This removes a portion of infrastructure introduced by fe0a0b5 to allow
compilation of Postgres in environments where no strong random source is
available, meaning that there is no linking to OpenSSL and no
/dev/urandom (Windows having its own CryptoAPI). No systems shipped
this century lack /dev/urandom, and the buildfarm is actually not
testing this switch at all, so just remove it. This simplifies
particularly some backend code which included a fallback implementation
using shared memory, and removes a set of alternate regression output
files from pgcrypto.
Author: Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/20181230063219.GG608@paquier.xyz
Previously we just set the seed based on process ID and start timestamp.
Both those values are directly available within the session, and can
be found out or guessed by other users too, making the session's series
of random(3) values fairly predictable. Up to now, our backend-internal
uses of random(3) haven't seemed security-critical, but commit 88bdbd3f7
added one that potentially is: when using log_statement_sample_rate, a
user might be able to predict which of his SQL statements will get logged.
To improve this situation, upgrade the per-process seed initialization
method to use pg_strong_random() if available, greatly reducing the
predictability of the initial seed value. This adds a few tens of
microseconds to process start time, but since backend startup time is
at least a couple of milliseconds, that seems an acceptable price.
This means that pg_strong_random() needs to be able to run without
reliance on any backend infrastructure, since it will be invoked
before any of that is up. It was safe for that already, but adjust
comments and #include commands to make it clearer.
Discussion: https://postgr.es/m/3859.1545849900@sss.pgh.pa.us
At the end of recovery for the post-promotion process, a new history
file is created followed by the last partial segment of the previous
timeline. Based on the timing, the archiver would first try to archive
the last partial segment and then the history file. This can delay the
detection of a new timeline taken, particularly depending on the time it
takes to transfer the last partial segment as it delays the moment the
history file of the new timeline gets archived. This can cause promoted
standbys to use the same timeline as one already taken depending on the
circumstances if multiple instances look at archives at the same
location.
This commit changes the order of archiving so as history files are
archived in priority over other file types, which reduces the likelihood
of the same timeline being taken (still not reducing the window to
zero), and it makes the archiver behave more consistently with the
startup process doing its post-promotion business.
Author: David Steele
Reviewed-by: Michael Paquier, Kyotaro Horiguchi
Discussion: https://postgr.es/m/929068cf-69e1-bba2-9dc0-e05986aed471@pgmasters.net
Backpatch-through: 9.5
At least as far back as the 2008 spec, POSIX has defined strsignal(3)
for looking up descriptive strings for signal numbers. We hadn't gotten
the word though, and were still using the crufty old sys_siglist array,
which is in no standard even though most Unixen provide it.
Aside from not being formally standards-compliant, this was just plain
ugly because it involved #ifdef's at every place using the code.
To eliminate the #ifdef's, create a portability function pg_strsignal,
which wraps strsignal(3) if available and otherwise falls back to
sys_siglist[] if available. The set of Unixen with neither API is
probably empty these days, but on any platform with neither, you'll
just get "unrecognized signal". All extant callers print the numeric
signal number too, so no need to work harder than that.
Along the way, upgrade pg_basebackup's child-error-exit reporting
to match the rest of the system.
Discussion: https://postgr.es/m/25758.1544983503@sss.pgh.pa.us
Commit ffa4cbd62 added logic to detect SIGPIPE failure of a COPY child
process, but it only worked correctly if the SIGPIPE occurred in the
immediate child process. Depending on the shell in use and the
complexity of the shell command string, we might instead get back
an exit code of 128 + SIGPIPE, representing a shell error exit
reporting SIGPIPE in the child process.
We could just hack up ClosePipeToProgram() to add the extra case,
but it seems like this is a fairly general issue deserving a more
general and better-documented solution. I chose to add a couple
of functions in src/common/wait_error.c, which is a natural place
to know about wait-result encodings, that will test for either a
specific child-process signal type or any child-process signal failure.
Then, adjust other places that were doing ad-hoc tests of this type
to use the common functions.
In RestoreArchivedFile, this fixes a race condition affecting whether
the process will report an error or just silently proc_exit(1): before,
that depended on whether the intermediate shell got SIGTERM'd itself
or reported a child process failing on SIGTERM.
Like the previous patch, back-patch to v10; we could go further
but there seems no real need to.
Per report from Erik Rijkers.
Discussion: https://postgr.es/m/f3683f87ab1701bea5d86a7742b22432@xs4all.nl
When a WAL segment is recycled, its ".ready" and ".done" status files
get also automatically removed, however this is not done in a durable
manner. Hence, in a subsequent crash, it could be possible that a
".ready" status file is still around with its corresponding segment
already gone.
If the backend reaches such a state, the archive command would most
likely complain about a segment non-existing and would keep retrying,
causing WAL segments to bloat pg_wal/, potentially making Postgres crash
hard when running out of space.
As status files are removed after each individual segment, using
durable_unlink() does not completely close the window either, as a crash
could happen between the moment the WAL segment is recycled and the
moment its status files are removed. This has also some performance
impact with the additional fsync() calls needed to make the removal in a
durable manner. Doing the cleanup at recovery is not cost-free either
as this makes crash recovery potentially take longer than necessary.
So, instead, as per an idea of Stephen Frost, make the archiver aware of
orphan status files and remove them on-the-fly if the corresponding
segment goes missing. Removal failures follow a model close to what
happens for WAL segments, where multiple attempts are done before giving
up temporarily, and where a successful orphan removal makes the archiver
move immediately to the next WAL segment thought as ready to be
archived.
Author: Michael Paquier
Reviewed-by: Nathan Bossart, Andres Freund, Stephen Frost, Kyotaro
Horiguchi
Discussion: https://postgr.es/m/20180928032827.GF1500@paquier.xyz
Users of the WaitEventSet and WaitLatch() APIs can now choose between
asking for WL_POSTMASTER_DEATH and then handling it explicitly, or asking
for WL_EXIT_ON_PM_DEATH to trigger immediate exit on postmaster death.
This reduces code duplication, since almost all callers want the latter.
Repair all code that was previously ignoring postmaster death completely,
or requesting the event but ignoring it, or requesting the event but then
doing an unconditional PostmasterIsAlive() call every time through its
event loop (which is an expensive syscall on platforms for which we don't
have USE_POSTMASTER_DEATH_SIGNAL support).
Assert that callers of WaitLatchXXX() under the postmaster remember to
ask for either WL_POSTMASTER_DEATH or WL_EXIT_ON_PM_DEATH, to prevent
future bugs.
The only process that doesn't handle postmaster death is syslogger. It
waits until all backends holding the write end of the syslog pipe
(including the postmaster) have closed it by exiting, to be sure to
capture any parting messages. By using the WaitEventSet API directly
it avoids the new assertion, and as a by-product it may be slightly
more efficient on platforms that have epoll().
Author: Thomas Munro
Reviewed-by: Kyotaro Horiguchi, Heikki Linnakangas, Tom Lane
Discussion: https://postgr.es/m/CAEepm%3D1TCviRykkUb69ppWLr_V697rzd1j3eZsRMmbXvETfqbQ%40mail.gmail.com,
https://postgr.es/m/CAEepm=2LqHzizbe7muD7-2yHUbTOoF7Q+qkSD5Q41kuhttRTwA@mail.gmail.com
Previously tables declared WITH OIDS, including a significant fraction
of the catalog tables, stored the oid column not as a normal column,
but as part of the tuple header.
This special column was not shown by default, which was somewhat odd,
as it's often (consider e.g. pg_class.oid) one of the more important
parts of a row. Neither pg_dump nor COPY included the contents of the
oid column by default.
The fact that the oid column was not an ordinary column necessitated a
significant amount of special case code to support oid columns. That
already was painful for the existing, but upcoming work aiming to make
table storage pluggable, would have required expanding and duplicating
that "specialness" significantly.
WITH OIDS has been deprecated since 2005 (commit ff02d0a05280e0).
Remove it.
Removing includes:
- CREATE TABLE and ALTER TABLE syntax for declaring the table to be
WITH OIDS has been removed (WITH (oids[ = true]) will error out)
- pg_dump does not support dumping tables declared WITH OIDS and will
issue a warning when dumping one (and ignore the oid column).
- restoring an pg_dump archive with pg_restore will warn when
restoring a table with oid contents (and ignore the oid column)
- COPY will refuse to load binary dump that includes oids.
- pg_upgrade will error out when encountering tables declared WITH
OIDS, they have to be altered to remove the oid column first.
- Functionality to access the oid of the last inserted row (like
plpgsql's RESULT_OID, spi's SPI_lastoid, ...) has been removed.
The syntax for declaring a table WITHOUT OIDS (or WITH (oids = false)
for CREATE TABLE) is still supported. While that requires a bit of
support code, it seems unnecessary to break applications / dumps that
do not use oids, and are explicit about not using them.
The biggest user of WITH OID columns was postgres' catalog. This
commit changes all 'magic' oid columns to be columns that are normally
declared and stored. To reduce unnecessary query breakage all the
newly added columns are still named 'oid', even if a table's column
naming scheme would indicate 'reloid' or such. This obviously
requires adapting a lot code, mostly replacing oid access via
HeapTupleGetOid() with access to the underlying Form_pg_*->oid column.
The bootstrap process now assigns oids for all oid columns in
genbki.pl that do not have an explicit value (starting at the largest
oid previously used), only oids assigned later by oids will be above
FirstBootstrapObjectId. As the oid column now is a normal column the
special bootstrap syntax for oids has been removed.
Oids are not automatically assigned during insertion anymore, all
backend code explicitly assigns oids with GetNewOidWithIndex(). For
the rare case that insertions into the catalog via SQL are called for
the new pg_nextoid() function can be used (which only works on catalog
tables).
The fact that oid columns on system tables are now normal columns
means that they will be included in the set of columns expanded
by * (i.e. SELECT * FROM pg_class will now include the table's oid,
previously it did not). It'd not technically be hard to hide oid
column by default, but that'd mean confusing behavior would either
have to be carried forward forever, or it'd cause breakage down the
line.
While it's not unlikely that further adjustments are needed, the
scope/invasiveness of the patch makes it worthwhile to get merge this
now. It's painful to maintain externally, too complicated to commit
after the code code freeze, and a dependency of a number of other
patches.
Catversion bump, for obvious reasons.
Author: Andres Freund, with contributions by John Naylor
Discussion: https://postgr.es/m/20180930034810.ywp2c7awz7opzcfr@alap3.anarazel.de
Setting them to SIG_IGN seems unlikely to have any beneficial effect
on that platform, and given the signal numbering collision with SIGABRT,
it could easily have bad effects.
Given the lack of field complaints that can be traced to this, I don't
presently feel a need to back-patch.
Discussion: https://postgr.es/m/5627.1542477392@sss.pgh.pa.us
For reasons lost in the mists of time, most postmaster child processes
reset SIGTTIN/SIGTTOU signal handling to SIG_DFL, with the major exception
that backend sessions do not. It seems like a pretty bad idea for any
postmaster children to do that: if stderr is connected to the terminal,
and the user has put the postmaster in background, any log output would
result in the child process freezing up. Hence, switch them all to
doing what backends do, ie, nothing. This allows them to inherit the
postmaster's SIG_IGN setting. On the other hand, manually-launched
processes such as standalone backends will have default processing,
which seems fine.
In passing, also remove useless resets of SIGCONT and SIGWINCH signal
processing. Perhaps the postmaster once changed those to something
besides SIG_DFL, but it doesn't now, so these are just wasted (and
confusing) syscalls.
Basically, this propagates the changes made in commit 8e2998d8a from
backends to other postmaster children. Probably the only reason these
calls now exist elsewhere is that I missed changing pgstat.c along with
postgres.c at the time.
Given the lack of field complaints that can be traced to this, I don't
presently feel a need to back-patch.
Discussion: https://postgr.es/m/5627.1542477392@sss.pgh.pa.us
Commit 197e4af9 refactored the initialization of the libc random()
seed, but reduced the number of possible seeds values that could be
chosen in a given time period. This negation of the effects of
commit 98c50656c was unintentional. Replace with code that
shifts the fast moving timestamp bits left, similar to the original
algorithm (though not the previous float-tolerating coding, which
is no longer necessary).
Author: Thomas Munro
Reported-by: Noah Misch
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/20181112083358.GA1073796%40rfd.leadboat.com
This function is able to promote a standby with this new SQL-callable
function. Execution access can be granted to non-superusers so that
failover tools can observe the principle of least privilege.
Catalog version is bumped.
Author: Laurenz Albe
Reviewed-by: Michael Paquier, Masahiko Sawada
Discussion: https://postgr.es/m/6e7c79b3ec916cf49742fb8849ed17cd87aed620.camel@cybertec.at
This changes the documentation, and the related structures so as
everything is consistent.
Some wait events were not listed alphabetically since their
introduction, others have been added rather randomly. Keeping all those
entries in order helps in maintenance, and helps the user looking at the
documentation.
Author: Michael Paquier, Kuntal Ghosh
Discussion: https://postgr.es/m/20181024002539.GI1658@paquier.xyz
Backpatch-through: 10, only for the documentation part to avoid an ABI
breakage.
Background workers, including parallel workers, were generating
the same sequence of numbers in random(). This showed up as DSM
handle collisions when Parallel Hash created multiple segments,
but any code that calls random() in background workers could be
affected if it cares about different backends generating different
numbers.
Repair by making sure that all new processes initialize the seed
at the same time as they set MyProcPid and MyStartTime in a new
function InitProcessGlobals(), called by the postmaster, its
children and also standalone processes. Also add a new high
resolution MyStartTimestamp as a potentially useful by-product,
and remove SessionStartTime from struct Port as it is now
redundant.
No back-patch for now, as the known consequences so far are just
a bunch of harmless shm_open(O_EXCL) collisions.
Author: Thomas Munro
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/CAEepm%3D2eJj_6%3DB%2B2tEpGu2nf1BjthCf9nXXUouYvJJ4C5WSwhg%40mail.gmail.com
The connection authorized message has quite a bit of useful information
in it, but didn't include the application_name (when provided), so let's
add that as it can be very useful.
Note that at the point where we're emitting the connection authorized
message, we haven't processed GUCs, so it's not possible to get this by
using log_line_prefix (which pulls from the GUC). There's also
something to be said for having this included in the connection
authorized message and then not needing to repeat it for every line, as
having it in log_line_prefix would do.
The GUC cleans the application name to pure-ascii, so do that here too,
but pull out the logic for cleaning up a string into its own function
in common and re-use it from those places, and check_cluster_name which
was doing the same thing.
Author: Don Seiler <don@seiler.us>
Discussion: https://postgr.es/m/CAHJZqBB_Pxv8HRfoh%2BAB4KxSQQuPVvtYCzMg7woNR3r7dfmopw%40mail.gmail.com
Currently there are two ways to trigger log rotation in logging collector
process: call pg_rotate_logfile() SQL-function or send SIGUSR1 signal directly
to logging collector process. However, it's nice to have more suitable way
for external tools to do that, which wouldn't require SQL connection or
knowledge of logging collector pid. This commit implements triggering log
rotation by "pg_ctl logrotate" command.
Discussion: https://postgr.es/m/20180416.115435.28153375.horiguchi.kyotaro%40lab.ntt.co.jp
Author: Kyotaro Horiguchi, Alexander Kuzmenkov, Alexander Korotkov
When a postmaster gets into its phase PM_STARTUP, it would start
background workers using BgWorkerStart_PostmasterStart mode immediately,
which would cause problems for a fast shutdown as the postmaster forgets
to send SIGTERM to already-started background workers. With smart and
immediate shutdowns, this correctly happened, and fast shutdown is the
only mode missing the shot.
Author: Alexander Kukushkin
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CAFh8B=mvnD8+DZUfzpi50DoaDfZRDfd7S=gwj5vU9GYn8UvHkA@mail.gmail.com
Backpatch-through: 9.5
The previous coding figured it'd be good enough to postpone opening
the first CSV log file until we got a message we needed to write there.
This is unsafe, though, because if the open fails we end up in infinite
recursion trying to report the failure. Instead make the CSV log file
management code look as nearly as possible like the longstanding logic
for the stderr log file. In particular, open it immediately at postmaster
startup (if enabled), or when we get a SIGHUP in which we find that
log_destination has been changed to enable CSV logging.
It seems OK to fail if a postmaster-start-time open attempt fails, as
we've long done for the stderr log file. But we can't die if we fail
to open a CSV log file during SIGHUP, so we're still left with a problem.
In that case, write any output meant for the CSV log file to the stderr
log file. (This will also cover race-condition cases in which backends
send CSV log data before or after we have the CSV log file open.)
This patch also fixes an ancient oversight that, if CSV logging was
turned off during a SIGHUP, we never actually closed the last CSV
log file.
In passing, remember to reset whereToSendOutput = DestNone during syslogger
start, since (unlike all other postmaster children) it's forked before the
postmaster has done that. This made for a platform-dependent difference
in error reporting behavior between the syslogger and other children:
except on Windows, it'd report problems to the original postmaster stderr
as well as the normal error log file(s). It's barely possible that that
was intentional at some point; but it doesn't seem likely to be desirable
in production, and the platform dependency definitely isn't desirable.
Per report from Alexander Kukushkin. It's been like this for a long time,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/CAFh8B==iLUD_gqC-dAENS0V+kVrCeGiKujtKqSQ7++S-caaChw@mail.gmail.com
Fix a small number of places that were testing the result of snprintf()
but doing so incorrectly. The right test for buffer overrun, per C99,
is "result >= bufsize" not "result > bufsize". Some places were also
checking for failure with "result == -1", but the standard only says
that a negative value is delivered on failure.
(Note that this only makes these places correct if snprintf() delivers
C99-compliant results. But at least now these places are consistent
with all the other places where we assume that.)
Also, make psql_start_test() and isolation_start_test() check for
buffer overrun while constructing their shell commands. There seems
like a higher risk of overrun, with more severe consequences, here
than there is for the individual file paths that are made elsewhere
in the same functions, so this seemed like a worthwhile change.
Also fix guc.c's do_serialize() to initialize errno = 0 before
calling vsnprintf. In principle, this should be unnecessary because
vsnprintf should have set errno if it returns a failure indication ...
but the other two places this coding pattern is cribbed from don't
assume that, so let's be consistent.
These errors are all very old, so back-patch as appropriate. I think
that only the shell command overrun cases are even theoretically
reachable in practice, but there's not much point in erroneous error
checks.
Discussion: https://postgr.es/m/17245.1534289329@sss.pgh.pa.us
Commit dafa084, added in 10, made the removal of temporary orphaned
tables more aggressive. This commit makes an extra step into the
aggressiveness by adding a flag in each backend's MyProc which tracks
down any temporary namespace currently in use. The flag is set when the
namespace gets created and can be reset if the temporary namespace has
been created in a transaction or sub-transaction which is aborted. The
flag value assignment is assumed to be atomic, so this can be done in a
lock-less fashion like other flags already present in PGPROC like
databaseId or backendId, still the fact that the temporary namespace and
table created are still locked until the transaction creating those
commits acts as a barrier for other backends.
This new flag gets used by autovacuum to discard more aggressively
orphaned tables by additionally checking for the database a backend is
connected to as well as its temporary namespace in-use, removing
orphaned temporary relations even if a backend reuses the same slot as
one which created temporary relations in a past session.
The base idea of this patch comes from Robert Haas, has been written in
its first version by Tsunakawa Takayuki, then heavily reviewed by me.
Author: Tsunakawa Takayuki
Reviewed-by: Michael Paquier, Kyotaro Horiguchi, Andres Freund
Discussion: https://postgr.es/m/0A3221C70F24FB45833433255569204D1F8A4DC6@G01JPEXMBYT05
Backpatch: 11-, as PGPROC gains a new flag and we don't want silent ABI
breakages on already released versions.
exit() is not async-signal safe. Even if the libc implementation is, 3rd
party libraries might have installed unsafe atexit() callbacks. After
receiving SIGQUIT, we really just want to exit as quickly as possible, so
we don't really want to run the atexit() callbacks anyway.
The original report by Jimmy Yih was a self-deadlock in startup_die().
However, this patch doesn't address that scenario; the signal handling
while waiting for the startup packet is more complicated. But at least this
alleviates similar problems in the SIGQUIT handlers, like that reported
by Asim R P later in the same thread.
Backpatch to 9.3 (all supported versions).
Discussion: https://www.postgresql.org/message-id/CAOMx_OAuRUHiAuCg2YgicZLzPVv5d9_H4KrL_OFsFP%3DVPekigA%40mail.gmail.com
Since commit c8e8b5a6e, this has been zeroed out using the wrong length.
In practice the length would always be too small, leading to not zeroing
the whole buffer rather than clobbering additional memory; and that's
pretty harmless, both because shmem would likely start out as zeroes
and because we'd reinitialize any given entry before use. Still,
it's bogus, so fix it.
Reported by Petru-Florin Mihancea (bug #15312)
Discussion: https://postgr.es/m/153363913073.1303.6518849192351268091@wrigleys.postgresql.org
Historically, we've allowed auxiliary processes to take buffer pins without
tracking them in a ResourceOwner. However, that creates problems for error
recovery. In particular, we've seen multiple reports of assertion crashes
in the startup process when it gets an error while holding a buffer pin,
as for example if it gets ENOSPC during a write. In a non-assert build,
the process would simply exit without releasing the pin at all. We've
gotten away with that so far just because a failure exit of the startup
process translates to a database crash anyhow; but any similar behavior
in other aux processes could result in stuck pins and subsequent problems
in vacuum.
To improve this, institute a policy that we must *always* have a resowner
backing any attempt to pin a buffer, which we can enforce just by removing
the previous special-case code in resowner.c. Add infrastructure to make
it easy to create a process-lifespan AuxProcessResourceOwner and clear
out its contents at appropriate times. Replace existing ad-hoc resowner
management in bgwriter.c and other aux processes with that. (Thus, while
the startup process gains a resowner where it had none at all before, some
other aux process types are replacing an ad-hoc resowner with this code.)
Also use the AuxProcessResourceOwner to manage buffer pins taken during
StartupXLOG and ShutdownXLOG, even when those are being run in a bootstrap
process or a standalone backend rather than a true auxiliary process.
In passing, remove some other ad-hoc resource owner creations that had
gotten cargo-culted into various other places. As far as I can tell
that was all unnecessary, and if it had been necessary it was incomplete,
due to lacking any provision for clearing those resowners later.
(Also worth noting in this connection is that a process that hasn't called
InitBufferPoolBackend has no business accessing buffers; so there's more
to do than just add the resowner if we want to touch buffers in processes
not covered by this patch.)
Although this fixes a very old bug, no back-patch, because there's no
evidence of any significant problem in non-assert builds.
Patch by me, pursuant to a report from Justin Pryzby. Thanks to
Robert Haas and Kyotaro Horiguchi for reviews.
Discussion: https://postgr.es/m/20180627233939.GA10276@telsasoft.com
When it comes to SELECT ... FOR or LOCK, NOWAIT means to not wait for
something to happen, and issue an error. SKIP LOCKED means to not wait
for something to happen but to move on without issuing an error. The
internal option of autovacuum and autoanalyze mentioned above, used only
when wraparound is not involved was named NOWAIT, but behaves like SKIP
LOCKED which is confusing.
Author: Nathan Bossart
Discussion: https://postgr.es/m/20180307050345.GA3095@paquier.xyz
This has been visibly a forgotten spot in the first implementation of
wait events for I/O added by 249cf07, and what has been missing is a
fsync call for WAL segments which is a wrapper reacting on the value of
GUC wal_sync_method.
Reported-by: Konstantin Knizhnik
Author: Konstantin Knizhnik
Reviewed-by: Craig Ringer, Michael Paquier
Discussion: https://postgr.es/m/4a243897-0ad8-f471-aa40-242591f2476e@postgrespro.ru
Andrew Gierth pointed out that commit 1c72ec6f4 would yield the wrong
answer on big-endian ARM systems, because the data being CRC'd would be
different. To fix that, and avoid the rather unsightly hard-wired
constant, simply compare the hardware and software implementations'
results.
While we're at it, also log the resulting decision at DEBUG1, and error
out if the hw and sw results unexpectedly differ. Also, since this
file must compile for both frontend and backend, avoid incorrect
dependencies on backend-only headers.
In passing, add a comment to postmaster.c about when the CRC function
pointer will get initialized.
Thomas Munro, based on complaints from Andrew Gierth and Tom Lane
Discussion: https://postgr.es/m/HE1PR0801MB1323D171938EABC04FFE7FA9E3110@HE1PR0801MB1323.eurprd08.prod.outlook.com
This change makes this module act more like most of our other low-level
resource management modules. It's a caller error if something is not
explicitly closed by the end of a successful transaction, so issue
a WARNING about it. This would not actually have caught the file leak
bug fixed in commit 231bcd080, because that was in a transaction-abort
path; but it still seems like a good, and pretty cheap, cross-check.
Discussion: https://postgr.es/m/152056616579.4966.583293218357089052@wrigleys.postgresql.org
This fixes a bug whereby the st_appname, st_clienthostname, and
st_activity_raw fields for auxiliary processes point beyond the end of
their respective shared memory segments. As a result, the application_name
of a backend might show up as the client hostname of an auxiliary process.
Backpatch to v10, where this bug was introduced, when the auxiliary
processes were added to the array.
Author: Edmund Horner
Reviewed-by: Michael Paquier
Discussion: https://www.postgresql.org/message-id/CAMyN-kA7aOJzBmrYFdXcc7Z0NmW%2B5jBaf_m%3D_-77uRNyKC9r%3DA%40mail.gmail.com
The other strings, application_name and query string, were snapshotted to
local memory in pgstat_read_current_status(), but we forgot to do that for
client hostnames. As a result, the client hostname would appear to change in
the local copy, if the client disconnected.
Backpatch to all supported versions.
Author: Edmund Horner
Reviewed-by: Michael Paquier
Discussion: https://www.postgresql.org/message-id/CAMyN-kA7aOJzBmrYFdXcc7Z0NmW%2B5jBaf_m%3D_-77uRNyKC9r%3DA%40mail.gmail.com
This reverts the backend sides of commit 1fde38beaa.
I have, at least for now, left the pg_verify_checksums tool in place, as
this tool can be very valuable without the rest of the patch as well,
and since it's a read-only tool that only runs when the cluster is down
it should be a lot safer.
Under EXEC BACKEND we also need to be going through the group privileges
setup since we do support that on Unixy systems, so add that to
SubPostmasterMain().
Under Windows, we need to simply return true from
GetDataDirectoryCreatePerm(), but that wasn't happening due to a missing
#else clause.
Per buildfarm.
Allow the cluster to be optionally init'd with read access for the
group.
This means a relatively non-privileged user can perform a backup of the
cluster without requiring write privileges, which enhances security.
The mode of PGDATA is used to determine whether group permissions are
enabled for directory and file creates. This method was chosen as it's
simple and works well for the various utilities that write into PGDATA.
Changing the mode of PGDATA manually will not automatically change the
mode of all the files contained therein. If the user would like to
enable group access on an existing cluster then changing the mode of all
the existing files will be required. Note that pg_upgrade will
automatically change the mode of all migrated files if the new cluster
is init'd with the -g option.
Tests are included for the backend and all the utilities which operate
on the PG data directory to ensure that the correct mode is set based on
the data directory permissions.
Author: David Steele <david@pgmasters.net>
Reviewed-By: Michael Paquier, with discussion amongst many others.
Discussion: https://postgr.es/m/ad346fe6-b23e-59f1-ecb7-0e08390ad629%40pgmasters.net
Consolidate directory and file create permissions for tools which work
with the PG data directory by adding a new module (common/file_perm.c)
that contains variables (pg_file_create_mode, pg_dir_create_mode) and
constants to initialize them (0600 for files and 0700 for directories).
Convert mkdir() calls in the backend to MakePGDirectory() if the
original call used default permissions (always the case for regular PG
directories).
Add tests to make sure permissions in PGDATA are set correctly by the
tools which modify the PG data directory.
Authors: David Steele <david@pgmasters.net>,
Adam Brightwell <adam.brightwell@crunchydata.com>
Reviewed-By: Michael Paquier, with discussion amongst many others.
Discussion: https://postgr.es/m/ad346fe6-b23e-59f1-ecb7-0e08390ad629%40pgmasters.net
This makes it possible to turn checksums on in a live cluster, without
the previous need for dump/reload or logical replication (and to turn it
off).
Enabling checkusm starts a background process in the form of a
launcher/worker combination that goes through the entire database and
recalculates checksums on each and every page. Only when all pages have
been checksummed are they fully enabled in the cluster. Any failure of
the process will revert to checksums off and the process has to be
started.
This adds a new WAL record that indicates the state of checksums, so
the process works across replicated clusters.
Authors: Magnus Hagander and Daniel Gustafsson
Review: Tomas Vondra, Michael Banck, Heikki Linnakangas, Andrey Borodin
THis adds a "flags" field to the BackgroundWorkerInitializeConnection()
and BackgroundWorkerInitializeConnectionByOid(). For now only one flag,
BGWORKER_BYPASS_ALLOWCONN, is defined, which allows the worker to ignore
datallowconn.
Autovacuum's 'workitem' request queue is of limited size, so requests
can fail if they arrive more quickly than autovacuum can process them.
Emit a log message when this happens, to provide better visibility of
this.
Backpatch to 10. While this represents an API change for
AutoVacuumRequestWork, that function is not yet prepared to deal with
external modules calling it, so there doesn't seem to be any risk (other
than log spam, that is.)
Author: Masahiko Sawada
Reviewed-by: Fabrízio Mello, Ildar Musin, Álvaro Herrera
Discussion: https://postgr.es/m/CAD21AoB1HrQhp6_4rTyHN5kWEJCEsG8YzsjZNt-ctoXSn5Uisw@mail.gmail.com
In databases with many tables, re-fetching the statistics takes some time,
so that this behavior seriously decreases the available concurrency for
multiple autovac workers. There's discussion afoot about more complete
fixes, but a simple and back-patchable amelioration is to claim the table
and release the lock before rechecking stats. If we find out there's no
longer a reason to process the table, re-taking the lock to un-claim the
table is cheap enough.
(This patch is quite old, but got lost amongst a discussion of more
aggressive fixes. It's not clear when or if such a fix will be
accepted, but in any case it'd be unlikely to get back-patched.
Let's do this now so we have some improvement for the back branches.)
In passing, make the normal un-claim step take AutovacuumScheduleLock
not AutovacuumLock, since that is what is documented to protect the
wi_tableoid field. This wasn't an actual bug in view of the fact that
readers of that field hold both locks, but it creates some concurrency
penalty against operations that need only AutovacuumLock.
Back-patch to all supported versions.
Jeff Janes
Discussion: https://postgr.es/m/26118.1520865816@sss.pgh.pa.us
We were independently checking ReservedBackends < MaxConnections and
max_wal_senders < MaxConnections, but because walsenders aren't allowed
to use superuser-reserved connections, that's really the wrong thing.
Correct behavior is to insist on ReservedBackends + max_wal_senders being
less than MaxConnections. Fix the code and associated documentation.
This has been wrong for a long time, but since the situation probably
hardly ever arises in the field (especially pre-v10, when the default
for max_wal_senders was zero), no back-patch.
Discussion: https://postgr.es/m/28271.1520195491@sss.pgh.pa.us
This makes the client programs behave as documented regardless of the
connect-time search_path and regardless of user-created objects. Today,
a malicious user with CREATE permission on a search_path schema can take
control of certain of these clients' queries and invoke arbitrary SQL
functions under the client identity, often a superuser. This is
exploitable in the default configuration, where all users have CREATE
privilege on schema "public".
This changes behavior of user-defined code stored in the database, like
pg_index.indexprs and pg_extension_config_dump(). If they reach code
bearing unqualified names, "does not exist" or "no schema has been
selected to create in" errors might appear. Users may fix such errors
by schema-qualifying affected names. After upgrading, consider watching
server logs for these errors.
The --table arguments of src/bin/scripts clients have been lax; for
example, "vacuumdb -Zt pg_am\;CHECKPOINT" performed a checkpoint. That
now fails, but for now, "vacuumdb -Zt 'pg_am(amname);CHECKPOINT'" still
performs a checkpoint.
Back-patch to 9.3 (all supported versions).
Reviewed by Tom Lane, though this fix strategy was not his first choice.
Reported by Arseniy Sharoglazov.
Security: CVE-2018-1058
To make this work, tuplesort.c and logtape.c must also support
parallelism, so this patch adds that infrastructure and then applies
it to the particular case of parallel btree index builds. Testing
to date shows that this can often be 2-3x faster than a serial
index build.
The model for deciding how many workers to use is fairly primitive
at present, but it's better than not having the feature. We can
refine it as we get more experience.
Peter Geoghegan with some help from Rushabh Lathia. While Heikki
Linnakangas is not an author of this patch, he wrote other patches
without which this feature would not have been possible, and
therefore the release notes should possibly credit him as an author
of this feature. Reviewed by Claudio Freire, Heikki Linnakangas,
Thomas Munro, Tels, Amit Kapila, me.
Discussion: http://postgr.es/m/CAM3SWZQKM=Pzc=CAHzRixKjp2eO5Q0Jg1SoFQqeXFQ647JiwqQ@mail.gmail.com
Discussion: http://postgr.es/m/CAH2-Wz=AxWqDoVvGU7dq856S4r6sJAj6DBn7VMtigkB33N5eyg@mail.gmail.com
The existing "connection authorized" server log messages used OpenSSL
API calls directly, even though similar abstracted API calls exist.
Change to use the latter instead.
Change the function prototype for the functions that return the TLS
version and the cipher to return const char * directly instead of
copying into a buffer. That makes them slightly easier to use.
Add bits= to the message. psql shows that, so we might as well show the
same information on the client and server.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Introduce parallel-aware hash joins that appear in EXPLAIN plans as Parallel
Hash Join with Parallel Hash. While hash joins could already appear in
parallel queries, they were previously always parallel-oblivious and had a
partial subplan only on the outer side, meaning that the work of the inner
subplan was duplicated in every worker.
After this commit, the planner will consider using a partial subplan on the
inner side too, using the Parallel Hash node to divide the work over the
available CPU cores and combine its results in shared memory. If the join
needs to be split into multiple batches in order to respect work_mem, then
workers process different batches as much as possible and then work together
on the remaining batches.
The advantages of a parallel-aware hash join over a parallel-oblivious hash
join used in a parallel query are that it:
* avoids wasting memory on duplicated hash tables
* avoids wasting disk space on duplicated batch files
* divides the work of building the hash table over the CPUs
One disadvantage is that there is some communication between the participating
CPUs which might outweigh the benefits of parallelism in the case of small
hash tables. This is avoided by the planner's existing reluctance to supply
partial plans for small scans, but it may be necessary to estimate
synchronization costs in future if that situation changes. Another is that
outer batch 0 must be written to disk if multiple batches are required.
A potential future advantage of parallel-aware hash joins is that right and
full outer joins could be supported, since there is a single set of matched
bits for each hashtable, but that is not yet implemented.
A new GUC enable_parallel_hash is defined to control the feature, defaulting
to on.
Author: Thomas Munro
Reviewed-By: Andres Freund, Robert Haas
Tested-By: Rafia Sabih, Prabhat Sahu
Discussion:
https://postgr.es/m/CAEepm=2W=cOkiZxcg6qiFQP-dHUe09aqTrEMM7yJDrHMhDv_RA@mail.gmail.comhttps://postgr.es/m/CAEepm=37HKyJ4U6XOLi=JgfSHM3o6B-GaeO-6hkOmneTDkH+Uw@mail.gmail.com
When a worker is flagged as BGW_NEVER_RESTART and we fail to start it,
or if it is not marked BGW_NEVER_RESTART but is terminated before
startup succeeds, what BgwHandleStatus should be reported? The
previous code really hadn't considered this possibility (as indicated
by the comments which ignore it completely) and would typically return
BGWH_NOT_YET_STARTED, but that's not a good answer, because then
there's no way for code using GetBackgroundWorkerPid() to tell the
difference between a worker that has not started but will start
later and a worker that has not started and will never be started.
So, when this case happens, return BGWH_STOPPED instead. Update the
comments to reflect this.
The preceding fix by itself is insufficient to fix the problem,
because the old code also didn't send a notification to the process
identified in bgw_notify_pid when startup failed. That might've
been technically correct under the theory that the status of the
worker was BGWH_NOT_YET_STARTED, because the status would indeed not
change when the worker failed to start, but now that we're more
usefully reporting BGWH_STOPPED, a notification is needed.
Without these fixes, code which starts background workers and then
uses the recommended APIs to wait for those background workers to
start would hang indefinitely if the postmaster failed to fork a
worker.
Amit Kapila and Robert Haas
Discussion: http://postgr.es/m/CAA4eK1KDfKkvrjxsKJi3WPyceVi3dH1VCkbTJji2fuwKuB=3uw@mail.gmail.com
This patch fixes a couple of low-probability bugs that could lead to
reporting an irrelevant errno value (and hence possibly a wrong SQLSTATE)
concerning directory-open or file-open failures. It also fixes places
where we took shortcuts in reporting such errors, either by using elog
instead of ereport or by using ereport but forgetting to specify an
errcode. And it eliminates a lot of just plain redundant error-handling
code.
In service of all this, export fd.c's formerly-static function
ReadDirExtended, so that external callers can make use of the coding
pattern
dir = AllocateDir(path);
while ((de = ReadDirExtended(dir, path, LOG)) != NULL)
if they'd like to treat directory-open failures as mere LOG conditions
rather than errors. Also fix FreeDir to be a no-op if we reach it
with dir == NULL, as such a coding pattern would cause.
Then, remove code at many call sites that was throwing an error or log
message for AllocateDir failure, as ReadDir or ReadDirExtended can handle
that job just fine. Aside from being a net code savings, this gets rid of
a lot of not-quite-up-to-snuff reports, as mentioned above. (In some
places these changes result in replacing a custom error message such as
"could not open tablespace directory" with more generic wording "could not
open directory", but it was agreed that the custom wording buys little as
long as we report the directory name.) In some other call sites where we
can't just remove code, change the error reports to be fully
project-style-compliant.
Also reorder code in restoreTwoPhaseData that was acquiring a lock
between AllocateDir and ReadDir; in the unlikely but surely not
impossible case that LWLockAcquire changes errno, AllocateDir failures
would be misreported. There is no great value in opening the directory
before acquiring TwoPhaseStateLock, so just do it in the other order.
Also fix CheckXLogRemoved to guarantee that it preserves errno,
as quite a number of call sites are implicitly assuming. (Again,
it's unlikely but I think not impossible that errno could change
during a SpinLockAcquire. If so, this function was broken for its
own purposes as well as breaking callers.)
And change a few places that were using not-per-project-style messages,
such as "could not read directory" when "could not open directory" is
more correct.
Back-patch the exporting of ReadDirExtended, in case we have occasion
to back-patch some fix that makes use of it; it's not needed right now
but surely making it global is pretty harmless. Also back-patch the
restoreTwoPhaseData and CheckXLogRemoved fixes. The rest of this is
essentially cosmetic and need not get back-patched.
Michael Paquier, with a bit of additional work by me
Discussion: https://postgr.es/m/CAB7nPqRpOCxjiirHmebEFhXVTK7V5Jvw4bz82p7Oimtsm3TyZA@mail.gmail.com
Previously, any attempt to request a 3.x protocol version other than
3.0 would lead to a hard connection failure, which made the minor
protocol version really no different from the major protocol version
and precluded gentle protocol version breaks. Instead, when the
client requests a 3.x protocol version where x is greater than 0, send
the new NegotiateProtocolVersion message to convey that we support
only 3.0. This makes it possible to introduce new minor protocol
versions without requiring a connection retry when the server is
older.
In addition, if the startup packet includes name/value pairs where
the name starts with "_pq_.", assume that those are protocol options,
not GUCs. Include those we don't support (i.e. all of them, at
present) in the NegotiateProtocolVersion message so that the client
knows they were not understood. This makes it possible for the
client to request previously-unsupported features without bumping
the protocol version at all; the client can tell from the server's
response whether the option was understood.
It will take some time before servers that support these new
facilities become common in the wild; to speed things up and make
things easier for a future 3.1 protocol version, back-patch to all
supported releases.
Robert Haas and Badrul Chowdhury
Discussion: http://postgr.es/m/BN6PR21MB0772FFA0CBD298B76017744CD1730@BN6PR21MB0772.namprd21.prod.outlook.com
Discussion: http://postgr.es/m/30788.1498672033@sss.pgh.pa.us
The lower case spellings are C and C++ standard and are used in most
parts of the PostgreSQL sources. The upper case spellings are only used
in some files/modules. So standardize on the standard spellings.
The APIs for ICU, Perl, and Windows define their own TRUE and FALSE, so
those are left as is when using those APIs.
In code comments, we use the lower-case spelling for the C concepts and
keep the upper-case spelling for the SQL concepts.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
In autovacuum's "work item" processing, a few strings were allocated in
the current transaction's memory context, which goes away during error
handling; if an error happened during execution of the work item, the
pfree() calls to clean up afterwards would try to release already-released
memory, possibly leading to a crash. In branch master, this was already
fixed by commit 335f3d04e4, so backpatch that to REL_10_STABLE to fix
the problem there too.
As a secondary problem, verify that the autovacuum worker is connected
to the right database for each work item; otherwise some items would be
discarded by workers in other databases.
Reported-by: Justin Pryzby
Discussion: https://postgr.es/m/20171014035732.GB31726@telsasoft.com
Not much to say about this; does what it says on the tin.
However, formerly, if there was a column list then the ANALYZE action was
implied; now it must be specified, or you get an error. This is because
it would otherwise be a bit unclear what the user meant if some tables
have column lists and some don't.
Nathan Bossart, reviewed by Michael Paquier and Masahiko Sawada, with some
editorialization by me
Discussion: https://postgr.es/m/E061A8E3-5E3D-494D-94F0-E8A9B312BBFC@amazon.com
All postgres internal usages are replaced, it's just libpq example
usages that haven't been converted. External users of libpq can't
generally rely on including postgres internal headers.
Note that this includes replacing open-coded byte swapping of 64bit
integers (using two 32 bit swaps) with a single 64bit swap.
Where it looked applicable, I have removed netinet/in.h and
arpa/inet.h usage, which previously provided the relevant
functionality. It's perfectly possible that I missed other reasons for
including those, the buildfarm will tell.
Author: Andres Freund
Discussion: https://postgr.es/m/20170927172019.gheidqy6xvlxb325@alap3.anarazel.de
Add bgw_type field to background worker structure. It is intended to be
set to the same value for all workers of the same type, so they can be
grouped in pg_stat_activity, for example.
The backend_type column in pg_stat_activity now shows bgw_type for a
background worker. The ps listing also no longer calls out that a
process is a background worker but just show the bgw_type. That way,
being a background worker is more of an implementation detail now that
is not shown to the user. However, most log messages still refer to
'background worker "%s"'; otherwise constructing sensible and
translatable log messages would become tricky.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Invoke vacuum(), as well as "work item" processing, in the PortalContext
that do_autovacuum() has manufactured, which will be reset before each
such invocation. This ensures cleanup of any memory leaked by these
operations. It also avoids the rather dangerous practice of calling
vacuum() in a context that vacuum() itself will destroy while it runs.
There's no known live bug there, but it's not hard to imagine introducing
one if we leave it like this.
Tom Lane, reviewed by Michael Paquier and Alvaro Herrera
Discussion: https://postgr.es/m/13849.1506114543@sss.pgh.pa.us
Remove gratuitous differences in the process names shown in
pg_stat_activity.backend_type and the ps output.
Reviewed-by: Takayuki Tsunakawa <tsunakawa.takay@jp.fujitsu.com>
For performance reasons a larger segment size than the default 16MB
can be useful. A larger segment size has two main benefits: Firstly,
in setups using archiving, it makes it easier to write scripts that
can keep up with higher amounts of WAL, secondly, the WAL has to be
written and synced to disk less frequently.
But at the same time large segment size are disadvantageous for
smaller databases. So far the segment size had to be configured at
compile time, often making it unrealistic to choose one fitting to a
particularly load. Therefore change it to a initdb time setting.
This includes a breaking changes to the xlogreader.h API, which now
requires the current segment size to be configured. For that and
similar reasons a number of binaries had to be taught how to recognize
the current segment size.
Author: Beena Emerson, editorialized by Andres Freund
Reviewed-By: Andres Freund, David Steele, Kuntal Ghosh, Michael
Paquier, Peter Eisentraut, Robert Hass, Tushar Ahuja
Discussion: https://postgr.es/m/CAOG9ApEAcQ--1ieKbhFzXSQPw_YLmepaa4hNdnY5+ZULpt81Mw@mail.gmail.com
The use of strnlen rather than strlen was just paranoia. Instead of
giving up on the paranoia, just implement the safeguard
differently. And add a comment explaining why we're careful.
Author: Andres Freund
Discussion: https://postgr.es/m/E1duOkJ-0001Mc-U5@gemulon.postgresql.org
Previously multi-byte aware truncation was done on every
pgstat_report_activity() call - proving to be a bottleneck for
workloads with long query strings that execute quickly.
Instead move the truncation to the read side, which commonly is
executed far less frequently. That's possible because all server
encodings allow to determine the length of a multi-byte string from
the first byte.
Rename PgBackendStatus.st_activity to st_activity_raw so existing
extension users of the field break - their code has to be adjusted to
use pgstat_clip_activity().
Author: Andres Freund
Tested-By: Khuntal Ghosh
Reviewed-By: Robert Haas, Tom Lane
Discussion: https://postgr.es/m/20170912071948.pa7igbpkkkviecpz@alap3.anarazel.de
The bug was caused by not re-reading the control file during crash
recovery restarts, which lead to an attempt to pfree() shared memory
contents. The fix is to re-read the control file, which seems good
anyway.
It's unclear as of this moment, whether we want to keep the
refactoring introduced in the commit referenced above, or come up with
an alternative approach. But fixing the bug in the mean time seems
like a good idea regardless.
A followup commit will introduce regression test coverage for crash
restarts.
Reported-By: Tom Lane
Discussion: https://postgr.es/m/14134.1505572349@sss.pgh.pa.us
Previously we read the control file in multiple places. But soon the
segment size will be configurable and stored in the control file, and
that needs to be available earlier than it currently is needed.
Instead of adding yet another place where it's read, refactor things
so there's a single processing of the control file during startup (in
EXEC_BACKEND that's every individual backend's startup).
Author: Andres Freund
Discussion: http://postgr.es/m/20170913092828.aozd3gvvmw67gmyc@alap3.anarazel.de
Commit 0e141c0fbb introduced a mechanism
to reduce contention on ProcArrayLock by having a single process clear
XIDs in the procArray on behalf of multiple processes, reducing the
need to hand the lock around. A previous attempt to introduce a similar
mechanism for CLogControlLock in ccce90b398
crashed and burned, but the design problem which resulted in those
failures is believed to have been corrected in this version.
Amit Kapila, with some cosmetic changes by me. See the previous commit
message for additional credits.
Discussion: http://postgr.es/m/CAA4eK1KudxzgWhuywY_X=yeSAhJMT4DwCjroV5Ay60xaeB2Eew@mail.gmail.com
The initial implementation of autovacuum work-items used a dynamic
shared memory area (DSA). However, it's argued that dynamic shared
memory is not portable enough, so we cannot rely on it being supported
everywhere; at the same time, autovacuum work-items are now a critical
part of the server, so it's not acceptable that they don't work in the
cases where dynamic shared memory is disabled. Therefore, let's fall
back to a simpler implementation of work-items that just uses
autovacuum's main shared memory segment for storage.
Discussion: https://postgr.es/m/CA+TgmobQVbz4K_+RSmiM9HeRKpy3vS5xnbkL95gSEnWijzprKQ@mail.gmail.com
The original code (since 00e6a16d01) was assuming aborting the
transaction in autovacuum launcher was sufficient to release all
resources, but in reality the launcher runs quite a lot of code out of
any transactions. Re-introduce individual cleanup calls to make abort
more robust.
Reported-by: Robert Haas
Discussion: https://postgr.es/m/CA+TgmobQVbz4K_+RSmiM9HeRKpy3vS5xnbkL95gSEnWijzprKQ@mail.gmail.com
Similar to what was fixed in commit 9915de6c1c for replication slots,
but this time it's related to replication origins: DROP SUBSCRIPTION
attempts to drop the replication origin, but that fails if the
replication worker process hasn't yet marked it unused. This causes
failures in the buildfarm:
ERROR: could not drop replication origin with OID 1, in use by PID 34069
Like the aforementioned commit, fix by having the process running DROP
SUBSCRIPTION sleep until the worker marks the the replication origin
struct as free. This uses a condition variable on each replication
origin shmem state struct, so that the session trying to drop can sleep
and expect to be awakened by the process keeping the origin open.
Also fix a SGML markup in the previous commit.
Discussion: https://postgr.es/m/20170808001433.rozlseaf4m2wkw3n@alvherre.pgsql
In commit 9915de6c1c, we introduced a new wait point for replication
slots and incorrectly labelled it as wait event PG_WAIT_LOCK. That's
wrong, so invent an appropriate new wait event instead, and document it
properly.
While at it, fix numerous other problems in the vicinity:
- two different walreceiver wait events were being mixed up in a single
wait event (which wasn't documented either); split it out so that they
can be distinguished, and document the new events properly.
- ParallelBitmapPopulate was documented but didn't exist.
- ParallelBitmapScan was not documented (I think this should be called
"ParallelBitmapScanInit" instead.)
- Logical replication wait events weren't documented
- various symbols had been added in dartboard order in various places.
Put them in alphabetical order instead, as was originally intended.
Discussion: https://postgr.es/m/20170808181131.mu4fjepuh5m75cyq@alvherre.pgsql
We've heard occasional reports of backend launch failing because
pgwin32_ReserveSharedMemoryRegion() fails, indicating that something
has already used that address space in the child process. It's not
very clear what, given that we disable ASLR in Windows builds, but
suspicion falls on antivirus products. It'd be better if we didn't
have to disable ASLR, anyway. So let's try to ameliorate the problem
by retrying the process launch after such a failure, up to 100 times.
Patch by me, based on previous work by Amit Kapila and others.
This is a longstanding issue, so back-patch to all supported branches.
Discussion: https://postgr.es/m/CAA4eK1+R6hSx6t_yvwtx+NRzneVp+MRqXAdGJZChcau8Uij-8g@mail.gmail.com
Traditionally, "pg_ctl start -w" has waited for the server to become
ready to accept connections by attempting a connection once per second.
That has the major problem that connection issues (for instance, a
kernel packet filter blocking traffic) can't be reliably told apart
from server startup issues, and the minor problem that if server startup
isn't quick, we accumulate "the database system is starting up" spam
in the server log. We've hacked around many of the possible connection
issues, but it resulted in ugly and complicated code in pg_ctl.c.
In commit c61559ec3, I changed the probe rate to every tenth of a second.
That prompted Jeff Janes to complain that the log-spam problem had become
much worse. In the ensuing discussion, Andres Freund pointed out that
we could dispense with connection attempts altogether if the postmaster
were changed to report its status in postmaster.pid, which "pg_ctl start"
already relies on being able to read. This patch implements that, teaching
postmaster.c to report a status string into the pidfile at the same
state-change points already identified as being of interest for systemd
status reporting (cf commit 7d17e683f). pg_ctl no longer needs to link
with libpq at all; all its functions now depend on reading server files.
In support of this, teach AddToDataDirLockFile() to allow addition of
postmaster.pid lines in not-necessarily-sequential order. This is needed
on Windows where the SHMEM_KEY line will never be written at all. We still
have the restriction that we don't want to truncate the pidfile; document
the reasons for that a bit better.
Also, fix the pg_ctl TAP tests so they'll notice if "start -w" mode
is broken --- before, they'd just wait out the sixty seconds until
the loop gives up, and then report success anyway. (Yes, I found that
out the hard way.)
While at it, arrange for pg_ctl to not need to #include miscadmin.h;
as a rather low-level backend header, requiring that to be compilable
client-side is pretty dubious. This requires moving the #define's
associated with the pidfile into a new header file, and moving
PG_BACKEND_VERSIONSTR someplace else. For lack of a clearly better
"someplace else", I put it into port.h, beside the declaration of
find_other_exec(), since most users of that macro are passing the value to
find_other_exec(). (initdb still depends on miscadmin.h, but at least
pg_ctl and pg_upgrade no longer do.)
In passing, fix main.c so that PG_BACKEND_VERSIONSTR actually defines the
output of "postgres -V", which remarkably it had never done before.
Discussion: https://postgr.es/m/CAMkU=1xJW8e+CTotojOMBd-yzUvD0e_JZu2xHo=MnuZ4__m7Pg@mail.gmail.com
When a walreceiver dies, the startup process will notice that and send
a PMSIGNAL_START_WALRECEIVER signal to the postmaster, asking for a new
walreceiver to be launched. There's a race condition, which at least
in HEAD is very easy to hit, whereby the postmaster might see that
signal before it processes the SIGCHLD from the walreceiver process.
In that situation, sigusr1_handler() just dropped the start request
on the floor, reasoning that it must be redundant. Eventually, after
10 seconds (WALRCV_STARTUP_TIMEOUT), the startup process would make a
fresh request --- but that's a long time if the connection could have
been re-established almost immediately.
Fix it by setting a state flag inside the postmaster that we won't
clear until we do launch a walreceiver. In cases where that results
in an extra walreceiver launch, it's up to the walreceiver to realize
it's unwanted and go away --- but we have, and need, that logic anyway
for the opposite race case.
I came across this through investigating unexpected delays in the
src/test/recovery TAP tests: it manifests there in test cases where
a master server is stopped and restarted while leaving streaming
slaves active.
This logic has been broken all along, so back-patch to all supported
branches.
Discussion: https://postgr.es/m/21344.1498494720@sss.pgh.pa.us
The stats collector disregards inquiry messages that bear a cutoff_time
before when it last wrote the relevant stats file. That's fine, but at
startup when it reads the "permanent" stats files, it absorbed their
timestamps as if they were the times at which the corresponding temporary
stats files had been written. In reality, of course, there's no data
out there at all. This led to disregarding inquiry messages soon after
startup if the postmaster had been shut down and restarted within less
than PGSTAT_STAT_INTERVAL; which is a pretty common scenario, both for
testing and in the field. Requesting backends would hang for 10 seconds
and then report failure to read statistics, unless they got bailed out
by some other backend coming along and making a newer request within
that interval.
I came across this through investigating unexpected delays in the
src/test/recovery TAP tests: it manifests there because the autovacuum
launcher hangs for 10 seconds when it can't get statistics at startup,
thus preventing a second shutdown from occurring promptly. We might
want to do some things in the autovac code to make it less prone to
getting stuck that way, but this change is a good bug fix regardless.
In passing, also fix pgstat_read_statsfiles() to ensure that it
re-zeroes its global stats variables if they are corrupted by a
short read from the stats file. (Other reads in that function
go into temp variables, so that the issue doesn't arise.)
This has been broken since we created the separation between permanent
and temporary stats files in 8.4, so back-patch to all supported branches.
Discussion: https://postgr.es/m/16860.1498442626@sss.pgh.pa.us
The autovacuum launcher doesn't actually do anything with its DSA other
than creating it and attaching to it, but it's been observed that after
longjmp'ing to the standard error handling block (for example after
getting SIGINT) the autovacuum enters an infinite loop reporting that it
cannot attach to its DSA anymore (which is correct, because it's already
attached to it.) Fix by only attempting to attach if not already
attached.
I introduced this bug together with BRIN autosummarization in
7526e10224.
Reported-by: Yugo Nagata.
Author: Thomas Munro. I added the comment to go with it.
Discussion: https://postgr.es/m/20170621211538.0c9eae73.nagata@sraoss.co.jp
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The larger part of this patch replaces usages of MyProc->procLatch
with MyLatch. The latter works even early during backend startup,
where MyProc->procLatch doesn't yet. While the affected code
shouldn't run in cases where it's not initialized, it might get copied
into places where it might. Using MyLatch is simpler and a bit faster
to boot, so there's little point to stick with the previous coding.
While doing so I noticed some weaknesses around newly introduced uses
of latches that could lead to missed events, and an omitted
CHECK_FOR_INTERRUPTS() call in worker_spi.
As all the actual bugs are in v10 code, there doesn't seem to be
sufficient reason to backpatch this.
Author: Andres Freund
Discussion:
https://postgr.es/m/20170606195321.sjmenrfgl2nu6j63@alap3.anarazel.dehttps://postgr.es/m/20170606210405.sim3yl6vpudhmufo@alap3.anarazel.de
Backpatch: -
This reverts commit 086221cf6b, which
was made to master only.
The approach implemented in the above commit has some issues. While
those could easily be fixed incrementally, doing so would make
backpatching considerably harder, so instead first revert this patch.
Discussion: https://postgr.es/m/20170602002912.tqlwn4gymzlxpvs2@alap3.anarazel.de
Since commit 4e37b3e15, buildfarm member frogmouth has been failing
occasionally with symptoms indicating that some expected stats data is
getting dropped. The reason that that commit changed the behavior seems
probably to be that more data is getting shoved at the collector in a short
span of time. In current sources, the stats test's first session sends
about 9KB of data while exiting, which is probably the same as what was
sent just before wait_for_stats() in the previous test design. But now,
the test's second session is starting up concurrently, and it sends another
2KB (presumably reflecting its initial catalog accesses). Since frogmouth
is running on Windows XP, which reputedly has a default socket receive
buffer size of only 8KB, it is not very surprising if this has put us over
the threshold where the receive buffer can overflow and drop messages.
The same mechanism could very easily explain the intermittent stats test
failures we've been seeing for years, since background processes such
as the bgwriter will sometimes send data concurrently with all this, and
could thus cause occasional buffer overflows.
Hence, insert some code into pgstat_init() to increase the stats socket's
receive buffer size to 100KB if it's less than that. (On failure, emit a
LOG message, but keep going.) Modern systems seem to have default sizes
in the range of 100KB-250KB, but older platforms don't. I couldn't find
any platforms that wouldn't accept 100KB, so in theory this won't cause
any portability problems.
If this is successful at reducing the buildfarm failure rate in HEAD,
we should back-patch it, because it's certain that similar buffer overflows
happen in the field on platforms with small buffer sizes. Going forward,
there might be an argument for trying to increase the buffer size even
more, but let's take a baby step first.
Discussion: https://postgr.es/m/22173.1494788088@sss.pgh.pa.us
Code review for commit 090010f2e.
Fix cases where an elog(ERROR) partway through a function would leave the
persistent data structures in a corrupt state. pgstat_report_stat got this
wrong by invalidating PgStat_TableEntry structs before removing hashtable
entries pointing to them, and get_tabstat_entry got it wrong by ignoring
the possibility of palloc failure after it had already created a hashtable
entry.
Also, avoid leaking a memory context per transaction, which the previous
code did through misunderstanding hash_create's API. We do not need to
create a context to hold the hash table; hash_create will do that.
(The leak wasn't that large, amounting to only a memory context header
per iteration, but it's still surprising that nobody noticed it yet.)
Since 6ef2eba3f5 ("Skip checkpoints, archiving on idle systems."),
GetLastImportantRecPtr() is used to avoid performing superfluous
checkpoints, xlog switches, running-xact records when the system is
idle. Unfortunately the check concerning running-xact records had a
off-by-one error, leading to such records being potentially skipped
when only a single record has been inserted since the last
running-xact record.
An alternative approach would have been to change
GetLastImportantRecPtr()'s definition to point to the end of records,
but that would make the checkpoint code more complicated.
Author: Andres Freund
Discussion: https://postgr.es/m/20170505012447.wsrympaxnfis6ojt@alap3.anarazel.de
Backpatch: no, code only present in master
When the checkpointer writes the shutdown checkpoint, it checks
afterwards whether any WAL has been written since it started and throws
a PANIC if so. At that point, only walsenders are still active, so one
might think this could not happen, but walsenders can also generate WAL,
for instance in BASE_BACKUP and certain variants of
CREATE_REPLICATION_SLOT. So they can trigger this panic if such a
command is run while the shutdown checkpoint is being written.
To fix this, divide the walsender shutdown into two phases. First, the
postmaster sends a SIGUSR2 signal to all walsenders. The walsenders
then put themselves into the "stopping" state. In this state, they
reject any new commands. (For simplicity, we reject all new commands,
so that in the future we do not have to track meticulously which
commands might generate WAL.) The checkpointer waits for all walsenders
to reach this state before proceeding with the shutdown checkpoint.
After the shutdown checkpoint is done, the postmaster sends
SIGINT (previously unused) to the walsenders. This triggers the
existing shutdown behavior of sending out the shutdown checkpoint record
and then terminating.
Author: Michael Paquier <michael.paquier@gmail.com>
Reported-by: Fujii Masao <masao.fujii@gmail.com>
Previously, maybe_start_bgworker() would launch at most one bgworker
process per call, on the grounds that the postmaster might otherwise
neglect its other duties for too long. However, that seems overly
conservative, especially since bad effects only become obvious when
many hundreds of bgworkers need to be launched at once. On the other
side of the coin is that the existing logic could result in substantial
delay of bgworker launches, because ServerLoop isn't guaranteed to
iterate immediately after a signal arrives. (My attempt to fix that
by using pselect(2) encountered too many portability question marks,
and in any case could not help on platforms without pselect().)
One could also question the wisdom of using an O(N^2) processing
method if the system is intended to support so many bgworkers.
As a compromise, allow that function to launch up to 100 bgworkers
per call (and in consequence, rename it to maybe_start_bgworkers).
This will allow any normal parallel-query request for workers
to be satisfied immediately during sigusr1_handler, avoiding the
question of whether ServerLoop will be able to launch more promptly.
There is talk of rewriting the postmaster to use a WaitEventSet to
avoid the signal-response-delay problem, but I'd argue that this change
should be kept even after that happens (if it ever does).
Backpatch to 9.6 where parallel query was added. The issue exists
before that, but previous uses of bgworkers typically aren't as
sensitive to how quickly they get launched.
Discussion: https://postgr.es/m/4707.1493221358@sss.pgh.pa.us
This reverts commit 81069a9efc.
Buildfarm results suggest that some platforms have versions of pselect(2)
that are not merely non-atomic, but flat out non-functional. Revert the
use-pselect patch to confirm this diagnosis (and exclude the no-SA_RESTART
patch as the source of trouble). If it's so, we should probably look into
blacklisting specific platforms that have broken pselect.
Discussion: https://postgr.es/m/9696.1493072081@sss.pgh.pa.us
Traditionally we've unblocked signals, called select(2), and then blocked
signals again. The code expects that the select() will be cancelled with
EINTR if an interrupt occurs; but there's a race condition, which is that
an already-pending signal will be delivered as soon as we unblock, and then
when we reach select() there will be nothing preventing it from waiting.
This can result in a long delay before we perform any action that
ServerLoop was supposed to have taken in response to the signal. As with
the somewhat-similar symptoms fixed by commit 893902085, the main practical
problem is slow launching of parallel workers. The window for trouble is
usually pretty short, corresponding to one iteration of ServerLoop; but
it's not negligible.
To fix, use pselect(2) in place of select(2) where available, as that's
designed to solve exactly this problem. Where not available, we continue
to use the old way, and are no worse off than before.
pselect(2) has been required by POSIX since about 2001, so most modern
platforms should have it. A bigger portability issue is that some
implementations are said to be non-atomic, ie pselect() isn't really
any different from unblock/select/reblock. Still, we're no worse off
than before on such a platform.
There is talk of rewriting the postmaster to use a WaitEventSet and
not do signal response work in signal handlers, at which point this
could be reverted, since we'd be using a self-pipe to solve the race
condition. But that's not happening before v11 at the earliest.
Back-patch to 9.6. The problem exists much further back, but the
worst symptom arises only in connection with parallel query, so it
does not seem worth taking any portability risks in older branches.
Discussion: https://postgr.es/m/9205.1492833041@sss.pgh.pa.us
The postmaster keeps signals blocked everywhere except while waiting
for something to happen in ServerLoop(). The code expects that the
select(2) will be cancelled with EINTR if an interrupt occurs; without
that, followup actions that should be performed by ServerLoop() itself
will be delayed. However, some platforms interpret the SA_RESTART
signal flag as meaning that they should restart rather than cancel
the select(2). Worse yet, some of them restart it with the original
timeout delay, meaning that a steady stream of signal interrupts can
prevent ServerLoop() from iterating at all if there are no incoming
connection requests.
Observable symptoms of this, on an affected platform such as HPUX 10,
include extremely slow parallel query startup (possibly as much as
30 seconds) and failure to update timestamps on the postmaster's sockets
and lockfiles when no new connections arrive for a long time.
We can fix this by running the postmaster's signal handlers without
SA_RESTART. That would be quite a scary change if the range of code
where signals are accepted weren't so tiny, but as it is, it seems
safe enough. (Note that postmaster children do, and must, reset all
the handlers before unblocking signals; so this change should not
affect any child process.)
There is talk of rewriting the postmaster to use a WaitEventSet and
not do signal response work in signal handlers, at which point it might
be appropriate to revert this patch. But that's not happening before
v11 at the earliest.
Back-patch to 9.6. The problem exists much further back, but the
worst symptom arises only in connection with parallel query, so it
does not seem worth taking any portability risks in older branches.
Discussion: https://postgr.es/m/9205.1492833041@sss.pgh.pa.us
This corner case didn't behave nicely at all: the postmaster would
(partially) update its state as though the process had started
successfully, and be quite confused thereafter. Fix it to act
like the worker had crashed, instead.
In passing, refactor so that do_start_bgworker contains all the
state-change logic for bgworker launch, rather than just some of it.
Back-patch as far as 9.4. 9.3 contains similar logic, but it's just
enough different that I don't feel comfortable applying the patch
without more study; and the use of bgworkers in 9.3 was so small
that it doesn't seem worth the extra work.
transam/parallel.c is still entirely unprepared for the possibility
of bgworker startup failure, but that seems like material for a
separate patch.
Discussion: https://postgr.es/m/4905.1492813727@sss.pgh.pa.us
The POSIX standard does not say that the success return value for
fcntl(F_SETFD) and fcntl(F_SETFL) is zero; it says only that it's not -1.
We had several calls that were making the stronger assumption. Adjust
them to test specifically for -1 for strict spec compliance.
The standard further leaves open the possibility that the O_NONBLOCK
flag bit is not the only active one in F_SETFL's argument. Formally,
therefore, one ought to get the current flags with F_GETFL and store
them back with only the O_NONBLOCK bit changed when trying to change
the nonblock state. In port/noblock.c, we were doing the full pushup
in pg_set_block but not in pg_set_noblock, which is just weird. Make
both of them do it properly, since they have little business making
any assumptions about the socket they're handed. The other places
where we're issuing F_SETFL are working with FDs we just got from
pipe(2), so it's reasonable to assume the FDs' properties are all
default, so I didn't bother adding F_GETFL steps there.
Also, while pg_set_block deserves some points for trying to do things
right, somebody had decided that it'd be even better to cast fcntl's
third argument to "long". Which is completely loony, because POSIX
clearly says the third argument for an F_SETFL call is "int".
Given the lack of field complaints, these missteps apparently are not
of significance on any common platforms. But they're still wrong,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/30882.1492800880@sss.pgh.pa.us
We'd already recognized that we can't pass function pointers across process
boundaries for functions in loadable modules, since a shared library could
get loaded at different addresses in different processes. But actually the
practice doesn't work for functions in the core backend either, if we're
using EXEC_BACKEND. This is the cause of recent failures on buildfarm
member culicidae. Switch to passing a string function name in all cases.
Something like this needs to be back-patched into 9.6, but let's see
if the buildfarm likes it first.
Petr Jelinek, with a bunch of basically-cosmetic adjustments by me
Discussion: https://postgr.es/m/548f9c1d-eafa-e3fa-9da8-f0cc2f654e60@2ndquadrant.com
To prevent future bugs along the lines of the one corrected by commit
8ff518699f, or find any that remain
in the current code, add an Assert() that the difference between
parallel_register_count and parallel_terminate_count is in a sane
range.
Kuntal Ghosh, with considerable tidying-up by me, per a suggestion
from Neha Khatri. Reviewed by Tomas Vondra.
Discussion: http://postgr.es/m/CAFO0U+-E8yzchwVnvn5BeRDPgX2z9vZUxQ8dxx9c0XFGBC7N1Q@mail.gmail.com
Commit b460f5d669 failed to contemplate
the possibilit that a parallel worker registered before a crash would
be unregistered only after the crash; if that happened, we'd end up
with parallel_terminate_count > parallel_register_count and the
system would refuse to launch any more parallel workers.
The easiest way to fix that seems to be to forget BGW_NEVER_RESTART
workers in ResetBackgroundWorkerCrashTimes() rather than leaving them
around to be cleaned up after the conclusion of the restart, so that
they go away before rather than after shared memory is reset.
To make sure that this fix is water-tight, don't allow parallel
workers to be anything other than BGW_NEVER_RESTART, so that after
recovering from a crash, 0 is guaranteed to be the correct starting
value for parallel_register_count. The core code wouldn't do this
anyway, but somebody might try to do it in extension code.
Report by Thomas Vondra. Patch by me, reviewed by Kuntal Ghosh.
Discussion: http://postgr.es/m/CAGz5QC+AVEVS+3rBKRq83AxkJLMZ1peMt4nnrQwczxOrmo3CNw@mail.gmail.com
Previously, only VACUUM would cause a page range to get initially
summarized by BRIN indexes, which for some use cases takes too much time
since the inserts occur. To avoid the delay, have brininsert request a
summarization run for the previous range as soon as the first tuple is
inserted into the first page of the next range. Autovacuum is in charge
of processing these requests, after doing all the regular vacuuming/
analyzing work on tables.
This doesn't impose any new tasks on autovacuum, because autovacuum was
already in charge of doing summarizations. The only actual effect is to
change the timing, i.e. that it occurs earlier. For this reason, we
don't go any great lengths to record these requests very robustly; if
they are lost because of a server crash or restart, they will happen at
a later time anyway.
Most of the new code here is in autovacuum, which can now be told about
"work items" to process. This can be used for other things such as GIN
pending list cleaning, perhaps visibility map bit setting, both of which
are currently invoked during vacuum, but do not really depend on vacuum
taking place.
The requests are at the page range level, a granularity for which we did
not have SQL-level access; we only had index-level summarization
requests via brin_summarize_new_values(). It seems reasonable to add
SQL-level access to range-level summarization too, so add a function
brin_summarize_range() to do that.
Authors: Álvaro Herrera, based on sketch from Simon Riggs.
Reviewed-by: Thomas Munro.
Discussion: https://postgr.es/m/20170301045823.vneqdqkmsd4as4ds@alvherre.pgsql
On EXEC_BACKEND builds, this can fail if ASLR is in use.
Backpatch to 9.5. On master, completely remove the bgw_main field
completely, since there is no situation in which it is safe for an
EXEC_BACKEND build. On 9.6 and 9.5, leave the field intact to avoid
breaking things for third-party code that doesn't care about working
under EXEC_BACKEND. Prior to 9.5, there are no in-core bgworker
entrypoints.
Petr Jelinek, reviewed by me.
Discussion: http://postgr.es/m/09d8ad33-4287-a09b-a77f-77f8761adb5e@2ndquadrant.com
