needed to be included in the
backup, failing an internal sanity check. To fix, have restartpoints
always update the minimum recovery point to just after the checkpoint
record itself, so that the file (or files) containing the checkpoint
record will always be included in the backup.
Code by Amit Kapila, per a design suggestion by me, with some
additional work on the code comment by me. Test case by Michael
Paquier. Report by Kyotaro Horiguchi.
The code to change the deferrability properties of a foreign-key constraint
updated all the associated triggers to match; but a moment's examination of
the code that creates those triggers in the first place shows that only
some of them should track the constraint's deferrability properties. This
leads to odd failures in subsequent exercise of the foreign key, as the
triggers are fired at the wrong times. Fix that, and add a regression test
comparing the trigger properties produced by ALTER CONSTRAINT with those
you get by creating the constraint as-intended to begin with.
Per report from James Parks. Back-patch to 9.4 where this ALTER
functionality was introduced.
Report: <CAJ3Xv+jzJ8iNNUcp4RKW8b6Qp1xVAxHwSXVpjBNygjKxcVuE9w@mail.gmail.com>
I broke this in commit f3094920a. Apparently it's dead code anyway,
at least as far as our buildfarm is concerned (and the upstream IANA
code doesn't worry at all about symlink() not being present).
But as long as the rest of our code is willing to guard against not
having symlink(), this should too. Noted while investigating a
tangentially-related complaint from Sandeep Thakkar.
Back-patch to keep branches in sync.
Turns out that the output format of Python Decimal isn't totally platform-
independent either. There are other tests for multi-dimensional arrays,
so rather than try to fix this test case, just remove it.
Per buildfarm member prairiedog.
Instead of treating all python sequence types as array dimensions, except
for tuples and various kinds of strings, only treat Python lists as
dimensions. The PyBytes_Check() function used previously is only available
on Python 2.6 and newer, and it was a bit fiddly anyway. The list of
exceptions would require adjustment if Python got a new kind of a sequence
similar to bytes/unicodes/strings, so only checking for Lists seems more
future-proof. The documentation only mentioned using Lists, so this is
closer to what was documented, anyway.
This should fix the buildfarm failures on systems building with Python 2.5,
although I don't have Python 2.5 installed myself to test with.
The number of decimals printed for floats varied in this test case, as
noted by several buildfarm members. There's nothing special about floats
and arrays in the code being tested, so replace the floats with numerics to
make the output platform-independent.
That used to be accepted, so let's try to give a hint to users on why
their PL/python functions no longer work.
Reviewed by Pavel Stehule.
Discussion: <CAH38_tmbqwaUyKs9yagyRra=SMaT45FPBxk1pmTYcM0TyXGG7Q@mail.gmail.com>
Multi-dimensional arrays can now be used as arguments to a PL/python function
(used to throw an error), and they can be returned as nested Python lists.
This makes a backwards-incompatible change to the handling of composite
types in arrays. Previously, you could return an array of composite types
as "[[col1, col2], [col1, col2]]", but now that is interpreted as a two-
dimensional array. Composite types in arrays must now be returned as
Python tuples, not lists, to resolve the ambiguity. I.e. "[(col1, col2),
(col1, col2)]".
To avoid breaking backwards-compatibility, when not necessary, () is still
accepted for arrays at the top-level, but it is always treated as a
single-dimensional array. Likewise, [] is still accepted for composite types,
when they are not in an array. Update the documentation to recommend using []
for arrays, and () for composite types, with a mention that those other things
are also accepted in some contexts.
This needs to be mentioned in the release notes.
Alexey Grishchenko, Dave Cramer and me. Reviewed by Pavel Stehule.
Discussion: <CAH38_tmbqwaUyKs9yagyRra=SMaT45FPBxk1pmTYcM0TyXGG7Q@mail.gmail.com>
The ArchiveHandle structure contained the archive format version number
twice, once as a single field and once split into components. Simplify
that by just keeping the single field and adding some macros to extract
the components. Introduce some macros for composing version numbers, to
eliminate the repeated use of magic formulas. Drop the unused trailing
zero byte from the run-time composite version representation.
reviewed by Tom Lane
An oversight in setting the boundaries of known commit timestamps during
startup caused old commit timestamps to become inaccessible after a
server restart.
Author and reporter: Julien Rouhaud
Review, test code: Craig Ringer
INSERT ... ON CONFLICT (specifically ExecCheckHeapTupleVisible) contains
another example of this unsafe coding practice. It is much harder to get
a failure out of it than the case fixed in commit 6292c2339, because in
most scenarios any hint bits that could be set would have already been set
earlier in the command. However, Konstantin Knizhnik reported a failure
with a custom transaction manager, and it's clearly possible to get a
failure via a race condition in async-commit mode.
For lack of a reproducible example, no regression test case in this
commit.
I did some testing with Asserts added to tqual.c's functions, and can say
that running "make check-world" exposed these two bugs and no others.
The Asserts are messy enough that I've not added them to the code for now.
Report: <57EE93C8.8080504@postgrespro.ru>
Related-Discussion: <CAO3NbwOycQjt2Oqy2VW-eLTq2M5uGMyHnGm=RNga4mjqcYD7gQ@mail.gmail.com>
A transaction that conflicts against itself, for example
INSERT INTO t(pk) VALUES (1),(1) ON CONFLICT DO NOTHING;
should behave the same regardless of isolation level. It certainly
shouldn't throw a serialization error, as retrying will not help.
We got this wrong due to the ON CONFLICT logic not considering the case,
as reported by Jason Dusek.
Core of this patch is by Peter Geoghegan (based on an earlier patch by
Thomas Munro), though I didn't take his proposed code refactoring for fear
that it might have unexpected side-effects. Test cases by Thomas Munro
and myself.
Report: <CAO3NbwOycQjt2Oqy2VW-eLTq2M5uGMyHnGm=RNga4mjqcYD7gQ@mail.gmail.com>
Related-Discussion: <57EE93C8.8080504@postgrespro.ru>
Despite the argumentation I wrote in commit 7a2fe85b0, it's unsafe to do
this, because in corner cases it's possible for HeapTupleSatisfiesSelf
to try to set hint bits on the target tuple; and at least since 8.2 we
have required the buffer content lock to be held while setting hint bits.
The added regression test exercises one such corner case. Unpatched, it
causes an assertion failure in assert-enabled builds, or otherwise would
cause a hint bit change in a buffer we don't hold lock on, which given
the right race condition could result in checksum failures or other data
consistency problems. The odds of a problem in the field are probably
pretty small, but nonetheless back-patch to all supported branches.
Report: <19391.1477244876@sss.pgh.pa.us>
Using the name fsync clashed with the #define we have on Windows that
redefines it to _commit. Naming it sync should remove that conflict.
Per all the Windows buildfarm members
Alvaro Herrera
Peter Eisentraut
Magnus Hagander
Fujii Masao
Tom Lane
Robert Haas
Stephen Frost
Bruce Momjian
Simon Riggs
Andres Freund
Heikki Linnakangas
Michael Meskes
Dean Rasheed
Noah Misch
Kevin Grittner