durable_rename_excl() attempts to avoid overwriting any existing files
by using link() and unlink(), and it falls back to rename() on some
platforms (aka WIN32), which offers no such overwrite protection. Most
callers use durable_rename_excl() just in case there is an existing
file, but in practice there shouldn't be one (see below for more
details).
Furthermore, failures during durable_rename_excl() can result in
multiple hard links to the same file. As per Nathan's tests, it is
possible to end up with two links to the same file in pg_wal after a
crash just before unlink() during WAL recycling. Specifically, the test
produced links to the same file for the current WAL file and the next
one because the half-recycled WAL file was re-recycled upon restarting,
leading to WAL corruption.
This change replaces all the calls of durable_rename_excl() to
durable_rename(). This removes the protection against accidentally
overwriting an existing file, but some platforms are already living
without it and ordinarily there shouldn't be one. The function itself
is left around in case any extensions are using it. It will be removed
on HEAD via a follow-up commit.
Here is a summary of the existing callers of durable_rename_excl() (see
second discussion link at the bottom), replaced by this commit. First,
basic_archive used it to avoid overwriting an archive concurrently
created by another server, but as mentioned above, it will still
overwrite files on some platforms. Second, xlog.c uses it to recycle
past WAL segments, where an overwrite should not happen (origin of the
change at f0e37a8) because there are protections about the WAL segment
to select when recycling an entry. The third and last area is related
to the write of timeline history files. writeTimeLineHistory() will
write a new timeline history file at the end of recovery on promotion,
so there should be no such files for the same timeline.
What remains is writeTimeLineHistoryFile(), that can be used in parallel
by a WAL receiver and the startup process, and some digging of the
buildfarm shows that EEXIST from a WAL receiver can happen with an error
of "could not link file \"pg_wal/xlogtemp.NN\" to \"pg_wal/MM.history\",
which would cause an automatic restart of the WAL receiver as it is
promoted to FATAL, hence this should improve the stability of the WAL
receiver as rename() would overwrite an existing TLI history file
already fetched by the startup process at recovery.
This is a bug fix, but knowing the unlikeliness of the problem involving
one or more crashes at an exceptionally bad moment, no backpatch is
done. Also, I want to be careful with such changes (aaa3aed did the
opposite of this change by removing HAVE_WORKING_LINK so as Windows
would do a link() rather than a rename() but this was not
concurrent-safe). A backpatch could be revisited in the future. This
is the second time this change is attempted, ccfbd92 being the first
one, but this time no assertions are added for the case of a TLI history
file written concurrently by the WAL receiver or the startup process
because we can expect one to exist (some of the TAP tests are able to
trigger with a proper timing).
Author: Nathan Bossart
Reviewed-by: Robert Haas, Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/20220407182954.GA1231544@nathanxps13
Discussion: https://postgr.es/m/Ym6GZbqQdlalSKSG@paquier.xyz
This reverts commits 2c902bb and ccfbd92. Per buildfarm members
kestrel, rorqual and calliphoridae, the assertions checking that a TLI
history file should not exist when created by a WAL receiver have been
failing, and switching to durable_rename() over durable_rename_excl()
would cause the newest TLI history file to overwrite the existing one.
We need to think harder about such cases, so revert the new logic for
now.
Note that all the failures have been reported in the test
025_stuck_on_old_timeline.
Discussion: https://postgr.es/m/511362.1651116498@sss.pgh.pa.us
durable_rename_excl() attempts to avoid overwriting any existing files
by using link() and unlink(), falling back to rename() on some platforms
(e.g., Windows where link() followed by unlink() is not concurrent-safe,
see 909b449). Most callers of durable_rename_excl() use it just in case
there is an existing file, but it happens that for all of them we never
expect a target file to exist (WAL segment recycling, creation of
timeline history file and basic_archive).
basic_archive used durable_rename_excl() to avoid overwriting an archive
concurrently created by another server. Now, there is a stat() call to
avoid overwriting an existing archive a couple of lines above, so note
that this change opens a small TOCTOU window in this module between the
stat() call and durable_rename().
Furthermore, as mentioned in the top comment of durable_rename_excl(),
this routine can result in multiple hard links to the same file and data
corruption, with two or more links to the same file in pg_wal/ if a
crash happens before the unlink() call during WAL recycling.
Specifically, this would produce links to the same file for the current
WAL file and the next one because the half-recycled WAL file was
re-recycled during crash recovery of a follow-up cluster restart.
This change replaces all calls to durable_rename_excl() with
durable_rename(). This removes the protection against accidentally
overwriting an existing file, but some platforms are already living
without it, and all those code paths never expect an existing file (a
couple of assertions are added to check after that, in case).
This is a bug fix, but knowing the unlikeliness of the problem involving
one of more crashes at an exceptionally bad moment, no backpatch is
done. This could be revisited in the future.
Author: Nathan Bossart
Reviewed-by: Robert Haas, Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/20220407182954.GA1231544@nathanxps13
WAL records may span multiple segments, but XLogWrite() does not
wait for the entire record to be written out to disk before
creating archive status files. Instead, as soon as the last WAL page of
the segment is written, the archive status file is created, and the
archiver may process it. If PostgreSQL crashes before it is able to
write and flush the rest of the record (in the next WAL segment), the
wrong version of the first segment file lingers in the archive, which
causes operations such as point-in-time restores to fail.
To fix this, keep track of records that span across segments and ensure
that segments are only marked ready-for-archival once such records have
been completely written to disk.
This has always been wrong, so backpatch all the way back.
Author: Nathan Bossart <bossartn@amazon.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Ryo Matsumura <matsumura.ryo@fujitsu.com>
Reviewed-by: Andrey Borodin <x4mmm@yandex-team.ru>
Discussion: https://postgr.es/m/CBDDFA01-6E40-46BB-9F98-9340F4379505@amazon.com
TimelineHistoryRead and TimelineHistoryWrite wait events are reported
during waiting for a read and write of a timeline history file, respectively.
However, previously, TimelineHistoryRead wait event was not reported
while readTimeLineHistory() was reading a timeline history file. Also
TimelineHistoryWrite was not reported while writeTimeLineHistory() was
writing one line with the details of the timeline split, at the end.
This commit fixes these issues.
Back-patch to v10 where wait events for a timeline history file was added.
Author: Masahiro Ikeda
Reviewed-by: Michael Paquier, Fujii Masao
Discussion: https://postgr.es/m/d11b0c910b63684424e06772eb844ab5@oss.nttdata.com
The definitions of the routines defined in xlogarchive.c have been part
of xlog_internal.h which is included by several frontend tools, but all
those routines are only called by the backend. More cleanup could be
done within xlog_internal.h, but that's already a nice cut.
This will help a follow-up patch for pg_rewind where handling of
restore_command is added for frontends.
Author: Alexey Kondratov, Michael Paquier
Reviewed-by: Álvaro Herrera, Alexander Korotkov
Discussion: https://postgr.es/m/a3acff50-5a0d-9a2c-b3b2-ee36168955c1@postgrespro.ru
Previously, hard links were not used on Windows and Cygwin, but they
support them just fine in currently supported OS versions, so we can
use them there as well.
Since all supported platforms now support hard links, we can remove
the alternative code paths.
Rename durable_link_or_rename() to durable_rename_excl() to make the
purpose more clear without referencing the implementation details.
Discussion: https://www.postgresql.org/message-id/flat/72fff73f-dc9c-4ef4-83e8-d2e60c98df48%402ndquadrant.com
This fixes two sets of issues related to the use of transient files in
the backend:
1) OpenTransientFile() has been used in some code paths with read-write
flags while read-only is sufficient, so switch those calls to be
read-only where necessary. These have been reported by Joe Conway.
2) When opening transient files, it is up to the caller to close the
file descriptors opened. In error code paths, CloseTransientFile() gets
called to clean up things before issuing an error. However in normal
exit paths, a lot of callers of CloseTransientFile() never actually
reported errors, which could leave a file descriptor open without
knowing about it. This is an issue I complained about a couple of
times, but never had the courage to write and submit a patch, so here we
go.
Note that one frontend code path is impacted by this commit so as an
error is issued when fetching control file data, making backend and
frontend to be treated consistently.
Reported-by: Joe Conway, Michael Paquier
Author: Michael Paquier
Reviewed-by: Álvaro Herrera, Georgios Kokolatos, Joe Conway
Discussion: https://postgr.es/m/20190301023338.GD1348@paquier.xyz
Discussion: https://postgr.es/m/c49b69ec-e2f7-ff33-4f17-0eaa4f2cef27@joeconway.com
On some operating systems, it doesn't make sense to retry fsync(),
because dirty data cached by the kernel may have been dropped on
write-back failure. In that case the only remaining copy of the
data is in the WAL. A subsequent fsync() could appear to succeed,
but not have flushed the data. That means that a future checkpoint
could apparently complete successfully but have lost data.
Therefore, violently prevent any future checkpoint attempts by
panicking on the first fsync() failure. Note that we already
did the same for WAL data; this change extends that behavior to
non-temporary data files.
Provide a GUC data_sync_retry to control this new behavior, for
users of operating systems that don't eject dirty data, and possibly
forensic/testing uses. If it is set to on and the write-back error
was transient, a later checkpoint might genuinely succeed (on a
system that does not throw away buffers on failure); if the error is
permanent, later checkpoints will continue to fail. The GUC defaults
to off, meaning that we panic.
Back-patch to all supported releases.
There is still a narrow window for error-loss on some operating
systems: if the file is closed and later reopened and a write-back
error occurs in the intervening time, but the inode has the bad
luck to be evicted due to memory pressure before we reopen, we could
miss the error. A later patch will address that with a scheme
for keeping files with dirty data open at all times, but we judge
that to be too complicated to back-patch.
Author: Craig Ringer, with some adjustments by Thomas Munro
Reported-by: Craig Ringer
Reviewed-by: Robert Haas, Thomas Munro, Andres Freund
Discussion: https://postgr.es/m/20180427222842.in2e4mibx45zdth5%40alap3.anarazel.de
The file handling functions from fd.c were called with a diverse mix of
notations for the file permissions when they were opening new files.
Almost all files created by the server should have the same permissions
set. So change the API so that e.g. OpenTransientFile() automatically
uses the standard permissions set, and OpenTransientFilePerm() is a new
function that takes an explicit permissions set for the few cases where
it is needed. This also saves an unnecessary argument for call sites
that are just opening an existing file.
While we're reviewing these APIs, get rid of the FileName typedef and
use the standard const char * for the file name and mode_t for the file
mode. This makes these functions match other file handling functions
and removes an unnecessary layer of mysteriousness. We can also get rid
of a few casts that way.
Author: David Steele <david@pgmasters.net>
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Previous commits, notably 53be0b1add and
6f3bd98ebf, made it possible to see from
pg_stat_activity when a backend was stuck waiting for another backend,
but it's also fairly common for a backend to be stuck waiting for an
I/O. Add wait events for those operations, too.
Rushabh Lathia, with further hacking by me. Reviewed and tested by
Michael Paquier, Amit Kapila, Rajkumar Raghuwanshi, and Rahila Syed.
Discussion: http://postgr.es/m/CAGPqQf0LsYHXREPAZqYGVkDqHSyjf=KsD=k0GTVPAuzyThh-VQ@mail.gmail.com
c.h #includes a number of core libc header files, such as <stdio.h>.
There's no point in re-including these after having read postgres.h,
postgres_fe.h, or c.h; so remove code that did so.
While at it, also fix some places that were ignoring our standard pattern
of "include postgres[_fe].h, then system header files, then other Postgres
header files". While there's not any great magic in doing it that way
rather than system headers last, it's silly to have just a few files
deviating from the general pattern. (But I didn't attempt to enforce this
globally, only in files I was touching anyway.)
I'd be the first to say that this is mostly compulsive neatnik-ism,
but over time it might save enough compile cycles to be useful.
"xlog" is not a particularly clear abbreviation for "write-ahead log",
and it sometimes confuses users into believe that the contents of the
"pg_xlog" directory are not critical data, leading to unpleasant
consequences. So, rename the directory to "pg_wal".
This patch modifies pg_upgrade and pg_basebackup to understand both
the old and new directory layouts; the former is necessary given the
purpose of the tool, while the latter merely avoids an unnecessary
backward-compatibility break.
We may wish to consider renaming other programs, switches, and
functions which still use the old "xlog" naming to also refer to
"wal". However, that's still under discussion, so let's do just this
much for now.
Discussion: CAB7nPqTeC-8+zux8_-4ZD46V7YPwooeFxgndfsq5Rg8ibLVm1A@mail.gmail.com
Michael Paquier
Renaming a file using rename(2) is not guaranteed to be durable in face
of crashes. Use the previously added durable_rename()/durable_link_or_rename()
in various places where we previously just renamed files.
Most of the changed call sites are arguably not critical, but it seems
better to err on the side of too much durability. The most prominent
known case where the previously missing fsyncs could cause data loss is
crashes at the end of a checkpoint. After the actual checkpoint has been
performed, old WAL files are recycled. When they're filled, their
contents are fdatasynced, but we did not fsync the containing
directory. An OS/hardware crash in an unfortunate moment could then end
up leaving that file with its old name, but new content; WAL replay
would thus not replay it.
Reported-By: Tomas Vondra
Author: Michael Paquier, Tomas Vondra, Andres Freund
Discussion: 56583BDD.9060302@2ndquadrant.com
Backpatch: All supported branches
Previously .ready file was created for the timeline history file at the end
of an archive recovery even when WAL archiving was not enabled.
This creation is unnecessary and causes .ready file to remain infinitely.
This commit changes an archive recovery so that it creates .ready file for
the timeline history file only when WAL archiving is enabled.
Backpatch to all supported versions.
If we were about to enter archive recovery after crash recovery, we scanned
the archive for the latest tli history file, and set the recovery target
timeline to that. However, when we actually tried to read the history file,
we would not fetch the file from the archive, because we were not in archive
recovery yet.
To fix, make readTimeLineHistory and existsTimeLineHistory to always fetch
the file from archive if archive recovery is requested, even if we're not in
archive recovery yet.
Backpatch to 9.2. Mitsumasa KONDO
When a standby server follows the master using WAL archive, and it chooses
a new timeline (recovery_target_timeline='latest'), it only fetches the
timeline history file for the chosen target timeline, not any other history
files that might be missing from pg_xlog. For example, if the current
timeline is 2, and we choose 4 as the new recovery target timeline, the
history file for timeline 3 is not fetched, even if it's part of this
server's history. That's enough for the standby itself - the history file
for timeline 4 includes timeline 3 as well - but if a cascading standby
server wants to recover to timeline 3, it needs the history file. To fix,
when a new recovery target timeline is chosen, try to copy any missing
history files from the archive to pg_xlog between the old and new target
timeline.
A second similar issue was with the WAL files. When a standby recovers from
archive, and it reaches a segment that contains a switch to a new timeline,
recovery fetches only the WAL file labelled with the new timeline's ID. The
file from the new timeline contains a copy of the WAL from the old timeline
up to the point where the switch happened, and recovery recovers it from the
new file. But in streaming replication, walsender only tries to read it
from the old timeline's file. To fix, change walsender to read it from the
new file, so that it behaves the same as recovery in that sense, and doesn't
try to open the possibly nonexistent file with the old timeline's ID.
This mirrors the changes done earlier to the server in standby mode. When
receivelog reaches the end of a timeline, as reported by the server, it
fetches the timeline history file of the next timeline, and restarts
streaming from the new timeline by issuing a new START_STREAMING command.
When pg_receivexlog crosses a timeline, it leaves the .partial suffix on the
last segment on the old timeline. This helps you to tell apart a partial
segment left in the directory because of a timeline switch, and a completed
segment. If you just follow a single server, it won't make a difference, but
it can be significant in more complicated scenarios where new WAL is still
generated on the old timeline.
This includes two small changes to the streaming replication protocol:
First, when you reach the end of timeline while streaming, the server now
sends the TLI of the next timeline in the server's history to the client.
pg_receivexlog uses that as the next timeline, so that it doesn't need to
parse the timeline history file like a standby server does. Second, when
BASE_BACKUP command sends the begin and end WAL positions, it now also sends
the timeline IDs corresponding the positions.
The cascading standby patch in 9.2 changed the way WAL files are treated
when restored from the archive. Before, they were restored under a temporary
filename, and not kept in pg_xlog, but after the patch, they were copied
under pg_xlog. This is necessary for a cascading standby to find them, but
it also means that if the archive goes offline and a standby is restarted,
it can recover back to where it was using the files in pg_xlog. It also
means that if you take an offline backup from a standby server, it includes
all the required WAL files in pg_xlog.
However, the same change was not made to timeline history files, so if the
WAL segment containing the checkpoint record contains a timeline switch, you
will still get an error if you try to restart recovery without the archive,
or recover from an offline backup taken from the standby.
With this patch, timeline history files restored from archive are copied
into pg_xlog like WAL files are, so that pg_xlog contains all the files
required to recover. This is a corner-case pre-existing issue in 9.2, but
even more important in master where it's possible for a standby to follow a
timeline switch through streaming replication. To make that possible, the
timeline history files must be present in pg_xlog.
This gets rid of XLByteLT, XLByteLE, XLByteEQ and XLByteAdvance.
These were useful for brevity when XLogRecPtrs were split in
xlogid/xrecoff; but now that they are simple uint64's, they are just
clutter. The only downside to making this change would be ease of
backporting patches, but that has been negated by other substantive
changes to the involved code anyway. The clarity of simpler expressions
makes the change worthwhile.
Most of the changes are mechanical, but in a couple of places, the patch
author chose to invert the operator sense, making the code flow more
logical (and more in line with preceding comments).
Author: Andres Freund
Eyeballed by Dimitri Fontaine and Alvaro Herrera
Before this patch, streaming replication would refuse to start replicating
if the timeline in the primary doesn't exactly match the standby. The
situation where it doesn't match is when you have a master, and two
standbys, and you promote one of the standbys to become new master.
Promoting bumps up the timeline ID, and after that bump, the other standby
would refuse to continue.
There's significantly more timeline related logic in streaming replication
now. First of all, when a standby connects to primary, it will ask the
primary for any timeline history files that are missing from the standby.
The missing files are sent using a new replication command TIMELINE_HISTORY,
and stored in standby's pg_xlog directory. Using the timeline history files,
the standby can follow the latest timeline present in the primary
(recovery_target_timeline='latest'), just as it can follow new timelines
appearing in an archive directory.
START_REPLICATION now takes a TIMELINE parameter, to specify exactly which
timeline to stream WAL from. This allows the standby to request the primary
to send over WAL that precedes the promotion. The replication protocol is
changed slightly (in a backwards-compatible way although there's little hope
of streaming replication working across major versions anyway), to allow
replication to stop when the end of timeline reached, putting the walsender
back into accepting a replication command.
Many thanks to Amit Kapila for testing and reviewing various versions of
this patch.
This allows us to do some more rigorous sanity checking for various
incorrect point-in-time recovery scenarios, and provides more information
for debugging purposes. It will also come handy in the upcoming patch to
allow timeline switches to be replicated by streaming replication.
Files opened with BasicOpenFile or PathNameOpenFile are not automatically
cleaned up on error. That puts unnecessary burden on callers that only want
to keep the file open for a short time. There is AllocateFile, but that
returns a buffered FILE * stream, which in many cases is not the nicest API
to work with. So add function called OpenTransientFile, which returns a
unbuffered fd that's cleaned up like the FILE* returned by AllocateFile().
This plugs a few rare fd leaks in error cases:
1. copy_file() - fixed by by using OpenTransientFile instead of BasicOpenFile
2. XLogFileInit() - fixed by adding close() calls to the error cases. Can't
use OpenTransientFile here because the fd is supposed to persist over
transaction boundaries.
3. lo_import/lo_export - fixed by using OpenTransientFile instead of
PathNameOpenFile.
In addition to plugging those leaks, this replaces many BasicOpenFile() calls
with OpenTransientFile() that were not leaking, because the code meticulously
closed the file on error. That wasn't strictly necessary, but IMHO it's good
for robustness.
The same leaks exist in older versions, but given the rarity of the issues,
I'm not backpatching this. Not yet, anyway - it might be good to backpatch
later, after this mechanism has had some more testing in master branch.
When I moved ExecuteRecoveryCommand() from xlog.c to xlogarchive.c, I didn't
realize that it's called from the checkpoint process, not the startup
process. I tried to use InRedo variable to decide whether or not to attempt
cleaning up the archive (must not do so before we have read the initial
checkpoint record), but that variable is only valid within the startup
process.
Instead, let ExecuteRecoveryCommand() always clean up the archive, and add
an explicit argument to RestoreArchivedFile() to say whether that's allowed
or not. The caller knows better.
Reported by Erik Rijkers, diagnosis by Fujii Masao. Only 9.3devel is
affected.
This is just refactoring, to make the functions accessible outside xlog.c.
A followup patch will make use of that, to allow fetching timeline history
files over streaming replication.
Bruce Momjian
Michael Paquier
Alvaro Herrera
Peter Eisentraut
Fujii Masao
Thomas Munro
Peter Eisentraut
Tom Lane
Robert Haas
Andres Freund
Heikki Linnakangas