executed in read_only mode. This could lead to various relatively-subtle
failures, such as an allegedly stable function returning non-stable results.
Bug goes all the way back to the introduction of read-only mode in 8.0.
Per report from Gaetano Mendola.
available information about the typmod of an expression; namely, Const,
ArrayRef, ArrayExpr, and EXPR and ARRAY SubLinks. In the ArrayExpr and
SubLink cases it wasn't really the data structure's fault, but exprTypmod()
being lazy. This seems like a good idea in view of the expected increase in
typmod usage from Teodor's work to allow user-defined types to have typmods.
In particular this responds to the concerns we had about eliminating the
special-purpose hack that exprTypmod() used to have for BPCHAR Consts.
We can now tell whether or not such a Const has been cast to a specific
length, and report or display properly if so.
initdb forced due to changes in stored rules.
uses SPI plans, this finally fixes the ancient gotcha that you can't
drop and recreate a temp table used by a plpgsql function.
Along the way, clean up SPI's API a little bit by declaring SPI plan
pointers as "SPIPlanPtr" instead of "void *". This is cosmetic but
helps to forestall simple programming mistakes. (I have changed some
but not all of the callers to match; there are still some "void *"'s
in contrib and the PL's. This is intentional so that we can see if
anyone's compiler complains about it.)
did not expect that a DEAD tuple could follow a RECENTLY_DEAD tuple in an
update chain, but because the OldestXmin rule for determining deadness is a
simplification of reality, it is possible for this situation to occur
(implying that the RECENTLY_DEAD tuple is in fact dead to all observers,
but this patch does not attempt to exploit that). The code would follow a
chain forward all the way, but then stop before a DEAD tuple when backing
up, meaning that not all of the chain got moved. This could lead to copying
the chain multiple times (resulting in duplicate copies of the live tuple at
its end), or leaving dangling index entries behind (which, aside from
generating warnings from later vacuums, creates a risk of wrong query
results or bogus duplicate-key errors once the heap slot the index entry
points to is repopulated).
The fix is to recheck HeapTupleSatisfiesVacuum while following a chain
forward, and to stop if a DEAD tuple is reached. Each contiguous group
of RECENTLY_DEAD tuples will therefore be copied as a separate chain.
The patch also adds a couple of extra sanity checks to verify correct
behavior.
Per report and test case from Pavan Deolasee.
module and teach PREPARE and protocol-level prepared statements to use it.
In service of this, rearrange utility-statement processing so that parse
analysis does not assume table schemas can't change before execution for
utility statements (necessary because we don't attempt to re-acquire locks
for utility statements when reusing a stored plan). This requires some
refactoring of the ProcessUtility API, but it ends up cleaner anyway,
for instance we can get rid of the QueryContext global.
Still to do: fix up SPI and related code to use the plan cache; I'm tempted to
try to make SQL functions use it too. Also, there are at least some aspects
of system state that we want to ensure remain the same during a replan as in
the original processing; search_path certainly ought to behave that way for
instance, and perhaps there are others.
even if none of the fields in the pg_class row change. This behavior is
necessary to ensure other backends flush rd_targblock values that might
point to truncated-away pages. We got this right pre-8.2 but it was broken
by overoptimistic change to not write out the pg_class row if unchanged.
Per report from Pavan Deolasee.
check_sql_fn_retval allows binary-compatibility cases, the expression
extracted from an inline-able SQL function might have a type that is only
binary-compatible with the declared function result type. To avoid possibly
changing the semantics of the expression, we should insert a RelabelType node
in such cases. This has only been shown to have bad consequences in recent
8.1 and up releases, but I suspect there may be failure cases in the older
branches too, so patch it all the way back. Per bug #3116 from Greg Mullane.
Along the way, fix an omission in eval_const_expressions_mutator: it failed
to copy the relabelformat field when processing a RelabelType. No known
observable failures from this, but it definitely isn't intended behavior.
fixup various places in the tree that were clearing a StringInfo by hand.
Making this function a part of the API simplifies client code slightly,
and avoids needlessly peeking inside the StringInfo interface.
log_min_messages does; and arrange to suppress the duplicative output
that would otherwise result from log_statement and log_duration messages.
Bruce Momjian and Tom Lane.
this, add a 16-bit "flags" field to page headers by stealing some bits from
pd_tli. We use one flag bit as a hint to indicate whether there are any
unused line pointers; the remaining 15 are available for future use.
This is a cut-down form of an idea proposed by Hiroki Kataoka in July 2005.
At the time it was rejected because the original patch increased the size of
page headers and it wasn't clear that the benefit outweighed the distributed
cost. The flag-bit approach gets most of the benefit without requiring an
increase in the page header size.
Heikki Linnakangas and Tom Lane
Get rid of VARATT_SIZE and VARATT_DATA, which were simply redundant with
VARSIZE and VARDATA, and as a consequence almost no code was using the
longer names. Rename the length fields of struct varlena and various
derived structures to catch anyplace that was accessing them directly;
and clean up various places so caught. In itself this patch doesn't
change any behavior at all, but it is necessary infrastructure if we hope
to play any games with the representation of varlena headers.
Greg Stark and Tom Lane
parent query's EState. Now that there's a single flat rangetable for both
the main plan and subplans, there's no need anymore for a separate EState,
and removing it allows cleaning up some crufty code in nodeSubplan.c and
nodeSubqueryscan.c. Should be a tad faster too, although any difference
will probably be hard to measure. This is the last bit of subsidiary
mop-up work from changing to a flat rangetable.
is still needed despite cleanups in setrefs.c, because the point is to
let the inserted Result node compute a different tlist than its input
node does. Per example from Jeremy Drake.
drill down into subplan targetlists to print the referent expression for an
OUTER or INNER var in an upper plan node. Hence, make it do that always, and
banish the old hack of showing "?columnN?" when things got too complicated.
Along the way, fix an EXPLAIN bug I introduced by suppressing subqueries from
execution-time range tables: get_name_for_var_field() assumed it could look at
rte->subquery to find out the real type of a RECORD var. That doesn't work
anymore, but instead we can look at the input plan of the SubqueryScan plan
node.
and quals have varno OUTER, rather than zero, to indicate a reference to
an output of their lefttree subplan. This is consistent with the way
that every other upper-level node type does it, and allows some simplifications
in setrefs.c and EXPLAIN.
useless substructure for its RangeTblEntry nodes. (I chose to keep using the
same struct node type and just zero out the link fields for unneeded info,
rather than making a separate ExecRangeTblEntry type --- it seemed too
fragile to have two different rangetable representations.)
Along the way, put subplans into a list in the toplevel PlannedStmt node,
and have SubPlan nodes refer to them by list index instead of direct pointers.
Vadim wanted to do that years ago, but I never understood what he was on about
until now. It makes things a *whole* lot more robust, because we can stop
worrying about duplicate processing of subplans during expression tree
traversals. That's been a constant source of bugs, and it's finally gone.
There are some consequent simplifications yet to be made, like not using
a separate EState for subplans in the executor, but I'll tackle that later.
I refactored findsplitloc and checksplitloc so that the division of
labor is more clear IMO. I pushed all the space calculation inside the
loop to checksplitloc.
I also fixed the off by 4 in free space calculation caused by
PageGetFreeSpace subtracting sizeof(ItemIdData), even though it was
harmless, because it was distracting and I felt it might come back to
bite us in the future if we change the page layout or alignments.
There's now a new function PageGetExactFreeSpace that doesn't do the
subtraction.
findsplitloc now tries the "just the new item to right page" split as
well. If people don't like the refactoring, I can write a patch to just
add that.
Heikki Linnakangas
storing mostly-redundant Query trees in prepared statements, portals, etc.
To replace Query, a new node type called PlannedStmt is inserted by the
planner at the top of a completed plan tree; this carries just the fields of
Query that are still needed at runtime. The statement lists kept in portals
etc. now consist of intermixed PlannedStmt and bare utility-statement nodes
--- no Query. This incidentally allows us to remove some fields from Query
and Plan nodes that shouldn't have been there in the first place.
Still to do: simplify the execution-time range table; at the moment the
range table passed to the executor still contains Query trees for subqueries.
initdb forced due to change of stored rules.
this code was last gone over, there wasn't really any alternative to
globals because we didn't have the PlannerInfo struct being passed all
through the planner code. Now that we do, we can restructure things
to avoid non-reentrancy. I'm fooling with this because otherwise I'd
have had to add another global variable for the planned compact
range table list.
plan nodes, so that the executor does not need to get these items from
the range table at runtime. This will avoid needing to include these
fields in the compact range table I'm expecting to make the executor use.
portals using PORTAL_UTIL_SELECT strategy. This is currently significant only
for FETCH queries, which are supposed to include a count in the tag. Seems
it's been broken since 7.4, but nobody noticed before Knut Lehre.
equal functions are checked for raw parse trees as well as post-analysis
trees. This was never very important before, but the upcoming plan cache
control module will need to be able to do copyObject() on raw parse trees.
