consider_parallel_nestloop passed the wrong jointype down to its
subroutines for JOIN_UNIQUE_INNER cases (it should pass JOIN_INNER), and it
thought that it could pass paths other than innerrel->cheapest_total_path
to create_unique_path, which create_unique_path is not on board with.
These bugs would lead to assertion failures or other errors, suggesting
that this code path hasn't been tested much.
hash_inner_and_outer's code for parallel join effectively treated both
JOIN_UNIQUE_OUTER and JOIN_UNIQUE_INNER the same as JOIN_INNER (for
different reasons :-(), leading to incorrect plans that treated a semijoin
as if it were a plain join.
Michael Day submitted a test case demonstrating that hash_inner_and_outer
failed for JOIN_UNIQUE_OUTER, and I found the other cases through code
review.
Report: https://postgr.es/m/D0E8A029-D1AC-42E8-979A-5DE4A77E4413@rcmail.com
The documentation around the -b/--blobs option to pg_dump seemed to
imply that it might be possible to add blobs to a "schema-only" dump or
similar. Clarify that blobs are data and therefore will only be
included in dumps where data is being included, even when -b is used to
request blobs be included.
The -b option has been around since before 9.2, so back-patch to all
supported branches.
Discussion: https://postgr.es/m/20161119173316.GA13284@tamriel.snowman.net
An example in the psql documentation had an incorrect field name from
what the command actually produced.
Pointed out by Fabien COELHO
Back-patch to 9.6 where the example was added.
Discussion: https://postgr.es/m/alpine.DEB.2.20.1611291349400.19314@lancre
Commit 08dd23cec introduced an exception to the rule that extension member
objects can only be dropped as part of dropping the whole extension,
intending to allow such drops while running the extension's own creation or
update scripts. However, the exception was only applied at the outermost
recursion level, because it was modeled on a pre-existing check to ignore
dependencies on objects listed in pendingObjects. Bug #14434 from Philippe
Beaudoin shows that this is inadequate: in some cases we can reach an
extension member object by recursion from another one. (The bug concerns
the serial-sequence case; I'm not sure if there are other cases, but there
might well be.)
To fix, revert 08dd23cec's changes to findDependentObjects() and instead
apply the creating_extension exception regardless of stack level.
Having seen this example, I'm a bit suspicious that the pendingObjects
logic is also wrong and such cases should likewise be allowed at any
recursion level. However, changing that would interact in subtle ways
with the recursion logic (at least it would need to be moved to after the
recursing-from check). Given that the code's been like that a long time,
I'll refrain from touching it without a clear example showing it's wrong.
Back-patch to all active branches. In HEAD and 9.6, where suitable
test infrastructure exists, add a regression test case based on the
bug report.
Report: <20161125151448.6529.33039@wrigleys.postgresql.org>
Discussion: <13224.1480177514@sss.pgh.pa.us>
Instead of confusingly stating platform-dependent defaults for these
parameters in the comments in postgresql.conf.sample (with the main
entry being a lie on Linux), teach initdb to install the correct
platform-dependent value in postgresql.conf, similarly to the way
we handle other platform-dependent defaults. This won't do anything
for existing 9.6 installations, but since it's effectively only a
documentation improvement, that seems OK.
Since this requires initdb to have access to the default values,
move the #define's for those to pg_config_manual.h; the original
placement in bufmgr.h is unworkable because that file can't be
included by frontend programs.
Adjust the default value for wal_writer_flush_after so that it is 1MB
regardless of XLOG_BLCKSZ, conforming to what is stated in both the
SGML docs and postgresql.conf. (We could alternatively make it scale
with XLOG_BLCKSZ, but I'm not sure I see the point.)
Copy-edit related SGML documentation.
Fabien Coelho and Tom Lane, per a gripe from Tomas Vondra.
Discussion: <30ebc6e3-8358-09cf-44a8-578252938424@2ndquadrant.com>
Andreas Seltenreich found another case where we were being too optimistic
about allowing a plan to be considered parallelizable despite it containing
initPlans. It seems like the real issue here is that if we know we are
going to tack initPlans onto the topmost Plan node for a subquery, we
had better mark that subquery's result Paths as not-parallel-safe. That
fixes this problem and allows reversion of a kluge (added in commit
7b67a0a49 and extended in f24cf960d) to not trust the parallel_safe flag
at top level.
Discussion: <874m2w4k5d.fsf@ex.ansel.ydns.eu>
When dropping a foreign key constraint with ALTER TABLE DROP CONSTRAINT,
we refuse the drop if there are any pending trigger events on the named
table; this ensures that we won't remove the pg_trigger row that will be
consulted by those events. But we should make the same check for the
referenced relation, else we might remove a due-to-be-referenced pg_trigger
row for that relation too, resulting in "could not find trigger NNN" or
"relation NNN has no triggers" errors at commit. Per bug #14431 from
Benjie Gillam. Back-patch to all supported branches.
Report: <20161124114911.6530.31200@wrigleys.postgresql.org>
Previously, requesting commit timestamp for transactions
FrozenTransactionId and BootstrapTransactionId resulted in an error.
But since those values can validly appear in committed tuples' Xmin,
this behavior is unhelpful and error prone: each caller would have to
special-case those values before requesting timestamp data for an Xid.
We already have a perfectly good interface for returning "the Xid you
requested is too old for us to have commit TS data for it", so let's use
that instead.
Backpatch to 9.5, where commit timestamps appeared.
Author: Craig Ringer
Discussion: https://www.postgresql.org/message-id/CAMsr+YFM5Q=+ry3mKvWEqRTxrB0iU3qUSRnS28nz6FJYtBwhJg@mail.gmail.com
When rebuilding an existing index, ALTER TABLE correctly kept the
physical file in the same tablespace, but it messed up the pg_class
entry if the index had been in the database's default tablespace
and "default_tablespace" was set to some non-default tablespace.
This led to an inaccessible index.
Fix by fixing pg_get_indexdef_string() to always include a tablespace
clause, whether or not the index is in the default tablespace. The
previous behavior was installed in commit 537e92e41, and I think it just
wasn't thought through very clearly; certainly the possible effect of
default_tablespace wasn't considered. There's some risk in changing the
behavior of this function, but there are no other call sites in the core
code. Even if it's being used by some third party extension, it's fairly
hard to envision a usage that is okay with a tablespace clause being
appended some of the time but can't handle it being appended all the time.
Back-patch to all supported versions.
Code fix by me, investigation and test cases by Michael Paquier.
Discussion: <1479294998857-5930602.post@n3.nabble.com>
Before commit 906bfcad7, we were not actually processing the righthand
side of a multiple-column assignment in UPDATE as a row constructor:
it was just a parenthesized list of expressions. Call it that rather
than risking confusion by people who would expect the documented behaviors
of row constructors to apply.
Back-patch to 9.5; before that, the text correctly described the construct
as a "list of independent expressions".
Discussion: <16288.1479610770@sss.pgh.pa.us>
Create a section specifically for the syntactic rules around whole-row
variable usage, such as expansion of "foo.*". This was previously
documented only haphazardly, with some critical info buried in
unexpected places like xfunc-sql-composite-functions. Per repeated
questions in different mailing lists.
Discussion: <16288.1479610770@sss.pgh.pa.us>
There are assorted references to RETURNING in Part II, but nothing
that would qualify as an explanation of the feature, which seems
like an oversight considering how useful it is. Add something.
Noted while looking for a place to point a cross-reference to ...
A little COLLATE "C" goes a long way.
Pavel Stehule, per suggestion from Craig Ringer
Discussion: <CAFj8pRA8nJZcozgxN=RMSqMmKuHVOkcGAAKPKdFeiMWGDSUDLA@mail.gmail.com>
The code was intentionally not very careful about leaking strdup'd
strings in case of an error. That was forgivable probably, but it
also failed to notice strdup() failures, which could lead to subsequent
null-pointer-dereference crashes, since many callers unsurprisingly
didn't check for null pointers in the struct lconv fields. An even
worse problem is that it could throw error while we were setlocale'd
to a non-C locale, causing unwanted behavior in subsequent libc calls.
Rewrite to ensure that we cannot throw elog(ERROR) until after we've
restored the previous locale settings, or at least attempted to.
(I'm sorely tempted to make restore failure be a FATAL error, but
will refrain for the moment.) Having done that, it's not much more
work to ensure that we clean up strdup'd storage on the way out, too.
This code is substantially the same in all supported branches, so
back-patch all the way.
Michael Paquier and Tom Lane
Discussion: <CAB7nPqRMbGqa_mesopcn4MPyTs34eqtVEK7ELYxvvV=oqS00YA@mail.gmail.com>
We mustn't force parallel mode if the query has any subplans, since
ExecSerializePlan doesn't transmit them to workers. Testing
top_plan->initPlan is inadequate because (1) there might be initPlans
attached to lower plan nodes, and (2) non-initPlan subplans don't
work either. There's certainly room for improvement in those
restrictions, but for the moment that's what we've got.
Amit Kapila, per report from Andreas Seltenreich
Discussion: <8737im6pmh.fsf@credativ.de>
Because we use transformTargetList() for UPDATE as well as SELECT
tlists, the code accidentally tried to expand a "*" reference into
several columns. This is nonsensical, because the UPDATE syntax
provides exactly one target column to put the value into. The
immediate result was that transformUpdateTargetList() got confused
and reported "UPDATE target count mismatch --- internal error".
It seems better to treat such a reference as a plain whole-row
variable, as it would be in other contexts. (This could produce
useful results when the target column is of composite type.)
Fix by tweaking transformTargetList() to perform *-expansion only
conditionally, depending on its exprKind parameter.
Back-patch to 9.3. The problem exists further back, but a fix would be
much more invasive before that, because transformTargetList() wasn't
told what kind of list it was working on. Doesn't seem worth the
trouble given the lack of field reports. (I only noticed it because
I was checking the code while trying to improve the documentation about
how we handle "foo.*".)
Discussion: <4308.1479595330@sss.pgh.pa.us>
The serialization code dumped core for a string-valued GUC whose value
is NULL, which is a legal state. The infrastructure isn't capable of
transmitting that state exactly, but fortunately, transmitting an empty
string instead should be close enough (compare, eg, commit e45e990e4).
The code potentially underestimated the space required to format a
real-valued variable, both because it made an unwarranted assumption that
%g output would never be longer than %e output, and because it didn't count
right even for %e format. In practice this would pretty much always be
masked by overestimates for other variables, but it's still wrong.
Also fix boundary-case error in read_gucstate, incorrect handling of the
case where guc_sourcefile is non-NULL but zero length (not clear that can
happen, but if it did, this code would get totally confused), and
confusingly useless check for a NULL result from read_gucstate.
Andreas Seltenreich discovered the core dump; other issues noted while
reading nearby code. Back-patch to 9.5 where this code was introduced.
Michael Paquier and Tom Lane
Discussion: <871sy78wno.fsf@credativ.de>
Teach it not to complain if the dropStmt attached to an archive entry
is actually spelled CREATE OR REPLACE VIEW, since that will happen due to
an upcoming bug fix. Also, if it doesn't recognize a dropStmt, have it
print a WARNING and then emit the dropStmt unmodified. That seems like a
much saner behavior than Assert'ing or dumping core due to a null-pointer
dereference, which is what would happen before :-(.
Back-patch to 9.4 where this option was introduced.
Discussion: <19092.1479325184@sss.pgh.pa.us>
Replay of XLOG_BTREE_VACUUM during Hot Standby was previously thought to
require complex interlocking that matched the requirements on the
master. This required an O(N) operation that became a significant
problem with large indexes, causing replication delays of seconds or in
some cases minutes while the XLOG_BTREE_VACUUM was replayed.
This commit skips the “pin scan” that was previously required, by
observing in detail when and how it is safe to do so, with full
documentation. The pin scan is skipped only in replay; the VACUUM code
path on master is not touched here.
No tests included. Manual tests using an additional patch to view WAL records
and their timing have shown the change in WAL records and their handling has
successfully reduced replication delay.
This is a back-patch of commits 687f2cd7a0, 3e4b7d8798, b602842613
by Simon Riggs, to branches 9.4 and 9.5. No further backpatch is
possible because this depends on catalog scans being MVCC. I (Álvaro)
additionally updated a slight problem in the README, which explains why
this touches the 9.6 and master branches.
On Windows, libc will mask \r\n line endings for us, since we read the
password file in text mode. But that doesn't happen on Unix. People
who share password files across both systems might have \r\n line endings
in a file they use on Unix, so as a convenience, ignore trailing \r.
Per gripe from Josh Berkus.
In passing, put the existing check for empty line somewhere where it's
actually useful, ie after stripping the newline not before.
Vik Fearing, adjusted a bit by me
Discussion: <0de37763-5843-b2cc-855e-5d0e5df25807@agliodbs.com>
The CatalogSnapshot was not plugged into SnapshotResetXmin()'s accounting
for whether MyPgXact->xmin could be cleared or advanced. In normal
transactions this was masked by the fact that the transaction snapshot
would be older, but during backend startup and certain utility commands
it was possible to re-use the CatalogSnapshot after MyPgXact->xmin had
been cleared, meaning that recently-deleted rows could be pruned even
though this snapshot could still see them, causing unexpected catalog
lookup failures. This effect appears to be the explanation for a recent
failure on buildfarm member piculet.
To fix, add the CatalogSnapshot to the RegisteredSnapshots heap whenever
it is valid.
In the previous logic, it was possible for the CatalogSnapshot to remain
valid across waits for client input, but with this change that would mean
it delays advance of global xmin in cases where it did not before. To
avoid possibly causing new table-bloat problems with clients that sit idle
for long intervals, add code to invalidate the CatalogSnapshot before
waiting for client input. (When the backend is busy, it's unlikely that
the CatalogSnapshot would be the oldest snap for very long, so we don't
worry about forcing early invalidation of it otherwise.)
In passing, remove the CatalogSnapshotStale flag in favor of using
"CatalogSnapshot != NULL" to represent validity, as we do for the other
special snapshots in snapmgr.c. And improve some obsolete comments.
No regression test because I don't know a deterministic way to cause this
failure. But the stress test shown in the original discussion provokes
"cache lookup failed for relation 1255" within a few dozen seconds for me.
Back-patch to 9.4 where MVCC catalog scans were introduced. (Note: it's
quite easy to produce similar failures with the same test case in branches
before 9.4. But MVCC catalog scans were supposed to fix that.)
Discussion: <16447.1478818294@sss.pgh.pa.us>
Commit 3c4cf08087 should have removed SET TABLESPACE from the synopsis
of ALTER MATERIALIZE VIEW as a possible "action" when it added a
separate line for it in the main command listing, but failed to.
Repair.
Backpatch to 9.4, like the aforementioned commit.
The documentation for ts_headline() recommends using a sub-select to
avoid extra evaluations of ts_headline() in a query with ORDER BY+LIMIT.
Since commit 9118d03a8 this contortionism is unnecessary, so remove the
recommendation. Noted by Oleg Bartunov.
Discussion: <CAF4Au4w6rrH_j1bvVhzpOsRiHCog7sGJ3LSX0tY8ZdwhHT88LQ@mail.gmail.com>
Commit 23a27b039 widened these from uint32 to uint64, but I overlooked
that the documentation explicitly showed them as uint32. Per report
from Vicky Vergara.
Report: <20161111135422.8761.36733@wrigleys.postgresql.org>
The reloptions stuff allows this option to be set on a matview.
While it's questionable whether that is useful or was really intended,
it does work, and we shouldn't change that in minor releases. Commit
e3e66d8a9 disabled the option since I didn't realize that it was
possible for it to be set on a matview. Tweak the test to re-allow it.
Discussion: <19749.1478711862@sss.pgh.pa.us>
The plan generated for sorted partial aggregation with "GROUP BY constant"
included a Sort node with no sort keys, which the executor does not like.
Per report from Steve Randall. I'd add a regression test case if I could
think of a compact one, but it doesn't seem worth expending lots of cycles
on.
Report: <CABVd52UAdGXpg_rCk46egpNKYdXOzCjuJ1zG26E2xBe_8bj+Fg@mail.gmail.com>
In each case, absence of a trailing newline would itself constitute a
PostgreSQL bug. Therefore, this slightly enhances the changed tests.
This works around a bug that last appeared in Perl 5.8.8, fixing
src/test/modules/test_pg_dump when run against that version. Commit
e7293e3271 worked around the bug, but the
subsequent addition of test_pg_dump introduced affected code. As that
commit had shown, slight increases in pattern complexity can suppress
the bug. This commit edits qr/foo$/m patterns too complex to encounter
the bug today, for style consistency and robustness against unrelated
pattern changes. Back-patch to 9.6, where test_pg_dump was introduced.
As of this writing, a fresh MSYS installation includes an affected Perl
5.8.8. The Perl 5.8.8 in Red Hat Enterprise Linux 5.11 carries a patch
that renders it unaffected, but the Perl 5.8.5 of Red Hat Enterprise
Linux 4.4 is affected.
We really ought to make StdRdOptions and the other decoded forms of
reloptions self-identifying, but for the moment, assume that only plain
relations could possibly be user_catalog_tables. Fixes problem with bogus
"ON CONFLICT is not supported on table ... used as a catalog table" error
when target is a view with cascade option.
Discussion: <26681.1477940227@sss.pgh.pa.us>
This was already fixed in HEAD as part of 6ad8ac60 but was not
backpatched.
Also change the way pg_xlog is handled to be the same as the other
directories.
Patch from me with pg_xlog addition from Michael Paquier, test updates
from David Steele.
For a very long time, pltcl's spi_exec and spi_execp commands have had
a behavior of storing the current row number as an element of output
arrays, but this was never documented. Fix that.
For an equally long time, pltcl_trigger_handler had a behavior of silently
ignoring ".tupno" as an output column name, evidently so that the result
of spi_exec could be used directly as a trigger result tuple. Not sure
how useful that really is, but in any case it's bad that it would break
attempts to use ".tupno" as an actual column name. We can fix it by not
checking for ".tupno" until after we check for a column name match. This
comports with the effective behavior of spi_exec[p] that ".tupno" is only
magic when you don't have an actual column named that.
In passing, wordsmith the description of returning modified tuples from
a pltcl trigger.
Noted while working on Jim Nasby's patch to support composite results
from pltcl. The inability to return trigger tuples using ".tupno" as
a column name is a bug, so back-patch to all supported branches.
We must do this in case the expression evaluation results in calling
another plpgsql function (or, really, anything using SPI). I missed
the need for this when I converted exec_cast_value() from doing a
simple InputFunctionCall() to doing ExecEvalExpr() in commit 1345cc67b.
There is a SPI_push_conditional in InputFunctionCall(), so that there
was no bug before that.
Per bug #14414 from Marcos Castedo. Add a regression test based on his
example, which was that a plpgsql function in a domain check constraint
didn't work when assigning to a domain-type variable within plpgsql.
Report: <20161106010947.1387.66380@wrigleys.postgresql.org>
The workaround the IANA guys chose to get rid of the clang warning
we'd silenced in commit 23ed2ba81 turns out not to satisfy Coverity.
Go back to the previous solution, ie, remove the useless comparison
to SIZE_MAX. (In principle, there could be machines out there where
it's not useless because ptrdiff_t is wider than size_t. But the whole
thing is pretty academic anyway, as we could never approach this limit
for any sane estimate of the amount of data that zic will ever be asked
to work with.)
Also, s/lineno/lineno_t/g, because if we accept their decision to start
using "lineno" as a typedef, it is going to have very unpleasant
consequences in our next pgindent run. Noted that while fooling with
pltcl yesterday.
This patch absorbs some unreleased fixes for symlink manipulation bugs
introduced in tzcode 2016g. Ordinarily I'd wait around for a released
version, but in this case it seems like we could do with extra testing,
in particular checking whether it works in EDB's VMware build environment.
This corresponds to commit aec59156abbf8472ba201b6c7ca2592f9c10e077 in
https://github.com/eggert/tz.
Per a report from Sandeep Thakkar, building in an environment where hard
links are not supported in the timezone data installation directory failed,
because upstream code refactoring had broken the case of symlinking from an
existing symlink. Further experimentation also showed that the symlinks
were sometimes made incorrectly, with too many or too few "../"'s in the
symlink contents.
Back-patch of commit 1f87181e12.
Report: <CANFyU94_p6mqRQc2i26PFp5QAOQGB++AjGX=FO8LDpXw0GSTjw@mail.gmail.com>
Discussion: http://mm.icann.org/pipermail/tz/2016-November/024431.html
The foreign-key-aware logic for estimation of join sizes (added in commit
100340e2d) blindly tried to apply the concept to rels that are actually
parents of inheritance trees. This is just plain wrong so far as the
referenced relation is concerned, since the inheritance scan may well
produce lots of rows that are not participating in the constraint. It's
wrong for the referencing relation too, for the same reason; although on
that end we could conceivably detect whether all members of the inheritance
tree have equivalent FK constraints pointing to the same referenced rel,
and then proceed more or less as we do now. But pending somebody writing
code to do that, we must disable this, because it's producing completely
silly estimates when there's an FK linking the heads of inheritance trees.
Per bug #14404 from Clinton Adams. Back-patch to 9.6 where the new
estimation logic came in.
Report: <20161028200412.15987.96482@wrigleys.postgresql.org>
While converting expressions in an upper-level plan node so that they
reference Vars and expressions provided by the input plan node(s),
don't convert plain Const items, even if there happens to be a matching
Const in the input. It's silly to do so because a Var is more expensive to
execute than a Const. Moreover, converting can fool ExecCheckPlanOutput's
check that an insert or update query inserts nulls into dropped columns,
leading to "query provides a value for a dropped column" errors during
INSERT or UPDATE on a table with a dropped column. We could solve this
by making that check more complicated, but I don't see the point; this fix
should save a marginal number of cycles, and it also makes for less messy
EXPLAIN output, as shown by the ensuing regression test result changes.
Per report from Pavel Hanák. I have not incorporated a test case based
on that example, as there doesn't seem to be a simple way of checking
this in isolation without making a bunch of assumptions about other
planner and SQL-function behavior.
Back-patch to 9.6. This setrefs.c behavior exists much further back,
but there is not currently reason to think that it causes problems
before 9.6.
Discussion: <83shraampf.fsf@is-it.eu>
Somebody apparently thought that "if Int32GetDatum is good,
Int64GetDatum must be better". Per buildfarm failures now
that Peter has added some regression tests here.
tsquery_rewrite() tries to find matches to subsets of AND/OR conditions;
for example, in the query 'a | b | c' the substitution subquery 'a | c'
should match and lead to replacement of the first and third items.
That's fine, but the matching algorithm apparently takes about O(2^N)
for an N-clause query (I say "apparently" because the code is also both
unintelligible and uncommented). We could probably do better than that
even without any extra assumptions --- but actually, we know that the
subclauses are sorted, indeed are depending on that elsewhere in this very
same function. So we can just scan the two lists a single time to detect
matches, as though we were doing a merge join.
Also do a re-flattening call (QTNTernary()) in tsquery_rewrite_query, just
to make sure that the tree fits the expectations of the next search cycle.
I didn't try to devise a test case for this, but I'm pretty sure that the
oversight could have led to failure to match in some cases where a match
would be expected.
Improve comments, and also stick a CHECK_FOR_INTERRUPTS into
dofindsubquery, just in case it's still too slow for somebody.
Per report from Andreas Seltenreich. Back-patch to all supported branches.
Discussion: <8760oasf2y.fsf@credativ.de>
QTNTernary() contains logic to flatten, eg, '(a & b) & c' into 'a & b & c',
which is all well and good, but it tries to do that to NOT nodes as well,
so that '!!a' gets changed to '!a'. Explicitly restrict the conversion to
be done only on AND and OR nodes, and add a test case illustrating the bug.
In passing, provide some comments for the sadly naked functions in
tsquery_util.c, and simplify some baroque logic in QTNFree(), which
I think may have been leaking some items it intended to free.
Noted while investigating a complaint from Andreas Seltenreich.
Back-patch to all supported versions.
In the previous coding, if an aggregate's transition function returned an
expanded array, nodeAgg.c and nodeWindowAgg.c would always copy it and thus
force it into the flat representation. This led to ping-ponging between
flat and expanded formats, which costs a lot. For an aggregate using
array_append as transition function, I measured about a 15X slowdown
compared to the pre-9.5 code, when working on simple int[] arrays.
Of course, the old code was already O(N^2) in this usage due to copying
flat arrays all the time, but it wasn't quite this inefficient.
To fix, teach nodeAgg.c and nodeWindowAgg.c to allow expanded transition
values without copying, so long as the transition function takes care to
return the transition value already properly parented under the aggcontext.
That puts a bit of extra responsibility on the transition function, but
doing it this way allows us to not need any extra logic in the fast path
of advance_transition_function (ie, with a pass-by-value transition value,
or with a modified-in-place pass-by-reference value). We already know
that that's a hot spot so I'm loath to add any cycles at all there. Also,
while only array_append currently knows how to follow this convention,
this solution allows other transition functions to opt-in without needing
to have a whitelist in the core aggregation code.
(The reason we would need a whitelist is that currently, if you pass a
R/W expanded-object pointer to an arbitrary function, it's allowed to do
anything with it including deleting it; that breaks the core agg code's
assumption that it should free discarded values. Returning a value under
aggcontext is the transition function's signal that it knows it is an
aggregate transition function and will play nice. Possibly the API rules
for expanded objects should be refined, but that would not be a
back-patchable change.)
With this fix, an aggregate using array_append is no longer O(N^2), so it's
much faster than pre-9.5 code rather than much slower. It's still a bit
slower than the bespoke infrastructure for array_agg, but the differential
seems to be only about 10%-20% rather than orders of magnitude.
Discussion: <6315.1477677885@sss.pgh.pa.us>
