This is the SQL standard-conforming variant of PostgreSQL's serial
columns. It fixes a few usability issues that serial columns have:
- CREATE TABLE / LIKE copies default but refers to same sequence
- cannot add/drop serialness with ALTER TABLE
- dropping default does not drop sequence
- need to grant separate privileges to sequence
- other slight weirdnesses because serial is some kind of special macro
Reviewed-by: Vitaly Burovoy <vitaly.burovoy@gmail.com>
copyObject() is declared to return void *, which allows easily assigning
the result independent of the input, but it loses all type checking.
If the compiler supports typeof or something similar, cast the result to
the input type. This creates a greater amount of type safety. In some
cases, where the result is assigned to a generic type such as Node * or
Expr *, new casts are now necessary, but in general casts are now
unnecessary in the normal case and indicate that something unusual is
happening.
Reviewed-by: Mark Dilger <hornschnorter@gmail.com>
Add support for explicitly declared statistic objects (CREATE
STATISTICS), allowing collection of statistics on more complex
combinations that individual table columns. Companion commands DROP
STATISTICS and ALTER STATISTICS ... OWNER TO / SET SCHEMA / RENAME are
added too. All this DDL has been designed so that more statistic types
can be added later on, such as multivariate most-common-values and
multivariate histograms between columns of a single table, leaving room
for permitting columns on multiple tables, too, as well as expressions.
This commit only adds support for collection of n-distinct coefficient
on user-specified sets of columns in a single table. This is useful to
estimate number of distinct groups in GROUP BY and DISTINCT clauses;
estimation errors there can cause over-allocation of memory in hashed
aggregates, for instance, so it's a worthwhile problem to solve. A new
special pseudo-type pg_ndistinct is used.
(num-distinct estimation was deemed sufficiently useful by itself that
this is worthwhile even if no further statistic types are added
immediately; so much so that another version of essentially the same
functionality was submitted by Kyotaro Horiguchi:
https://postgr.es/m/20150828.173334.114731693.horiguchi.kyotaro@lab.ntt.co.jp
though this commit does not use that code.)
Author: Tomas Vondra. Some code rework by Álvaro.
Reviewed-by: Dean Rasheed, David Rowley, Kyotaro Horiguchi, Jeff Janes,
Ideriha Takeshi
Discussion: https://postgr.es/m/543AFA15.4080608@fuzzy.czhttps://postgr.es/m/20170320190220.ixlaueanxegqd5gr@alvherre.pgsql
The warning about hash indexes not being write-ahead logged and their
use being discouraged has been removed. "snapshot too old" is now
supported for tables with hash indexes. Most importantly, barring
bugs, hash indexes will now be crash-safe and usable on standbys.
This commit doesn't yet add WAL consistency checking for hash
indexes, as we now have for other index types; a separate patch has
been submitted to cure that lack.
Amit Kapila, reviewed and slightly modified by me. The larger patch
series of which this is a part has been reviewed and tested by Álvaro
Herrera, Ashutosh Sharma, Mark Kirkwood, Jeff Janes, and Jesper
Pedersen.
Discussion: http://postgr.es/m/CAA4eK1JOBX=YU33631Qh-XivYXtPSALh514+jR8XeD7v+K3r_Q@mail.gmail.com
The problem with the original coding here is that we might receive (and
clear) a relcache invalidation signal for the target relation down inside
one of the index_open calls we're doing. Since the target is open, we
would not drop the relcache entry, just reset its rd_indexvalid and
rd_indexlist fields. But RelationGetIndexAttrBitmap() kept going, and
would eventually cache and return potentially-obsolete attribute bitmaps.
The case where this matters is where the inval signal was from a CREATE
INDEX CONCURRENTLY telling us about a new index on a formerly-unindexed
column. (In all other cases, the lock we hold on the target rel should
prevent any concurrent change in index state.) Even just returning the
stale attribute bitmap is not such a problem, because it shouldn't matter
during the transaction in which we receive the signal. What hurts is
caching the stale data, because it can survive into later transactions,
breaking CREATE INDEX CONCURRENTLY's expectation that later transactions
will not create new broken HOT chains. The upshot is that there's a window
for building corrupted indexes during CREATE INDEX CONCURRENTLY.
This patch fixes the problem by rechecking that the set of index OIDs
is still the same at the end of RelationGetIndexAttrBitmap() as it was
at the start. If not, we loop back and try again. That's a little
more than is strictly necessary to fix the bug --- in principle, we
could return the stale data but not cache it --- but it seems like a
bad idea on general principles for relcache to return data it knows
is stale.
There might be more hazards of the same ilk, or there might be a better
way to fix this one, but this patch definitely improves matters and seems
unlikely to make anything worse. So let's push it into today's releases
even as we continue to study the problem.
Pavan Deolasee and myself
Discussion: https://postgr.es/m/CABOikdM2MUq9cyZJi1KyLmmkCereyGp5JQ4fuwKoyKEde_mzkQ@mail.gmail.com
Commit 665d1fad9 introduced rd_pkindex, and made RelationGetIndexList
responsible for updating it, but didn't bother to fix
RelationGetIndexList's header comment to say so.
Split the existing CatalogUpdateIndexes into two different routines,
CatalogTupleInsert and CatalogTupleUpdate, which do both the heap
insert/update plus the index update. This removes over 300 lines of
boilerplate code all over src/backend/catalog/ and src/backend/commands.
The resulting code is much more pleasing to the eye.
Also, by encapsulating what happens in detail during an UPDATE, this
facilitates the upcoming WARM patch, which is going to add a few more
lines to the update case making the boilerplate even more boring.
The original CatalogUpdateIndexes is removed; there was only one use
left, and since it's just three lines, we can as well expand it in place
there. We could keep it, but WARM is going to break all the UPDATE
out-of-core callsites anyway, so there seems to be no benefit in doing
so.
Author: Pavan Deolasee
Discussion: https://www.postgr.es/m/CABOikdOcFYSZ4vA2gYfs=M2cdXzXX4qGHeEiW3fu9PCfkHLa2A@mail.gmail.com
Table partitioning is like table inheritance and reuses much of the
existing infrastructure, but there are some important differences.
The parent is called a partitioned table and is always empty; it may
not have indexes or non-inherited constraints, since those make no
sense for a relation with no data of its own. The children are called
partitions and contain all of the actual data. Each partition has an
implicit partitioning constraint. Multiple inheritance is not
allowed, and partitioning and inheritance can't be mixed. Partitions
can't have extra columns and may not allow nulls unless the parent
does. Tuples inserted into the parent are automatically routed to the
correct partition, so tuple-routing ON INSERT triggers are not needed.
Tuple routing isn't yet supported for partitions which are foreign
tables, and it doesn't handle updates that cross partition boundaries.
Currently, tables can be range-partitioned or list-partitioned. List
partitioning is limited to a single column, but range partitioning can
involve multiple columns. A partitioning "column" can be an
expression.
Because table partitioning is less general than table inheritance, it
is hoped that it will be easier to reason about properties of
partitions, and therefore that this will serve as a better foundation
for a variety of possible optimizations, including query planner
optimizations. The tuple routing based which this patch does based on
the implicit partitioning constraints is an example of this, but it
seems likely that many other useful optimizations are also possible.
Amit Langote, reviewed and tested by Robert Haas, Ashutosh Bapat,
Amit Kapila, Rajkumar Raghuwanshi, Corey Huinker, Jaime Casanova,
Rushabh Lathia, Erik Rijkers, among others. Minor revisions by me.
I found that half a dozen (nearly 5%) of our AllocSetContextCreate calls
had typos in the context-sizing parameters. While none of these led to
especially significant problems, they did create minor inefficiencies,
and it's now clear that expecting people to copy-and-paste those calls
accurately is not a great idea. Let's reduce the risk of future errors
by introducing single macros that encapsulate the common use-cases.
Three such macros are enough to cover all but two special-purpose contexts;
those two calls can be left as-is, I think.
While this patch doesn't in itself improve matters for third-party
extensions, it doesn't break anything for them either, and they can
gradually adopt the simplified notation over time.
In passing, change TopMemoryContext to use the default allocation
parameters. Formerly it could only be extended 8K at a time. That was
probably reasonable when this code was written; but nowadays we create
many more contexts than we did then, so that it's not unusual to have a
couple hundred K in TopMemoryContext, even without considering various
dubious code that sticks other things there. There seems no good reason
not to let it use growing blocks like most other contexts.
Back-patch to 9.6, mostly because that's still close enough to HEAD that
it's easy to do so, and keeping the branches in sync can be expected to
avoid some future back-patching pain. The bugs fixed by these changes
don't seem to be significant enough to justify fixing them further back.
Discussion: <21072.1472321324@sss.pgh.pa.us>
This patch provides a new implementation of the logic added by commit
137805f89 and later removed by 77ba61080. It differs from the original
primarily in expending much less effort per joinrel in large queries,
which it accomplishes by doing most of the matching work once per query not
once per joinrel. Hopefully, it's also less buggy and better commented.
The never-documented enable_fkey_estimates GUC remains gone.
There remains work to be done to make the selectivity estimates account
for nulls in FK referencing columns; but that was true of the original
patch as well. We may be able to address this point later in beta.
In the meantime, any error should be in the direction of overestimating
rather than underestimating joinrel sizes, which seems like the direction
we want to err in.
Tomas Vondra and Tom Lane
Discussion: <31041.1465069446@sss.pgh.pa.us>
As noted by Andres Freund, we'd accumulated quite a few similar functions
in clauses.c that examine all functions in an expression tree to see if
they satisfy some boolean test. Reduce the duplication by inventing a
function check_functions_in_node() that applies a simple callback function
to each SQL function OID appearing in a given expression node. This also
fixes some arguable oversights; for example, contain_mutable_functions()
did not check aggregate or window functions for mutability. I doubt that
that represents a live bug at the moment, because we don't really consider
mutability for aggregates; but it might someday be one.
I chose to put check_functions_in_node() in nodeFuncs.c because it seemed
like other modules might wish to use it in future. That in turn forced
moving set_opfuncid() et al into nodeFuncs.c, as the alternative was for
nodeFuncs.c to depend on optimizer/setrefs.c which didn't seem very clean.
In passing, teach contain_leaked_vars_walker() about a few more expression
node types it can safely look through, and improve the rather messy and
undercommented code in has_parallel_hazard_walker().
Discussion: <20160527185853.ziol2os2zskahl7v@alap3.anarazel.de>
Transmit the leader's temp-namespace state to workers. This is important
because without it, the workers do not really have the same search path
as the leader. For example, there is no good reason (and no extant code
either) to prevent a worker from executing a temp function that the
leader created previously; but as things stood it would fail to find the
temp function, and then either fail or execute the wrong function entirely.
We still prohibit a worker from creating a temp namespace on its own.
In effect, a worker can only see the session's temp namespace if the leader
had created it before starting the worker, which seems like the right
semantics.
Also, transmit the leader's BackendId to workers, and arrange for workers
to use that when determining the physical file path of a temp relation
belonging to their session. While the original intent was to prevent such
accesses entirely, there were a number of holes in that, notably in places
like dbsize.c which assume they can safely access temp rels of other
sessions anyway. We might as well get this right, as a small down payment
on someday allowing workers to access the leader's temp tables. (With
this change, directly using "MyBackendId" as a relation or buffer backend
ID is deprecated; you should use BackendIdForTempRelations() instead.
I left a couple of such uses alone though, as they're not going to be
reachable in parallel workers until we do something about localbuf.c.)
Move the thou-shalt-not-access-thy-leader's-temp-tables prohibition down
into localbuf.c, which is where it actually matters, instead of having it
in relation_open(). This amounts to recognizing that access to temp
tables' catalog entries is perfectly safe in a worker, it's only the data
in local buffers that is problematic.
Having done all that, we can get rid of the test in has_parallel_hazard()
that says that use of a temp table's rowtype is unsafe in parallel workers.
That test was unduly expensive, and if we really did need such a
prohibition, that was not even close to being a bulletproof guard for it.
(For example, any user-defined function executed in a parallel worker
might have attempted such access.)
This commit reverts 137805f89 as well as the associated commits 015e88942,
5306df283, and 68d704edb. We found multiple bugs in this feature, and
there was concern about possible planner slowdown (though to be fair,
exhibiting a very large slowdown proved difficult). The way forward
requires a considerable rewrite, which may or may not be possible to
accomplish in time for beta2. In my judgment reviewing the rewrite will
be easier to accomplish starting from a clean slate, so let's temporarily
revert what's there now. This also leaves us in a safe state if it turns
out to be necessary to postpone the rewrite to the next development cycle.
Discussion: <20160429102531.GA13701@huehner.biz>
Hash indexes are not WAL-logged, and so do not maintain the LSN of
index pages. Since the "snapshot too old" feature counts on
detecting error conditions using the LSN of a table and all indexes
on it, this makes it impossible to safely do early vacuuming on any
table with a hash index, so add this to the tests for whether the
xid used to vacuum a table can be adjusted based on
old_snapshot_threshold.
While at it, add a paragraph to the docs for old_snapshot_threshold
which specifically mentions this and other aspects of the feature
which may otherwise surprise users.
Problem reported and patch reviewed by Amit Kapila
Now indexes (but only B-tree for now) can contain "extra" column(s) which
doesn't participate in index structure, they are just stored in leaf
tuples. It allows to use index only scan by using single index instead
of two or more indexes.
Author: Anastasia Lubennikova with minor editorializing by me
Reviewers: David Rowley, Peter Geoghegan, Jeff Janes
This patch reduces pg_am to just two columns, a name and a handler
function. All the data formerly obtained from pg_am is now provided
in a C struct returned by the handler function. This is similar to
the designs we've adopted for FDWs and tablesample methods. There
are multiple advantages. For one, the index AM's support functions
are now simple C functions, making them faster to call and much less
error-prone, since the C compiler can now check function signatures.
For another, this will make it far more practical to define index access
methods in installable extensions.
A disadvantage is that SQL-level code can no longer see attributes
of index AMs; in particular, some of the crosschecks in the opr_sanity
regression test are no longer possible from SQL. We've addressed that
by adding a facility for the index AM to perform such checks instead.
(Much more could be done in that line, but for now we're content if the
amvalidate functions more or less replace what opr_sanity used to do.)
We might also want to expose some sort of reporting functionality, but
this patch doesn't do that.
Alexander Korotkov, reviewed by Petr Jelínek, and rather heavily
editorialized on by me.
While the in-core authentication mechanism doesn't need to access
pg_shseclabel at all, it's reasonable to think that an authentication
hook will want to look at the label for the role logging in, or for rows
in other catalogs used during the authentication phase of startup.
Catalog version bumped, because this changes the "is nailed" status for
pg_shseclabel.
Author: Adam Brightwell
In commit 5d1ff6bd55 I added some logic to
relcache.c to try to ensure that the regression tests would fail if we
made a mistake about which relations belong in the relcache init files.
I'm quite sure I tested that, but I must have done so only for the
non-shared-catalog case, because a report from Adam Brightwell showed that
the regression tests still pass just fine if we bollix the shared-catalog
init file in the way this code was supposed to catch. The reason is that
that file gets loaded before we do client authentication, so the WARNING
is not sent to the client, only to the postmaster log, where it's far too
easily missed.
The least Rube Goldbergian answer to this is to put an Assert(false)
after the elog(WARNING). That will certainly get developers' attention,
while not breaking production builds' ability to recover from corner
cases with similar symptoms.
Since this is only of interest to developers, there seems no need for
a back-patch, even though the previous commit went into all branches.
This refactors rewrite/rowsecurity.c to simplify the handling of the
default deny case (reducing the number of places where we check for and
add the default deny policy from three to one) by splitting up the
retrival of the policies from the application of them.
This also allowed us to do away with the policy_id field. A policy_name
field was added for WithCheckOption policies and is used in error
reporting, when available.
Patch by Dean Rasheed, with various mostly cosmetic changes by me.
Back-patch to 9.5 where RLS was introduced to avoid unnecessary
differences, since we're still in alpha, per discussion with Robert.
Formerly, we treated only portals created in the current subtransaction as
having failed during subtransaction abort. However, if the error occurred
while running a portal created in an outer subtransaction (ie, a cursor
declared before the last savepoint), that has to be considered broken too.
To allow reliable detection of which ones those are, add a bookkeeping
field to struct Portal that tracks the innermost subtransaction in which
each portal has actually been executed. (Without this, we'd end up
failing portals containing functions that had called the subtransaction,
thereby breaking plpgsql exception blocks completely.)
In addition, when we fail an outer-subtransaction Portal, transfer its
resources into the subtransaction's resource owner, so that they're
released early in cleanup of the subxact. This fixes a problem reported by
Jim Nasby in which a function executed in an outer-subtransaction cursor
could cause an Assert failure or crash by referencing a relation created
within the inner subtransaction.
The proximate cause of the Assert failure is that AtEOSubXact_RelationCache
assumed it could blow away a relcache entry without first checking that the
entry had zero refcount. That was a bad idea on its own terms, so add such
a check there, and to the similar coding in AtEOXact_RelationCache. This
provides an independent safety measure in case there are still ways to
provoke the situation despite the Portal-level changes.
This has been broken since subtransactions were invented, so back-patch
to all supported branches.
Tom Lane and Michael Paquier
Commit f3b5565dd4 was a couple of bricks shy
of a load; specifically, it missed putting pg_trigger_tgrelid_tgname_index
into the relcache init file, because that index is not used by any
syscache. However, we have historically nailed that index into cache for
performance reasons. The upshot was that load_relcache_init_file always
decided that the init file was busted and silently ignored it, resulting
in a significant hit to backend startup speed.
To fix, reinstantiate RelationIdIsInInitFile() as a wrapper around
RelationSupportsSysCache(), which can know about additional relations
that should be in the init file despite being unknown to syscache.c.
Also install some guards against future mistakes of this type: make
write_relcache_init_file Assert that all nailed relations get written to
the init file, and make load_relcache_init_file emit a WARNING if it takes
the "wrong number of nailed relations" exit path. Now that we remove the
init files during postmaster startup, that case should never occur in the
field, even if we are starting a minor-version update that added or removed
rels from the nailed set. So the warning shouldn't ever be seen by end
users, but it will show up in the regression tests if somebody breaks this
logic.
Back-patch to all supported branches, like the previous commit.
When we invalidate the relcache entry for a system catalog or index, we
must also delete the relcache "init file" if the init file contains a copy
of that rel's entry. The old way of doing this relied on a specially
maintained list of the OIDs of relations present in the init file: we made
the list either when reading the file in, or when writing the file out.
The problem is that when writing the file out, we included only rels
present in our local relcache, which might have already suffered some
deletions due to relcache inval events. In such cases we correctly decided
not to overwrite the real init file with incomplete data --- but we still
used the incomplete initFileRelationIds list for the rest of the current
session. This could result in wrong decisions about whether the session's
own actions require deletion of the init file, potentially allowing an init
file created by some other concurrent session to be left around even though
it's been made stale.
Since we don't support changing the schema of a system catalog at runtime,
the only likely scenario in which this would cause a problem in the field
involves a "vacuum full" on a catalog concurrently with other activity, and
even then it's far from easy to provoke. Remarkably, this has been broken
since 2002 (in commit 7863404417), but we had
never seen a reproducible test case until recently. If it did happen in
the field, the symptoms would probably involve unexpected "cache lookup
failed" errors to begin with, then "could not open file" failures after the
next checkpoint, as all accesses to the affected catalog stopped working.
Recovery would require manually removing the stale "pg_internal.init" file.
To fix, get rid of the initFileRelationIds list, and instead consult
syscache.c's list of relations used in catalog caches to decide whether a
relation is included in the init file. This should be a tad more efficient
anyway, since we're replacing linear search of a list with ~100 entries
with a binary search. It's a bit ugly that the init file contents are now
so directly tied to the catalog caches, but in practice that won't make
much difference.
Back-patch to all supported branches.
The USING policies were not being checked for differences as the same
policy was being passed in to both sides of the equal(). This could
result in backends not realizing that a policy had been changed, if
none of the other attributes had been changed.
Fix by passing to equal() the policy1 and policy2 using quals for
comparison.
No need to back-patch as this is not yet released. Noticed while
testing changes to RLS proposed by Dean Rasheed.
Previously, CHECK constraints of the same scope were checked in whatever
order they happened to be read from pg_constraint. (Usually, but not
reliably, this would be creation order for domain constraints and reverse
creation order for table constraints, because of differing implementation
details.) Nondeterministic results of this sort are problematic at least
for testing purposes, and in discussion it was agreed to be a violation of
the principle of least astonishment. Therefore, borrow the principle
already established for triggers, and apply such checks in name order
(using strcmp() sort rules). This lets users control the check order
if they have a mind to.
Domain CHECK constraints still follow the rule of checking lower nested
domains' constraints first; the name sort only applies to multiple
constraints attached to the same domain.
In passing, I failed to resist the temptation to wordsmith a bit in
create_domain.sgml.
Apply to HEAD only, since this could result in a behavioral change in
existing applications, and the potential regression test failures have
not actually been observed in our buildfarm.
Fix unsafe coding around PG_TRY in RelationBuildRowSecurity: can't change
a variable inside PG_TRY and then use it in PG_CATCH without marking it
"volatile". In this case though it seems saner to avoid that by doing
a single assignment before entering the TRY block.
I started out just intending to fix that, but the more I looked at the
row-security code the more distressed I got. This patch also fixes
incorrect construction of the RowSecurityPolicy cache entries (there was
not sufficient care taken to copy pass-by-ref data into the cache memory
context) and a whole bunch of sloppiness around the definition and use of
pg_policy.polcmd. You can't use nulls in that column because initdb will
mark it NOT NULL --- and I see no particular reason why a null entry would
be a good idea anyway, so changing initdb's behavior is not the right
answer. The internal value of '\0' wouldn't be suitable in a "char" column
either, so after a bit of thought I settled on using '*' to represent ALL.
Chasing those changes down also revealed that somebody wasn't paying
attention to what the underlying values of ACL_UPDATE_CHR etc really were,
and there was a great deal of lackadaiscalness in the catalogs.sgml
documentation for pg_policy and pg_policies too.
This doesn't pretend to be a complete code review for the row-security
stuff, it just fixes the things that were in my face while dealing with
the bugs in RelationBuildRowSecurity.
When using a historic snapshot for logical decoding it can validly
happen that a relation that's in the relcache isn't visible to that
historic snapshot. E.g. if a newly created relation is referenced in
the query that uses the SQL interface for logical decoding and a
sinval reset occurs.
The earlier commit that fixed the error handling for that corner case
already improves the situation as a ERROR is better than hitting an
assertion... But it's obviously not good enough. So additionally
allow that case without an error if a historic snapshot is set up -
that won't allow an invalid entry to stay in the cache because it's a)
already marked invalid and will thus be rebuilt during the next access
b) the syscaches will be reset at the end of decoding.
There might be prettier solutions to handle this case, but all that we
could think of so far end up being much more complex than this quite
simple fix.
This fixes the assertion failures reported by the buildfarm (markhor,
tick, leech) after the introduction of new regression tests in
89fd41b390. The failure there weren't actually directly caused by
CLOBBER_CACHE_ALWAYS but the extraordinary long runtimes due to it
lead to sinval resets triggering the behaviour.
Discussion: 22459.1418656530@sss.pgh.pa.us
Backpatch to 9.4 where logical decoding was introduced.
The corner case where a relcache invalidation tried to rebuild the
entry for a referenced relation but couldn't find it in the catalog
wasn't correct.
The code tried to RelationCacheDelete/RelationDestroyRelation the
entry. That didn't work when assertions are enabled because the latter
contains an assertion ensuring the refcount is zero. It's also more
generally a bad idea, because by virtue of being referenced somebody
might actually look at the entry, which is possible if the error is
trapped and handled via a subtransaction abort.
Instead just error out, without deleting the entry. As the entry is
marked invalid, the worst that can happen is that the invalid (and at
some point unused) entry lingers in the relcache.
Discussion: 22459.1418656530@sss.pgh.pa.us
There should be no way to hit this case < 9.4 where logical decoding
introduced a bug that can hit this. But since the code for handling
the corner case is there it should do something halfway sane, so
backpatch all the the way back. The logical decoding bug will be
handled in a separate commit.
Previously, if you wanted anything besides C-string hash keys, you had to
specify a custom hashing function to hash_create(). Nearly all such
callers were specifying tag_hash or oid_hash; which is tedious, and rather
error-prone, since a caller could easily miss the opportunity to optimize
by using hash_uint32 when appropriate. Replace this with a design whereby
callers using simple binary-data keys just specify HASH_BLOBS and don't
need to mess with specific support functions. hash_create() itself will
take care of optimizing when the key size is four bytes.
This nets out saving a few hundred bytes of code space, and offers
a measurable performance improvement in tidbitmap.c (which was not
exploiting the opportunity to use hash_uint32 for its 4-byte keys).
There might be some wins elsewhere too, I didn't analyze closely.
In future we could look into offering a similar optimized hashing function
for 8-byte keys. Under this design that could be done in a centralized
and machine-independent fashion, whereas getting it right for keys of
platform-dependent sizes would've been notationally painful before.
For the moment, the old way still works fine, so as not to break source
code compatibility for loadable modules. Eventually we might want to
remove tag_hash and friends from the exported API altogether, since there's
no real need for them to be explicitly referenced from outside dynahash.c.
Teodor Sigaev and Tom Lane
As pointed out by Robert, we should really have named pg_rowsecurity
pg_policy, as the objects stored in that catalog are policies. This
patch fixes that and updates the column names to start with 'pol' to
match the new catalog name.
The security consideration for COPY with row level security, also
pointed out by Robert, has also been addressed by remembering and
re-checking the OID of the relation initially referenced during COPY
processing, to make sure it hasn't changed under us by the time we
finish planning out the query which has been built.
Robert and Alvaro also commented on missing OCLASS and OBJECT entries
for POLICY (formerly ROWSECURITY or POLICY, depending) in various
places. This patch fixes that too, which also happens to add the
ability to COMMENT on policies.
In passing, attempt to improve the consistency of messages, comments,
and documentation as well. This removes various incarnations of
'row-security', 'row-level security', 'Row-security', etc, in favor
of 'policy', 'row level security' or 'row_security' as appropriate.
Happy Thanksgiving!
Buildfarm members with CLOBBER_CACHE_ALWAYS advised us that commit
85b506bbfc was mistaken in setting the relpersistence value of the
index directly in the relcache entry, within reindex_index. The reason
for the failure is that an invalidation message that comes after mucking
with the relcache entry directly, but before writing it to the catalogs,
would cause the entry to become rebuilt in place from catalogs with the
old contents, losing the update.
Fix by passing the correct persistence value to
RelationSetNewRelfilenode instead; this routine also writes the updated
tuple to pg_class, avoiding the problem. Suggested by Tom Lane.
This removes ATChangeIndexesPersistence() introduced by f41872d0c1
which was too ugly to live for long. Instead, the correct persistence
marking is passed all the way down to reindex_index, so that the
transient relation built to contain the index relfilenode can
get marked correctly right from the start.
Author: Fabrízio de Royes Mello
Review and editorialization by Michael Paquier
and Álvaro Herrera
The initial patch for RLS mistakenly included headers associated with
the executor and planner bits in rewrite/rowsecurity.h. Per policy and
general good sense, executor headers should not be included in planner
headers or vice versa.
The include of execnodes.h was a mistaken holdover from previous
versions, while the include of relation.h was used for Relation's
definition, which should have been coming from utils/relcache.h. This
patch cleans these issues up, adds comments to the RowSecurityPolicy
struct and the RowSecurityConfigType enum, and changes Relation->rsdesc
to Relation->rd_rsdesc to follow Relation field naming convention.
Additionally, utils/rel.h was including rewrite/rowsecurity.h, which
wasn't a great idea since that was pulling in things not really needed
in utils/rel.h (which gets included in quite a few places). Instead,
use 'struct RowSecurityDesc' for the rd_rsdesc field and add comments
explaining why.
Lastly, add an include into access/nbtree/nbtsort.c for
utils/sortsupport.h, which was evidently missed due to the above mess.
Pointed out by Tom in 16970.1415838651@sss.pgh.pa.us; note that the
concerns regarding a similar situation in the custom-path commit still
need to be addressed.
xlog.c is huge, this makes it a little bit smaller, which is nice. Functions
related to putting together the WAL record are in xloginsert.c, and the
lower level stuff for managing WAL buffers and such are in xlog.c.
Also move the definition of XLogRecord to a separate header file. This
causes churn in the #includes of all the files that write WAL records, and
redo routines, but it avoids pulling in xlog.h into most places.
Reviewed by Michael Paquier, Alvaro Herrera, Andres Freund and Amit Kapila.
Andres pointed out that there was an extra ';' in equalPolicies, which
made me realize that my prior testing with CLOBBER_CACHE_ALWAYS was
insufficient (it didn't always catch the issue, just most of the time).
Thanks to that, a different issue was discovered, specifically in
equalRSDescs. This change corrects eqaulRSDescs to return 'true' once
all policies have been confirmed logically identical. After stepping
through both functions to ensure correct behavior, I ran this for
about 12 hours of CLOBBER_CACHE_ALWAYS runs of the regression tests
with no failures.
In addition, correct a few typos in the documentation which were pointed
out by Thom Brown (thanks!) and improve the policy documentation further
by adding a flushed out usage example based on a unix passwd file.
Lastly, clean up a few comments in the regression tests and pg_dump.h.
Buildfarm member tick identified an issue where the policies in the
relcache for a relation were were being replaced underneath a running
query, leading to segfaults while processing the policies to be added
to a query. Similar to how TupleDesc RuleLocks are handled, add in a
equalRSDesc() function to check if the policies have actually changed
and, if not, swap back the rsdesc field (using the original instead of
the temporairly built one; the whole structure is swapped and then
specific fields swapped back). This now passes a CLOBBER_CACHE_ALWAYS
for me and should resolve the buildfarm error.
In addition to addressing this, add a new chapter in Data Definition
under Privileges which explains row security and provides examples of
its usage, change \d to always list policies (even if row security is
disabled- but note that it is disabled, or enabled with no policies),
rework check_role_for_policy (it really didn't need the entire policy,
but it did need to be using has_privs_of_role()), and change the field
in pg_class to relrowsecurity from relhasrowsecurity, based on
Heikki's suggestion. Also from Heikki, only issue SET ROW_SECURITY in
pg_restore when talking to a 9.5+ server, list Bypass RLS in \du, and
document --enable-row-security options for pg_dump and pg_restore.
Lastly, fix a number of minor whitespace and typo issues from Heikki,
Dimitri, add a missing #include, per Peter E, fix a few minor
variable-assigned-but-not-used and resource leak issues from Coverity
and add tab completion for role attribute bypassrls as well.
Building on the updatable security-barrier views work, add the
ability to define policies on tables to limit the set of rows
which are returned from a query and which are allowed to be added
to a table. Expressions defined by the policy for filtering are
added to the security barrier quals of the query, while expressions
defined to check records being added to a table are added to the
with-check options of the query.
New top-level commands are CREATE/ALTER/DROP POLICY and are
controlled by the table owner. Row Security is able to be enabled
and disabled by the owner on a per-table basis using
ALTER TABLE .. ENABLE/DISABLE ROW SECURITY.
Per discussion, ROW SECURITY is disabled on tables by default and
must be enabled for policies on the table to be used. If no
policies exist on a table with ROW SECURITY enabled, a default-deny
policy is used and no records will be visible.
By default, row security is applied at all times except for the
table owner and the superuser. A new GUC, row_security, is added
which can be set to ON, OFF, or FORCE. When set to FORCE, row
security will be applied even for the table owner and superusers.
When set to OFF, row security will be disabled when allowed and an
error will be thrown if the user does not have rights to bypass row
security.
Per discussion, pg_dump sets row_security = OFF by default to ensure
that exports and backups will have all data in the table or will
error if there are insufficient privileges to bypass row security.
A new option has been added to pg_dump, --enable-row-security, to
ask pg_dump to export with row security enabled.
A new role capability, BYPASSRLS, which can only be set by the
superuser, is added to allow other users to be able to bypass row
security using row_security = OFF.
Many thanks to the various individuals who have helped with the
design, particularly Robert Haas for his feedback.
Authors include Craig Ringer, KaiGai Kohei, Adam Brightwell, Dean
Rasheed, with additional changes and rework by me.
Reviewers have included all of the above, Greg Smith,
Jeff McCormick, and Robert Haas.
CheckConstraintFetch() leaked a cstring in the caller's context for each
CHECK constraint expression it copied into the relcache. Ordinarily that
isn't problematic, but it can be during CLOBBER_CACHE testing because so
many reloads can happen during a single query; so complicate the code
slightly to allow freeing the cstring after use. Per testing on buildfarm
member barnacle.
This is exactly like the leak fixed in AttrDefaultFetch() by commit
078b2ed291. (Yes, this time I did look for
other instances of the same coding pattern :-(.) Like that patch, no
back-patch, since it seems unlikely that there's any problem except under
very artificial test conditions.
BTW, it strikes me that both of these places would require further work
comparable to commit ab8c84db2f, if we ever
supported defaults or check constraints on system catalogs: they both
assume they are copying into an empty relcache data structure, and that
conceivably wouldn't be the case during recursive reloading of a system
catalog. This does not seem worth worrying about for the moment, since
there is no near-term prospect of supporting any such thing. So I'll
just note the possibility for the archives' sake.
When replacing rd_indexlist, rd_indexattr, etc, we neglected to pfree any
old value of these fields. Under ordinary circumstances, the old value
would always be NULL, so this seemed reasonable enough. However, in cases
where we're rebuilding a system catalog's relcache entry and another cache
flush occurs on that same catalog meanwhile, it's possible for the field to
not be NULL when we return to the outer level, because we already refilled
it while recovering from the inner flush. This leads to a fairly small
session-lifespan leak in CacheMemoryContext. In real-world usage the leak
would be too small to notice; but in testing with CLOBBER_CACHE_RECURSIVELY
the leakage can add up to the point of causing OOM failures, as reported by
Tomas Vondra.
The issue has been there a long time, but it only seems worth fixing in
HEAD, like the previous fix in this area (commit 078b2ed291).
That's what I get for not fully retesting the final version of the patch.
The replace_allowed cross-check needs an additional special case for
bootstrapping.
RelationCacheInsert() ignored the possibility that hash_search(HASH_ENTER)
might find a hashtable entry already present for the same OID. However,
that can in fact occur during recursive relcache load scenarios. When it
did happen, we overwrote the pointer to the pre-existing Relation, causing
a session-lifespan leakage of that entire structure. As far as is known,
the pre-existing Relation would always have reference count zero by the
time we arrive back at the outer insertion, so add code that deletes the
pre-existing Relation if so. If by some chance its refcount is positive,
elog a WARNING and allow the pre-existing Relation to be leaked as before.
Also, AttrDefaultFetch() was sloppy about leaking the cstring form of the
pg_attrdef.adbin value it's copying into the relcache structure. This is
only a query-lifespan leakage, and normally not very significant, but it
adds up during CLOBBER_CACHE testing.
These bugs are of very ancient vintage, but I'll refrain from back-patching
since there's no evidence that these leaks amount to anything in ordinary
usage.
rd_replidindex should be managed the same as rd_oidindex, and rd_keyattr
and rd_idattr should be managed like rd_indexattr. Omissions in this area
meant that the bitmapsets computed for rd_keyattr and rd_idattr would be
leaked during any relcache flush, resulting in a slow but permanent leak in
CacheMemoryContext. There was also a tiny probability of relcache entry
corruption if we ran out of memory at just the wrong point in
RelationGetIndexAttrBitmap. Otherwise, the fields were not zeroed where
expected, which would not bother the code any AFAICS but could greatly
confuse anyone examining the relcache entry while debugging.
Also, create an API function RelationGetReplicaIndex rather than letting
non-relcache code be intimate with the mechanisms underlying caching of
that value (we won't even mention the memory leak there).
Also, fix a relcache flush hazard identified by Andres Freund:
RelationGetIndexAttrBitmap must not assume that rd_replidindex stays valid
across index_open.
The aspects of this involving rd_keyattr date back to 9.3, so back-patch
those changes.
Commit a730183926 created rather a mess by
putting dependencies on backend-only include files into include/common.
We really shouldn't do that. To clean it up:
* Move TABLESPACE_VERSION_DIRECTORY back to its longtime home in
catalog/catalog.h. We won't consider this symbol part of the FE/BE API.
* Push enum ForkNumber from relfilenode.h into relpath.h. We'll consider
relpath.h as the source of truth for fork numbers, since relpath.c was
already partially serving that function, and anyway relfilenode.h was
kind of a random place for that enum.
* So, relfilenode.h now includes relpath.h rather than vice-versa. This
direction of dependency is fine. (That allows most, but not quite all,
of the existing explicit #includes of relpath.h to go away again.)
* Push forkname_to_number from catalog.c to relpath.c, just to centralize
fork number stuff a bit better.
* Push GetDatabasePath from catalog.c to relpath.c; it was rather odd
that the previous commit didn't keep this together with relpath().
* To avoid needing relfilenode.h in common/, redefine the underlying
function (now called GetRelationPath) as taking separate OID arguments,
and make the APIs using RelFileNode or RelFileNodeBackend into macro
wrappers. (The macros have a potential multiple-eval risk, but none of
the existing call sites have an issue with that; one of them had such a
risk already anyway.)
* Fix failure to follow the directions when "init" fork type was added;
specifically, the errhint in forkname_to_number wasn't updated, and neither
was the SGML documentation for pg_relation_size().
* Fix tablespace-path-too-long check in CreateTableSpace() to account for
fork-name component of maximum-length pathnames. This requires putting
FORKNAMECHARS into a header file, but it was rather useless (and
actually unreferenced) where it was.
The last couple of items are potentially back-patchable bug fixes,
if anyone is sufficiently excited about them; but personally I'm not.
Per a gripe from Christoph Berg about how include/common wasn't
self-contained.
VALIDATE CONSTRAINT
CLUSTER ON
SET WITHOUT CLUSTER
ALTER COLUMN SET STATISTICS
ALTER COLUMN SET ()
ALTER COLUMN RESET ()
All other sub-commands use AccessExclusiveLock
Simon Riggs and Noah Misch
Reviews by Robert Haas and Andres Freund
This feature, building on previous commits, allows the write-ahead log
stream to be decoded into a series of logical changes; that is,
inserts, updates, and deletes and the transactions which contain them.
It is capable of handling decoding even across changes to the schema
of the effected tables. The output format is controlled by a
so-called "output plugin"; an example is included. To make use of
this in a real replication system, the output plugin will need to be
modified to produce output in the format appropriate to that system,
and to perform filtering.
Currently, information can be extracted from the logical decoding
system only via SQL; future commits will add the ability to stream
changes via walsender.
Andres Freund, with review and other contributions from many other
people, including Álvaro Herrera, Abhijit Menon-Sen, Peter Gheogegan,
Kevin Grittner, Robert Haas, Heikki Linnakangas, Fujii Masao, Abhijit
Menon-Sen, Michael Paquier, Simon Riggs, Craig Ringer, and Steve
Singer.
We may process relcache flush requests during transaction startup or
shutdown. In general it's not terribly safe to do catalog access at those
times, so the code's habit of trying to immediately revalidate unflushable
relcache entries is risky. Although there are no field trouble reports
that are positively traceable to this, we have been able to demonstrate
failure of the assertions recently added in RelationIdGetRelation() and
SearchCatCache(). On the other hand, it seems safe to just postpone
revalidation of the cache entry until we're inside a valid transaction.
The one case where this is questionable is where we're exiting a
subtransaction and the outer transaction is holding the relcache entry open
--- but if we made any significant changes to the rel inside such a
subtransaction, we've got problems anyway. There are mechanisms in place
to prevent that (to wit, locks for cross-session cases and
CheckTableNotInUse() for intra-session cases), so let's trust to those
mechanisms to keep us out of trouble.
Commit 42c80c696e added an
Assert(IsTransactionState()) in SearchCatCache(), to catch
any code that thought it could do a catcache lookup outside
transactions. Extend the same idea to relcache lookups.
When wal_level=logical, we'll log columns from the old tuple as
configured by the REPLICA IDENTITY facility added in commit
07cacba983. This makes it possible
a properly-configured logical replication solution to correctly
follow table updates even if they change the chosen key columns,
or, with REPLICA IDENTITY FULL, even if the table has no key at
all. Note that updates which do not modify the replica identity
column won't log anything extra, making the choice of a good key
(i.e. one that will rarely be changed) important to performance
when wal_level=logical is configured.
Each insert, update, or delete to a catalog table will also log
the CMIN and/or CMAX values of stamped by the current transaction.
This is necessary because logical decoding will require access to
historical snapshots of the catalog in order to decode some data
types, and the CMIN/CMAX values that we may need in order to judge
row visibility may have been overwritten by the time we need them.
Andres Freund, reviewed in various versions by myself, Heikki
Linnakangas, KONDO Mitsumasa, and many others.
Pending patches for logical replication will use this to determine
which columns of a tuple ought to be considered as its candidate key.
Andres Freund, with minor, mostly cosmetic adjustments by me
Commit 95ef6a3448 removed the
ability to create rules on an individual column as of 7.3, but
left some residual code which has since been useless. This cleans
up that dead code without any change in behavior other than
dropping the useless column from the catalog.
SnapshotNow scans have the undesirable property that, in the face of
concurrent updates, the scan can fail to see either the old or the new
versions of the row. In many cases, we work around this by requiring
DDL operations to hold AccessExclusiveLock on the object being
modified; in some cases, the existing locking is inadequate and random
failures occur as a result. This commit doesn't change anything
related to locking, but will hopefully pave the way to allowing lock
strength reductions in the future.
The major issue has held us back from making this change in the past
is that taking an MVCC snapshot is significantly more expensive than
using a static special snapshot such as SnapshotNow. However, testing
of various worst-case scenarios reveals that this problem is not
severe except under fairly extreme workloads. To mitigate those
problems, we avoid retaking the MVCC snapshot for each new scan;
instead, we take a new snapshot only when invalidation messages have
been processed. The catcache machinery already requires that
invalidation messages be sent before releasing the related heavyweight
lock; else other backends might rely on locally-cached data rather
than scanning the catalog at all. Thus, making snapshot reuse
dependent on the same guarantees shouldn't break anything that wasn't
already subtly broken.
Patch by me. Review by Michael Paquier and Andres Freund.
Previously this state was represented by whether the view's disk file had
zero or nonzero size, which is problematic for numerous reasons, since it's
breaking a fundamental assumption about heap storage. This was done to
allow unlogged matviews to revert to unpopulated status after a crash
despite our lack of any ability to update catalog entries post-crash.
However, this poses enough risk of future problems that it seems better to
not support unlogged matviews until we can find another way. Accordingly,
revert that choice as well as a number of existing kluges forced by it
in favor of creating a pg_class.relispopulated flag column.
The intent was that being populated would, long term, be just one
of the conditions which could affect whether a matview was
scannable; being populated should be necessary but not always
sufficient to scan the relation. Since only CREATE and REFRESH
currently determine the scannability, names and comments
accidentally conflated these concepts, leading to confusion.
Also add missing locking for the SQL function which allows a
test for scannability, and fix a modularity violatiion.
Per complaints from Tom Lane, although its not clear that these
will satisfy his concerns. Hopefully this will at least better
frame the discussion.
This saves several catalog lookups per reference. It's not all that
exciting right now, because we'd managed to minimize the number of places
that need to fetch the data; but the upcoming writable-foreign-tables patch
needs this info in a lot more places.
A materialized view has a rule just like a view and a heap and
other physical properties like a table. The rule is only used to
populate the table, references in queries refer to the
materialized data.
This is a minimal implementation, but should still be useful in
many cases. Currently data is only populated "on demand" by the
CREATE MATERIALIZED VIEW and REFRESH MATERIALIZED VIEW statements.
It is expected that future releases will add incremental updates
with various timings, and that a more refined concept of defining
what is "fresh" data will be developed. At some point it may even
be possible to have queries use a materialized in place of
references to underlying tables, but that requires the other
above-mentioned features to be working first.
Much of the documentation work by Robert Haas.
Review by Noah Misch, Thom Brown, Robert Haas, Marko Tiikkaja
Security review by KaiGai Kohei, with a decision on how best to
implement sepgsql still pending.
This enables non-backend code, such as pg_xlogdump, to use it easily.
The previous location, in src/backend/catalog/catalog.c, made that
essentially impossible because that file depends on many backend-only
facilities; so this needs to live separately.
This patch addresses the problem that applications currently have to
extract object names from possibly-localized textual error messages,
if they want to know for example which index caused a UNIQUE_VIOLATION
failure. It adds new error message fields to the wire protocol, which
can carry the name of a table, table column, data type, or constraint
associated with the error. (Since the protocol spec has always instructed
clients to ignore unrecognized field types, this should not create any
compatibility problem.)
Support for providing these new fields has been added to just a limited set
of error reports (mainly, those in the "integrity constraint violation"
SQLSTATE class), but we will doubtless add them to more calls in future.
Pavel Stehule, reviewed and extensively revised by Peter Geoghegan, with
additional hacking by Tom Lane.
This patch introduces two additional lock modes for tuples: "SELECT FOR
KEY SHARE" and "SELECT FOR NO KEY UPDATE". These don't block each
other, in contrast with already existing "SELECT FOR SHARE" and "SELECT
FOR UPDATE". UPDATE commands that do not modify the values stored in
the columns that are part of the key of the tuple now grab a SELECT FOR
NO KEY UPDATE lock on the tuple, allowing them to proceed concurrently
with tuple locks of the FOR KEY SHARE variety.
Foreign key triggers now use FOR KEY SHARE instead of FOR SHARE; this
means the concurrency improvement applies to them, which is the whole
point of this patch.
The added tuple lock semantics require some rejiggering of the multixact
module, so that the locking level that each transaction is holding can
be stored alongside its Xid. Also, multixacts now need to persist
across server restarts and crashes, because they can now represent not
only tuple locks, but also tuple updates. This means we need more
careful tracking of lifetime of pg_multixact SLRU files; since they now
persist longer, we require more infrastructure to figure out when they
can be removed. pg_upgrade also needs to be careful to copy
pg_multixact files over from the old server to the new, or at least part
of multixact.c state, depending on the versions of the old and new
servers.
Tuple time qualification rules (HeapTupleSatisfies routines) need to be
careful not to consider tuples with the "is multi" infomask bit set as
being only locked; they might need to look up MultiXact values (i.e.
possibly do pg_multixact I/O) to find out the Xid that updated a tuple,
whereas they previously were assured to only use information readily
available from the tuple header. This is considered acceptable, because
the extra I/O would involve cases that would previously cause some
commands to block waiting for concurrent transactions to finish.
Another important change is the fact that locking tuples that have
previously been updated causes the future versions to be marked as
locked, too; this is essential for correctness of foreign key checks.
This causes additional WAL-logging, also (there was previously a single
WAL record for a locked tuple; now there are as many as updated copies
of the tuple there exist.)
With all this in place, contention related to tuples being checked by
foreign key rules should be much reduced.
As a bonus, the old behavior that a subtransaction grabbing a stronger
tuple lock than the parent (sub)transaction held on a given tuple and
later aborting caused the weaker lock to be lost, has been fixed.
Many new spec files were added for isolation tester framework, to ensure
overall behavior is sane. There's probably room for several more tests.
There were several reviewers of this patch; in particular, Noah Misch
and Andres Freund spent considerable time in it. Original idea for the
patch came from Simon Riggs, after a problem report by Joel Jacobson.
Most code is from me, with contributions from Marti Raudsepp, Alexander
Shulgin, Noah Misch and Andres Freund.
This patch was discussed in several pgsql-hackers threads; the most
important start at the following message-ids:
AANLkTimo9XVcEzfiBR-ut3KVNDkjm2Vxh+t8kAmWjPuv@mail.gmail.com1290721684-sup-3951@alvh.no-ip.org1294953201-sup-2099@alvh.no-ip.org1320343602-sup-2290@alvh.no-ip.org1339690386-sup-8927@alvh.no-ip.org4FE5FF020200002500048A3D@gw.wicourts.gov4FEAB90A0200002500048B7D@gw.wicourts.gov
AtEOXact_RelationCache() scanned the entire relation cache at the end of
any transaction that created a new relation or assigned a new relfilenode.
Thus, clients such as pg_restore had an O(N^2) performance problem that
would start to be noticeable after creating 10000 or so tables. Since
typically only a small number of relcache entries need any cleanup, we
can fix this by keeping a small list of their OIDs and doing hash_searches
for them. We fall back to the full-table scan if the list overflows.
Ideally, the maximum list length would be set at the point where N
hash_searches would cost just less than the full-table scan. Some quick
experimentation says that point might be around 50-100; I (tgl)
conservatively set MAX_EOXACT_LIST = 32. For the case that we're worried
about here, which is short single-statement transactions, it's unlikely
there would ever be more than about a dozen list entries anyway; so it's
probably not worth being too tense about the value.
We could avoid the hash_searches by instead keeping the target relcache
entries linked into a list, but that would be noticeably more complicated
and bug-prone because of the need to maintain such a list in the face of
relcache entry drops. Since a relcache entry can only need such cleanup
after a somewhat-heavyweight filesystem operation, trying to save a
hash_search per cleanup doesn't seem very useful anyway --- it's the scan
over all the not-needing-cleanup entries that we wish to avoid here.
Jeff Janes, reviewed and tweaked a bit by Tom Lane
Teach RelationCacheInvalidate() to keep rd_newRelfilenodeSubid across rel cache
message overflows, so that behaviour is now fully deterministic.
Noah Misch
During crash recovery, we remove disk files belonging to temporary tables,
but the system catalog entries for such tables are intentionally not
cleaned up right away. Instead, the first backend that uses a temp schema
is expected to clean out any leftover objects therein. This approach
requires that we be careful to ignore leftover temp tables (since any
actual access attempt would fail), *even if their BackendId matches our
session*, if we have not yet established use of the session's corresponding
temp schema. That worked fine in the past, but was broken by commit
debcec7dc3 which incorrectly removed the
rd_islocaltemp relcache flag. Put it back, and undo various changes
that substituted tests like "rel->rd_backend == MyBackendId" for use
of a state-aware flag. Per trouble report from Heikki Linnakangas.
Back-patch to 9.1 where the erroneous change was made. In the back
branches, be careful to add rd_islocaltemp in a spot in the struct that
was alignment padding before, so as not to break existing add-on code.
Commit 8cb53654db, which introduced DROP
INDEX CONCURRENTLY, managed to break CREATE INDEX CONCURRENTLY via a poor
choice of catalog state representation. The pg_index state for an index
that's reached the final pre-drop stage was the same as the state for an
index just created by CREATE INDEX CONCURRENTLY. This meant that the
(necessary) change to make RelationGetIndexList ignore about-to-die indexes
also made it ignore freshly-created indexes; which is catastrophic because
the latter do need to be considered in HOT-safety decisions. Failure to
do so leads to incorrect index entries and subsequently wrong results from
queries depending on the concurrently-created index.
To fix, add an additional boolean column "indislive" to pg_index, so that
the freshly-created and about-to-die states can be distinguished. (This
change obviously is only possible in HEAD. This patch will need to be
back-patched, but in 9.2 we'll use a kluge consisting of overloading the
formerly-impossible state of indisvalid = true and indisready = false.)
In addition, change CREATE/DROP INDEX CONCURRENTLY so that the pg_index
flag changes they make without exclusive lock on the index are made via
heap_inplace_update() rather than a normal transactional update. The
latter is not very safe because moving the pg_index tuple could result in
concurrent SnapshotNow scans finding it twice or not at all, thus possibly
resulting in index corruption. This is a pre-existing bug in CREATE INDEX
CONCURRENTLY, which was copied into the DROP code.
In addition, fix various places in the code that ought to check to make
sure that the indexes they are manipulating are valid and/or ready as
appropriate. These represent bugs that have existed since 8.2, since
a failed CREATE INDEX CONCURRENTLY could leave a corrupt or invalid
index behind, and we ought not try to do anything that might fail with
such an index.
Also fix RelationReloadIndexInfo to ensure it copies all the pg_index
columns that are allowed to change after initial creation. Previously we
could have been left with stale values of some fields in an index relcache
entry. It's not clear whether this actually had any user-visible
consequences, but it's at least a bug waiting to happen.
In addition, do some code and docs review for DROP INDEX CONCURRENTLY;
some cosmetic code cleanup but mostly addition and revision of comments.
This will need to be back-patched, but in a noticeably different form,
so I'm committing it to HEAD before working on the back-patch.
Problem reported by Amit Kapila, diagnosis by Pavan Deolassee,
fix by Tom Lane and Andres Freund.
This change ensures that the planner will see implicit and explicit casts
as equivalent for all purposes, except in the minority of cases where
there's actually a semantic difference (as reflected by having a 3-argument
cast function). In particular, this fixes cases where the EquivalenceClass
machinery failed to consider two references to a varchar column as
equivalent if one was implicitly cast to text but the other was explicitly
cast to text, as seen in bug #7598 from Vaclav Juza. We have had similar
bugs before in other parts of the planner, so I think it's time to fix this
problem at the core instead of continuing to band-aid around it.
Remove set_coercionform_dontcare(), which represents the band-aid
previously in use for allowing matching of index and constraint expressions
with inconsistent cast labeling. (We can probably get rid of
COERCE_DONTCARE altogether, but I don't think removing that enum value in
back branches would be wise; it's possible there's third party code
referring to it.)
Back-patch to 9.2. We could go back further, and might want to once this
has been tested more; but for the moment I won't risk destabilizing plan
choices in long-since-stable branches.
This reduces unnecessary exposure of other headers through htup.h, which
is very widely included by many files.
I have chosen to move the function prototypes to the new file as well,
because that means htup.h no longer needs to include tupdesc.h. In
itself this doesn't have much effect in indirect inclusion of tupdesc.h
throughout the tree, because it's also required by execnodes.h; but it's
something to explore in the future, and it seemed best to do the htup.h
change now while I'm busy with it.
The original syntax wasn't universally loved, and it didn't allow its
usage in CREATE TABLE, only ALTER TABLE. It now works everywhere, and
it also allows using ALTER TABLE ONLY to add an uninherited CHECK
constraint, per discussion.
The pg_constraint column has accordingly been renamed connoinherit.
This commit partly reverts some of the changes in
61d81bd28d, particularly some pg_dump and
psql bits, because now pg_get_constraintdef includes the necessary NO
INHERIT within the constraint definition.
Author: Nikhil Sontakke
Some tweaks by me
Normally, accessing variable-length members of catalog structures past
the first one doesn't work at all. Here, it happened to work because
indnatts was checked to be 1, and so the defined FormData_pg_index
layout, using int2vector[1] and oidvector[1] for variable-length
arrays, happened to match the actual memory layout. But it's a very
fragile assumption, and it's not in a performance-critical path, so
code it properly using heap_getattr() instead.
bug analysis by Tom Lane
When a view is marked as a security barrier, it will not be pulled up
into the containing query, and no quals will be pushed down into it,
so that no function or operator chosen by the user can be applied to
rows not exposed by the view. Views not configured with this
option cannot provide robust row-level security, but will perform far
better.
Patch by KaiGai Kohei; original problem report by Heikki Linnakangas
(in October 2009!). Review (in earlier versions) by Noah Misch and
others. Design advice by Tom Lane and myself. Further review and
cleanup by me.
This makes them enforceable only on the parent table, not on children
tables. This is useful in various situations, per discussion involving
people bitten by the restrictive behavior introduced in 8.4.
Message-Id:
8762mp93iw.fsf@comcast.netCAFaPBrSMMpubkGf4zcRL_YL-AERUbYF_-ZNNYfb3CVwwEqc9TQ@mail.gmail.com
Authors: Nikhil Sontakke, Alex Hunsaker
Reviewed by Robert Haas and myself
Add a column pg_class.relallvisible to remember the number of pages that
were all-visible according to the visibility map as of the last VACUUM
(or ANALYZE, or some other operations that update pg_class.relpages).
Use relallvisible/relpages, instead of an arbitrary constant, to estimate
how many heap page fetches can be avoided during an index-only scan.
This is pretty primitive and will no doubt see refinements once we've
acquired more field experience with the index-only scan mechanism, but
it's way better than using a constant.
Note: I had to adjust an underspecified query in the window.sql regression
test, because it was changing answers when the plan changed to use an
index-only scan. Some of the adjacent tests perhaps should be adjusted
as well, but I didn't do that here.
When a btree index contains all columns required by the query, and the
visibility map shows that all tuples on a target heap page are
visible-to-all, we don't need to fetch that heap page. This patch depends
on the previous patches that made the visibility map reliable.
There's a fair amount left to do here, notably trying to figure out a less
chintzy way of estimating the cost of an index-only scan, but the core
functionality seems ready to commit.
Robert Haas and Ibrar Ahmed, with some previous work by Heikki Linnakangas.
walsender.h should depend on xlog.h, not vice versa. (Actually, the
inclusion was circular until a couple hours ago, which was even sillier;
but Bruce broke it in the expedient rather than logically correct
direction.) Because of that poor decision, plus blind application of
pgrminclude, we had a situation where half the system was depending on
xlog.h to include such unrelated stuff as array.h and guc.h. Clean up
the header inclusion, and manually revert a lot of what pgrminclude had
done so things build again.
This episode reinforces my feeling that pgrminclude should not be run
without adult supervision. Inclusion changes in header files in particular
need to be reviewed with great care. More generally, it'd be good if we
had a clearer notion of module layering to dictate which headers can sanely
include which others ... but that's a big task for another day.
It is possible for VACUUM to scan no pages at all, if the visibility map
shows that all pages are all-visible. In this situation VACUUM has no new
information to report about the relation's tuple density, so it wasn't
changing pg_class.reltuples ... but it updated pg_class.relpages anyway.
That's wrong in general, since there is no evidence to justify changing the
density ratio reltuples/relpages, but it's particularly bad if the previous
state was relpages=reltuples=0, which means "unknown tuple density".
We just replaced "unknown" with "zero". ANALYZE would eventually recover
from this, but it could take a lot of repetitions of ANALYZE to do so if
the relation size is much larger than the maximum number of pages ANALYZE
will scan, because of the moving-average behavior introduced by commit
b4b6923e03.
The only known situation where we could have relpages=reltuples=0 and yet
the visibility map asserts everything's visible is immediately following
a pg_upgrade. It might be advisable for pg_upgrade to try to preserve the
relpages/reltuples statistics; but in any case this code is wrong on its
own terms, so fix it. Per report from Sergey Koposov.
Back-patch to 8.4, where the visibility map was introduced, same as the
previous change.
We have to be sure that we have revalidated each nailed-in-cache relcache
entry before we try to use it to load data for some other relcache entry.
The introduction of "mapped relations" in 9.0 broke this, because although
we updated the state kept in relmapper.c early enough, we failed to
propagate that information into relcache entries soon enough; in
particular, we could try to fetch pg_class rows out of pg_class before
we'd updated its relcache entry's rd_node.relNode value from the map.
This bug accounts for Dave Gould's report of failures after "vacuum full
pg_class", and I believe that there is risk for other system catalogs
as well.
The core part of the fix is to copy relmapper data into the relcache
entries during "phase 1" in RelationCacheInvalidate(), before they'll be
used in "phase 2". To try to future-proof the code against other similar
bugs, I also rearranged the order in which nailed relations are visited
during phase 2: now it's pg_class first, then pg_class_oid_index, then
other nailed relations. This should ensure that RelationClearRelation can
apply RelationReloadIndexInfo to all nailed indexes without risking use
of not-yet-revalidated relcache entries.
Back-patch to 9.0 where the relation mapper was introduced.
The previous code tried to synchronize by unlinking the init file twice,
but that doesn't actually work: it leaves a window wherein a third process
could read the already-stale init file but miss the SI messages that would
tell it the data is stale. The result would be bizarre failures in catalog
accesses, typically "could not read block 0 in file ..." later during
startup.
Instead, hold RelCacheInitLock across both the unlink and the sending of
the SI messages. This is more straightforward, and might even be a bit
faster since only one unlink call is needed.
This has been wrong since it was put in (in 2002!), so back-patch to all
supported releases.
This means that they can initially be added to a large existing table
without checking its initial contents, but new tuples must comply to
them; a separate pass invoked by ALTER TABLE / VALIDATE can verify
existing data and ensure it complies with the constraint, at which point
it is marked validated and becomes a normal part of the table ecosystem.
An non-validated CHECK constraint is ignored in the planner for
constraint_exclusion purposes; when validated, cached plans are
recomputed so that partitioning starts working right away.
This patch also enables domains to have unvalidated CHECK constraints
attached to them as well by way of ALTER DOMAIN / ADD CONSTRAINT / NOT
VALID, which can later be validated with ALTER DOMAIN / VALIDATE
CONSTRAINT.
Thanks to Thom Brown, Dean Rasheed and Jaime Casanova for the various
reviews, and Robert Hass for documentation wording improvement
suggestions.
This patch was sponsored by Enova Financial.
Opening a catcache's index could require reading from that cache's own
catalog, which of course would acquire AccessShareLock on the catalog.
So the original coding here risks locking index before heap, which could
deadlock against another backend trying to get exclusive locks in the
normal order. Because InitCatCachePhase2 is only called when a backend
has to start up without a relcache init file, the deadlock was seldom seen
in the field. (And by the same token, there's no need to worry about any
performance disadvantage; so not much point in trying to distinguish
exactly which catalogs have the risk.)
Bug report, diagnosis, and patch by Nikhil Sontakke. Additional commentary
by me. Back-patch to all supported branches.
This adds collation support for columns and domains, a COLLATE clause
to override it per expression, and B-tree index support.
Peter Eisentraut
reviewed by Pavel Stehule, Itagaki Takahiro, Robert Haas, Noah Misch
The contents of an unlogged table are WAL-logged; thus, they are not
available on standby servers and are truncated whenever the database
system enters recovery. Indexes on unlogged tables are also unlogged.
Unlogged GiST indexes are not currently supported.
This commit replaces pg_class.relistemp with pg_class.relpersistence;
and also modifies the RangeVar node type to carry relpersistence rather
than istemp. It also removes removes rd_istemp from RelationData and
instead performs the correct computation based on relpersistence.
For clarity, we add three new macros: RelationNeedsWAL(),
RelationUsesLocalBuffers(), and RelationUsesTempNamespace(), so that we
can clarify the purpose of each check that previous depended on
rd_istemp.
This is intended as infrastructure for the upcoming unlogged tables
patch, as well as for future possible work on global temporary tables.
Formerly we looked up the operators associated with each index (caching
them in relcache) and then the planner looked up the btree opfamily
containing such operators in order to build the btree-centric pathkey
representation that describes the index's sort order. This is quite
pointless for btree indexes: we might as well just use the index's opfamily
information directly. That saves syscache lookup cycles during planning,
and furthermore allows us to eliminate the relcache's caching of operators
altogether, which may help in reducing backend startup time.
I added code to plancat.c to perform the same type of double lookup
on-the-fly if it's ever faced with a non-btree amcanorder index AM.
If such a thing actually becomes interesting for production, we should
replace that logic with some more-direct method for identifying the
corresponding btree opfamily; but it's not worth spending effort on now.
There is considerably more to do pursuant to my recent proposal to get rid
of sort-operator-based representations of sort orderings, but this patch
grabs some of the low-hanging fruit. I'll look at the remainder of that
work after the current commitfest.
In the previous coding, we simply issued ALTER SEQUENCE RESTART commands,
which do not roll back on error. This meant that an error between
truncating and committing left the sequences out of sync with the table
contents, with potentially bad consequences as were noted in a Warning on
the TRUNCATE man page.
To fix, create a new storage file (relfilenode) for a sequence that is to
be reset due to RESTART IDENTITY. If the transaction aborts, we'll
automatically revert to the old storage file. This acts just like a
rewriting ALTER TABLE operation. A penalty is that we have to take
exclusive lock on the sequence, but since we've already got exclusive lock
on its owning table, that seems unlikely to be much of a problem.
The interaction of this with usual nontransactional behaviors of sequence
operations is a bit weird, but it's hard to see what would be completely
consistent. Our choice is to discard cached-but-unissued sequence values
both when the RESTART is executed, and at rollback if any; but to not touch
the currval() state either time.
In passing, move the sequence reset operations to happen before not after
any AFTER TRUNCATE triggers are fired. The previous ordering was not
logically sensible, but was forced by the need to minimize inconsistency
if the triggers caused an error. Transactional rollback is a much better
solution to that.
Patch by Steve Singer, rather heavily adjusted by me.
SI invalidation events, rather than indirectly through the relcache.
In the previous coding, we had to flush a composite-type typcache entry
whenever we discarded the corresponding relcache entry. This caused problems
at least when testing with RELCACHE_FORCE_RELEASE, as shown in recent report
from Jeff Davis, and might result in real-world problems given the kind of
unexpected relcache flush that that test mechanism is intended to model.
The new coding decouples relcache and typcache management, which is a good
thing anyway from a structural perspective. The cost is that we have to
search the typcache linearly to find entries that need to be flushed. There
are a couple of ways we could avoid that, but at the moment it's not clear
it's worth any extra trouble, because the typcache contains very few entries
in typical operation.
Back-patch to 8.2, the same as some other recent fixes in this general area.
The patch could be carried back to 8.0 with some additional work, but given
that it's only hypothetical whether we're fixing any problem observable in
the field, it doesn't seem worth the work now.
This allows us to reliably remove all leftover temporary relation
files on cluster startup without reference to system catalogs or WAL;
therefore, we no longer include temporary relations in XLOG_XACT_COMMIT
and XLOG_XACT_ABORT WAL records.
Since these changes require including a backend ID in each
SharedInvalSmgrMsg, the size of the SharedInvalidationMessage.id
field has been reduced from two bytes to one, and the maximum number
of connections has been reduced from INT_MAX / 4 to 2^23-1. It would
be possible to remove these restrictions by increasing the size of
SharedInvalidationMessage by 4 bytes, but right now that doesn't seem
like a good trade-off.
Review by Jaime Casanova and Tom Lane.
database to connect to. This is necessary for the walsender code to work
properly (it was previously using an untenable assumption that template1 would
always be available to connect to). This also gets rid of a small security
shortcoming that was introduced in the original patch to eliminate the flat
authentication files: before, you could find out whether or not the requested
database existed even if you couldn't pass the authentication checks.
The changes needed to support this are mainly just to treat pg_authid and
pg_auth_members as nailed relations, so that we can read them without having
to be able to locate real pg_class entries for them. This mechanism was
already debugged for pg_database, but we hadn't recognized the value of
applying it to those catalogs too.
Since the current code doesn't have support for accessing toast tables before
we've brought up all of the relcache, remove pg_authid's toast table to ensure
that no one can store an out-of-line toasted value of rolpassword. The case
seems quite unlikely to occur in practice, and was effectively unsupported
anyway in the old "flatfiles" implementation.
Update genbki.pl to actually implement the same rules as bootstrap.c does for
not-nullability of catalog columns. The previous coding was a bit cheesy but
worked all right for the previous set of bootstrap catalogs. It does not work
for pg_authid, where rolvaliduntil needs to be nullable.
Initdb forced due to minor catalog changes (mainly the toast table removal).
relcache reload works. In the patched code, a relcache entry in process of
being rebuilt doesn't get unhooked from the relcache hash table; which means
that if a cache flush occurs due to sinval queue overrun while we're
rebuilding it, the entry could get blown away by RelationCacheInvalidate,
resulting in crash or misbehavior. Fix by ensuring that an entry being
rebuilt has positive refcount, so it won't be seen as a target for removal
if a cache flush occurs. (This will mean that the entry gets rebuilt twice
in such a scenario, but that's okay.) It appears that the problem can only
arise within a transaction that has previously reassigned the relfilenode of
a pre-existing table, via TRUNCATE or a similar operation. Per bug #5412
from Rusty Conover.
Back-patch to 8.2, same as the patch that introduced the problem.
I think that the failure can't actually occur in 8.2, since it lacks the
rd_newRelfilenodeSubid optimization, but let's make it work like the later
branches anyway.
Patch by Heikki, slightly editorialized on by me.
The purpose of this change is to eliminate the need for every caller
of SearchSysCache, SearchSysCacheCopy, SearchSysCacheExists,
GetSysCacheOid, and SearchSysCacheList to know the maximum number
of allowable keys for a syscache entry (currently 4). This will
make it far easier to increase the maximum number of keys in a
future release should we choose to do so, and it makes the code
shorter, too.
Design and review by Tom Lane.
Move rd_targblock, rd_fsm_nblocks, and rd_vm_nblocks from relcache to the smgr
relation entries, so that they will get reset to InvalidBlockNumber whenever
an smgr-level flush happens. Because we now send smgr invalidation messages
immediately (not at end of transaction) when a relation truncation occurs,
this ensures that other backends will reset their values before they next
access the relation. We no longer need the unreliable assumption that a
VACUUM that's doing a truncation will hold its AccessExclusive lock until
commit --- in fact, we can intentionally release that lock as soon as we've
completed the truncation. This patch therefore reverts (most of) Alvaro's
patch of 2009-11-10, as well as my marginal hacking on it yesterday. We can
also get rid of assorted no-longer-needed relcache flushes, which are far more
expensive than an smgr flush because they kill a lot more state.
In passing this patch fixes smgr_redo's failure to perform visibility-map
truncation, and cleans up some rather dubious assumptions in freespace.c and
visibilitymap.c about when rd_fsm_nblocks and rd_vm_nblocks can be out of
date.
needed by nothing else.
The restructuring I just finished doing on cache management exposed to me how
silly this routine was. Its function was to go into the catcache and blow
away all entries related to a given relation when there was a relcache flush
on that relation. However, there is no point in removing a catcache entry
if the catalog row it represents is still valid --- and if it isn't valid,
there must have been a catcache entry flush on it, because that's triggered
directly by heap_update or heap_delete on the catalog row. So this routine
accomplished nothing except to blow away valid cache entries that we'd very
likely be wanting in the near future to help reconstruct the relcache entry.
Dumb.
On top of which, it required a subtle and easy-to-get-wrong attribute in
syscache definitions, ie, the column containing the OID of the related
relation if any. Removing that is a very useful maintenance simplification.
of shared or nailed system catalogs. This has two key benefits:
* The new CLUSTER-based VACUUM FULL can be applied safely to all catalogs.
* We no longer have to use an unsafe reindex-in-place approach for reindexing
shared catalogs.
CLUSTER on nailed catalogs now works too, although I left it disabled on
shared catalogs because the resulting pg_index.indisclustered update would
only be visible in one database.
Since reindexing shared system catalogs is now fully transactional and
crash-safe, the former special cases in REINDEX behavior have been removed;
shared catalogs are treated the same as non-shared.
This commit does not do anything about the recently-discussed problem of
deadlocks between VACUUM FULL/CLUSTER on a system catalog and other
concurrent queries; will address that in a separate patch. As a stopgap,
parallel_schedule has been tweaked to run vacuum.sql by itself, to avoid
such failures during the regression tests.
of old and new toast tables can be done either at the logical level (by
swapping the heaps' reltoastrelid links) or at the physical level (by swapping
the relfilenodes of the toast tables and their indexes). This is necessary
infrastructure for upcoming changes to support CLUSTER/VAC FULL on shared
system catalogs, where we cannot change reltoastrelid. The physical swap
saves a few catalog updates too.
We unfortunately have to keep the logical-level swap logic because in some
cases we will be adding or deleting a toast table, so there's no possibility
of a physical swap. However, that only happens as a consequence of schema
changes in the table, which we do not need to support for system catalogs,
so such cases aren't an obstacle for that.
In passing, refactor the cluster support functions a little bit to eliminate
unnecessarily-duplicated code; and fix the problem that while CLUSTER had
been taught to rename the final toast table at need, ALTER TABLE had not.
the relfilenode of currently-not-relocatable system catalogs.
1. Get rid of inval.c's dependency on relfilenode, by not having it emit
smgr invalidations as a result of relcache flushes. Instead, smgr sinval
messages are sent directly from smgr.c when an actual relation delete or
truncate is done. This makes considerably more structural sense and allows
elimination of a large number of useless smgr inval messages that were
formerly sent even in cases where nothing was changing at the
physical-relation level. Note that this reintroduces the concept of
nontransactional inval messages, but that's okay --- because the messages
are sent by smgr.c, they will be sent in Hot Standby slaves, just from a
lower logical level than before.
2. Move setNewRelfilenode out of catalog/index.c, where it never logically
belonged, into relcache.c; which is a somewhat debatable choice as well but
better than before. (I considered catalog/storage.c, but that seemed too
low level.) Rename to RelationSetNewRelfilenode.
3. Cosmetic cleanups of some other relfilenode manipulations.
underlying catalog not only the index itself. Otherwise, if the cache
load process touches the catalog (which will happen for many though not
all of these indexes), we are locking index before parent table, which can
result in a deadlock against processes that are trying to lock them in the
normal order. Per today's failure on buildfarm member gothic_moth; it's
surprising the problem hadn't been identified before.
Back-patch to 8.2. Earlier releases didn't have the issue because they
didn't try to lock these indexes during load (instead assuming that they
couldn't change schema at all during multiuser operation).
occurring during a reload, such as query-cancel. Instead of zeroing out
an existing relcache entry and rebuilding it in place, build a new relcache
entry, then swap its contents with the old one, then free the new entry.
This avoids problems with code believing that a previously obtained pointer
to a cache entry must still reference a valid entry, as seen in recent
failures on buildfarm member jaguar. (jaguar is using CLOBBER_CACHE_ALWAYS
which raises the probability of failure substantially, but the problem
could occur in the field without that.) The previous design was okay
when it was made, but subtransactions and the ResourceOwner mechanism
make it unsafe now.
Also, make more use of the already existing rd_isvalid flag, so that we
remember that the entry requires rebuilding even if the first attempt fails.
Back-patch as far as 8.2. Prior versions have enough issues around relcache
reload anyway (due to inadequate locking) that fixing this one doesn't seem
worthwhile.
can upgrade clusters without renaming the tablespace directories. New
directory structure format is, e.g.:
$PGDATA/pg_tblspc/20981/PG_8.5_201001061/719849/83292814
pg_attribute, by having genbki.pl derive the information from the various
catalog header files. This greatly simplifies modification of the
"bootstrapped" catalogs.
This patch finally kills genbki.sh and Gen_fmgrtab.sh; we now rely entirely on
Perl scripts for those build steps. To avoid creating a Perl build dependency
where there was not one before, the output files generated by these scripts
are now treated as distprep targets, ie, they will be built and shipped in
tarballs. But you will need a reasonably modern Perl (probably at least
5.6) if you want to build from a CVS pull.
The changes to the MSVC build process are untested, and may well break ---
we'll soon find out from the buildfarm.
John Naylor, based on ideas from Robert Haas and others
probably got there via blind copy-and-paste from one of the legitimate
callers, so rearrange and comment that code a bit to make it clearer that
this isn't a necessary prerequisite to hash_create. Per observation
from Robert Haas.
support any indexable commutative operator, not just equality. Two rows
violate the exclusion constraint if "row1.col OP row2.col" is TRUE for
each of the columns in the constraint.
Jeff Davis, reviewed by Robert Haas
relation rowtype OID into the relcache entries it builds. This ensures
that catcache copies of the relation tupdescs will be fully correct.
While the deficiency doesn't seem to have any effect in the current
sources, we have been bitten by not-quite-right catcache tupdescs before,
so it seems like a good idea to maintain the rule that they should be right.
possibility of shared-inval messages causing a relcache flush while it tries
to fill in missing data in preloaded relcache entries. There are actually
two distinct failure modes here:
1. The flush could delete the next-to-be-processed cache entry, causing
the subsequent hash_seq_search calls to go off into the weeds. This is
the problem reported by Michael Brown, and I believe it also accounts
for bug #5074. The simplest fix is to restart the hashtable scan after
we've read any new data from the catalogs. It appears that pre-8.4
branches have not suffered from this failure, because by chance there were
no other catalogs sharing the same hash chains with the catalogs that
RelationCacheInitializePhase2 had work to do for. However that's obviously
pretty fragile, and it seems possible that derivative versions with
additional system catalogs might be vulnerable, so I'm back-patching this
part of the fix anyway.
2. The flush could delete the *current* cache entry, in which case the
pointer to the newly-loaded data would end up being stored into an
already-deleted Relation struct. As long as it was still deleted, the only
consequence would be some leaked space in CacheMemoryContext. But it seems
possible that the Relation struct could already have been recycled, in
which case this represents a hard-to-reproduce clobber of cached data
structures, with unforeseeable consequences. The fix here is to pin the
entry while we work on it.
In passing, also change RelationCacheInitializePhase2 to Assert that
formrdesc() set up the relation's cached TupleDesc (rd_att) with the
correct type OID and hasoids values. This is more appropriate than
silently updating the values, because the original tupdesc might already
have been copied into the catcache. However this part of the patch is
not in HEAD because it fails due to some questionable recent changes in
formrdesc :-(. That will be cleaned up in a subsequent patch.
To make this work in the base case, pg_database now has a nailed-in-cache
relation descriptor that is initialized using hardwired knowledge in
relcache.c. This means pg_database is added to the set of relations that
need to have a Schema_pg_xxx macro maintained in pg_attribute.h. When this
path is taken, we'll have to do a seqscan of pg_database to find the row
we need.
In the normal case, we are able to do an indexscan to find the database's row
by name. This is made possible by storing a global relcache init file that
describes only the shared catalogs and their indexes (and therefore is usable
by all backends in any database). A new backend loads this cache file,
finds its database OID after an indexscan on pg_database, and then loads
the local relcache init file for that database.
This change should effectively eliminate number of databases as a factor
in backend startup time, even with large numbers of databases. However,
the real reason for doing it is as a first step towards getting rid of
the flat files altogether. There are still several other sub-projects
to be tackled before that can happen.
The current implementation fires an AFTER ROW trigger for each tuple that
looks like it might be non-unique according to the index contents at the
time of insertion. This works well as long as there aren't many conflicts,
but won't scale to massive unique-key reassignments. Improving that case
is a TODO item.
Dean Rasheed
temp relations; this is no more expensive than before, now that we have
pg_class.relistemp. Insert tests into bufmgr.c to prevent attempting
to fetch pages from nonlocal temp relations. This provides a low-level
defense against bugs-of-omission allowing temp pages to be loaded into shared
buffers, as in the contrib/pgstattuple problem reported by Stuart Bishop.
While at it, tweak a bunch of places to use new relcache tests (instead of
expensive probes into pg_namespace) to detect local or nonlocal temp tables.
relations (including a temp table's indexes and toast table/index), and
false for normal relations. For ease of checking, this commit just adds
the column and fills it correctly --- revising the relation access machinery
to use it will come separately.
refactor the relcache code that used to do that. This allows other callers
(particularly autovacuum) to do the same without necessarily having to open
and lock a table.
field needs to be included in equalRuleLocks() comparisons, else updates
will fail to propagate into relcache entries when they have positive
reference count (ie someone is using the relcache entry).
Per report from Alex Hunsaker.
heap page, where a set bit indicates that all tuples on the page are
visible to all transactions, and the page therefore doesn't need
vacuuming. It is stored in a new relation fork.
Lazy vacuum uses the visibility map to skip pages that don't need
vacuuming. Vacuum is also responsible for setting the bits in the map.
In the future, this can hopefully be used to implement index-only-scans,
but we can't currently guarantee that the visibility map is always 100%
up-to-date.
In addition to the visibility map, there's a new PD_ALL_VISIBLE flag on
each heap page, also indicating that all tuples on the page are visible to
all transactions. It's important that this flag is kept up-to-date. It
is also used to skip visibility tests in sequential scans, which gives a
small performance gain on seqscans.
("there might be triggers") rather than an exact count. This is necessary
catalog infrastructure for the upcoming patch to reduce the strength of
locking needed for trigger addition/removal. Split out and committed
separately for ease of reviewing/testing.
In passing, also get rid of the unused pg_class columns relukeys, relfkeys,
and relrefs, which haven't been maintained in many years and now have no
chance of ever being maintained (because of wishing to avoid locking).
Simon Riggs
free space information is stored in a dedicated FSM relation fork, with each
relation (except for hash indexes; they don't use FSM).
This eliminates the max_fsm_relations and max_fsm_pages GUC options; remove any
trace of them from the backend, initdb, and documentation.
Rewrite contrib/pg_freespacemap to match the new FSM implementation. Also
introduce a new variant of the get_raw_page(regclass, int4, int4) function in
contrib/pageinspect that let's you to return pages from any relation fork, and
a new fsm_page_contents() function to inspect the new FSM pages.
REINDEX DATABASE including same) is done before a session has done any other
update on pg_class, the pg_class relcache entry was left with an incorrect
setting of rd_indexattr, because the indexed-attributes set would be first
demanded at a time when we'd forced a partial list of indexes into the
pg_class entry, and it would remain cached after that. This could result
in incorrect decisions about HOT-update safety later in the same session.
In practice, since only pg_class_relname_nsp_index would be missed out,
only ALTER TABLE RENAME and ALTER TABLE SET SCHEMA could trigger a problem.
Per report and test case from Ondrej Jirman.
unnecessary #include lines in it. Also, move some tuple routine prototypes and
macros to htup.h, which allows removal of heapam.h inclusion from some .c
files.
For this to work, a new header file access/sysattr.h needed to be created,
initially containing attribute numbers of system columns, for pg_dump usage.
While at it, make contrib ltree, intarray and hstore header files more
consistent with our header style.
it is trying to build a relcache entry for. This is an oversight in my 8.2
patch that tried to ensure we always took a lock on a relation before trying
to build its relcache entry. The implication is that if someone committed a
reindex of a critical system index at about the same time that some other
backend were starting up without a valid pg_internal.init file, the second one
might PANIC due to not seeing any valid version of the index's pg_class row.
Improbable case, but definitely not impossible.
eval_const_expressions needs to be passed the PlannerInfo ("root") structure,
because in some cases we want it to substitute values for Param nodes.
(So "constant" is not so constant as all that ...) This mistake partially
disabled optimization of unnamed extended-Query statements in 8.3: in
particular the LIKE-to-indexscan optimization would never be applied if the
LIKE pattern was passed as a parameter, and constraint exclusion depending
on a parameter value didn't work either.
strings. This patch introduces four support functions cstring_to_text,
cstring_to_text_with_len, text_to_cstring, and text_to_cstring_buffer, and
two macros CStringGetTextDatum and TextDatumGetCString. A number of
existing macros that provided variants on these themes were removed.
Most of the places that need to make such conversions now require just one
function or macro call, in place of the multiple notational layers that used
to be needed. There are no longer any direct calls of textout or textin,
and we got most of the places that were using handmade conversions via
memcpy (there may be a few still lurking, though).
This commit doesn't make any serious effort to eliminate transient memory
leaks caused by detoasting toasted text objects before they reach
text_to_cstring. We changed PG_GETARG_TEXT_P to PG_GETARG_TEXT_PP in a few
places where it was easy, but much more could be done.
Brendan Jurd and Tom Lane
reloading of operator class information on each use of LookupOpclassInfo.
Had this been in place a year ago, it would have helped me find a bug
in the then-new 'operator family' code. Now that we have a build farm
member testing CLOBBER_CACHE_ALWAYS on a regular basis, it seems worth
expending a little bit of effort here.
columns, and the new version can be stored on the same heap page, we no longer
generate extra index entries for the new version. Instead, index searches
follow the HOT-chain links to ensure they find the correct tuple version.
In addition, this patch introduces the ability to "prune" dead tuples on a
per-page basis, without having to do a complete VACUUM pass to recover space.
VACUUM is still needed to clean up dead index entries, however.
Pavan Deolasee, with help from a bunch of other people.
named pg_toast_temp_nnn, alongside the pg_temp_nnn schemas used for the temp
tables themselves. This allows low-level code such as the relcache to
recognize that these tables are indeed temporary, which enables various
optimizations such as not WAL-logging changes and using local rather than
shared buffers for access. Aside from obvious performance benefits, this
provides a solution to bug #3483, in which other backends unexpectedly held
open file references to temporary tables. The scheme preserves the property
that TOAST tables are not in any schema that's normally in the search path,
so they don't conflict with user table names.
initdb forced because of changes in system view definitions.
and aborted transactions have different effects; also teach it not to assume
that prepared transactions are always committed.
Along the way, simplify the pgstats API by tying counting directly to
Relations; I cannot detect any redeeming social value in having stats
pointers in HeapScanDesc and IndexScanDesc structures. And fix a few
corner cases in which counts might be missed because the relation's
pgstat_info pointer hadn't been set.
true at the very end of its processing, the update is broadcast via a
shared-cache-inval message for the index; without this, existing backends that
already have relcache entries for the index might never see it become valid.
Also, force a relcache inval on the index's parent table at the same time,
so that any cached plans for that table are re-planned; this ensures that
the newly valid index will be used if appropriate. Aside from making
C.I.C. behave more reasonably, this is necessary infrastructure for some
aspects of the HOT patch. Pavan Deolasee, with a little further stuff from
me.
rules to be defined with different, per session controllable, behaviors
for replication purposes.
This will allow replication systems like Slony-I and, as has been stated
on pgsql-hackers, other products to control the firing mechanism of
triggers and rewrite rules without modifying the system catalog directly.
The firing mechanisms are controlled by a new superuser-only GUC
variable, session_replication_role, together with a change to
pg_trigger.tgenabled and a new column pg_rewrite.ev_enabled. Both
columns are a single char data type now (tgenabled was a bool before).
The possible values in these attributes are:
'O' - Trigger/Rule fires when session_replication_role is "origin"
(default) or "local". This is the default behavior.
'D' - Trigger/Rule is disabled and fires never
'A' - Trigger/Rule fires always regardless of the setting of
session_replication_role
'R' - Trigger/Rule fires when session_replication_role is "replica"
The GUC variable can only be changed as long as the system does not have
any cached query plans. This will prevent changing the session role and
accidentally executing stored procedures or functions that have plans
cached that expand to the wrong query set due to differences in the rule
firing semantics.
The SQL syntax for changing a triggers/rules firing semantics is
ALTER TABLE <tabname> <when> TRIGGER|RULE <name>;
<when> ::= ENABLE | ENABLE ALWAYS | ENABLE REPLICA | DISABLE
psql's \d command as well as pg_dump are extended in a backward
compatible fashion.
Jan
Get rid of VARATT_SIZE and VARATT_DATA, which were simply redundant with
VARSIZE and VARDATA, and as a consequence almost no code was using the
longer names. Rename the length fields of struct varlena and various
derived structures to catch anyplace that was accessing them directly;
and clean up various places so caught. In itself this patch doesn't
change any behavior at all, but it is necessary infrastructure if we hope
to play any games with the representation of varlena headers.
Greg Stark and Tom Lane
per-column options for btree indexes. The planner's support for this is still
pretty rudimentary; it does not yet know how to plan mergejoins with
nondefault ordering options. The documentation is pretty rudimentary, too.
I'll work on improving that stuff later.
Note incompatible change from prior behavior: ORDER BY ... USING will now be
rejected if the operator is not a less-than or greater-than member of some
btree opclass. This prevents less-than-sane behavior if an operator that
doesn't actually define a proper sort ordering is selected.
pg_opclass during LookupOpclassInfo(), I'd turned pg_opclass_oid_index
into a critical system index. However the problem could only manifest
during a backend's first attempt to load opclass data, and then only
if it had successfully loaded pg_internal.init and subsequently received
a relcache flush; which made it impossible to reproduce in sequential
tests and darn hard even in parallel tests. Memo to self: when
exercising cache flush scenarios, must disable LookupOpclassInfo's
internal cache too.
cases. Operator classes now exist within "operator families". While most
families are equivalent to a single class, related classes can be grouped
into one family to represent the fact that they are semantically compatible.
Cross-type operators are now naturally adjunct parts of a family, without
having to wedge them into a particular opclass as we had done originally.
This commit restructures the catalogs and cleans up enough of the fallout so
that everything still works at least as well as before, but most of the work
needed to actually improve the planner's behavior will come later. Also,
there are not yet CREATE/DROP/ALTER OPERATOR FAMILY commands; the only way
to create a new family right now is to allow CREATE OPERATOR CLASS to make
one by default. I owe some more documentation work, too. But that can all
be done in smaller pieces once this infrastructure is in place.
stale relcache init files (pg_internal.init), and there is no mechanism for
updating them during WAL replay. Easiest solution is just to delete the init
files at conclusion of startup, and let the first backend started in each
database take care of rebuilding the init file. Simon Riggs and Tom Lane.
Back-patched to 8.1. Arguably this should be fixed in 8.0 too, but it would
require significantly more code since 8.0 has no handy startup-time scan of
pg_database to piggyback on. Manual solution of the problem is possible
in 8.0 (just delete the pg_internal.init files before starting WAL replay),
so that may be a sufficient answer.
can create or modify rules for the table. Do setRuleCheckAsUser() while
loading rules into the relcache, rather than when defining a rule. This
ensures that permission checks for tables referenced in a rule are done with
respect to the current owner of the rule's table, whereas formerly ALTER TABLE
OWNER would fail to update the permission checking for associated rules.
Removal of separate RULE privilege is needed to prevent various scenarios
in which a grantee of RULE privilege could effectively have any privilege
of the table owner. For backwards compatibility, GRANT/REVOKE RULE is still
accepted, but it doesn't do anything. Per discussion here:
http://archives.postgresql.org/pgsql-hackers/2006-04/msg01138.php
(table or index) before trying to open its relcache entry. This fixes
race conditions in which someone else commits a change to the relation's
catalog entries while we are in process of doing relcache load. Problems
of that ilk have been reported sporadically for years, but it was not
really practical to fix until recently --- for instance, the recent
addition of WAL-log support for in-place updates helped.
Along the way, remove pg_am.amconcurrent: all AMs are now expected to support
concurrent update.
discussion (including making def_arg allow reserved words), add missed
opt_definition for UNIQUE case. Put the reloptions support code in a less
random place (I chose to make a new file access/common/reloptions.c).
Eliminate header inclusion creep. Make the index options functions safely
user-callable (seems like client apps might like to be able to test validity
of options before trying to make an index). Reduce overhead for normal case
with no options by allowing rd_options to be NULL. Fix some unmaintainably
klugy code, including getting rid of Natts_pg_class_fixed at long last.
Some stylistic cleanup too, and pay attention to keeping comments in sync
with code.
Documentation still needs work, though I did fix the omissions in
catalogs.sgml and indexam.sgml.
by creating a reference-count mechanism, similar to what we did a long time
ago for catcache entries. The back branches have an ugly solution involving
lots of extra copies, but this way is more efficient. Reference counting is
only applied to tupdescs that are actually in caches --- there seems no need
to use it for tupdescs that are generated in the executor, since they'll go
away during plan shutdown by virtue of being in the per-query memory context.
Neil Conway and Tom Lane
it's not necessary to have three separate calls anymore. This patch also
fixes things so we don't try to read pg_internal.init until after we've
obtained lock on the target database; which was fairly harmless, but it's
certainly cleaner this way.
thereby saving a visit to the metapage in most index searches/updates.
This wouldn't actually save any I/O (since in the old regime the metapage
generally stayed in cache anyway), but it does provide a useful decrease
in bufmgr traffic in high-contention scenarios. Per my recent proposal.
index's support-function cache (in index_getprocinfo). Since none of that
data can change for an index that's in active use, it seems sufficient to
treat all open indexes the same way we were treating "nailed" system indexes
--- that is, just re-read the pg_class row and leave the rest of the relcache
entry strictly alone. The pg_class re-read might not be strictly necessary
either, but since the reltablespace and relfilenode can change in normal
operation it seems safest to do it. (We don't support changing any of the
other info about an index at all, at the moment.)
Back-patch as far as 8.0. It might be possible to adapt the patch to 7.4,
but it would take more work than I care to expend for such a low-probability
problem. 7.3 is out of luck for sure.
This is utterly insignificant in normal operation, but it becomes a
problem during cache inval stress testing. The original coding in fact
had no leak --- the 8.0 List rewrite created the issue. I wonder whether
list_concat should pfree the discarded header?
and nail a couple more system indexes into cache. This doesn't make
any difference in normal system operation, but when forcing constant
cache resets it's difficult to get through the rules regression test
without these changes.
the data defining the semantics of a lock method (ie, conflict resolution
table and ancillary data, which is all constant) and the hash tables
storing the current state. The only thing we give up by this is the
ability to use separate hashtables for different lock methods, but there
is no need for that anyway. Put some extra fields into the LockMethod
definition structs to clean up some other uglinesses, like hard-wired
tests for DEFAULT_LOCKMETHOD and USER_LOCKMETHOD. This commit doesn't
do anything about the performance issues we were discussing, but it clears
away some of the underbrush that's in the way of fixing that.
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
the parent table, even if the command that creates them is executed by
someone else (such as a superuser or a member of the owning role).
Per gripe from Michael Fuhr.
whenever we generate a new OID. This prevents occasional duplicate-OID
errors that can otherwise occur once the OID counter has wrapped around.
Duplicate relfilenode values are also checked for when creating new
physical files. Per my recent proposal.
ResourceOwner mechanism already released all reference counts for the
cache entries; therefore, we do not need to scan the catcache or relcache
at transaction end, unless we want to do it as a debugging crosscheck.
Do the crosscheck only in Assert mode. This is the same logic we had
previously installed in AtEOXact_Buffers to avoid overhead with large
numbers of shared buffers. I thought it'd be a good idea to do it here
too, in view of Kari Lavikka's recent report showing a real-world case
where AtEOXact_CatCache is taking a significant fraction of runtime.
Peter Eisentraut
Tom Lane
Alvaro Herrera
Robert Haas
Heikki Linnakangas
Bruce Momjian
Kevin Grittner
Teodor Sigaev
Simon Riggs
Stephen Frost
Andres Freund
Magnus Hagander
Jan Wieck
Neil Conway