default, but OIDS are removed from many system catalogs that don't need them.
Some interesting side effects: TOAST pointers are 20 bytes not 32 now;
pg_description has a three-column key instead of one.
Bugs fixed in passing: BINARY cursors work again; pg_class.relhaspkey
has some usefulness; pg_dump dumps comments on indexes, rules, and
triggers in a valid order.
initdb forced.
validity checking rules for VACUUM. Make some other rearrangements of the
VACUUM code to allow more code to be shared between full and lazy VACUUM.
Minor code cleanups and added comments for TransactionId manipulations.
stub) into the rest of the system. Adopt a cleaner approach to preventing
deadlock in concurrent heap_updates: allow RelationGetBufferForTuple to
select any page of the rel, and put the onus on it to lock both buffers
in a consistent order. Remove no-longer-needed isExtend hack from
API of ReleaseAndReadBuffer.
do anything yet, but it has the necessary connections to initialization
and so forth. Make some gestures towards allowing number of blocks in
a relation to be BlockNumber, ie, unsigned int, rather than signed int.
(I doubt I got all the places that are sloppy about it, yet.) On the
way, replace the hardwired NLOCKS_PER_XACT fudge factor with a GUC
variable.
appropriate pin-count manipulation, and instead use ReleaseAndReadBuffer.
Make use of the fact that the passed-in buffer (if there is one) must
be pinned to avoid grabbing the bufmgr spinlock when we are able to
return this same buffer. Eliminate unnecessary 'previous tuple' and
'next tuple' fields of HeapScanDesc and IndexScanDesc, thereby removing
a whole lot of bookkeeping from heap_getnext() and related routines.
PageGetFreeSpace() was being called while not holding the buffer lock, which
not only could yield a garbage answer, but even if it's the right answer there
might be less space available after we reacquire the buffer lock.
Also repair potential deadlock introduced by my recent performance improvement
in RelationGetBufferForTuple(): it was possible for two heap_updates to try to
lock two buffers in opposite orders. The fix creates a global rule that
buffers of a single heap relation should be locked in decreasing block number
order. Currently, this only applies to heap_update; VACUUM can get away with
ignoring the rule since it holds exclusive lock on the whole relation anyway.
However, if we try to implement a VACUUM that can run in parallel with other
transactions, VACUUM will also have to obey the lock order rule.
when we need to move to a new page; as long as we can insert the new
tuple on the same page as before, we only need LockBuffer and not the
expensive stuff. Also, twiddle bufmgr interfaces to avoid redundant
lseeks in RelationGetBufferForTuple and BufferAlloc. Successive inserts
now require one lseek per page added, rather than one per tuple with
several additional ones at each page boundary as happened before.
Lock contention when multiple backends are inserting in same table
is also greatly reduced.
a separate statement (though it can still be invoked as part of VACUUM, too).
pg_statistic redesigned to be more flexible about what statistics are
stored. ANALYZE now collects a list of several of the most common values,
not just one, plus a histogram (not just the min and max values). Random
sampling is used to make the process reasonably fast even on very large
tables. The number of values and histogram bins collected is now
user-settable via an ALTER TABLE command.
There is more still to do; the new stats are not being used everywhere
they could be in the planner. But the remaining changes for this project
should be localized, and the behavior is already better than before.
A not-very-related change is that sorting now makes use of btree comparison
routines if it can find one, rather than invoking '<' twice.
compressed storage works perfectly well. Might as well have a coherent
strategy for applying it, rather than the haphazard store-what-you-get
approach that was in the code before. The strategy I've set up here is
to attempt compression of any compressible index value exceeding
BLCKSZ/16, or about 500 bytes by default.
bothering to check the return value --- which meant that in case the
update or delete failed because of a concurrent update, you'd not find
out about it, except by observing later that the transaction produced
the wrong outcome. There are now subroutines simple_heap_update and
simple_heap_delete that should be used anyplace that you're not prepared
to do the full nine yards of coping with concurrent updates. In
practice, that seems to mean absolutely everywhere but the executor,
because *noplace* else was checking.
are now critical sections, so as to ensure die() won't interrupt us while
we are munging shared-memory data structures. Avoid insecure intermediate
states in some code that proc_exit will call, like palloc/pfree. Rename
START/END_CRIT_CODE to START/END_CRIT_SECTION, since that seems to be
what people tend to call them anyway, and make them be called with () like
a function call, in hopes of not confusing pg_indent.
I doubt that this is sufficient to make SIGTERM safe anywhere; there's
just too much code that could get invoked during proc_exit().
before calling RelationInvalidateHeapTuple(), which is bad because the
latter needs to look at the tuple data, which is in the shared disk
buffer. If another backend manages to recycle the buffer while this
is going on, we will compute the wrong hashindex for the tuple or
maybe even crash outright. Must hold buffer refcount until afterwards.
(This bug is not in 7.0.*; seems to be have introduced during WAL changes.)
1. Distinguish cases where a Datum representing a tuple datatype is an OID
from cases where it is a pointer to TupleTableSlot, and make sure we use
the right typlen in each case.
2. Make fetchatt() and related code support 8-byte by-value datatypes on
machines where Datum is 8 bytes. Centralize knowledge of the available
by-value datatype sizes in two macros in tupmacs.h, so that this will be
easier if we ever have to do it again.
both MULTIBYTE and TOAST prevent char(n) from being truly fixed-size.
Simplify and speed up fastgetattr() and index_getattr() macros by
eliminating special cases for attnum=1. It's just as fast to handle
the first attribute by presetting its attcacheoff to zero; so do that
instead when loading the tupledesc in relcache.c.
Context diff this time.
Remove -m486 compile args for FreeBSD-i386, compile -O2 on i386.
Compile with only -O on alpha for codegen safety.
Make the port use the TEST_AND_SET for alpha and i386 on FreeBSD.
Fix a lot of bogus string formats for outputting pointers (cast to int
and %u/%x replaced with no cast and %p), and 'Size'(size_t) are now
cast to 'unsigned long' and output with %lu/
Remove an unused variable.
Alfred Perlstein
(WAL logging for this is not done yet, however.) Clean up a number of really
crufty things that are no longer needed now that DROP behaves nicely. Make
temp table mapper do the right things when drop or rename affecting a temp
table is rolled back. Also, remove "relation modified while in use" error
check, in favor of locking tables at first reference and holding that lock
throughout the statement.
source, due to addition of header overhead), store it as plain data
rather than pseudo-compressed data. This saves a few microseconds when
reading it out, but much more importantly guarantees that the toaster
won't actually expand tuples that contain incompressible data. That's
essential to avoid 'Tuple too big' failures with large objects.
trying to toast tuples inserted into toast tables! Fix is two-pronged:
first, ensure all columns of a toast table are marked attstorage='p',
and second, alter the target chunk size so that it's less than the
threshold for trying to toast a tuple. (Code tried to do that but the
expression was wrong.) A few cosmetic cleanups in tuptoaster too.
NOTE: initdb forced due to change in toaster chunk-size.
These two routines will now ALWAYS elog() on failure, whether you ask for
a lock or not. If you really want to get a NULL return on failure, call
the new routines heap_open_nofail()/heap_openr_nofail(). By my count there
are only about three places that actually want that behavior. There were
rather more than three places that were missing the check they needed to
make under the old convention :-(.
Don't use DISABLE_COMPLEX_MACRO on Solaris. Don't define the
replacement function in the header file. Use -KPIC, not -K PIC.
Use CC to link C++ libraries, not ld/ar.
Eliminate file not found warnings in tcl build code.
for details). It doesn't really do that much yet, since there are no
short-term memory contexts in the executor, but the infrastructure is
in place and long-term contexts are handled reasonably. A few long-
standing bugs have been fixed, such as 'VACUUM; anything' in a single
query string crashing. Also, out-of-memory is now considered a
recoverable ERROR, not FATAL.
Eliminate a large amount of crufty, now-dead code in and around
memory management.
Fix problem with holding off SIGTRAP, SIGSEGV, etc in postmaster and
backend startup.
really ought to fix relcache entry construction so that it does not
do so much with CurrentMemoryContext = CacheCxt. As is, relatively
harmless leaks in either sequential or index scanning translate to
permanent leaks if they occur when called from relcache build.
For the moment, however, the path of least resistance is to repair
all such leaks...
running gcc and HP's cc with warnings cranked way up. Signed vs unsigned
comparisons, routines declared static and then defined not-static,
that kind of thing. Tedious, but perhaps useful...
* Buffer refcount cleanup (per my "progress report" to pghackers, 9/22).
* Add links to backend PROC structs to sinval's array of per-backend info,
and use these links for routines that need to check the state of all
backends (rather than the slow, complicated search of the ShmemIndex
hashtable that was used before). Add databaseOID to PROC structs.
* Use this to implement an interlock that prevents DESTROY DATABASE of
a database containing running backends. (It's a little tricky to prevent
a concurrently-starting backend from getting in there, since the new
backend is not able to lock anything at the time it tries to look up
its database in pg_database. My solution is to recheck that the DB is
OK at the end of InitPostgres. It may not be a 100% solution, but it's
a lot better than no interlock at all...)
* In ALTER TABLE RENAME, flush buffers for the relation before doing the
rename of the physical files, to ensure we don't get failures later from
mdblindwrt().
* Update TRUNCATE patch so that it actually compiles against current
sources :-(.
You should do "make clean all" after pulling these changes.
additional argument specifying the kind of lock to acquire/release (or
'NoLock' to do no lock processing). Ensure that all relations are locked
with some appropriate lock level before being examined --- this ensures
that relevant shared-inval messages have been processed and should prevent
problems caused by concurrent VACUUM. Fix several bugs having to do with
mismatched increment/decrement of relation ref count and mismatched
heap_open/close (which amounts to the same thing). A bogus ref count on
a relation doesn't matter much *unless* a SI Inval message happens to
arrive at the wrong time, which is probably why we got away with this
sloppiness for so long. Repair missing grab of AccessExclusiveLock in
DROP TABLE, ALTER/RENAME TABLE, etc, as noted by Hiroshi.
Recommend 'make clean all' after pulling this update; I modified the
Relation struct layout slightly.
Will post further discussion to pghackers list shortly.
and possibly for other cases too:
DO NOT cache status of transaction in unknown state
(i.e. non-committed and non-aborted ones)
Example:
T1 reads row updated/inserted by running T2 and cache T2 status.
T2 commits.
Now T1 reads a row updated by T2 and with HEAP_XMAX_COMMITTED
in t_infomask (so cached T2 status is not changed).
Now T1 EvalPlanQual gets updated row version without HEAP_XMIN_COMMITTED
-> TransactionIdDidCommit(t_xmin) and TransactionIdDidAbort(t_xmin)
return FALSE and T2 decides that t_xmin is not committed and gets
ERROR above.
It's too late to find more smart way to handle such cases and so
I just changed xact status caching and got rid TransactionIdFlushCache()
from code.
Changed: transam.c, xact.c, lmgr.c and transam.h - last three
just because of TransactionIdFlushCache() is removed.
2. heapam.c:
T1 marked a row for update. T2 waits for T1 commit/abort.
T1 commits. T3 updates the row before T2 locks row page.
Now T2 sees that new row t_xmax is different from xact id (T1)
T2 was waiting for. Old code did Assert here. New one goes to
HeapTupleSatisfiesUpdate. Obvious changes too.
3. Added Assert to vacuum.c
4. bufmgr.c: break
Assert(buf->r_locks == 0 && !buf->ri_lock)
into two Asserts.
2. Much faster btree tuples deletion in the case when first on page
index tuple is deleted (no movement to the left page(s)).
3. Remember blkno of new root page in BTPageOpaque of
left/right siblings when root page is splitted.
no longer returns buffer pointer, can be gotten from scan;
descriptor; bootstrap can create multi-key indexes;
pg_procname index now is multi-key index; oidint2, oidint4, oidname
are gone (must be removed from regression tests); use System Cache
rather than sequential scan in many places; heap_modifytuple no
longer takes buffer parameter; remove unused buffer parameter in
a few other functions; oid8 is not index-able; remove some use of
single-character variable names; cleanup Buffer variables usage
and scan descriptor looping; cleaned up allocation and freeing of
tuples; 18k lines of diff;
Attached you'll find a (big) patch that fixes make dep and make
depend in all Makefiles where I found it to be appropriate.
It also removes the dependency in Makefile.global for NAMEDATALEN
and OIDNAMELEN by making backend/catalog/genbki.sh and bin/initdb/initdb.sh
a little smarter.
This no longer requires initdb.sh that is turned into initdb with
a sed script when installing Postgres, hence initdb.sh should be
renamed to initdb (after the patch has been applied :-) )
This patch is against the 6.3 sources, as it took a while to
complete.
Please review and apply,
Cheers,
Jeroen van Vianen
Essentially, this cleans things up so that if PORTNAME isn't defined (I'm
working on getting rid of it for FreeBSD, at least, to see if its possible)
none of the PORTNAME related stuff gets passed around.
Had a little bit of -I related redundancy as well
Reply-To: hackers@hub.org, Dan McGuirk <mcguirk@indirect.com>
To: hackers@hub.org
Subject: [HACKERS] tmin writeback optimization
I was doing some profiling of the backend, and noticed that during a certain
benchmark I was running somewhere between 30% and 75% of the backend's CPU
time was being spent in calls to TransactionIdDidCommit() from
HeapTupleSatisfiesNow() or HeapTupleSatisfiesItself() to determine that
changed rows' transactions had in fact been committed even though the rows'
tmin values had not yet been set.
When a query looks at a given row, it needs to figure out whether the
transaction that changed the row has been committed and hence it should pay
attention to the row, or whether on the other hand the transaction is still
in progress or has been aborted and hence the row should be ignored. If
a tmin value is set, it is known definitively that the row's transaction
has been committed. However, if tmin is not set, the transaction
referred to in xmin must be looked up in pg_log, and this is what the
backend was spending a lot of time doing during my benchmark.
So, implementing a method suggested by Vadim, I created the following
patch that, the first time a query finds a committed row whose tmin value
is not set, sets it, and marks the buffer where the row is stored as
dirty. (It works for tmax, too.) This doesn't result in the boost in
real time performance I was hoping for, however it does decrease backend
CPU usage by up to two-thirds in certain situations, so it could be
rather beneficial in high-concurrency settings.
It adds a WITH OIDS option to the copy command, which allows
dumping and loading of oids.
If a copy command tried to load in an oid that is greater than
its current system max oid, the system max oid is incremented. No
checking is done to see if other backends are running and have cached
oids.
pg_dump as its first step when using the -o (oid) option, will
copy in a dummy row to set the system max oid value so as rows are
loaded in, they are certain to be lower than the system oid.
pg_dump now creates indexes at the end to speed loading
Submitted by: Bruce Momjian <maillist@candle.pha.pa.us>