This is like shared_preload_libraries except that it takes effect at
backend start and can be changed without a full postmaster restart. It
is like local_preload_libraries except that it is still only settable by
a superuser. This can be a better way to load modules such as
auto_explain.
Since there are now three preload parameters, regroup the documentation
a bit. Put all parameters into one section, explain common
functionality only once, update the descriptions to reflect current and
future realities.
Reviewed-by: Dimitri Fontaine <dimitri@2ndQuadrant.fr>
In 9.3, there's no particular limit on the number of bgworkers;
instead, we just count up the number that are actually registered,
and use that to set MaxBackends. However, that approach causes
problems for Hot Standby, which needs both MaxBackends and the
size of the lock table to be the same on the standby as on the
master, yet it may not be desirable to run the same bgworkers in
both places. 9.3 handles that by failing to notice the problem,
which will probably work fine in nearly all cases anyway, but is
not theoretically sound.
A further problem with simply counting the number of registered
workers is that new workers can't be registered without a
postmaster restart. This is inconvenient for administrators,
since bouncing the postmaster causes an interruption of service.
Moreover, there are a number of applications for background
processes where, by necessity, the background process must be
started on the fly (e.g. parallel query). While this patch
doesn't actually make it possible to register new background
workers after startup time, it's a necessary prerequisite.
Patch by me. Review by Michael Paquier.
Make it easier for readers of the FP docs to find out about possibly
truncated values.
Per complaint from Tom Duffey in message
F0E0F874-C86F-48D1-AA2A-0C5365BF5118@trillitech.com
Author: Albe Laurenz
Reviewed by: Abhijit Menon-Sen
Restore 4-byte designation for docs. Fix 9.3 doc query to properly pad
to four digits.
Backpatch to all active branches
Per suggestions from Ian Lawrence Barwick
Doing that results in a broken index entry in PDF output. We had only
a few like that, which is probably why nobody noticed before.
Standardize on putting the <term> first.
Josh Kupershmidt
Commit 13fe298ca0 changed this GUC to be
PGC_SUSET, but neglected to update the documentation to match.
While at it, edit and rearrange the text a little for clarity.
Checksums are set immediately prior to flush out of shared buffers
and checked when pages are read in again. Hint bit setting will
require full page write when block is dirtied, which causes various
infrastructure changes. Extensive comments, docs and README.
WARNING message thrown if checksum fails on non-all zeroes page;
ERROR thrown but can be disabled with ignore_checksum_failure = on.
Feature enabled by an initdb option, since transition from option off
to option on is long and complex and has not yet been implemented.
Default is not to use checksums.
Checksum used is WAL CRC-32 truncated to 16-bits.
Simon Riggs, Jeff Davis, Greg Smith
Wide input and assistance from many community members. Thank you.
This GUC allows limiting the time spent waiting to acquire any one
heavyweight lock.
In support of this, improve the recently-added timeout infrastructure
to permit efficiently enabling or disabling multiple timeouts at once.
That reduces the performance hit from turning on lock_timeout, though
it's still not zero.
Zoltán Böszörményi, reviewed by Tom Lane,
Stephen Frost, and Hari Babu
Clarify the docs explaining what commit_delay does, and add a
recommendation about a useful value for it, namely half of the single-page
fsync time reported by pg_test_fsync. This is informed by testing of
the new-in-9.3 implementation of commit_delay; in prior versions it
was far harder to arrive at a useful setting.
In passing, do some wordsmithing and markup-fixing in the same general
area.
Also, change pg_test_fsync's default time-per-test from 2 seconds to 5.
The old value was about the minimum at which the results could be taken
seriously at all, and so seems a tad optimistic as a default.
Peter Geoghegan, reviewed by Noah Misch; some additional editing by me
storage.
Have pg_upgrade use it, and enable server options fsync=off and
full_page_writes=off.
Document that users turning fsync from off to on should run initdb
--sync-only.
[ Previous commit was incorrectly applied as a git merge. ]
Rename replication_timeout to wal_sender_timeout, and add a new setting
called wal_receiver_timeout that does the same at the walreceiver side.
There was previously no timeout in walreceiver, so if the network went down,
for example, the walreceiver could take a long time to notice that the
connection was lost. Now with the two settings, both sides of a replication
connection will detect a broken connection similarly.
It is no longer necessary to manually set wal_receiver_status_interval to
a value smaller than the timeout. Both wal sender and receiver now
automatically send a "ping" message if more than 1/2 of the configured
timeout has elapsed, and it hasn't received any messages from the other end.
Amit Kapila, heavily edited by me.
Copy-editing for previous patch, plus fixing some longstanding markup
issues and oversights (like not mentioning that failures will set the
PQerrorMessage string).
This allows easily splitting configuration into many files, deployed in a
directory.
Magnus Hagander, Greg Smith, Selena Deckelmann, reviewed by Noah Misch.
Somewhere along the line, somebody decided to remove all trace of this
notation from the documentation text. It was still in the command syntax
synopses, or at least some of them, but with no indication what it meant.
This will not do, as evidenced by the confusion apparent in bug #7543;
even if the notation is now unnecessary, people will find it in legacy
SQL code and need to know what it does.
The docs claimed that this mode only waits for the standby to receive WAL
data, but actually it waits for the data to be written out to the standby's
OS; which is a pretty significant difference because it removes the risk of
crash of the walreceiver process.
Replace unix_socket_directory with unix_socket_directories, which is a list
of socket directories, and adjust postmaster's code to allow zero or more
Unix-domain sockets to be created.
This is mostly a straightforward change, but since the Unix sockets ought
to be created after the TCP/IP sockets for safety reasons (better chance
of detecting a port number conflict), AddToDataDirLockFile needs to be
fixed to support out-of-order updates of data directory lockfile lines.
That's a change that had been foreseen to be necessary someday anyway.
Honza Horak, reviewed and revised by Tom Lane
Should be limited to the maximum number of connections excluding
autovacuum workers, not including.
Add similar check for max_wal_senders, which should never be higher than
max_connections.
Instead of letting every backend participating in a group commit wait
independently, have the first one that becomes ready to flush WAL wait
for the configured delay, and let all the others wait just long enough
for that first process to complete its flush. This greatly increases
the chances of being able to configure a commit_delay setting that
actually improves performance.
As a side consequence of this change, commit_delay now affects all WAL
flushes, rather than just commits. There was some discussion on
pgsql-hackers about whether to rename the GUC to, say, wal_flush_delay,
but in the absence of consensus I am leaving it alone for now.
Peter Geoghegan, with some changes, mostly to the documentation, by me.
Rewrite description of "include_if_exists" for clarity. Add subsection
headings to make the structure of the page a little clearer. A couple
other minor improvements too.
Josh Kupershmidt and Tom Lane
Previously we attempted to throw an error or at least warning for missing
schemas, but this was done inconsistently because of implementation
restrictions (in many cases, GUC settings are applied outside transactions
so that we can't do system catalog lookups). Furthermore, there were
exceptions to the rule even in the beginning, and we'd been poking more
and more holes in it as time went on, because it turns out that there are
lots of use-cases for having some irrelevant items in a common search_path
value. It seems better to just adopt a philosophy similar to what's always
been done with Unix PATH settings, wherein nonexistent or unreadable
directories are silently ignored.
This commit also fixes the documentation to point out that schemas for
which the user lacks USAGE privilege are silently ignored. That's always
been true but was previously not documented.
This is mostly in response to Robert Haas' complaint that 9.1 started to
throw errors or warnings for missing schemas in cases where prior releases
had not. We won't adopt such a significant behavioral change in a back
branch, so something different will be needed in 9.1.
It's still non-deterministic in some sense ... but given fixed settings
and identical planning problems, it will now always choose the same plan,
so we probably shouldn't tar it with that brush. Per bug #6565 from
Guillaume Cottenceau. Back-patch to 9.0 where the behavior was fixed.
Ants Aasma's original patch to add timing information for buffer I/O
requests exposed this data at the relation level, which was judged too
costly. I've here exposed it at the database level instead.
Currently, the only way to see the numbers this gathers is via
EXPLAIN (ANALYZE, BUFFERS), but the plan is to add visibility through
the stats collector and pg_stat_statements in subsequent patches.
Ants Aasma, reviewed by Greg Smith, with some further changes by me.
In backup.sgml, point out that you need to be using the logging collector
if you want to log messages from a failing archive_command script. (This
is an oversimplification, in that it will work without the collector as
long as you're not sending postmaster stderr to /dev/null; but it seems
like a good idea to encourage use of the collector to avoid problems
with multiple processes concurrently scribbling on one file.)
In config.sgml, do some wordsmithing of logging_collector discussion.
Per bug #6518 from Janning Vygen
This allows changing the location of the files that were previously
hard-coded to server.crt, server.key, root.crt, root.crl.
server.crt and server.key continue to be the default settings and are
thus required to be present by default if SSL is enabled. But the
settings for the server-side CA and CRL are now empty by default, and
if they are set, the files are required to be present. This replaces
the previous behavior of ignoring the functionality if the files were
not found.
Replication occurs only to memory on standby, not to disk,
so provides additional performance if user wishes to
reduce durability level slightly. Adds concept of multiple
independent sync rep queues.
Fujii Masao and Simon Riggs
This works the same as include, except that an error is not thrown
if the file is missing. Instead the fact that it's missing is
logged.
Greg Smith, reviewed by Euler Taveira de Oliveira.
This reverts commit 0180bd6180.
contrib/userlock is gone, but user-level locking still exists,
and is exposed via the pg_advisory* family of functions.
This allows different instances to use the eventlog with different
identifiers, by setting the event_source GUC, similar to how
syslog_ident works.
Original patch by MauMau, heavily modified by Magnus Hagander
When a btree index contains all columns required by the query, and the
visibility map shows that all tuples on a target heap page are
visible-to-all, we don't need to fetch that heap page. This patch depends
on the previous patches that made the visibility map reliable.
There's a fair amount left to do here, notably trying to figure out a less
chintzy way of estimating the cost of an index-only scan, but the core
functionality seems ready to commit.
Robert Haas and Ibrar Ahmed, with some previous work by Heikki Linnakangas.
This variable provides only marginal error-prevention capability (since
it can only check the prefix of a qualified GUC name), and the consensus
is that that isn't worth the amount of hassle that maintaining the setting
creates for DBAs. So, let's just remove it.
With this commit, the system will silently accept a value for any qualified
GUC name at all, whether it has anything to do with any known extension or
not. (Unqualified names still have to match known built-in settings,
though; and you will get a WARNING at extension load time if there's an
unrecognized setting with that extension's prefix.)
There's still some discussion ongoing about whether to tighten that up and
if so how; but if we do come up with a solution, it's not likely to look
anything like custom_variable_classes.
This patch has two distinct purposes: to report multiple problems in
postgresql.conf rather than always bailing out after the first one,
and to change the policy for whether changes are applied when there are
unrelated errors in postgresql.conf.
Formerly the policy was to apply no changes if any errors could be
detected, but that had a significant consistency problem, because in some
cases specific values might be seen as valid by some processes but invalid
by others. This meant that the latter processes would fail to adopt
changes in other parameters even though the former processes had done so.
The new policy is that during SIGHUP, the file is rejected as a whole
if there are any errors in the "name = value" syntax, or if any lines
attempt to set nonexistent built-in parameters, or if any lines attempt
to set custom parameters whose prefix is not listed in (the new value of)
custom_variable_classes. These tests should always give the same results
in all processes, and provide what seems a reasonably robust defense
against loading values from badly corrupted config files. If these tests
pass, all processes will apply all settings that they individually see as
good, ignoring (but logging) any they don't.
In addition, the postmaster does not abandon reading a configuration file
after the first syntax error, but continues to read the file and report
syntax errors (up to a maximum of 100 syntax errors per file).
The postmaster will still refuse to start up if the configuration file
contains any errors at startup time, but these changes allow multiple
errors to be detected and reported before quitting.
Alexey Klyukin, reviewed by Andy Colson and av (Alexander ?)
with some additional hacking by Tom Lane
I've made a significant effort at filling in the "Using EXPLAIN" section
to be reasonably complete about mentioning everything that EXPLAIN can
output, including the "Rows Removed" outputs that were added by Marko
Tiikkaja's recent documentation-free patch. I also updated the examples to
be consistent with current behavior; several of them were not close to what
the current code will do. No doubt there's more that can be done here, but
I'm out of patience for today.
We were doing some amazingly complicated things in order to avoid running
the very expensive identify_system_timezone() procedure during GUC
initialization. But there is an obvious fix for that, which is to do it
once during initdb and have initdb install the system-specific default into
postgresql.conf, as it already does for most other GUC variables that need
system-environment-dependent defaults. This means that the timezone (and
log_timezone) settings no longer have any magic behavior in the server.
Per discussion.
The latch infrastructure is now capable of detecting all cases where the
walsender loop needs to wake up, so there is no reason to have an arbitrary
timeout.
Also, modify the walsender loop logic to follow the standard pattern of
ResetLatch, test for work to do, WaitLatch. The previous coding was both
hard to follow and buggy: it would sometimes busy-loop despite having
nothing available to do, eg between receipt of a signal and the next time
it was caught up with new WAL, and it also had interesting choices like
deciding to update to WALSNDSTATE_STREAMING on the strength of information
known to be obsolete.
Somebody added a cross-reference to shared_preload_libraries, but wrote the
wrong variable name when they did it (and didn't bother to make it a link
either).
Spotted by Christoph Anton Mitterer.
Standby servers can now have WALSender processes, which can work with
either WALReceiver or archive_commands to pass data. Fully updated
docs, including new conceptual terms of sending server, upstream and
downstream servers. WALSenders terminated when promote to master.
Fujii Masao, review, rework and doc rewrite by Simon Riggs
Per discussion, this structure seems more understandable than what was
there before. Make config.sgml and postgresql.conf.sample agree.
In passing do a bit of editorial work on the variable descriptions.
postmaster.log", or nohup.
There was a small issue with LINUX_OOM_ADJ and silent_mode, namely that with
silent_mode the postmaster process incorrectly used the OOM settings meant
for backend processes. We certainly could've fixed that directly, but since
silent_mode was redundant anyway, we might as well just remove it.
This allows deadlock_timeout to be reduced for transactions that are
particularly likely to be involved in a deadlock, thus detecting it
more quickly. It is also potentially useful as a poor-man's deadlock
priority mechanism: a transaction with a high deadlock_timeout is less
likely to be chosen as the victim than one with a low
deadlock_timeout. Since that could be used to game the system, we
make this PGC_SUSET rather than PGC_USERSET.
At some point, it might be worth thinking about a more explicit
priority mechanism, since using this is far from fool-proof. But
let's see whether there's enough use case to justify the additional
work before we go down that route.
Noah Misch, reviewed by Shigeru Hanada
This is more consistent with what we do elsewhere, and hopefully avoids
creating the perception that current_schemas takes no arguments.
As suggested by Brendan Jurd
The recent cleanup of GUC assign hooks got rid of the kludge of using
"unknown" as a magic value for timezone and log_timezone. But I forgot
to update the documentation to match, as noted by Martin Pitt.
Also remove the material about this being an alpha release.
The notes still need a lot of work, but they're more or less presentable
as a beta version now.
This means one less thing to configure when setting up synchronous
replication, and also avoids some ambiguity around what the behavior
should be when the settings of these variables conflict.
Fujii Masao, with additional hacking by me.