We used to set it to the current recovery target timeline, but the recovery
target timeline can change during recovery, leaving ThisTimeLineID at an
old value. That seems worse than always leaving it at zero to begin with.
AFAICS there was no good reason to set it in the first place. ThisTimeLineID
is not needed in checkpointer or bgwriter process, until it's time to write
the end-of-recovery checkpoint, and at that point ThisTimeLineID is updated
anyway.
If you restored from a backup taken from a standby, and the last record in
the backup is the checkpoint record, ie. there is no redo required except
for the checkpoint record, we would fail to notice that we've reached the
end-of-backup point, and the database is consistent. The result was an
error "WAL ends before end of online backup". To fix, move the
have-we-reached-end-of-backup check into CheckRecoveryConsistency(), which
is already responsible for similar checks with minRecoveryPoint, and is
called in the right places.
Backpatch to 9.2, this check and bug did not exist before that.
Before this patch, streaming replication would refuse to start replicating
if the timeline in the primary doesn't exactly match the standby. The
situation where it doesn't match is when you have a master, and two
standbys, and you promote one of the standbys to become new master.
Promoting bumps up the timeline ID, and after that bump, the other standby
would refuse to continue.
There's significantly more timeline related logic in streaming replication
now. First of all, when a standby connects to primary, it will ask the
primary for any timeline history files that are missing from the standby.
The missing files are sent using a new replication command TIMELINE_HISTORY,
and stored in standby's pg_xlog directory. Using the timeline history files,
the standby can follow the latest timeline present in the primary
(recovery_target_timeline='latest'), just as it can follow new timelines
appearing in an archive directory.
START_REPLICATION now takes a TIMELINE parameter, to specify exactly which
timeline to stream WAL from. This allows the standby to request the primary
to send over WAL that precedes the promotion. The replication protocol is
changed slightly (in a backwards-compatible way although there's little hope
of streaming replication working across major versions anyway), to allow
replication to stop when the end of timeline reached, putting the walsender
back into accepting a replication command.
Many thanks to Amit Kapila for testing and reviewing various versions of
this patch.
If a tuple is larger than page size minus space reserved for fillfactor,
heap_multi_insert would never find a page that it fits in and repeatedly ask
for a new page from RelationGetBufferForTuple. If a tuple is too large to
fit on any page, taking fillfactor into account, RelationGetBufferForTuple
will always expand the relation. In a normal insert, heap_insert will accept
that and put the tuple on the new page. heap_multi_insert, however, does a
fillfactor check of its own, and doesn't accept the newly-extended page
RelationGetBufferForTuple returns, even though there is no other choice to
make the tuple fit.
Fix that by making the logic in heap_multi_insert more like the heap_insert
logic. The first tuple is always put on the page RelationGetBufferForTuple
gives us, and the fillfactor check is only applied to the subsequent tuples.
Report from David Gould, although I didn't use his patch.
EndRecPtr is the last record that we've read, but not necessarily yet
replayed. CheckRecoveryConsistency should compare minRecoveryPoint with the
last replayed record instead. This caused recovery to think it's reached
consistency too early.
Now that we do the check in CheckRecoveryConsistency correctly, we have to
move the call of that function to after redoing a record. The current place,
after reading a record but before replaying it, is wrong. In particular, if
there are no more records after the one ending at minRecoveryPoint, we don't
enter hot standby until one extra record is generated and read by the
standby, and CheckRecoveryConsistency is called. These two bugs conspired
to make the code appear to work correctly, except for the small window
between reading the last record that reaches minRecoveryPoint, and
replaying it.
In the passing, rename recoveryLastRecPtr, which is the last record
replayed, to lastReplayedEndRecPtr. This makes it slightly less confusing
with replayEndRecPtr, which is the last record read that we're about to
replay.
Original report from Kyotaro HORIGUCHI, further diagnosis by Fujii Masao.
Backpatch to 9.0, where Hot Standby subtly changed the test from
"minRecoveryPoint < EndRecPtr" to "minRecoveryPoint <= EndRecPtr". The
former works because where the test is performed, we have always read one
more record than we've replayed.
If a file is truncated, we must update minRecoveryPoint. Once a file is
truncated, there's no going back; it would not be safe to stop recovery
at a point earlier than that anymore.
Per report from Kyotaro HORIGUCHI. Backpatch to 8.4. Before that,
minRecoveryPoint was not updated during recovery at all.
Forgot to update it at the right place. Also, consider checkpoint record
that switches to new timelne to be on the new timeline.
This fixes erroneous "requested timeline 2 does not contain minimum recovery
point" errors, pointed out by Amit Kapila while testing another patch.
If we're not in hot standby mode, then there's no way for users to connect
to reset the recoveryPause flag, so we shouldn't pause. The code was aware
of this but the test to see if pausing was safe was seriously inadequate:
it wasn't paying attention to reachedConsistency, and besides what it was
testing was that we could legally enter hot standby, not that we have
done so. Get rid of that in favor of checking LocalHotStandbyActive,
which because of the coding in CheckRecoveryConsistency is tantamount to
checking that we have told the postmaster to enter hot standby.
Also, move the recoveryPausesHere() call that reacts to asynchronous
recoveryPause requests so that it's not in the middle of application of a
WAL record. I put it next to the recoveryStopsHere() call --- in future
those are going to need to interact significantly, so this seems like a
good waystation.
Also, don't bother trying to read another WAL record if we've already
decided not to continue recovery. This was no big deal when the code was
written originally, but now that reading a record might entail actions like
fetching an archive file, it seems a bit silly to do it like that.
Per report from Jeff Janes and subsequent discussion. The pause feature
needs quite a lot more work, but this gets rid of some indisputable bugs,
and seems safe enough to back-patch.
When waiting for an XLOG_BACKUP_RECORD the minRecoveryPoint
will be incorrect, so we must not declare recovery as consistent
before we have seen the record. Major bug allowing recovery to end
too early in some cases, allowing people to see inconsistent db.
This patch to HEAD and 9.2, other fix required for 9.1 and 9.0
Simon Riggs and Andres Freund, bug report by Jeff Janes
This allows us to do some more rigorous sanity checking for various
incorrect point-in-time recovery scenarios, and provides more information
for debugging purposes. It will also come handy in the upcoming patch to
allow timeline switches to be replicated by streaming replication.
This allows recovery to notice certain incorrect recovery scenarios.
If a server has recovered to point X on timeline 5, and you restart
recovery, it better be on timeline 5 when it reaches point X again, not on
some timeline with a higher ID. This can happen e.g if you a standby server
is shut down, a new timeline appears in the WAL archive, and the standby
server is restarted. It will try to follow the new timeline, which is wrong
because some WAL on the old timeline was already replayed before shutdown.
Requires an initdb (or at least pg_resetxlog), because this adds a field to
the control file.
Rename PGXACT->inCommit flag into delayChkpt flag,
and generalise comments to allow use in other situations,
such as the forthcoming potential use in checksum patch.
Replace wait loop to look for VXIDs with delayChkpt set.
No user visible changes, not behaviour changes at present.
Simon Riggs, reviewed and rebased by Jeff Davis
Update README to explain prerequisites for
correct access to LSN fields of a page.
Independent chunk removed from checksums
patch to reduce size of patch.
Allow support only for freezing tuples by explicit
command. Previous coding mistakenly extended
slightly beyond what was agreed as correct on -hackers.
So essentially a partial revoke of earlier work,
leaving just the COPY FREEZE command.
This reverts commit c11130690d in favor of
actually fixing the problem: namely, that we should never have been
modifying the checkpoint record's nextXid at this point to begin with.
The nextXid should match the state as of the checkpoint's logical WAL
position (ie the redo point), not the state as of its physical position.
It's especially bogus to advance it in some wal_levels and not others.
In any case there is no need for the checkpoint record to carry the
same nextXid shown in the XLOG_RUNNING_XACTS record just emitted by
LogStandbySnapshot, as any replay operation will already have adopted
that value as current.
This fixes bug #7710 from Tarvi Pillessaar, and probably also explains bug
#6291 from Daniel Farina, in that if a checkpoint were in progress at the
instant of XID wraparound, the epoch bump would be lost as reported.
(And, of course, these days there's at least a 50-50 chance of a checkpoint
being in progress at any given instant.)
Diagnosed by me and independently by Andres Freund. Back-patch to all
branches supporting hot standby.
Previously we stored all xids mixed together.
Now we store top-level xids first, followed
by all subxids. Also skip logging any subxids
if the snapshot is suboverflowed, since there
are potentially large numbers of them and they
are not useful in that case anyway. Has value
in the envisaged design for decoding of WAL.
No planned effect on Hot Standby.
Andres Freund, reviewed by me
If wal_level = hot_standby we update the checkpoint nextxid,
though in the case where a wraparound occurred half-way through
a checkpoint we would neglect updating the epoch also. Updating
the nextxid is arguably the wrong thing to do, but changing that
may introduce subtle bugs into hot standby startup, while updating
the value doesn't cause any known bugs yet. Minimal fix now to
HEAD and backbranches, wider fix later in HEAD.
Bug reported in #6291 by Daniel Farina and slightly differently in
Cause analysis and recommended fixes from Tom Lane and Andres Freund.
Applied patch is minimal version of Andres Freund's work.
When a relfilenode is created in this subtransaction or
a committed child transaction and it cannot otherwise
be seen by our own process, mark tuples committed ahead
of transaction commit for all COPY commands in same
transaction. If FREEZE specified on COPY
and pre-conditions met then rows will also be frozen.
Both options designed to avoid revisiting rows after commit,
increasing performance of subsequent commands after
data load and upgrade. pg_restore changes later.
Simon Riggs, review comments from Heikki Linnakangas, Noah Misch and design
input from Tom Lane, Robert Haas and Kevin Grittner
Commit 8cb53654db, which introduced DROP
INDEX CONCURRENTLY, managed to break CREATE INDEX CONCURRENTLY via a poor
choice of catalog state representation. The pg_index state for an index
that's reached the final pre-drop stage was the same as the state for an
index just created by CREATE INDEX CONCURRENTLY. This meant that the
(necessary) change to make RelationGetIndexList ignore about-to-die indexes
also made it ignore freshly-created indexes; which is catastrophic because
the latter do need to be considered in HOT-safety decisions. Failure to
do so leads to incorrect index entries and subsequently wrong results from
queries depending on the concurrently-created index.
To fix, add an additional boolean column "indislive" to pg_index, so that
the freshly-created and about-to-die states can be distinguished. (This
change obviously is only possible in HEAD. This patch will need to be
back-patched, but in 9.2 we'll use a kluge consisting of overloading the
formerly-impossible state of indisvalid = true and indisready = false.)
In addition, change CREATE/DROP INDEX CONCURRENTLY so that the pg_index
flag changes they make without exclusive lock on the index are made via
heap_inplace_update() rather than a normal transactional update. The
latter is not very safe because moving the pg_index tuple could result in
concurrent SnapshotNow scans finding it twice or not at all, thus possibly
resulting in index corruption. This is a pre-existing bug in CREATE INDEX
CONCURRENTLY, which was copied into the DROP code.
In addition, fix various places in the code that ought to check to make
sure that the indexes they are manipulating are valid and/or ready as
appropriate. These represent bugs that have existed since 8.2, since
a failed CREATE INDEX CONCURRENTLY could leave a corrupt or invalid
index behind, and we ought not try to do anything that might fail with
such an index.
Also fix RelationReloadIndexInfo to ensure it copies all the pg_index
columns that are allowed to change after initial creation. Previously we
could have been left with stale values of some fields in an index relcache
entry. It's not clear whether this actually had any user-visible
consequences, but it's at least a bug waiting to happen.
In addition, do some code and docs review for DROP INDEX CONCURRENTLY;
some cosmetic code cleanup but mostly addition and revision of comments.
This will need to be back-patched, but in a noticeably different form,
so I'm committing it to HEAD before working on the back-patch.
Problem reported by Amit Kapila, diagnosis by Pavan Deolassee,
fix by Tom Lane and Andres Freund.
This was apparently a typo, which caused recovery to think that it
immediately reached the end of backup, and allowed the database to start
up too early.
Reported by Jeff Janes. Backpatch to 9.2, where this code was introduced.
Files opened with BasicOpenFile or PathNameOpenFile are not automatically
cleaned up on error. That puts unnecessary burden on callers that only want
to keep the file open for a short time. There is AllocateFile, but that
returns a buffered FILE * stream, which in many cases is not the nicest API
to work with. So add function called OpenTransientFile, which returns a
unbuffered fd that's cleaned up like the FILE* returned by AllocateFile().
This plugs a few rare fd leaks in error cases:
1. copy_file() - fixed by by using OpenTransientFile instead of BasicOpenFile
2. XLogFileInit() - fixed by adding close() calls to the error cases. Can't
use OpenTransientFile here because the fd is supposed to persist over
transaction boundaries.
3. lo_import/lo_export - fixed by using OpenTransientFile instead of
PathNameOpenFile.
In addition to plugging those leaks, this replaces many BasicOpenFile() calls
with OpenTransientFile() that were not leaking, because the code meticulously
closed the file on error. That wasn't strictly necessary, but IMHO it's good
for robustness.
The same leaks exist in older versions, but given the rarity of the issues,
I'm not backpatching this. Not yet, anyway - it might be good to backpatch
later, after this mechanism has had some more testing in master branch.
When startup process opens a WAL segment after replaying part of it, it
validates the first page on the WAL segment, even though the page it's
really interested in later in the file. As part of the validation, it checks
that the TLI on the page header is >= the TLI it saw on the last page it
read. If the segment contains a timeline switch, and we have already
replayed it, and then re-open the WAL segment (because of streaming
replication got disconnected and reconnected, for example), the TLI check
will fail when the first page is validated. Fix that by relaxing the TLI
check when re-opening a WAL segment.
Backpatch to 9.0. Earlier versions had the same code, but before standby
mode was introduced in 9.0, recovery never tried to re-read a segment after
partially replaying it.
Reported by Amit Kapila, while testing a new feature.
When I moved ExecuteRecoveryCommand() from xlog.c to xlogarchive.c, I didn't
realize that it's called from the checkpoint process, not the startup
process. I tried to use InRedo variable to decide whether or not to attempt
cleaning up the archive (must not do so before we have read the initial
checkpoint record), but that variable is only valid within the startup
process.
Instead, let ExecuteRecoveryCommand() always clean up the archive, and add
an explicit argument to RestoreArchivedFile() to say whether that's allowed
or not. The caller knows better.
Reported by Erik Rijkers, diagnosis by Fujii Masao. Only 9.3devel is
affected.
At commit all standby locks are released
for the top-level transaction, so searching
for locks for each subtransaction is both
pointless and costly (N^2) in the presence
of many AccessExclusiveLocks.
Most of the replay functions for WAL record types that modify more than
one page failed to ensure that those pages were locked correctly to ensure
that concurrent queries could not see inconsistent page states. This is
a hangover from coding decisions made long before Hot Standby was added,
when it was hardly necessary to acquire buffer locks during WAL replay
at all, let alone hold them for carefully-chosen periods.
The key problem was that RestoreBkpBlocks was written to hold lock on each
page restored from a full-page image for only as long as it took to update
that page. This was guaranteed to break any WAL replay function in which
there was any update-ordering constraint between pages, because even if the
nominal order of the pages is the right one, any mixture of full-page and
non-full-page updates in the same record would result in out-of-order
updates. Moreover, it wouldn't work for situations where there's a
requirement to maintain lock on one page while updating another. Failure
to honor an update ordering constraint in this way is thought to be the
cause of bug #7648 from Daniel Farina: what seems to have happened there
is that a btree page being split was rewritten from a full-page image
before the new right sibling page was written, and because lock on the
original page was not maintained it was possible for hot standby queries to
try to traverse the page's right-link to the not-yet-existing sibling page.
To fix, get rid of RestoreBkpBlocks as such, and instead create a new
function RestoreBackupBlock that restores just one full-page image at a
time. This function can be invoked by WAL replay functions at the points
where they would otherwise perform non-full-page updates; in this way, the
physical order of page updates remains the same no matter which pages are
replaced by full-page images. We can then further adjust the logic in
individual replay functions if it is necessary to hold buffer locks
for overlapping periods. A side benefit is that we can simplify the
handling of concurrency conflict resolution by moving that code into the
record-type-specfic functions; there's no more need to contort the code
layout to keep conflict resolution in front of the RestoreBkpBlocks call.
In connection with that, standardize on zero-based numbering rather than
one-based numbering for referencing the full-page images. In HEAD, I
removed the macros XLR_BKP_BLOCK_1 through XLR_BKP_BLOCK_4. They are
still there in the header files in previous branches, but are no longer
used by the code.
In addition, fix some other bugs identified in the course of making these
changes:
spgRedoAddNode could fail to update the parent downlink at all, if the
parent tuple is in the same page as either the old or new split tuple and
we're not doing a full-page image: it would get fooled by the LSN having
been advanced already. This would result in permanent index corruption,
not just transient failure of concurrent queries.
Also, ginHeapTupleFastInsert's "merge lists" case failed to mark the old
tail page as a candidate for a full-page image; in the worst case this
could result in torn-page corruption.
heap_xlog_freeze() was inconsistent about using a cleanup lock or plain
exclusive lock: it did the former in the normal path but the latter for a
full-page image. A plain exclusive lock seems sufficient, so change to
that.
Also, remove gistRedoPageDeleteRecord(), which has been dead code since
VACUUM FULL was rewritten.
Back-patch to 9.0, where hot standby was introduced. Note however that 9.0
had a significantly different WAL-logging scheme for GIST index updates,
and it doesn't appear possible to make that scheme safe for concurrent hot
standby queries, because it can leave inconsistent states in the index even
between WAL records. Given the lack of complaints from the field, we won't
work too hard on fixing that branch.
errcontext() is typically used in an error context callback function, not
within an ereport() invocation like e.g errmsg and errdetail are. That means
that the message domain that the TEXTDOMAIN magic in ereport() determines
is not the right one for the errcontext() calls. The message domain needs to
be determined by the C file containing the errcontext() call, not the file
containing the ereport() call.
Fix by turning errcontext() into a macro that passes the TEXTDOMAIN to use
for the errcontext message. "errcontext" was used in a few places as a
variable or struct field name, I had to rename those out of the way, now
that errcontext is a macro.
We've had this problem all along, but this isn't doesn't seem worth
backporting. It's a fairly minor issue, and turning errcontext from a
function to a macro requires at least a recompile of any external code that
calls errcontext().
Commit dfda6eba (which changed segment numbers to use a single 64 bit
variable instead of log/seg) introduced a couple of bogus choices of
exactly which log segment number variable to use in each case.
This is currently pretty harmless; in one place, the bogus number was
only being used in an error message for a pretty unlikely condition
(failure to fsync a WAL segment file). In the other, it was using a
global variable instead of the local variable; but all callsites were
passing the value of the global variable anyway.
No need to backpatch because that commit is not on earlier branches.
This prevents surprising behavior when a FOR EACH ROW trigger
BEFORE UPDATE or BEFORE DELETE directly or indirectly updates or
deletes the the old row. Prior to this patch the requested action
on the row could be silently ignored while all triggered actions
based on the occurence of the requested action could be committed.
One example of how this could happen is if the BEFORE DELETE
trigger for a "parent" row deleted "children" which had trigger
functions to update summary or status data on the parent.
This also prevents similar surprising problems if the query has a
volatile function which updates a target row while it is already
being updated.
There are related issues present in FOR UPDATE cursors and READ
COMMITTED queries which are not handled by this patch. These
issues need further evalution to determine what change, if any, is
needed.
Where the new error messages are generated, in most cases the best
fix will be to move code from the BEFORE trigger to an AFTER
trigger. Where this is not feasible, the trigger can avoid the
error by re-issuing the triggering statement and returning NULL.
Documentation changes will be submitted in a separate patch.
Kevin Grittner and Tom Lane with input from Florian Pflug and
Robert Haas, based on problems encountered during conversion of
Wisconsin Circuit Court trigger logic to plpgsql triggers.
If an SMgrRelation is not "owned" by a relcache entry, don't allow it to
live past transaction end. This design allows the same SMgrRelation to be
used for blind writes of multiple blocks during a transaction, but ensures
that we don't hold onto such an SMgrRelation indefinitely. Because an
SMgrRelation typically corresponds to open file descriptors at the fd.c
level, leaving it open when there's no corresponding relcache entry can
mean that we prevent the kernel from reclaiming deleted disk space.
(While CacheInvalidateSmgr messages usually fix that, there are cases
where they're not issued, such as DROP DATABASE. We might want to add
some more sinval messaging for that, but I'd be inclined to keep this
type of logic anyway, since allowing VFDs to accumulate indefinitely
for blind-written relations doesn't seem like a good idea.)
This code replaces a previous attempt towards the same goal that proved
to be unreliable. Back-patch to 9.1 where the previous patch was added.
This is just refactoring, to make the functions accessible outside xlog.c.
A followup patch will make use of that, to allow fetching timeline history
files over streaming replication.
This fixes another error in commit 9e8da0f757.
I neglected to make the mark/restore functionality save and restore the
current set of array key values, which led to strange behavior if an
IndexScan with ScalarArrayOpExpr quals was used as the inner side of a
mergejoin. Per bug #7570 from Melese Tesfaye.
These calls were removed in commit 4240e429d0
as part of a general refactoring and improvement of DDL locking. However,
there's a problem not solved by the rewrite, which is that GRANT/REVOKE
update pg_class.relacl without taking any particular lock on the target
table as such. If another backend fails to do AcceptInvalidationMessages,
it won't notice a recently-committed change in ACLs. Bug #7557 from Piotr
Czachur demonstrates that there's at least one code path in 9.2.0 in which
a command fails to do any AcceptInvalidationMessages calls at all, if the
current transaction already holds all the locks it will need.
Since we're hard up against the release deadline for 9.2.1, fix this by
putting back the AcceptInvalidationMessages calls in heap_openrv and
heap_openrv_extended, thereby restoring the historical behavior in this
area. We ought to look for a more elegant and perhaps more bulletproof
solution, but there's no time for that right now.
When the startup process restores a WAL file from the archive, it deletes
any old file with the same name and renames the new file in its place. On
Windows, however, when a file is deleted, it still lingers as long as a
process holds a file handle open on it. With cascading replication, a
walsender process can hold the old file open, so the rename() in the startup
process would fail. To fix that, rename the old file to a temporary name, to
make the original file name available for reuse, before deleting the old
file.
Give the correct name of the GUC parameter being complained of.
Also, emit a more suitable SQLSTATE (INVALID_PARAMETER_VALUE,
not the default INTERNAL_ERROR).
Gurjeet Singh, errcode adjustment by me
The cascading replication code assumed that the current RecoveryTargetTLI
never changes, but that's not true with recovery_target_timeline='latest'.
The obvious upshot of that is that RecoveryTargetTLI in shared memory needs
to be protected by a lock. A less obvious consequence is that when a
cascading standby is connected, and the standby switches to a new target
timeline after scanning the archive, it will continue to stream WAL to the
cascading standby, but from a wrong file, ie. the file of the previous
timeline. For example, if the standby is currently streaming from the middle
of file 000000010000000000000005, and the timeline changes, the standby
will continue to stream from that file. However, the WAL on the new
timeline is in file 000000020000000000000005, so the standby sends garbage
from 000000010000000000000005 to the cascading standby, instead of the
correct WAL from file 000000020000000000000005.
This also fixes a related bug where a partial WAL segment is restored from
the archive and streamed to a cascading standby. The code assumed that when
a WAL segment is copied from the archive, it can immediately be fully
streamed to a cascading standby. However, if the segment is only partially
filled, ie. has the right size, but only N first bytes contain valid WAL,
that's not safe. That can happen if a partial WAL segment is manually copied
to the archive, or if a partial WAL segment is archived because a server is
started up on a new timeline within that segment. The cascading standby will
get confused if the WAL it received is not valid, and will get stuck until
it's restarted. This patch fixes that problem by not allowing WAL restored
from the archive to be streamed to a cascading standby until it's been
replayed, and thus validated.
This gets rid of a dangerous-looking use of the not-volatile XLogCtl
pointer in a couple of spinlock-protected sections, where the normal
coding rule is that you should only access shared memory through a
pointer-to-volatile. I think the risk is only hypothetical not actual,
since for there to be a bug the compiler would have to move the spinlock
acquire or release across the memcpy() call, which one sincerely hopes
it will not. Still, it looks cleaner this way.
Per comment from Daniel Farina and subsequent discussion.
This is mostly cosmetic, but it does eliminate a speculative portability
issue. The previous coding ignored the fact that sum_grow could easily
overflow (in fact, it could be summing multiple IEEE float infinities).
On a platform where that didn't guarantee to produce a positive result,
the code would misbehave. In any case, it was less than readable.
This reduces unnecessary exposure of other headers through htup.h, which
is very widely included by many files.
I have chosen to move the function prototypes to the new file as well,
because that means htup.h no longer needs to include tupdesc.h. In
itself this doesn't have much effect in indirect inclusion of tupdesc.h
throughout the tree, because it's also required by execnodes.h; but it's
something to explore in the future, and it seemed best to do the htup.h
change now while I'm busy with it.
Every time the best-tuple-found-so-far changes, we need to reset all
the penalty values in which_grow[] to the penalties for the new best
tuple. The old code failed to do this, resulting in inferior index
quality.
The original patch from Alexander Korotkov was just two lines; I took
the liberty of fleshing that out by adding a bunch of comments that I
hope will make this logic easier for others to understand than it was
for me.
This includes two micro-optimizations to the tight inner loop in descending
the SP-GiST tree: 1. avoid an extra function call to index_getprocinfo when
calling user-defined choose function, and 2. avoid a useless palloc+pfree
when node labels are not used.
The heapam XLog functions are used by other modules, not all of which
are interested in the rest of the heapam API. With this, we let them
get just the XLog stuff in which they are interested and not pollute
them with unrelated includes.
Also, since heapam.h no longer requires xlog.h, many files that do
include heapam.h no longer get xlog.h automatically, including a few
headers. This is useful because heapam.h is getting pulled in by
execnodes.h, which is in turn included by a lot of files.
This improves on commit 51fed14d73 by
eliminating the assumption that we can form <some pointer value> +
<some offset> without overflow. The entire point of those tests is that
we don't trust the offset value, so coding them in a way that could wrap
around if the buffer happens to be near the top of memory doesn't seem
sound. Instead, track the remaining space as a size_t variable and
compare offsets against that.
Also, improve comment about why we need the extra early check on
xl_tot_len.
If a WAL record header was split across pages, but xl_tot_len was 0, we
would get confused and conclude that we had already read the whole record,
and proceed to CRC check it. That can lead to a crash in RecordIsValid(),
which isn't careful to not read beyond end-of-record, as defined by
xl_tot_len.
Add an explicit sanity check for xl_tot_len <= SizeOfXlogRecord. Also,
make RecordIsValid() more robust by checking in each step that it doesn't
try to access memory beyond end of record, even if a length field in the
record's or a backup block's header is bogus.
Per report and analysis by Tom Lane.
We use a hash table to track the parents of inner pages, but when inserting
to a leaf page, the caller of gistbufferinginserttuples() must pass a
correct block number of the leaf's parent page. Before gistProcessItup()
descends to a child page, it checks if the downlink needs to be adjusted to
accommodate the new tuple, and updates the downlink if necessary. However,
updating the downlink might require splitting the page, which might move the
downlink to a page to the right. gistProcessItup() doesn't realize that, so
when it descends to the leaf page, it might pass an out-of-date parent block
number as a result. Fix that by returning the block a tuple was inserted to
from gistbufferinginserttuples().
This fixes the bug reported by Zdeněk Jílovec.
Cascading replication copied the incoming file into pg_xlog but
didn't set path correctly, so the first attempt to open file failed
causing it to loop around and look for file in pg_xlog. So the
earlier coding worked, but accidentally rather than by design.
Spotted by Fujii Masao, fix by Fujii Masao and Simon Riggs
This was broken in commit ed0b409d22,
which revised the GlobalTransactionData struct to not include the
associated PGPROC as its first member, but overlooked one place where
a cast was used in reliance on that equivalence.
The most effective way of fixing this seems to be to create a new function
that looks up the GlobalTransactionData struct given the XID, and make
both TwoPhaseGetDummyBackendId and TwoPhaseGetDummyProc rely on that.
Per report from Robert Ross.
As noted by Noah Misch, btree_xlog_delete_get_latestRemovedXid is
critically dependent on the assumption that it's examining a consistent
state of the database. This was undocumented though, so the
seemingly-unrelated check for no active HS sessions might be thought to be
merely an optional optimization. Improve comments, and add an explicit
check of reachedConsistency just to be sure.
This function returns InvalidTransactionId (thereby killing all HS
transactions) in several cases that are not nearly unlikely enough for my
taste. This commit doesn't attempt to fix those deficiencies, just
document them.
Back-patch to 9.2, not from any real functional need but just to keep the
branches more closely synced to simplify possible future back-patching.
In yesterday's commit 962e0cc71e, I added the
ResolveRecoveryConflictWithSnapshot call in the wrong place. I correctly
put it before spgRedoVacuumRedirect itself would modify the index page ---
but not before RestoreBkpBlocks, so replay of a record with a full-page
image would modify the page before kicking off any conflicting HS
transactions. Oops.
The correct test for whether a redirection tuple is removable is whether
tuple's xid < RecentGlobalXmin, not OldestXmin; the previous coding
failed to protect index searches being done in concurrent transactions that
have no XID. This mirrors the recent fix in btree's page recycling logic
made in commit d3abbbebe5.
Also, WAL-log the newest XID of any removed redirection tuple on an index
page, and apply ResolveRecoveryConflictWithSnapshot during InHotStandby WAL
replay. This protects against concurrent Hot Standby transactions possibly
needing to see the redirection tuple(s).
Per my query of 2012-03-12 and subsequent discussion.
mdinit() was misusing IsBootstrapProcessingMode() to decide whether to
create an fsync pending-operations table in the current process. This led
to creating a table not only in the startup and checkpointer processes as
intended, but also in the bgwriter process, not to mention other auxiliary
processes such as walwriter and walreceiver. Creation of the table in the
bgwriter is fatal, because it absorbs fsync requests that should have gone
to the checkpointer; instead they just sit in bgwriter local memory and are
never acted on. So writes performed by the bgwriter were not being fsync'd
which could result in data loss after an OS crash. I think there is no
live bug with respect to walwriter and walreceiver because those never
perform any writes of shared buffers; but the potential is there for
future breakage in those processes too.
To fix, make AuxiliaryProcessMain() export the current process's
AuxProcType as a global variable, and then make mdinit() test directly for
the types of aux process that should have a pendingOpsTable. Having done
that, we might as well also get rid of the random bool flags such as
am_walreceiver that some of the aux processes had grown. (Note that we
could not have fixed the bug by examining those variables in mdinit(),
because it's called from BaseInit() which is run by AuxiliaryProcessMain()
before entering any of the process-type-specific code.)
Back-patch to 9.2, where the problem was introduced by the split-up of
bgwriter and checkpointer processes. The bogus pendingOpsTable exists
in walwriter and walreceiver processes in earlier branches, but absent
any evidence that it causes actual problems there, I'll leave the older
branches alone.
The Solaris Studio compiler warns about these instances, unlike more
mainstream compilers such as gcc. But manual inspection showed that
the code is clearly not reachable, and we hope no worthy compiler will
complain about removing this code.
Make it clearer that the passed stack mustn't be empty, and that we
are not supposed to fall off the end of the stack in the main loop.
Tighten the loop that extracts the root block number, too.
Markus Wanner and Tom Lane
Instead of letting every backend participating in a group commit wait
independently, have the first one that becomes ready to flush WAL wait
for the configured delay, and let all the others wait just long enough
for that first process to complete its flush. This greatly increases
the chances of being able to configure a commit_delay setting that
actually improves performance.
As a side consequence of this change, commit_delay now affects all WAL
flushes, rather than just commits. There was some discussion on
pgsql-hackers about whether to rename the GUC to, say, wal_flush_delay,
but in the absence of consensus I am leaving it alone for now.
Peter Geoghegan, with some changes, mostly to the documentation, by me.
Per testing by Andres Freund, this improves replication performance
and reduces replication latency and latency jitter. I was a bit
concerned about moving more work into XLogInsert, but testing seems
to show that it's not a problem in practice.
Along the way, improve comments for WaitLatchOrSocket.
Andres Freund. Review and stylistic cleanup by me.
If the record header is garbled, we're now quite likely to notice it before
we try to make a bogus memory allocation and run out of memory. That can
still happen, if the xlog record is split across pages (we cannot verify
the record header until reading the next page in that scenario), but this
reduces the chances. An out-of-memory is treated as a corrupt record
anyway, so this isn't a correctness issue, just a case of giving a better
error message.
Per Amit Kapila's suggestion.
The original coding failed miserably for BLCKSZ of 4K or less, as reported
by Josh Kupershmidt. With the present design for text indexes, a given
inner tuple could have up to 256 labels (requiring either 3K or 4K bytes
depending on MAXALIGN), which means that we can't positively guarantee no
failures for smaller blocksizes. But we can at least make it behave sanely
so long as there are few enough labels to fit on a page. Considering that
btree is also more prone to "index tuple too large" failures when BLCKSZ is
small, it's not clear that we should expend more work than this on this
case.
Avoid using LockPage(rel, 0, lockmode) to protect against changes to
the bucket mapping. Instead, an exclusive buffer content lock is now
viewed as sufficient permission to modify the metapage, and a shared
buffer content lock is used when such modifications need to be
prevented. This more relaxed locking regimen makes it possible that,
when we're busy getting a heavyweight bucket on the bucket we intend
to search or insert into, a bucket split might occur underneath us.
To compenate for that possibility, we use a loop-and-retry system:
release the metapage content lock, acquire the heavyweight lock on the
target bucket, and then reacquire the metapage content lock and check
that the bucket mapping has not changed. Normally it hasn't, and
we're done. But if by chance it has, we simply unlock the metapage,
release the heavyweight lock we acquired previously, lock the new
bucket, and loop around again. Even in the worst case we cannot loop
very many times here, since we don't split the same bucket again until
we've split all the other buckets, and 2^N gets big pretty fast.
This results in greatly improved concurrency, because we're
effectively replacing two lwlock acquire-and-release cycles in
exclusive mode (on one of the lock manager locks) with a single
acquire-and-release cycle in shared mode (on the metapage buffer
content lock). Testing shows that it's still not quite as good as
btree; for that, we'd probably have to find some way of getting rid
of the heavyweight bucket locks as well, which does not appear
straightforward.
Patch by me, review by Jeff Janes.
The latter was already the dominant use, and it's preferable because
in C the convention is that intXX means XX bits. Therefore, allowing
mixed use of int2, int4, int8, int16, int32 is obviously confusing.
Remove the typedefs for int2 and int4 for now. They don't seem to be
widely used outside of the PostgreSQL source tree, and the few uses
can probably be cleaned up by the time this ships.
This simplifies code that needs to do arithmetic on XLogRecPtrs.
To avoid changing on-disk format of data pages, the LSN on data pages is
still stored in the old format. That should keep pg_upgrade happy. However,
we have XLogRecPtrs embedded in the control file, and in the structs that
are sent over the replication protocol, so this changes breaks compatibility
of pg_basebackup and server. I didn't do anything about this in this patch,
per discussion on -hackers, the right thing to do would to be to change the
replication protocol to be architecture-independent, so that you could use
a newer version of pg_receivexlog, for example, against an older server
version.
This saves a few bytes of WAL space, but the real motivation is to make it
predictable how much WAL space a record requires, as it no longer depends
on whether we need to waste the last few bytes at end of WAL page because
the header doesn't fit.
The total length field of WAL record, xl_tot_len, is moved to the beginning
of the WAL record header, so that it is still always found on the first page
where a WAL record begins.
Bump WAL version number again as this is an incompatible change.
The continuation record only contained one field, xl_rem_len, so it makes
things simpler to just include it in the WAL page header. This wastes four
bytes on pages that don't begin with a continuation from previos page, plus
four bytes on every page, because of padding.
The motivation of this is to make it easier to calculate how much space a
WAL record needs. Before this patch, it depended on how many page boundaries
the record crosses. The motivation of that, in turn, is to separate the
allocation of space in the WAL from the copying of the record data to the
allocated space. Keeping the calculation of space required simple helps to
keep the critical section of allocating the space from WAL short. But that's
not included in this patch yet.
Bump WAL version number again, as this is an incompatible change.
The comments claimed that wasting the last segment made it easier to do
calculations with XLogRecPtrs, because you don't have problems representing
last-byte-position-plus-1 that way. In my experience, however, it only made
things more complicated, because the there was two ways to represent the
boundary at the beginning of a logical log file: logid = n+1 and xrecoff = 0,
or as xlogid = n and xrecoff = 4GB - XLOG_SEG_SIZE. Some functions were
picky about which representation was used.
Also, use a 64-bit segment number instead of the log/seg combination, to
point to a certain WAL segment. We assume that all platforms have a working
64-bit integer type nowadays.
This is an incompatible change in WAL format, so bumping WAL version number.
Because permissions are assigned to element types, not array types,
complaining about permission denied on an array type would be
misleading to users. So adjust the reporting to refer to the element
type instead.
In order not to duplicate the required logic in two dozen places,
refactor the permission denied reporting for types a bit.
pointed out by Yeb Havinga during the review of the type privilege
feature
There's no need to hold onto the locks until the files are needed,
and by doing it this way, we reduce the impact on other backends who
may be awaiting locks we hold.
Noah Misch
When I implemented the ginbuildempty() function as part of
implementing unlogged tables, I falsified the note in the header
comment for log_newpage. Although we could fix that up by changing
the comment, it seems cleaner to add a new function which is
specifically intended to handle this case. So do that.
This reverts commit 18fb9d8d21. Per
discussion, it does not seem like a good idea to allow committed changes to
go un-checkpointed indefinitely, as could happen in a low-traffic server;
that makes us entirely reliant on the WAL stream with no redundancy that
might aid data recovery in case of disk failure.
This re-introduces the original problem of hot-standby setups generating a
small continuing stream of WAL traffic even when idle, but there are other
ways to address that without compromising crash recovery, so we'll revisit
that issue in a future release cycle.
This provides a speedup of about 4X when NBuffers is large enough.
There is also a useful reduction in sinval traffic, since we
only do CacheInvalidateSmgr() once not once per fork.
Simon Riggs, reviewed and somewhat revised by Tom Lane
WALSender now woken up after each background flush by WALwriter, avoiding
multi-second replication delay for an all-async commit workload.
Replication delay reduced from 7s with default settings to 200ms and often
much less, allowing significantly reduced data loss at failover.
Andres Freund and Simon Riggs
In lazy_scan_heap, we could issue bogus warnings about incorrect
information in the visibility map, because we checked the visibility
map bit before locking the heap page, creating a race condition. Fix
by rechecking the visibility map bit before we complain. Rejigger
some related logic so that we rely on the possibly-outdated
all_visible_according_to_vm value as little as possible.
In heap_multi_insert, it's not safe to clear the visibility map bit
before beginning the critical section. The visibility map is not
crash-safe unless we treat clearing the bit as a critical operation.
Specifically, if the transaction were to error out after we set the
bit and before entering the critical section, we could end up writing
the heap page to disk (with the bit cleared) and crashing before the
visibility map page made it to disk. That would be bad. heap_insert
has this correct, but somehow the order of operations got rearranged
when heap_multi_insert was added.
Also, add some more comments to visibilitymap_test, lazy_scan_heap,
and IndexOnlyNext, expounding on concurrency issues.
Per extensive code review by Andres Freund, and further review by Tom
Lane, who also made the original report about the bogus warnings.
When we allowed read-only transactions to skip assigning XIDs
we introduced the possibility that a fully deleted btree page
could be reused. This broke the index link sequence which could
then lead to indexscans silently returning fewer rows than would
have been correct. The actual incidence of silent errors from
this is thought to be very low because of the exact workload
required and locking pre-conditions. Fix is to remove pages only
if index page opaque->btpo.xact precedes RecentGlobalXmin.
Noah Misch, reviewed by Simon Riggs
We used to mimic the way a stack is constructed when descending the tree
during normal GiST inserts, but that was quite complicated during a buffered
build. It was also wrong: in GiST, the left-to-right relationships on
different levels might not match each other, so that when you know the
parent of a child page, you won't necessarily find the parent of the page to
the right of the child page by following the rightlinks at the parent level.
This sometimes led to "could not re-find parent" errors while building a
GiST index.
We now use a simple hash table to track the parent of every internal page.
Whenever a page is split, and downlinks are moved from one page to another,
we update the hash table accordingly. This is also better for performance
than the old method, as we never need to move right to re-find the parent
page, which could take a significant amount of time for buffers that were
created much earlier in the index build.
There were two bugs here: We forgot to call gistFreeBuildBuffers() function
at the end of build, and we passed interXact == true to BufFileCreateTemp,
so the file wasn't automatically cleaned up at end-of-transaction either.
The result of (maintenance_work_mem * 1024) / BLCKSZ doesn't fit in a signed
32-bit integer, if maintenance_work_mem >= 2GB. Use double instead. And
while we're at it, write the calculations in an easier to understand form,
with the intermediary steps written out and commented.
AbortOutOfAnyTransaction failed to do anything if the state it saw on
entry corresponded to failing partway through StartTransaction. I fixed
AbortCurrentTransaction to cope with that case way back in commit
60b2444cc3, but evidently overlooked that
AbortOutOfAnyTransaction should do likewise.
Back-patch to all supported branches. It's not clear that this omission
has any more-than-cosmetic consequences, but it's also not clear that it
doesn't, so back-patching seems the least risky choice.
The only interesting-for-performance case wherein we force heapscan here
is when we're rebuilding the relcache init file, and the only such case
that is likely to be examining a catalog big enough to be syncscanned is
RelationBuildTupleDesc. But the early-exit optimization in that code gets
broken if we start the scan at a random place within the catalog, so that
allowing syncscan is actually a big deoptimization if pg_attribute is large
(at least for the normal case where the rows for core system catalogs have
never been changed since initdb). Hence, prevent syncscan here. Per my
testing pursuant to complaints from Jeff Frost and Greg Sabino Mullane,
though neither of them seem to have actually hit this specific problem.
Back-patch to 8.3, where syncscan was introduced.
If a seqscan encounters many consecutive pages containing only dead tuples,
it can remain in the loop in heapgettup for a long time, and there was no
CHECK_FOR_INTERRUPTS anywhere in that loop. This meant there were
real-world situations where a query would be effectively uncancelable for
long stretches. Add a check placed to occur once per page, which should be
enough to provide reasonable response time without adding any measurable
overhead.
Report and patch by Merlin Moncure (though I tweaked it a bit).
Back-patch to all supported branches.
When we create a temporary copy of the old node buffer, in stack, we mustn't
leak that into any of the long-lived data structures. Before this patch,
when we called gistPopItupFromNodeBuffer(), it got added to the array of
"loaded buffers". After gistRelocateBuildBuffersOnSplit() exits, the
pointer added to the loaded buffers array points to garbage. Often that goes
unnotied, because when we go through the array of loaded buffers to unload
them, buffers with a NULL pageBuffer are ignored, which can often happen by
accident even if the pointer points to garbage.
This patch fixes that by marking the temporary copy in stack explicitly as
temporary, and refrain from adding buffers marked as temporary to the array
of loaded buffers.
While we're at it, initialize nodeBuffer->pageBlocknum to InvalidBlockNumber
and improve comments a bit. This isn't strictly necessary, but makes
debugging easier.
If the amount of freespace on page was less than the amount reserved by
fillfactor, the calculation would underflow.
This fixes bug #6643 reported by Tomonari Katsumata.
When the "hot" members of PGPROC were split off to separate PGXACT structs,
many PGPROC fields referred to in comments were moved to PGXACT, but the
comments were neglected in the commit. Mostly this is just a search/replace
of PGPROC with PGXACT, but the way the dummy PGPROC entries are created for
prepared transactions changed more, making some of the comments totally
bogus.
Noah Misch
When inserting the downlinks for a split gist page, we used hold the locks
on the child pages until the insertion into the parent - and recursively its
parent if it had to be split too - were all completed. Change that so that
the locks on child pages are released after the insertion in the immediate
parent is done, before recursing further up the tree.
This reduces the number of lwlocks that are held simultaneously. Holding
many locks is bad for concurrency, and in extreme cases you can even hit
the limit of 100 simultaneously held lwlocks in a backend. If you're really
unlucky, you can hit the limit while in a critical section, which brings
down the whole system.
This fixes bug #6629 reported by Tom Forbes. Backpatch to 9.1. The page
splitting code was rewritten in 9.1, and the old code did not have this
problem.
Users of asynchronous-commit mode expect there to be a guaranteed maximum
delay before an async commit's WAL records get flushed to disk. The
original version of the walwriter hibernation patch broke that. Add an
extra shared-memory flag to allow async commits to kick the walwriter out
of hibernation mode, without adding any noticeable overhead in cases where
no action is needed.
This patch modifies the walwriter process so that, when it has not found
anything useful to do for many consecutive wakeup cycles, it extends its
sleep time to reduce the server's idle power consumption. It reverts to
normal as soon as it's done any successful flushes. It's still true that
during any async commit, backends check for completed, unflushed pages of
WAL and signal the walwriter if there are any; so that in practice the
walwriter can get awakened and returned to normal operation sooner than the
sleep time might suggest.
Also, improve the checkpointer so that it uses a latch and a computed delay
time to not wake up at all except when it has something to do, replacing a
previous hardcoded 0.5 sec wakeup cycle. This also is primarily useful for
reducing the server's power consumption when idle.
In passing, get rid of the dedicated latch for signaling the walwriter in
favor of using its procLatch, since that comports better with possible
generic signal handlers using that latch. Also, fix a pre-existing bug
with failure to save/restore errno in walwriter's signal handlers.
Peter Geoghegan, somewhat simplified by Tom
At the time we check whether the tuple is dead to all running
transactions, we've already verified that it isn't visible to our
scan, setting hint bits if appropriate. So there's no need to
recheck CLOG for the all-dead test we do just a moment later.
So, add HeapTupleIsSurelyDead() to test the appropriate condition
under the assumption that all relevant hit bits are already set.
Review by Tom Lane.
This patch adjusts the core statistics views to match the decision already
taken for pg_stat_statements, that values representing elapsed time should
be represented as float8 and measured in milliseconds. By using float8,
we are no longer tied to a specific maximum precision of timing data.
(Internally, it's still microseconds, but we could now change that without
needing changes at the SQL level.)
The columns affected are
pg_stat_bgwriter.checkpoint_write_time
pg_stat_bgwriter.checkpoint_sync_time
pg_stat_database.blk_read_time
pg_stat_database.blk_write_time
pg_stat_user_functions.total_time
pg_stat_user_functions.self_time
pg_stat_xact_user_functions.total_time
pg_stat_xact_user_functions.self_time
The first four of these are new in 9.2, so there is no compatibility issue
from changing them. The others require a release note comment that they
are now double precision (and can show a fractional part) rather than
bigint as before; also their underlying statistics functions now match
the column definitions, instead of returning bigint microseconds.
The alternative of disallowing index-only scans in HS operation was
discussed, but the consensus was that it was better to treat marking
a page all-visible as a recovery conflict for snapshots that could still
fail to see XIDs on that page. We may in the future try to soften this,
so that we simply force index scans to do heap fetches in cases where
this may be an issue, rather than throwing a hard conflict.
The previous code could cause a backend crash after BEGIN; SAVEPOINT a;
LOCK TABLE foo (interrupted by ^C or statement timeout); ROLLBACK TO
SAVEPOINT a; LOCK TABLE foo, and might have leaked strong-lock counts
in other situations.
Report by Zoltán Böszörményi; patch review by Jeff Davis.
When using synchronous replication, we waited for the commit record to be
replicated, but if we our transaction didn't write any other WAL records,
that's not required because we don't even flush the WAL locally to disk in
that case. This lead to long waits when committing a transaction that only
modified a temporary table. Bug spotted by Thom Brown.
XLOG_GIN_UPDATE_META_PAGE and XLOG_GIN_DELETE_LISTPAGE records were printed
with a list link field labeled as "blkno", which was confusing, especially
when the link was empty (InvalidBlockNumber). Print the metapage block
number instead, since that's what's actually being updated. We could
include the link values too as a separate field, but not clear it's worth
the trouble.
Back-patch to 8.4 where the dubious code was added.
Initialise ckptXidEpoch from starting checkpoint and maintain the correct
value as we roll forwards. This allows GetNextXidAndEpoch() to return the
correct epoch when executed during recovery. Backpatch to 9.0 when the
problem is first observable by a user.
Bug report from Daniel Farina
It used to be case that lazy vacuum could call this function with only
a shared lock on the buffer, but neither lazy vacuum nor any other
code path does that any more. Simplify the code accordingly and clean
up some related, obsolete comments.
For those variables only used when asserts are enabled, use a new
macro PG_USED_FOR_ASSERTS_ONLY, which expands to
__attribute__((unused)) when asserts are not enabled.
A leaf tuple that we need to delete could get moved as a consequence of an
insertion happening concurrently with the VACUUM scan. If it moves from a
page past the current scan point to a page before, we'll miss it, which is
not acceptable. Hence, when we see a leaf-page REDIRECT that could have
been made since our scan started, chase down the redirection pointer much
as if we were doing a normal index search, and be sure to vacuum every page
it leads to. This fixes the issue because, if the tuple was on page N at
the instant we start our scan, we will surely find it as a consequence of
chasing the redirect from page N, no matter how much it moves around in
between. Problem noted by Takashi Yamamoto.
This patch fixes the other major compatibility-breaking limitation of
SPGiST, that it didn't store anything for null values of the indexed
column, and so could not support whole-index scans or "x IS NULL"
tests. The approach is to create a wholly separate search tree for
the null entries, and use fixed "allTheSame" insertion and search
rules when processing this tree, instead of calling the index opclass
methods. This way the opclass methods do not need to worry about
dealing with nulls.
Catversion bump is for pg_am updates as well as the change in on-disk
format of SPGiST indexes; there are some tweaks in SPGiST WAL records
as well.
Heavily rewritten version of a patch by Oleg Bartunov and Teodor Sigaev.
(The original also stored nulls separately, but it reused GIN code to do
so; which required undesirable compromises in the on-disk format, and
would likely lead to bugs due to the GIN code being required to work in
two very different contexts.)
The original API definition was incapable of supporting whole-index scans
because there was no way to invoke leaf-value reconstruction without
checking any qual conditions. Also, it was inefficient for
multiple-qual-condition scans because value reconstruction got done over
again for each qual condition, and because other internal work in the
consistent functions likewise had to be done for each qual. To fix these
issues, pass the whole scankey array to the opclass consistent functions,
instead of only letting them see one item at a time. (Essentially, the
loop over scankey entries is now inside the consistent functions not
outside them. This makes the consistent functions a bit more complicated,
but not unreasonably so.)
In itself this commit does nothing except save a few cycles in
multiple-qual-condition index scans, since we can't support whole-index
scans on SPGiST indexes until nulls are included in the index. However,
I consider this a must-fix for 9.2 because once we release it will get
very much harder to change the opclass API definition.
This simplifies the code a little bit. The new rule is that to update
XLogCtl->LogwrtResult, you must hold both WALWriteLock and info_lck, whereas
before we had two copies, one that was protected by WALWriteLock and another
protected by info_lck. The code that updates them was already holding both
locks, so merging the two is trivial.
The third copy, XLogCtl->Insert.LogwrtResult, was not totally redundant, it
was used in AdvanceXLInsertBuffer to update the backend-local copy, before
acquiring the info_lck to read the up-to-date value. But the value of that
seems dubious; at best it's saving one spinlock acquisition per completed
WAL page, which is not significant compared to all the other work involved.
And in practice, it's probably not saving even that much.
It's harmless to do full page writes even when not strictly necessary, so
when turning full_page_writes on, we can set the global flag first, and then
call XLogInsert. Likewise, when turning it off, we can write the WAL record
first, and then clear the flag. This way XLogInsert doesn't need any special
handling of the XLOG_FPW_CHANGE record type. XLogInsert is complicated
enough already, so anything we can keep away from there is a good thing.
Actually I don't think the atomicity of the shared memory flag matters,
anyway, because we only write the XLOG_FPW_CHANGE at the end of recovery,
when there are no concurrent WAL insertions going on. But might as well make
it safe, in case we allow changing full_page_writes on the fly in the
future.
Now that we have validate_xlog_location, call it from the previously
existing functions taking xlog locatoins as a string input.
Suggested by Fujii Masao
Comparing two xlog locations are useful for example when calculating
replication lag.
Euler Taveira de Oliveira, reviewed by Fujii Masao, and some cleanups
from me
Previously it was thought that it's impossible as the code stands, because
insertions create buffers as tuples are cascaded downwards, and index
split also creaters buffers eagerly for all halves. But the example from
Jay Levitt demonstrates that it can happen, when the root page is split.
It's in fact OK if the buffer doesn't exist, so we just need to remove the
sanity check. In fact, we've been discussing the possibility of destroying
empty buffers to conserve memory, which would render the sanity check
completely useless anyway.
Fix by Alexander Korotkov
In commit 4016bdef8a I fixed a bunch of
ginxlog.c bugs having to do with not handling XLogReadBuffer failures
correctly. However, in ginRedoUpdateMetapage and ginRedoDeleteListPages,
I unaccountably thought that failure to read the metapage would be
impossible and just put in an elog(PANIC) call. This is of course wrong:
failure is exactly what will happen if the index got dropped (or rebuilt)
between creation of the WAL record and the crash we're trying to recover
from. I believe this explains Nicholas Wilson's recent report of these
errors getting reached.
Also, fix memory leak in forgetIncompleteSplit. This wasn't of much
concern when the code was written, but in a long-running standby server
page split records could be expected to accumulate indefinitely.
Back-patch to 8.4 --- before that, GIN didn't have a metapage.
When "vacuuming" a single btree page by removing LP_DEAD tuples, we are not
actually within a vacuum operation, but rather in an ordinary insertion
process that could well be running concurrently with a vacuum. So clearing
the cycleid is incorrect, and could cause the concurrent vacuum to miss
removing tuples that it needs to remove. This is a longstanding bug
introduced by commit e6284649b9 of
2006-07-25. I believe it explains Maxim Boguk's recent report of index
corruption, and probably some other previously unexplained reports.
In 9.0 and up this is a one-line fix; before that we need to introduce a
flag to tell _bt_delitems what to do.
If tuples were toasted, heap_multi_insert didn't update the ctid on the
original tuples. This caused a failure if there was an after trigger
(including a foreign key), on the table, and a tuple got toasted.
Per off-list report and test case from Ted Phelps
Originally, most of this code assumed that no Postgres backends could be
running concurrently with it, and so no locking could be needed. That
assumption fails in Hot Standby. While it's still true that Hot Standby
backends should never change values like nextXid, they can examine them,
and consistency is important in some cases such as when computing a
snapshot. Therefore, prudence requires that WAL replay code obtain the
relevant locks when modifying such variables, even though it can examine
them without taking a lock. We were following that coding rule in some
places but not all. This commit applies the coding rule uniformly to all
updates of ShmemVariableCache and MultiXactState fields; a search of the
replay routines did not find any other cases that seemed to be at risk.
In addition, this commit fixes a longstanding thinko in replay of NEXTOID
and checkpoint records: we tried to advance nextOid only if it was behind
the value in the WAL record, but the comparison would draw the wrong
conclusion if OID wraparound had occurred since the previous value.
Better to just unconditionally assign the new value, since OID assignment
shouldn't be happening during replay anyway.
The additional locking seems to be more in the nature of future-proofing
than fixing any live bug, so I am not going to back-patch it. The NEXTOID
fix will be back-patched separately.
RestoreBkpBlocks was in the habit of zeroing and refilling the target
buffer; which was perfectly safe when the code was written, but is unsafe
during Hot Standby operation. The reason is that we have coding rules
that allow backends to continue accessing a tuple in a heap relation while
holding only a pin on its buffer. Such a backend could see transiently
zeroed data, if WAL replay had occasion to change other data on the page.
This has been shown to be the cause of bug #6425 from Duncan Rance (who
deserves kudos for developing a sufficiently-reproducible test case) as
well as Bridget Frey's re-report of bug #6200. It most likely explains the
original report as well, though we don't yet have confirmation of that.
To fix, change the code so that only bytes that are supposed to change will
change, even transiently. This actually saves cycles in RestoreBkpBlocks,
since it's not writing the same bytes twice.
Also fix seq_redo, which has the same disease, though it has to work a bit
harder to meet the requirement.
So far as I can tell, no other WAL replay routines have this type of bug.
In particular, the index-related replay routines, which would certainly be
broken if they had to meet the same standard, are not at risk because we
do not have coding rules that allow access to an index page when not
holding a buffer lock on it.
Back-patch to 9.0 where Hot Standby was added.
When testing bits (but not when setting or clearing them), we now
won't check whether the map has been extended. This significantly
improves performance in the case where the visibility map doesn't
exist yet, by avoiding an extra system call per tuple. To make
sure backends notice eventually, send an smgr inval on VM extension.
Dean Rasheed, with minor modifications by me.
When a backend needs to flush the WAL, and someone else is already flushing
the WAL, wait until it releases the WALInsertLock and check if we still need
to do the flush or if the other backend already did the work for us, before
acquiring WALInsertLock. This helps group commit, because when the WAL flush
finishes, all the backends that were waiting for it can be woken up in one
go, and the can all concurrently observe that they're done, rather than
waking them up one by one in a cascading fashion.
This is based on a new LWLock function, LWLockWaitUntilFree(), which has
peculiar semantics. If the lock is immediately free, it grabs the lock and
returns true. If it's not free, it waits until it is released, but then
returns false without grabbing the lock. This is used in XLogFlush(), so
that when the lock is acquired, the backend flushes the WAL, but if it's
not, the backend first checks the current flush location before retrying.
Original patch and benchmarking by Peter Geoghegan and Simon Riggs, although
this patch as committed ended up being very different from that.
Base backup follows recommended procedure, plus goes to great
lengths to ensure that partial page writes are avoided.
Jun Ishizuka and Fujii Masao, with minor modifications
Previously we used ReadRecPtr rather than EndRecPtr, which was
not a serious error but caused pg_stat_replication to report
incorrect replay_location until at least one WAL record is replayed.
Fujii Masao
In commit 7b0d0e9356, I made CLUSTER and
VACUUM FULL try to preserve toast value OIDs from the original toast table
to the new one. However, if we have to copy both live and recently-dead
versions of a row that has a toasted column, those versions may well
reference the same toast value with the same OID. The patch then led to
duplicate-key failures as we tried to insert the toast value twice with the
same OID. (The previous behavior was not very desirable either, since it
would have silently inserted the same value twice with different OIDs.
That wastes space, but what's worse is that the toast values inserted for
already-dead heap rows would not be reclaimed by subsequent ordinary
VACUUMs, since they go into the new toast table marked live not deleted.)
To fix, check if the copied OID already exists in the new toast table, and
if so, assume that it stores the desired value. This is reasonably safe
since the only case where we will copy an OID from a previous toast pointer
is when toast_insert_or_update was given that toast pointer and so we just
pulled the data from the old table; if we got two different values that way
then we have big problems anyway. We do have to assume that no other
backend is inserting items into the new toast table concurrently, but
that's surely safe for CLUSTER and VACUUM FULL.
Per bug #6393 from Maxim Boguk. Back-patch to 9.0, same as the previous
patch.
constructed before acquiring WALInsertLock, which slightly reduces the time
the lock is held. Although I could not measure any benefit in benchmarks,
the code is more readable this way.
Previously, this was hardcoded: we always had 8. Performance testing
shows that isn't enough, especially on big SMP systems, so we allow it
to scale up as high as 32 when there's adequate memory. On the flip
side, when shared_buffers is very small, drop the number of CLOG buffers
down to as little as 4, so that we can start the postmaster even
when very little shared memory is available.
Per extensive discussion with Simon Riggs, Tom Lane, and others on
pgsql-hackers.
In commit e2c2c2e8b1 I made use of nested
list structures to show which clauses went with which index columns, but
on reflection that's a data structure that only an old-line Lisp hacker
could love. Worse, it adds unnecessary complication to the many places
that don't much care which clauses go with which index columns. Revert
to the previous arrangement of flat lists of clauses, and instead add a
parallel integer list of column numbers. The places that care about the
pairing can chase both lists with forboth(), while the places that don't
care just examine one list the same as before.
The only real downside to this is that there are now two more lists that
need to be passed to amcostestimate functions in case they care about
column matching (which btcostestimate does, so not passing the info is not
an option). Rather than deal with 11-argument amcostestimate functions,
pass just the IndexPath and expect the functions to extract fields from it.
That gets us down to 7 arguments which is better than 11, and it seems
more future-proof against likely additions to the information we keep
about an index path.
When a view is marked as a security barrier, it will not be pulled up
into the containing query, and no quals will be pushed down into it,
so that no function or operator chosen by the user can be applied to
rows not exposed by the view. Views not configured with this
option cannot provide robust row-level security, but will perform far
better.
Patch by KaiGai Kohei; original problem report by Heikki Linnakangas
(in October 2009!). Review (in earlier versions) by Noah Misch and
others. Design advice by Tom Lane and myself. Further review and
cleanup by me.
smgrdounlink takes care to not throw an ERROR if it fails to unlink
something, but that caution was rendered useless by commit
3396000684, which put an smgrexists call in
front of it; smgrexists *does* throw error if anything looks funny, such
as getting a permissions error from trying to open the file. If that
happens post-commit, you get a PANIC, and what's worse the same logic
appears in the WAL replay code, so the database even fails to restart.
Restore the intended behavior by removing the smgrexists call --- it isn't
accomplishing anything that we can't do better by adjusting mdunlink's
ideas of whether it ought to warn about ENOENT or not.
Per report from Joseph Shraibman of unrecoverable crash after trying to
drop a table whose FSM fork had somehow gotten chmod'd to 000 permissions.
Backpatch to 8.4, where the bogus coding was introduced.
This adds support for the more or less SQL-conforming USAGE privilege
on types and domains. The intent is to be able restrict which users
can create dependencies on types, which restricts the way in which
owners can alter types.
reviewed by Yeb Havinga
On reflection, the original name seems way too generic for a global
symbol. A quick check shows this is the only exported function name
in SP-GiST that doesn't begin with "spg" or contain "SpGist", so the
rest of them seem all right.
Operator classes can specify whether or not they support this; this
preserves the flexibility to use lossy representations within an index.
In passing, move constant data about a given index into the rd_amcache
cache area, instead of doing fresh lookups each time we start an index
operation. This is mainly to try to make sure that spgcanreturn() has
insignificant cost; I still don't have any proof that it matters for
actual index accesses. Also, get rid of useless copying of FmgrInfo
pointers; we can perfectly well use the relcache's versions in-place.
The need for this was debated when we put in the index-only-scan feature,
but at the time we had no near-term expectation of having AMs that could
support such scans for only some indexes; so we kept it simple. However,
the SP-GiST AM forces the issue, so let's fix it.
This patch only installs the new API; no behavior actually changes.
SP-GiST is comparable to GiST in flexibility, but supports non-balanced
partitioned search structures rather than balanced trees. As described at
PGCon 2011, this new indexing structure can beat GiST in both index build
time and query speed for search problems that it is well matched to.
There are a number of areas that could still use improvement, but at this
point the code seems committable.
Teodor Sigaev and Oleg Bartunov, with considerable revisions by Tom Lane
Removing this bit from xl_info allows us to restore the old limit of four
(not three) separate pages touched by a WAL record, which is needed for the
upcoming SP-GiST feature, and will likely be useful elsewhere in future.
When we implemented XLR_BKP_REMOVABLE in 2007, we had to do it like that
because no special WAL-visible action was taken when starting a backup.
However, now we force a segment switch when starting a backup, so a
compressing WAL archiver (such as pglesslog) that uses the state shown in
the current page header will not be fooled as to removability of backup
blocks. The only downside is that the archiver will not return to
compressing mode for up to one WAL page after the backup is over, which is
a small price to pay for getting back the extra xl_info bit. In any case
the archiver could look for XLOG_BACKUP_END records if it thought it was
worth the trouble to do so.
Bump XLOG_PAGE_MAGIC since this is effectively a change in WAL format.
we don't reach consistency before replaying all of the WAL. Rename the
variable to reachedConsistency, to make its intention clearer.
In master, that was an active bug because of the recent patch to
immediately PANIC if a reference to a missing page is found in WAL after
reaching consistency, as Tom Lane's test case demonstrated. In 9.1 and 9.0,
the only consequence was a misleading "consistent recovery state reached at
%X/%X" message in the log at the beginning of crash recovery (the database
is not consistent at that point yet). In 8.4, the log message was not
printed in crash recovery, even though there was a similar
reachedMinRecoveryPoint local variable that was also set early. So,
backpatch to 9.1 and 9.0.
This patch creates an API whereby a btree index opclass can optionally
provide non-SQL-callable support functions for sorting. In the initial
patch, we only use this to provide a directly-callable comparator function,
which can be invoked with a bit less overhead than the traditional
SQL-callable comparator. While that should be of value in itself, the real
reason for doing this is to provide a datatype-extensible framework for
more aggressive optimizations, as in Peter Geoghegan's recent work.
Robert Haas and Tom Lane
invalid-page hash table, PANIC immediately. Immediate PANIC is much better
than waiting for end-of-recovery, which is what we did before, because the
end-of-recovery might not come until months later if this is a standby
server.
Also refrain from creating a restartpoint if there are invalid-page entries
in the hash table. Restarting recovery from such a restartpoint would not
see the invalid references, and wouldn't be able to cross-check them when
consistency is reached. That wouldn't matter when things are going smoothly,
but the more sanity checks you have the better.
Fujii Masao
In the previous coding, callers were faced with an awkward choice:
look up the name, do permissions checks, and then lock the table; or
look up the name, lock the table, and then do permissions checks.
The first choice was wrong because the results of the name lookup
and permissions checks might be out-of-date by the time the table
lock was acquired, while the second allowed a user with no privileges
to interfere with access to a table by users who do have privileges
(e.g. if a malicious backend queues up for an AccessExclusiveLock on
a table on which AccessShareLock is already held, further attempts
to access the table will be blocked until the AccessExclusiveLock
is obtained and the malicious backend's transaction rolls back).
To fix, allow callers of RangeVarGetRelid() to pass a callback which
gets executed after performing the name lookup but before acquiring
the relation lock. If the name lookup is retried (because
invalidation messages are received), the callback will be re-executed
as well, so we get the best of both worlds. RangeVarGetRelid() is
renamed to RangeVarGetRelidExtended(); callers not wishing to supply
a callback can continue to invoke it as RangeVarGetRelid(), which is
now a macro. Since the only one caller that uses nowait = true now
passes a callback anyway, the RangeVarGetRelid() macro defaults nowait
as well. The callback can also be used for supplemental locking - for
example, REINDEX INDEX needs to acquire the table lock before the index
lock to reduce deadlock possibilities.
There's a lot more work to be done here to fix all the cases where this
can be a problem, but this commit provides the general infrastructure
and fixes the following specific cases: REINDEX INDEX, REINDEX TABLE,
LOCK TABLE, and and DROP TABLE/INDEX/SEQUENCE/VIEW/FOREIGN TABLE.
Per discussion with Noah Misch and Alvaro Herrera.
Use of a randomly chosen large value was never exactly graceful, and
now that there are penalty functions that are intentionally using infinity,
it doesn't seem like a good idea for null-vs-not-null to be using something
less.
A simple thinko in ginRedoUpdateMetapage, namely failing to increment a
loop counter, led to inserting records into the last pending-list page in
the wrong order (the opposite of that intended). So far as I can tell,
this would not upset the code that eventually flushes pending items into
the main part of the GIN index. But it did break the code that searched
the pending list for matches, resulting in transient failure to find
matching entries during index lookups, as illustrated in bug #6307 from
Maksym Boguk.
Back-patch to 8.4 where the incorrect code was introduced.
This speeds up snapshot-taking and reduces ProcArrayLock contention.
Also, the PGPROC (and PGXACT) structures used by two-phase commit are
now allocated as part of the main array, rather than in a separate
array, and we keep ProcArray sorted in pointer order. These changes
are intended to minimize the number of cache lines that must be pulled
in to take a snapshot, and testing shows a substantial increase in
performance on both read and write workloads at high concurrencies.
Pavan Deolasee, Heikki Linnakangas, Robert Haas
When wal_level = 'hot_standby' we touched the last page of the
relation during a VACUUM, even if nothing else had happened.
That would alter the LSN of the last block and set the mtime
of the relation file unnecessarily. Noted by Thom Brown.
Previously we waited for wal_writer_delay before flushing WAL. Now
we also wake WALWriter as soon as a WAL buffer page has filled.
Significant effect observed on performance of asynchronous commits
by Robert Haas, attributed to the ability to set hint bits on tuples
earlier and so reducing contention caused by clog lookups.
Forgot to call RestoreBkpBlocks() in the redo-function, as pointed out by
Simon Riggs. In redo of a regular heap insert, it's taken care of in
heap_redo(), but this new record type uses the heap2 RM, and heap2_redo()
does not take care of that for you.
Also, failed to reset the vmbuffer and all_visibile_cleared local variables
after switching to a new buffer.
This greatly reduces the WAL volume, especially when the table is narrow.
The overhead of locking the heap page is also reduced. Reduced WAL traffic
also makes it scale a lot better, if you run multiple COPY processes at
the same time.
In a regular VACUUM, it's OK to skip pages for which a cleanup lock
isn't immediately available; the next VACUUM will deal with them. If
we're scanning the entire relation to advance relfrozenxid, we might
need to wait, but only if there are tuples on the page that actually
require freezing. These changes should greatly reduce the incidence
of of vacuum processes getting "stuck".
Simon Riggs and Robert Haas
This assumption can be wrong when the toaster is passed a raw on-disk
tuple, because the tuple might pre-date an ALTER TABLE ADD COLUMN operation
that added columns without rewriting the table. In such a case the tuple's
natts value is smaller than what we expect from the tuple descriptor, and
so its t_hoff value could be smaller too. In fact, the tuple might not
have a null bitmap at all, and yet our current opinion of it is that it
contains some trailing nulls.
In such a situation, toast_insert_or_update did the wrong thing, because
to save a few lines of code it would use the old t_hoff value as the offset
where heap_fill_tuple should start filling data. This did not leave enough
room for the new nulls bitmap, with the result that the first few bytes of
data could be overwritten with null flag bits, as in a recent report from
Hubert Depesz Lubaczewski.
The particular case reported requires ALTER TABLE ADD COLUMN followed by
CREATE TABLE AS SELECT * FROM ... or INSERT ... SELECT * FROM ..., and
further requires that there be some out-of-line toasted fields in one of
the tuples to be copied; else we'll not reach the troublesome code.
The problem can only manifest in this form in 8.4 and later, because
before commit a77eaa6a95, CREATE TABLE AS or
INSERT/SELECT wouldn't result in raw disk tuples getting passed directly
to heap_insert --- there would always have been at least a junkfilter in
between, and that would reconstitute the tuple header with an up-to-date
t_natts and hence t_hoff. But I'm backpatching the tuptoaster change all
the way anyway, because I'm not convinced there are no older code paths
that present a similar risk.
If we have an inequality key that constrains the other end of the index,
it doesn't directly help us in doing the initial positioning ... but it
does imply a NOT NULL constraint on the index column. If the index stores
nulls at this end, we can use the implied NOT NULL condition for initial
positioning, just as if it had been stated explicitly. This avoids wasting
time when there are a lot of nulls in the column. This is the reverse of
the examples given in bugs #6278 and #6283, which were about failing to
stop early when we encounter nulls at the end of the indexscan.
As pointed out by Naoya Anzai, my previous try at this was a few bricks
shy of a load, because I had forgotten that the initial-positioning logic
might not try to skip over nulls at the end of the index the scan will
start from. We ought to fix that, because it represents an unnecessary
inefficiency, but first let's get the scan-stop logic back to a safe
state. With this patch, we preserve the performance benefit requested
in bug #6278 for the case of scanning forward into NULLs (in a NULLS
LAST index), but the reverse case of scanning backward across NULLs
when there's no suitable initial-positioning qual is still inefficient.
Previously, we skipped a checkpoint if no WAL had been written since
last checkpoint, though this does not appear in user documentation.
As of now, we skip a checkpoint until we have written at least one
enough WAL to switch the next WAL file. This greatly reduces the
level of activity and number of WAL messages generated by a very
low activity server. This is safe because the purpose of a checkpoint
is to act as a starting place for a recovery, in case of crash.
This patch maintains minimal WAL volume for replay in case of crash,
thus maintaining very low crash recovery time.
There was a timing window between when oldestActiveXid was derived
and when it should have been derived that only shows itself under
heavy load. Move code around to ensure correct timing of derivation.
No change to StartupSUBTRANS() code, which is where this failed.
Bug report by Chris Redekop
If a tuple in a syscache contains an out-of-line toasted field, and we
try to fetch that field shortly after some other transaction has committed
an update or deletion of the tuple, there is a race condition: vacuum
could come along and remove the toast tuples before we can fetch them.
This leads to transient failures like "missing chunk number 0 for toast
value NNNNN in pg_toast_2619", as seen in recent reports from Andrew
Hammond and Tim Uckun.
The design idea of syscache is that access to stale syscache entries
should be prevented by relation-level locks, but that fails for at least
two cases where toasted fields are possible: ANALYZE updates pg_statistic
rows without locking out sessions that might want to plan queries on the
same table, and CREATE OR REPLACE FUNCTION updates pg_proc rows without
any meaningful lock at all.
The least risky fix seems to be an idea that Heikki suggested when we
were dealing with a related problem back in August: forcibly detoast any
out-of-line fields before putting a tuple into syscache in the first place.
This avoids the problem because at the time we fetch the parent tuple from
the catalog, we should be holding an MVCC snapshot that will prevent
removal of the toast tuples, even if the parent tuple is outdated
immediately after we fetch it. (Note: I'm not convinced that this
statement holds true at every instant where we could be fetching a syscache
entry at all, but it does appear to hold true at the times where we could
fetch an entry that could have a toasted field. We will need to be a bit
wary of adding toast tables to low-level catalogs that don't have them
already.) An additional benefit is that subsequent uses of the syscache
entry should be faster, since they won't have to detoast the field.
Back-patch to all supported versions. The problem is significantly harder
to reproduce in pre-9.0 releases, because of their willingness to flush
every entry in a syscache whenever the underlying catalog is vacuumed
(cf CatalogCacheFlushRelation); but there is still a window for trouble.
The existing scan-direction-sensitive tests were overly complex, and
failed to stop the scan in cases where it's perfectly legitimate to do so.
Per bug #6278 from Maksym Boguk.
Back-patch to 8.3, which is as far back as the patch applies easily.
Doesn't seem worth sweating over a relatively minor performance issue in
8.2 at this late date. (But note that this was a performance regression
from 8.1 and before, so 8.2 is being left as an outlier.)
A transaction can export a snapshot with pg_export_snapshot(), and then
others can import it with SET TRANSACTION SNAPSHOT. The data does not
leave the server so there are not security issues. A snapshot can only
be imported while the exporting transaction is still running, and there
are some other restrictions.
I'm not totally convinced that we've covered all the bases for SSI (true
serializable) mode, but it works fine for lesser isolation modes.
Joachim Wieland, reviewed by Marko Tiikkaja, and rather heavily modified
by Tom Lane
This is merely an exercise in satisfying pedants, not a bug fix, because
in every case we were checking for failure later with ferror(), or else
there was nothing useful to be done about a failure anyway. Document
the latter cases.
In general the data returned by an index-only scan should have the
datatypes originally computed by FormIndexDatum. If the index opclasses
use "storage" datatypes different from their input datatypes, the scan
tuple will not have the same rowtype attributed to the index; but we had
a hard-wired assumption that that was true in nodeIndexonlyscan.c. We'd
already hacked around the issue for the one case where the types are
different in btree indexes (btree name_ops), but this would definitely
come back to bite us if we ever implement index-only scans in GiST.
To fix, require the index AM to explicitly provide the tupdesc for the
tuple it is returning. btree can just pass back the index's tupdesc, but
GiST will have to work harder when and if it supports index-only scans.
I had previously proposed fixing this by allowing the index AM to fill the
scan tuple slot directly; but on reflection that seemed like a module
layering violation, since TupleTableSlots are creatures of the executor.
At least in the btree case, it would also be less efficient, since the
tuple deconstruction work would occur even for rows later found to be
invisible to the scan's snapshot.
Add a column pg_class.relallvisible to remember the number of pages that
were all-visible according to the visibility map as of the last VACUUM
(or ANALYZE, or some other operations that update pg_class.relpages).
Use relallvisible/relpages, instead of an arbitrary constant, to estimate
how many heap page fetches can be avoided during an index-only scan.
This is pretty primitive and will no doubt see refinements once we've
acquired more field experience with the index-only scan mechanism, but
it's way better than using a constant.
Note: I had to adjust an underspecified query in the window.sql regression
test, because it was changing answers when the plan changed to use an
index-only scan. Some of the adjacent tests perhaps should be adjusted
as well, but I didn't do that here.
It's been bothering me for several days that pretending that the cstring
data stored in a btree name_ops column is really a "name" Datum could lead
to reading past the end of memory. However, given the current memory
layout used for index-only scans in the btree code, a crash is in fact not
possible. Document that so we don't break it. I have not thought of any
other solutions that aren't fairly ugly too, and most of them lose the
functionality of index-only scans on name columns altogether, so this seems
like the way to go.
The original idea of this patch was to make box picksplit run faster, by
eliminating unnecessary palloc() overhead, but that was obsoleted by the new
double-sorting split algorithm that doesn't call these functions so heavily
anymore. Nevertheless, the code looks better this way.
Original patch by me, reviewed and tidied up after the double-sorting patch
by Kevin Grittner.
We copy all the matched tuples off the page during _bt_readpage, instead of
expensively re-locking the page during each subsequent tuple fetch. This
costs a bit more local storage, but not more than 2*BLCKSZ worth, and the
reduction in LWLock traffic is certainly worth that. What's more, this
lets us get rid of the API wart in the original patch that said an index AM
could randomly decline to supply an index tuple despite having asserted
pg_am.amcanreturn. That will be important for future improvements in the
index-only-scan feature, since the executor will now be able to rely on
having the index data available.
When a btree index contains all columns required by the query, and the
visibility map shows that all tuples on a target heap page are
visible-to-all, we don't need to fetch that heap page. This patch depends
on the previous patches that made the visibility map reliable.
There's a fair amount left to do here, notably trying to figure out a less
chintzy way of estimating the cost of an index-only scan, but the core
functionality seems ready to commit.
Robert Haas and Ibrar Ahmed, with some previous work by Heikki Linnakangas.
Previously, the code assumed that the only possible action to take was
to delete files behind a certain cutoff point. The async notify code
was already a crock: it used a different "pagePrecedes" function for
truncation than for regular operation. By allowing it to pass a
callback to SlruScanDirectory it can do cleanly exactly what it needs to
do.
The clog.c code also had its own use for SlruScanDirectory, which is
made a bit simpler with this.
This patch has two distinct purposes: to report multiple problems in
postgresql.conf rather than always bailing out after the first one,
and to change the policy for whether changes are applied when there are
unrelated errors in postgresql.conf.
Formerly the policy was to apply no changes if any errors could be
detected, but that had a significant consistency problem, because in some
cases specific values might be seen as valid by some processes but invalid
by others. This meant that the latter processes would fail to adopt
changes in other parameters even though the former processes had done so.
The new policy is that during SIGHUP, the file is rejected as a whole
if there are any errors in the "name = value" syntax, or if any lines
attempt to set nonexistent built-in parameters, or if any lines attempt
to set custom parameters whose prefix is not listed in (the new value of)
custom_variable_classes. These tests should always give the same results
in all processes, and provide what seems a reasonably robust defense
against loading values from badly corrupted config files. If these tests
pass, all processes will apply all settings that they individually see as
good, ignoring (but logging) any they don't.
In addition, the postmaster does not abandon reading a configuration file
after the first syntax error, but continues to read the file and report
syntax errors (up to a maximum of 100 syntax errors per file).
The postmaster will still refuse to start up if the configuration file
contains any errors at startup time, but these changes allow multiple
errors to be detected and reported before quitting.
Alexey Klyukin, reviewed by Andy Colson and av (Alexander ?)
with some additional hacking by Tom Lane
pg_trgm was already doing this unofficially, but the implementation hadn't
been thought through very well and leaked memory. Restructure the core
GiST code so that it actually works, and document it. Ordinarily this
would have required an extra memory context creation/destruction for each
GiST index search, but I was able to avoid that in the normal case of a
non-rescanned search by finessing the handling of the RBTree. It used to
have its own context always, but now shares a context with the
scan-lifespan data structures, unless there is more than one rescan call.
This should make the added overhead unnoticeable in typical cases.
In hio.c, document how we avoid deadlock with respect to visibility map
buffer locks. In visibilitymap.c, update the LOCKING section of the
file header comment.
Both oversights noted by Heikki Linnakangas.
In REPEATABLE READ (nee SERIALIZABLE) mode, an attempt to do
GetTransactionSnapshot() between AbortTransaction and CleanupTransaction
failed, because GetTransactionSnapshot would recompute the transaction
snapshot (which is already wrong, given the isolation mode) and then
re-register it in the TopTransactionResourceOwner, leading to an Assert
because the TopTransactionResourceOwner should be empty of resources after
AbortTransaction. This is the root cause of bug #6218 from Yamamoto
Takashi. While changing plancache.c to avoid requesting a snapshot when
handling a ROLLBACK masks the problem, I think this is really a snapmgr.c
bug: it's lower-level than the resource manager mechanism and should not be
shutting itself down before we unwind resource manager resources. However,
just postponing the release of the transaction snapshot until cleanup time
didn't work because of the circular dependency with
TopTransactionResourceOwner. Fix by managing the internal reference to
that snapshot manually instead of depending on TopTransactionResourceOwner.
This saves a few cycles as well as making the module layering more
straightforward. predicate.c's dependencies on TopTransactionResourceOwner
go away too.
I think this is a longstanding bug, but there's no evidence that it's more
than a latent bug, so it doesn't seem worth any risk of back-patching.
As observed by Heikki, we need not conflict on heap page locks during an
insert; heap page locks are only aggregated tuple locks, they don't imply
locking "gaps" as index page locks do. So we can avoid some unnecessary
conflicts, and also do the SSI check while not holding exclusive lock on
the target buffer.
Kevin Grittner, reviewed by Jeff Davis. Back-patch to 9.1.
This oversight led to a massive memory leak --- upwards of 10KB per tuple
--- during creation-time verification of an exclusion constraint based on a
GIST index. In most other scenarios it'd just be a leak of 10KB that would
be recovered at end of query, so not too significant; though perhaps the
leak would be noticeable in a situation where a GIST index was being used
in a nestloop inner indexscan. In any case, it's a real leak of long
standing, so patch all supported branches. Per report from Harald Fuchs.
queuedForEmptying flag correctly on buffer when adding it to the queue.
Also, don't add buffer to the queue if it's there already. These were
harmless oversights; failing to set the flag just means that a buffer might
get added to the queue twice if more tuples are added to it (although that
can't actually happen at this point because all the upper buffers have
already been emptied), and having the same buffer twice in the emptying
queue is harmless. But better be tidy.
As per my recent proposal, this refactors things so that these typedefs and
macros are available in a header that can be included in frontend-ish code.
I also changed various headers that were undesirably including
utils/timestamp.h to include datatype/timestamp.h instead. Unsurprisingly,
this showed that half the system was getting utils/timestamp.h by way of
xlog.h.
No actual code changes here, just header refactoring.
When building a GiST index that doesn't fit in cache, buffers are attached
to some internal nodes in the index. This speeds up the build by avoiding
random I/O that would otherwise be needed to traverse all the way down the
tree to the find right leaf page for tuple.
Alexander Korotkov
walsender.h should depend on xlog.h, not vice versa. (Actually, the
inclusion was circular until a couple hours ago, which was even sillier;
but Bruce broke it in the expedient rather than logically correct
direction.) Because of that poor decision, plus blind application of
pgrminclude, we had a situation where half the system was depending on
xlog.h to include such unrelated stuff as array.h and guc.h. Clean up
the header inclusion, and manually revert a lot of what pgrminclude had
done so things build again.
This episode reinforces my feeling that pgrminclude should not be run
without adult supervision. Inclusion changes in header files in particular
need to be reviewed with great care. More generally, it'd be good if we
had a clearer notion of module layering to dictate which headers can sanely
include which others ... but that's a big task for another day.
This requires adjusting the API for syscache callback functions: they now
get a hash value, not a TID, to identify the target tuple. Most of them
weren't paying any attention to that argument anyway, but plancache did
require a small amount of fixing.
Also, improve performance a trifle by avoiding sending duplicate inval
messages when a heap_update isn't changing the catcache lookup columns.
This works around the problem that a catalog cache entry might contain a
toast pointer that we try to dereference just as a VACUUM FULL completes
on that catalog. We will see the sinval message on the cache entry when
we acquire lock on the toast table, but by that point we've already told
tuptoaster.c "here's the pointer to fetch", so it's difficult from a code
structural standpoint to update the pointer before we use it. Much less
painful to ensure that toast pointers are not invalidated in the first
place. We have to add a bit of code to deal with the case that a value
that previously wasn't toasted becomes so; but that should be a
seldom-exercised corner case, so the inefficiency shouldn't be significant.
Back-patch to 9.0. In prior versions, we didn't allow CLUSTER on system
catalogs, and VACUUM FULL didn't result in reassignment of toast OIDs, so
there was no problem.
The previous code tried to synchronize by unlinking the init file twice,
but that doesn't actually work: it leaves a window wherein a third process
could read the already-stale init file but miss the SI messages that would
tell it the data is stale. The result would be bizarre failures in catalog
accesses, typically "could not read block 0 in file ..." later during
startup.
Instead, hold RelCacheInitLock across both the unlink and the sending of
the SI messages. This is more straightforward, and might even be a bit
faster since only one unlink call is needed.
This has been wrong since it was put in (in 2002!), so back-patch to all
supported releases.
In pursuit of this (and with the expectation that WaitLatch will be needed
in more places), convert the latch field that was already added to PGPROC
for sync rep into a generic latch that is activated for all PGPROC-owning
processes, and change many of the standard backend signal handlers to set
that latch when a signal happens. This will allow WaitLatch callers to be
wakened properly by these signals.
In passing, fix a whole bunch of signal handlers that had been hacked to do
things that might change errno, without adding the necessary save/restore
logic for errno. Also make some minor fixes in unix_latch.c, and clean
up bizarre and unsafe scheme for disowning the process's latch. Much of
this has to be back-patched into 9.1.
Peter Geoghegan, with additional work by Tom
streamed backup, throw an error and refuse to start up. The restore has not
finished correctly in that case and the data directory is possibly corrupt.
We already errored out in case of archive recovery, but could not during
crash recovery because we couldn't distinguish between the case that
pg_start_backup() was called and the database then crashed (must not error,
data is OK), and the case that we're restoring from a backup and not all
the needed WAL was replayed (data can be corrupt).
To distinguish those cases, add a line to backup_label to indicate
whether the backup was taken with pg_start/stop_backup(), or by streaming
(ie. pg_basebackup).
This requires re-initdb, because of a new field added to the control file.
The original definition had the problem that timeouts exceeding about 2100
seconds couldn't be specified on 32-bit machines. Milliseconds seem like
sufficient resolution, and finer grain than that would be fantasy anyway
on many platforms.
Back-patch to 9.1 so that this aspect of the latch API won't change between
9.1 and later releases.
Peter Geoghegan
Don't try to allocate the default value for a string relopt in the same
palloc chunk as the relopt_string struct. That didn't work too well if you
added a built-in string relopt in the stringRelOpts array, as it's not
possible to have an initializer for a variable length struct in C. This
makes the code slightly simpler too.
While we're at it, move the call to validator function in
add_string_reloption to before the allocation, so that if someone does pass
a bogus default value, we don't leak memory.
Subtransaction locks now released en masse at main commit, rather than
repeatedly re-scanning for locks as we ascend the nested transaction tree.
Split transaction state TBLOCK_SUBEND into two states, TBLOCK_SUBCOMMIT
and TBLOCK_SUBRELEASE to allow the commit path to be optimised using
the existing code in ResourceOwnerRelease() which appears to have been
intended for this usage, judging from comments therein.
Standby servers can now have WALSender processes, which can work with
either WALReceiver or archive_commands to pass data. Fully updated
docs, including new conceptual terms of sending server, upstream and
downstream servers. WALSenders terminated when promote to master.
Fujii Masao, review, rework and doc rewrite by Simon Riggs
GISTInsertStack.childoffnum used to mean "offset of the downlink in this
node, pointing to the child node in the stack". It's now replaced with
downlinkoffnum, which means "offset of the downlink in the parent of this
node". gistFindPath() already used childoffnum with this new meaning, and
had an extra step at the end to pull all the childoffnum values down one
node in the stack, to adjust the stack for the meaning that childoffnum had
elsewhere. That's no longer required.
The reason to do this now is this new representation is more convenient for
the GiST fast build patch that Alexander Korotkov is working on.
While we're at it, replace the linked list used in gistFindPath with a
standard List, and make gistFindPath() static.
Alexander Korotkov, with some changes by me.
First, when following a right-link, we incorrectly marked the current page
as the parent of the right sibling. In reality, the parent of the right page
is the same as the parent of the current page (or some page to the right of
it, gistFindCorrectParent() will sort that out).
Secondly, when we follow a right-link, we must prepend, not append, the right
page to our list of pages to visit. That's because we assume that once we
hit a leaf page in the list, all the rest are leaf pages too, and give up.
To hit these bugs, you need concurrent actions and several unlucky accidents.
Another backend must split the root page, while you're in process of
splitting a lower-level page. Furthermore, while you scan the internal nodes
to re-find the parent, another backend needs to again split some more internal
pages. Even then, the bugs don't necessarily manifest as user-visible errors
or index corruption.
While we're at it, make the error reporting a bit better if gistFindPath()
fails to re-find the parent. It used to be an assertion, but an elog() seems
more appropriate.
Backpatch to all supported branches.
In the previous coding, we would look up a relation in RangeVarGetRelid,
lock the resulting OID, and then AcceptInvalidationMessages(). While
this was sufficient to ensure that we noticed any changes to the
relation definition before building the relcache entry, it didn't
handle the possibility that the name we looked up no longer referenced
the same OID. This was particularly problematic in the case where a
table had been dropped and recreated: we'd latch on to the entry for
the old relation and fail later on. Now, we acquire the relation lock
inside RangeVarGetRelid, and retry the name lookup if we notice that
invalidation messages have been processed meanwhile. Many operations
that would previously have failed with an error in the presence of
concurrent DDL will now succeed.
There is a good deal of work remaining to be done here: many callers
of RangeVarGetRelid still pass NoLock for one reason or another. In
addition, nothing in this patch guards against the possibility that
the meaning of an unqualified name might change due to the creation
of a relation in a schema earlier in the user's search path than the
one where it was previously found. Furthermore, there's nothing at
all here to guard against similar race conditions for non-relations.
For all that, it's a start.
Noah Misch and Robert Haas
detect postmaster death. Postmaster keeps the write-end of the pipe open,
so when it dies, children get EOF in the read-end. That can conveniently
be waited for in select(), which allows eliminating some of the polling
loops that check for postmaster death. This patch doesn't yet change all
the loops to use the new mechanism, expect a follow-on patch to do that.
This changes the interface to WaitLatch, so that it takes as argument a
bitmask of events that it waits for. Possible events are latch set, timeout,
postmaster death, and socket becoming readable or writeable.
The pipe method behaves slightly differently from the kill() method
previously used in PostmasterIsAlive() in the case that postmaster has died,
but its parent has not yet read its exit code with waitpid(). The pipe
returns EOF as soon as the process dies, but kill() continues to return
true until waitpid() has been called (IOW while the process is a zombie).
Because of that, change PostmasterIsAlive() to use the pipe too, otherwise
WaitLatch() would return immediately with WL_POSTMASTER_DEATH, while
PostmasterIsAlive() would claim it's still alive. That could easily lead to
busy-waiting while postmaster is in zombie state.
Peter Geoghegan with further changes by me, reviewed by Fujii Masao and
Florian Pflug.
This means that they can initially be added to a large existing table
without checking its initial contents, but new tuples must comply to
them; a separate pass invoked by ALTER TABLE / VALIDATE can verify
existing data and ensure it complies with the constraint, at which point
it is marked validated and becomes a normal part of the table ecosystem.
An non-validated CHECK constraint is ignored in the planner for
constraint_exclusion purposes; when validated, cached plans are
recomputed so that partitioning starts working right away.
This patch also enables domains to have unvalidated CHECK constraints
attached to them as well by way of ALTER DOMAIN / ADD CONSTRAINT / NOT
VALID, which can later be validated with ALTER DOMAIN / VALIDATE
CONSTRAINT.
Thanks to Thom Brown, Dean Rasheed and Jaime Casanova for the various
reviews, and Robert Hass for documentation wording improvement
suggestions.
This patch was sponsored by Enova Financial.
Such a condition is unsatisfiable in combination with any other type of
btree-indexable condition (since we assume btree operators are always
strict). 8.3 and 8.4 had an explicit test for this, which I removed in
commit 29c4ad9829, mistakenly thinking that
the case would be subsumed by the more general handling of IS (NOT) NULL
added in that patch. Put it back, and improve the comments about it, and
add a regression test case.
Per bug #6079 from Renat Nasyrov, and analysis by Dean Rasheed.
more consistent that way, since all the other PredicateLock* calls are
made in various heapam.c and index AM functions. The call in nodeSeqscan.c
was unnecessarily aggressive anyway, there's no need to try to lock the
relation every time a tuple is fetched, it's enough to do it once.
This has the user-visible effect that if a seq scan is initialized in the
executor, but never executed, we now acquire the predicate lock on the heap
relation anyway. We could avoid that by taking the lock on the first
heap_getnext() call instead, but it doesn't seem worth the trouble given
that it feels more natural to do it in heap_beginscan().
Also, remove the retail PredicateLockTuple() calls from heap_getnext(). In
a seqscan, started with heap_begin(), we're holding a whole-relation
predicate lock on the heap so there's no need to lock the tuples
individually.
Kevin Grittner and me
XLOG_XACT_COMMIT_COMPACT leaves out invalidation messages and relfilenodes,
saving considerable space for the vast majority of transaction commits.
XLOG_XACT_COMMIT keeps same definition as XLOG_PAGE_MAGIC 0xD067 and earlier.
Leonardo Francalanci and Simon Riggs
WAL records of type XLOG_BTREE_REUSE_PAGE were generated using a
latestRemovedXid one higher than actually needed because xid used was
page opaque->btpo.xact rather than an actually removed xid.
Noticed on an otherwise quiet system by Noah Misch.
Noah Misch and Simon Riggs
Since the names try_relation_openrv() and try_heap_openrv() don't seem
quite appropriate, rename the functions to relation_openrv_extended()
and heap_openrv_extended(). This is also more general, if we have a
future need for additional parameters that are of interest to only a
few callers.
This is infrastructure for a forthcoming patch to allow
get_object_address() to take a missing_ok argument as well.
Patch by me, review by Noah Misch.
It's been like this since HOT was originally introduced, but the logic
is complex enough that this is a recipe for bugs, as we've already
found out with SSI. So refactor heap_hot_search_buffer() so that it
can satisfy the needs of index_getnext(), and make index_getnext() use
that rather than duplicating the logic.
This change was originally proposed by Heikki Linnakangas as part of a
larger refactoring oriented towards allowing index-only scans. I
extracted and adjusted this part, since it seems to have independent
merit. Review by Jeff Davis.
This involves two main changes from the previous behavior. First,
when we set a bit in the visibility map, emit a new WAL record of type
XLOG_HEAP2_VISIBLE. Replay sets the page-level PD_ALL_VISIBLE bit and
the visibility map bit. Second, when inserting, updating, or deleting
a tuple, we can no longer get away with clearing the visibility map
bit after releasing the lock on the corresponding heap page, because
an intervening crash might leave the visibility map bit set and the
page-level bit clear. Making this work requires a bit of interface
refactoring.
In passing, a few minor but related cleanups: change the test in
visibilitymap_set and visibilitymap_clear to throw an error if the
wrong page (or no page) is pinned, rather than silently doing nothing;
this case should never occur. Also, remove duplicate definitions of
InvalidXLogRecPtr.
Patch by me, review by Noah Misch.
Btree pages were recycled after VACUUM deletes all records on a
page and then a subsequent VACUUM occurs after the RecentXmin
horizon is reached. Using RecentXmin meant that we did not respond
correctly to the user controls provide to avoid Hot Standby
conflicts and so spurious conflicts could be generated in some
workload combinations. We now reuse pages only when we reach
RecentGlobalXmin, which can be much later in the presence of long
running queries and is also controlled by vacuum_defer_cleanup_age
and hot_standby_feedback.
Noah Misch and Simon Riggs
snapshots, like in REINDEX, are basically non-transactional operations. The
DDL operation itself might participate in SSI, but there's separate
functions for that.
Kevin Grittner and Dan Ports, with some changes by me.
ReadRecord's habit of using both direct references to tmpRecPtr and
references to *RecPtr (which is pointing at tmpRecPtr) triggers an
optimization bug in gcc 4.6.0, which apparently has forgotten about
aliasing rules. Avoid the compiler bug, and make the code more readable
to boot, by getting rid of the direct references. Improve the comments
while at it.
Back-patch to all supported versions, in case they get built with 4.6.0.
Tom Lane, with some cosmetic suggestions from Alex Hunsaker
Apparently sane-looking penalty code might return small negative values,
for example because of roundoff error. This will confuse places like
gistchoose(). Prevent problems by clamping negative penalty values to
zero. (Just to be really sure, I also made it force NaNs to zero.)
Back-patch to all supported branches.
Alexander Korotkov
On further analysis, it turns out that it is not needed to duplicate predicate
locks to the new row version at update, the lock on the version that the
transaction saw as visible is enough. However, there was a different bug in
the code that checks for dangerous structures when a new rw-conflict happens.
Fix that bug, and remove all the row-version chaining related code.
Kevin Grittner & Dan Ports, with some comment editorialization by me.
The SSI patch inserted a call of RegisterPredicateLockingXid into
GetNewTransactionId, which was a bad idea on a couple of grounds. First,
it's not necessary to hold XidGenLock while manipulating that shared
memory, and doing so is bad because XidGenLock is a high-contention lock
that should be held for as short a time as possible. (Not to mention that
it adds an entirely unnecessary deadlock hazard, since we must take
SerializableXactHashLock as well.) Second, the specific place where it was
put was between extending CLOG and advancing nextXid, which could result in
unpleasant behavior in case of a failure there. Pull the call out to
AssignTransactionId, which is much safer and arguably better from a
modularity standpoint too.
There is more work to do to clean up the failure-before-advancing-nextXid
issue, but that is a separate change that will need to be back-patched.
So for the moment I just want to make GetNewTransactionId look the same as
it did in prior versions.
Experimentation with contrib/btree_gist shows that the majority of the GIST
support functions potentially need collation information. Safest policy
seems to be to pass it to all of them, instead of making assumptions about
which ones could possibly need it.
This patch is almost entirely cosmetic --- mostly cleaning up a lot of
neglected comments, and fixing code layout problems in places where the
patch made lines too long and then pgindent did weird things with that.
I did find a bug-of-omission in equalTupleDescs().
Before commit c016ce7281, this wasn't
needed, but now that multiple resource manager IDs can percolate down
through here, we have to make sure we know which one we've got.
Otherwise, we can confuse (for example) an XLOG_XACT_COMMIT record
with an XLOG_CHECKPOINT_SHUTDOWN record.
Review by Jaime Casanova
crash recovery, and throw an error if not. hubert depesz lubaczewski pointed
out that that situation also happens in the crash recovery following a
system crash that happens during an online backup.
We might want to do something smarter in 9.1, like put the check back for
backups taken with pg_basebackup, but that's for another patch.
Since collation is effectively an argument, not a property of the function,
FmgrInfo is really the wrong place for it; and this becomes critical in
cases where a cached FmgrInfo is used for varying purposes that might need
different collation settings. Fix by passing it in FunctionCallInfoData
instead. In particular this allows a clean fix for bug #5970 (record_cmp
not working). This requires touching a bit more code than the original
method, but nobody ever thought that collations would not be an invasive
patch...
This warning is new in gcc 4.6 and part of -Wall. This patch cleans
up most of the noise, but there are some still warnings that are
trickier to remove.
Honor index column's collation spec if there is one, don't go to the
expense of calling get_typcollation when we can reasonably assume that
all GIN storage types will use default collation, and be sure to set
a collation for the comparePartialFn too.
The previous functions of assign hooks are now split between check hooks
and assign hooks, where the former can fail but the latter shouldn't.
Aside from being conceptually clearer, this approach exposes the
"canonicalized" form of the variable value to guc.c without having to do
an actual assignment. And that lets us fix the problem recently noted by
Bernd Helmle that the auto-tune patch for wal_buffers resulted in bogus
log messages about "parameter "wal_buffers" cannot be changed without
restarting the server". There may be some speed advantage too, because
this design lets hook functions avoid re-parsing variable values when
restoring a previous state after a rollback (they can store a pre-parsed
representation of the value instead). This patch also resolves a
longstanding annoyance about custom error messages from variable assign
hooks: they should modify, not appear separately from, guc.c's own message
about "invalid parameter value".
Also avoid hardcoding the current default state by giving it the name
"on" and replace with a meaningful name that reflects its behaviour.
Coding only, no change in behaviour.
This means one less thing to configure when setting up synchronous
replication, and also avoids some ambiguity around what the behavior
should be when the settings of these variables conflict.
Fujii Masao, with additional hacking by me.
archive recovery.
It's possible to restore an online backup without recovery.conf, by simply
copying all the necessary WAL files to pg_xlog. "pg_basebackup -x" does that
too. That's the use case where this cross-check is useful.
Backpatch to 9.0. We used to do this in earlier versins, but in 9.0 the code
was inadvertently changed so that the check is only performed after archive
recovery.
Fujii Masao.
Change location LOG message so it works each time we pause, not
just for final pause.
Ensure that we pause only if we are in Hot Standby and can connect
to allow us to run resume function. This change supercedes the
code to override parameter recoveryPauseAtTarget to false if not
attempting to enter Hot Standby, which is now removed.
Startup process waited for cleanup lock but when hot_standby = off
the pid was not registered, so that the bgwriter would not wake
the waiting process as intended.
ensure that they use different checkpoints as the starting point. We use
the checkpoint redo location as a unique identifier for the base backup in
the end-of-backup record, and in the backup history file name.
Bug spotted by Fujii Masao.
All expression nodes now have an explicit output-collation field, unless
they are known to only return a noncollatable data type (such as boolean
or record). Also, nodes that can invoke collation-aware functions store
a separate field that is the collation value to pass to the function.
This avoids confusion that arises when a function has collatable inputs
and noncollatable output type, or vice versa.
Also, replace the parser's on-the-fly collation assignment method with
a post-pass over the completed expression tree. This allows us to use
a more complex (and hopefully more nearly spec-compliant) assignment
rule without paying for it in extra storage in every expression node.
Fix assorted bugs in the planner's handling of collations by making
collation one of the defining properties of an EquivalenceClass and
by converting CollateExprs into discardable RelabelType nodes during
expression preprocessing.
The initial collations patch treated a COLLATE spec as part of a TypeName,
following what can only be described as brain fade on the part of the SQL
committee. It's a lot more reasonable to treat COLLATE as a syntactically
separate object, so that it can be added in only the productions where it
actually belongs, rather than needing to reject it in a boatload of places
where it doesn't belong (something the original patch mostly failed to do).
In addition this change lets us meet the spec's requirement to allow
COLLATE anywhere in the clauses of a ColumnDef, and it avoids unfriendly
behavior for constructs such as "foo::type COLLATE collation".
To do this, pull collation information out of TypeName and put it in
ColumnDef instead, thus reverting most of the collation-related changes in
parse_type.c's API. I made one additional structural change, which was to
use a ColumnDef as an intermediate node in AT_AlterColumnType AlterTableCmd
nodes. This provides enough room to get rid of the "transform" wart in
AlterTableCmd too, since the ColumnDef can carry the USING expression
easily enough.
Also fix some other minor bugs that have crept in in the same areas,
like failure to copy recently-added fields of ColumnDef in copyfuncs.c.
While at it, document the formerly secret ability to specify a collation
in ALTER TABLE ALTER COLUMN TYPE, ALTER TYPE ADD ATTRIBUTE, and
ALTER TYPE ALTER ATTRIBUTE TYPE; and correct some misstatements about
what the default collation selection will be when COLLATE is omitted.
BTW, the three-parameter form of format_type() should go away too,
since it just contributes to the confusion in this area; but I'll do
that in a separate patch.
than doing it aggressively whenever the tail-XID pointer is advanced, because
this way we don't need to do it while holding SerializableXactHashLock.
This also fixes bug #5915 spotted by YAMAMOTO Takashi, and removes an
obsolete comment spotted by Kevin Grittner.
periodically rescan the archive for new timelines, while waiting for new WAL
segments to arrive. This allows you to set up a standby server that follows
the TLI change if another standby server is promoted to master. Before this,
you had to restart the standby server to make it notice the new timeline.
This patch only scans the archive for TLI changes, it won't follow a TLI
change in streaming replication. That is much needed too, but it would be a
much bigger patch than I dare to sneak in this late in the release cycle.
There was discussion on improving the sanity checking of the WAL segments so
that the system would notice more reliably if the new timeline isn't an
ancestor of the current one, but that is not included in this patch.
Reviewed by Fujii Masao.
If a standby is broadcasting reply messages and we have named
one or more standbys in synchronous_standby_names then allow
users who set synchronous_replication to wait for commit, which
then provides strict data integrity guarantees. Design avoids
sending and receiving transaction state information so minimises
bookkeeping overheads. We synchronize with the highest priority
standby that is connected and ready to synchronize. Other standbys
can be defined to takeover in case of standby failure.
This version has very strict behaviour; more relaxed options
may be added at a later date.
Simon Riggs and Fujii Masao, with reviews by Yeb Havinga, Jaime
Casanova, Heikki Linnakangas and Robert Haas, plus the assistance
of many other design reviewers.
Since this field is after a variable-length field, it can't simply be
accessed via the C struct for pg_index. Fortunately, the relcache already
did the dirty work of pulling the information out to where it can be
accessed easily, so this is a one-line fix.
Andres Freund
Change the way UPDATEs are handled. Instead of maintaining a chain of
tuple-level locks in shared memory, copy any existing locks on the old
tuple to the new tuple at UPDATE. Any existing page-level lock needs to
be duplicated too, as a lock on the new tuple. That was neglected
previously.
Store xmin on tuple-level predicate locks, to distinguish a lock on an old
already-recycled tuple from a new tuple at the same physical location.
Failure to distinguish them caused loops in the tuple-lock chains, as
reported by YAMAMOTO Takashi. Although we don't use the chain representation
of UPDATEs anymore, it seems like a good idea to store the xmin to avoid
some false positives if no other reason.
CheckSingleTargetForConflictsIn now correctly handles the case where a lock
that's being held is not reflected in the local lock table. That happens
if another backend acquires a lock on our behalf due to an UPDATE or a page
split.
PredicateLockPageCombine now retains locks for the page that is being
removed, rather than removing them. This prevents a potentially dangerous
false-positive inconsistency where the local lock table believes that a lock
is held, but it is actually not.
Dan Ports and Kevin Grittner
The originally committed patch for modifying CTEs didn't interact well
with EXPLAIN, as noted by myself, and also had corner-case problems with
triggers, as noted by Dean Rasheed. Those problems show it is really not
practical for ExecutorEnd to call any user-defined code; so split the
cleanup duties out into a new function ExecutorFinish, which must be called
between the last ExecutorRun call and ExecutorEnd. Some Asserts have been
added to these functions to help verify correct usage.
It is no longer necessary for callers of the executor to call
AfterTriggerBeginQuery/AfterTriggerEndQuery for themselves, as this is now
done by ExecutorStart/ExecutorFinish respectively. If you really need to
suppress that and do it for yourself, pass EXEC_FLAG_SKIP_TRIGGERS to
ExecutorStart.
Also, refactor portal commit processing to allow for the possibility that
PortalDrop will invoke user-defined code. I think this is not actually
necessary just yet, since the portal-execution-strategy logic forces any
non-pure-SELECT query to be run to completion before we will consider
committing. But it seems like good future-proofing.
Emit a log message when creating a named restore point, and improve
documentation for pg_create_restore_point().
Euler Taveira de Oliveira, per suggestions from Thom Brown, with some
additional wordsmithing by me.
These are needed to support reloading dumps of 9.0 installations containing
contrib/intarray or contrib/tsearch2. Since not only regular dump/reload
but binary upgrade would fail, it seems worth the trouble to carry these
stubs for awhile. Note that the contrib opclasses referencing these
functions will still work fine, since GIN doesn't actually pay any
attention to the declared signature of a support function.
Standby optionally sends back information about oldestXmin of queries
which is then checked and applied to the WALSender's proc->xmin.
GetOldestXmin() is modified slightly to agree with GetSnapshotData(),
so that all backends on primary include WALSender within their snapshots.
Note this does nothing to change the snapshot xmin on either master or
standby. Feedback piggybacks on the standby reply message.
vacuum_defer_cleanup_age is no longer used on standby, though parameter
still exists on primary, since some use cases still exist.
Simon Riggs, review comments from Fujii Masao, Heikki Linnakangas, Robert Haas
though must not update the last transaction timestamp.
Plus comment and message cleanup for recent named restore point.
Fujii Masao, minor changes by me
the standby has written, flushed, and applied the WAL. At the moment, this
is for informational purposes only, the values are only shown in
pg_stat_replication system view, but in the future they will also be needed
for synchronous replication.
Extracted from Simon riggs' synchronous replication patch by Robert Haas, with
some tweaking by me.
Specifying this option makes the server not wait for the
xlog to be archived, or emit a warning that it can't,
instead leaving the responsibility with the client.
This is useful when the log is being streamed using
the streaming protocol in parallel with the backup,
without having log archiving enabled.
This adds collation support for columns and domains, a COLLATE clause
to override it per expression, and B-tree index support.
Peter Eisentraut
reviewed by Pavel Stehule, Itagaki Takahiro, Robert Haas, Noah Misch
new recovery.conf parameter recovery_target_name allows PITR to
specify named points as recovery targets.
Jaime Casanova, reviewed by Euler Taveira de Oliveira, plus minor edits
If the standby was streaming when trigger file arrives, check also in the
archive for additional WAL files. This is a corner case since it is
unlikely that we would trigger a failover while the master is still
available and sending data to standby, while at the same time running in
archive mode and also while the streaming standby has fallen behind archive.
Someone would eventually be unlucky; we must plug all gaps however small.
Fujii Masao
Until now, our Serializable mode has in fact been what's called Snapshot
Isolation, which allows some anomalies that could not occur in any
serialized ordering of the transactions. This patch fixes that using a
method called Serializable Snapshot Isolation, based on research papers by
Michael J. Cahill (see README-SSI for full references). In Serializable
Snapshot Isolation, transactions run like they do in Snapshot Isolation,
but a predicate lock manager observes the reads and writes performed and
aborts transactions if it detects that an anomaly might occur. This method
produces some false positives, ie. it sometimes aborts transactions even
though there is no anomaly.
To track reads we implement predicate locking, see storage/lmgr/predicate.c.
Whenever a tuple is read, a predicate lock is acquired on the tuple. Shared
memory is finite, so when a transaction takes many tuple-level locks on a
page, the locks are promoted to a single page-level lock, and further to a
single relation level lock if necessary. To lock key values with no matching
tuple, a sequential scan always takes a relation-level lock, and an index
scan acquires a page-level lock that covers the search key, whether or not
there are any matching keys at the moment.
A predicate lock doesn't conflict with any regular locks or with another
predicate locks in the normal sense. They're only used by the predicate lock
manager to detect the danger of anomalies. Only serializable transactions
participate in predicate locking, so there should be no extra overhead for
for other transactions.
Predicate locks can't be released at commit, but must be remembered until
all the transactions that overlapped with it have completed. That means that
we need to remember an unbounded amount of predicate locks, so we apply a
lossy but conservative method of tracking locks for committed transactions.
If we run short of shared memory, we overflow to a new "pg_serial" SLRU
pool.
We don't currently allow Serializable transactions in Hot Standby mode.
That would be hard, because even read-only transactions can cause anomalies
that wouldn't otherwise occur.
Serializable isolation mode now means the new fully serializable level.
Repeatable Read gives you the old Snapshot Isolation level that we have
always had.
Kevin Grittner and Dan Ports, reviewed by Jeff Davis, Heikki Linnakangas and
Anssi Kääriäinen
Prior to 9.0, restartpoints never created, deleted, or recycled WAL
files, but now they can. This code makes log_checkpoints treat
checkpoints and restartpoints symmetrically. It also adjusts up
the documentation of the parameter to mention restartpoints.
Fujii Masao. Docs by me, as suggested by Itagaki Takahiro.
With this patch, pg_basebackup doesn't write a backup_label file in the
data directory, so it doesn't interfere with a pg_start/stop_backup() based
backup anymore. backup_label is still included in the backup, but it is
injected directly into the tar stream.
Heikki Linnakangas, reviewed by Fujii Masao and Magnus Hagander.
If wal_buffers is initially set to -1 (which is now the default), it's
replaced by 1/32nd of shared_buffers, with a minimum of 8 (the old default)
and a maximum of the XLOG segment size. The allowed range for manual
settings is still from 4 up to whatever will fit in shared memory.
Greg Smith, with implementation correction by me.
Move the actual functionality into a separate function that's
easier to call internally, and change the SQL-callable function
to be a wrapper calling this.
Also create a pg_abort_backup() function, only callable internally,
that does only the most vital parts of pg_stop_backup(), making it
safe(r) to call from error handlers.
The original coding could combine duplicate entries only when they
originated from the same qual condition. In particular it could not
combine cases where multiple qual conditions all give rise to full-index
scan requests, which is an expensive case well worth optimizing. Refactor
so that duplicates are recognized across all the quals.
Per my recent proposal(s). Null key datums can now be returned by
extractValue and extractQuery functions, and will be stored in the index.
Also, placeholder entries are made for indexable items that are NULL or
contain no keys according to extractValue. This means that the index is
now always complete, having at least one entry for every indexed heap TID,
and so we can get rid of the prohibition on full-index scans. A full-index
scan is implemented much the same way as partial-match scans were already:
we build a bitmap representing all the TIDs found in the index, and then
drive the results off that.
Also, introduce a concept of a "search mode" that can be requested by
extractQuery when the operator requires matching to empty items (this is
just as cheap as matching to a single key) or requires a full index scan
(which is not so cheap, but it sure beats failing or giving wrong answers).
The behavior remains backward compatible for opclasses that don't return
any null keys or request a non-default search mode.
Using these features, we can now make the GIN index opclass for anyarray
behave in a way that matches the actual anyarray operators for &&, <@, @>,
and = ... which it failed to do before in assorted corner cases.
This commit fixes the core GIN code and ginarrayprocs.c, updates the
documentation, and adds some simple regression test cases for the new
behaviors using the array operators. The tsearch and contrib GIN opclass
support functions still need to be looked over and probably fixed.
Another thing I intend to fix separately is that this is pretty inefficient
for cases where more than one scan condition needs a full-index search:
we'll run duplicate GinScanEntrys, each one of which builds a large bitmap.
There is some existing logic to merge duplicate GinScanEntrys but it needs
refactoring to make it work for entries belonging to different scan keys.
Note that most of gin.h has been split out into a new file gin_private.h,
so that gin.h doesn't export anything that's not supposed to be used by GIN
opclasses or the rest of the backend. I did quite a bit of other code
beautification work as well, mostly fixing comments and choosing more
appropriate names for things.
Foreign tables are a core component of SQL/MED. This commit does
not provide a working SQL/MED infrastructure, because foreign tables
cannot yet be queried. Support for foreign table scans will need to
be added in a future patch. However, this patch creates the necessary
system catalog structure, syntax support, and support for ancillary
operations such as COMMENT and SECURITY LABEL.
Shigeru Hanada, heavily revised by Robert Haas
Instead, declare a public wrapper of the sole function using it for
external callers, so that they don't have to always pass a NULL
argument.
Author: Kevin Grittner
The contents of an unlogged table are WAL-logged; thus, they are not
available on standby servers and are truncated whenever the database
system enters recovery. Indexes on unlogged tables are also unlogged.
Unlogged GiST indexes are not currently supported.
This privilege is required to do Streaming Replication, instead of
superuser, making it possible to set up a SR slave that doesn't
have write permissions on the master.
Superuser privileges do NOT override this check, so in order to
use the default superuser account for replication it must be
explicitly granted the REPLICATION permissions. This is backwards
incompatible change, in the interest of higher default security.
cleanup stage to finish incomplete inserts or splits anymore. There was two
reasons for the cleanup step:
1. When a new tuple was inserted to a leaf page, the downlink in the parent
needed to be updated to contain (ie. to be consistent with) the new key.
Updating the parent in turn might require recursively updating the parent of
the parent. We now handle that by updating the parent while traversing down
the tree, so that when we insert the leaf tuple, all the parents are already
consistent with the new key, and the tree is consistent at every step.
2. When a page is split, we need to insert the downlink for the new right
page(s), and update the downlink for the original page to not include keys
that moved to the right page(s). We now handle that by setting a new flag,
F_FOLLOW_RIGHT, on the non-rightmost pages in the split. When that flag is
set, scans always follow the rightlink, regardless of the NSN mechanism used
to detect concurrent page splits. That way the tree is consistent right after
split, even though the downlink is still missing. This is very similar to the
way B-tree splits are handled. When the downlink is inserted in the parent,
the flag is cleared. To keep the insertion algorithm simple, when an
insertion sees an incomplete split, indicated by the F_FOLLOW_RIGHT flag, it
finishes the split before doing anything else.
These changes allow removing the whole "invalid tuple" mechanism, but I
retained the scan code to still follow invalid tuples correctly. While we
don't create any such tuples anymore, we want to handle them gracefully in
case you pg_upgrade a GiST index that has them. If we encounter any on an
insert, though, we just throw an error saying that you need to REINDEX.
The issue that got me into doing this is that if you did a checkpoint while
an insert or split was in progress, and the checkpoint finishes quickly so
that there is no WAL record related to the insert between RedoRecPtr and the
checkpoint record, recovery from that checkpoint would not know to finish
the incomplete insert. IOW, we have the same issue we solved with the
rm_safe_restartpoint mechanism during normal operation too. It's highly
unlikely to happen in practice, and this fix is far too large to backpatch,
so we're just going to live with in previous versions, but this refactoring
fixes it going forward.
With this patch, you don't get the annoying
'index "FOO" needs VACUUM or REINDEX to finish crash recovery' notices
anymore if you crash at an unfortunate moment.
This case can arise if a transaction has written data, but only to
temporary tables. Loss of the commit record in case of a crash won't
matter, because the temporary tables will be lost anyway.
Reviewed by Heikki Linnakangas and Simon Riggs.
This commit replaces pg_class.relistemp with pg_class.relpersistence;
and also modifies the RangeVar node type to carry relpersistence rather
than istemp. It also removes removes rd_istemp from RelationData and
instead performs the correct computation based on relpersistence.
For clarity, we add three new macros: RelationNeedsWAL(),
RelationUsesLocalBuffers(), and RelationUsesTempNamespace(), so that we
can clarify the purpose of each check that previous depended on
rd_istemp.
This is intended as infrastructure for the upcoming unlogged tables
patch, as well as for future possible work on global temporary tables.
Purely cosmetic patch to make our coding standards more consistent ---
we were doing symbolic some places and octal other places. This patch
fixes all C-coded uses of mkdir, chmod, and umask. There might be some
other calls I missed. Inconsistency noted while researching tablespace
directory permissions issue.
Hot Standby conflicts only with tuples that were visible at
some point. So ignore tuples from aborted transactions or for
tuples updated/deleted during the inserting transaction when
generating the conflict transaction ids.
Following detailed analysis and test case by Noah Misch.
Original report covered btree delete records, correctly observed
by Heikki Linnakangas that this applies to other cases also.
Fix covers all sources of cleanup records via common code.
First, avoid scanning the whole ProcArray once we know there
are at least commit_siblings active; second, skip the check
altogether if commit_siblings = 0.
Greg Smith
an old transaction running in the master, and a lot of transactions have
started and finished since, and a WAL-record is written in the gap between
the creating the running-xacts snapshot and WAL-logging it, recovery will fail
with "too many KnownAssignedXids" error. This bug was reported by
Joachim Wieland on Nov 19th.
In the same scenario, when fewer transactions have started so that all the
xids fit in KnownAssignedXids despite the first bug, a more serious bug
arises. We incorrectly initialize the clog code with the oldest still running
transaction, and when we see the WAL record belonging to a transaction with
an XID larger than one that committed already before the checkpoint we're
recovering from, we zero the clog page containing the already committed
transaction, leading to data loss.
In hindsight, trying to track xids in the known-assigned-xids array before
seeing the running-xacts record was too complicated. To fix that, hold
XidGenLock while the running-xacts snapshot is taken and WAL-logged. That
ensures that no transaction can begin or end in that gap, so that in recvoery
we know that the snapshot contains all transactions running at that point in
WAL.
1. Complain, rather than silently doing nothing, if an "invalid" tuple
is found on a leaf page. Per off-list discussion with Heikki.
2. Fix oversight in code that removes a GISTSearchItem from the search
queue: we have to reset lastHeap if this was the last heap item in the
parent GISTSearchTreeItem. Otherwise subsequent additions will do the
wrong thing. This was probably masked in early testing because in typical
cases the parent item would now be completely empty and would be deleted on
next call. You'd need a queued non-leaf page at exactly the same distance
as a heap tuple to expose the bug.
This commit represents a rather heavily editorialized version of
Teodor's builtin_knngist_itself-0.8.2 and builtin_knngist_proc-0.8.1
patches. I redid the opclass API to add a separate Distance method
instead of turning the Consistent method into an illogical mess,
fixed some bit-rot in the rbtree interfaces, and generally worked over
the code style and comments.
There's still no non-code documentation to speak of, but I'll work on
that separately. Some contrib-module changes are also yet to come
(right now, point <-> point is the only KNN-ified operator).
Teodor Sigaev and Tom Lane
This eliminates some crufty, special-purpose code and, as a non-trivial
side benefit, allows recovery.conf parameters to be unquoted.
Dimitri Fontaine, with review and cleanup by Alvaro Herrera, Itagaki
Takahiro, and me.
This is a heavily revised version of builtin_knngist_core-0.9. The
ordering operators are no longer mixed in with actual quals, which would
have confused not only humans but significant parts of the planner.
Instead, ordering operators are carried separately throughout planning and
execution.
Since the API for ambeginscan and amrescan functions had to be changed
anyway, this commit takes the opportunity to rationalize that a bit.
RelationGetIndexScan no longer forces a premature index_rescan call;
instead, callers of index_beginscan must call index_rescan too. Aside from
making the AM-side initialization logic a bit less peculiar, this has the
advantage that we do not make a useless extra am_rescan call when there are
runtime key values. AMs formerly could not assume that the key values
passed to amrescan were actually valid; now they can.
Teodor Sigaev and Tom Lane
temporary indexes are not WAL-logged. We used a constant LSN for temporary
indexes, on the assumption that we don't need to worry about concurrent page
splits in temporary indexes because they're only visible to the current
session. But that assumption is wrong, it's possible to insert rows and
split pages in the same session, while a scan is in progress. For example,
by opening a cursor and fetching some rows, and INSERTing new rows before
fetching some more.
Fix by generating fake increasing LSNs, used in place of real LSNs in
temporary GiST indexes.
location read from backup label file can be found: wasShutdown was set
incorrectly when a backup label file was found.
Jeff Davis, with a little tweaking by me.
length stored in the line pointer the same way it's calculated in the normal
heap_insert() codepath. As noted by Jeff Davis, the length stored by
raw_heap_insert() included padding but the one stored by the normal codepath
did not. While the mismatch seems to be harmless, inconsistency isn't good,
and the normal codepath has received a lot more testing over the years.
Backpatch to 8.3 where the heap rewrite code was introduced.
rather than 0/0, so that we can safely use 0/0 as an invalid value. This is a
more future-proof fix for the corner-case bug in streaming replication that
was fixed yesterday. We had a similar corner-case bug with log/seg 0/0 back in
February as well. Avoiding 0/0 as a valid value should prevent bugs like that
in the future. Per Tom Lane's idea.
Back-patch to 9.0. Since this only affects bootstrapping, it makes no
difference to existing installations. We don't need to worry about the
bug in existing installations, because if you've managed to get past the
initial base backup already, you won't hit the bug in the future either.
streaming replication. We used log/seg 0/0 to indicate that no WAL segments
have been removed since startup, but 0/0 is a valid value for the very first
WAL segment after initdb. To make that disambiguous, store
(latest removed WAL segment + 1) in the global variable.
Per report from Matt Chesler, also reproduced by Greg Smith.
that WAL file containing the checkpoint redo-location can be found. This
avoids making the cluster irrecoverable if the redo location is in an earlie
WAL file than the checkpoint record.
Report, analysis and patch by Jeff Davis, with small changes by me.
Split the old typenameTypeId() into two functions: A new typenameTypeId() that
returns only a type OID, and typenameTypeIdAndMod() that returns type OID and
typmod. This isolates call sites better that actually care about the typmod.
outside a transaction.
This repairs brain fade in my patch of 2009-08-30: the reason we had been
storing oldest-database name, not OID, in ShmemVariableCache was of course
to avoid having to do a catalog lookup at times when it might be unsafe.
This error explains why Aleksandr Dushein is having trouble getting out of
an XID wraparound state in bug #5718, though not how he got into that state
in the first place. I suspect pg_upgrade is at fault there.
This call was present in the aboriginal code from Berkeley, and has
never been touched; it may very well be that it was there to mask
effects of bugs in other places and it may no longer be necessary.
The removal has been foreseen in a code comment since 2007; this seems
to be a good time to test this hypothesis.
The GIN code has absolutely no business exporting GIN-specific functions
with names as generic as compareItemPointers() or newScanKey(); that's
just trouble waiting to happen. I got annoyed about this again just now
and decided to fix it. This commit ensures that all global symbols
defined in access/gin/ have names including "gin" or "Gin". There were a
couple of cases, like names involving "PostingItem", where arguably the
names were already sufficiently nongeneric; but I figured as long as I was
risking creating merge problems for unapplied GIN patches I might as well
impose a uniform policy.
I didn't touch any static symbol names. There might be some places
where it'd be appropriate to rename some static functions to match
siblings that are exported, but I'll leave that for another time.
The better estimate requires more statistics than we previously stored:
in particular, counts of "entry" versus "data" pages within the index,
as well as knowledge of the number of distinct key values. We collect
this information during initial index build and update it during VACUUM,
storing the info in new fields on the index metapage. No initdb is
required because these fields will read as zeroes in a pre-existing
index, and the new gincostestimate code is coded to behave (reasonably)
sanely if they are zeroes.
Teodor Sigaev, reviewed by Jan Urbanski, Tom Lane, and Itagaki Takahiro.
The original coding was quite sloppy about handling the case where
XLogReadBuffer fails (because the page has since been deleted). This
would result in either "bad buffer id: 0" or an Assert failure during
replay, if indeed the page were no longer there. In a couple of places
it also neglected to check whether the change had already been applied,
which would probably result in corrupted index contents. I believe that
bug #5703 is an instance of the first problem. These issues could show up
without replication, but only if you were unfortunate enough to crash
between modification of a GIN index and the next checkpoint.
Back-patch to 8.2, which is as far back as GIN has WAL support.
This patch resurrects some of the information that could be logged by the
old, now-dead implementation of VACUUM FULL, in particular counts of live
and dead tuples and the time taken for the table rebuild proper. There's
still no logging about the ensuing index rebuilds, though.
Itagaki Takahiro
new WAL arrives via streaming replication. This reduces the latency, and
also allows us to use a longer polling interval, which is good for energy
efficiency.
We still need to poll to check for the appearance of a trigger file, but
the interval is now 5 seconds (instead of 100ms), like when waiting for
a new WAL segment to appear in WAL archive.
transaction snapshots, i.e. a snapshot registered at the beginning of
a transaction. Change variable naming and comments to reflect this reality
in preparation for a future, truly serializable mode, e.g.
Serializable Snapshot Isolation (SSI).
For the moment transaction snapshots are still used to implement
SERIALIZABLE, but hopefully not for too much longer. Patch by Kevin
Grittner and Dan Ports with review and some minor wording changes by me.
wait until it is set. Latches can be used to reliably wait until a signal
arrives, which is hard otherwise because signals don't interrupt select()
on some platforms, and even when they do, there's race conditions.
On Unix, latches use the so called self-pipe trick under the covers to
implement the sleep until the latch is set, without race conditions. On
Windows, Windows events are used.
Use the new latch abstraction to sleep in walsender, so that as soon as
a transaction finishes, walsender is woken up to immediately send the WAL
to the standby. This reduces the latency between master and standby, which
is good.
Preliminary work by Fujii Masao. The latch implementation is by me, with
helpful comments from many people.
initialize the rd_backend field of a fake Relation entry correctly.
Fortunately, that is easy, since only non-temp relations should ever be
mentioned in the WAL stream.
This patch changes _bt_split() and _bt_pagedel() to throw a plain ERROR,
rather than PANIC, for several cases that are reported from the field
from time to time:
* right sibling's left-link doesn't match;
* PageAddItem failure during _bt_split();
* parent page's next child isn't right sibling during _bt_pagedel().
In addition the error messages for these cases have been made a bit
more verbose, with additional values included.
The original motivation for PANIC here was to capture core dumps for
subsequent analysis. But with so many users whose platforms don't capture
core dumps by default, or who are unprepared to analyze them anyway, it's hard
to justify a forced database restart when we can fairly easily detect the
problems before we've reached the critical sections where PANIC would be
necessary. It is not currently known whether the reports of these messages
indicate well-hidden bugs in Postgres, or are a result of storage-level
malfeasance; the latter possibility suggests that we ought to try to be more
robust even if there is a bug here that's ultimately found.
Backpatch to 8.2. The code before that is sufficiently different that
it doesn't seem worth the trouble to back-port further.
In the new API introduced by my patch to include the backend ID in
temprel filenames, the last argument to smrgextend() became skipFsync
rather than isTemp, but these calls didn't get the memo. It's not
really a problem to pass rel->rd_istemp rather than just plain false,
because smgrextend() now automatically skips the fsync for temprels
anyway, but this seems cleaner and saves some minute number of cycles.
This allows us to reliably remove all leftover temporary relation
files on cluster startup without reference to system catalogs or WAL;
therefore, we no longer include temporary relations in XLOG_XACT_COMMIT
and XLOG_XACT_ABORT WAL records.
Since these changes require including a backend ID in each
SharedInvalSmgrMsg, the size of the SharedInvalidationMessage.id
field has been reduced from two bytes to one, and the maximum number
of connections has been reduced from INT_MAX / 4 to 2^23-1. It would
be possible to remove these restrictions by increasing the size of
SharedInvalidationMessage by 4 bytes, but right now that doesn't seem
like a good trade-off.
Review by Jaime Casanova and Tom Lane.
