Commits cf112c12 and a0dc8271 were a little too hasty in getting rid of
the pg_ prefixes where we use pread(), pwrite() and vectored variants.
We dropped support for ancient Unixes where we needed to use lseek() to
implement replacements for those, but it turns out that Windows also
changes the current position even when you pass in an offset to
ReadFile() and WriteFile() if the file handle is synchronous, despite
its documentation saying otherwise.
Switching to asynchronous file handles would fix that, but have other
complications. For now let's just put back the pg_ prefix and add some
comments to highlight the non-standard side-effect, which we can now
describe as Windows-only.
Reported-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/20220923202439.GA1156054%40nathanxps13
There are still some alignment-related failures in the buildfarm,
which might or might not be able to be fixed quickly, but I've also
just realized that it increased the size of many WAL records by 4 bytes
because a block reference contains a RelFileLocator. The effect of that
hasn't been studied or discussed, so revert for now.
RelFileNumbers are now assigned using a separate counter, instead of
being assigned from the OID counter. This counter never wraps around:
if all 2^56 possible RelFileNumbers are used, an internal error
occurs. As the cluster is limited to 2^64 total bytes of WAL, this
limitation should not cause a problem in practice.
If the counter were 64 bits wide rather than 56 bits wide, we would
need to increase the width of the BufferTag, which might adversely
impact buffer lookup performance. Also, this lets us use bigint for
pg_class.relfilenode and other places where these values are exposed
at the SQL level without worrying about overflow.
This should remove the need to keep "tombstone" files around until
the next checkpoint when relations are removed. We do that to keep
RelFileNumbers from being recycled, but now that won't happen
anyway. However, this patch doesn't actually change anything in
this area; it just makes it possible for a future patch to do so.
Dilip Kumar, based on an idea from Andres Freund, who also reviewed
some earlier versions of the patch. Further review and some
wordsmithing by me. Also reviewed at various points by Ashutosh
Sharma, Vignesh C, Amul Sul, Álvaro Herrera, and Tom Lane.
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
Autoconf is showing its age, fewer and fewer contributors know how to wrangle
it. Recursive make has a lot of hard to resolve dependency issues and slow
incremental rebuilds. Our home-grown MSVC build system is hard to maintain for
developers not using Windows and runs tests serially. While these and other
issues could individually be addressed with incremental improvements, together
they seem best addressed by moving to a more modern build system.
After evaluating different build system choices, we chose to use meson, to a
good degree based on the adoption by other open source projects.
We decided that it's more realistic to commit a relatively early version of
the new build system and mature it in tree.
This commit adds an initial version of a meson based build system. It supports
building postgres on at least AIX, FreeBSD, Linux, macOS, NetBSD, OpenBSD,
Solaris and Windows (however only gcc is supported on aix, solaris). For
Windows/MSVC postgres can now be built with ninja (faster, particularly for
incremental builds) and msbuild (supporting the visual studio GUI, but
building slower).
Several aspects (e.g. Windows rc file generation, PGXS compatibility, LLVM
bitcode generation, documentation adjustments) are done in subsequent commits
requiring further review. Other aspects (e.g. not installing test-only
extensions) are not yet addressed.
When building on Windows with msbuild, builds are slower when using a visual
studio version older than 2019, because those versions do not support
MultiToolTask, required by meson for intra-target parallelism.
The plan is to remove the MSVC specific build system in src/tools/msvc soon
after reaching feature parity. However, we're not planning to remove the
autoconf/make build system in the near future. Likely we're going to keep at
least the parts required for PGXS to keep working around until all supported
versions build with meson.
Some initial help for postgres developers is at
https://wiki.postgresql.org/wiki/Meson
With contributions from Thomas Munro, John Naylor, Stone Tickle and others.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Author: Peter Eisentraut <peter@eisentraut.org>
Reviewed-By: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20211012083721.hvixq4pnh2pixr3j@alap3.anarazel.de
This commit updates two code paths to use pg_lfind32() introduced by
b6ef167 with TransactionId arrays:
- At the end of TransactionIdIsInProgress(), when checking for the case
of still running but overflowed subxids.
- XidIsConcurrent(), when checking for a serializable conflict.
These cases are less impactful than 37a6e5d, but a bit of
micro-benchmarking of this API shows that linear search speeds up by
~20% depending on the number of items involved (x86_64 and amd64 looked
at here).
Author: Nathan Bossart
Reviewed-by: Richard Guo, Michael Paquier
Discussion: https://postgr.es/m/20220901185153.GA783106@nathanxps13
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in storage, catalog,
access method, executor, and logical replication code, as well as in
miscellaneous utility/library code.
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy. Later commits will do the
same for other parts of the codebase.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
Various bits of code were declaring signal handlers manually,
using "int signum" or variants of that. We evidently have no
platforms where that's actually wrong, but let's use our
SIGNAL_ARGS macro everywhere anyway. If nothing else, it's
good for finding signal handlers easily.
No need for back-patch, since this is just cosmetic AFAICS.
Discussion: https://postgr.es/m/2684964.1663167995@sss.pgh.pa.us
guc.c has grown to be one of our largest .c files, making it
a bottleneck for compilation. It's also acquired a bunch of
knowledge that'd be better kept elsewhere, because of our not
very good habit of putting variable-specific check hooks here.
Hence, split it up along these lines:
* guc.c itself retains just the core GUC housekeeping mechanisms.
* New file guc_funcs.c contains the SET/SHOW interfaces and some
SQL-accessible functions for GUC manipulation.
* New file guc_tables.c contains the data arrays that define the
built-in GUC variables, along with some already-exported constant
tables.
* GUC check/assign/show hook functions are moved to the variable's
home module, whenever that's clearly identifiable. A few hard-
to-classify hooks ended up in commands/variable.c, which was
already a home for miscellaneous GUC hook functions.
To avoid cluttering a lot more header files with #include "guc.h",
I also invented a new header file utils/guc_hooks.h and put all
the GUC hook functions' declarations there, regardless of their
originating module. That allowed removal of #include "guc.h"
from some existing headers. The fallout from that (hopefully
all caught here) demonstrates clearly why such inclusions are
best minimized: there are a lot of files that, for example,
were getting array.h at two or more levels of remove, despite
not having any connection at all to GUCs in themselves.
There is some very minor code beautification here, such as
renaming a couple of inconsistently-named hook functions
and improving some comments. But mostly this just moves
code from point A to point B and deals with the ensuing
needs for #include adjustments and exporting a few functions
that previously weren't exported.
Patch by me, per a suggestion from Andres Freund; thanks also
to Michael Paquier for the idea to invent guc_funcs.c.
Discussion: https://postgr.es/m/587607.1662836699@sss.pgh.pa.us
Several backend-side loops scanning one or more directories with
ReadDir() (WAL segment recycle/removal in xlog.c, backend-side directory
copy, temporary file removal, configuration file parsing, some logical
decoding logic and some pgtz stuff) already know the type of the entry
being scanned thanks to the dirent structure associated to the entry, on
platforms where we know about DT_REG, DT_DIR and DT_LNK to make the
difference between a regular file, a directory and a symbolic link.
Relying on the direct structure of an entry saves a few system calls to
stat() and lstat() in the loops updated here, shaving some code while on
it. The logic of the code remains the same, calling stat() or lstat()
depending on if it is necessary to look through symlinks.
Authors: Nathan Bossart, Bharath Rupireddy
Reviewed-by: Andres Freund, Thomas Munro, Michael Paquier
Discussion: https://postgr.es/m/CALj2ACV8n-J-f=yiLUOx2=HrQGPSOZM3nWzyQQvLPcccPXxEdg@mail.gmail.com
More than twenty years ago (79fcde48b), we hacked the postmaster
to avoid a core-dump on systems that didn't support fflush(NULL).
We've mostly, though not completely, hewed to that rule ever since.
But such systems are surely gone in the wild, so in the spirit of
cleaning out no-longer-needed portability hacks let's get rid of
multiple per-file fflush() calls in favor of using fflush(NULL).
Also, we were fairly inconsistent about whether to fflush() before
popen() and system() calls. While we've received no bug reports
about that, it seems likely that at least some of these call sites
are at risk of odd behavior, such as error messages appearing in
an unexpected order. Rather than expend a lot of brain cells
figuring out which places are at hazard, let's just establish a
uniform coding rule that we should fflush(NULL) before these calls.
A no-op fflush() is surely of trivial cost compared to launching
a sub-process via a shell; while if it's not a no-op then we likely
need it.
Discussion: https://postgr.es/m/2923412.1661722825@sss.pgh.pa.us
This is preparatory work for a project to increase the number of bits
in a RelFileNumber from 32 to 56.
Along the way, introduce static inline accessor functions for a couple
of BufferTag fields.
Dilip Kumar, reviewed by me. The overall patch series has also had
review at various times from Andres Freund, Ashutosh Sharma, Hannu
Krosing, Vignesh C, Álvaro Herrera, and Tom Lane.
Discussion: http://postgr.es/m/CAFiTN-trubju5YbWAq-BSpZ90-Z6xCVBQE8BVqXqANOZAF1Znw@mail.gmail.com
In a similar effort to f01592f91, here we're targetting fixing the
warnings that -Wshadow=compatible-local produces that we can fix by moving
a variable to an inner scope to stop that variable from being shadowed by
another variable declared somewhere later in the function.
All of the warnings being fixed here are changing the scope of variables
which are being used as an iterator for a "for" loop. In each instance,
the fix happens to be changing the for loop to use the C99 type
initialization. Much of this code likely pre-dates our use of C99.
Reducing the scope of the outer scoped variable seems like the safest way
to fix these. Renaming seems more likely to risk patches using the wrong
variable. Reducing the scope is more likely to result in a compilation
failure after applying some future patch rather than introducing bugs with
it.
By my count, this takes the warning count from 129 down to 114.
Author: Justin Pryzby
Discussion: https://postgr.es/m/CAApHDvrwLGBP%2BYw9vriayyf%3DXR4uPWP5jr6cQhP9au_kaDUhbA%40mail.gmail.com
The standard way to check for list emptiness is to compare the
List pointer to NIL; our list code goes out of its way to ensure
that that is the only representation of an empty list. (An
acceptable alternative is a plain boolean test for non-null
pointer, but explicit mention of NIL is usually preferable.)
Various places didn't get that memo and expressed the condition
with list_length(), which might not be so bad except that there
were such a variety of ways to check it exactly: equal to zero,
less than or equal to zero, less than one, yadda yadda. In the
name of code readability, let's standardize all those spellings
as "list == NIL" or "list != NIL". (There's probably some
microscopic efficiency gain too, though few of these look to be
at all performance-critical.)
A very small number of cases were left as-is because they seemed
more consistent with other adjacent list_length tests that way.
Peter Smith, with bikeshedding from a number of us
Discussion: https://postgr.es/m/CAHut+PtQYe+ENX5KrONMfugf0q6NHg4hR5dAhqEXEc2eefFeig@mail.gmail.com
<sys/resource.h> is in SUSv2 and is on all targeted Unix systems. We
have a replacement for getrusage() on Windows, so let's just move its
declarations into src/include/port/win32/sys/resource.h so that we can
use a standard-looking #include. Also remove an obsolete reference to
CLK_TCK. Also rename src/port/getrusage.c to win32getrusage.c,
following the convention for Windows-only fallback code.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKG%2BL_3brvh%3D8e0BW_VfX9h7MtwgN%3DnFHP5o7X2oZucY9dg%40mail.gmail.com
If an error occurs before we close the fake relcache entry, the the
fake relcache entry will be destroyed by the SmgrRelation will
survive until end of transaction. Its smgr_owner pointer ends up
pointing to already-freed memory.
The original reason for using a fake relcache entry here was to try
to avoid reusing an SMgrRelation across a relevant invalidation. To
avoid that problem, just call smgropen() again each time we need a
reference to it. Hopefully someday we will come up with a more
elegant approach, but accessing uninitialized memory is bad so let's
do this for now.
Dilip Kumar, reviewed by Andres Freund and Tom Lane. Report by
Justin Pryzby.
Discussion: http://postgr.es/m/20220802175043.GA13682@telsasoft.com
Discussion: http://postgr.es/m/CAFiTN-vSFeE6_W9z698XNtFROOA_nSqUXWqLcG0emob_kJ+dEQ@mail.gmail.com
Previously we fell back to __FUNCTION__ and then NULL. As __func__ is in C99
that shouldn't be necessary anymore.
Solution.pm defined HAVE_FUNCNAME__FUNCTION instead of
HAVE_FUNCNAME__FUNC (originating in 4164e6636e), as at some point in the past
MSVC only supported __FUNCTION__. Our minimum version supports __func__.
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20220807012914.ydz73yte6j3coulo@awork3.anarazel.de
RelationCopyStorageUsingBuffer thought it could skip copying
empty pages, but of course that does not work at all, because
subsequent blocks will be out of place.
Also fix it to acquire share lock on the source buffer. It *might*
be safe to not do that, but it's not very certain, and I don't think
this code deserves any benefit of the doubt.
Dilip Kumar, per complaint from me
Discussion: https://postgr.es/m/3679800.1659654066@sss.pgh.pa.us
Now that lstat() reports junction points with S_IFLNK/S_ISLINK(), and
unlink() can unlink them, there is no need for conditional code for
Windows in a few places. That was expressed by testing for WIN32 or
S_ISLNK, which we can now constant-fold.
The coding around pgwin32_is_junction() was a bit suspect anyway, as we
never checked for errors, and we also know that errors can be spuriously
reported because of transient sharing violations on this OS. The
lstat()-based code has handling for that.
This also reverts 4fc6b6ee on master only. That was done because
lstat() didn't previously work for symlinks (junction points), but now
it does.
Tested-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/CA%2BhUKGLfOOeyZpm5ByVcAt7x5Pn-%3DxGRNCvgiUPVVzjFLtnY0w%40mail.gmail.com
preadv() and pwritev() are not standardized by POSIX, but appeared in
NetBSD in 1999 and were adopted by at least OpenBSD, FreeBSD,
DragonFlyBSD, Linux, AIX, illumos and macOS. We don't use them much
yet, but an active proposal uses them heavily.
In 15, we had two replacement implementations for other OSes: one based
on lseek() + -v function if available for true vector I/O, and the other
based on a loop over p- function.
The former would be an obstacle to hypothetical future multi-threaded
code sharing file descriptors, while the latter would not, since commit
cf112c12. Furthermore, the number of targeted systems that could
benefit from the former's potential upside has dwindled to just one
niche OS, since macOS added the functions and we de-supported HP-UX.
That doesn't seem like a good trade-off.
Therefore, drop the lseek()-based variant, and also the pg_ prefix now
that the file position portability hazard is gone.
At the time of writing, the only systems in our build farm that lack
native preadv/pwritev and thus use fallback code are:
* Solaris (but not illumos)
* macOS before release 11.0
* Windows
With this commit, the above systems will now use the *same* fallback
code, the version that loops over pread()/pwrite(). Windows already
used that (though a later proposal may include true vector I/O for
Windows), so this decision really only affects Solaris, until it gets
around to adding these system calls.
Also remove some useless includes while here.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ3LHeP9w5Fgzdr4G8AnEtJ=z=p6hGDEm4qYGEUX5B6fQ@mail.gmail.com
pread() and pwrite() are in SUSv2, and all targeted Unix systems have
them.
Previously, we defined pg_pread and pg_pwrite to emulate these function
with lseek() on old Unixen. The names with a pg_ prefix were a reminder
of a portability hazard: they might change the current file position.
That hazard is gone, so we can drop the prefixes.
Since the remaining replacement code is Windows-only, move it into
src/port/win32p{read,write}.c, and move the declarations into
src/include/port/win32_port.h.
No need for vestigial HAVE_PREAD, HAVE_PWRITE macros as they were only
used for declarations in port.h which have now moved into win32_port.h.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Greg Stark <stark@mit.edu>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ3LHeP9w5Fgzdr4G8AnEtJ=z=p6hGDEm4qYGEUX5B6fQ@mail.gmail.com
getrlimit() is in SUSv2 and all targeted systems have it.
Windows doesn't have it. We could just use #ifndef WIN32, but for a
little more explanation about why we're making things conditional, let's
retain the HAVE_GETRLIMIT macro. It's defined in port.h for Unix systems.
On systems that have it, it's not necessary to test for RLIMIT_CORE,
RLIMIT_STACK or RLIMIT_NOFILE macros, since SUSv2 requires those and all
targeted systems have them. Also remove references to a pre-historic
alternative spelling of RLIMIT_NOFILE, and coding that seemed to believe
that Cygwin didn't have it.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ3LHeP9w5Fgzdr4G8AnEtJ=z=p6hGDEm4qYGEUX5B6fQ@mail.gmail.com
Commit 9a974cbcba arranged to preserve
the relfilenode of user tables across pg_upgrade, but failed to notice
that pg_upgrade treats pg_largeobject as a user table and thus it needs
the same treatment. Otherwise, large objects will appear to vanish
after a pg_upgrade.
Commit d498e052b4 fixed this problem
by teaching pg_dump to UPDATE pg_class.relfilenode for pg_largeobject
and its index. However, because an UPDATE on the catalog rows doesn't
change anything on disk, this can leave stray files behind in the new
cluster. They will normally be empty, but it's a little bit untidy.
Hence, this commit arranges to do the same thing using DDL. Specifically,
it makes TRUNCATE work for the pg_largeobject catalog when in
binary-upgrade mode, and it then uses that command in binary-upgrade
dumps as a way of setting pg_class.relfilenode for pg_largeobject and
its index. That way, the old files are removed from the new cluster.
Discussion: http://postgr.es/m/CA+TgmoYYMXGUJO5GZk1-MByJGu_bB8CbOL6GJQC8=Bzt6x6vDg@mail.gmail.com
Commit b0a55e4329 missed a few places
where we are referring to the number used as a part of the relation
filename as an "OID". We now want to call that a "RelFileNumber".
Some of these places actually made it sound like the OID in question
is pg_class.oid rather than pg_class.relfilenode, which is especially
good to clean up.
Dilip Kumar with some editing by me.
It incorrectly used GetBufferDescriptor instead of
GetLocalBufferDescriptor, causing it to not find the correct buffer in
most cases, and performing an out-of-bounds memory read in the corner
case that temp_buffers > shared_buffers.
It also bumped the usage-count on the buffer, even if it was
previously pinned. That won't lead to crashes or incorrect results,
but it's different from what the shared-buffer case does, and
different from the usual code in LocalBufferAlloc. Fix that too, and
make the code ordering match LocalBufferAlloc() more closely, so that
it's easier to verify that it's doing the same thing.
Currently, ReadRecentBuffer() is only used with non-temp relations, in
WAL redo, so the broken code is currently dead code. However, it could
be used by extensions.
Backpatch-through: 14
Discussion: https://www.postgresql.org/message-id/2d74b46f-27c9-fb31-7f99-327a87184cc0%40iki.fi
Reviewed-by: Thomas Munro, Zhang Mingli, Richard Guo
This is in preparation for building postgres with meson / ninja.
When building with meson, commands are run at the root of the build tree. Add
an option to put build output into the appropriate place. This can be utilized
by src/tools/msvc/ for a minor simplification, which also provides some
coverage for the new option.
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/5e216522-ba3c-f0e6-7f97-5276d0270029@enterprisedb.com
Commit 4518c798 blocks signals for a short region of code, but it
assumed that whatever called it had the signal mask set to UnBlockSig on
entry. That may be true today (or may even not be, in extensions in the
wild), but it would be better not to make that assumption. We should
save-and-restore the caller's signal mask.
The PG_SETMASK() portability macro couldn't be used for that, which is
why it wasn't done before. But... considering that commit a65e0864
established back in 9.6 that supported POSIX systems have sigprocmask(),
and that this is POSIX-only code, there is no reason not to use standard
sigprocmask() directly to achieve that.
Back-patch to all supported releases, like 4518c798 and 80845b7c.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKGKx6Biq7_UuV0kn9DW%2B8QWcpJC1qwhizdtD9tN-fn0H0g%40mail.gmail.com
Previously we displayed "DSMFillZeroWrite" while in posix_fallocate(),
because we shared the same wait event for "mmap" and "posix" DSM types.
Let's introduce a new wait event "DSMAllocate", to be more accurate.
Reported-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220711174518.yldckniicknsxgzl%40awork3.anarazel.de
In early releases of the DSM infrastructure, it was possible to resize
segments. That was removed in release 12 by commit 3c60d0fa. Now the
ftruncate() + posix_fallocate() sequence during DSM segment creation has
a redundant step: we're always extending from zero to the desired size,
so we might as well just call posix_fallocate().
Let's also include the remaining ftruncate() call (non-Linux POSIX
systems) in the wait event reporting, for good measure.
Discussion: https://postgr.es/m/CA%2BhUKGJSm-nq8s%2B_59zb7NbFQF-OS%3DxTnTAiGLrQpuSmU2y_1A%40mail.gmail.com
On Linux, we call posix_fallocate() on shm_open()'d memory to avoid
later potential SIGBUS (see commit 899bd785).
Based on field reports of systems stuck in an EINTR retry loop there,
there, we made it possible to break out of that loop via slightly odd
coding where the CHECK_FOR_INTERRUPTS() call was somewhat removed from
the loop (see commit 422952ee).
On further reflection, that was not a great choice for at least two
reasons:
1. If interrupts were held, the CHECK_FOR_INTERRUPTS() would do nothing
and the EINTR error would be surfaced to the user.
2. If EINTR was reported but neither QueryCancelPending nor
ProcDiePending was set, then we'd dutifully retry, but with a bit more
understanding of how posix_fallocate() works, it's now clear that you
can get into a loop that never terminates. posix_fallocate() is not a
function that can do some of the job and tell you about progress if it's
interrupted, it has to undo what it's done so far and report EINTR, and
if signals keep arriving faster than it can complete (cf recovery
conflict signals), you're stuck.
Therefore, for now, we'll simply block most signals to guarantee
progress. SIGQUIT is not blocked (see InitPostmasterChild()), because
its expected handler doesn't return, and unblockable signals like
SIGCONT are not expected to arrive at a high rate. For good measure,
we'll include the ftruncate() call in the blocked region, and add a
retry loop.
Back-patch to all supported releases.
Reported-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Nicola Contu <nicola.contu@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220701154105.jjfutmngoedgiad3%40alvherre.pgsql
Further to commit 92d70b77, let's drop the code we carry for the
following untested architectures: M68K, M88K, M32R, SuperH. We have no
idea if anything actually works there, and surely as vintage hardware
and microcontrollers they would be underpowered for modern purposes.
We could always consider re-adding SuperH based on evidence of usage and
build farm support, if someone shows up to provide it.
While here, SPARC is usually written in all caps.
Suggested-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Robert Haas <robertmhaas@gmail.com> (the idea, not the patch)
Discussion: https://postgr.es/m/959917.1657522169%40sss.pgh.pa.us
Remove PageIsValid() and PageSizeIsValid(), which weren't used and
seem unnecessary.
Some code using these formerly-macros needs some adjustments because
it was previously playing loose with the Page vs. PageHeader types,
which is no longer possible with the functions instead of macros.
Reviewed-by: Amul Sul <sulamul@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/5b558da8-99fb-0a99-83dd-f72f05388517%40enterprisedb.com
dshash.c previously maintained flags to be able to assert that you
didn't hold any partition lock. These flags could get out of sync with
reality in error scenarios.
Get rid of all that, and make assertions about the locks themselves
instead. Since LWLockHeldByMe() loops internally, we don't want to put
that inside another loop over all partition locks. Introduce a new
debugging-only interface LWLockAnyHeldByMe() to avoid that.
This problem was noted by Tom and Andres while reviewing changes to
support the new shared memory stats system, and later showed up in
reality while working on commit 389869af.
Back-patch to 11, where dshash.c arrived.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Reported-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Kyotaro HORIGUCHI <horiguchi.kyotaro@lab.ntt.co.jp>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220311012712.botrpsikaufzteyt@alap3.anarazel.de
Discussion: https://postgr.es/m/CA%2BhUKGJ31Wce6HJ7xnVTKWjFUWQZPBngxfJVx4q0E98pDr3kAw%40mail.gmail.com
We have been using the term RelFileNode to refer to either (1) the
integer that is used to name the sequence of files for a certain relation
within the directory set aside for that tablespace/database combination;
or (2) that value plus the OIDs of the tablespace and database; or
occasionally (3) the whole series of files created for a relation
based on those values. Using the same name for more than one thing is
confusing.
Replace RelFileNode with RelFileNumber when we're talking about just the
single number, i.e. (1) from above, and with RelFileLocator when we're
talking about all the things that are needed to locate a relation's files
on disk, i.e. (2) from above. In the places where we refer to (3) as
a relfilenode, instead refer to "relation storage".
Since there is a ton of SQL code in the world that knows about
pg_class.relfilenode, don't change the name of that column, or of other
SQL-facing things that derive their name from it.
On the other hand, do adjust closely-related internal terminology. For
example, the structure member names dbNode and spcNode appear to be
derived from the fact that the structure itself was called RelFileNode,
so change those to dbOid and spcOid. Likewise, various variables with
names like rnode and relnode get renamed appropriately, according to
how they're being used in context.
Hopefully, this is clearer than before. It is also preparation for
future patches that intend to widen the relfilenumber fields from its
current width of 32 bits. Variables that store a relfilenumber are now
declared as type RelFileNumber rather than type Oid; right now, these
are the same, but that can now more easily be changed.
Dilip Kumar, per an idea from me. Reviewed also by Andres Freund.
I fixed some whitespace issues, changed a couple of words in a
comment, and made one other minor correction.
Discussion: http://postgr.es/m/CA+TgmoamOtXbVAQf9hWFzonUo6bhhjS6toZQd7HZ-pmojtAmag@mail.gmail.com
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
Discussion: http://postgr.es/m/CAFiTN-vTe79M8uDH1yprOU64MNFE+R3ODRuA+JWf27JbhY4hJw@mail.gmail.com
This reverts most of 91c0570a79, f28bf667f6, fe0972ee5e, afdeff1052. The
only thing left is the retry loop in 019_replslot_limit.pl that avoids
spurious failures by retrying a couple times.
We haven't seen any hard evidence that this is caused by anything but slow
process shutdown. We did not find any cases where walsenders did not vanish
after waiting for longer. Therefore there's no reason for this debugging code
to remain.
Discussion: https://postgr.es/m/20220530190155.47wr3x2prdwyciah@alap3.anarazel.de
Backpatch: 15-
A previous commit replaced all the calls to this function with
durable_rename() as of dac1ff3, making it used nowhere in the tree.
Using it in extension code is also risky based on the issues described
in this previous commit, so let's remove it. This makes possible the
removal of HAVE_WORKING_LINK.
Author: Nathan Bossart
Reviewed-by: Robert Haas, Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/20220407182954.GA1231544@nathanxps13
Previously, we trusted the OS not to report EEXIST unless we'd passed in
IPC_CREAT | IPC_EXCL or O_CREAT | O_EXCL, as appropriate. Solaris's
shm_open() can in fact do that, causing us to crash because we didn't
ereport and then we blithely assumed the mapping was successful.
Let's treat EEXIST just like any other error, unless we're actually
trying to create a new segment. This applies to shm_open(), where this
behavior has been seen, and also to the equivalent operations for our
sysv and mmap modes just on principle.
Based on the underlying reason for the error, namely contention on a
lock file managed by Solaris librt for each distinct name, this problem
is only likely to happen on 15 and later, because the new shared memory
stats system produces shm_open() calls for the same path from
potentially large numbers of backends concurrently during
authentication. Earlier releases only shared memory segments between a
small number of parallel workers under one Gather node. You could
probably hit it if you tried hard enough though, and we should have been
more defensive in the first place. Therefore, back-patch to all
supported releases.
Per build farm animal margay. This isn't the end of the story, though,
it just changes random crashes into random "File exists" errors; more
work needed for a green build farm.
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKGKqKrCV5xKWfh9rnm%3Do%3DDwZLTLtnsj_XpUi9g5%3DV%2B9oyg%40mail.gmail.com
TransactionIdIsInProgress had a fast path to return 'false' if the
single-item CLOG cache said that the transaction was known to be
committed. However, that was wrong, because a transaction is first
marked as committed in the CLOG but doesn't become visible to others
until it has removed its XID from the proc array. That could lead to an
error:
ERROR: t_xmin is uncommitted in tuple to be updated
or for an UPDATE to go ahead without blocking, before the previous
UPDATE on the same row was made visible.
The window is usually very short, but synchronous replication makes it
much wider, because the wait for synchronous replica happens in that
window.
Another thing that makes it hard to hit is that it's hard to get such
a commit-in-progress transaction into the single item CLOG cache.
Normally, if you call TransactionIdIsInProgress on such a transaction,
it determines that the XID is in progress without checking the CLOG
and without populating the cache. One way to prime the cache is to
explicitly call pg_xact_status() on the XID. Another way is to use a
lot of subtransactions, so that the subxid cache in the proc array is
overflown, making TransactionIdIsInProgress rely on pg_subtrans and
CLOG checks.
This has been broken ever since it was introduced in 2008, but the race
condition is very hard to hit, especially without synchronous
replication. There were a couple of reports of the error starting from
summer 2021, but no one was able to find the root cause then.
TransactionIdIsKnownCompleted() is now unused. In 'master', remove it,
but I left it in place in backbranches in case it's used by extensions.
Also change pg_xact_status() to check TransactionIdIsInProgress().
Previously, it only checked the CLOG, and returned "committed" before
the transaction was actually made visible to other queries. Note that
this also means that you cannot use pg_xact_status() to reproduce the
bug anymore, even if the code wasn't fixed.
Report and analysis by Konstantin Knizhnik. Patch by Simon Riggs, with
the pg_xact_status() change added by me.
Author: Simon Riggs
Reviewed-by: Andres Freund
Discussion: https://www.postgresql.org/message-id/flat/4da7913d-398c-e2ad-d777-f752cf7f0bbb%40garret.ru
Since commit 6a2a70a02, we've used signalfd() to receive latch wakeups
when building with WAIT_USE_EPOLL (default for Linux and illumos), and
our traditional self-pipe when falling back to WAIT_USE_POLL (default
for other Unixes with neither epoll() nor kqueue()).
Unexplained hangs and kernel panics have been reported on illumos
systems, apparently linked to this use of signalfd(), leading illumos
users and build farm members to have to define WAIT_USE_POLL explicitly
as a work-around. A bug report exists at
https://www.illumos.org/issues/13700 but no fix is available yet.
Let's provide a way for illumos users to go back to self-pipes with
epoll(), like releases before 14, and choose that by default. No change
for Linux users. To help with development/debugging, macros
WAIT_USE_{EPOLL,POLL} and WAIT_USE_{SIGNALFD,SELF_PIPE} can be defined
explicitly to override the defaults.
Back-patch to 14, where we started using signalfd().
Reported-by: Japin Li <japinli@hotmail.com>
Reported-by: Olaf Bohlen <olbohlen@eenfach.de> (off-list)
Reviewed-by: Japin Li <japinli@hotmail.com>
Discussion: https://postgr.es/m/MEYP282MB1669C8D88F0997354C2313C1B6CA9%40MEYP282MB1669.AUSP282.PROD.OUTLOOK.COM
The original advice for hard-wired SetConfigOption calls was to use
PGC_S_OVERRIDE, particularly for PGC_INTERNAL GUCs. However,
that's really overkill for PGC_INTERNAL GUCs, since there is no
possibility that we need to override a user-provided setting.
Instead use PGC_S_DYNAMIC_DEFAULT in most places, so that the
value will appear with source = 'default' in pg_settings and thereby
not be shown by psql's new \dconfig command. The one exception is
that when changing in_hot_standby in a hot-standby session, we still
use PGC_S_OVERRIDE, because people felt that seeing that in \dconfig
would be a good thing.
Similarly use PGC_S_DYNAMIC_DEFAULT for the auto-tune value of
wal_buffers (if possible, that is if wal_buffers wasn't explicitly
set to -1), and for the typical 2MB value of max_stack_depth.
In combination these changes remove four not-very-interesting
entries from the typical output of \dconfig, all of which people
fingered as "why is that showing up?" in the discussion thread.
Discussion: https://postgr.es/m/3118455.1649267333@sss.pgh.pa.us
This reverts commit d9d076222f "VACUUM: ignore indexing operations
with CONCURRENTLY".
These changes caused indexes created with the CONCURRENTLY option to
miss heap tuples that were HOT-updated and HOT-pruned during the index
creation. Before these changes, HOT pruning would have been prevented
by the Xmin of the transaction creating the index, but because this
change was precisely to allow the Xmin to move forward ignoring that
backend, now other backends scanning the table can prune them. This is
not a problem for VACUUM (which requires a lock that conflicts with a
CREATE INDEX CONCURRENTLY operation), but HOT-prune can definitely
occur. In other words, Xmin advancement was sped up, but at the cost of
corrupting the resulting index.
Regrettably, this means that the new feature in PG14 that RIC/CIC on
very large tables no longer force VACUUM to retain very old tuples goes
away. We might try to implement it again in a later release, but for
now the risk of indexes missing tuples is too high and there's no easy
fix.
Backpatch to 14, where this change appeared.
Reported-by: Peter Slavov <pet.slavov@gmail.com>
Diagnosys-by: Andrey Borodin <x4mmm@yandex-team.ru>
Diagnosys-by: Michael Paquier <michael@paquier.xyz>
Diagnosys-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/17485-396609c6925b982d%40postgresql.org
With the old logic, when the reciever had not yet attached, we would
never call shm_mq_inc_bytes_written(), even if force_flush = true
was specified. That could result in a situation where data that the
sender believes it has sent is never received.
Along the way, remove a useless function prototype for a nonexistent
function from shm_mq.h.
Commit 46846433a0 introduced these
problems.
Pavan Deolasee, with a few changes by me.
Discussion: https://postgr.es/m/CABOikdPkwtLLCTnzzmpSMXo3QZa2yXq0J7Q61ssdLFAJYrOVvQ@mail.gmail.com
This is a slight, convenient semantics change from what commit
0f0cfb4940 ("Fix parallel operations that prevent oldest xmin from
advancing") introduced that lets us simplify the coding in the one place
where it is used.
Backpatch to 13. This is related to commit 6fea65508a ("Tighten
ComputeXidHorizons' handling of walsenders") rewriting the code site
where this is used, which has not yet been backpatched, but it may well
be in the future.
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/202204191637.eldwa2exvguw@alvherre.pgsql
Currently, preloaded libraries are expected to request additional
shared memory and LWLocks in _PG_init(). However, it is not unusal
for such requests to depend on MaxBackends, which won't be
initialized at that time. Such requests could also depend on GUCs
that other modules might change. This introduces a new hook where
modules can safely use MaxBackends and GUCs to request additional
shared memory and LWLocks.
Furthermore, this change restricts requests for shared memory and
LWLocks to this hook. Previously, libraries could make requests
until the size of the main shared memory segment was calculated.
Unlike before, we no longer silently ignore requests received at
invalid times. Instead, we FATAL if someone tries to request
additional shared memory or LWLocks outside of the hook.
Nathan Bossart and Julien Rouhaud
Discussion: https://postgr.es/m/20220412210112.GA2065815%40nathanxps13
Discussion: https://postgr.es/m/Yn2jE/lmDhKtkUdr@paquier.xyz
To enable diagnosis of systems that are not processing ProcSignalBarrier
requests promptly, add a LOG message every 5 seconds if we seem to be
wedged. Although you could already see this state as a wait event in
pg_stat_activity, the log message also shows the PID of the process that
is preventing progress.
Also add DEBUG1 logging around the whole wait loop.
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CA%2BTgmoYJ03r5359gQutRGP9BtigYCg3_UskcmnVjBf-QO3-0pQ%40mail.gmail.com
With sufficiently bad luck, it was possible for IssuePendingWritebacks()
to reopen a file after we'd processed PROCSIGNAL_BARRIER_SMGRRELEASE and
before the file was unlinked by some other backend. That left a small
hole in commit 4eb21763's plan to fix all spurious errors from DROP
TABLESPACE and similar on Windows.
Fix by closing md.c's segments, instead of just closing fd.c's
descriptors, and then teaching smgrwriteback() not to open files that
aren't already open.
Reported-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/20220209220004.kb3dgtn2x2k2gtdm%40alap3.anarazel.de
The tests added in 9f8a050f68 failed nearly reliably on FreeBSD in CI, and
occasionally on the buildfarm. That turns out to be caused not by a bug in the
test, but by a longstanding bug in recovery conflict handling.
The standby timeout handler, used by ResolveRecoveryConflictWithBufferPin(),
executed SendRecoveryConflictWithBufferPin() inside a signal handler. A bad
idea, because the deadlock timeout handler (or a spurious latch set) could
have interrupted ProcWaitForSignal(). If unlucky that could cause a
self-deadlock on ProcArrayLock, if the deadlock check is in
SendRecoveryConflictWithBufferPin()->CancelDBBackends().
To fix, set a flag in StandbyTimeoutHandler(), and check the flag in
ResolveRecoveryConflictWithBufferPin().
Subsequently the recovery conflict tests will be backpatched.
Discussion: https://postgr.es/m/20220413002626.udl7lll7f3o7nre7@alap3.anarazel.de
Backpatch: 10-
This reverts commits 2c902bb and ccfbd92. Per buildfarm members
kestrel, rorqual and calliphoridae, the assertions checking that a TLI
history file should not exist when created by a WAL receiver have been
failing, and switching to durable_rename() over durable_rename_excl()
would cause the newest TLI history file to overwrite the existing one.
We need to think harder about such cases, so revert the new logic for
now.
Note that all the failures have been reported in the test
025_stuck_on_old_timeline.
Discussion: https://postgr.es/m/511362.1651116498@sss.pgh.pa.us
ccfbd92 has replaced all existing in-core callers of this function in
favor of durable_rename(). durable_rename_excl() is by nature unsafe on
crashes happening at the wrong time, so just remove it.
Author: Nathan Bossart
Reviewed-by: Robert Haas, Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/20220407182954.GA1231544@nathanxps13
ComputeXidHorizons (nee GetOldestXmin) thought that it could identify
walsenders by checking for proc->databaseId == 0. Perhaps that was
safe when the code was written, but it's been wrong at least since
autovacuum was invented. Background processes that aren't connected
to any particular database, such as the autovacuum launcher and
logical replication launcher, look like that too.
This imprecision is harmful because when such a process advertises an
xmin, the result is to hold back dead-tuple cleanup in all databases,
though it'd be sufficient to hold it back in shared catalogs (which
are the only relations such a process can access). Aside from being
generally inefficient, this has recently been seen to cause regression
test failures in the buildfarm, as a consequence of the logical
replication launcher's startup transaction preventing VACUUM from
marking pages of a user table as all-visible.
We only want that global hold-back effect for the case where a
walsender is advertising a hot standby feedback xmin. Therefore,
invent a new PGPROC flag that says that a process' xmin should be
considered globally, and check that instead of using the incorrect
databaseId == 0 test. Currently only a walsender sets that flag,
and only if it is not connected to any particular database. (This is
for bug-compatibility with the undocumented behavior of the existing
code, namely that feedback sent by a client who has connected to a
particular database would not be applied globally. I'm not sure this
is a great definition; however, such a client is capable of issuing
plain SQL commands, and I don't think we want xmins advertised for
such commands to be applied globally. Perhaps this could do with
refinement later.)
While at it, I rewrote the comment in ComputeXidHorizons, and
re-ordered the commented-upon if-tests, to make them match up
for intelligibility's sake.
This is arguably a back-patchable bug fix, but given the lack of
complaints I think it prudent to let it age awhile in HEAD first.
Discussion: https://postgr.es/m/1346227.1649887693@sss.pgh.pa.us
Only 1 of 3 of these changes appear to be handled by pgindent. That change
is new to v15. The remaining two appear to be left alone by pgindent. The
exact reason for that is not 100% clear to me. It seems related to the
fact that it's a line that contains *only* a single line comment and no
actual code. It does not seem worth investigating this in too much
detail. In any case, these do not conform to our usual practices, so fix
them.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220411020336.GB26620@telsasoft.com
This reverts commits 0147fc7, 4567596, aa64f23, and 5ecd018.
There is no longer agreement that introducing this function
was the right way to address the problem. The consensus now
seems to favor trying to make a correct value for MaxBackends
available to mdules executing their _PG_init() functions.
Nathan Bossart
Discussion: http://postgr.es/m/20220323045229.i23skfscdbvrsuxa@jrouhaud
Before commit 412ad7a556, delayChkpt
was a Boolean. Now it's an integer. Extensions using it need to be
appropriately updated, so let's rename the field to make sure that
a hard compilation failure occurs.
Replacing delayChkpt with delayChkptFlags made a few comments extend
past 80 characters, so I reflowed them and changed some wording very
slightly.
The back-branches will need a different change to restore compatibility
with existing minor releases; this is just for master.
Per suggestion from Tom Lane.
Discussion: http://postgr.es/m/a7880f4d-1d74-582a-ada7-dad168d046d1@enterprisedb.com
Previously, the output of EXPLAIN (BUFFERS) option showed only the I/O
timing spent reading and writing shared and local buffers. This commit
adds on top of that the I/O timing for temporary buffers in the output
of EXPLAIN (for spilled external sorts, hashes, materialization. etc).
This can be helpful for users in cases where the I/O related to
temporary buffers is the bottleneck.
Like its cousin, this information is available only when track_io_timing
is enabled. Playing the patch, this is showing an extra overhead of up
to 1% even when using gettimeofday() as implementation for interval
timings, which is slightly within the usual range noise still that's
measurable.
Author: Masahiko Sawada
Reviewed-by: Georgios Kokolatos, Melanie Plageman, Julien Rouhaud,
Ranier Vilela
Discussion: https://postgr.es/m/CAD21AoAJgotTeP83p6HiAGDhs_9Fw9pZ2J=_tYTsiO5Ob-V5GQ@mail.gmail.com
Reclaim space from the line pointer array when heap pruning leaves
behind a contiguous group of LP_UNUSED items at the end of the array.
This happens during subsequent page defragmentation. Certain kinds of
heap line pointer bloat are ameliorated by this new optimization.
Follow-up work to commit 3c3b8a4b26, which taught VACUUM to truncate the
line pointer array in about the same way during VACUUM's second pass
over the heap. We now apply line pointer array truncation during both
the first and the second pass over the heap made by VACUUM. We can also
perform line pointer array truncation during opportunistic pruning.
Matthias van de Meent, with small tweaks by me.
Author: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAEze2WjgaQc55Y5f5CQd3L=eS5CZcff2Obxp=O6pto8-f0hC4w@mail.gmail.com
Discussion: https://postgr.es/m/CAEze2Wg36%2B4at2eWJNcYNiW2FJmht34x3YeX54ctUSs7kKoNcA%40mail.gmail.com
Introduce a new GUC recovery_prefetch. When enabled, look ahead in the
WAL and try to initiate asynchronous reading of referenced data blocks
that are not yet cached in our buffer pool. For now, this is done with
posix_fadvise(), which has several caveats. Since not all OSes have
that system call, "try" is provided so that it can be enabled where
available. Better mechanisms for asynchronous I/O are possible in later
work.
Set to "try" for now for test coverage. Default setting to be finalized
before release.
The GUC wal_decode_buffer_size limits the distance we can look ahead in
bytes of decoded data.
The existing GUC maintenance_io_concurrency is used to limit the number
of concurrent I/Os allowed, based on pessimistic heuristics used to
infer that I/Os have begun and completed. We'll also not look more than
maintenance_io_concurrency * 4 block references ahead.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Tomas Vondra <tomas.vondra@2ndquadrant.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com> (earlier version)
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier version)
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com> (earlier version)
Tested-by: Tomas Vondra <tomas.vondra@2ndquadrant.com> (earlier version)
Tested-by: Jakub Wartak <Jakub.Wartak@tomtom.com> (earlier version)
Tested-by: Dmitry Dolgov <9erthalion6@gmail.com> (earlier version)
Tested-by: Sait Talha Nisanci <Sait.Nisanci@microsoft.com> (earlier version)
Discussion: https://postgr.es/m/CA%2BhUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq%3DAovOddfHpA%40mail.gmail.com
Previously the statistics collector received statistics updates via UDP and
shared statistics data by writing them out to temporary files regularly. These
files can reach tens of megabytes and are written out up to twice a
second. This has repeatedly prevented us from adding additional useful
statistics.
Now statistics are stored in shared memory. Statistics for variable-numbered
objects are stored in a dshash hashtable (backed by dynamic shared
memory). Fixed-numbered stats are stored in plain shared memory.
The header for pgstat.c contains an overview of the architecture.
The stats collector is not needed anymore, remove it.
By utilizing the transactional statistics drop infrastructure introduced in a
prior commit statistics entries cannot "leak" anymore. Previously leaked
statistics were dropped by pgstat_vacuum_stat(), called from [auto-]vacuum. On
systems with many small relations pgstat_vacuum_stat() could be quite
expensive.
Now that replicas drop statistics entries for dropped objects, it is not
necessary anymore to reset stats when starting from a cleanly shut down
replica.
Subsequent commits will perform some further code cleanup, adapt docs and add
tests.
Bumps PGSTAT_FILE_FORMAT_ID.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-By: "David G. Johnston" <david.g.johnston@gmail.com>
Reviewed-By: Tomas Vondra <tomas.vondra@2ndquadrant.com> (in a much earlier version)
Reviewed-By: Arthur Zakirov <a.zakirov@postgrespro.ru> (in a much earlier version)
Reviewed-By: Antonin Houska <ah@cybertec.at> (in a much earlier version)
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Discussion: https://postgr.es/m/20220308205351.2xcn6k4x5yivcxyd@alap3.anarazel.de
Discussion: https://postgr.es/m/20210319235115.y3wz7hpnnrshdyv6@alap3.anarazel.de
One problematic part of the current statistics collector design is that there
is no reliable way of getting rid of statistics entries. Because of that
pgstat_vacuum_stat() (called by [auto-]vacuum) matches all stats for the
current database with the catalog contents and tries to drop now-superfluous
entries. That's quite expensive. What's worse, it doesn't work on physical
replicas, despite physical replicas collection statistics entries.
This commit introduces infrastructure to create / drop statistics entries
transactionally, together with the underlying catalog objects (functions,
relations, subscriptions). pgstat_xact.c maintains a list of stats entries
created / dropped transactionally in the current transaction. To ensure the
removal of statistics entries is durable dropped statistics entries are
included in commit / abort (and prepare) records, which also ensures that
stats entries are dropped on standbys.
Statistics entries created separately from creating the underlying catalog
object (e.g. when stats were previously lost due to an immediate restart)
are *not* WAL logged. However that can only happen outside of the transaction
creating the catalog object, so it does not lead to "leaked" statistics
entries.
For this to work, functions creating / dropping functions / relations /
subscriptions need to call into pgstat. For subscriptions this was already
done when dropping subscriptions, via pgstat_report_subscription_drop() (now
renamed to pgstat_drop_subscription()).
This commit does not actually drop stats yet, it just provides the
infrastructure. It is however a largely independent piece of infrastructure,
so committing it separately makes sense.
Bumps XLOG_PAGE_MAGIC.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
It might seem pointless to allow use of dsm in single user mode, but otherwise
subsystems might need dedicated single user mode code paths.
Besides changing the assert, all that's needed is to make some windows code
assuming the presence of postmaster conditional.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/CA+hUKGL9hY_VY=+oUK+Gc1iSRx-Ls5qeYJ6q=dQVZnT3R63Taw@mail.gmail.com
Because this strategy logs changes on a block-by-block basis, it
avoids the need to checkpoint before and after the operation.
However, because it logs each changed block individually, it might
generate a lot of extra write-ahead logging if the template database
is large. Therefore, the older strategy remains available via a new
STRATEGY parameter to CREATE DATABASE, and a corresponding --strategy
option to createdb.
Somewhat controversially, this patch assembles the list of relations
to be copied to the new database by reading the pg_class relation of
the template database. Cross-database access like this isn't normally
possible, but it can be made to work here because there can't be any
connections to the database being copied, nor can it contain any
in-doubt transactions. Even so, we have to use lower-level interfaces
than normal, since the table scan and relcache interfaces will not
work for a database to which we're not connected. The advantage of
this approach is that we do not need to rely on the filesystem to
determine what ought to be copied, but instead on PostgreSQL's own
knowledge of the database structure. This avoids, for example,
copying stray files that happen to be located in the source database
directory.
Dilip Kumar, with a fairly large number of cosmetic changes by me.
Reviewed and tested by Ashutosh Sharma, Andres Freund, John Naylor,
Greg Nancarrow, Neha Sharma. Additional feedback from Bruce Momjian,
Heikki Linnakangas, Julien Rouhaud, Adam Brusselback, Kyotaro
Horiguchi, Tomas Vondra, Andrew Dunstan, Álvaro Herrera, and others.
Discussion: http://postgr.es/m/CA+TgmoYtcdxBjLh31DLxUXHxFVMPGzrU5_T=CYCvRyFHywSBUQ@mail.gmail.com
If TRUNCATE causes some buffers to be invalidated and thus the
checkpoint does not flush them, TRUNCATE must also ensure that the
corresponding files are truncated on disk. Otherwise, a replay
from the checkpoint might find that the buffers exist but have
the wrong contents, which may cause replay to fail.
Report by Teja Mupparti. Patch by Kyotaro Horiguchi, per a design
suggestion from Heikki Linnakangas, with some changes to the
comments by me. Review of this and a prior patch that approached
the issue differently by Heikki Linnakangas, Andres Freund, Álvaro
Herrera, Masahiko Sawada, and Tom Lane.
Discussion: http://postgr.es/m/BYAPR06MB6373BF50B469CA393C614257ABF00@BYAPR06MB6373.namprd06.prod.outlook.com
Commands like ALTER TABLE SET TABLESPACE may leave files for the next
checkpoint to clean up. If such files are not removed by the time DROP
TABLESPACE is called, we request a checkpoint so that they are deleted.
However, there is presently a window before checkpoint start where new
unlink requests won't be scheduled until the following checkpoint. This
means that the checkpoint forced by DROP TABLESPACE might not remove the
files we expect it to remove, and the following ERROR will be emitted:
ERROR: tablespace "mytblspc" is not empty
To fix, add a call to AbsorbSyncRequests() just before advancing the
unlink cycle counter. This ensures that any unlink requests forwarded
prior to checkpoint start (i.e., when ckpt_started is incremented) will
be processed by the current checkpoint. Since AbsorbSyncRequests()
performs memory allocations, it cannot be called within a critical
section, so we also need to move SyncPreCheckpoint() to before
CreateCheckPoint()'s critical section.
This is an old bug, so back-patch to all supported versions.
Author: Nathan Bossart <nathandbossart@gmail.com>
Reported-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220215235845.GA2665318%40nathanxps13
If we run out of space in the checkpointer sync request queue (which is
hopefully rare on real systems, but common with very small buffer pool),
we wait for it to drain. While waiting, we should report that as a wait
event so that users know what is going on, and also handle postmaster
death, since otherwise the loop might never terminate if the
checkpointer has exited.
Back-patch to 12. Although the problem exists in earlier releases too,
the code is structured differently before 12 so I haven't gone any
further for now, in the absence of field complaints.
Reported-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220226213942.nb7uvb2pamyu26dj%40alap3.anarazel.de
Set-returning functions that use the Materialize mode, creating a
tuplestore to include all the tuples returned in a set rather than doing
so in multiple calls, use roughly the same set of steps to prepare
ReturnSetInfo for this job:
- Check if ReturnSetInfo supports returning a tuplestore and if the
materialize mode is enabled.
- Create a tuplestore for all the tuples part of the returned set in the
per-query memory context, stored in ReturnSetInfo->setResult.
- Build a tuple descriptor mostly from get_call_result_type(), then
stored in ReturnSetInfo->setDesc. Note that there are some cases where
the SRF's tuple descriptor has to be the one specified by the function
caller.
This refactoring is done so as there are (well, should be) no behavior
changes in any of the in-core functions refactored, and the centralized
function that checks and sets up the function's ReturnSetInfo can be
controlled with a set of bits32 options. Two of them prove to be
necessary now:
- SRF_SINGLE_USE_EXPECTED to use expectedDesc as tuple descriptor, as
expected by the function's caller.
- SRF_SINGLE_BLESS to validate the tuple descriptor for the SRF.
The same initialization pattern is simplified in 28 places per my
count as of src/backend/, shaving up to ~900 lines of code. These
mostly come from the removal of the per-query initializations and the
sanity checks now grouped in a single location. There are more
locations that could be simplified in contrib/, that are left for a
follow-up cleanup.
fcc2817, 07daca5 and d61a361 have prepared the areas of the code related
to this change, to ease this refactoring.
Author: Melanie Plageman, Michael Paquier
Reviewed-by: Álvaro Herrera, Justin Pryzby
Discussion: https://postgr.es/m/CAAKRu_azyd1Z3W_r7Ou4sorTjRCs+PxeHw1CWJeXKofkE6TuZg@mail.gmail.com
Most of these are cases where we could call memcpy() or other libc
functions with a NULL pointer and a zero count, which is forbidden
by POSIX even though every production version of libc allows it.
We've fixed such things before in a piecemeal way, but apparently
never made an effort to try to get them all. I don't claim that
this patch does so either, but it gets every failure I observe in
check-world, using clang 12.0.1 on current RHEL8.
numeric.c has a different issue that the sanitizer doesn't like:
"ln(-1.0)" will compute log10(0) and then try to assign the
resulting -Inf to an integer variable. We don't actually use the
result in such a case, so there's no live bug.
Back-patch to all supported branches, with the idea that we might
start running a buildfarm member that tests this case. This includes
back-patching c1132aae3 (Check the size in COPY_POINTER_FIELD),
which previously silenced some of these issues in copyfuncs.c.
Discussion: https://postgr.es/m/CALNJ-vT9r0DSsAOw9OXVJFxLENoVS_68kJ5x0p44atoYH+H4dg@mail.gmail.com
See also afdeff1052. Failures after that commit provided a few more hints,
but not yet enough to understand what's going on.
In 019_replslot_limit.pl shut down nodes with fast instead of immediate mode
if we observe the failure mode. That should tell us whether the failures we're
observing are just a timing issue under high load. PGCTLTIMEOUT should prevent
buildfarm animals from hanging endlessly.
Also adds a bit more logging to replication slot drop and ShutdownPostgres().
Discussion: https://postgr.es/m/20220225192941.hqnvefgdzaro6gzg@alap3.anarazel.de
This routine is a no-op since dd04e95 from 2003, with a macro kept
around for compatibility purposes. This has led to the same code
patterns being copy-pasted around for no effect, sometimes in confusing
ways like in pg_logical_slot_get_changes_guts() from logical.c where the
code was actually incorrect.
This issue has been discussed on two different threads recently, so
rather than living with this legacy, remove any uses of this routine in
the C code to simplify things. The compatibility macro is kept to avoid
breaking any out-of-core modules that depend on it.
Reported-by: Tatsuhito Kasahara, Justin Pryzby
Author: Tatsuhito Kasahara
Discussion: https://postgr.es/m/20211217200419.GQ17618@telsasoft.com
Discussion: https://postgr.es/m/CAP0=ZVJeeYfAeRfmzqAF2Lumdiv4S4FewyBnZd4DPTrsSQKJKw@mail.gmail.com
This moves the functions related to performing WAL recovery into the new
xlogrecovery.c source file, leaving xlog.c responsible for maintaining
the WAL buffers, coordinating the startup and switch from recovery to
normal operations, and other miscellaneous stuff that have always been in
xlog.c.
Reviewed-by: Andres Freund, Kyotaro Horiguchi, Robert Haas
Discussion: https://www.postgresql.org/message-id/a31f27b4-a31d-f976-6217-2b03be646ffa%40iki.fi
Previously, replication slots were released in ProcKill() on error, resulting
in reporting replication slot drop of ephemeral slots after the stats
subsystem was already shut down.
To fix this problem, move replication slot release to a before_shmem_exit()
hook that is called before the stats collector shuts down. There wasn't really
a good reason for the slot handling to be in ProcKill() anyway.
Patch by Masahiko Sawada, with very minor polishing by me.
I, Andres, wrote a test for dropping slots during process exit, but there may
be some OS dependent issues around the number of times FATAL error messages
are displayed due to a still debated libpq issue. So that test will be
committed separately / later.
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-By: Andres Freund <andres@anarazel.de>
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAD21AoDAeEpAbZEyYJsPZJUmSPaRicVSBObaL7sPaofnKz+9zg@mail.gmail.com
Provide a way for WaitEventSet to report that the remote peer has shut
down its socket, independently of whether there is any buffered data
remaining to be read. This works only on systems where the kernel
exposes that information, namely:
* WAIT_USE_POLL builds using POLLRDHUP, if available
* WAIT_USE_EPOLL builds using EPOLLRDHUP
* WAIT_USE_KQUEUE builds using EV_EOF
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Reviewed-by: Maksim Milyutin <milyutinma@gmail.com>
Discussion: https://postgr.es/m/77def86b27e41f0efcba411460e929ae%40postgrespro.ru
Previously, it was possible for DROP DATABASE, DROP TABLESPACE and ALTER
DATABASE SET TABLESPACE to fail because other backends still had file
handles open for dropped tables. Windows won't allow a directory
containing unlinked-but-still-open files to be unlinked. Tackle this
problem by forcing all backends to close all smgr fds. No change for
Unix systems, which don't suffer from the problem, but the new code path
can be tested by Unix-based developers by defining
USE_BARRIER_SMGRRELEASE explicitly.
It's possible that PROCSIGNAL_BARRIER_SMGRRELEASE will have more
bug-fixing applications soon (under discussion). Note that this is the
first user of the ProcSignalBarrier mechanism from commit 16a4e4aec. It
could in principle be back-patched as far as 14, but since field
complaints are rare and ProcSignalBarrier hasn't been battle-tested,
that seems like a bad idea. Fix in master only, where these failures
have started to show up in automated testing due to new tests.
Suggested-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CA+hUKGLdemy2gBm80kz20GTe6hNVwoErE8KwcJk6-U56oStjtg@mail.gmail.com
Some of the code paths changed by aa64f23 can reduce the number of times
GetMaxBackends() is called. The performance gain is marginal, but most
of the code changed by this commit already did that. Hence, let's be
clean and apply the same rule everywhere, for consistency.
Some of the code paths, like in deadlock.c, involve only assertions.
These are left unchanged.
Reviewed-by: Nathan Bossart, Robert Haas
Discussion: https://postgr.es/m/YgMpGZhPOjNfS7er@paquier.xyz
Commit 6a2a70a02 supposed that any platform having <sys/epoll.h>
would also have <sys/signalfd.h>. It turns out there are still a
few people using platforms where that's not so, so we'd better make
a separate configure probe for it. But since it took this long to
notice, I'm content with the decision to not have a separate code
path for epoll-only machines; we'll just fall back to using poll()
for these stragglers.
Per gripe from Gabriela Serventi. Back-patch to v14 where this
code came in.
Discussion: https://postgr.es/m/CAHOHWE-JjJDfcYuLAAEO7Jk07atFAU47z8TzHzg71gbC0aMy=g@mail.gmail.com
Previously, it was really easy to write code that accessed MaxBackends
before we'd actually initialized it, especially when coding up an
extension. To make this less error-prune, introduce a new function
GetMaxBackends() which should be used to obtain the correct value.
This will ERROR if called too early. Demote the global variable to
a file-level static, so that nobody can peak at it directly.
Nathan Bossart. Idea by Andres Freund. Review by Greg Sabino Mullane,
by Michael Paquier (who had doubts about the approach), and by me.
Discussion: http://postgr.es/m/20210802224204.bckcikl45uezv5e4@alap3.anarazel.de
xlog.h is directly and indirectly #included in a lot of places. With
this change, xloginsert.h is no longer unnecessarily included in the
large number of them that don't need it.
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/CALj2ACVe-W+WM5P44N7eG9C2_FmaeM8Dq5aCnD3fHt0Ba=WR6w@mail.gmail.com
Commit 8431e296ea reworked ProcArrayApplyRecoveryInfo to sort XIDs
before adding them to KnownAssignedXids. But the XIDs are sorted using
xidComparator, which compares the XIDs simply as uint32 values, not
logically. KnownAssignedXidsAdd() however expects XIDs in logical order,
and calls TransactionIdFollowsOrEquals() to enforce that. If there are
XIDs for which the two orderings disagree, an error is raised and the
recovery fails/restarts.
Hitting this issue is fairly easy - you just need two transactions, one
started before the 4B limit (e.g. XID 4294967290), the other sometime
after it (e.g. XID 1000). Logically (4294967290 <= 1000) but when
compared using xidComparator we try to add them in the opposite order.
Which makes KnownAssignedXidsAdd() fail with an error like this:
ERROR: out-of-order XID insertion in KnownAssignedXids
This only happens during replica startup, while processing RUNNING_XACTS
records to build the snapshot. Once we reach STANDBY_SNAPSHOT_READY, we
skip these records. So this does not affect already running replicas,
but if you restart (or create) a replica while there are transactions
with XIDs for which the two orderings disagree, you may hit this.
Long-running transactions and frequent replica restarts increase the
likelihood of hitting this issue. Once the replica gets into this state,
it can't be started (even if the old transactions are terminated).
Fixed by sorting the XIDs logically - this is fine because we're dealing
with normal XIDs (because it's XIDs assigned to backends) and from the
same wraparound epoch (otherwise the backends could not be running at
the same time on the primary node). So there are no problems with the
triangle inequality, which is why xidComparator compares raw values.
Investigation and root cause analysis by Abhijit Menon-Sen. Patch by me.
This issue is present in all releases since 9.4, however releases up to
9.6 are EOL already so backpatch to 10 only.
Reviewed-by: Abhijit Menon-Sen
Reviewed-by: Alvaro Herrera
Backpatch-through: 10
Discussion: https://postgr.es/m/36b8a501-5d73-277c-4972-f58a4dce088a%40enterprisedb.com
This fixes a set of issues that have accumulated over the past months
(or years) in various code areas. Most fixes are related to some recent
additions, as of the development of v15.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220124030001.GQ23027@telsasoft.com
Previously, invoking pg_terminate_backend() or pg_cancel_backend()
with the postmaster PID produced a "PID XXXX is not a PostgresSQL
server process" warning, which does not make sense. Change to
"backend process" to make the message more exact.
Nathan Bossart, based on an idea from Bharath Rupireddy with
input from Tom Lane and Euler Taveira
Discussion: https://www.postgresql.org/message-id/flat/CALj2ACW7Rr-R7mBcBQiXWPp=JV5chajjTdudLiF5YcpW-BmHhg@mail.gmail.com
Instead of referring to target backends by pid, use pgprocno. This
means that we don't have to scan the ProcArray and we can drop some
special case code for dealing with the startup process.
Discussion: https://postgr.es/m/CA%2BhUKGLYRyDaneEwz5Uya_OgFLMx5BgJfkQSD%3Dq9HmwsfRRb-w%40mail.gmail.com
Reviewed-by: Soumyadeep Chakraborty <soumyadeep2007@gmail.com>
Reviewed-by: Ashwin Agrawal <ashwinstar@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
The term "super-exclusive lock" is a synonym for "buffer cleanup lock"
that first appeared in nbtree many years ago. Standardize things by
consistently using the term cleanup lock. This finishes work started by
commit 276db875.
There is no good reason to have two terms. But there is a good reason
to only have one: to avoid confusion around why VACUUM acquires a full
cleanup lock (not just an ordinary exclusive lock) in index AMs, during
ambulkdelete calls. This has nothing to do with protecting the physical
index data structure itself. It is needed to implement a locking
protocol that ensures that TIDs pointing to the heap/table structure
cannot get marked for recycling by VACUUM before it is safe (which is
somewhat similar to how VACUUM uses cleanup locks during its first heap
pass). Note that it isn't strictly necessary for index AMs to implement
this locking protocol -- several index AMs use an MVCC snapshot as their
sole interlock to prevent unsafe TID recycling.
In passing, update the nbtree README. Cleanly separate discussion of
the aforementioned index vacuuming locking protocol from discussion of
the "drop leaf page pin" optimization added by commit 2ed5b87f. We now
structure discussion of the latter by describing how individual index
scans may safely opt out of applying the standard locking protocol (and
so can avoid blocking progress by VACUUM). Also document why the
optimization is not safe to apply during nbtree index-only scans.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WzngHgQa92tz6NQihf4nxJwRzCV36yMJO_i8dS+2mgEVKw@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-WzkHPgsBBvGWjz=8PjNhDefy7XRkDKiT5NxMs-n5ZCf2dA@mail.gmail.com
Standardize on xoroshiro128** as our basic PRNG algorithm, eliminating
a bunch of platform dependencies as well as fundamentally-obsolete PRNG
code. In addition, this API replacement will ease replacing the
algorithm again in future, should that become necessary.
xoroshiro128** is a few percent slower than the drand48 family,
but it can produce full-width 64-bit random values not only 48-bit,
and it should be much more trustworthy. It's likely to be noticeably
faster than the platform's random(), depending on which platform you
are thinking about; and we can have non-global state vectors easily,
unlike with random(). It is not cryptographically strong, but neither
are the functions it replaces.
Fabien Coelho, reviewed by Dean Rasheed, Aleksander Alekseev, and myself
Discussion: https://postgr.es/m/alpine.DEB.2.22.394.2105241211230.165418@pseudo
While determining xid horizons, we skip over backends that are running
Vacuum. We also ignore Create Index Concurrently, or Reindex Concurrently
for the purposes of computing Xmin for Vacuum. But we were not setting the
flags corresponding to these operations when they are performed in
parallel which was preventing Xid horizon from advancing.
The optimization related to skipping Create Index Concurrently, or Reindex
Concurrently operations was implemented in PG-14 but the fix is the same
for the Parallel Vacuum as well so back-patched till PG-13.
Author: Masahiko Sawada
Reviewed-by: Amit Kapila
Backpatch-through: 13
Discussion: https://postgr.es/m/CAD21AoCLQqgM1sXh9BrDFq0uzd3RBFKi=Vfo6cjjKODm0Onr5w@mail.gmail.com
Currently, lastOverflowedXid is never reset. It's just adjusted on new
transactions known to be overflowed. But if there are no overflowed
transactions for a long time, snapshots could be mistakenly marked as
suboverflowed due to wraparound.
This commit fixes this issue by resetting lastOverflowedXid when needed
altogether with KnownAssignedXids.
Backpatch to all supported versions.
Reported-by: Stan Hu
Discussion: https://postgr.es/m/CAMBWrQ%3DFp5UAsU_nATY7EMY7NHczG4-DTDU%3DmCvBQZAQ6wa2xQ%40mail.gmail.com
Author: Kyotaro Horiguchi, Alexander Korotkov
Reviewed-by: Stan Hu, Simon Riggs, Nikolay Samokhvalov, Andrey Borodin, Dmitry Dolgov
If lo_export() fails to open the target file or to write to it, it leaks
the created LargeObjectDesc and its snapshot in the top-transaction
context and resource owner. That's pretty harmless, it's a small leak
after all, but it gives the user a "Snapshot reference leak" warning.
Fix by using a short-lived memory context and no resource owner for
transient LargeObjectDescs that are opened and closed within one function
call. The leak is easiest to reproduce with lo_export() on a directory
that doesn't exist, but in principle the other lo_* functions could also
fail.
Backpatch to all supported versions.
Reported-by: Andrew B
Reviewed-by: Alvaro Herrera
Discussion: https://www.postgresql.org/message-id/32bf767a-2d65-71c4-f170-122f416bab7e@iki.fi
As in commits 6301c3ada and e9d9ba2a4, avoid doing repetitive
list_delete_first() operations, since that would be expensive when
there are many files waiting to be unlinked. This is a slightly
larger change than in those cases. We have to keep the list state
valid for calls to AbsorbSyncRequests(), so it's necessary to invent a
"canceled" field instead of immediately deleting PendingUnlinkEntry
entries. Also, because we might not be able to process all the
entries, we need a new list primitive list_delete_first_n().
list_delete_first_n() is almost list_copy_tail(), but it modifies the
input List instead of making a new copy. I found a couple of existing
uses of the latter that could profitably use the new function. (There
might be more, but the other callers look like they probably shouldn't
overwrite the input List.)
As before, back-patch to v13.
Discussion: https://postgr.es/m/CD2F0E7F-9822-45EC-A411-AE56F14DEA9F@amazon.com
When replaying a transaction that held many exclusive locks on the
primary, a standby server's startup process would expend O(N^2)
effort on manipulating the list of locks. This code was fine when
written, but commit 1cff1b95a made repetitive list_delete_first()
calls inefficient, as explained in its commit message. Fix by just
iterating the list normally, and releasing storage only when done.
(This'd be inadequate if we needed to recover from an error occurring
partway through; but we don't.)
Back-patch to v13 where 1cff1b95a came in.
Nathan Bossart
Discussion: https://postgr.es/m/CD2F0E7F-9822-45EC-A411-AE56F14DEA9F@amazon.com
Users sometimes get concerned whe they start the server and it
emits a few messages and then doesn't emit any more messages for
a long time. Generally, what's happening is either that the
system is taking a long time to apply WAL, or it's taking a
long time to reset unlogged relations, or it's taking a long
time to fsync the data directory, but it's not easy to tell
which is the case.
To fix that, add a new 'log_startup_progress_interval' setting,
by default 10s. When an operation that is known to be potentially
long-running takes more than this amount of time, we'll log a
status update each time this interval elapses.
To avoid undesirable log chatter, don't log anything about WAL
replay when in standby mode.
Nitin Jadhav and Robert Haas, reviewed by Amul Sul, Bharath
Rupireddy, Justin Pryzby, Michael Paquier, and Álvaro Herrera.
Discussion: https://postgr.es/m/CA+TgmoaHQrgDFOBwgY16XCoMtXxsrVGFB2jNCvb7-ubuEe1MGg@mail.gmail.com
Discussion: https://postgr.es/m/CAMm1aWaHF7VE69572_OLQ+MgpT5RUiUDgF1x5RrtkJBLdpRj3Q@mail.gmail.com
The purpose of commit 8a54e12a38 was to
fix this, and it sufficed when the PREPARE TRANSACTION completed before
the CIC looked for lock conflicts. Otherwise, things still broke. As
before, in a cluster having used CIC while having enabled prepared
transactions, queries that use the resulting index can silently fail to
find rows. It may be necessary to reindex to recover from past
occurrences; REINDEX CONCURRENTLY suffices. Fix this for future index
builds by making CIC wait for arbitrarily-recent prepared transactions
and for ordinary transactions that may yet PREPARE TRANSACTION. As part
of that, have PREPARE TRANSACTION transfer locks to its dummy PGPROC
before it calls ProcArrayClearTransaction(). Back-patch to 9.6 (all
supported versions).
Andrey Borodin, reviewed (in earlier versions) by Andres Freund.
Discussion: https://postgr.es/m/01824242-AA92-4FE9-9BA7-AEBAFFEA3D0C@yandex-team.ru
Do not update shm_mq's mq_bytes_written until we have written
an amount of data greater than 1/4th of the ring size, unless
the caller of shm_mq_send(v) requests a flush at the end of
the message. This reduces the number of calls to SetLatch(),
and also the number of CPU cache misses, considerably, and thus
makes shm_mq significantly faster.
Dilip Kumar, reviewed by Zhihong Yu and Tomas Vondra. Some
minor cosmetic changes by me.
Discussion: http://postgr.es/m/CAFiTN-tVXqn_OG7tHNeSkBbN+iiCZTiQ83uakax43y1sQb2OBA@mail.gmail.com
This runtime-computed GUC shows the number of huge pages required
for the server's main shared memory area, taking advantage of the
work done in 0c39c29 and 0bd305e. This is useful for users to estimate
the amount of huge pages required for a server as it becomes possible to
do an estimation without having to start the server and potentially
allocate a large chunk of shared memory.
The number of huge pages is calculated based on the existing GUC
huge_page_size if set, or by using the system's default by looking at
/proc/meminfo on Linux. There is nothing new here as this commit reuses
the existing calculation methods, and just exposes this information
directly to the user. The routine calculating the huge page size is
refactored to limit the number of files with platform-specific flags.
This new GUC's name was the most popular choice based on the discussion
done. This is only supported on Linux.
I have taken the time to test the change on Linux, Windows and MacOS,
though for the last two ones large pages are not supported. The first
one calculates correctly the number of pages depending on the existing
GUC huge_page_size or the system's default.
Thanks to Andres Freund, Robert Haas, Kyotaro Horiguchi, Tom Lane,
Justin Pryzby (and anybody forgotten here) for the discussion.
Author: Nathan Bossart
Discussion: https://postgr.es/m/F2772387-CE0F-46BF-B5F1-CC55516EB885@amazon.com
ProcArrayGroupClearXid function has a parameter named "proc",
but the same name was used for its local variables. This commit fixes
this variable shadowing, to improve code readability.
Back-patch to all supported versions, to make future back-patching
easy though this patch is classified as refactoring only.
Reported-by: Ranier Vilela
Author: Ranier Vilela, Aleksander Alekseev
https://postgr.es/m/CAEudQAqyoTZC670xWi6w-Oe2_Bk1bfu2JzXz6xRfiOUzm7xbyQ@mail.gmail.com
All size_t variables declared in procarray.c are actually int ones.
Let's use int instead of size_t for those variables. Which would
reduce Wsign-compare compiler warnings.
Back-patch to v14 where commit 941697c3c1 added size_t variables
in procarray.c, to make future back-patching easy though
this patch is classified as refactoring only.
Reported-by: Ranier Vilela
Author: Ranier Vilela, Aleksander Alekseev
https://postgr.es/m/CAEudQAqyoTZC670xWi6w-Oe2_Bk1bfu2JzXz6xRfiOUzm7xbyQ@mail.gmail.com
We don't allow relations to exceed 2^32-1 blocks, because block
numbers are 32 bits and the last possible block number is reserved
to mean InvalidBlockNumber. There is a check for this in mdextend,
but that's really way too late, because the smgr API requires us to
create a buffer for the block-to-be-added, and we do not want to
have any buffer with blocknum InvalidBlockNumber. (Such a case
can trigger assertions in bufmgr.c, plus I think it might confuse
ReadBuffer's logic for data-past-EOF later on.) So put the check
into ReadBuffer.
Per report from Christoph Berg. It's been like this forever,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/YTn1iTkUYBZfcODk@msg.credativ.de
This runtime-computed GUC shows the size of the server's main shared
memory area, taking into account the amount of shared memory allocated
by extensions as this is calculated after processing
shared_preload_libraries.
Author: Nathan Bossart
Discussion: https://postgr.es/m/F2772387-CE0F-46BF-B5F1-CC55516EB885@amazon.com
All the code paths simplified here were already using a boolean or used
an expression that led to zero or one, making the extra bits
unnecessary.
Author: Justin Pryzby
Reviewed-by: Tom Lane, Michael Paquier, Peter Smith
Discussion: https://postgr.es/m/20210428182936.GE27406@telsasoft.com
This change refactors the shared memory size calculation in
CreateSharedMemoryAndSemaphores() to its own function. This is intended
for use in a future change related to the setup of huge pages and shared
memory with some GUCs, while useful on its own for extensions.
Author: Nathan Bossart
Discussion: https://postgr.es/m/F2772387-CE0F-46BF-B5F1-CC55516EB885@amazon.com
We had a complaint that the postmaster fails to start if the invoking
program closes stdin. That happens because count_usable_fds expects
to be able to dup(0), and if it can't, we conclude there are no free
FDs and go belly-up. So far as I can find, though, there is no other
place in the server that touches stdin, and it's not unreasonable to
expect that a daemon wouldn't use that file.
As a simple improvement, let's dup FD 2 (stderr) instead. Unlike stdin,
it *is* reasonable for us to expect that stderr be open; even if we are
configured not to touch it, common libraries such as libc might try to
write error messages there.
Per gripe from Mario Emmenlauer. Given the lack of previous complaints,
I'm not excited about pushing this into stable branches, but it seems
OK to squeeze it into v14.
Discussion: https://postgr.es/m/48bafc63-c30f-3962-2ded-f2e985d93e86@emmenlauer.de
Use one fileset for the entire worker lifetime instead of using
separate filesets for each streaming transaction. Now, the
changes/subxacts files for every streaming transaction will be
created under the same fileset and the files will be deleted
after the transaction is completed.
This patch extends the BufFileOpenFileSet and BufFileDeleteFileSet
APIs to allow users to specify whether to give an error on missing
files.
Author: Dilip Kumar, based on suggestion by Thomas Munro
Reviewed-by: Hou Zhijie, Masahiko Sawada, Amit Kapila
Discussion: https://postgr.es/m/E1mCC6U-0004Ik-Fs@gemulon.postgresql.org
Move fileset related implementation out of sharedfileset.c to allow its
usage by backends that don't want to share filesets among different
processes. After this split, fileset infrastructure is used by both
sharedfileset.c and worker.c for the named temporary files that survive
across transactions.
Author: Dilip Kumar, based on suggestion by Andres Freund
Reviewed-by: Hou Zhijie, Masahiko Sawada, Amit Kapila
Discussion: https://postgr.es/m/E1mCC6U-0004Ik-Fs@gemulon.postgresql.org
Since a partitioned index doesn't have storage, getting the number of
blocks from it will not give sensible results. Existing callers
already check that they don't call it that way, so there doesn't
appear to be a live problem. But for correctness, handle
RELKIND_PARTITIONED_INDEX together with the other non-storage
relkinds.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://www.postgresql.org/message-id/1d3a5fbe-f48b-8bea-80da-9a5c4244aef9@enterprisedb.com
Commit 80abbeba2 evidently didn't bother checking this code.
Also, list the generated executable in .gitignore (so it's
been a REALLY long time since anyone tried this).
Noted while trying out RISC-V spinlock patch. Given that
this has been broken for 5 years and nobody noticed, it's
likely not worth back-patching.
As reported by a few OSX buildfarm animals there exist at least one path where
temporary files exist during AtProcExit_Files() processing. As temporary file
cleanup causes pgstat reporting, the assertions added in ee3f8d3d3a caused
failures.
This is not an OSX specific issue, we were just lucky that timing on OSX
reliably triggered the problem. The known way to cause this is a FATAL error
during perform_base_backup() with a MANIFEST used - adding an elog(FATAL)
after InitializeBackupManifest() reliably reproduces the problem in isolation.
The problem is that the temporary file created in InitializeBackupManifest()
is not cleaned up via resource owner cleanup as WalSndResourceCleanup()
currently is only used for non-FATAL errors. That then allows to reach
AtProcExit_Files() with existing temporary files, causing the assertion
failure.
To fix this problem, move temporary file cleanup to a before_shmem_exit() hook
and add assertions ensuring that no temporary files are created before / after
temporary file management has been initialized / shut down. The cleanest way
to do so seems to be to split fd.c initialization into two, one for plain file
access and one for temporary file access.
Right now there's no need to perform further fd.c cleanup during process exit,
so I just renamed AtProcExit_Files() to BeforeShmemExit_Files(). Alternatively
we could perform another pass through the files to check that no temporary
files exist, but the added assertions seem to provide enough protection
against that.
It might turn out that the assertions added in ee3f8d3d3a will cause too much
noise - in that case we'll have to downgrade them to a WARNING, at least
temporarily.
This commit is not necessarily the best approach to address this issue, but it
should resolve the buildfarm failures. We can revise later.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210807190131.2bm24acbebl4wl6i@alap3.anarazel.de
For EXEC_BACKEND InitProcess()/InitAuxiliaryProcess() needs to have been
called well before we call BaseInit(), as SubPostmasterMain() needs LWLocks to
work. Having the order of initialization differ between platforms makes it
unnecessarily hard to understand the system and to add initialization points
for new subsystems without a lot of duplication.
To be able to change the order, BaseInit() cannot trigger
CreateSharedMemoryAndSemaphores() anymore - obviously that needs to have
happened before we can call InitProcess(). It seems cleaner to create shared
memory explicitly in single user/bootstrap mode anyway.
After this change the separation of bufmgr initialization into
InitBufferPoolAccess() / InitBufferPoolBackend() is not meaningful anymore so
the latter is removed.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20210802164124.ufo5buo4apl6yuvs@alap3.anarazel.de
These have been unrelated since bgwriter and checkpointer were split into two
processes in 806a2aee37. As there several pending patches (shared memory
stats, extending the set of tracked IO / buffer statistics) that are made a
bit more awkward by the grouping, split them. Done separately to make
reviewing easier.
This does *not* change the contents of pg_stat_bgwriter or move fields out of
bgwriter/checkpointer stats that arguably do not belong in either. However
pgstat_fetch_global() was renamed and split into
pgstat_fetch_stat_checkpointer() and pgstat_fetch_stat_bgwriter().
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210405092914.mmxqe7j56lsjfsej@alap3.anarazel.de
Start up the checkpointer and bgwriter during crash recovery (except in
--single mode), as we do for replication. This wasn't done back in
commit cdd46c76 out of caution. Now it seems like a better idea to make
the environment as similar as possible in both cases. There may also be
some performance advantages.
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Tested-by: Jakub Wartak <Jakub.Wartak@tomtom.com>
Discussion: https://postgr.es/m/CA%2BhUKGJ8NRsqgkZEnsnRc2MFROBV-jCnacbYvtpptK2A9YYp9Q%40mail.gmail.com
They are used in code that runs both during normal operation and during
WAL replay, and needs to behave differently during replay. Move them to
xlogutils.c, because that's where we have other helper functions used by
redo routines.
Reviewed-by: Andres Freund
Discussion: https://www.postgresql.org/message-id/b3b71061-4919-e882-4857-27e370ab134a%40iki.fi
The point of introducing the hash_mem_multiplier GUC was to let users
reproduce the old behavior of hash aggregation, i.e. that it could use
more than work_mem at need. However, the implementation failed to get
the job done on Win64, where work_mem is clamped to 2GB to protect
various places that calculate memory sizes using "long int". As
written, the same clamp was applied to hash_mem. This resulted in
severe performance regressions for queries requiring a bit more than
2GB for hash aggregation, as they now spill to disk and there's no
way to stop that.
Getting rid of the work_mem restriction seems like a good idea, but
it's a big job and could not conceivably be back-patched. However,
there's only a fairly small number of places that are concerned with
the hash_mem value, and it turns out to be possible to remove the
restriction there without too much code churn or any ABI breaks.
So, let's do that for now to fix the regression, and leave the
larger task for another day.
This patch does introduce a bit more infrastructure that should help
with the larger task, namely pg_bitutils.h support for working with
size_t values.
Per gripe from Laurent Hasson. Back-patch to v13 where the
behavior change came in.
Discussion: https://postgr.es/m/997817.1627074924@sss.pgh.pa.us
Discussion: https://postgr.es/m/MN2PR15MB25601E80A9B6D1BA6F592B1985E39@MN2PR15MB2560.namprd15.prod.outlook.com
5a1e1d8302 was a minimal bug fix for dc7420c2c9. To avoid future bugs of
that kind, deduplicate the choice of a relation's horizon into a new helper,
GlobalVisHorizonKindForRel().
As the code in question was only introduced in dc7420c2c9 it seems worth
backpatching this change as well, otherwise 14 will look different from all
other branches.
A different approach to this was suggested by Matthias van de Meent.
Author: Andres Freund
Discussion: https://postgr.es/m/20210621122919.2qhu3pfugxxp3cji@alap3.anarazel.de
Backpatch: 14, like 5a1e1d8302
We have an implementation restriction that PREPARE TRANSACTION can't
handle cases where both session-lifespan and transaction-lifespan locks
are held on the same lockable object. (That's because we'd otherwise
need to acquire a new PROCLOCK entry during post-prepare cleanup, which
is an operation that might fail. The situation can only arise with odd
usages of advisory locks, so removing the restriction is probably not
worth the amount of effort it would take.) AtPrepare_Locks attempted
to enforce this, but its logic was many bricks shy of a load, because
it only detected cases where the session and transaction locks had the
same lockmode. Locks of different modes on the same object would lead
to the rather unhelpful message "PANIC: we seem to have dropped a bit
somewhere".
To fix, build a transient hashtable with one entry per locktag,
not one per locktag + mode, and use that to detect conflicts.
Per bug #17122 from Alexander Pyhalov. This bug is ancient,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/17122-04f3c32098a62233@postgresql.org
No concrete problem reported, but in the past it's been known to cause
problems on some compilers so let's avoid doing that.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/234364.1626704007%40sss.pgh.pa.us
A couple of open flags used in an assertion didn't exist in macOS 10.4.
Per build farm animal prairiedog. Also add O_EXCL while here (there are
a few more standard flags but they're not relevant and likely to be
missing).
Macs don't understand O_DIRECT, but they can disable caching with a
separate fcntl() call. Extend the file opening functions in fd.c to
handle this for us if the caller passes in PG_O_DIRECT.
For now, this affects only WAL data and even then only if you set:
max_wal_senders=0
wal_level=minimal
This is not expected to be very useful on its own, but later proposed
patches will make greater use of direct I/O, and it'll be useful for
testing if developers on Macs can see the effects.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKG%2BADiyyHe0cun2wfT%2BSVnFVqNYPxoO6J9zcZkVO7%2BNGig%40mail.gmail.com
As of v14, pg_depend contains almost 7000 "pin" entries recording
the OIDs of built-in objects. This is a fair amount of bloat for
every database, and it adds time to pg_depend lookups as well as
initdb. We can get rid of all of those entries in favor of an OID
range check, i.e. "OIDs below FirstUnpinnedObjectId are pinned".
(template1 and the public schema are exceptions. Those exceptions
are now wired into IsPinnedObject() instead of initdb's code for
filling pg_depend, but it's the same amount of cruft either way.)
The contents of pg_shdepend are modified likewise.
Discussion: https://postgr.es/m/3737988.1618451008@sss.pgh.pa.us
The idea behind this patch is to design out bugs like the one fixed
by commit 9d523119f. Previously, once one did RelationOpenSmgr(rel),
it was considered okay to access rel->rd_smgr directly for some
not-very-clear interval. But since that pointer will be cleared by
relcache flushes, we had bugs arising from overreliance on a previous
RelationOpenSmgr call still being effective.
Now, very little code except that in rel.h and relcache.c should ever
touch the rd_smgr field directly. The normal coding rule is to use
RelationGetSmgr(rel) and not expect the result to be valid for longer
than one smgr function call. There are a couple of places where using
the function every single time seemed like overkill, but they are now
annotated with large warning comments.
Amul Sul, after an idea of mine.
Discussion: https://postgr.es/m/CANiYTQsU7yMFpQYnv=BrcRVqK_3U3mtAzAsJCaqtzsDHfsUbdQ@mail.gmail.com
Several places were performing a tight loop to determine the first power
of 2 number that's > or >= the required memory. Instead of using a loop
for that, we can use pg_nextpower2_32 or pg_nextpower2_64. When we need a
power of 2 number equal to or greater than a given amount, we just pass
the amount to the nextpower2 function. When we need a power of 2 greater
than the amount, we just pass the amount + 1.
Additionally, in tsearch there were a couple of locations that were
performing a while loop when a simple "if" would have done. In both of
these locations only 1 item is being added, so the loop could only have
ever iterated once. Changing the loop into an if statement makes the code
very slightly more optimal as the condition is checked once rather than
twice.
There are quite a few remaining locations that increase the size of the
buffer in the following form:
while (reqsize >= buflen)
{
buflen *= 2;
buf = repalloc(buf, buflen);
}
These are not touched in this commit. repalloc will error out for sizes
larger than MaxAllocSize. Changing these to use pg_nextpower2_32 would
remove the chance of that error being raised. It's unclear from the code
if the sizes could ever become that large, so err on the side of caution.
Discussion: https://postgr.es/m/CAApHDvp=tns7RL4PH0ZR0M+M-YFLquK7218x=0B_zO+DbOma+w@mail.gmail.com
Reviewed-by: Zhihong Yu
In dc7420c2c9 I (Andres) accidentally used
RelationIsAccessibleInLogicalDecoding() as the sole condition to use the
non-shared catalog horizon in GetOldestNonRemovableTransactionId(). That is
incorrect, as RelationIsAccessibleInLogicalDecoding() checks whether wal_level
is logical.
The correct check, as done e.g. in GlobalVisTestFor(), is to check
IsCatalogRelation() and RelationIsAccessibleInLogicalDecoding().
The observed misbehavior of this bug was that there could be an endless loop
in lazy_scan_prune(), because the horizons used in heap_page_prune() and the
individual tuple liveliness checks did not match. Likely there are other
potential consequences as well.
A later commit will unify the determination which horizon has to be used, and
add additional assertions to make it easier to catch a bug like this.
Reported-By: Justin Pryzby <pryzby@telsasoft.com>
Diagnosed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Author: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAEze2Wg32Y9+WJfw=aofkRx1ZRFt_Ev6bNPc4PSaz7PjSFtZgQ@mail.gmail.com
It was unable to wait on a backend that had already left the procarray.
Users tolerant of that limitation can poll pg_stat_activity. Other
users can employ the "timeout" argument of pg_terminate_backend().
Reviewed by Bharath Rupireddy.
Discussion: https://postgr.es/m/20210605013236.GA208701@rfd.leadboat.com
Revert the pg_description entry to its v13 form, since those messages
usually remain shorter and don't discuss individual parameters. No
catversion bump, since pg_description content does not impair backend
compatibility or application compatibility.
Justin Pryzby
Discussion: https://postgr.es/m/20210612182743.GY16435@telsasoft.com
941697c3c1 changed ProcArrayAdd()/Remove() substantially. As reported by
zhanyi, I missed that due to the introduction of the PGPROC->pgxactoff
ProcArrayRemove() does not need to search for the position in
procArray->pgprocnos anymore - that's pgxactoff. Remove the search loop.
The removal of the search loop reduces assertion coverage a bit - but we can
easily do better than before by adding assertions to other loops over
pgprocnos elements.
Also do a bit of cleanup, mostly by reducing line lengths by introducing local
helper variables and adding newlines.
Author: zhanyi <w@hidva.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/tencent_5624AA3B116B3D1C31CA9744@qq.com
Also "make reformat-dat-files".
The only change worthy of note is that pgindent messed up the formatting
of launcher.c's struct LogicalRepWorkerId, which led me to notice that
that struct wasn't used at all anymore, so I just took it out.
This set of commits has some bugs with known fixes, but at this late
stage in the release cycle it seems best to revert and resubmit next
time, along with some new automated test coverage for this whole area.
Commits reverted:
dc88460c: Doc: Review for "Optionally prefetch referenced data in recovery."
1d257577: Optionally prefetch referenced data in recovery.
f003d9f8: Add circular WAL decoding buffer.
323cbe7c: Remove read_page callback from XLogReader.
Remove the new GUC group WAL_RECOVERY recently added by a55a9847, as the
corresponding section of config.sgml is now reverted.
Discussion: https://postgr.es/m/CAOuzzgrn7iKnFRsB4MHp3UisEQAGgZMbk_ViTN4HV4-Ksq8zCg%40mail.gmail.com
If dtrace is compiled in but disabled, the lwlock dtrace probes still
evaluate their arguments. Since PostgreSQL 13, T_NAME(lock) does
nontrivial work, so it should be avoided if not needed. To fix, make
these calls conditional on the *_ENABLED() macro corresponding to each
probe.
Reviewed-by: Craig Ringer <craig.ringer@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/CAGRY4nwxKUS_RvXFW-ugrZBYxPFFM5kjwKT5O+0+Stuga5b4+Q@mail.gmail.com
Instead, put them in via a format placeholder. This reduces the
number of distinct translatable messages and also reduces the chances
of typos during translation. We already did this for the system call
arguments in a number of cases, so this is just the same thing taken a
bit further.
Discussion: https://www.postgresql.org/message-id/flat/92d6f545-5102-65d8-3c87-489f71ea0a37%40enterprisedb.com
Introduce a new GUC recovery_prefetch, disabled by default. When
enabled, look ahead in the WAL and try to initiate asynchronous reading
of referenced data blocks that are not yet cached in our buffer pool.
For now, this is done with posix_fadvise(), which has several caveats.
Better mechanisms will follow in later work on the I/O subsystem.
The GUC maintenance_io_concurrency is used to limit the number of
concurrent I/Os we allow ourselves to initiate, based on pessimistic
heuristics used to infer that I/Os have begun and completed.
The GUC wal_decode_buffer_size is used to limit the maximum distance we
are prepared to read ahead in the WAL to find uncached blocks.
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com> (parts)
Reviewed-by: Andres Freund <andres@anarazel.de> (parts)
Reviewed-by: Tomas Vondra <tomas.vondra@2ndquadrant.com> (parts)
Tested-by: Tomas Vondra <tomas.vondra@2ndquadrant.com>
Tested-by: Jakub Wartak <Jakub.Wartak@tomtom.com>
Tested-by: Dmitry Dolgov <9erthalion6@gmail.com>
Tested-by: Sait Talha Nisanci <Sait.Nisanci@microsoft.com>
Discussion: https://postgr.es/m/CA%2BhUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq%3DAovOddfHpA%40mail.gmail.com
This adds a function, pg_wait_for_backend_termination(), and a new
timeout argument to pg_terminate_backend(), which will wait for the
backend to actually terminate (with or without signaling it to do so
depending on which function is called). The default behaviour of
pg_terminate_backend() remains being timeout=0 which does not waiting.
For pg_wait_for_backend_termination() the default wait is 5 seconds.
Author: Bharath Rupireddy
Reviewed-By: Fujii Masao, David Johnston, Muhammad Usama,
Hou Zhijie, Magnus Hagander
Discussion: https://postgr.es/m/CALj2ACUBpunmyhYZw-kXCYs5NM+h6oG_7Df_Tn4mLmmUQifkqA@mail.gmail.com
If you know the ID of a buffer that recently held a block that you would
like to pin, this function can be used check if it's still there. It
can be used to avoid a second lookup in the buffer mapping table after
PrefetchBuffer() reports a cache hit.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq=AovOddfHpA@mail.gmail.com
Teach VACUUM to truncate the line pointer array of each heap page when a
contiguous group of LP_UNUSED line pointers appear at the end of the
array -- these unused and unreferenced items are excluded. This process
occurs during VACUUM's second pass over the heap, right after LP_DEAD
line pointers on the page (those encountered/pruned during the first
pass) are marked LP_UNUSED.
Truncation avoids line pointer bloat with certain workloads,
particularly those involving continual range DELETEs and bulk INSERTs
against the same table.
Also harden heapam code to check for an out-of-range page offset number
in places where we weren't already doing so.
Author: Matthias van de Meent <boekewurm+postgres@gmail.com>
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-By: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAEze2WjgaQc55Y5f5CQd3L=eS5CZcff2Obxp=O6pto8-f0hC4w@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-Wzn6a64PJM1Ggzm=uvx2otsopJMhFQj_g1rAj4GWr3ZSzw@mail.gmail.com
Snapshot caching, introduced in 623a9ba79b, did not increment
xactCompletionCount during subtransaction abort. That could lead to an older
snapshot being reused. That is, at least as far as I can see, not a
correctness issue (for MVCC snapshots there's no difference between "in
progress" and "aborted"). The only difference between the old and new
snapshots would be a newer ->xmax.
While HeapTupleSatisfiesMVCC makes the same visibility determination, reusing
the old snapshot leads HeapTupleSatisfiesMVCC to not set
HEAP_XMIN_INVALID. Which subsequently causes the kill_prior_tuple optimization
to not kick in (via HeapTupleIsSurelyDead() returning false). The performance
effects of doing the same index-lookups over and over again is how the issue
was discovered...
Fix the issue by incrementing xactCompletionCount in
XidCacheRemoveRunningXids. It already acquires ProcArrayLock exclusively,
making that an easy proposition.
Add a test to ensure that kill_prior_tuple prevents index growth when it
involves aborted subtransaction of the current transaction.
Author: Andres Freund
Discussion: https://postgr.es/m/20210406043521.lopeo7bbigad3n6t@alap3.anarazel.de
Discussion: https://postgr.es/m/20210317055718.v6qs3ltzrformqoa%40alap3.anarazel.de
Commit 3e98c0bafb added pg_backend_memory_contexts view to display
the memory contexts of the backend process. However its target process
is limited to the backend that is accessing to the view. So this is
not so convenient when investigating the local memory bloat of other
backend process. To improve this situation, this commit adds
pg_log_backend_memory_contexts() function that requests to log
the memory contexts of the specified backend process.
This information can be also collected by calling
MemoryContextStats(TopMemoryContext) via a debugger. But
this technique cannot be used in some environments because no debugger
is available there. So, pg_log_backend_memory_contexts() allows us to
see the memory contexts of specified backend more easily.
Only superusers are allowed to request to log the memory contexts
because allowing any users to issue this request at an unbounded rate
would cause lots of log messages and which can lead to denial of service.
On receipt of the request, at the next CHECK_FOR_INTERRUPTS(),
the target backend logs its memory contexts at LOG_SERVER_ONLY level,
so that these memory contexts will appear in the server log but not
be sent to the client. It logs one message per memory context.
Because if it buffers all memory contexts into StringInfo to log them
as one message, which may require the buffer to be enlarged very much
and lead to OOM error since there can be a large number of memory
contexts in a backend.
When a backend process is consuming huge memory, logging all its
memory contexts might overrun available disk space. To prevent this,
now this patch limits the number of child contexts to log per parent
to 100. As with MemoryContextStats(), it supposes that practical cases
where the log gets long will typically be huge numbers of siblings
under the same parent context; while the additional debugging value
from seeing details about individual siblings beyond 100 will not be large.
There was another proposed patch to add the function to return
the memory contexts of specified backend as the result sets,
instead of logging them, in the discussion. However that patch is
not included in this commit because it had several issues to address.
Thanks to Tatsuhito Kasahara, Andres Freund, Tom Lane, Tomas Vondra,
Michael Paquier, Kyotaro Horiguchi and Zhihong Yu for the discussion.
Bump catalog version.
Author: Atsushi Torikoshi
Reviewed-by: Kyotaro Horiguchi, Zhihong Yu, Fujii Masao
Discussion: https://postgr.es/m/0271f440ac77f2a4180e0e56ebd944d1@oss.nttdata.com
Maxim Orlov reported that the shutdown of standby server could result in
the following assertion failure. The cause of this issue was that,
when the shutdown caused the startup process to exit, recovery-time
transaction tracking was not shut down even if it's already initialized,
and some locks the tracked transactions were holding could not be released.
At this situation, if other process was invoked and the PGPROC entry that
the startup process used was assigned to it, it found such unreleased locks
and caused the assertion failure, during the initialization of it.
TRAP: FailedAssertion("SHMQueueEmpty(&(MyProc->myProcLocks[i]))"
This commit fixes this issue by making the startup process shut down
transaction tracking and release all locks, at the exit of it.
Back-patch to all supported branches.
Reported-by: Maxim Orlov
Author: Fujii Masao
Reviewed-by: Maxim Orlov
Discussion: https://postgr.es/m/ad4ce692cc1d89a093b471ab1d969b0b@postgrespro.ru
pgstat_report_wait_start() and pgstat_report_wait_end() required two
conditional branches so far. One to check if MyProc is NULL, the other to
check if pgstat_track_activities is set. As wait events are used around
comparatively lightweight operations, and are inlined (reducing branch
predictor effectiveness), that's not great.
The dependency on MyProc has a second disadvantage: Low-level subsystems, like
storage/file/fd.c, report wait events, but architecturally it is preferable
for them to not depend on inter-process subsystems like proc.h (defining
PGPROC). After this change including pgstat.h (nor obviously its
sub-components like backend_status.h, wait_event.h, ...) does not pull in IPC
related headers anymore.
These goals, efficiency and abstraction, are achieved by having
pgstat_report_wait_start/end() not interact with MyProc, but instead a new
my_wait_event_info variable. At backend startup it points to a local variable,
removing the need to check for MyProc being NULL. During process
initialization my_wait_event_info is redirected to MyProc->wait_event_info. At
shutdown this is reversed. Because wait event reporting now does not need to
know about where the wait event is stored, it does not need to know about
PGPROC anymore.
The removal of the branch for checking pgstat_track_activities is simpler:
Don't check anymore. The cost due to the branch are often higher than the
store - and even if not, pgstat_track_activities is rarely disabled.
The main motivator to commit this work now is that removing the (indirect)
pgproc.h include from pgstat.h simplifies a patch to move statistics reporting
to shared memory (which still has a chance to get into 14).
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210402194458.2vu324hkk2djq6ce@alap3.anarazel.de
This implements asynchronous execution, which runs multiple parts of a
non-parallel-aware Append concurrently rather than serially to improve
performance when possible. Currently, the only node type that can be
run concurrently is a ForeignScan that is an immediate child of such an
Append. In the case where such ForeignScans access data on different
remote servers, this would run those ForeignScans concurrently, and
overlap the remote operations to be performed simultaneously, so it'll
improve the performance especially when the operations involve
time-consuming ones such as remote join and remote aggregation.
We may extend this to other node types such as joins or aggregates over
ForeignScans in the future.
This also adds the support for postgres_fdw, which is enabled by the
table-level/server-level option "async_capable". The default is false.
Robert Haas, Kyotaro Horiguchi, Thomas Munro, and myself. This commit
is mostly based on the patch proposed by Robert Haas, but also uses
stuff from the patch proposed by Kyotaro Horiguchi and from the patch
proposed by Thomas Munro. Reviewed by Kyotaro Horiguchi, Konstantin
Knizhnik, Andrey Lepikhov, Movead Li, Thomas Munro, Justin Pryzby, and
others.
Discussion: https://postgr.es/m/CA%2BTgmoaXQEt4tZ03FtQhnzeDEMzBck%2BLrni0UWHVVgOTnA6C1w%40mail.gmail.com
Discussion: https://postgr.es/m/CA%2BhUKGLBRyu0rHrDCMC4%3DRn3252gogyp1SjOgG8SEKKZv%3DFwfQ%40mail.gmail.com
Discussion: https://postgr.es/m/20200228.170650.667613673625155850.horikyota.ntt%40gmail.com
This commit is mostly a revert of aaa3aed, that switched the routine
doing the internal renaming of recycled WAL segments to use on Windows a
combination of CreateHardLinkA() plus unlink() instead of rename(). As
reported by several users of Postgres 13, this is causing concurrency
issues when manipulating WAL segments, mostly in the shape of the
following error:
LOG: could not rename file "pg_wal/000000XX000000YY000000ZZ":
Permission denied
This moves back to a logic where a single rename() (well, pgrename() for
Windows) is used. This issue has proved to be hard to hit when I tested
it, facing it only once with an archive_command that was not able to do
its work, so it is environment-sensitive. The reporters of this issue
have been able to confirm that the situation improved once we switched
back to a single rename(). In order to check things, I have provided to
the reporters a patched build based on 13.2 with aaa3aed reverted, to
test if the error goes away, and an unpatched build of 13.2 to test if
the error still showed up (just to make sure that I did not mess up my
build process).
Extra thanks to Fujii Masao for pointing out what looked like the
culprit commit, and to all the reporters for taking the time to test
what I have sent them.
Reported-by: Andrus, Guy Burgess, Yaroslav Pashinsky, Thomas Trenz
Reviewed-by: Tom Lane, Andres Freund
Discussion: https://postgr.es/m/3861ff1e-0923-7838-e826-094cc9bef737@hot.ee
Discussion: https://postgr.es/m/16874-c3eecd319e36a2bf@postgresql.org
Discussion: https://postgr.es/m/095ccf8d-7f58-d928-427c-b17ace23cae6@burgess.co.nz
Discussion: https://postgr.es/m/16927-67c570d968c99567%40postgresql.org
Discussion: https://postgr.es/m/YFBcRbnBiPdGZvfW@paquier.xyz
Backpatch-through: 13
Since commit 2ce439f3 we have opened every file in the data directory
and called fsync() at the start of crash recovery. This can be very
slow if there are many files, leading to field complaints of systems
taking minutes or even hours to begin crash recovery.
Provide an alternative method, for Linux only, where we call syncfs() on
every possibly different filesystem under the data directory. This is
equivalent, but avoids faulting in potentially many inodes from
potentially slow storage.
The new mode comes with some caveats, described in the documentation, so
the default value for the new setting is "fsync", preserving the older
behavior.
Reported-by: Michael Brown <michael.brown@discourse.org>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Paul Guo <guopa@vmware.com>
Reviewed-by: Bruce Momjian <bruce@momjian.us>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: David Steele <david@pgmasters.net>
Discussion: https://postgr.es/m/11bc2bb7-ecb5-3ad0-b39f-df632734cd81%40discourse.org
Discussion: https://postgr.es/m/CAEET0ZHGnbXmi8yF3ywsDZvb3m9CbdsGZgfTXscQ6agcbzcZAw%40mail.gmail.com
After a crash of a backend using temporary files, the files used to be
left behind, on the basis that it might be useful for debugging. But we
don't have any reports of anyone actually doing that, and it means the
disk usage may grow over time due to repeated backend failures (possibly
even hitting ENOSPC). So this behavior is a bit unfortunate, and fixing
it required either manual cleanup (deleting files, which is error-prone)
or restart of the instance (i.e. service disruption).
This implements automatic cleanup of temporary files, controled by a new
GUC remove_temp_files_after_crash. By default the files are removed, but
it can be disabled to restore the old behavior if needed.
Author: Euler Taveira
Reviewed-by: Tomas Vondra, Michael Paquier, Anastasia Lubennikova, Thomas Munro
Discussion: https://postgr.es/m/CAH503wDKdYzyq7U-QJqGn%3DGm6XmoK%2B6_6xTJ-Yn5WSvoHLY1Ww%40mail.gmail.com
This commit changes WAL archiver process so that it's treated as
an auxiliary process and can use shared memory. This is an infrastructure
patch required for upcoming shared-memory based stats collector patch
series. These patch series basically need any processes including archiver
that can report the statistics to access to shared memory. Since this patch
itself is useful to simplify the code and when users monitor the status of
archiver, it's committed separately in advance.
This commit simplifies the code for WAL archiving. For example, previously
backends need to signal to archiver via postmaster when they notify
archiver that there are some WAL files to archive. On the other hand,
this commit removes that signal to postmaster and enables backends to
notify archier directly using shared latch.
Also, as the side of this change, the information about archiver process
becomes viewable at pg_stat_activity view.
Author: Kyotaro Horiguchi
Reviewed-by: Andres Freund, Álvaro Herrera, Julien Rouhaud, Tomas Vondra, Arthur Zakirov, Fujii Masao
Discussion: https://postgr.es/m/20180629.173418.190173462.horiguchi.kyotaro@lab.ntt.co.jp
1. Backends waiting for buffer I/O are now interruptible.
2. If something goes wrong in a backend that is currently performing
I/O, waiting backends no longer wake up until that backend reaches
AbortBufferIO() and broadcasts on the CV. Previously, any waiters would
wake up (because the I/O lock was automatically released) and then
busy-loop until AbortBufferIO() cleared BM_IO_IN_PROGRESS.
3. LWLockMinimallyPadded is removed, as it would now be unused.
Author: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> (earlier version, 2016)
Discussion: https://postgr.es/m/CA%2BhUKGJ8nBFrjLuCTuqKN0pd2PQOwj9b_jnsiGFFMDvUxahj_A%40mail.gmail.com
Discussion: https://postgr.es/m/CA+Tgmoaj2aPti0yho7FeEf2qt-JgQPRWb0gci_o1Hfr=C56Xng@mail.gmail.com
Cut down on system calls and other overheads by waiting for SIGURG
explicitly with kqueue instead of using a signal handler and self-pipe.
Affects *BSD and macOS systems.
This leaves only the poll implementation with a signal handler and the
traditional self-pipe trick.
Discussion: https://postgr.es/m/CA+hUKGJjxPDpzBE0a3hyUywBvaZuC89yx3jK9RFZgfv_KHU7gg@mail.gmail.com
Cut down on system calls and other overheads by reading from a signalfd
instead of using a signal handler and self-pipe. Affects Linux sytems,
and possibly others including illumos that implement the Linux epoll and
signalfd interfaces.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJjxPDpzBE0a3hyUywBvaZuC89yx3jK9RFZgfv_KHU7gg@mail.gmail.com
Traditionally, SIGUSR1 has been overloaded for ad-hoc signals,
procsignal.c signals and latch.c wakeups. Move that last use over to a
new dedicated signal. SIGURG is normally used to report out-of-band
socket data, but PostgreSQL doesn't use that facility.
The signal handler is now installed in all postmaster children by
InitializeLatchSupport(). Those wishing to disconnect from it should
call ShutdownLatchSupport().
Future patches will use this separation of signals to avoid the need for
a signal handler on some operating systems.
Discussion: https://postgr.es/m/CA+hUKGJjxPDpzBE0a3hyUywBvaZuC89yx3jK9RFZgfv_KHU7gg@mail.gmail.com
Commit 82ebbeb0 added a workaround for systems with no epoll_create1()
and EPOLL_CLOEXEC. Linux < 2.6.27 and glibc < 2.9 are long gone. Now
seems like a good time to drop the extra code, because otherwise we'd
have to add similar already-dead workaround code to new patches using
XXX_CLOEXEC flags that arrived in the same kernel release.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKGKL_%3DaO%3Dr30N%3Ds9VoDgTqHpRSzePRbA9dkYO7snc7HsxA%40mail.gmail.com
This adds a new executor node named TID Range Scan. The query planner
will generate paths for TID Range scans when quals are discovered on base
relations which search for ranges on the table's ctid column. These
ranges may be open at either end. For example, WHERE ctid >= '(10,0)';
will return all tuples on page 10 and over.
To support this, two new optional callback functions have been added to
table AM. scan_set_tidrange is used to set the scan range to just the
given range of TIDs. scan_getnextslot_tidrange fetches the next tuple
in the given range.
For AMs were scanning ranges of TIDs would not make sense, these functions
can be set to NULL in the TableAmRoutine. The query planner won't
generate TID Range Scan Paths in that case.
Author: Edmund Horner, David Rowley
Reviewed-by: David Rowley, Tomas Vondra, Tom Lane, Andres Freund, Zhihong Yu
Discussion: https://postgr.es/m/CAMyN-kB-nFTkF=VA_JPwFNo08S0d-Yk0F741S2B7LDmYAi8eyA@mail.gmail.com
Otherwise we risk "leaking" deleted pages by making them non-recyclable
indefinitely. Commit 6655a729 did the same thing for deleted pages in
GiST indexes. That work was used as a starting point here.
Stop storing an XID indicating the oldest bpto.xact across all deleted
though unrecycled pages in nbtree metapages. There is no longer any
reason to care about that condition/the oldest XID. It only ever made
sense when wraparound was something _bt_vacuum_needs_cleanup() had to
consider.
The btm_oldest_btpo_xact metapage field has been repurposed and renamed.
It is now btm_last_cleanup_num_delpages, which is used to remember how
many non-recycled deleted pages remain from the last VACUUM (in practice
its value is usually the precise number of pages that were _newly
deleted_ during the specific VACUUM operation that last set the field).
The general idea behind storing btm_last_cleanup_num_delpages is to use
it to give _some_ consideration to non-recycled deleted pages inside
_bt_vacuum_needs_cleanup() -- though never too much. We only really
need to avoid leaving a truly excessive number of deleted pages in an
unrecycled state forever. We only do this to cover certain narrow cases
where no other factor makes VACUUM do a full scan, and yet the index
continues to grow (and so actually misses out on recycling existing
deleted pages).
These metapage changes result in a clear user-visible benefit: We no
longer trigger full index scans during VACUUM operations solely due to
the presence of only 1 or 2 known deleted (though unrecycled) blocks
from a very large index. All that matters now is keeping the costs and
benefits in balance over time.
Fix an issue that has been around since commit 857f9c36, which added the
"skip full scan of index" mechanism (i.e. the _bt_vacuum_needs_cleanup()
logic). The accuracy of btm_last_cleanup_num_heap_tuples accidentally
hinged upon _when_ the source value gets stored. We now always store
btm_last_cleanup_num_heap_tuples in btvacuumcleanup(). This fixes the
issue because IndexVacuumInfo.num_heap_tuples (the source field) is
expected to accurately indicate the state of the table _after_ the
VACUUM completes inside btvacuumcleanup().
A backpatchable fix cannot easily be extracted from this commit. A
targeted fix for the issue will follow in a later commit, though that
won't happen today.
I (pgeoghegan) have chosen to remove any mention of deleted pages in the
documentation of the vacuum_cleanup_index_scale_factor GUC/param, since
the presence of deleted (though unrecycled) pages is no longer of much
concern to users. The vacuum_cleanup_index_scale_factor description in
the docs now seems rather unclear in any case, and it should probably be
rewritten in the near future. Perhaps some passing mention of page
deletion will be added back at the same time.
Bump XLOG_PAGE_MAGIC due to nbtree WAL records using full XIDs now.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznpdHvujGUwYZ8sihX=d5u-tRYhi-F4wnV2uN2zHpMUXw@mail.gmail.com
As envisioned in commit c98763bf51, it is possible for VACUUM to
ignore certain transactions that are executing CREATE INDEX CONCURRENTLY
and REINDEX CONCURRENTLY for the purposes of computing Xmin; that's
because we know those transactions are not going to examine any other
tables, and are not going to execute anything else in the same
transaction. (Only operations on "safe" indexes can be ignored: those
on indexes that are neither partial nor expressional).
This is extremely useful in cases where CIC/RC can run for a very long
time, because that used to be a significant headache for concurrent
vacuuming of other tables.
Reviewed-by: Matthias van de Meent <boekewurm+postgres@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/20210115133858.GA18931@alvherre.pgsql
Commit 46d6e5f567 added the atomic variable "waitStart" into PGPROC struct,
to store the time at which wait for lock acquisition started. Previously
this variable was initialized every time each backend started. Instead,
this commit makes postmaster initialize it at the startup, to ensure that
the variable should be initialized before any use of it.
This commit also moves the code to initialize "waitStart" variable for
prepare transaction, from TwoPhaseGetDummyProc() to MarkAsPreparingGuts().
Because MarkAsPreparingGuts() is more proper place to do that since
it initializes other PGPROC variables.
Author: Fujii Masao
Reviewed-by: Atsushi Torikoshi
Discussion: https://postgr.es/m/1df88660-6f08-cc6e-b7e2-f85296a2bdab@oss.nttdata.com
This commit adds new column "waitstart" into pg_locks view. This column
reports the time when the server process started waiting for the lock
if the lock is not held. This information is useful, for example, when
examining the amount of time to wait on a lock by subtracting
"waitstart" in pg_locks from the current time, and identify the lock
that the processes are waiting for very long.
This feature uses the current time obtained for the deadlock timeout
timer as "waitstart" (i.e., the time when this process started waiting
for the lock). Since getting the current time newly can cause overhead,
we reuse the already-obtained time to avoid that overhead.
Note that "waitstart" is updated without holding the lock table's
partition lock, to avoid the overhead by additional lock acquisition.
This can cause "waitstart" in pg_locks to become NULL for a very short
period of time after the wait started even though "granted" is false.
This is OK in practice because we can assume that users are likely to
look at "waitstart" when waiting for the lock for a long time.
The first attempt of this patch (commit 3b733fcd04) caused the buildfarm
member "rorqual" (built with --disable-atomics --disable-spinlocks) to report
the failure of the regression test. It was reverted by commit 890d2182a2.
The cause of this failure was that the atomic variable for "waitstart"
in the dummy process entry created at the end of prepare transaction was
not initialized. This second attempt fixes that issue.
Bump catalog version.
Author: Atsushi Torikoshi
Reviewed-by: Ian Lawrence Barwick, Robert Haas, Justin Pryzby, Fujii Masao
Discussion: https://postgr.es/m/a96013dc51cdc56b2a2b84fa8a16a993@oss.nttdata.com
While cleaning up after a parallel query or parallel index creation that
created temporary files, we could be interrupted by a statement timeout.
The error handling path would then fail to clean up the files when it
ran dsm_detach() again, because the callback was already popped off the
list. Prevent this hazard by holding interrupts while the cleanup code
runs.
Thanks to Heikki Linnakangas for this suggestion, and also to Kyotaro
Horiguchi, Masahiko Sawada, Justin Pryzby and Tom Lane for discussion of
this and earlier ideas on how to fix the problem.
Back-patch to all supported releases.
Reported-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20191212180506.GR2082@telsasoft.com
This commit adds new column "waitstart" into pg_locks view. This column
reports the time when the server process started waiting for the lock
if the lock is not held. This information is useful, for example, when
examining the amount of time to wait on a lock by subtracting
"waitstart" in pg_locks from the current time, and identify the lock
that the processes are waiting for very long.
This feature uses the current time obtained for the deadlock timeout
timer as "waitstart" (i.e., the time when this process started waiting
for the lock). Since getting the current time newly can cause overhead,
we reuse the already-obtained time to avoid that overhead.
Note that "waitstart" is updated without holding the lock table's
partition lock, to avoid the overhead by additional lock acquisition.
This can cause "waitstart" in pg_locks to become NULL for a very short
period of time after the wait started even though "granted" is false.
This is OK in practice because we can assume that users are likely to
look at "waitstart" when waiting for the lock for a long time.
Bump catalog version.
Author: Atsushi Torikoshi
Reviewed-by: Ian Lawrence Barwick, Robert Haas, Justin Pryzby, Fujii Masao
Discussion: https://postgr.es/m/a96013dc51cdc56b2a2b84fa8a16a993@oss.nttdata.com
GlobalVisIsRemovableFullXid() is now GlobalVisCheckRemovableFullXid().
This is consistent with the general convention for FullTransactionId
equivalents of functions that deal with TransactionId values. It now
matches the nearby GlobalVisCheckRemovableXid() function, which performs
the same check for callers that use TransactionId values.
Oversight in commit dc7420c2c9.
Discussion: https://postgr.es/m/CAH2-Wzmes12jFNDcVgpU89Vp=r6uLFrE-MT0fjSWGsE70UiNaA@mail.gmail.com
In a cluster having used CREATE INDEX CONCURRENTLY while having enabled
prepared transactions, queries that use the resulting index can silently
fail to find rows. Fix this for future CREATE INDEX CONCURRENTLY by
making it wait for prepared transactions like it waits for ordinary
transactions. This expands the VirtualTransactionId structure domain to
admit prepared transactions. It may be necessary to reindex to recover
from past occurrences. Back-patch to 9.5 (all supported versions).
Andrey Borodin, reviewed (in earlier versions) by Tom Lane and Michael
Paquier.
Discussion: https://postgr.es/m/2E712143-97F7-4890-B470-4A35142ABC82@yandex-team.ru
Thomas Munro
Robert Haas
Andres Freund
Michael Paquier
Amit Kapila
Peter Geoghegan
Tom Lane
David Rowley
Fujii Masao
Heikki Linnakangas
Peter Eisentraut
Alvaro Herrera
Etsuro Fujita
Tomas Vondra
John Naylor
Bruce Momjian
Alexander Korotkov
Noah Misch
Daniel Gustafsson
Andrew Dunstan
Magnus Hagander
Stephen Frost